®
Intel Desktop Board
D865GVHZ Product Guide
Order Number: C70845-001
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This Product Guide gives information about board layout, component installation, BIOS Setup
menus, and regulatory requirements for Intel® Desktop Board D865GVHZ.
Intended Audience
The Product Guide is intended for technically qualified personnel.
Information Layout
The chapters in this Product Guide are arranged as follows:
board and other hardware components.
Conventions
The following conventions are used in this manual:
WARNING
Warnings indicate conditions that, if not observed, can cause personal injury.
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Notations
Term
GB
KB
Description
Gigabyte (1,073,741,824 bytes)
Kilobyte (1024 bytes)
MB
Mbit
MHz
*
Megabyte (1,048,576 bytes)
Megabit (1,048,576 bits)
Megahertz (one million hertz)
Third-party brands and names that are the property of their respective owners.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1 Desktop Board Features
Intel® 865GV Chipset ..........................................................................................................15
RJ-45 LAN Connector LEDs.......................................................................................15
Input/Output (I/O) Controller................................................................................................16
Security Passwords....................................................................................................17
Power Connectors......................................................................................................18
Suspend to RAM (Instantly Available PC Technology) ...............................................19
PME# Wakeup Support..............................................................................................20
2 Installing and Replacing Desktop Board Components
Before You Begin................................................................................................................21
Chassis and Component Certifications.......................................................................23
Installing and Removing the Desktop Board........................................................................25
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Installing the Processor Fan Heat Sink.......................................................................26
Connecting the Processor Fan Heat Sink Cable.........................................................27
Removing DIMMs.......................................................................................................29
Connecting the IDE Cable...................................................................................................30
Connecting the Serial ATA Cable........................................................................................31
Connecting the Chassis Intrusion Cable.....................................................................37
Add-In Card and Peripheral Interface Connectors...............................................................38
Clearing BIOS Passwords...................................................................................................40
Replacing the Battery..........................................................................................................42
3 Updating the BIOS
Updating the BIOS with the Intel® Express BIOS Update Utility...........................................47
Updating the BIOS with the Iflash Memory Update Utility....................................................48
4 Using the BIOS Setup Program
PCI Configuration Submenu.......................................................................................55
Event Log Configuration Submenu.............................................................................63
Video Configuration Submenu....................................................................................64
Chipset Configuration Submenu.................................................................................66
Security Menu.....................................................................................................................69
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Boot Device Priority Submenu....................................................................................73
Exit Menu............................................................................................................................77
5 Desktop Board Resources
Memory Map.......................................................................................................................79
DMA Channels....................................................................................................................79
A Error Messages and Indicators
B Regulatory Compliance
Safety Regulations..............................................................................................................85
Figures
1. Desktop Board D865GVHZ Components......................................................................11
2. Installing the I/O Shield.................................................................................................24
3. Location of Mounting Screw Holes................................................................................25
4. Installing a Processor....................................................................................................26
6. Installing a Memory Module ..........................................................................................28
7. Connecting the IDE Cable ............................................................................................31
8. Connecting the Serial ATA Cable .................................................................................32
9. Internal Headers...........................................................................................................33
10. Location of Hardware Control Headers and Power Connectors ....................................36
11. PCI Bus Add-in Card and Peripheral Interface Connectors...........................................38
Tables
1. Feature Summary...........................................................................................................9
2. Desktop Board Components.........................................................................................12
3. Supported Processors ..................................................................................................13
4. RJ-45 10/100 Ethernet LAN Connector LEDs...............................................................16
5. Front Panel Header ......................................................................................................34
6. USB 2.0 Header............................................................................................................34
7. Front Panel Audio Header Signal Names......................................................................35
8. Jumper Settings for the BIOS Setup Program Modes...................................................39
9. BIOS Setup Program Menu Bar....................................................................................51
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
11. Maintenance Menu .......................................................................................................52
15. Boot Configuration Submenu........................................................................................56
18. PATA Submenus ..........................................................................................................60
22. USB Configuration Submenu........................................................................................65
24. Hardware Management ................................................................................................68
25. Security Menu...............................................................................................................69
27. ACPI Submenu.............................................................................................................71
28. Boot Menu ....................................................................................................................72
34. System Memory Map....................................................................................................79
36. Interrupts ......................................................................................................................80
38. BIOS Error Messages...................................................................................................82
39. Safety Regulations........................................................................................................85
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Desktop Board Features
summarizes these features.
Table 1.
Feature Summary
MicroATX at 9.6-inches by 8.5-inches
Form Factor
Support for:
• Intel® Pentium® 4 processor (2.2 GHz or higher) in the mPGA478-pin
package with 800/533/400 MHz system bus
• Intel® Celeron® processor (2.0 GHz or higher) in the mPGA478-pin package
with 400 MHz system bus
• Two 184-pin, 2.5 V DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Dual channel 400/333/266 MHz DDR SDRAM interface
• Designed to support up to 4 GB of system memory
Intel® 865GV chipset consisting of:
• Intel® 82865GV Graphics and Memory Controller Hub (GMCH) with
Accelerated Hub Architecture (AHA) bus
• Intel® 82801EB I/O Controller Hub (ICH5)
• 4 Mbit Firmware Hub (FWH)
• Intel 865GV chipset
• Integrated Intel® Extreme Graphics 2
• Intel 865GV chipset (AC ’97)
• Realtek* audio codec
Intel® Pro 10/100 Ethernet LAN (Intel® 82502EZ) and RJ-45 connector
LAN (optional)
Peripheral Interfaces
• Up to eight USB 2.0 ports
—
—
Four ports routed to the back panel
Four ports routed to two internal USB headers
• Two IDE interfaces with Ultra DMA-33 and ATA-66/100 support
• Two Serial ATA (SATA) connectors
• One diskette drive interface
• One parallel port
• One serial port
• One VGA port
• PS/2* keyboard and mouse ports
Three PCI bus add-in card connectors (SMBus routed to PCI bus 2)
• Intel/AMI BIOS
• 4 Mbit symmetrical flash memory
• Support for SMBIOS
• Support for Advanced Configuration and Power Interface (ACPI)
• Suspend to RAM (STR)
• Wake on USB, PCI, RS-232, PS/2, LAN, and front panel
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Table 1.
Feature Summary (continued)
Hardware Management Hardware monitor with:
• Three fan sensing inputs
• Temperature sensing
• Intel® Precision Cooling Technology fan speed control that automatically
adjusts chassis fan speed based on system temperature
• Voltage sensing
Related Links
For more information about Intel Desktop Board D865GVHZ, including the Technical Product
Specification (TPS), BIOS updates, and device drivers, go to:
Supported Operating Systems
The desktop board supports the following operating systems:
•
•
•
•
Microsoft Windows* 98 SE
Microsoft Windows Me
Microsoft Windows 2000 Professional
Microsoft Windows XP Professional
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Desktop Board Components
Figure 1 shows the approximate location of the major components on Desktop Board D865GVHZ.
Line
In
USB 2.0
USB 2.0
B
C
A
D
X
E
W
V
U
F
G
H
T
S
R
I
Q
L
M
O
N
K
P
J
OM17019
Figure 1. Desktop Board D865GVHZ Components
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Table 2.
Desktop Board Components
Label
A
Description
CD-ROM audio connector (ATAPI-style)
Front panel audio header
Rear chassis fan header
12 V processor core voltage connector
Processor socket
B
C
D
E
F
Processor fan header
Intel 82865GV (GMCH)
DIMM sockets
G
H
I
Main power connector
Diskette drive connector
Primary IDE connector
Secondary IDE connector
Front chassis fan header
BIOS configuration jumper
Alternate power/sleep LED header
Front panel header
J
K
L
M
N
O
P
Q
R
S
Chassis intrusion header
Serial ATA connectors
USB 2.0 header
T
Intel 82801EB (ICH5)
Speaker
U
V
Battery
W
X
USB 2.0 header
PCI bus add-in card connectors
Related Links
Go to the following links for the latest information about:
•
•
•
•
Intel Desktop Board D865GVHZ, http://www.intel.com/design/motherbd
Audio software and utilities, http://www.intel.com/design/motherbd
LAN software and drivers, http://www.intel.com/design/motherbd
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Processor
CAUTION
Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power
supply connector to Desktop Board D865GVHZ may result in damage to the desktop board and/or
power supply.
Desktop Board D865GVHZ supports a single Intel Pentium 4 processor or Intel Celeron processor.
Processors are not included with the desktop board and must be purchased separately.
The processor connects to the Intel desktop board through the mPGA478-pin socket. The Intel®
processors may be removed and replaced to accommodate supported higher speed processors.
Desktop Board D865GVHZ supports the processors listed in Table 3.
Table 3.
Type
Supported Processors
Designation (GHz)
FSB Frequency (MHz)
L2 Cache (KB)
1024
Intel® Pentium® 4 processor
featuring Hyper-Threading
Technology
3.40E, 3.20E, 2.80E
800
800
3.2, 3.0, 2.80C, 2.60C,
2.40C
512
3.06
533
533
533
512
Intel Pentium 4 processor
2.80A, 2.40A
1024
512
2.8, 2.66, 2.53, 2.4B, and
2.26
2.6, 2.5, 2.40, 2.20, 2A,
1.80A, and 1.60A
400
400
512
128
Intel® Celeron® processor
2.8, 2.7, 2.6, 2.5, 2.4, 2.3,
2.2, 2.1, and 2.0
Desktop Board D865GVHZ requires an ATX12V compliant power supply to function according to
desktop board specifications. The board has two ATX12V compliant power supply connectors that
are needed to provide extra power to the Intel 865GV chipset and Intel processor.
Related Links
Go to the following link or sections in this manual for more information about:
•
The latest supported Intel processors for Desktop Board D865GVHZ
•
•
The location of the ATX12V compliant power supply connectors, page 37
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Main Memory
NOTE
To be fully compliant with all applicable Intel® SDRAM memory specification addendums, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. If your memory modules do not support SPD, you will see a notification to this effect on
the screen at power up. The BIOS will attempt to configure the memory controller for normal
operation.
The desktop board supports system memory as defined below:
•
Dual channel and up to four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory
Module (DIMMs) connectors with gold-plated contacts.
•
Supported memory configurations are:
Front Side Bus Frequency
(MHz)
Memory Speed Outcome
(MHz)
Memory Speed
Processor
DDR400
DDR333
Pentium 4 processor
Pentium 4 processor
800
800
533
400
400
320
333
266
Pentium 4 processor
or Celeron processor
DDR266
Pentium 4 processor
Celeron processor
533 or 400
400
266
266
•
Support for:
Unbuffered, non-registered DIMMs
Serial Presence Detect (SPD) memory only
Support for Suspend to RAM (STR), S3 ACPI state
Non-ECC DDR
2.5 V memory
NOTE
System resources, such as PCI, require physical memory address locations that reduce available
memory addresses above 3 GB. This may result in less than 4 GB of memory being available to the
operating system and applications.
Related Links
Go to the following links or section in this manual for more information about:
•
•
•
The latest list of tested memory, http://support.intel.com/support/motherboards/desktop/
SDRAM specifications, http://www.intel.com/technology/memory/pcsdram/spec/
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Intel® 865GV Chipset
The Intel 865GV chipset consists of the following devices:
•
•
•
Intel 82865GV Graphics and Memory Controller Hub (GMCH) with AHA bus
Intel 82801EB I/O Controller Hub (ICH5) with AHA bus
Firmware Hub (FWH)
Related Link
For more information about the Intel 865GV chipset, go to:
Graphics Subsystem
The graphics subsystem features the following:
•
•
The Intel 865GV chipset
Intel Extreme Graphics 2
Audio Subsystem
The audio subsystem features the following:
•
•
Intel 865GV chipset (AC ’97)
Realtek ALC202A audio codec
Related Links
Go to the following link or sections in this manual for more information about:
•
•
Audio drivers and utilities, http://support.intel.com/support/motherboards/desktop/
LAN Subsystem
The optional LAN provides a Fast PCI LAN subsystem. The LAN subsystem provides the
following functions:
•
•
•
•
10/100 Ethernet LAN (Intel 82502EZ)
Support for RJ-45 connector with status indicator LEDs
Programmable transit threshold
Configurable EEPROM that contains the MAC address
LAN Subsystem Software
For LAN software and drivers, refer to the D865GVHZ link on Intel’s World Wide Web site at:
RJ-45 LAN Connector LEDs
board is powered up and the 10/100 Ethernet LAN subsystem is operating.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Table 4.
RJ-45 10/100 Ethernet LAN Connector LEDs
LED Color
LED State
Indicates
Green
Off
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
LAN link is not established.
LAN link is established.
On
Yellow
Off
On (steady state)
On (brighter and pulsing) The computer is communicating with another computer on the
LAN.
Input/Output (I/O) Controller
The super I/O controller features the following:
•
•
•
Low pin count (LPC) interface
One serial port
One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) support
•
•
•
•
•
Serial IRQ interface compatible with serialized IRQ support for PCI systems
PS/2-style mouse and keyboard interfaces
Interface for one 1.44 MB or 2.88 MB diskette drive
Intelligent power management, including a programmable wake up event interface
PCI power management support
Hi-Speed USB 2.0 Support
NOTE
Computer systems that have an unshielded cable attached to a USB port might not meet FCC
Class B requirements, even if no device or a low-speed USB device is attached to the cable.
Use a shielded cable that meets the requirements for a full-speed USB device.
The desktop board supports up to eight USB 2.0 ports via ICH5; four ports routed to the back
panel and four routed to two internal USB 2.0 headers. USB 2.0 ports are backward compatible
with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.
Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This may be
required to accommodate operating systems that do not support USB 2.0.
NOTE
USB devices are limited to USB 1.1 transfer rates prior to operating system and driver
initialization.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Enhanced IDE Interface
The ICH5’s IDE interface handles the exchange of information between the processor and
peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside the computer.
The interface supports:
•
•
•
•
•
Up to four IDE devices (such as hard drives)
ATAPI-style devices (such as CD-ROM drives)
Older PIO Mode devices
Ultra DMA-33 and ATA-66/100 protocols
Laser Servo (LS-120) drives
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI and IDE
auto-configuration utilities, and the video BIOS. The BIOS is stored in the Firmware Hub.
PCI Auto Configuration
If you install a PCI add-in card in your computer, the PCI auto-configuration utility in the BIOS
automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that
add-in card. You do not need to run the BIOS Setup program after you install a PCI add-in card.
SATA/IDE Auto Configuration
If you install a SATA or IDE device (such as a hard drive) in your computer, the SATA/IDE auto-
configuration utility in the BIOS automatically detects and configures the device for your computer.
You do not need to run the BIOS Setup program after installing a SATA/IDE device. You can
override the auto-configuration options by specifying manual configuration in the BIOS Setup
program.
To use ATA-66/100 features, the following items are required:
•
•
•
An ATA-66/100 peripheral device
An ATA-66/100 compatible cable
ATA-66/100 operating system device drivers
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the computer. A supervisor password and a user password can be set for the
Setup and for booting the computer, with the following restrictions:
•
The supervisor password gives unrestricted access to view and change all Setup options. If
only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives the
user restricted access to Setup.
•
If both the supervisor and user passwords are set, you must enter either the supervisor password
or the user password to access Setup. Setup options are then available for viewing and
changing depending on whether the supervisor or user password was entered.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
•
Setting a user password restricts who can boot the computer. The password prompt is
displayed before the computer is booted. If only the supervisor password is set, the computer
boots without asking for a password. If both passwords are set, you can enter either password
to boot the computer.
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has been removed.
The security feature uses a mechanical switch on the chassis that can be connected to the chassis
intrusion header.
Power Management Features
Power management is implemented at several levels, including:
•
•
Advanced Configuration and Power Interface (ACPI)
Hardware support:
Power connectors
Fan connectors
Suspend to RAM (Instantly Available PC technology)
Resume on Ring
Wake from USB
Wake from PS/2 keyboard/mouse
PME# wakeup support
ACPI
ACPI gives the operating system direct control over the power management and Plug & Play
functions of a computer. The use of ACPI with the desktop board requires an operating system that
provides full ACPI support.
Power Connectors
power connectors.
Fan Connectors
The desktop board has two chassis fan connectors (Intel Precision Cooling Technology) and one
®
Fan Speed Control (Intel Precision Cooling Technology)
Intel Precision Cooling Technology automatically adjusts the chassis fan speeds depending on the
system’s temperature. This feature reduces system fan noise by lowering the speed of the chassis
fans connected to the front and rear chassis fan connectors. The processor fan connector is not
controlled.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
The fan speed control feature can be disabled in the BIOS, resulting in the chassis fans always
operating at full speed. This feature should be disabled if a self-controlled fan is attached to a
chassis fan connector.
Overall system noise reduction will vary based on system configuration and environment.
Suspend to RAM (Instantly Available PC Technology)
CAUTION
For Instantly Available PC technology, the 5 V standby line for the power supply must be capable
of delivering adequate +5 V standby current. Failure to provide adequate standby current when
using this feature can damage the power supply and/or effect ACPI S3 sleep state functionality.
Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-to-RAM) sleep
state. While in the S3 sleep state, the computer will appear to be off. When signaled by a wake-up
device or event, the system quickly returns to its last known awake state.
If the system has a dual-colored power LED on the front panel, the sleep state is indicated by the
LED turning amber.
CAUTION
Power supplies used with this desktop board must be able to provide enough standby current to
support the standard Instantly Available (ACPI S3 sleep state) configuration. If the standby
current necessary to support multiple wake events from the PCI and/or USB buses exceeds power
supply capacity, the desktop board may lose register settings stored in memory.
Related Link
For more information about standby current requirements for these desktop boards, refer to the TPS
by selecting the Technical Documentation link at:
Resume on Ring
The operation of Resume on Ring can be summarized as follows:
•
•
•
•
Resumes operation from either ACPI S1 or ACPI S3 state
Requires only one call to access the computer
Detects incoming call similarly for external and internal modems
Requires modem interrupt be unmasked for correct operation
Wake from USB
USB bus activity wakes the computer from an ACPI S1 or S3 state.
NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB.
Wake from PS/2 Keyboard/Mouse
PS/2 keyboard/mouse activity wakes the computer from an ACPI S1 or S3 state.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
PME# Wakeup Support
When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3,
or S5 state.
Speaker
A speaker is mounted on the desktop board. The speaker provides audible error code (beep code)
Battery
The battery on the desktop board keeps the values in CMOS RAM and the clock current when the
Real-Time Clock
The desktop board has a time-of-day clock and 100-year calendar. The battery on the desktop
board keeps the clock current when the computer is turned off.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Installing and Replacing Desktop
Board Components
This chapter tells you how to:
•
•
•
•
•
•
•
•
•
•
•
Install the I/O shield
Install and remove the desktop board
Install and remove a processor and memory
Connect the IDE and/or Serial ATA cable
Connect internal headers
Connect hardware control and power cables
Locate the add-in card and peripheral interface connectors
Set the BIOS configuration jumper
Clear passwords
Identify back panel connectors
Replace the battery
Before You Begin
WARNINGS
The procedures in this chapter assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance required for using
and modifying electronic equipment.
Disconnect the computer from its power source and from any telecommunications links,
networks, or modems before performing any of the procedures described in this chapter. Failure
to disconnect power, telecommunications links, networks, or modems before you open the
computer or perform any procedures can result in personal injury or equipment damage. Some
circuitry on the board can continue to operate even though the front panel power button is off.
CAUTION
Many of the internal and front panel connectors provide operating voltage (+5 V dc and +12 V dc,
for example) to devices inside the computer chassis, such as fans and internal peripherals. These
connectors are not overcurrent protected. Do not use these connectors for powering devices
external to the computer chassis. A fault in the load presented by the external devices could cause
damage to the computer, the interconnecting cable, and the external devices themselves.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Follow these guidelines before you begin:
•
•
Always follow the steps in each procedure in the correct order.
Set up a log to record information about your computer, such as model, serial numbers,
installed options, and configuration information.
•
Electrostatic discharge (ESD) can damage components. Perform the procedures described in
this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam
pad. If such a station is not available, you can provide some ESD protection by wearing an
antistatic wrist strap and attaching it to a metal part of the computer chassis.
Installation Precautions
When you install and test the Intel desktop board, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
•
•
•
•
•
Sharp pins on connectors
Sharp pins on printed circuit assemblies
Rough edges and sharp corners on the chassis
Hot components (like processors, voltage regulators, and heat sinks)
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.
Installation Instructions
CAUTION
Follow these guidelines to meet safety and regulatory requirements when installing this board
assembly.
Read and adhere to all of these instructions and the instructions supplied with the chassis and
associated modules. If the instructions for the chassis are inconsistent with these instructions or the
instructions for associated modules, contact the supplier’s technical support to find out how you can
ensure that your computer meets safety and regulatory requirements. If you do not follow these
instructions and the instructions provided by chassis and module suppliers, you increase safety risk
and the possibility of noncompliance with regional laws and regulations.
Ensure Electromagnetic Compatibility (EMC) Compliance
Before computer integration, make sure that the power supply and other modules or peripherals, as
applicable, have passed Class B EMC testing and are marked accordingly.
In the installation instructions for the host chassis, power supply, and other modules pay close
attention to the following:
•
•
•
•
Product certifications or lack of certifications
External I/O cable shielding and filtering
Mounting, grounding, and bonding requirements
Keying connectors when mating the wrong connectors could be hazardous
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
If the power supply and other modules or peripherals, as applicable, are not Class B EMC
compliant before integration, then EMC testing is required on a representative sample of the newly
completed computer.
Chassis and Component Certifications
Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring,
and cables; are components certified for the country or market where used. Agency certification
marks on the product are proof of certification. Typical product certifications include:
•
In Europe
The CE marking signifies compliance with all applicable European requirements. If the chassis
and other components are not properly CE marked, a supplier’s Declaration of Conformity
statement to the European EMC directive and Low Voltage directive (as applicable), should be
obtained. Additionally, other directives, such as the Radio and Telecommunications Terminal
Equipment (R&TTE) directive may also apply depending on product features.
In the United States
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL, CSA,
or ETL signifies compliance with safety requirements. Wiring and cables must also be UL
listed or recognized and suitable for the intended use. The FCC Class B logo for home or
office use signifies compliance with electromagnetic interference (EMI) requirements.
In Canada
•
•
A nationally recognized certification mark such as CSA or cUL signifies compliance with
safety requirements. The Industry Canada statement at the front of this product guide
demonstrates compliance with Canadian EMC regulations. Industry Canada recognizes and
accepts FCC certification as denoting compliance with national electromagnetic interference
(emissions) requirements.
Prevent Power Supply Overload
Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits.
Place Battery Marking
There is insufficient space on this desktop board to provide instructions for replacing and disposing
of the Lithium ion coin cell battery. For system safety certification, the following statement or
equivalent statement is required to be permanently and legibly marked on the chassis near the
battery.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
where possible. Disposal of used batteries must be in accordance with local environmental
regulations.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Use Only for Intended Applications
All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in
personal computers for installation in homes, offices, schools, computer rooms, and similar
locations. The suitability of this product for other applications or environments, such as medical,
industrial, alarm systems, test equipment, etc. may require further evaluation.
Related Links
Installing the I/O Shield
The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio
frequency transmissions, protects internal components from dust and foreign objects, and promotes
correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place the shield inside the
chassis as shown in Figure 2. Press the shield into place so that it fits tightly and securely. If the
shield doesn’t fit, obtain a properly-sized shield from the chassis supplier.
OM17020
Figure 2. Installing the I/O Shield
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing and Removing the Desktop Board
WARNING
Only qualified technical personnel should do this procedure. Disconnect the computer from its
power source before performing the procedures described here. Failure to disconnect the power
before you open the computer can result in personal injury or equipment damage.
NOTE
Refer to Appendix B for regulatory requirements.
Refer to your chassis manual for instructions on installing and removing the desktop board.
Figure 3 shows the location of the six mounting screw holes for Desktop Board D865GVHZ.
OM17021
Figure 3. Location of Mounting Screw Holes
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Installing and Removing a Processor
Instructions on how to install the processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure that AC power has been removed by
unplugging the power cord from the computer. Failure to do so could damage the processor and
the board.
To install a processor, follow these instructions:
2. Locate the processor socket and raise the socket lever completely.
3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner
4. Lower the lever to its original position.
A
OM15028
Figure 4. Installing a Processor
Installing the Processor Fan Heat Sink
Desktop Board D865GVHZ has an integrated processor fan heat sink retention mechanism (RM).
For instructions on how to install the processor fan heat sink to the integrated processor fan heat
sink RM, refer to the boxed processor manual or the Intel World Wide Web site at:
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting the Processor Fan Heat Sink Cable
OM17022
Figure 5. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Connector
Removing the Processor
For instruction on how to remove the processor fan heat sink and processor, refer to the processor
installation manual or the Intel World Wide Web site at:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Installing and Removing Memory
CAUTION
To be fully compliant with all applicable Intel SDRAM memory specification addendums, the board
requires DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the
PC Serial Presence Detect Specification at:
Desktop Board D865GVHZ has two 184-pin DIMM sockets arranged as Channel A and
Channel B, as shown in Figure 6.
CHANNEL A
CHANNEL B
OM17023
Figure 6. Installing a Memory Module
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing DIMMs
To install DIMMs, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
5. Holding the DIMM by the edges, remove it from its anti-static package.
6. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM
7. Insert the bottom edge of the DIMM into the socket.
8. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place. Make sure the clips are firmly in place.
9. Replace the computer’s cover and reconnect the AC power cord.
Removing DIMMs
To remove a memory module, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer.
3. Remove the AC power cord from the computer.
4. Remove the computer’s cover.
5. Gently open the retaining clips at each end of the DIMM socket. The DIMM pops out of
the socket.
6. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package.
7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
8. Replace the computer’s cover and reconnect the AC power cord.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Connecting the IDE Cable
The two IDE cables support the Ultra DMA-33 and ATA-66/100 transfer protocols. Each of the
cable.
NOTE
ATA-66/100 compatible cables are backward compatible with drives using slower IDE transfer
protocols. If an ATA-66/100 disk drive and a disk drive using any other IDE transfer protocol are
attached to the same cable, the maximum transfer rate between the drives may be reduced to that of
the slowest drive.
NOTE
Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For
example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive.
For correct function of the cable:
•
•
•
Attach the cable end with the single connector to the Intel desktop board (A).
Attach the cable end with the two closely spaced connectors to the drives (B).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
A
B
OM17024
Figure 7. Connecting the IDE Cable
Connecting the Serial ATA Cable
The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. Either end of the cable can be connected to the SATA drive or the connector on the
For correct cable function:
1. Observe the precaution in “Before You Begin” on page 23.
2. Attach either cable end to the connector (A) on the board.
3. Attach either cable end to the connector (B) on the drive.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting Internal Headers
Figure 9 shows the location of internal headers.
1
3
5
7
9
2
4
6
A
10
F
4
3
1
2
1
2
4
6
8
3
5
7
E
D
10
1
3
5
7
2
4
6
8
10
B
3
1
4
2
1
8
7
6
C
9
3
5
OM17026
Item
A
Description
Front panel audio
B
Alternate power/sleep LED
Front panel
C
D
USB 2.0
E
USB 2.0
F
CD-ROM audio
Figure 9. Internal Headers
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Connecting the Front Panel Header
Before connecting the front panel header, observe the precautions in “Before You Begin” on
assignments for the front panel header.
Table 5.
Front Panel Header
In/Out Description
Hard Drive Activity LED
Pin Signal
Pin Signal
In/Out Description
Power LED
HDR_BLNK_GRN Out Front panel green
1
3
HD_PWR
Out
Hard disk LED pull-
up (330 Ω) to +5 V
2
4
LED
HDA#
Out
Hard disk active LED
HDR_BLNK_YEL Out
Front panel yellow
LED
Reset Switch
On/Off Switch
SWITCH_ON# In
Ground
5
7
9
Ground
Ground
6
8
Power switch
Ground
FP_RESET# In
+5 V Out
Reset switch
Power
10 N/C
Not connected
Connecting the USB 2.0 Header
assignments for the header.
Table 6.
USB 2.0 Header
USB Port A
USB Port B
Signal Name
Pin
1
Signal Name
Pin
2
Power
D-
Power
D-
3
4
5
D+
6
D+
7
Ground
Key (no pin)
8
Ground
Not connected
9
10
Note: USB ports may be assigned as needed.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing a Front Panel Audio Solution
for the front panel audio header.
Table 7.
Front Panel Audio Header Signal Names
Pin
1
Signal Name
AUD-MIC
Pin
2
Signal Name
AUD-GND
AUD-VCC
AUD-RET-R
KEY
3
AUD-MIC-BIAS
AUD-FPOUT-R
HP-ON
4
5
6
7
8
9
AUD-FPOUT-L
10
AUD-RET-L
To install the cable that connects the front panel audio solution to the front panel audio header,
follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Locate the front panel audio header. Remove the two jumpers from the header to disable the
back panel audio connectors.
5. Install a correctly keyed and shielded front panel audio cable.
6. Connect the audio cable to the front panel audio solution.
7. Replace the cover.
To restore back panel operations, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel audio cable.
5. Install a jumper on pins 5-6 (rear R channel).
6. Install a jumper on pins 9-10 (rear L channel).
7. Replace the cover.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Connecting Hardware Control and Power Cables
Figure 10 shows the location of the chassis intrusion and fan headers, and power connectors.
Chassis
rear fan
1
12 V
Processor core
voltage connector
2
1
Processor
fan
1
Main power
connector
Chassis
front fan
Chassis intrusion
connector
2
1
1
1
OM17027
Figure 10. Location of Hardware Control Headers and Power Connectors
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting the Chassis Intrusion Cable
Connecting Fans
Connect the processor’s fan heat sink cable to the processor fan header on the board. Connect
Connecting Power Supply Cables
CAUTION
Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power
supply connector to the desktop board may result in damage to the desktop board and/or power
supply.
Figure 10 shows the location of power connectors.
2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector.
3. Connect the main power cable to the 2x10 connector.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Add-In Card and Peripheral Interface Connectors
Figure 11 shows the PCI bus add-in card and peripheral interface connectors for Desktop Board
D865GVHZ.
B
C
A
E
F
D
OM17028
Item Description
A
B
C
D
E
F
PCI bus add-in card connector 3
PCI bus add-in card connector 2 (SMBus routed)
PCI bus add-in card connector 1
Floppy drive
Primary IDE
Secondary IDE
Figure 11. PCI Bus Add-in Card and Peripheral Interface Connectors
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
1
3
OM17029
Figure 12. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 8 shows the jumper settings for the Setup program modes.
Table 8.
Jumper Settings for the BIOS Setup Program Modes
Mode Description
Jumper Setting
Normal (default) (1-2) The BIOS uses the current configuration and passwords for
booting.
1
1
1
3
3
3
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS displays
the Maintenance Menu. Use this menu to clear passwords.
Recovery (None)
The BIOS recovers data from a recovery diskette in the event
of a failed BIOS update.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Clearing BIOS Passwords
This procedure assumes that the board is installed in the computer and the BIOS configuration
jumper block is set to normal mode.
2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect
the computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
5. Place the jumper on pins 2-3 as shown below.
3
1
6. Replace the cover, plug in the computer, turn on the computer, and allow it to boot.
7. The computer starts the Setup program. Setup displays the Maintenance menu.
8. Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a pop-up
screen requesting that you confirm clearing the password. Select Yes and press <Enter>.
Setup displays the maintenance menu again.
9. Press <F10> to save the current values and exit Setup.
10. Turn off the computer. Disconnect the computer’s power cord from the AC power source.
11. Remove the computer cover.
12. To restore normal operation, place the jumper on pins 1-2 as shown below.
1
3
13. Replace the cover, plug in the computer, and turn on the computer.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Back Panel Connectors
NOTE
The line out connector, located on the back panel, is designed to power either headphones or
amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
Figure 13 shows the back panel connectors.
Line
In
USB 2.0
USB 2.0
OM17031
Figure 13. Back Panel Connectors
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Replacing the Battery
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer
is not plugged into a wall socket, the battery has an estimated life of three years. When the
computer is plugged in, the standby current from the power supply extends the life of the battery.
The clock is accurate to ±13 minutes/year at 25 ºC with 3.3 VSB applied.
When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS
RAM (for example, the date and time) might not be accurate. Replace the battery with an
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
where possible. Disposal of used batteries must be in accordance with local environmental
regulations.
PRÉCAUTION
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées
doivent être recyclées dans la mesure du possible. La mise au rebut des piles usagées doit
respecter les réglementations locales en vigueur en matière de protection de l'environnement.
FORHOLDSREGEL
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier bør om muligt
genbruges. Bortskaffelse af brugte batterier bør foregå i overensstemmelse med gældende
miljølovgivning.
OBS!
Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier bør kastes i
henhold til gjeldende miljølovgivning.
VIKTIGT!
Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de
lokala miljövårdsbestämmelserna.
VARO
Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista.
Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti.
VORSICHT
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch
denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden.
Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
AVVERTIMENTO
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo
pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate,
seguire le istruzioni del produttore.
PRECAUCIÓN
Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas
iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de
las pilas usadas, siga igualmente las instrucciones del fabricante.
WAARSCHUWING
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij.
Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het weggooien van gebruikte
batterijen aan de plaatselijke milieuwetgeving.
ATENÇÃO
Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto. As baterias
devem ser recicladas nos locais apropriados. A eliminação de baterias usadas deve ser feita de
acordo com as regulamentações ambientais da região.
AŚCIAROŽZNAŚĆ
����� ������ ������, ���� �������� ���������� ������������� ����. ����������� �������,
�� ����������, ���������������. ����������� �� ������ ������������ �������� ������ �
�������� �������������� �� ��������.
UPOZORNÌNÍ
V p�ípad� vým�ny baterie za nesprávný druh m�že dojít k výbuchu. Je-li to možné, baterie by m�ly
být recyklovány. Baterie je t�eba zlikvidovat v souladu s místními p�edpisy o životním prost�edí.
Προσοχή
������� �������� ��� ������ �� ��������� ��� � µ������� �������������� ��� µ�� ������µ����
�����. �� µ�������� �� ������ �� �������������� ���� ���� ������ ����� ������. � �������� ���
�����µ�����µ���� µ�������� ������ �� ������� ��µ���� µ� ���� ���� ���� ����������������
�������µ���.
VIGYÁZAT
Ha a telepet nem a megfelel� típusú telepre cseréli, az felrobbanhat. A telepeket lehet�ség szerint
újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi el�írásoknak megfelel�en kell
kiselejtezni.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
AWAS
Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya
dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar
tempatan.
OSTRZEŻENIE
Istnieje niebezpiecze�stwo wybuchu w przypadku zastosowania niew�a�ciwego typu baterii. Zu�yte
baterie nale�y w miar� mo�liwo�ci utylizowa� zgodnie z odpowiednimi przepisami ochrony
�rodowiska.
PRECAUŢIE
Risc de explozie, dac� bateria este înlocuit� cu un tip de baterie necorespunz�tor. Bateriile trebuie
reciclate, dac� este posibil. Depozitarea bateriilor uzate trebuie s� respecte reglement�rile locale
privind protec�ia mediului.
ВНИМАНИЕ
��� ������������� ������� ������������������ ���� ���������� ���� �� ������.
������� ������ ���� ������������� �� �����������. ���������� ������� ������
���������� �� ��������, ��������������� ������� �����������.
UPOZORNENIE
Ak batériu vymeníte za nesprávny typ, hrozí nebezpe�enstvo jej výbuchu.
Batérie by sa mali pod�a možnosti vždy recyklova�. Likvidácia použitých batérií sa musí vykonáva�
v súlade s miestnymi predpismi na ochranu životného prostredia.
POZOR
Zamenjava baterije z baterijo druga�nega tipa lahko povzro�i eksplozijo.
�e je mogo�e, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi
okoljevarstvenimi predpisi.
การระวงั
ระวังการระเบิดทเี่ กดิ จากเปลยี่ นแบตเตอรี่ผดิ ประเภท หากเปนไปได ควรนําแบตเตอรี่ไปรีไซเคิล
การทิ้งแบตเตอรี่ใชแลวตอ งเปนไปตามกฎขอ บังคบั ดานสิ่งแวดลอมของทองถิ่น.
UYARI
Yanlı� türde pil takıldı�ında patlama riski vardır. Piller mümkün oldu�unda geri
dönü�türülmelidir. Kullanılmı� piller, yerel çevre yasalarına uygun olarak atılmalıdır.
OСТОРОГА
�������������� ������� ����������� ����, ������ ���������� ����� ������.
���� �������, ����������� ������� ���� �����������. ���������� ������������ �������
��� ���� �������� ������ �������� ����, �� ��������� ������� ��������.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
To replace the battery, follow these steps:
2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power
cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the
orientation of the “+” and “-” on the battery.
6. Install the new battery in the connector, orienting the “+” and “-” correctly.
7. Replace the computer cover.
OM17030
Figure 14. Removing the Battery
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Updating the BIOS
This chapter tells you how to update the BIOS by either using the Intel® Express BIOS Update
utility or the Iflash Memory Update utility, and how to recover the BIOS if an update fails.
Updating the BIOS with the Intel® Express BIOS
Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in the Windows
environment. The BIOS file is included in an automated update utility that combines the
functionality of the Intel® Flash Memory Update Utility and the ease-of use of Windows-based
installation wizards.
To update the BIOS with the Intel Express BIOS Update utility:
1. Go to the Intel World Wide Web site:
2. Navigate to the Desktop Board D865GVHZ page and click the Express BIOS Update utility
file for the Desktop Board D865GVHZ BIOS.
3. Download the file to your hard drive. (You can also save this file to a diskette. This is useful if
you are updating the BIOS for multiple identical systems.)
4. Close all other applications. This step is required. Your system will be rebooted at the last
Express BIOS Update window.
5. Double-click the executable file from the location on your hard drive where it was saved. This
runs the update program.
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Updating the BIOS with the Iflash Memory Update
Utility
With the Iflash Memory Update utility you can update the system BIOS from a floppy disk or other
bootable media. The utility available from the Web provides a simple method for creating a
bootable flash memory update floppy that will automatically update your BIOS.
Obtaining the BIOS Update File
You can update to a new version of the BIOS by using the BIOS update file. The BIOS update file
is a compressed self-extracting archive that contains all the files you need to update the BIOS. The
BIOS update file contains:
•
•
•
New BIOS files
BIOS recovery files
Iflash Memory Update utility
You can obtain the BIOS update file through your computer supplier or by navigating to the
Desktop Board D865GVHZ page on the Intel World Wide Web site:
NOTE
Review the instructions distributed with the update utility before attempting a BIOS update.
The Intel Flash Memory Update Utility allows you to:
•
•
Update the BIOS in flash memory
Update the language section of the BIOS
Updating the BIOS
CAUTION
The AUTOEXEC.BAT file provided with the update files updates the BIOS. Do not interrupt the
process or the system may not function.
1. Boot the computer with the BIOS update diskette in drive A. During system boot, the
AUTOEXEC.BAT file provided with the update files will automatically run the BIOS update
process.
2. When the update process is complete, the monitor will display a message telling you to remove
the diskette and to reboot the system.
3. As the computer boots, check the BIOS identifier (version number) to make sure the update
was successful. If a logo appears, press <Esc> to view the POST messages.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating the BIOS
Recovering the BIOS
It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the
BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails.
information on Setup modes.
NOTE
Because of the small amount of code available in the boot block area, there is no video support.
You will not see anything on the screen during this procedure. Monitor the procedure by listening
to the speaker and looking at the diskette drive LED.
1. Turn off the computer, disconnect the computer’s power cord, and disconnect all external
peripherals.
3. Remove the jumper from all pins as shown below to set recovery mode for Setup.
1
3
4. Insert the bootable BIOS update diskette into diskette drive A.
5. Replace the computer cover, connect the power cord, turn on the computer, and allow it to
boot. The recovery process will take a few minutes.
6. Listen to the speaker:
•
Upon applying power, drive A will begin to show activity. In about a minute, two beeps
are heard and drive A activity ceases (temporarily) indicating the successful recovery of the
BIOS core. Drive A activity will begin again followed by two more beeps indicating the
successful recovery of the boot block. This sequence of events indicates a successful BIOS
recovery.
•
A series of continuous beeps indicates a failed BIOS recovery.
7. If recovery fails, return to step 1 and repeat the recovery process.
8. If recovery is successful, turn off the computer, and disconnect its power cord.
9. Remove the computer cover and continue with the following steps.
10. On the jumper block, reinstall the jumper back on pins 1-2 as shown below to set normal mode
for Setup.
1
3
11. Leave the update diskette in drive A, replace the computer cover, and connect the computer’s
power cord.
12. Turn on the computer and continue with the BIOS update.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Using the BIOS Setup Program
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel® Desktop Board D865GVHZ Technical Product Specification or
the Intel World Wide Web site:
NOTE
For reference purposes, you should write down the current Setup settings. When you make changes
to the settings, update this record.
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
BF865.10A.86A. Boards with other BIOS identifiers might have differences in some of the
Setup menu screens.
Table 9 shows the BIOS Setup program menu bar.
Table 9.
BIOS Setup Program Menu Bar
Maintenance
Main
Advanced
Security
Power
Boot
Exit
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures extended
configuration
Allocates
Configures
Sets passwords Configures
Selects boot
options and
Saves or
discards
resources for advanced
hardware features
components available
through the
and security
features
power
management power supply changes to set
features controls program options
chipset
memory settings
* For information about the BIS, refer to the Intel Web site at:
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Table 10 shows the function keys available for menu screens.
Table 10. BIOS Setup Program Function Keys
BIOS Setup Program Function Key
Description
<←> or <→>
<↑> or <↓>
<Tab>
Selects a different menu screen
Moves cursor up or down
Moves cursor to the next field
<Enter>
<F9>
Executes command or selects the submenu
Load the default configuration values for the current menu
Save the current values and exits the BIOS Setup program
Exits the menu
<F10>
<Esc>
Maintenance Menu
Maintenance Main
Advanced
Security
Power Boot
Exit
Clear All Passwords
CPU Frequency Multiplier
[13 To 1 Ratio]
CPU Stepping Signature
CPU Microcode Update Rev.
Ratio Actual Value:
[F29]
[<none loaded>]
[13]
← →
↑ ↓
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select→ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
Table 11. Maintenance Menu
Feature
Options
Description
Clear All Passwords
• Ok
Clears both the user and supervisor BIOS passwords.
• Cancel
Clear Trusted Platform Module
• Ok
Clears Ownership and all keys from the TPM.
• Cancel
No options
CPU Frequency
Displays CPU frequency.
CPU Stepping Signature
No options Displays processor’s Stepping Signature.
CPU Microcode Update Revision No options Displays processor’s Microcode Update Revision.
Ratio Actual Value
No options Displays ratio value.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Main Menu
Main Advanced
Security
Power
Boot
Exit
BIOS Version
xxxxx10A.86A.xxxx.xxx
Intel® Pentium® 4
Processor Type
Hyper-Threading Technology [Enabled]
Processor Speed
System Bus Speed
System Memory Speed
X.XX GHz
XXX MHz
XXX MHz
Cache RAM
XXX KB
Total Memory
Memory Mode
XXX MB
Dual Channel
Memory Channel A Slot 0 XXX MB (DDRYYY)
Memory Channel A Slot 1 Not Installed
Memory Channel B Slot 0 XXX MB (DDRYYY)
Memory Channel B Slot 1 Not Installed
← →
↑ ↓
Enter
F1
P9
Select Screen
Select Item
Select ꢀ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
Language
System Time
[English]
F10
ESC
[xx.xx.xx]
used to configure the system date and system time.
Table 12. Main Menu
Feature
Options
Description
BIOS Version
Processor Type
No options
Displays the version of the BIOS.
Displays processor type.
No options
• Enabled (default)
• Disabled
Hyper-Threading
Technology
Enables or disables Hyper-Threading Technology.
Processor Speed
System Bus Speed
System Memory Speed
Cache RAM
No options
No options
No options
No options
Displays processor speed.
Displays the system bus speed.
Displays the current system memory speed.
Displays the size of second-level cache and whether it
is ECC-capable.
Total Memory
Memory Mode
No options
No options
Displays the total amount of RAM.
Displays the amount and type (as defined by SPD) of
the RAM in the memory banks.
Language
• English (default)
• Français
Selects the current default language used by the
BIOS.
System Time
Hour, minute, and
second
Specifies the current time.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Advanced Menu
Main
Advanced Security Power Boot Exit
Setup Warning:
Setting items on this screen to incorrect values
may cause your system to malfunction!
ꢁ PCI Configuration
ꢁ Boot Configuration
ꢁ Peripheral Configuration
ꢁ IDE Configuration
ꢁ Diskette Configuration
ꢁ Event Log Configuration
ꢁ Video Configuration
ꢁ USB Configuration
ꢁ Chipset Configuration
ꢁ Fan Control Configuration
← →
↑ ↓
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ꢁ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
available through the chipset.
Table 13. Advanced Menu
Feature
Options
Description
PCI Configuration
No options
Configures individual PCI slot’s IRQ priority. When selected,
displays the PCI Configuration submenu.
Boot Configuration
No options
No options
Configures Plug & Play and the Numlock key, and resets
configuration data. When selected, displays the Boot
Configuration submenu.
Peripheral Configuration
Configures peripheral ports and devices. When selected,
displays the Peripheral Configuration submenu.
IDE Configuration
No options
No options
Specifies type of connected IDE device.
Diskette Configuration
Configures the floppy drive(s). When selected, displays the
Diskette Configuration submenu.
Event Log Configuration
Video Configuration
USB Configuration
No options
No options
No options
No options
Configures event logging. When selected, displays the Event
Log Configuration submenu.
Configures video features. When selected, displays the
Video Configuration submenu.
Configures USB features. When selected, displays the USB
Configuration submenu.
Chipset Configuration
Configures chipset features. When selected, displays the
Chipset Configuration submenu.
Fan Control Configuration No options
Configures fan control features. When selected, displays the
Fan Control Configuration submenu.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
PCI Configuration Submenu
Main Advanced Security Power Boot Exit
PCI Configuration
PCI Slot 1 IRQ Priority
PCI Slot 2 IRQ Priority
PCI Slot 3 IRQ Priority
[Auto]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 14. PCI Configuration Submenu
Feature
Options
Description
PCI Slot 1 IRQ Priority
PCI Slot 2 IRQ Priority
PCI Slot 3 IRQ Priority
• Auto (default)
• 3
• 5
Allows selection of IRQ priority.
• 9
• 10
• 11
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Boot Configuration Submenu
Main Advanced Security Power Boot Exit
Boot Configuration
Plug & Play O/S
Numlock
[No]
[On]
ASF Support
[Enabled]
← →
↑ ↓
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ꢁ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
the Numlock key.
Table 15. Boot Configuration Submenu
Feature
Options
Description
Plug & Play O/S
• No (default)
• Yes
Specifies if manual configuration is desired.
No lets the BIOS configure all devices in the system. This
setting is appropriate when using a Plug and Play
operating system.
Yes lets the operating system configure Plug & Play (PnP)
devices not required for boot if your system has a Plug &
Play operating system. This option is available for use
during lab testing.
Numlock
• Off
• On (default)
• Disabled
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.
ASF Support
Configures LAN ASF (Alert Standard Format) feature.
• Enabled (default)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Peripheral Configuration Submenu
Main Advanced Security Power
Boot Exit
Peripheral Configuration
Serial Port A
Parallel Port
Mode
[Auto]
[Auto]
[Bi-directional]
Audio
Onboard LAN
ASF Support
[Enabled]
[Enabled]
[Enabled]
← →
↑ ↓
Select Screen
Select Item
Enter
F1
P9
F10
ESC
Select ꢁ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
Table 16. Peripheral Configuration Submenu
Feature
Options
Description
Serial Port A
• Disabled
Configures serial port A.
• Enabled
• Auto (default)
Auto assigns the first free COM port, normally COM1,
the address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates
a conflict with another device.
Base I/O Address
• 3F8 (default)
• 2F8
• 3E8
Specifies the base I/O address for serial port A, if
serial port A is Enabled.
(This feature is present
only when Serial Port A
is set to Enabled)
• 2E8
Interrupt
• IRQ 3
• IRQ 4 (default)
Specifies the interrupt for serial port A, if serial port A
is Enabled.
(This feature is present
only when Serial Port A
is set to Enabled)
Parallel Port
• Disabled
Configures the parallel port.
Auto assigns LPT1 the address 378h and the
interrupt IRQ7.
An * (asterisk) displayed next to an address indicates
a conflict with another device.
• Enabled
• Auto (default)
continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Table 16. Peripheral Configuration Submenu (continued)
Feature
Options
Description
Mode
• Output only
• Bi-directional (default)
• EPP
Selects the mode for the parallel port. Not available
if the parallel port is disabled.
Output Only operates in AT*-compatible mode.
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-
speed bi-directional mode.
Base I/O Address
• 378 (default)
• 278
Specifies the base I/O address for the parallel port,
if Parallel Port is Enabled.
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
• IRQ 5
• IRQ 7 (default)
Specifies the interrupt for the parallel port, if Parallel
Port is Enabled.
(This feature is present
only when Parallel Port
is set to Enabled)
Audio
• Disabled
• Enabled (default)
• Disabled
Enables or disables onboard audio.
Enables or disables the LAN device.
Onboard LAN
(This feature is present
only when there is
onboard LAN)
• Enabled (default)
ASF Support
• Disabled
Enables or disables Alert Standard Format.
• Enabled (default)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
ATA/IDE Configuration Submenu
Main Advanced Security Power
IDE Configuration
Boot Exit
ATA/IDE Configuration
Legacy IDE Channels
PCI IDE Bus Master
Hard Disk Pre-Delay
[Legacy]
[PATA Pri and Sec]
[Enabled]
[Disabled]
ꢁ [PATA Primary Master : xxxxxxx]
ꢁ [PATA Primary Slave
: Not Detected]
ꢁ [PATA Secondary Master : xxxxxxx]
ꢁ [PATA Secondary Master : Xxxxxxx]
← →
↑ ↓
Select Screen
Select Item
Enter
F1
P9
F10
ESC
Select ꢁ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
Table 17. ATA/IDE Configuration Submenu
Feature
Options
Description
ATA/IDE Configuration • Disabled
• Legacy
Specifies the integrated IDE controller.
Disabled disables the integrated IDE controller.
Legacy enables up to two IDE channels for OS
requiring legacy IDE operation.
• Enhanced (default)
Enhanced all SATA and PATA resources.
Legacy IDE Channels • PATA Pri only
• PATA Sec only
Configures PATA and SATA resources for OS
requiring legacy IDE operation.
• PATA Pri and Sec (default)
• SATA P0/P1 only
• SATA P0/P1, PATA Sec
• SATA P0/P1, PATA Pri
PCI IDE Bus Master
Hard Disk Pre-Delay
• Disabled
• Enabled (default)
• Disabled (default)
• 3 Seconds
• 6 Seconds
Allows a PCI device to initiate a transaction as
a master.
Specifies the hard disk drive pre-delay. Causes
the BIOS to insert a delay before attempting to
detect IDE drives in the system.
• 9 Seconds
• 12 Seconds
• 15 Seconds
• 21 Seconds
• 30 Seconds
NOTE: SATA hard drives are not supported on desktop board D865GVHZ.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
PATA Submenu
Main Advanced Security Power Boot Exit
ꢁ [PATA Port-0
: Xxxxxxxx
]
Type
Maximum Capacity
[Auto]
[Auto]
Configuration Options
Selected by BIOS
LBA Mode :
Block Mode:
PIO Mode :
Ultra DMA :
Cable Detected :
[Supported]
16 sectors
Mode 4
Mode 6
Serial
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
Table 18. PATA Submenus
Feature
Options
Description
Drive Installed
Type
None
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
Specifies LBA mode control.
• Auto (default)
• User
Maximum Capacity None
LBA Mode Control None
(Note)
Block Mode
• Disabled
• Auto (default)
Check the hard disk drive’s specifications for optimum
setting.
PIO Mode
(Note)
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
NOTE: SATA hard drives are not supported on desktop board D865GVHZ.
continued
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Feature
Options
Description
DMA Mode
• Auto (default)
• SWDMA 0
• SWDMA 1
• SWDMA 2
• MWDMA 0
• MWDMA 1
• MWDMA 2
• UDMA 0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
• Auto (default)
• Disable
Specifies the Ultra DMA mode for the drive.
S.M.A.R.T.
Self-monitoring analysis and reporting technology.
• Enable
Cable Detected
(Note)
None
Displays the type of cable connected to the IDE interface:
40-conductor or 80-conductor (for ATA-66/100 devices) or
Serial ATA.
Note: These configuration options appear only if an IDE device is installed.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Diskette Configuration Submenu
Main
Advanced
Security
Power
Boot
Exit
Diskette Configuration
Diskette Controller
Floppy A
[Enabled]
[1.44/1.25MB 3½"]
[Disabled]
Diskette Write Protect
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 19. Diskette Configuration Submenu
Feature
Options
Description
Diskette Controller
• Disabled
Configures the integrated floppy controller.
• Enabled (default)
• Disabled
Floppy A
Selects the floppy drive type.
• 360 KB 5¼”
• 1.2 MB 5¼”
• 720 KB 3½”
• 1.44 MB 3½” (default)
• 2.88 MB 3½”
• Disabled (default)
• Enabled
Diskette Write Protect
Disables or enables diskette drive write protection.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Event Log Configuration Submenu
Main
Advanced
Security
Power
Boot
Exit
Event Log Configuration
Event Log
[Space Available]
View Event Log
Clear Event Log
Event Logging
ECC Event Logging
[Enabled]
[Enabled]
Mark Events As Read
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 20. Event Log Configuration Submenu
Feature
Options
Description
Event Log
No options
Indicates if there is space available in the event log.
Displays the contents of the DMI event log.
Discards all events in the event log.
Enables or disables event logging.
View Event Log
Clear Event Log
Event Logging
[Enter]
No options
• Disabled
• Enabled (default)
• Disabled
• Enabled (default)
[Enter]
ECC Event Logging
Enabled allows logging of DMI events.
Mark Events As Read
Marks all DMI events in the event log as read.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Video Configuration Submenu
Main
Advanced
Security
Power
Boot
Exit
Video Configuration
AGP Aperture Size
Primary Video Adapter
Frame Buffer Size
[ 64MB]
[AGP]
[1MB]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 21. Video Configuration Submenu
Feature
Options
Description
AGP Aperture Size
• 4 MB
• 8 MB
Amount of system memory available for direct access by
the graphics device.
• 16 MB
• 32 MB
• 64 MB (default)
• 128 MB
• 256 MB
• AGP (default)
• PCI
Primary Video Adapter
Frame Buffer Size
Allows selecting an AGP or PCI video controller as the
display device that will be active when the system boots.
• 512 KB
• 1 MB (default)
• 8 MB
Controls how much system RAM is reserved for use by
the internal graphics device.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
USB Configuration Submenu
Main
Advanced
Security
Power
Boot
Exit
USB Configuration
High-Speed USB
[Enabled]
Legacy USB Support
[Enabled]
USB 2.0 Legacy Support
[FullSpeed]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 22. USB Configuration Submenu
Feature
Options
Description
High Speed USB
• Disabled
• Enabled (default)
• Disabled
Disable this option when a USB 2.0 driver is not
available.
Legacy USB Support
Enables support for legacy USB.
• Enabled (default)
USB 2.0 Legacy Support
•
•
Full Speed (default) Configures Legacy USB transfer rate:
Hi Speed
Full Speed: 12 Mbps
Hi Speed: 480 Mbps
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Chipset Configuration Submenu
Main
Advanced
Security
Power
Boot
Exit
Chipset Configuration
Setup Warning:
Setting items on this screen to incorrect values
may cause your system to malfunction!
ISA Enable Bit
PCI Latency Timer
CSA Device
[Enabled]
[32]
[Auto]
Do you wish to continue?
Burn-In Mode
[Continue]
[Default]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Extended Configuration
Chipset Memory Timing Control
Graphics Core Frequency
SDRAM Frequency
[Default]
[Auto]
[Auto]
Table 23. Chipset Configuration Submenu
Feature
Options
Description
ISA Enable Bit
• Enabled (default)
• Disabled
• 32 (default)
• 64
Some older expansion devices require this option
to be enabled.
PCI Latency Timer
Set PCI latency time.
• 96
• 128
• 160
• 192
• 224
• 248
CSA Device
• Auto (default)
• Disable
Do you wish to continue? • No (default)
• Continue
Burn-In Mode
• Default (default)
• -2.0%
Alters host and I/O clock frequencies.
• -1.0%
• +1.0%
• +2.0%
• +3.0%
• +4.0%
continued
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Table 23. Chipset Configuration Submenu (continued)
Feature
Options
Description
Extended Configuration
• Default (default)
• User Defined
Chooses the default or user defined settings for
the extended configuration options.
Graphics Core Frequency • Auto (default)
• 266 MHz
Allows override of detected graphics core
frequency value.
• 333-320 MHz
SDRAM Frequency
• Auto (default)
• 266 MHz
Allows override of detected memory frequency
value.
• 333 MHz
• 400 MHz
SDRAM Timing Control
• Auto (default)
• Manual – Aggressive
• Manual – User Defined
Auto allows timings to be programmed according
to the memory detected.
Manual – Aggressive selects the most aggressive
user defined timings.
Manual – User Defined allows manual override of
detected SDRAM settings.
CPC Override
• Auto (default)
• Enabled
• Disabled
Controls Command Per Clock/1n rule mode.
When enabled, allows DRAM controller to attempt
Chip Select assertions in two consecutive
common clocks.
SDRAM RAS Act. To Pre. • 8 (default)
Selects length of time from read to pre-change.
Corresponds to tRAS, min.
• 7
• 6
• 5
SDRAM CAS# Latency
• 2.0
• 2.5
• 3.0 (default)
• 4
• 3 (default)
• 2
Selects the number of clock cycles required to
address a column in memory. Corresponds
to CL.
SDRAM RAS# to CAS#
delay
Selects the number of clock cycles between
addressing a row and addressing a column.
Corresponds to tRCD.
SDRAM RAS# Precharge • 4
• 3 (default)
• 2
Selects the length of time required before
accessing a new row.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Fan Control Submenu
Main
Advanced
Security
Power
Boot
Exit
Fan Control Configuration
Setup Warning:
These options will not take effect until power has
been completely removed from the system. After
saving the BIOS settings and turning the system
off, unplug the power cord from the system and wait
for at least 30 seconds before reapplying power and
turning the system back on.
Fan Control
Lowest Fan Speed
[Enabled]
[Slow]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 24. Hardware Management
Feature
Options
Description
Fan Control
• Disabled
Disables or enables system fan control.
• Enabled (default)
• Slow (default)
• Off
Lowest Fan Speed
This option defines the fan speed at the lowest system
temperature.
Slow allows the fans to continue to run at a reduced speed
at low system temperatures.
Off turns off the fans at low system temperatures.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Security Menu
Main Advanced Security Power Boot Exit
Supervisor Password :
User Password
Not Installed
Not Installed
:
Set Supervisor Password
Set User Password
Chassis Intrusion
[Disabled]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 25. Security Menu
If no password entered previously:
Feature
Options
Description
Supervisor Password
User Password
No options
No options
Reports if there is a supervisor password set.
Reports if there is a user password set.
Set Supervisor Password
Password can be up to seven Specifies the supervisor password.
alphanumeric characters.
Set User Password
Password can be up to seven Specifies the user password.
alphanumeric characters.
Clear User Password
(Note 1)
• Yes (default)
• No
Clears the user password.
User access Level
(Note 2)
• Limited
Sets BIOS Setup Utility access rights for
user level.
• No access
• View Only
• Full (default)
• Disabled (default)
• Enabled
Chassis Intrusion
Notes:
Enables or disables the chassis intrusion
feature.
1. This feature appears only if a user password has been set.
2. This feature appears only if both a user password and a supervisor password have been set.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Power Menu
Main
Advanced
Security
Power
Boot
Exit
ꢁ ACPI
After Power Failure
[Last State]
The options below are not related to ACPI and may
be ignored when shutting down using an ACPI OS.
Wake on PCI PME
[Stay Off]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 26. Power Menu
Feature
Options
Description
ACPI
No Options
When selected, displays the ACPI submenu.
After Power Failure
• Stay Off
• Last State (default)
• Power On
Determines the mode of operation if a power loss
occurs.
Stay Off keeps the power off until the power button is
pressed.
Last State restores the previous power state before
power loss occurred.
Power On restores power to the computer.
Wake on PCI PME
• Stay Off (default)
• Power-On
Determines how the system responds to a PCI-PME
wake up event.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
ACPI Submenu
Main Advanced Security Power Boot Exit
Advanced Configuration and Power Interface
S1 is the safest mode but
consumes more power. S3
consumes low power but
drivers may not support
this state.
ACPI Suspend State
Wake on LAN from S5
[S1 State]
[Stay Off]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 27. ACPI Submenu
Feature
Options
Description
ACPI Suspend Mode
• S1 State (default)
• S3 State
Specifies the ACPI sleep state.
Wake on LAN* from S5 • Stay Off (default)
• Power On
In ACPI soft-off mode only, determines how the
system responds to a LAN wake up event when the
system is in the ACPI soft-off mode.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Boot Menu
Main Advanced Security Power Boot Exit
Silent BOOT
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
Intel ® Rapid BIOS Boot
Scan User Flash Area
PXE Boot to LAN
USB Boot
ꢁ Boot Device Priority
ꢁ Hard Disk Drives
ꢁ Removable Devices
ꢁ ATAPI CD-ROM Drives
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 28. Boot Menu
Feature
Options
Description
Silent Boot
• Disabled
Disabled displays normal POST messages.
• Enabled (default) Enabled displays OEM logo instead of POST messages.
Intel® Rapid BIOS Boot
Scan User Flash Area
PXE Boot to LAN
USB Boot
• Disabled
• Enabled (default)
• Disabled
Allows BIOS to skip certain tests while booting.
Enables the BIOS to scan the flash ROM for user binary
files that are executed at boot time.
• Enabled (default)
• Disabled (default) Disables or enables PXE boot to LAN.
• Enabled
• Disabled
Disables or enables booting to USB boot devices.
• Enabled (default)
No options
Boot Device Priority
Hard Disk Drives
Specifies the boot sequence from the available types of
boot devices.
No options
No options
Specifies the boot sequence from the available hard
disk drives.
Removable Devices
Specifies the boot sequence from the available removable
devices.
ATAPI CD-ROM Drives No options
Specifies the boot sequence from the available ATAPI
CD-ROM drives.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Boot Device Priority Submenu
Main Advanced Security Power Boot
Exit
Specifies the boot
sequence from the
available devices.
1st Boot Device
2nd Boot Device
3rd Boot Device
[1st FLOPPY DRIVE]
[xxxxxxxxxxx]
[xxxxxxxxxxx]
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 29. Boot Device Priority Submenu
Options
Description
Feature
1st Boot Device • Removable Device Specifies the boot sequence from the available devices. To
2nd Boot Device
3rd Boot Device
specify boot sequence:
• Hard Drive
• ATAPI CD-ROM
• Disabled
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended boot
device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
• Removable Device (maximum of four).
• Hard Drive (maximum of 12).
• ATAPI CD-ROM (maximum of four).
• A device enclosed in parenthesis has been disabled in the
corresponding type menu.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Hard Disk Drives Submenu
Main
Advanced Security Power Boot Exit
Specifies the boot
sequence from the
available devices. Select
the boot device with
UpArrow or DownArrow key.
Press Enter to set the
selections as the intended
boot device. ARMD = ATAPI
Removable Media Device.
1st Drive
2nd Drive
3rd Drive
4th Drive
[xxxxxxxxxxxxx]
[xxxxxxxxxxxxx]
[xxxxxxxxxxxxx]
[xxxxxxxxxxxxx]
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 30. Hard Disk Drives Submenu
Feature
Options
Description
1st Hard Disk Drive
Dependent on installed Specifies the boot sequence from the available hard disk
(Note)
hard drives
drives. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to
12 hard disk drives, the maximum number of hard disk drives supported by the BIOS.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Removable Devices Submenu
Main Advanced Security Power Boot Exit
1st Drive [1st FLOPPY DRIVE]
Specifies the boot
sequence from the
available devices. Select
the boot device with
UpArrow or DownArrow key.
Press Enter to set the
selections as the intended
boot device. ARMD = ATAPI
Removable Media Device.
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
Table 31. Removable Devices Submenu
Feature
Options
Description
1st Removable Device
(Note)
Dependent on installed
removable devices
Specifies the boot sequence from the available
removable devices. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the
intended boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to four removable devices, the maximum number of removable devices supported by the BIOS.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
ATAPI CD-ROM Drives
Main Advanced Security Power Boot Exit
Specifies the boot
sequence from the
available devices.
Select the boot device
with UpArrow or
1st Drive
2nd Drive
[xxxxxxx]
[xxxxxxx]
DownArrow key. Press
Enter to set the
selections as the
intended boot device.
ARMD = ATAPI Removable
Media Device.
← →
↑ ↓
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ꢁ Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
Table 32. ATAPI CD-ROM Drives Submenu
Feature
1st ATAPI CD-ROM Drive Dependent on installed
ATAPI CD-ROM drives
Options
Description
Specifies the boot sequence from the available
ATAPI CD-ROM drives. To specify boot sequence:
(Note)
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the
intended boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display
up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the BIOS Setup Program
Exit Menu
Main Advanced Security Power Boot Exit
Exit Saving Changes
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
← →
↑ ↓
Select Screen
Select Item
Enter Select ꢁ Sub-Menu
F1
P9
F10
ESC
General Help
Setup Defaults
Save and Exit
Exit
and saving defaults.
Table 33. Exit Menu
Feature
Description
Exit Saving Changes
Exits and saves the changes in CMOS SRAM.
Exit Discarding Changes Exits without saving any changes made in the BIOS Setup program.
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Loads optimal defaults.
Loads the custom defaults for Setup options.
Saves the current values as custom defaults. Normally, the BIOS reads the
Setup values from flash memory. If this memory is corrupted, the BIOS reads the
custom defaults. If no custom defaults are set, the BIOS reads the factory
defaults.
Discard Changes
Discards changes without exiting Setup. The option values present when the
computer was turned on are used.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
78
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Desktop Board Resources
Memory Map
Table 34. System Memory Map
Address Range (decimal) Address Range (hex) Size
Description
1024 K - 2097152 K
960 K - 1024 K
896 K - 960 K
100000 - 7FFFFFF
F0000 - FFFFF
E0000 - EFFFF
C8000 - DFFFF
2047 MB Extended Memory
64 KB
64 KB
96 KB
Runtime BIOS
Reserved
800 K - 896 K
Available high DOS memory (open to the
PCI bus)
640 K - 800 K
639 K - 640 K
A0000 - C7FFF
9FC00 - 9FFFF
160 KB
1 KB
Video memory and BIOS
Extended BIOS data (movable by
memory manager software)
512 K - 639 K
0 K - 512 K
80000 - 9FBFF
00000 - 7FFFF
127 KB
512 KB
Extended conventional memory
Conventional memory
DMA Channels
Table 35. DMA Channels
DMA Channel Number
Data Width
System Resource
0
1
2
3
4
5
6
7
8 or 16 bits
8 or 16 bits
8 or 16 bits
8 or 16 bits
8 or 16 bits
16 bits
Parallel port
Floppy drive
Parallel port (for ECP or EPP)
DMA controller
Open
16 bits
Open
16 bits
Open
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Interrupts
Table 36. Interrupts
IRQ
NMI
0
System Resource
I/O channel check
Reserved, interval timer
1
Reserved, keyboard buffer full
2
Reserved, cascade interrupt from slave PIC
3
COM2*
4
COM1*
5
LPT2 (Plug and Play option) **
6
Floppy drive controller
7
LPT1*
8
Real time clock
9
**
10
11
12
13
14
15
**
**
Onboard mouse port (if present, else user available)
Reserved, math coprocessor
Primary IDE/Serial ATA (if present, else user available)
Secondary IDE/Serial ATA (if present, else user available)
* Default, but can be changed to another IRQ.
** Dynamically allocated for all PCI/AGP devices and slots.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
A Error Messages and Indicators
Desktop Board D865GVHZ reports POST errors in two ways:
•
•
By sounding a beep code
By displaying an error message on the monitor
BIOS Beep Codes
followed by two short tones) during POST if the video configuration fails (a faulty video card or no
card installed) or if an external ROM module does not properly checksum to zero.
Table 37. Beep Codes
Number of Beeps
Description
1
Refresh failure
2
Parity cannot be reset
3
First 64 K memory failure
4
Timer not operational
5
Processor failure (Reserved; not used)
8042 GateA20 cannot be toggled (memory failure or not present)
Exception interrupt error
6
7
8
Display memory R/W error
9
(Reserved; not used)
10
11
CMOS Shutdown register test error
Invalid BIOS (such as, POST module not found)
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
BIOS Error Messages
When a recoverable error occurs during the POST, the BIOS displays an error message describing
the problem.
Table 38. BIOS Error Messages
Error Message
Explanation
GA20 Error
An error occurred with Gate-A20 when switching to protected
mode during the memory test.
Pri Master HDD Error
Pri Slave HDD Error
Sec Master HDD Error
Sec Slave HDD Error
Could not read sector from corresponding drive.
Pri Master Drive - ATAPI Incompatible
Pri Slave Drive - ATAPI Incompatible
Sec Master Drive - ATAPI Incompatible
Sec Slave Drive - ATAPI Incompatible
Corresponding drive is not an ATAPI device. Run Setup to make
sure device is selected correctly.
A: Drive Error
B: Drive Error
No response from the diskette drive.
CMOS Battery Low
The battery may be losing power. Replace the battery soon.
CMOS Display Type Wrong
The display type is different than what has been stored in CMOS.
Check Setup to make sure type is correct.
CMOS Checksum Bad
CMOS Settings Wrong
CMOS Date/Time Not Set
The CMOS checksum is incorrect. CMOS memory may have been
corrupted. Run Setup to reset values.
CMOS values are not the same as the last boot. These values
have either been corrupted or the battery has failed.
The time and/or date values stored in CMOS are invalid. Run
Setup to set correct values.
DMA Error
Error during read/write test of DMA controller.
Error occurred trying to access diskette drive controller.
Error occurred trying to access hard disk controller.
NVRAM is being checked to see if it is valid.
NVRAM was invalid and has been updated.
FDC Failure
HDC Failure
Checking NVRAM.....
Update OK!
Updated Failed
Keyboard Is Locked
NVRAM was invalid but was unable to be updated.
The system keyboard lock is engaged. The system must be
unlocked to continue to boot.
Keyboard Error
Error in the keyboard connection. Make sure keyboard is
connected properly.
KB/Interface Error
Keyboard interface test failed.
continued
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages and Indicators
Table 38. BIOS Error Messages (continued)
Error Message
Explanation
Memory Size Decreased
Memory size has decreased since the last boot. If no memory was
removed, then memory may be bad.
Memory Size Increased
Memory Size Changed
Memory size has increased since the last boot. If no memory was
added, there may be a problem with the system.
Memory size has changed since the last boot. If no memory was
added or removed, then memory may be bad.
No Boot Device Available
Off Board Parity Error
System did not find a device to boot.
A parity error occurred on an offboard card. This error is followed
by an address.
On Board Parity Error
Parity Error
A parity error occurred in onboard memory. This error is followed
by an address.
A parity error occurred in onboard memory at an unknown
address.
NVRAM / CMOS / PASSWORD
cleared by Jumper
NVRAM, CMOS, and passwords have been cleared. The system
should be powered down and the jumper removed.
<CTRL_N> Pressed
CMOS is ignored and NVRAM is cleared. User must enter Setup.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
84
Download from Www.Somanuals.com. All Manuals Search And Download.
B Regulatory Compliance
This appendix contains the following regulatory compliance information for Desktop Board
D865GVHZ:
•
•
•
•
•
Safety regulations
European Union Declaration of Conformity statement
Product Ecology statements
Electromagnetic Compatibility (EMC) regulations
Product certification markings
Safety Regulations
installed in a compatible host system.
Table 39. Safety Regulations
Regulation
Title
UL 60950-1:2003/
CSA C22.2 No. 60950-1-03
EN 60950-1:2002
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
IEC 60950-1:2001, First Edition
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
European Union Declaration of Conformity Statement
We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board
D865GVHZ is in conformity with all applicable essential requirements necessary for CE marking,
following the provisions of the European Council Directive 89/336/EEC (EMC Directive) and
Council Directive 73/23/EEC (Safety/Low Voltage Directive).
The product is properly CE marked demonstrating this conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives 89/336/EEC and 73/23/EEC.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Dansk Dette produkt er i overensstemmelse med det europæiske direktiv 89/336/EEC &
73/23/EEC.
Dutch Dit product is in navolging van de bepalingen van Europees Directief 89/336/EEC &
73/23/EEC.
Suomi Tämä tuote noudattaa EU-direktiivin 89/336/EEC & 73/23/EEC määräyksiä.
Français Ce produit est conforme aux exigences de la Directive Européenne 89/336/EEC &
73/23/EEC.
Deutsch Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 89/336/EEC &
73/23/EEC.
Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 89/336/ EEC &
73/23/EEC.
Italiano Questo prodotto è conforme alla Direttiva Europea 89/336/EEC & 73/23/EEC.
Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 89/336/ EEC &
73/23/EEC.
Portuguese Este produto cumpre com as normas da Diretiva Européia 89/336/EEC &
73/23/EEC.
Español Este producto cumple con las normas del Directivo Europeo 89/336/EEC & 73/23/EEC.
Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 89/336/EEC & 73/23/EEC.
Product Ecology Statements
The following information is provided to address worldwide product ecology concerns and
regulations.
Disposal Considerations
This product contains the following materials that may be regulated upon disposal: lead solder on
the printed wiring board assembly.
Recycling Considerations
Intel encourages its customers to recycle its products and their components (e.g., batteries, circuit
boards, plastic enclosures, etc.) whenever possible. In the U.S., a list of recyclers in your area can
be found at:
In the absence of a viable recycling option, products and their components must be disposed of in
accordance with all applicable local environmental regulations.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
EMC Regulations
installed in a compatible host system.
Table 40. EMC Regulations
Regulation
Title
FCC Class B
Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B,
Radio Frequency Devices. (USA)
ICES-003 (Class B)
Interference-Causing Equipment Standard, Digital Apparatus. (Canada)
EN55022: 1998 (Class B)
Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (European Union)
EN55024: 1998
Information Technology Equipment – Immunity Characteristics Limits and
methods of measurement. (European Union)
AS/NZS 3548 (Class B)
Australian Communications Authority, Standard for Electromagnetic
Compatibility. (Australia and New Zealand)
CISPR 22, 3rd Edition,
(Class B)
Limits and methods of measurement of Radio Disturbance Characteristics of
Information Technology Equipment. (International)
CISPR 24: 1997
Information Technology Equipment – Immunity Characteristics – Limits and
Methods of Measurement. (International)
VCCI (Class B)
Voluntary Control for Interference by Information Technology Equipment
(Japan)
Japanese Kanji statement translation: This is a Class B product based on the standard of the
Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
Korean Class B statement translation: This is household equipment that is certified to comply with
EMC requirements. You may use this equipment in residential environments and other non-
residential environments.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D865GVHZ Product Guide
Product Certification Markings (Board Level)
Desktop Board D865GVHZ has the following product certification markings:
Table 41.
Product Certification Markings
Description
Mark
UL joint US/Canada Recognized Component mark. Includes adjacent UL file
number for Intel desktop boards: E210882 (component side).
FCC Declaration of Conformity logo mark for Class B equipment; includes Intel
name and D865GVHZ model designation (component side).
CE mark. Declares compliance to European Union (EU) EMC directive
(89/336/EEC) and Low Voltage directive (73/23/EEC) (component side). The
CE mark should also be on the shipping container.
Australian Communications Authority (ACA) C-tick mark. Includes adjacent
Intel supplier code number, N-232. The C-tick mark should also be on the
shipping container.
Printed wiring board manufacturer’s recognition mark: consists of a unique UL
recognized manufacturer’s logo, along with a flammability rating (solder side).
V-0 or 94V-0
88
Download from Www.Somanuals.com. All Manuals Search And Download.
|