How to Build a Cluster
Intel® Server Board S5000PAL
Recipe ID: 15PLTF240000000100-04
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
The information contained in this document is provided for informational purposes only and represents the current view of Intel Corporation
(“Intel”) and its contributors ("Contributors") on, as of the date of publication. Intel and the Contributors make no commitment to update the
information contained in this document, and Intel reserves the right to make changes at any time, without notice.
DISCLAIMER. THIS DOCUMENT, IS PROVIDED “AS IS.” NEITHER INTEL, NOR THE CONTRIBUTORS MAKE ANY REPRESENTATIONS OF ANY KIND WITH
RESPECT TO PRODUCTS REFERENCED HEREIN, WHETHER SUCH PRODUCTS ARE THOSE OF INTEL, THE CONTRIBUTORS, OR THIRD PARTIES. INTEL,
AND ITS CONTRIBUTORS EXPRESSLY DISCLAIM ANY AND ALL WARRANTIES, IMPLIED OR EXPRESS, INCLUDING WITHOUT LIMITATION, ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, NON-INFRINGEMENT, AND ANY WARRANTY ARISING OUT OF THE
INFORMATION CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION, ANY PRODUCTS, SPECIFICATIONS, OR OTHER MATERIALS REFERENCED
HEREIN. INTEL, AND ITS CONTRIBUTORS DO NOT WARRANT THAT THIS DOCUMENT IS FREE FROM ERRORS, OR THAT ANY PRODUCTS OR OTHER
TECHNOLOGY DEVELOPED IN CONFORMANCE WITH THIS DOCUMENT WILL PERFORM IN THE INTENDED MANNER, OR WILL BE FREE FROM
INFRINGEMENT OF THIRD PARTY PROPRIETARY RIGHTS, AND INTEL, AND ITS CONTRIBUTORS DISCLAIM ALL LIABILITY THEREFOR.
INTEL, AND ITS CONTRIBUTORS DO NOT WARRANT THAT ANY PRODUCT REFERENCED HEREIN OR ANY PRODUCT OR TECHNOLOGY DEVELOPED IN
RELIANCE UPON THIS DOCUMENT, IN WHOLE OR IN PART, WILL BE SUFFICIENT, ACCURATE, RELIABLE, COMPLETE, FREE FROM DEFECTS OR SAFE
FOR ITS INTENDED PURPOSE, AND HEREBY DISCLAIM ALL LIABILITIES THEREFOR. ANY PERSON MAKING, USING OR SELLING SUCH PRODUCT OR
TECHNOLOGY DOES SO AT HIS OR HER OWN RISK.
Licenses may be required. Intel, its contributors and others may havepatents or pending patent applications, trademarks, copyrights or other
intellectual proprietary rights covering subject matter contained or described in this document. No license, express, implied, by estoppel or
otherwise, to any intellectual property rights of Intel or any other party is granted herein. It is your responsibility to seek licenses for such
intellectual property rights from Intel and others where appropriate.
Limited License Grant. Intel hereby grants you a limited copyright license to copy this document for your use and internal distribution only. You may
not distribute this document externally, in whole or in part, to any other person or entity.
LIMITED LIABILITY. IN NO EVENT SHALL INTEL, OR ITS CONTRIBUTORS HAVE ANY LIABILITY TO YOU OR TO ANY OTHER THIRD PARTY, FOR ANY
LOST PROFITS, LOST DATA, LOSS OF USE OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY DIRECT, INDIRECT,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF THIS DOCUMENT OR RELIANCE UPON THE INFORMATION CONTAINED
HEREIN, UNDER ANY CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL, OR ANY CONTRIBUTOR HAS ADVANCE
NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL
PURPOSE OF ANY LIMITED REMEDY.
Intel, the Intel logo, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007, Intel Corporation. All Rights Reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Introduction
This Intel ESAA recipe describes the steps required to build a High Performance Computing (HPC)
cluster based upon the Intel S5000PAL server board; from hardware assembly through performance
testing and cluster application development. It includes various options for hardware design,
interconnects, management, BIOS and OS provisioning, job schedulers, cluster tools and cluster
application development packages and runtime environments.
Note: It is recommended that the entire document is read prior to any installation activity
Overview
As mentioned above, this recipe illustrates the beginning to end setup and implementation of a HPC
cluster. The basic outline of the recipe is as follows:
1) Cluster hardware setup – racks, power, cabling, switches, etc.
2) Server management – application options for pre boot and post boot system management
3) Node BIOS provisioning – a PXE environment to boot nodes to DOS for updates
4) Node OS provisioning and Cluster Management with Platform Open Cluster Stack (OCS)– An OS
provisioning solution for easily deploying, running and managing cluster operating environments
5) Cluster Application Development and Application Execution Environments – Complete packages
for running, developing and optimizing cluster applications, and testing cluster performance.
Each of these sections will include either references to locations of existing documentation or
detailed instructions on how to setup specific installationrequirements.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Hardware Components
Quantity per Item
node
Manufacturer Model
1
1
1
Intel® Server Board
Intel
S5000PAL
SR1500
Intel® Server Chassis Intel
Intel® HDD
Intel
ASR1500PASBP
Backplane –
SR1500 1U
SATA/SAS passive
4GBPer
Server
Board
Memory
Any supported Please refer to the Tested Memory List at
http://www.intel.com/support/motherboards/server/s5000
pal/sb/CS-022919.htm
2 Per Server Intel® Xeon®
Board Processors
Intel
Please refer to the Qualified and Supported Processor List
at Please refer to the Tested Memory List at
http://www.intel.com/support/motherboards/server/sb/CS-
022346.htm
2 Per Server 1U passive heatsink Intel
AXXUPHS
Board
(light weight with
heat pipe)
1 (minimum) SATA 3.5” hard
Any supported Please refer to the Intel® Tested Hardware and Operating
Per Server
Board
drive
System List at
http://www.intel.com/support/motherboards/server/sb/CS-
022920.htm
1 Per Server PCI-E InfiniBand*
7104-HCA-LPX2P - Dual port PCIExpress 8x SDR
MemFree
Board
Host Channel
Adapter
7104-HCA-LPX2P-DDR - Dual port PCIExpress 8x DDR
QLogic
MemFree
Please refer to SilverStorm (QLogic) recipes for cluster
configurations from 8 to 256 nodes for SDR or DDR
1 Optional
Per Server
Board
InfiniBand* Host
Channel Adapter
QLE 7140-CK - Single Port 10 GBs InfiniBand to x8 PCI
Express Adapter
Qlogic
Please refer to SilverStorm (QLogic) recipes for cluster
configurations from 8 to 256 nodes for SDR or DDR
5
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
1 Optional
Per Server
Board
InfiniBand* Host
Channel Expansion
Module
AXXIBIOMOD
Intel
As Needed
InfiniBand cables
InfiniBand switch
Any supported
Any supported
1 (min per
cluster)
1 (min), As
Needed
Ethernet cables
Ethernet switch
Any supported
Any supported
1 (min per
cluster)
1 (min per
cluster)
Keyboard, Video,
Any supported
Any supported
Mouse (KVM) switch
1
KVM cables
Table 1 – Hardware Bill of Materials
6
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Software Used in the Installation
Dist. By
Description
File Name
Platform Computing
Open Cluster Stack (OCS) 4.1.1-1.1
(RHEL 4 Update 3)
or
Open Cluster Stack (OCS) 4.1.1-2.1
(RHEL 4 Update 4)
Intel
Intel
Intel® Tools 4.1.9.
System Management Software
Table 2 - Software Bill of Materials
Hardware Installation
Server racks
Depending on the size of the cluster being built, the Front End, switches and any management nodes
should be centrally located if multiple racks are being installed. Cluster nodes should follow a clear and
organized numbering scheme to aid in node identification. Cable, power, and cooling plans are very
important and must be carefully considered. These plans drive the ultimate layout of equipment in the
racks. A typical configuration involves switches and servers in the same rack. An example of a large
rack layout is illustrated by figure 1 below.
Note: Platform* compute node numbering begins at 0. Rack identification numbers begin at 1.
2’
42U
Clust
er
switc
h
centra
3’ Raised Floor
Figure 1. Server racks
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Remote console configuration / KVMIP
Using a KVMIP solution is one method for supplying remote console access to all cluster nodes.
Connect and configure the supported KVMIP solution such that there is remote console access for
each node in the cluster.
Ethernet Switches and Cables
Aside from the Front Endhaving more than one Ethernet interface, cluster nodes should only require
a single Ethernet interface for management communication. Ethernet switches and cables used
should be Gigabit capable. At least one Ethernet switch should be used per cluster. Larger clusters
may require higher capacity switches or tiered switch configurations.
If “spanning tree” is enabled on the switch, it dramatically slows PXE installation because each port in
the switch is determining where it fits in the spanning tree to avoid loops in the network. Use caution
when changing the spanning tree configuration options on the switch.
Infiniband Switches and Host Channel Adapters
Within each server, a host channel adapter (HCA) must be installed. When installing an HCA, consult
either the server motherboard documentation or server vendor to ensure that the fastest available
PCI-E slot is selected.
Note: The HCA should be the only device on the bus.
If they are used, it is also recommended that you place any InfiniBand switch(s) at the bottom of a
rack. This allows any inter-rack cables to be cleanly routed below the floor.
Handling InfiniBand Cables
InfiniBand cables are more sensitive than other types of networking cables (such as Ethernet and
Fiber Channel); therefore, greater care must be taken when handling them.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Rotating InfiniBand Connectors
If the InfiniBand cable connector is not properly oriented to fit onto the port receptacle when you
attempt to insert it, do not twist the connector to achieve the correct orientation.
Figure 2. Rotating InfiniBand* Connectors
Instead, reach back a few feet on the cable, and twist the bulk cable to allow the connector to rotate
to the proper orientation. Doing this prevents applying all of the rotational force directly at the plug
terminations.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Minimum Cable Bend Radius
InfiniBand cables can be damaged if they are bent beyond the minimum bend radius. Damage can
occur even if the cables are temporarily bent beyond this limit during installation. It is helpful to “pre-
form” the cables to the bent condition prior to installation. This reduces any undue strain at the plug
or receptacle connection at the time of installation. Figure 3 illustrates the areas that are of particular
concern, and Figure 4 provides measurement guidelines.
Figure 3. InfiniBand* Cable Bend Radius
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Connector Side View
Connector Top View
Wrapping Cable
Figure 4. InfiniBand* Cable Bend Radius Recommendations
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Server Management
The S5000PAL server board comes with a variety of management utilities for updates and
maintenance. The Intel System Management Software package will enable remote maintenance and
management of the cluster nodes from a centralized system. Download the package here:
http://downloadcenter.intel.com/scripts-df-
external/filter_results.aspx?strTypes=all&ProductID=2363&OSFullName=All+Operating+Systems&la
ng=eng&strOSs=All&submit=Go%21
The Intel System Management Software provides a lower level of management to the user for
remote operations and maintenance. Download the package here:
http://downloadcenter.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2363
BIOS and Firmware Provisioning
At times it may become necessary to update some or allnodes to the latest revisions of BIOS and
Firmware and set all the required BIOS settings for optimal performance. This section explains how
this is accomplished in a multi node compute cluster using existing recipes available from the Intel
ESAAweb site. Once you have assembled your cluster and are ready to perform any or all BIOSand
Firmware provisioning, go to the following website and download the recipe “BIOS and Firmware
Provisioning for Intel© Server Board S5000PAL.”
http://www.esaa-members.com
This recipe illustrates in detail how to build a PXE boot environment on a Red Hat RHEL 4 U3 server.
This will allow the cluster nodes to boot up and automatically update the necessary BIOS depending
on what is required. It is a fully configurable custom DOS boot image. It is assumed that the user will
have a working understanding of DOS and how to make, edit and automate batch files and
executables. For the Intel® Server Board S5000PAL, go to the website below to download the most
current BIOS update package:
http://downloadcenter.intel.com/scripts-df-
external/filter_results.aspx?strTypes=all&ProductID=2451&OSFullName=All+Operating+Systems&la
ng=eng&strOSs=All&submit=Go%21
Unzip these files and place them into the DOS image created from the provisioning recipe above.
Modifying some of the batch files may be needed. To execute multiple batch files from within a
bootable DOS image, modify the autoexec.bat to call other batch files. An example autoexec.bat file is
included in the update download.
Once each node has been booted to the DOS image it will go through the entire update as specified in
the autoexec.bat file. Once finished, it will wait for a prompt from the user. At this point each node will
be ready to be rebooted manually, via Intel® AMT or with Intel® System Management.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
Note: Make sure that the BIOS and Firmware provisioning PXE server is shutdown prior to
rebooting the nodes or they will go into a reboot loop and provision the BIOSand Firmware again.
At this point the cluster is ready forOperating System (OS) provisioning. Ensure that the provisioning
solution begins here so that the next time the cluster nodes are rebooted they will boot from the OS
provisioning server.
OS Provisioning and Cluster Management
The cluster OS provisioning method deployed is up to the user(s). The ESAA solutions below offer
several options on OS provisioning with various high speed interconnects.
Platform OCS 4.1.1 -1.1/4.1.1-2.1
The Platform Computing OS provisioning solution offers an end to end solution for deploying clusters
from a Front End including options for either Intel or SilverStorm high speed interconnect support.
The Platform Computing OCS 4.1.1-1.1/4.1.1-2.1 (“High-Performance Computing (HPC) Cluster
Installation using Platform Open Cluster Stack (OCS)* 4.1 on Red Hat* Enterprise Linux* 4.3 - Intel®
Server Board S5000PAL” or “Platform Open Cluster Stack (OCS)* 4.1.1- 2.1 on Red Hat Enterprise
Linux* 4.4 - Intel® Server Board S5000PAL”) recipes for this platform can be found on the ESAA
website:
http://www.esaa-members.com
Once you have a Linux OS installed, and the IB interconnect has been installed with the SilverStorm
RPM, the separate SilverStorm recipe for (High-Performance Computing (HPC) Cluster Installations
using SilverStorm* InfiniBand* Interconnect on Linux* - Intel® Server Board S5000PAL) can be used as
reference for additional installation and configuration. (http://www.esaa-members.com)
Z RESEARCH GlusterHPC
GlusterHPC automates installation of High Performance Computational Clusters / Supercomputers on
commodity Intel platform. It is extensible, portable across various GNU/Linux distributions, scalable to
several thousand nodes and has clean easy to use dialog interface. GlusterHPC provides HPC tools
and libraries in addition to OS packages and pre-configures them at the time of provisioning. It
essentially converts a stand-alone GNU/Linux distribution into a Cluster distribution.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
The Z RESEARCH* GlusterHPC* Installation- Intel® Server Board S3000AH recipe for this platform
can be found on the ESAA website:
http://www.esaa-members.com
Cluster Tools
Once the cluster has been deployed, there are several tool suites that can be used to verify
functionality and tune performance. Included in the Platform* OCS* installation is the Intel® MPI Library
2.0.1runtime environment. Additionally, the Intel® Tools suite version 4.1.9 can be installed during the
Platform OCS 4.1.1-1.1/4.1.1-2.1 install as well as post install." It may be downloaded from the link
below:
http://my.platform.com
To install the Intel® Tools 4.1.9. Roll, use the Platform* OCS*installation instructions detailing how to
install additional rolls. Intel® Tools suite 4.1.9 includes Intel Compilers, however to compile applications
installing licenses is required. (If the licenses are not installed, the compiling functionality of the Intel
Compilers will not be available; however a runtime environment will still be available.)
The licenses can be installed with the following steps. Perform the following as root prior to rolling
any compute nodes:
1) Copy license files to be used on the Front Endto: /opt/intel/licenses
2) Create the directory: /export/apps/intel/licenses
3) Copy license files to be used on the compute nodes to: /export/apps/intel/licenses
4) Create a script called intel_license.sh. The script should be:
#!/bin/sh
rm -rf /opt/intel/licenses
ln -s /share/apps/intel/licenses /opt/intel/licenses
5) Use rocks-compute to add the script to the post-install
# rocks-compute -s intel_license.sh -b
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
6) New licenses can be added by placing them in: /export/apps/intel/licenses on the Front End.
If this optional roll was not installed, another choice is to install the Intel Cluster Toolkit for Linux. It
can be obtained at the following URL:
http://www3.intel.com/cd/software/products/asmo-na/eng/cluster/244171.htm
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Build a Cluster - Intel® Server Board S5000PAL
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|