Intel Network Card PRO User Manual

EtherExpress PRO/100 CardBus  
Mobile Adapter  
User’s Guide  
How to Use This Manual  
This User’s Guide contains the latest and most complete information  
available at press time on the installation and operation of the PRO/100  
CardBus adapter. It is designed to help both new and experienced network  
users install and configure the Intel product in the shortest time possible.  
Overview of the Installation Process  
For an overview of the installation process, see the Late Breaking News card  
and Chapters 1 and 2 in this User’s Guide. For technical details on configu-  
ration issues see Chapter 3, Configuration Reference.  
How to Find More Information  
Use the Table of Contents, Index, and page and text headings in this User’s  
Guide to help you find what you need. Check the README file on the  
Network Drivers diskette. To check for updated drivers, access the Intel  
website at:  
http://support.intel.com  
See Appendix A for additional support information.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Hardware Installation .............................................. 1  
Before Installing Hardware ................................................................... 1  
Installing the Hardware ......................................................................... 3  
What to Do Next ................................................................................... 5  
Software Installation ............................................... 7  
CardBus Installation Guidelines ........................................................... 7  
Installing with Windows 95 .................................................................. 8  
Determining Your Version of Windows 95 ........................................... 8  
Installing with Windows 95 .................................................................. 9  
Version 4.00.950 or 4.00.950a .............................................................. 9  
Installing with Windows 95 ................................................................ 15  
Version 4.00.950b (OSR2) or Later .................................................... 15  
Installing NetWare Client 32 ODI Drivers under Windows 95 .......... 16  
Installing with Windows NT 3.51 and 4.0 .......................................... 18  
Installing with Windows 3.x and Windows for Workgroups .............. 21  
Installing under IBM OS/2 (Warp 3.0 and 4.0) Using the NDIS  
or ODI Driver .............................................................................. 22  
Installing Network Software ............................................................... 25  
Artisoft LANtastic version 6.0............................................................ 26  
AT&T StarGROUP LAN Manager version 2.1a ................................ 26  
Banyan VINES version 5.5 & 6.0 ....................................................... 26  
DEC PATHWORKS versions 5.x or 6.x ............................................. 28  
FTP Software LANWatch ................................................................... 31  
FTP Software PC/TCP ........................................................................ 33  
Generic Installation ............................................................................. 37  
HP LAN Manager ............................................................................... 37  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
IBM Local Area Network Support Program....................................... 38  
IBM Local Area Network Support Program (version 1.2) ................. 39  
IBM PC LAN and IBM DOS LAN Requester ................................... 40  
Manual Installation ............................................................................. 41  
Microsoft LAN Manager .................................................................... 41  
Windows for Workgroups ................................................................... 43  
Novell NetWare ................................................................................... 47  
SunSoft PC-NFS (version 3.5) ............................................................ 48  
Novell NetWare 32-bit ODI Drivers ................................................... 49  
Ungermann-Bass Net/One for DOS ................................................... 51  
Wollongong PathWay Access for DOS ............................................... 52  
Configuration Reference....................................... 55  
Who Should Consult This Chapter? ................................................... 55  
Special Features .................................................................................. 56  
Sample Configuration Files for Selected Network Operating  
Systems ....................................................................................... 60  
Artisoft LANtastic/AI 6.0 ................................................................... 60  
Banyan VINES .................................................................................... 63  
DEC PATHWORKS 5.0 and 5.1 ......................................................... 64  
Windows for Workgroups 3.11 ........................................................... 65  
Windows for Workgroups Using the ODI Driver with NetWare as  
Secondary Network...................................................................... 67  
Driver Parameters Reference .............................................................. 71  
ODI Settings (for driver M32AODI.COM and M32AODI.OS2) ...... 71  
NDIS 2.0.1 Settings (for drivers M32ANDIS.EXE and  
M32ANDIS.OS2) ........................................................................ 73  
M32A.SYS (NDIS 3) Settings for Microsoft Windows NT and  
Windows 95.................................................................................. 76  
Novell Client 32 Driver Settings (for driver M32A.LAN) ................. 79  
Novell Client32 Driver Keywords ...................................................... 79  
Packet Driver Settings (for driver ....................................................... 80  
M32APD.COM) .................................................................................. 80  
Diagnostic Test Utility Settings (M32ATEST.EXE) .......................... 82  
Keyword Alphabetical Reference ....................................................... 82  
Troubleshooting..................................................... 89  
LED Indicators .................................................................................... 90  
Diagnostic Self Test (MS-DOS only) ................................................. 91  
Error Messages .................................................................................... 94  
General Troubleshooting..................................................................... 98  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C O N T E N T S  
Network Operating System Troubleshooting ................................... 104  
Troubleshooting Checklist ................................................................ 116  
Intel Automated Customer Support ................... 119  
Specifications ...................................................... 121  
General Specifications ...................................................................... 121  
General Specifications (continued)................................................... 122  
Compatibility..................................................................................... 122  
Technical Specifications.................................................................... 123  
Limited Lifetime Warranty ................................. 125  
Network Software License Agreement .............. 129  
Regulatory Agency Notices................................ 133  
Index ..................................................................... 135  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Hardware Installation  
Follow the instructions in this chapter to install the PRO/100 CardBus  
adapter hardware and network cabling. See Chapter 2, Software  
Installation for instructions on how to install network software.  
The PRO/100 CardBus adapter provides access to both 10 Mbps and 100  
Mbps networks with a single adapter cable, and auto-senses 10 Mbps or  
100 Mbps network speed. The Adapter requires Category 5 (data  
grade) unshielded twisted pair (UTP) cabling for 100 Mbps or  
Category 3 or 5 for 10 Mbps.  
Before Installing Hardware  
Check Package Contents:  
PRO/100 CardBus adapter  
A LAN adapter cable with 15-pin PC Card connector at one end  
and a RJ-45 connector at the other (for 100Base-TX or 10Base-T  
Ethernet connectivity)  
Software on two 3.5-inch diskettes  
Late Breaking News card  
User’s Guide  
Product registration card  
Protective adapter case  
NOTE:  
Please fill out the Product Registration Card and mail it immediately.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 1  
Verify Other Required Equipment  
To install the PRO/100 CardBus adapter, you need the following:  
1 A portable PC with a CardBus slot. Note that CardBus slots are  
different from 16-bit PCMCIA slots. If your CardBus adapter does not  
fit in your slot, it may be a 16-bit slot. Contact your computer dealer for  
more information.  
2 A local area network supporting 10 or 100 Mbps Ethernet, as required,  
and a network operating system supported by the PRO/100 CardBus  
adapter. See Chapter 2, Software Installation for a list of the  
network operating systems supported.  
NOTE:  
Since the PRO/100 CardBus adapter automatically detects the speed of the network  
to which it is connected, it may be safely connected to either a 100Base-TX or  
10Base-T network, as specified in items 3 and 4 below.  
3 For connection to a 100Base-TX 100 Mbps Ethernet network, a  
Category 5 (data grade) unshielded twisted pair (UTP) network cable  
terminating in a male RJ-45 connector.  
4 For connection to a 10Base-T twisted pair Ethernet network, a network  
cable terminating in a male RJ-45 connector and connected to a 10  
Mbps hub or switch.  
Determine System Requirements  
During installation of the PRO/100 CardBus adapter hardware, power to  
the computer should be ON and your operating system should be running.  
If configured to do so, your system will detect the PRO/100 CardBus  
adapter. For details on how to install driver software for your particular  
environment, see Chapter 2, Software Installation.  
The PRO/100 CardBus adapter hardware is compatible with Types II and  
III PC Card slots that support CardBus technology. Installation and  
removal procedures may vary on different computers.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
HardwareInstallation  
Installing the Hardware  
Insert the PRO/100 CardBus adapter  
1 Grasp the PRO/100 CardBus adapter by the edges with the Intel  
label facing upward and the wide PC Card connector next to the insert  
slot.  
2 Insert the card into a CardBus slot and push it in until it is firmly  
seated.  
NOTE:  
The PRO/100 CardBus adapter will not fit in a slot that does not support CardBus  
technology.  
32 bit  
CardBus  
Intel EtherExpress  
PRO/100 Mobile Adapter  
Inserting the PRO/100 CardBus adapter into the Computer  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 1  
Removing the PRO/100 CardBus adapter  
Follow the PC card removal instructions specified in the documentation for  
your computer.  
Connecting the LAN Adapter Cable to the Card  
Attach the 15-pin connector at the end of the Intel adapter cable to the  
mating connector on the end of the adapter (see illustration below).  
Press the cable connector gently into the connector on the card until it  
clicks into place. Do not force the connection.  
32 bit  
CardBus  
Intel EtherExpress  
PRO/100 Mobile Adapter  
Connecting the LAN Adapter Cable to the PRO/100 CardBus adapter  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
HardwareInstallation  
Connecting the Network Cable to the LAN Adapter Cable  
Plug the network cable into the female RJ-45 connector, as shown in  
the figure.  
32 bit  
CardBus  
Intel EtherExpress  
PRO/100 Mobile Adapter  
Connecting to the Network Cable to LAN Adapter Cable  
What to Do Next  
After installing the hardware and connecting cables, proceed to Chapter 2.  
Software Installation. You will need the Intel Installation Disk and  
Network Drivers Disk.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 1  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Software Installation  
CardBus Installation Guidelines  
The PRO/100 CardBus adapter can be used in Windows 3.x, Windows 95,  
Windows NT, and MS-DOS environments, and with most common  
network operating systems. However, some current operating systems or  
Card and Socket Services versions do not yet support CardBus technology.  
In these cases you will be able to use the PRO/100 CardBus adapter, but  
you will not be able to use or swap PC Cards or other CardBus adapters  
while using the adapter.  
Installation instructions and guidelines are provided in this chapter for the  
fully supported and unsupported CardBus environments known at the time  
of publication.  
The installation topics covered are:  
Windows* 95  
Windows 95 using Novell Client 32  
Windows NT*  
Windows 3.x, Windows for Workgroups  
IBM OS/2* Warp  
Others, listed in alphabetical order  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Installing with Windows 95  
The first release of Windows 95 (4.00.950 or 950a) included built-in  
support for 16-bit PC Cards but not for 32-bit CardBus. However, your  
PRO/100 CardBus adapter can still be installed under Windows 95. See  
the procedure on the next page.  
Cardbus built-in support is included in Windows 95 OEM Service Release  
#2 (also known as Windows 95 OSR2 or version 4.00.950b).  
Please review the README.TXT file on the Installation Disk and visit the  
Intel website for the latest information on CardBus support in Windows  
95.  
DeterminingYourVersion ofWindows 95  
Follow the steps below to determine which version of Windows 95 you are  
running:  
1
2
3
4
Click on the Start button.  
Select Settings.  
Select the Control Panel.  
Double-click on the System icon.  
The System Properties dialog box opens.  
Select the General tab.  
5
Information about your system is displayed, including the version of  
Windows 95 you are running, under “System.”  
Versions 4.00.950 or 4.00.950a. For installation procedures  
(including special instructions for Toshiba computers), see the  
section titled “Installing with Windows 95 Version 4.00.950 or  
4.00.950a.”  
Version 4.00.950b (also known as OSR2). For installation  
procedures, see the section titled “Installing with Windows 95  
Version 4.00.950b (OSR2) or Later.”  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Installing with Windows 95  
Version 4.00.950 or 4.00.950a  
Windows 95 does not include ‘Hot Swap’ support for CardBus adapters.  
The PRO/100 CardBus adapter includes a driver that will let you use the  
device within Windows 95. To use this driver, however, you must first  
disable support for PC Cards in Windows 95. This means you cannot  
simultaneously use another CardBus adapter or PC Card with the PRO/100  
CardBus adapter.  
To install with Windows 95 Version 4.00.950 or  
4.00.950a:  
NOTE:  
For Toshiba portable computers with CardBus support, see the separate installa-  
tion instructions under the heading “ Installing Toshiba Computers with Windows  
95 version 4.00.950 or 4.00.950a” later in this section.  
1
2
3
4
Insert the PRO/100 CardBus adapter.  
Click Start.  
Choose Settings.  
Choose Control Panel.  
The Control Panel opens.  
Double-click the Network icon.  
The Network window opens.  
Click Add.  
5
6
7
8
9
The Select Network Component Type window opens.  
Double-click Adapter.  
The Select Network Adapter window opens.  
Click Have Disk.  
The Install From Disk window opens.  
Insert the Intel Drivers Disk.  
10 With A:\ in input box, click OK (or type in the correct path).  
The Select Network Adapter window reopens.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
11 Under “Manufacturers,” click “Intel.”  
12 Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 manual  
load." Note that this is the second driver listed. You may need to  
scroll the text to see the entire driver name.  
13 Click OK.  
14 The Network window reopens.  
15 Click OK.  
The Intel dialog box appears displaying various settings. An asterisk  
in any field indicates that the current setting is incorrect. Use the Up  
or Down arrow to adjust the setting until the asterisk disappears.  
16 Click OK.  
The Copying Files window opens.  
17 Insert your original Windows 95 CD or disk (identify the drive that  
holds the CD or disk) and click OK.  
The System Settings window opens.  
NOTE:  
If Windows 95 was pre-installed on your computer, the necessary files are lo-  
cated in the following directory:  
C:\WINDOWS\OPTIONS\CABS  
18 Click No when prompted to restart the computer. (But click Yes for  
Toshiba computers with CardBus support, as described in step 12  
under the heading “Installing Toshiba Computers with Windows 95  
version 4.00.950 or 4.00.950A” later in this section.)  
DO NOT RESTART the computer at this time (unless you are using  
a Toshiba CardBus computer). First, complete the following steps to  
disable PC Card support:  
NOTE:  
Some portable computers require that PCMCIA support be disabled through the  
computer's BIOS in addition to the steps below. Before completing the following  
steps, please review the README.TXT file on the Network Drivers Disk for com-  
puter-specific information.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
1
In the Control Panel, double-Click the System icon.  
The System Properties window opens.  
Click the Device Manager tab.  
2
3
4
5
Double-click PCMCIA Socket.  
Click PCIC or compatible PCMCIA controller.  
Click Remove.  
A removal confirmation window opens.  
Click OK.  
6
The System Settings Change window opens.  
Remove the Network Drivers Disk from the floppy drive.  
Click Yes to restart the computer.  
7
8
When you restart the computer the first time after removing the PCIC  
device, you will be prompted to select a driver. Choose Do not install a  
driver. This prompt is not displayed again.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Re-enabling PC Card support with Windows 95  
Version 4.00.950 or 4.00.950a  
If you have disabled PC Card and Socket support in order to use the  
PRO/100 CardBus adapter, and now want to use another PC Card, such as  
a PC Card modem in your computer, you will first need to re-enable the  
PC Card support as described in the following steps:  
1
2
3
Click Start.  
Choose Settings.  
Choose Control Panel.  
The Control Panel window opens.  
Double-click the Network icon.  
The Network window opens.  
Click the Configuration tab.  
4
5
6
Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 Manual  
Load.”  
7
8
9
Click Remove.  
Click OK.  
Click No when prompted to restart the computer.  
DO NOT RESTART the computer at this time. First, complete the  
following steps to re-enable PC Card support:  
1
In the Control Panel, double-click the System icon.  
The System Properties window opens.  
2
3
4
Click the Device Manager tab.  
Double-click PCMCIA Socket.  
Double-click PCIC or Compatible Controller.  
The PCIC or Compatible Controller Properties window opens.  
Click the Drivers tab.  
5
6
Click the Change Driver button.  
The Select Device window opens.  
7
Select “PCIC or compatible PCMCIA controller,” and click OK.  
The PCIC or Compatible Controller Properties window reopens.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
8
9
Click OK.  
The System Properties window reopens.  
Click Close.  
10 Click Start.  
11 Select Shut Down.  
12 Select Restart the Computer and click Yes.  
Your computer is now set to use other PC Card devices.  
Installing Toshiba Computers with Windows 95  
Version 4.00.950 or 4.00.950A  
If you are installing the PRO/100 CardBus adapter on Toshiba portables  
with CardBus support, including the Tecra 700 series, Tecra 500 series  
and Protégé 650, please follow use the following installation procedures:  
1
Determine which version of Windows 95 you have, using the  
guidelines under the heading “Determining Your Version of Windows  
95” earlier in this chapter.  
2
If your version of Windows 95 is version 4.00.950 or 4.00.950a,  
complete the following steps. If your version of Windows 95 is  
version 4.00.950b (OSR2) or later, follow the instructions later in this  
chapter for those versions.  
3
Before installing the PRO/100 CardBus adapter, it is necessary to  
modify PC Card support on the computer via Toshiba’s BIOS setup  
program.  
4
5
6
Press Start, and select Shutdown. Select Restart in MS-DOS mode to  
reboot your machine.  
At the DOS prompt, run the Toshiba setup program by typing  
TSETUP and press Enter.  
On the setup program menu, look for an item titled “PC Card  
Controller Mode”. If the mode is set to PCIC Compatible, proceed to  
step 7. If the mode is set to CardBus/16-bit, press the End button on  
your keyboard and then Y for Yes. Proceed to step 11.  
7
Use the down arrow key to navigate through the Toshiba setup menu  
to the “PC Card Controller Mode” field.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
8
9
Press the space bar until the PC Card Controller Mode is set to  
CardBus/16-bit.  
Press the End button on your keyboard and press Y when prompted.  
10 Reboot your computer.  
11 Perform steps 1 through 17 under the heading “Installing with  
Windows 95 version 4.00.950 or 950a” at the beginning of the  
Installing with Windows 95 section earlier in this chapter.  
12 After completing steps 1 through 17, select Yes when prompted to  
reboot the machine. At this point installation is complete.  
Re-enabling PC Card support on Toshiba Computers  
If you have disabled PC Card support in order to use the PRO/100  
CardBus adapter under Windows 95 version 4.00.950 or 950a, and now  
want to use a PC Card, such as a PC Card modem in your computer, you  
will need to re-enable PC Card support by following these steps:  
1
2
3
Click Start.  
Choose Settings.  
Choose Control Panel.  
The Control Panel window opens.  
Double-click the Network icon.  
The Network window opens.  
Click the Configuration tab.  
4
5
6
Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 Manual  
Load.”  
7
8
9
Click Remove.  
Click OK.  
Click No when prompted to restart the computer.  
10 Press Start, and select Shutdown. Select Restart in MS-DOS mode to  
reboot your machine.  
11 At the DOS prompt, run the Toshiba setup program by typing  
TSETUP.  
12 Use the down arrow key to navigate through the Toshiba setup menu  
to the “PC Card Controller Mode” field.  
13 Press the space bar until the PC Card Controller Mode equals PCIC  
Compatible.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
14 Press the End button on your keyboard and press Y when prompted.  
15 Reboot your computer.  
16 After your system has rebooted it is ready to support PC Cards under  
Windows 95.  
Installing with Windows 95  
Version 4.00.950b (OSR2) or Later  
Windows 95 OSR2 and later versions support CardBus. This means you  
can use the built-in PC Card support in Windows 95 to install, remove,  
and hotswap CardBus cards and PC Cards.  
To install the CardBus with Windows 95 Version  
4.00.950b (OSR2) or later:  
1
2
Insert the PRO/100 CardBus adapter.  
Allow the Plug and Play facility to install the PRO/100 CardBus  
adapter.  
3
When prompted for a disk, insert the Intel Network Drivers Disk.  
Enabling another PCMCIA or CardBus card in  
Windows 95 Version 4.00.950b (OSR2) or Later  
The PRO/100 CardBus adapter can be used simultaneously with another  
PCMCIA or CardBus card by using the Plug and Play feature to remove  
the PRO/100 CardBus adapter and install the new card.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Installing NetWare Client 32 ODI Drivers under  
Windows 95  
When installing the PRO/100 CardBus adapter under Windows 95 you  
have the option of installing either an NDIS3 driver (also known as  
Miniport) or a 32-bit ODI client driver (Client 32).  
Windows 95 installation instructions vary slightly for different versions of  
Windows 95. See the instructions earlier in this manual on how to  
determine your version of Windows 95, then follow the instructions below  
for your version.  
Installing under Windows 95 Version 4.00.950 or  
4.00.950a  
1
Follow the instructions earlier in this chapter on how to disable PC  
Card support in Windows 95, under the heading Installing with  
Microsoft Windows 95 Version 4.00.950 or 4.00.950a.  
2
Follow the steps below for Client 32 installation under Windows 95  
Version 4.00.950b. However, you may use any version of the Client  
32 Install Software.  
Installing under Windows 95 Version 4.00.950b or  
later (OSR2)  
NOTE  
Windows 95 version 4.00.950b requires Client 32 for Windows 95 version 2.12 or  
greater (ask your Network Administrator if you do not know which version of  
NetWare Client 32 you have).  
1
Follow the instructions earlier in this chapter for installing the Intel  
PRO/100 CardBus adapter under Windows 95 version 4.00.950b. This  
procedure will install the adapter with the NDIS3 (Miniport) driver.  
2
Click the Start button in the left bottom corner of your Windows 95  
Desktop and select Run. Then type the path to SETUP.EXE or  
Browse to the Client 32 install directory. Possible paths are:  
A:\  
if installing from Disk 1 of the diskette version  
C:\DIRECTORY_NAME\  
if installing from a directory on your hard disk  
\\NOVELL_SRV_NAME\SYS\PUBLIC\CLIENT\WIN95\IBM_ENU\  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
if installing from a Novell NetWare Server you are connected to.  
3
Once you have selected the proper path, run SETUP.EXE and follow  
the Novell instructions. At the last screen, DO NOT select REBOOT.  
Instead, click CUSTOMIZE.  
NOTE  
If prompted to insert the Windows 95 CD-ROM, click OK and type the path to the  
CABS directory on your hard drive (usually C:\WINDOWS\OPTIONS\CABS).  
4
The CUSTOMIZE option will take you to the Network dialog box  
where you may or may not have an adapter installed. DO NOT  
REMOVE any of the existing drivers. First ADD the 32 Bit ODI  
driver by selecting Add. Then in the Select Network Adapter Type  
box select Adapter. Next, in the Select Network Adapters box click  
Have disk and insert the Intel Network Drivers Disk (Disk 2). Select  
OK at the Install from Disk box. In the next window highlight Intel in  
the manufacturers column and Intel EtherExpress PRO/100 CardBus  
Adapter for NetWare Client 32 V1.0.  
5
6
This will take you back to the Network window where you may now  
remove the existing driver if there was one. You should be left with a  
Novell ODINSUP and an Intel PRO/100 CardBus adapter for  
NetWare Client 32 V1.0 adapter.  
If your laptop requires any special resources, you may select the  
adapter and Properties window to change them. Otherwise click OK .  
NOTE  
If asked to insert the NetWare Client 32 for Windows 95 Disk x click OK and enter  
the path to the Client 32 Install from Step 2 above.  
7
After rebooting, the driver will load but you may receive a New  
Hardware Found PCI Card message which will take you to the Update  
Device Driver Wizard window. At this window make sure you DO  
NOT have the drivers disk in drive A:. Then click Next >. The next  
window should display “Windows was unable to locate a driver for  
this device.” Now click Finish. You should not see this message in  
subsequent reboots. This step will leave a “?!PCI Card” indication in  
the Control Panel\System Properties\Device Manager\Other Devices  
section, but will not hinder operation of the driver. However, if you  
wish to reinstall the Miniport driver at a later time be sure, to remove  
the “?!PCI Card” line from the above named window.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Installing with Windows NT 3.51 and 4.0  
Windows NT 3.51 and 4.0 include full support for PC Cards and partial  
support for CardBus. The PRO/100 CardBus adapter includes a driver that  
will let you use the device within Windows NT. When loaded, this driver  
disables support for PC Cards in Windows NT. This means you cannot  
simultaneously use another CardBus or PC Card with the PRO/100  
CardBus adapter.  
Please review the README.TXT file on the Installation Disk and visit the  
Intel website for the latest information on CardBus support in Windows  
NT.  
The installation steps for Windows NT 3.51 and Windows NT 4.0 are  
slightly different, so they are addressed separately here.  
To install with Windows NT 3.51:  
1
2
Insert the PRO/100 CardBus adapter.  
Double-click the Control Panel.  
The Control Panel opens.  
3
4
Double-click the Network icon.  
The Network Settings window opens.  
Click Add Adapter.  
The Add Network Adapters window opens.  
Scroll to select “Other (requires disk from manufacturer).”  
Click Continue.  
5
6
The Insert Disk windows opens.  
Insert the Intel Network Drivers Disk .  
Click OK.  
7
8
The Select OEM Option window opens.  
Click OK.  
9
10 Intel EtherExpress PRO/100 CardBus Mobile Adapter Setup window  
opens, displaying the default settings.  
NOTE:  
In most circumstances, the default settings will properly operate the PRO/100  
CardBus adapter. However, consult the README.TXT file for specific settings (if  
necessary).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
11 Click OK.  
The Network Settings window reopens.  
12 Click OK.  
The Network Settings Change window opens.  
13 Click Restart Now to restart your computer.  
Re-enabling PC Card Support in Windows NT 3.51  
The PRO/100 CardBus adapter cannot be used simultaneously with a PC  
Card in Windows NT 3.51.  
To remove the PRO/100 32-bit Mobile Adapter from Windows  
NT 3.51:  
1
Double-click the Control Panel.  
The Control Panel opens.  
2
Double-click the Network icon.  
The Network Settings window opens.  
Choose the “Intel EtherExpress PRO/100 Mobile CardBus 32.”  
Click Remove.  
3
4
5
Click Yes to confirm.  
To install with Windows NT 4.0:  
1
2
3
4
Insert the PRO/100 CardBus adapter.  
Click Start.  
Choose Settings.  
Choose the Control Panel.  
The Control Panel opens.  
Double-click the Network icon.  
The Network Settings window opens.  
Click the Adapters tab.  
5
6
7
8
The Network Adapters window opens.  
Click Add.  
The Select Network Adapter window opens.  
Click Have Disk.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
9
Insert the Intel Network Drivers Disk .  
10 Click OK.  
The Select OEM Option window opens.  
11 Click OK.  
Windows NT Setup window briefly displays.  
12 PRO/100 CardBus adapter Settings window opens, displaying the  
default settings.  
NOTE:  
In most circumstances, the default settings will properly operate the PRO/100  
CardBus adapter. However, consult the README.TXT file for specific settings (if  
necessary).  
13 Click OK.  
The Network Settings window redisplays.  
14 Click Close.  
If any dialog boxes appear related to setting up network protocols,  
click Cancel, and contact your Network Administrator.  
15 When the Network Settings Change window opens, click Yes to  
restart your computer.  
Re-enabling PC Card Support in Windows NT 4.0  
The PRO/100 CardBus adapter cannot be used simultaneously with a PC  
Card in Windows NT 4.0.  
To remove the PRO/100 CardBus adapter from Windows NT 4.0:  
1
2
Double-click the Control Panel.  
The Control Panel opens.  
Double-click the Network icon.  
The Network Settings window opens.  
Choose the “Intel EtherExpress PRO/100 Mobile CardBus 32.”  
Click Remove.  
3
4
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Installing with Windows 3.x and Windows for  
Workgroups  
To install under Windows 3.x or Windows for Workgroups, use the Intel  
Installation Program. Insert the Installation Disk, into your disk drive, and  
proceed as follows (substitute the correct drive letter for your system):  
1
From the Program Manager, choose File, then Run. In the Command  
Line box, type the following:  
A:SETUP  
2
3
Press Enter or click OK.  
Select your network operating system from the list displayed and click  
OK.  
4
Follow the on-screen instructions. Note the following variations for  
NetWare and other network operating systems:  
Novell NetWare Installation  
With Novell NetWare highlighted, click the OK button. Intel  
provides all software necessary to configure your NetWare client  
workstation. Upon completion, the Installation Program will reboot  
your system. When your system comes back up, log in to the network.  
NOTE:  
The NetWare VLM shell is used to connect to your NetWare server. The Intel  
Installation Program will decompress and configure the necessary files. If you  
do not plan to use the Installation Program, see “ Manual Installation” in the  
alphabetical section of this chapter for instructions on how to decompress and  
load the NetWare VLM files.  
If you need NETX shell support, contact your System Administrator.  
Installation of Other Network Operating Systems  
For listed network operating systems other than Novell NetWare, highlight  
your network operating system and click the OK button. The Intel  
installation software will analyze your system and create a custom Intel  
Network Drivers Disk. Make sure your diskette is not write-protected  
when executing this step.  
5
Once you have completed the steps prompted by the Intel Installation  
Program, exit the program and find your network operating system in  
this chapter of the User’s Guide, using the alphabetical listing under  
the heading “Installing Network Software.” Follow the procedures  
indicated there to complete the installation.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
NOTE:  
Even though older Card and Socket Services software for MS-DOS and Windows  
3.X may not support CardBus, it may be possible to use another PC Card simulta-  
neously with the PRO/100 CardBus adapter. Please refer to the README.TXT file  
or the Intel website for the latest information and tips regarding Card and Socket  
Services.  
The Installation Program will modify your AUTOEXEC.BAT,  
CONFIG.SYS, and network configuration files to match the optimum  
configuration for your system.  
For detailed technical information on configuration files and settings, see  
Chapter 3, Configuration Reference and Chapter 4, Troubleshooting.  
Installing under IBM OS/2 (Warp 3.0 and 4.0)  
Using the NDIS or ODI Driver  
NOTE  
The PRO/100 CardBus adapter includes NDIS 2.0 and ODI drivers for OS/2. Cur-  
rently, the Card and Socket Services software in OS/2 does not support CardBus.  
Therefore, in order to install the CardBus driver in OS/2, OS/2’s Card and Socket  
Services must be disabled. Follow IBMs instructions for disabling Card and  
Socket Services.  
Installation Steps for Warp 3.0 and 4.0 (NDIS driver)  
1 Remove OS/2’s Card and Socket Services according to IBM’s  
instructions.  
By default, the CardBus NDIS driver will be installed. If you wish  
to install the ODI client, the Novell Client installation program  
should be used. See the OS/2 ODI Client install section for instruc-  
tions.  
2 Run MPTS (Multi-Protocol Transport Services). For Warp 3.0,  
MPTS is on the desktop. For Warp 4.0, MPTS is in System Setup.  
3 In the MPTS window, click on Configure  
4 In the Configure window, select the LAN adapter and protocols  
radio button, then click on Configure.  
5 In the LAPS Configuration window, in the Network Adapter  
section, click on Other Adapter.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
6 Set the path as A:\NDIS and click OK.  
7 Back at the LAPS Configuration window, in the Network Adapter  
section, select the PRO/100 CardBus adapter by clicking on it and  
then clicking Add.  
8 In the Protocols section, select the protocols you wish to use by  
clicking on the protocols and then clicking Add.  
9 In the Current Configuration section, click on PRO/100 CardBus  
adapter and click edit to edit the driver settings. The default  
settings for the product will be displayed. Generally, the default  
settings should be used. The most important to check are INT and  
SOCKET. If there is a conflict, these should be adjusted using trial  
and error.  
10 After reviewing the settings, click OK.  
11 Click OK again  
12 Click close  
13 Follow the onscreen instructions to complete installation.  
NOTE  
In Warp 4.0, a free interrupt can be found by running Hardware Manager (under  
System Setup). Under IRQ, look for a free one (the program shows whats used).  
Installation Steps for Warp 3.0 and 4.0 (ODI driver)  
The PRO/100 CardBus adapter includes NDIS2 and ODI drivers for  
OS/2. Currently, the Card and Socket Services software in OS/2 does not  
support CardBus. Therefore, in order to install the CardBus driver in  
OS/2, OS/2’s Card and Socket Services must be disabled. Follow IBM’s  
instructions for disabling Card and Socket Services.  
1 Remove OS/2’s Card and Socket Services according to IBM’s  
instructions.  
2 In order to install Intel’s OS/2 ODI driver, the Novell Netware  
Client for OS/2 installation disks are needed. Insert disk 1 of the  
OS/2 client installation disks (the WSOS2_1 disk) in the floppy  
drive and run INSTALL.  
3 In the NetWare Workstation for OS/2 Installation Utility window,  
click the Installation menu item and select the Requester on  
Workstation option.  
4 In the ‘Set Target Directory’ Windows, set the destination directory  
(default is c:\netware) and click OK.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
5 In the ‘Requester Installation’ window, select the the option ‘Edit  
CONFIG.SYS and copy all files’ and click OK.  
6 In the ‘Step 1- choose the ODI LAN Driver’ window, click on the  
list box to display the list of LAN drivers. An Installation Message  
window will appear. Put the Intel Network Drivers Disk in the  
floppy drive and click OK.  
7 In the list box, enter M32AODI.OS2 as the LAN driver to install,  
and click Continue.  
8 The Installation Message window will reappear. Re-insert the  
NetWare Client disk in the floppy drive (disk WSOS2_1) and click  
OK.  
9 Follow the onscreen instructions to complete the installation of the  
Netware Client for OS/2 software.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Installing Network Software  
Use the instructions under this heading in the following circumstances:  
To complete the installation of network software after you have run  
the Intel Installation Program: Find your network operating system in  
the alphabetical listing that follows.  
To install software for network operating systems not supported by  
the Intel Installation Program (for example, on systems running MS-  
DOS without Windows): Find your network operating system in the  
alphabetical listing that follows, or see the headings “Generic  
Installation” and “Manual Installation” in the same listing.  
To install and configure manually, without running the Intel  
Installation Program: See the heading “Manual Installation” in the  
alphabetical listing that follows.  
Use the Modified Intel Network Drivers Disk  
When prompted for a device driver or manufacturer’s disk by your  
network operating system install procedure, use Intel Network Drivers  
Disk.  
Alphabetical Reference  
The section is organized in alphabetical order by network operating  
system vendor. Unless otherwise indicated, these instructions are designed  
to be used with the Intel Installation Program. They assume a first-time  
installation of client software on a workstation, using the configuration  
values set by the Intel Installation Program or, when the Installation  
Program is not used, using the default values listed in Chapter 3,  
Configuration Reference.  
The PRO/100 CardBus adapter supports ODI, NDIS 2.01, NDIS 3 and  
packet drivers. To determine which of these drivers you need for your  
networking environment, consult your network administrator or network  
documentation.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Artisoft LANtastic version 6.0  
NDIS 2.0 Driver  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Artisoft LANtastic from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Run the Artisoft LANtastic 6.0 “install” program. Specify  
C:\LANTASTI as the destination directory (or the directory set with  
the Intel Installation Program).  
5
6
At the “Select network adapter” screen, choose “NDIS Support for  
Network Adapters.”  
When prompted for the “manufacturer’s driver disk” on the “Enter  
NDIS driver directory” screen, insert the Intel Network Drivers Disk.  
7
8
Complete the Artisoft installation.  
Reboot the computer and start LANtastic.  
AT&T StarGROUP LAN Manager version 2.1a  
NDIS 2.0 Driver  
See Microsoft LAN Manager.  
Banyan VINES version 5.5 & 6.0  
NDIS 2.0 Driver  
Prior to installing the Banyan Vines client software, it is necessary to  
determine the Interrupt Number for the PRO/100 CardBus adapter. After  
you have installed the Adapter, follow these steps to determine the  
Interrupt Number:  
1
2
Insert the Intel Network Drivers Disk in the floppy drive.  
At the DOS prompt, enter  
M32ATEST  
3
4
Press Enter.  
When the Main Menu opens, run Test.  
The IRQ number will be displayed when the Test is complete.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
5
Write down the IRQ number to use when you proceed with the  
installation.  
For example, if the IRQ=6, write down the number 6.  
Now continue with the Banyan Vines installation as follows:  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Banyan VINES from the Select Network Operating System  
screen.  
3
Follow the prompts to complete the Intel segment of the installation.  
The Installation Program also creates a \VINES directory on your hard  
disk.  
4
5
Copy the files from the VINES Master disk into the VINES directory.  
Copy the NDIS driver file and the PROTOCOL.INI file from \NDIS  
directory on the Network Drivers Disk into the VINES directory.  
6
7
Change to the VINES directory.  
Type PCCONFIG and select Network Card Settings, followed by  
NDIS Ethernet.  
8
9
Enter the IRQ value you wrote down in Step 5 of the M32ATEST  
procedure above.  
At the PROTOCOL.INI bindings prompt, type INTELNET.  
10 Press F10 to save and Esc to return to the main menu.  
11 Select Login Environment Settings, followed by Default  
Communications Driver, followed by NDIS Ethernet.  
12 Press Esc to return to the Main Menu and press F10 to save.  
13 Manually add these lines to your AUTOEXEC.BAT file:  
CD\VINES  
BAN  
14 Manually add these lines to your CONFIG.SYS file:  
DEVICE=C:\VINES\PROTMAN.DOS /I:C\VINES  
DEVICE=C:\VINES\M32ANDIS.EXE  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
DEC PATHWORKS versions 5.x or 6.x  
NDIS 2.0 Driver  
These instructions are based on PATHWORKS documentation for  
configuration of a PC as a client workstation, using a system service  
already installed on a LAN Manager server and the LAN Manager SETUP  
diskette.  
Prior to installing the DEC PATHWORKS client software, it is necessary  
to determine the Interrupt Number for the PRO/100 CardBus adapter.  
After you have installed the PRO/100 CardBus adapter, follow these steps  
to determine the Interrupt Number:  
1
2
Insert the Intel Network Drivers Disk in the floppy drive.  
At the DOS prompt, enter  
M32ATEST  
3
4
Press Enter.  
When the Main Menu opens, run Test.  
The IRQ number will be displayed when the Test is complete.  
5
Write down the IRQ number to use when you proceed with the  
installation.  
For example, if the IRQ=6, write down the number 6.  
Now continue with the DEC PATHWORKS installation as  
follows:  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose DEC PATHWORKS from the Select Network Operating  
System screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Check the README file on your PATHWORKS SETUP disk for  
requirements such as lastdrive, setver, etc. You will need 500 K of  
free conventional memory and about 1 MB of extended memory to  
run PATHWORKS SETUP. Be sure you have a lastdrive statement in  
your CONFIG.SYS file (lastdrive=g will work in most cases).  
5
Use a text editor to modify the file A:\NDIS\PI.TPL on the  
PATHWORKS SETUP disk, as follows (A:\NDIS is a hidden  
directory. You can access it by typing CD A:\NDIS):  
Change the line (remove the semicolon)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
;NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE]  
to read  
NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE]  
The NI_IRQ value must be the same as the interrupt value you will  
use for the Intel adapter.  
6
Run the SETUP program from the PATHWORKS SETUP disk for  
LAN Manager.  
7a For Pathworks 5.0, choose Configure PC.  
7b For Pathworks 6.0, select Yes for the “Has the Pathworks software  
been installed to a LAN Manager file Service.”  
8
9
In the Select Drive Window, choose “Network.”  
Select DECnet as transport.  
10 When prompted to choose a network adapter, choose “Other.”  
11 When prompted for driver information, in the “Other Adapter”  
window use the following:  
a. for PATHWORKS 5.0:  
NDIS DRIVER PATH: A:\  
NDIS DRIVER FILE: M32ANDIS.EXE  
NDIS DRIVER NAME: INTEL$  
b. for PATHWORKS 5.1:  
DRIVER FILE: A:\M32ANDIS.EXE  
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI  
c. for PATHWORKS 6.0:  
DRIVER FILE: A:\M32ANDIS.EXE  
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI  
Skip the Additional Files section.  
12 Insert the Intel Network Drivers Disk when prompted.  
13 Enter your node information when prompted.  
14 Save the PROTOCOL.INI file with the default settings.  
At this point, the SETUP program will try to connect to the DECnet  
server. Once connected, the SETUP program will map a logical drive  
to your system service.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
15 Highlight the logical drive mapped by the SETUP program, and press  
Enter to run PWSETUP.  
16 Press Enter to confirm the Software Destination C:\PW.  
17 Choose Express (or Custom if you have a lot of prior installation  
experience).  
18 Select an appropriate Workstation Template, or create one.  
19 Under Network Adapter Information, choose other network adapter,  
with NDIS enabled, and enter the following information:  
IN THE NON-SUPPORTED NETWORK ADAPTER WINDOW  
DRIVER FILE: A:\M32ANDIS.EXE  
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI  
Skip the Additional Files section and ensure Ethernet box is enabled.  
20 Insert the Intel Network Drivers Disk when prompted.  
21 In the Network Adapter Information window, select M32ANDIS  
Unsupported Network Adapter with NDIS Box enabled  
22 In LAN Manager System Service Connection Information window,  
enter username and press Enter.  
23 Enter the Windows directory path.  
24 Press Enter to add the STARTNET.BAT file to your  
AUTOEXEC.BAT file.  
25 A PROTOCOL.INI file created by SETUP will display in edit mode.  
a
Remove the semicolon at the beginning of the ni_irq line, as  
follows:  
Change the line  
;NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE]  
to read  
NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE]  
The ni_irq value must be the same as the interrupt value used for the Intel  
adapter.  
b
Verify that the [m32andis] section has the following lines and  
settings:  
[M32ANDIS]  
DRIVERNAME=INTEL$  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
26 Exit SETUP and reboot to start the network. (Some machines may  
require a cold boot at this point—power the computer down and back  
up again.)  
FTP Software LANWatch  
Packet and NDIS 2.0 Drivers  
FTP Software’s LANWatch network monitor software can be installed  
using Intel’s packet or NDIS 2.0 drivers. For information on which driver  
is appropriate for your network environment, refer to the FTP LANWatch  
documentation.  
FTP Software LANWatch Packet Driver Installation  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose FTP LANWatch from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install LANWatch according to the instructions in your FTP  
LANWatch manual.  
5
6
Copy the file M32APD.COM from the C:INTEL\M32A diretory to  
the directory where your LANWatch files are stored.  
(This step is not required for LANWatch versions 3.0 and later.)  
Using a text editor, add the following line to your CONFIG.SYS file:  
DEVICE = [PATH]IFCUST.SYS  
where [path] is the drive and directory where your LANWatch files  
are stored.  
7
8
Reboot the PC.  
Change to the directory of where your LANWatch files are stored and  
run M32APD.COM.  
9
Run LW.EXE.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
FTP Software LANWatch NDIS 2.0 Driver Installation  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose FTP LANWatch from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install LANWatch according to the instructions in your FTP  
LANWatch manual.  
5
Using a text editor, add the following lines to your CONFIG.SYS file:  
DEVICE = C:\NDIS\PROTMAN.SYS /I:C:\NDIS  
DEVICE = C:\NDIS\M32ANDIS.EXE  
DEVICE = C:\NDIS\DIS_PKT.GUP  
(Include the following line for LANWatch versions earlier than 3.0  
only)DEVICE = C:\LW\IFCUST.SYS  
6
Create a directory called NDIS on your hard disk, by typing:  
MD NDIS  
7
At the DOS prompt, copy M32ANDIS.EXE from the  
C:\INTEL\M32A directory on your hard disk and the file  
PROTOCOL.FTP from the \NDIS directory on the Intel Network  
Drivers Disk to the \NDIS directory you created in Step 6.  
8
9
Use a text editor to modify the PROTOCOL.FTP file to match the  
keywords and values in the sample PROTOCOL.INI file in the  
\INTEL\M32A directory.  
Copy all the files from the \NDIS directory on the FTP Unsupported  
Software Disk A to the \NDIS directory created in Step 6.  
10 Reboot the PC.  
11 Change to the \NDIS directory and run NETBIND.EXE.  
12 Run LW.EXE.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
FTP Software PC/TCP  
Packet, NDIS 2.0, and ODI Drivers  
FTP Software’s PC/TCP Generic Ethernet Kernel ETHDRV.EXE can be  
installed using Intel’s Packet, ODI, or NDIS drivers. PC/TCP can also be  
used concurrently with NetWare. For information on which driver is  
appropriate for your network environment, see the FTP PC/TCP  
documentation. For environments using values other than those set by the  
Intel Installation Program, see Chapter 3, Configuration Reference in  
this manual.  
FTP PC/TCP 3.X with OnNet 1.1 and Windows for  
Workgroups 3.11  
1
2
Run the Intel Installation Program from the Installation Disk.  
From the Select Network Operating System screen, choose Windows  
for Workgroups then FTP PC/TCP 3.x.  
3
4
5
Follow the prompts to complete the Intel segment of the installation.  
Run the PC/TCP installation program OnNet 1.1.  
Follow the prompts to the Network Card Screen, then select “Other  
NDIS Driver or Updated Packet Driver.”  
6
7
Insert the Intel Network Drivers Disk when prompted.  
Choose the appropriate driver then follow prompts to complete the  
installation.  
8a For NDIS installation, reboot the PC.  
8b For ODI installation, do not reboot. Continue with step 9.  
Additional Steps for ODI Installation  
If you are using an ODI driver, continue with the following steps:  
9
Change to the directory into which PC/TCP was installed.  
10 Use a text editor to change the file PCTCP.INI as follows:  
In the section PCTCP ifcust 0 change the line  
INTERFACE-TYPE=NDIS  
to read  
INTERFACE-TYPE=PKTDRV.  
11 Save the file and exit the text editor.  
12 Change to the C:\ (root) directory.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
13 Use a text editor to modify the AUTOEXEC.BAT file as follows  
(\PCTCP is the default installation directory):  
Move the line containing the STARTNET.BAT command or the  
lines containing the network driver files to immediately above the  
line  
SET PCTCP=C:\PCTCP\PCTCP.INI  
Add the line  
C:\PCTCP\ODIPKT  
after the line  
PCTCP=C:\PCTCP\PCTCP.INI  
14 Save the file and exit the text editor.  
15 Copy the file ODIPKT from disk 5 of the FTP PC/TCP installation  
disks to the directory into which PC/TCP was installed.  
16 Reboot the PC.FTP PC/TCP 3.X with OnNet 1.1 with Windows 3.1  
FTP PC/TCP 3.X with OnNet 1.1 with Windows 3.1  
1
2
Run the Intel Installation Program from the Installation Disk.  
From the Select Network Operating System screen, choose FTP PC/  
TCP.  
3
4
5
6
Follow the prompts to complete the Intel installation.  
Run the PC/TCP installation program OnNet 1.1.  
When prompted, insert the Intel Network Drivers Disk.  
Follow prompts to complete the PC/TCP installation.  
7a For an NDIS installation, reboot the PC.  
7b For ODI installation, do not reboot. Continue with step 8.  
Additional Steps for ODI Installation  
If you are using an ODI driver, continue with the following steps:  
8
9
Change to the directory into which PC/TCP was installed.  
Use a text editor to change the file PCTCP.INI as follows:  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
• In the section PCTCP ifcust 0 change the line  
INTERFACE-TYPE=NDIS  
to read  
INTERFACE-TYPE=PKTDRV.  
10 Save the file and exit the text editor.  
11 Change to the C:\ (root) directory.  
12 Use a text editor to modify the AUTOEXEC.BAT file as follows  
(\PCTCP is the default installation directory):  
Move the line containing the STARTNET.BAT command or the  
lines containing the network driver files to immediately above the  
line  
SET PCTCP=C:\PCTCP\PCTCP.INI  
Add the line  
C:\PCTCP\ODIPKT  
after the line  
PCTCP=C:\PCTCP\PCTCP.INI  
13 Save the file and exit the text editor.  
14 Copy the file ODIPKT from disk 5 of the FTP PC/TCP installation  
disks to the directory into which PC/TCP was installed.  
15 Reboot the PC.  
FTP Software PC/TCP Packet Driver Installation with  
OnNet 1.1  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose FTP PC/TCP from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Exit to DOS, switch to the C:\INTEL\M32A directory and run  
M32APD.COM.  
5
6
Install PC/TCP software according to the directions given in the PC/  
TCP documentation.  
Copy the file M32APD.COM from the C:\INTEL\M32A directory to  
the PC/TCP directory specified in the PC/TCP install procedure.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
7
8
Edit the AUTOEXEC.BAT file and add the following lines:  
C:\PCTCP\M32APD.COM  
C:\PCTCP\ETHDRV.EXE  
(This step is not required for PC/TCP versions 2.10 and later.) Using a  
text editor, add the following lines to your CONFIG.SYS file:  
DEVICE=[PATH]IPCUST.SYS  
DEVICE=[PATH]IFCUST.SYS  
where [path] is the drive and directory specified at the PC/TCP  
installation.  
9
Reboot the PC.  
10 Change to the directory where your PC/TCP files are stored and run  
M32APD.COM by typing: M32APD and pressing Enter.  
11 Run the ETHDRV.EXE kernel program supplied with PC/TCP. This  
loads the PC/TCP kernel into memory. The packet driver must always  
load before the kernel.  
12 Continue your server or workstation startup as instructed in the PC/  
TCP documentation.  
ODI with FTP Software PC/TCP and NetWare  
If you need to run Novell NetWare concurrently with FTP PC/TCP,  
proceed as follows:  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose FTP PC/TCP from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install PC/TCP according to the instructions in your FTP PC/TCP  
manual.  
5
(This step is not required for PC/TCP versions 2.10 and later.) Using a  
text editor, add the following lines to your CONFIG.SYS file:  
DEVICE=[PATH]IPCUST.SYS  
DEVICE=[PATH]IFCUST.SYS  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
where [path] is the drive and directory specified in the PC/TCP  
installation.  
6
7
Copy NET.CFG from the C:\INTEL\M32A directory and the files  
LSL.COM and M32AODI.COM from the root directory of the Intel  
Network Drivers Disk to the PC/TCP directory created in the PC/TCP  
install procedure.  
To start the workstation, load the software as follows:  
LSL  
M32AODI  
IPXODI  
ODIPKT (USE THE VERSION SUPPLIED WITH PC/TCP)  
ETHDRV  
VLM  
8
9
Change to the network drive (usually F:\LOGIN).  
Log in to the network.  
Generic Installation  
If your NOS is not listed in the Intel Installation Program, you can try  
selecting “Generic NDIS Driver” or “Generic ODI Driver” in the Intel  
Installation Program and clicking the Install button. A sample  
configuration file containing parameters optimized for your system will be  
created in the \INTEL\M32A directory on your hard disk. For NDIS, this  
will be a custom PROTOCOL.INI file. For ODI, it will be a custom  
NET.CFG file. Use this sample file to assist you in configuring the actual  
configuration file for your system (or use the sample file itself if  
appropriate).  
HP LAN Manager  
NDIS 2.0 Driver  
See Microsoft LAN Manager.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
IBM Local Area Network Support Program  
IBM Local Area Network Support Program (version  
1.36)  
NDIS 2.0 Driver  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose IBM LAN Support Program from the Select Network  
Operating System screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install the IBM Local Area Network Support Program according to  
the instructions in the IBM Local Area Network Support Program  
User’s Guide.  
5
Under Environment Information, respond “no” to the question “Do  
you have adapter option disks?”  
6
7
Choose the Intel CardBus adapter from the list provided.  
If prompted to do so, insert the Intel Network Drivers Disk when  
prompted and type the path  
A:\NDIS  
8
9
Press Esc twice to bypass error messages.  
Continue with the installation until finished.  
10 Use a text editor to add the following two lines in your CONFIG.SYS  
file at the location indicated by the “rem” statement concerning  
insertion of the driver name:  
DEVICE=\LSP\M32ANDIS.EXE  
11 Copy M32ANDIS.EXE from the directory C:\INTEL\M32A to the  
C:\LSP directory on your hard disk.  
12 Use a text editor to edit the PROTOCOL.INI keyword settings in the  
C:\LSP directory to match the keywords contained in the sample  
PROTOCOL.INI file located at C:\INTEL\M32A as required (unless  
you are using PRO/100 CardBus adapter default settings).  
13 Save the files and reboot the PC.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
IBM Local Area Network Support Program  
(version 1.2)  
NDIS 2.0 Driver  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose IBM LAN Support Program from the Select Network  
Operating System screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install the IBM Local Area Network Support Program according to  
the instructions in the IBM Local Area Network Support Program  
User’s Guide. The following instructions refer to the prompts and  
messages displayed with the Configuration Aid automated install  
software provided with the LAN Support Program.  
5
If a message appears during the LAN Support Program installation  
indicating there are no IBM LAN adapters installed in the  
workstation, bypass the message by pressing Enter.  
6
7
8
Answer [N]o to program support for the PC Network Adapter.  
Answer [Y]es to use of programs needing the NETBIOS interface.  
When prompted, select the Etherand Network family of network  
cards.  
9
Continue with the installation until finished.  
10 Use a text editor to replace the line in your CONFIG.SYS file that  
reads:  
DEVICE=\XX.DOS  
with the line  
DEVICE=\M32ANDIS.EXE  
11 Still in the CONFIG.SYS file, add the parameter O=N (where O is a  
letter, not zero) to the line  
DEVICE=\DXMT0MOD.SYS  
as follows  
DEVICE=\DXMT0MOD.SYS O=N  
12 Copy M32ANDIS.EXE from the directory C:\INTEL\M32A to the  
root directory of your hard disk or boot disk.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
13 Change to the LANMAN directory on your hard disk or boot disk.  
14 Use a text editor to modify the PROTOCOL.INI file in the C:\LSP  
directory as follows:  
• Under the ETHERAND section, change the line that reads  
BINDINGS = TCMAC2  
to read:  
BINDINGS = INTELNET  
• Underneath that section insert a new section that reads:  
[INTELNET]  
DRIVERNAME = INTEL$  
15 Use a text editor to edit the keyword settings in the PROTOCOL.INI  
file in the C:\LSP directory to match the keywords contained in the  
sample PROTOCOL.INI file located at C:\INTEL\M32A as required  
(unless you are using PRO/100 CardBus adapter default settings).  
16 Save the file and reboot the PC.  
IBM PC LAN and IBM DOS LAN Requester  
1
Install the IBM LAN Support Program according to the instructions  
under the heading “IBM Local Area Network Support Program,”  
which immediately precedes this one.  
2
3
Reboot the PC.  
Install IBM PC LAN or IBM DOS LAN Requester according to the  
instructions in the IBM documentation.  
4
Reboot the PC.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Manual Installation  
All network drivers provided on the Intel Network Drivers Disk can be  
installed manually, without the Intel Installation Program. You must copy  
the correct driver files to your hard disk and make appropriate changes to  
CONFIG.SYS, AUTOEXEC.BAT, and configuration files such as  
NET.CFG (for ODI) or PROTOCOL.INI (for NDIS). Manual installation  
should only be performed by a system administrator or someone with  
equivalent knowledge of the installation process for your network  
operating system.  
NOTE:  
For manual installation of Novell NetWare with VLM (available only under MS-  
DOS or Windows 3.x) you must first decompress the VLM files by running the  
MS-DOS batch file DCOMPVLM.BAT from the Network Drivers Disk, as follows:  
DCOMPVLM [PATH]  
where [path] is the directory for NetWare files (usually C:NWCLIENT).  
DCOMPVLM will decompress and copy all required files to the designated direc-  
tory.  
For an overview of the installation process, see the instructions provided  
for your network operating system i the alphabetical section of this  
chapter. Consult Chapter 3, Configuration Reference, for detailed  
information on configuration files and settings. For additional information,  
consult your network operating system documentation.  
Microsoft LAN Manager  
Microsoft LAN Manager (version 2.1)  
NDIS 2.0 Driver  
1
2
Run the Intel Installation Program fromt he Installation Disk.  
Choose Microsoft LAN Manager from the Select Network Operating  
System screen.  
3
4
5
Follow the prompts to complete the Intel segment of the installation.  
Begin installation of LAN Manager using “setup.”  
When prompted to select the available network adapter driver, choose  
“Other Driver.”  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
6
7
When prompted, insert the Intel Network Drivers Disk.  
Select “Intel EtherExpress PRO/100 Mobile CardBus 32” from the  
menu.  
8
9
Continue with the installation until it is completed.  
If installing Microsoft LAN Manager to run under Windows proceed  
to step 10. Otherwise, skip to step 15.  
10 Run Windows.  
11 Choose setup from “Main” group.  
12 Select Startup, and under the “Options” screen select Change System  
Settings.  
13 Select Network then scroll to LAN Manager version 2.1.  
14 Follow the prompts to complete the installation.  
15 Reboot the PC.  
Microsoft LAN Manager (version 2.1) with Windows  
for Workgroups 3.11  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Windows for Workgroups from the Select Network Operating  
System screen.  
3
4
5
6
Select “Yes” on the Attached to Network File Server screen.  
Select Microsoft LAN Manager.  
Follow the prompts to complete the Intel segment of the installation.  
Start Windows and, in the Network program group, double-click on  
the Network Setup icon.  
7
If you have not installed network support, choose Networks in the  
Network Setup dialog box, select Install Windows Network, and click  
OK. Otherwise proceed with step 8.  
8
9
In the Network Setup dialog box, choose Drivers.  
In the Network Drivers dialog box, choose Add Adapter.  
10 In the Add Network Adapter box, choose Unlisted or Updated  
Network Adapter and click OK.  
11 When prompted for an “unlisted, updated, or vendor-provided  
network driver disk,” insert the Intel Network Drivers Disk.  
12 Select “Intel M32A NDIS 2.01 Real Mode,” and click OK.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
13 Close the Network Drivers dialog box and click OK in the Network  
Setup box.  
14 Complete the installation process, inserting the Intel Network Drivers  
Disk if required.  
15 Continue with the installation until it is completed.  
16 Click on the Control Panel in the “Main” group.  
17 Select Startup from the Control Panel.  
18 In the Options for Enterprise Networking window click “Log on to  
Windows NT or LAN Manager Domain.”  
19 Save, exit, and reboot the PC.  
Windows for Workgroups  
NDIS 2.01 and ODI Drivers  
Instructions are provided for installing Intel network drivers for the first  
time on a system using Windows for Workgroups version 3.11 alone or  
with NetWare. These instructions assume that Windows for Workgroups  
has already been installed. Remove any earlier version of the Intel drivers  
before installing the new version. No NDIS 3 driver is supplied for  
Windows for Workgroups.  
The following topics are covered for Windows for Workgroups:  
How to install for Windows for Workgroups version 3.11 and  
NetWare using the ODI driver  
How to install for Windows for Workgroups 3.11 using the NDIS 2.0  
driver  
How to Disable Windows for Workgroups Networking  
For troubleshooting tips for Windows for Workgroups, see Chapter 4,  
Troubleshooting.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
Windows for Workgroups Version 3.11 and NetWare  
(Using the ODI driver)  
1
To configure Windows for Workgroups with NetWare, run the Intel  
Installation Program and choose Windows for Workgroups.  
2
3
4
5
Choose YES to “Connect to Network Server.”  
Choose “Novell NetWare” as your network server.  
When the installation is complete, reboot the computer.  
At the Intel menu, choose “Load EtherExpress PRO/100 Mobile  
CardBus 32 for Network Access.”  
6
7
From the DOS prompt, run the NetWare Client install. Be sure to  
install support for Windows.  
When the Novell Client install program asks for an ODI driver, insert  
the Intel Network Drivers Disk.  
8
9
Complete the installation process and reboot the computer.  
Log in to NetWare.  
10 Start Windows for Workgroups and, in the Network program group,  
double-click on the Network Setup icon.  
Windows for Workgroups Network Setup will detect the NetWare  
configuration and automatically select Novell NetWare as an  
additional network. It will also prompt for Novell support files (from  
Novell Client diskettes) if required during the installation. (If  
necessary, use the Novell decompression utility to decompress the  
required files.)  
Windows for Workgroups Setup will also attempt to determine what  
NetWare driver model you are using. If for some reason Windows for  
Workgroups was unable to detect the driver model, you should select  
IPXODI and LSL as the driver type.  
Note that you can install NetWare as an additional network under  
Windows for Workgroups, as follows:  
11 In the Network Setup dialog box, choose Networks.  
12 To install both Windows for Workgroups and NetWare, choose  
Install Windows Network.  
13 Choose Other under Additional Network Support, then select the  
NetWare configuration appropriate for your network.  
14 If you want to share your files or printers with others, select  
“Sharing.”  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
15 In the Network Setup dialog box, choose Drivers.  
16 In the Network Drivers dialog box, choose Add Adapter.  
17 In the Add Network Adapter box, choose Unlisted or Updated  
Network Adapter and click OK.  
18 When prompted for an “unlisted, updated, or vendor-provided  
network driver disk,” insert the Intel Network Drivers Disk and click  
OK.  
19 Select “Intel EtherExpress PRO/100 Mobile CardBus 32” and click  
OK.  
20 Close the Network Drivers dialog box and click OK in the Network  
Setup box.  
21 Complete the installation process, inserting the Intel Network Drivers  
Disk if required.  
22 Reboot the computer.  
NOTE:  
Verify that the following lines have been added to your AUTOEXEC.BAT and  
STARTNET.BAT files. If they are not there, add them manually using a text edi-  
tor.  
Add the following command to the AUTOEXEC.BAT file, where \WINDOWS is the  
directory into which Windows was installed:  
C:\WINDOWS\NET START  
Add the following command to the STARTNET.BAT file in your NWCLIENT direc-  
tory, where \WINDOWS is the directory into which Windows was installed:  
C:\WINDOWS\ODIHLP.EXE  
Windows for Workgroups 3.11 Using the NDIS 2.0  
Driver  
1
2
Run the Intel Installation Program from Disk 1, Installation Disk.  
Choose Windows for Workgroups installation from the Select  
Network Operating System screen.  
3
4
5
Choose “No” on the Attached to Network File Server screen.  
Follow the prompts to complete the Intel segment of the installation.  
Start Windows for Workgroups and double-click on the Network  
Setup icon in the Network Group.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
6
If you have not installed network support, choose Networks in the  
Network Setup dialog box, select Install Windows Network, and click  
OK. Otherwise proceed to Step 7. Click the Sharing button to share  
files and printers.  
7
8
9
In the Network Setup dialog box, choose Drivers.  
In the Network Drivers dialog box, choose Add Adapter.  
In the Add Network Adapter box, choose Unlisted or Updated  
Network Adapter and click OK.  
10 When prompted for an “unlisted, updated, or vendor-provided  
network driver disk,” insert the Intel Network Drivers Disk.  
11 Select “Intel M32A NDIS 2.01 Real Mode” and click OK.  
12 Close the Network Drivers dialog box and click OK in the Network  
Setup box.  
13 Complete the installation process, inserting the Intel Network Drivers  
Disk if required.  
How to Remove an Existing Windows for  
Workgroups Installation  
1
Start Windows and select Network Setup in the Network program  
group.  
2
3
In the Network Setup dialog box, choose Drivers.  
In the Network Drivers dialog box, choose Remove to discard any  
existing network adapter drivers.  
4
5
6
Choose Close and return to the Network Setup dialog box.  
Exit the Network Setup program and exit Windows.  
At the DOS prompt, change to the Windows system directory, as  
follows  
CD \WINDOWS\SYSTEM  
7
8
Make a directory called OEM, as follows  
MKDIR OEM  
Type  
DIR OEM?.INF  
to see a list of driver configuration files.  
9
Use the DOS EDIT program to view each OEM file to determine  
which ones reference Intel.  
10 Copy the old Intel configuration files to the OEM directory.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
11 Delete the old Intel configuration files from the Windows system  
directory.  
12 Restart Windows.  
13 Follow the instructions for installing drivers for Windows for  
Workgroups alone or Windows for Workgroups and NetWare.  
Novell NetWare  
ODI Driver  
The Intel ODI driver allows for the concurrent use of Novell NetWare and  
other protocols that support Novell’s Open Data-Link Interface (ODI)  
specification.  
NetWare  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Novell NetWare from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the installation.  
The Intel Installation Program will reboot the computer and verify the  
NetWare connection.  
5
Log in to the network.  
NOTE:  
The Intel Installation Program uses the NetWare VLM shell to connect to your  
NetWare server. The Installation Program decompresses and copies all the  
required files.  
If you are installing manually, without the Intel Installation Program (under MS-  
DOS or Windows 3.x) you must first decompress the VLM files by running the  
MS-DOS batch file DCOMPVLM.BAT from the Network Drivers Disk, as follows:  
DCOMPVLM [PATH]  
where [path] is the directory for NetWare files (usually C:\NWCLIENT).  
DCOMPVLM will decompress and copy all required files to the designated direc-  
tory.  
If you need NETX shell support, contact your System Administrator.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
SunSoft PC-NFS (version 3.5)  
NDIS 2.0 Driver  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose SunSoft PC-NFS from the Select Network Operating System  
screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install PC-NFS for Ethernet according to instructions in the PC-NFS  
documentation. Choose NDIS setup, and follow the instructions to  
complete the setup. Note the prompt that tells you that further manual  
modifications will have to be made.  
5
6
Reboot the computer. You will see some error messages. Disregard  
them and continue with these instructions.  
Rename the file PROTOCOL.NFS in the C:\LANMAN directory to  
PROTOCOL.INI. Use a text editor to edit the PROTOCOL.INI file as  
follows:  
Replace the items  
[YOUR-MAC-MODULE]  
DRIVERNAME = YOURMAC$  
OPTION1 = VALUE1 ETC.  
[NFS-NDIS]  
DRIVERNAME = NFSLINK1  
BINDINGS = YOUR-MAC-MODULE  
with  
[INTELNET]  
DRIVERNAME = INTEL$  
[NFS-NDIS]  
DRIVERNAME = NFSLINK$  
BINDINGS = INTELNET  
7
8
Copy M32ANDIS.EXE from the C:\INTEL\M32A directory to the  
C:\LANMAN directory.  
Use a text editor to insert the following lines in your CONFIG.SYS  
file:  
DEVICE=C:\LANMAN\M32ANDIS.EXE  
between the two lines  
DEVICE=C:\LANMAN\PROTMAN.SYS  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
DEVICE=C:\LANMAN\NFS-NDIS.SYS  
as follows:  
DEVICE=C:\LANMAN\PROTMAN.SYS  
DEVICE=C:\LANMAN\M32ANDIS.EXE  
DEVICE=C:\LANMAN\NFS-NDIS.SYS  
9
Verify that your AUTOEXEC.BAT file contains a line that reads  
C:\LANMAN\NETBIND  
before the line that reads  
NET INIT  
10 Configure PC-NFS options according to your PC-NFS documentation,  
and reboot the computer.  
Novell NetWare 32-bit ODI Drivers  
Installing the Client 32 Driver under Windows 3.x and  
DOS  
In order to install the Client 32 driver under Windows 3.x or DOS, the  
following software is needed:  
· PRO/100 CardBus adapter Network Drivers Disk  
· NetWare Client 32 for DOS/Win 3.1x disks from Novell  
Installing under DOS  
1 Put the NetWare Client 32 install disk in drive A.  
2 Type a:\install and press enter.  
3 Select the products you want to install.  
4 Follow the onscreen instructions  
5 At the Select a LAN Driver screen, select User Specified LAN  
Driver  
6 Insert the Intel Network Drivers Disk in drive A  
7 Type A: and press enter.  
8 Select Intel EtherExpress PRO/100 CardBus Adapter  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
9 A screen will display the default settings for the driver. Most of the  
time, these settings do not need to be changed. Check the  
README.TXT for machine specific settings.  
10 To complete installation, follow the onscreen instructions.  
Installing under Windows 3.x  
1 Select File, Run, and type a:\setup  
2 Follow the onscreen instructions  
3 When the ODI Driver Selection Dialog box appears, select User  
Specified Driver and click Next.  
4 When prompted, insert the Intel Network Drivers Disk in drive A:  
5 Select the driver a:\m32a.lan  
6 To complete installation, follow the onscreen instructions.  
Installing under Windows 95  
Refer to the instructions on page 16.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Ungermann-Bass Net/One for DOS  
NDIS 2.0 Driver  
The PRO/100 CardBus adapter is supported on Ungermann-Bass Net/One  
LAN Manager and MS-NET networks. There are two NDIS driver  
packages available from UB: XNS BNS/NDIS and TCP BNS/NDIS. These  
packages, used with a Intel NDIS driver, provide files that support DOS  
workstations. They are available from UB and authorized UB  
representatives.  
Ungermann-Bass Net/One LAN Manager version 2.1  
Installation  
1
2
Begin installation of LAN Manager 2.1 using “setup.”  
When prompted to select the available network adapter driver, choose  
“Other Driver.”  
3
4
When prompted, insert the Intel Network Drivers Disk.  
Select “Intel EtherExpress PRO/100 Mobile CardBus 32” from the  
menu.  
5
6
Continue with the installation until it is completed.  
Following the UB instructions, modify your CONFIG.SYS file by  
adding the following lines:  
For DOS:  
DEVICE = [PATH]M32ANDIS.EXE  
where [path] is the drive and directory in which you installed your  
network operating system.  
7
Use a text editor to modify your PROTOCOL.INI file as follows:  
For each protocol that you want to bind, set the protocol  
definition area of the PROTOCOL.INI file to:  
BINDINGS = UBLOOP  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
At the end of the file, add the following fragments:  
[UBLOOP]  
DRIVERNAME = UBLOOP$  
BINDINGS = INTELNET  
;INTEL ADAPTER  
[INTELNET]  
DRIVERNAME = INTEL$  
8
Reboot the PC.  
Wollongong PathWay Access for DOS  
NDIS and ODI Drivers  
Wollongong PathWay Access for DOS can be installed using Intel NDIS  
or ODI drivers. Installation instructions for both types of driver are  
provided below. For information on which driver is appropriate for your  
network environment, refer to the Wollongong PathWay Access for DOS  
documentation.  
Wollongong PathWay NDIS Installation  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Wollongong PathWay Access from the Select Network  
Operating System screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install PathWay Access for DOS Kernel and Drivers programs  
according to the instructions in the PathWay Access for DOS manual.  
Before rebooting the PC, continue with the following steps.  
5
Use a text editor to modify the CONFIG.SYS file. After the statement  
that reads  
DEVICE=C:\PATHWAY\PWTCP.SYS  
add the lines  
DEVICE=\PATHWAY\[PROTMAN FILE] /I:C:\PATHWAY  
DEVICE=\PATHWAY\M32ANDIS.EXE  
where [PROTMAN FILE] is equal to the PROTMAN2.EXE or  
PROTMAN.EXE file that is located in your PATHWAY directory.  
(Refer to the Wollongong PathWay Access for DOS manual for  
information regarding the differences between these two files.)  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
6
7
8
Copy the file M32ANDIS.EXE from C:\INTEL\M32A directory to  
the PATHWAY directory on your hard disk or boot disk.  
Continue with the “custom” instructions in the PathWay Access for  
DOS manual.  
Reboot the PC.  
Wollongong PathWay ODI Installation  
1
2
Run the Intel Installation Program from the Installation Disk.  
Choose Wollongong PathWay Access from the Select Network  
Operating System screen.  
3
4
Follow the prompts to complete the Intel segment of the installation.  
Install PathWay Access for DOS Kernel and Drivers programs  
according to the instructions in the PathWay Access for DOS manual.  
Before rebooting the PC, perform the following steps.  
5
6
Run the MS-DOS batch file DCOMPVLM.BAT from the Network  
Drivers Disk, as follows:  
DCOMPVLM PATHWAY  
DCOMPVLM.BAT will decompress and copy all required files from  
the Intel Network Drivers Disk to the PATHWAY directory on your  
hard disk or boot disk. (The files are LSL.COM, M32AODI.COM,  
IPXODI.COM, VLM.EXE, and NET.CFG.)  
Change to the PATHWAY directory and load the software in the  
following order:  
LSL  
M32AODI  
IPXODI (ONLY IF USING NOVELL NETWARE)  
VLM  
(ONLY IF USING NOVELL NETWARE)  
7
8
Load the Wollongong file ODI.EXE.  
Continue with the instructions in the PathWay Access for DOS  
manual.  
9
Reboot the PC.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER2  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Configuration Reference  
Who Should Consult This Chapter?  
This chapter contains additional information on PRO/100 CardBus adapter  
features and technical information on configuration requirements, including  
sample configuration files. You can use this information to modify an  
existing installation or perform a new installation manually without the  
assistance of the Intel Installation Program.  
If You Installed with the Intel Installation Program  
The file modifications made by the Intel Installation Program should allow  
most PC users to log on to their network after performing the steps outlined  
in Chapter 1, Hardware Installation and Chapter 2, Software  
Installation.  
If you followed those instructions and still have not been able to  
successfully log on to your the network, you may need to modify the  
configuration parameters set by the Intel Installation Program. You can  
modify configuration settings by re-running the Intel Installation Program  
or by running IEDIT, the Intel System File Editor installed in the Intel  
Mobile Windows program group.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
For Installation without the Intel Installation Program  
The information in this chapter can be used to manually configure the  
PRO/100 CardBus adapter. For manual installation, it is assumed that you  
have some experience with manual setup of network adapters, and know  
how to access and modify configuration files, using an ASCII text editor.  
Intel recommends that manual installation be performed by a system  
administrator or equivalent.  
Special Features  
Card and Socket Services  
The Personal Computer Memory Card International Association (PCMCIA)  
has developed specifications governing the use of PC Cards (formerly  
PCMCIA cards) in personal computer systems. The software components  
that implement these specifications are called Card and Socket Services.  
This software supports the ability of PC Card-aware device drivers (known  
as clients) to share cards, sockets, and system resources.  
The PCMCIA has recently developed specifications for a new generation of  
32-bit PC Cards, called CardBus. Since CardBus is new, support for  
CardBus has not yet been implemented in Card and Socket Services,  
although development is underway. To use Card and Socket Services with  
the PRO/100 CardBus adapter, the Card and Socket Services must support  
CardBus.  
At press time, Intel had tested the following Card and Socket Services with  
the PRO/100 adapter:  
Product/Operating System  
Manufacturer  
CardWizard v. 5.3/DOS/Windows 3.x  
Phoenix Card Manager 95 v. 4.0  
SystemSoft Corp.  
Phoenix Technologies Ltd.  
Intel is also working with the following vendors and products to ensure  
compatibility as they become available:  
CardWare v. 5.0/Windows NT  
Award Software  
International Inc.  
CardWorks v. 5.3/Windows 95 (OSR2)  
CardWizard v. 3.0/Windows NT  
Card Executive/Windows NT  
SystemSoft Corp.  
SystemSoft Corp.  
Phoenix Technologies Ltd.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
As additional vendors add CardBus support to Card and Socket Services,  
new driver software from Intel may be required to use the Intel CardBus  
Adapter with Card and Socket Services. Review the README.TXT file  
and check the Intel website for the latest information.  
Check with the vendor who supplied your Card and Socket Services to  
determine if it supports CardBus. If your Card and Socket Services do not  
support CardBus, the remainder of this section does not apply.  
NOTE:  
Microsoft Windows 95 and Windows NT have card handling functionality built-in  
and do not require separate Card and Socket Services software.  
However, the first two releases of Windows 95 (versions 4.00.950 and 4.00.950a)  
did not include support for CardBus in Card and Socket Services. Windows 95  
Release OSR2 (also referred to as version 4.00.950b) includes CardBus support.  
See the Windows 95 Installation section at the beginning of Chapter 2 for addi-  
tional details.  
If you are using the OSR2 version of Windows 95, the information in this section is  
applicable. Windows NT 3.51 and 4.0 do not implement native CardBus support.  
Please refer to the Windows NT Installation section at the beginning of Chapter 2  
for additional information.  
Finally, review the README.TXT file or the Intel website for the latest information  
on support for CardBus under various operating systems and Card and Socket  
Services.  
If you are using the version of Windows 95 that supports CardBus, you can  
take advantage of the full range and benefits of PC Card capability. If you  
are not using that version of Windows 95, the features following the note  
may not be supported.  
NOTE:  
For DOS and Windows 3.1 systems, the Intel PRO/100 CardBus driver may be able  
to co-exist with older Card and Socket Services, even though the Card and Socket  
Services do not directly support CardBus. Consult the installation instructions in  
Chapter 2 and README.TXT file for more details.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
HotSwap  
The PRO/100 CardBus adapter currently supports HotSwap during  
connection to a network or host computer from a CardBus computer only if  
you are running versions of Windows 95 or Windows NT that fully support  
CardBus. This feature allows the CardBus to be removed from the  
computer, temporarily replaced with another type of card such as a modem  
or memory card, then reinserted without loss of network connection.  
For example, a user could replace a PRO/100 CardBus adapter connected to  
a network with a PC Card flash or SRAM memory card. The network drives  
become temporarily inaccessible. Any access from DOS or Windows will  
return an “Invalid drive specification” message. Meanwhile, the drive  
associated with the flash or SRAM card is available for copying and data  
retrieval.  
If the PRO/100 CardBus is returned to the PC Card slot within the timeout  
period specified by the network operating system, then network drives,  
path, and mappings will be reinstated exactly as they were before the swap.  
The default timeout value varies for different network operating systems.  
On NetWare 3.11, for example, the default setting is 15 minutes and is  
modifiable only by the network administrator. If the 15 minute limit is  
exceeded, the network connection can usually be restored by simply  
logging back in without rebooting.  
NOTE:  
The HotSwap feature is not supported unless Card and Socket Services software (or  
its equivalent under Windows 95 or Windows NT) supports CardBus and is running  
on the PC Card computer. Upgrading to new drivers from Intel may also be re-  
quired, as new Card and Socket software is released.  
Power Management Suspend/Resume  
Power management features such as suspend/resume are supported by the  
PRO/100 CardBus adapter on PC Card systems running both Card and  
Socket Services (or the equivalent functionality of Windows 95 or  
Windows NT) that support CardBus. This means that when the computer  
enters a reduced power or power saving mode, an ongoing network  
connection will remain active for the period of time allowed by the network  
operating system. Even if the time period is exceeded, the network  
connection can usually be restored by simply logging back in without  
rebooting.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
NOTE:  
The suspend/resume feature is not supported unless Card and Socket Services  
software (or its equivalent under Windows 95 or Windows NT) supports CardBus  
and is running on the PC Card computer.  
Power Management Guidelines  
HotSwap and suspend/resume operations are subject to limitations dictated  
by the network operating system. See the documentation for your network  
operating system to determine how long the network will wait for activity  
before dropping a connection, and whether this time period is user  
configurable.  
Full-Duplex Transmission  
The PRO/100 CardBus adapter hardware and network drivers are designed  
to support full-duplex operation, or the ability to transmit and receive on the  
network at the same time. This feature is only available when the Adapter is  
connected to full-duplex switches.  
If your network supports full-duplex operation, activate the CardBus feature  
by including the keyword LINEMODE=FULL in the configuration file or  
on the command line for your network driver.  
NOTE:  
To use full-duplex capabilities, your network must have full-duplex hardware in  
place and enabled. If you use the LINEMODE=FULL keyword without full-duplex  
hardware, the network will become unusable due to excessive collisions.  
Advanced Look-Ahead Pipelining  
The PRO/100 CardBus adapter also uses pipelining technology to improve  
performance. Advanced Look-Ahead Pipelining allows for processing and  
transmission of packets before the entire packet has been loaded into  
memory, resulting in significant gains in performance. This feature is  
enabled automatically, without user intervention.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
Memory Exclusion  
When using a memory manager (under DOS and Windows 3.X), you must  
exclude a 4K memory range between C000 and EF00 for the use of the  
PRO/100 CardBus adapter. For example:  
DEVICE=C:\DOS\HIMEM.SYS  
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF  
This example excludes 4K of the D200 segment for use by the PRO/100  
CardBus adapter. If the CardBus software is not configured for a specific  
address, it will automatically detect a free memory range. Otherwise, be  
sure the CardBus software is set to the same memory window that is  
excluded.  
Sample Configuration Files for Selected Network  
Operating Systems  
The following sample configuration files show default parameters for some  
network operating systems. This information is designed to supplement the  
information provided in Chapter 2, Software Installation.  
Artisoft LANtastic/AI 6.0  
NOTE:  
If you are using DOS multi-menu CONFIG.SYS, the three LANtastic-related lines in  
the CONFIG.SYS will be located in a COMMON section at the end of your  
CONFIG.SYS. You will have to manually move those lines into the proper  
menuitem section of your CONFIG.SYS. The same is true for the line call  
c:\lantasti\startnet.bat in your AUTOEXEC.BAT file.  
Sample CONFIG.SYS  
device=c:\dos\himem.sys  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW  
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF  
REM DEVICE=C:\DOS\EMM386.EXE NOEMS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
FILES=50  
BUFFERS=30  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW  
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI  
DEVICE=C:\LANTASTI\M32ANDIS.EXE  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
Sample AUTOEXEC.BAT  
PATH=C:\UTIL;C:\DOS;  
PROMPT $P$G  
CALL C:\LANTASTI\STARTNET.BAT  
Sample PROTOCOL.INI  
;PROTOCOL.INI FOR LANTASTIC VERSION 6.00  
;—————— USING INTEL ETHEREXPRESS PRO/100 32-BIT  
;MOBILE ADAPTER  
;
[PROTMAN]  
DRIVERNAME = PROTMAN$  
DYNAMIC = YES  
; PROTOCOL.INI SECTION FOR THE INTEL ETHEREXPRESS  
;PRO/100 32-BIT MOBILE ADAPTER.  
[M32ANDIS_NIF]  
DRIVERNAME = INTEL$  
NOEARLYRX  
Sample STARTNET.BAT  
@ECHO OFF  
REM LANTASTIC VERSION 6.00 INSTALLED 95/01/26  
11:31:28  
REM (FOR DOS)  
C:  
CD C:\LANTASTI  
SET LAN_CFG=C:\LANTASTI  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
REM IF LANTASTIC IS DISABLED, SKIP EVERYTHING.  
IF EXIST DISABLED GOTO :STARTNET_DONE  
@ECHO ===== BEGIN LANTASTIC CONFIGURATION =====  
PATH C:\LANTASTI;%PATH%  
SET LAN_DIR=C:\LANTASTI.NET  
LOADHIGH AI-NDIS BIND_TO=M32ANDIS_NIF  
AILANBIO @STARTNET.CFG  
REDIR T4700 @STARTNET.CFG  
IF EXIST NOSHARE GOTO :NOSHARE  
SERVER C:\LANTASTI.NET @STARTNET.CFG  
NET LOGIN \\T4700  
GOTO :CONTINUE  
:NOSHARE  
@ECHO LANTASTIC SERVER WAS INSTALLED BUT TURNED  
OFF.  
:CONTINUE  
REM IF CONNECT.BAT EXISTS, RUN IT TO SET UP  
CONNECTIONS.  
IF EXIST CONNECT.BAT GOTO :CONNECT  
REM OTHERWISE SET UP CONNECTIONS SPECIFIED DURING  
INSTALL.  
NET USE LPT1: \\T4700\@PRINTER  
NET LPT TIMEOUT 10  
GOTO :CONNECT_DONE  
:CONNECT  
@ECHO SETTING UP LANTASTIC CONNECTIONS FROM  
CONNECT.BAT  
REM BUILD CONNECT.BAT LIKE THIS: “NET SHOW/BATCH  
>C:\LANTASTI\CONNECT.BAT”  
REM (OR RUN THE BATCH FILE SETNET.BAT)  
CALL CONNECT.BAT  
:CONNECT_DONE  
NET POSTBOX  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
@ECHO ===== END LANTASTIC CONFIGURATION =====  
:STARTNET_DONE  
CD \  
Banyan VINES  
NOTE:  
If you are using DOS Multi-menu CONFIG.SYS, the three VINES related lines in the  
CONFIG.SYS will be located at the end of your CONFIG.SYS. You will have to  
manually move those lines into the proper menuitem section of your CONFIG.SYS.  
If you are getting Banyan VINES Error codes 10xx, check your  
C:\VINES\NDISBAN.DOC for explanations of error codes.  
Sample CONFIG.SYS  
DEVICE=C:\DOS\HIMEM.SYS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW (EMM)  
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF  
REM DEVICE=C:\DOS\EMM386.EXE NOEMS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
FILES=40  
BUFFERS=30  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW (NDIS)  
DEVICE=C:\VINES\PROTMAN.DOS /I:C:\VINES  
DEVICE=C:\VINES\M32ANDIS.EXE  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
Sample AUTOEXEC.BAT  
PATH=C:\UTIL;C:\DOS;  
PROMPT $P$G  
CD\VINES  
BAN  
Sample PROTOCOL.INI  
; PROTOCOL.INI SECTION FOR THE INTEL ETHEREXPRESS  
;PRO/100 32-BIT MOBILE ADAPTER.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
[INTELNET]  
DRIVERNAME = INTEL$  
DEC PATHWORKS 5.0 and 5.1  
Sample CONFIG.SYS  
DEVICE=C:\DOS\HIMEM.SYS  
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF  
FILES=40  
BUFFERS=30  
SHELL=C:\DOS\COMMAND.COM /P /E:1024  
LASTDRIVE=G  
Sample AUTOEXEC.BAT  
CD\PW  
STARTNET.BAT  
Sample PROTOCOL.INI (after completion of install  
process)  
[PROTOCOL MANAGER]  
DRIVERNAME = PROTMAN$  
[IPX4MAC]  
DRIVER = IPX$MAC  
BINDINGS = M32ANDIS  
[IPX_XIF]  
DRIVERNAME = IPX$  
BINDINGS = M32ANDIS  
[NETBEUI]  
DRIVERNAME = NETBEUI$  
SESSIONS = 6  
NCBS  
= 12  
BINDINGS = M32ANDIS  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
LANABASE = 0  
[DATALINK]  
DRIVERNAME = DLL$MAC  
LG_BUFFERS = 14  
SM_BUFFERS = 6  
OUTSTANDING = 32  
BINDINGS = M32ANDIS  
DECPARM = C:\PW\  
IRQ = 5  
;; YOUR DECNET ADDRESS IS AA0004008407  
;;  
[M32ANDIS]  
DRIVERNAME=INTEL$  
Windows for Workgroups 3.11  
Sample CONFIG.SYS  
DEVICE=C:\DOS\HIMEM.SYS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW  
(EMM)  
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF  
REM DEVICE=C:\DOS\EMM386.EXE NOEMS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
FILES=40  
BUFFERS=30  
DEVICE=C:\WINDOWS\IFSHLP.SYS  
LASTDRIVE=Z  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
Sample AUTOEXEC.BAT  
C:\WINDOWS\NET START  
Sample PROTOCOL.INI  
[NETWORK.SETUP]  
VERSION=0X3110  
NETCARD=M32AMAC,1,M32AMAC,1  
TRANSPORT=MS$NETBEUI,NETBEUI  
TRANSPORT=MS$NDISHLP,MS$NDISHLP  
LANA0=M32AMAC,1,MS$NETBEUI  
LANA1=M32AMAC,1,MS$NDISHLP  
[NETBEUI]  
BINDINGS=M32AMAC,ASYMAC  
LANABASE=0  
DRIVERNAME=NETBEUI$  
SESSIONS=10  
NCBS=12  
[PROTMAN]  
DRIVERNAME=PROTMAN$  
PRIORITY=MS$NDISHLP  
[M32AMAC]  
DRIVERNAME=INTEL$  
[MS$NDISHLP]  
DRIVERNAME=NDISHLP$  
BINDINGS=M32AMAC  
Sample [NETWORK DRIVERS] SECTION IN SYSTEM.INI  
[NETWORK DRIVERS]  
DEVDIR=C:\WINDOWS  
LOADRMDRIVERS=YES  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
NETCARD=M32ANDIS.EXE  
TRANSPORT=*NETBEUI,NDISHLP.SYS  
Windows for Workgroups Using the ODI Driver  
with NetWare as Secondary Network  
Sample STARTNET.BAT  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW  
:M32A_MENU  
@ECHO OFF  
CLS  
GOTO %CONFIG%  
:M32A_E_INTEL  
C:  
CD C:\NWCLIENT  
IF NOT EXIST M32AODI.COM GOTO M32A_ERROR  
LSL  
M32AODI.COM  
IPXODI  
C:\WINDOWS\ODIHLP.EXE  
VLM  
IF NOT EXIST ICHECK.EXE GOTO S_M32A_INTEL  
CLS  
ICHECK.EXE -E -1 F:  
:S_M32A_INTEL  
F:  
LOGIN  
GOTO M32A_END  
:M32A_ERROR  
ECHO ERROR: UNABLE TO LOCATE DRIVER FILE.  
:M32A_END  
C:  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
CD \  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE  
Sample CONFIG.SYS  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
BELOW (MENU)  
[MENU]  
MENUITEM=M32A_E_INTEL,LOAD INTEL  
ETHEREXPRESS PRO/100 32-BIT MOBILE ADAPTER  
FOR NETWORK ACCESS  
MENUITEM=M32A_END,DO NOT LOAD ANY INTEL  
DRIVERS  
MENUCOLOR=15,0  
[M32A_E_INTEL]  
[M32A_END]  
[COMMON]  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
ABOVE  
DEVICE=C:\WINDOWS\HIMEM.SYS /TESTMEM:OFF  
DEVICE=C:\DOS\EMM386.EXE X=D000-DFFF  
DOS=HIGH  
DOS=UMB  
BUFFERS=20  
FILES=40  
LASTDRIVE=Z  
DEVICE=C:\WINDOWS\IFSHLP.SYS  
STACKS=9,256  
Sample AUTOEXEC.BAT  
@ECHO OFF  
PROMPT $P$G  
PATH C:\WINDOWS;C:\DOS  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
SET TEMP=C:\DOS  
C:\DOS\SMARTDRV.EXE /X C+  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
BELOW  
:M32A_MENU  
@ECHO OFF  
CLS  
GOTO %CONFIG%  
:M32A_E_INTEL  
C:\WINDOWS\NET START  
C:  
CD C:\NWCLIENT  
IF NOT EXIST C:\NWCLIENT\STARTNET.BAT GOTO  
M32A_ERROR  
CALL C:\NWCLIENT\STARTNET.BAT  
GOTO M32A_END  
:M32A_ERROR  
ECHO ERROR: UNABLE TO LOCATE DRIVER FILE.  
:M32A_END  
C:  
CD \  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
ABOVE  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
BELOW (PATH)  
PATH=%PATH%;C:\NWCLIENT  
REM INTEL PRO/100 CB — DO NOT CHANGE LINES  
ABOVE  
Sample PROTOCOL.INI  
[NETWORK.SETUP]  
VERSION=0X3110  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
NETCARD=M32A$ODI,1,M32A$ODI,4  
TRANSPORT=MS$NWLINKNB,NWLINK  
TRANSPORT=MS$NETBEUI,NETBEUI  
LANA0=M32A$ODI,1,MS$NETBEUI  
LANA1=M32A$ODI,1,MS$NWLINKNB  
[NET.CFG]  
PATH=C:\NWCLIENT\NET.CFG  
[M32A$ODI]  
[LINK DRIVER M32AODI]  
DATA=FRAME ETHERNET_802.2  
[NWLINK]  
BINDINGS=M32AODI  
[NETBEUI]  
BINDINGS=M32AODI  
LANABASE=0  
SESSIONS=10  
NCBS=12  
Sample [network drivers] section in SYSTEM.INI  
[NETWORK DRIVERS]  
DEVDIR=C:\WINDOWS  
LOADRMDRIVERS=NO  
Sample NET.CFG file (located C:\NWCLIENT)  
LINK DRIVER M32AODI  
FRAME ETHERNET_802.3  
FRAME ETHERNET_802.2  
FRAME ETHERNET_II  
FRAME ETHERNET_SNAP  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
Driver Parameters Reference  
The following paragraphs present configuration guidelines for each of the  
driver types: NDIS2 and NDIS3, ODI, and packet. These guidelines are  
followed by a comprehensive “keyword” reference section.  
All of the drivers described here automatically detect the speed of the  
network to which the adapter is attached (10 Mbps or 100 Mbps), unless  
otherwise noted. Speed can also be specified with the LINESPEED  
keyword.  
Full-duplex operation must be explicitly configured with the LINEMODE  
keyword, unless the adapter is being connected to a hub which supports  
Nway* auto-negotiation. In this case the adapter will auto-detect full-  
duplex operation.  
All of the DOS drivers have enhanced resource detection capability built in.  
The drivers will detect free system memory, IRQ, and I/O resources for use  
by the drivers. To use this feature, do not force a particular resource by  
placing a keyword in the network configuration file. This will override the  
automatic resource detection for that parameter.  
ODI Settings (for driver M32AODI.COM and  
M32AODI.OS2)  
Custom parameters for networks using the ODI driver can be entered  
manually, using an ASCII editor, in the NET.CFG file.  
DOS ODI Driver Configuration Notes (M32AODI.COM)  
The ODI driver M32AODI.COM conforms to the “Novell ODI  
Specification: 16-bit DOS Client HSMs.” It is a DOS-based terminate-and-  
stay-resident (TSR) program. The driver will configure itself according to  
the options specified in the NET.CFG file. This file is supplied on the  
Network Drivers Disk and must be present in the same directory as the ODI  
driver. Files required for using M32AODI.COM are  
M32AODI.INS  
NET.CFG  
Intel installation information file  
Network configuration file  
Intel ODI driver  
M32AODI.COM  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
Most installations will be able to use the settings implemented in the  
NET.CFG file by the Intel Installation Program. If any parameters need to  
be changed, use an ASCII text editor to open and modify the NET.CFG file  
and insert the appropriate keywords and values after the line  
LINK DRIVER M32AODI  
Parameters can also be implemented on the command line. Command line  
parameters override parameters placed in the NET.CFG file.  
NET.CFG Example  
LINK DRIVER M32AODI  
FRAME ETHERNET_802.2  
M32AODI.COM Keywords  
KEYWORD  
MEMORY  
IOADDRESS  
IRQ  
DEFAULT  
AUTO  
VALID VALUES  
C000 - EF00  
100 - FF80  
3-15  
AUTO  
AUTO  
SOCKET  
MODE  
AUTO  
1-4  
MEM  
IO OR MEM  
NOCHECK  
NOT PRESENT  
NOT PRESENT  
2
NOLED  
TXBUFFERSIZE  
RXBUFFERSIZE  
ERT  
1 - 10  
15  
1 - 30  
HIGH  
LOW, MED, OR HIGH  
NOEARLYRX  
NOEARLYTX  
LINESPEED  
LINEMODE  
LINKDISABLE  
NOBURST  
NOT PRESENT  
NOT PRESENT  
AUTO  
10 OR 100  
AUTO  
HALF OR FULL  
NOT PRESENT  
NOT PRESENT  
32  
LATENCY  
0 - 255  
CACHE  
8
0, 4, 8, 16, 32  
NOWRITEPOST  
NOT PRESENT  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
NOPREFETCH  
NOT PRESENT  
S
U
(COMMAND LINE ONLY: SHOW  
RESIDENT LAN DRIVERS)  
(COMMAND LINE ONLY: UNLOAD)  
OS/2 ODI Driver Configuration Notes (CBEODI.OS2)  
The OS/2 ODI driver M32AODI.OS2 conforms to the Novell "ODI  
Developer's Guide for OS/2 Client Driver Hardware Specific Modules"  
version 2.1. It is an IBM OS/2-based device driver for use with OS/2  
versions 2.0 and later. The Novell OS/2 workstation ODI stack including  
M32AODI.OS2 supports Novell's NetWare Requester for OS/2 networking  
client environment.  
Files required for using M32AODI.OS2 include Novell OS/2 Requester  
files and the following files:  
NET.CFG  
Network configuration file  
Intel ODI driver for OS/2  
M32AODI.OS2  
Most installations will be able to use the settings implemented in the  
NET.CFG file by the Intel Installation Program. If any parameters need to  
be changed, use an ASCII text editor to open and modify the NET.CFG file  
and insert the appropriate keywords and values after the line  
LINK DRIVER M32AODI  
NDIS 2.0.1 Settings (for drivers M32ANDIS.EXE  
and M32ANDIS.OS2)  
Custom parameters for the NDIS driver can be entered manually, using an  
ASCII editor, in the PROTOCOL.INI file.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
NDIS 2.0.1 DOS Driver Configuration Notes  
The DOS NDIS driver M32ANDIS.EXE conforms to the 3Com/Microsoft  
LAN Manager Network Driver Interface Specification (NDIS) version  
2.0.1. It is a DOS-based executable terminate-and-stay-resident (TSR)  
program that will configure itself according to the options specified in the  
PROTOCOL.INI file, which is supplied on the Network Drivers Disk.  
The files required for using M32ANDIS.EXE are:  
PROTOCOL.INI  
M32ADOS.NIF  
Configuration and binding information file  
Intel installation file for Microsoft LAN  
Manager  
M32ANDIS.EXE  
Intel DOS NDIS 2.0.1 driver  
NDIS 2.0.1 OS/2 Driver Configuration Notes  
The OS/2 NDIS driver M32ANDIS.OS2 conforms to the 3Com/Microsoft  
LAN Manager Network Driver Interface Specification (NDIS) version  
2.0.1. It is an IBM OS/2-based device driver for use with OS/2 versions 2.0  
and later.  
The files required for using M32ANDIS.OS2 are:  
PROTOCOL.INI  
M32AOS2.NIF  
Configuration and binding informa tion file  
Intel installation file for Microsoft LAN  
Manager  
M32ANDIS.OS2  
Intel OS/2 NDIS 2.0.1 driver  
If any parameters need to be changed, use an ASCII text editor to modify  
the PROTOCOL.INI file with the appropriate keywords and values.  
Keyword syntax for PROTOCOL.INI can be found below. Keywords are  
not case sensitive, and can be abbreviated to a unique sequence of initial  
characters (for example, IN for INTERRUPT, IO for IOADDRESS). A  
Keyword Alphabetical Reference follows the keyword listings.  
Most installations will be able to use the settings implemented in the  
PROTOCOL.INI file by the Intel Installation Program. If any parameters  
need to be changed, use an ASCII text editor to modify the  
PROTOCOL.INI file with the appropriate keywords and values.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
NDIS 2.0.1 Keywords (M32ANDIS.EXE and  
M32ANDIS.OS2)  
KEYWORD  
DEFAULT  
VALID VALUES  
DRIVERNAME=INTEL$ (REQUIRED FIRST ITEM IN  
PROTOCOL.INI)  
MEMORY  
IOADDRESS  
IRQ  
AUTO  
AUTO  
AUTO  
AUTO  
C000 - EF00  
100 - FF80  
3 - 15  
SOCKET  
1 - 4  
MODE  
MEM  
IO OR MEM  
NOCHECK  
NOT PRESENT  
NOLED  
NOT PRESENT  
TXBUFFERSIZE  
RXBUFFERSIZE  
ERT  
2
1 - 10  
1 - 30  
15  
HIGH  
LOW, MEDIUM,  
HIGH  
NOEARLYRX  
NOEARLYTX  
LINESPEED  
LINEMODE  
LINKDISABLE  
NOBURST  
NOT PRESENT  
NOT PRESENT  
AUTO  
10 OR 100  
AUTO  
HALF OR FULL  
NOT PRESENT  
NOT PRESENT  
32  
LATENCY  
0
- 255  
CACHE  
32  
0, 4, 8, 16,  
OR 32  
NOWRITEPOST  
NOPREFETCH  
VERBOSE  
NOT PRESENT  
NOT PRESENT  
NOT PRESENT  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
M32A.SYS (NDIS 3) Settings for Microsoft  
Windows NT and Windows 95  
M32A.SYS is an NDIS 3 Miniport driver. It conforms to the Microsoft  
Network Driver Interface Specification (NDIS). It supports both Windows  
NT and Windows 95.  
Windows NT Support  
The M32A.SYS driver supports the networking environment in Microsoft  
Windows NT versions 3.51 and greater.  
The files necessary for using M32A.SYS include:  
M32A.DLL  
Intel M32A installation DLL  
OEMSETNT.INF  
Intel installation file for Microsoft  
Windows NT  
M32A.SYS  
Intel NDIS 3 driver for Microsoft  
Windows NT  
There are user-configurable parameters to the M32A.SYS driver which can  
be modified using the Network Control Panel built into Windows NT. This  
applet uses the OEMSETNT.INF file to set the corresponding parameters in  
the registry.  
The user-configurable parameters are as follows:  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
Parameter  
Default  
Valid Values  
Registry  
Value  
I/O PORT  
0XF800 0X1000-0XF800 SAME  
0XD4000 0XC0000-0XDF000 SAME  
MEMORY ADDRESS  
INTERRUPT  
5
3, 4, 5, 7,  
10, 11, 15  
AUTO DETECT  
SAME  
INTERRUPT STYLE 0  
0
1
2
PCI IRQS  
ISA IRQS  
LINE SPEED  
0
1
0
AUTODETECT  
0
1
2
0
1
2
0
1
2
3
O
1
2
0
1
10 MB  
100 MB  
LINE MODE  
AUTODETECT  
HALF-DUPLEX  
FULL-DUPLEX  
PC CARD SOCKET  
AUTODETECT  
1
2
3
DIRECT ENABLE  
0
AUTODETECT  
OFF  
ON  
EARLYTRANSMIT  
EARLYRECEIVE  
1
1
OFF  
ON  
OFF  
ON  
O
1
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
The network node address can be modified by manually editing the registry  
and adding the parameter ‘NetworkAddress’ with a hexadecimal string  
value, such as ‘00A0C9112233’. If the user does NOT specify a  
‘NetworkAddress’ then the M32A.SYS driver uses the network node  
address contained in the PRO/100 CardBus adapter Card Information  
Structure.  
Windows 95 Support  
The M32A.SYS driver also supports the networking environment in  
Microsoft Windows 95.  
The files necessary for using M32A.SYS with Windows 95 include:  
NETM32A.INF  
M32A.SYS  
Intel installation file for Windows 95  
Intel NDIS 3 driver for Windows 95  
There are user-configurable parameters to the M32A.SYS driver which can  
be modified using the Network Control Panel built into Windows 95. This  
applet queries the user for parameter selections and then sets the  
corresponding parameters in the registry. The user-configurable parameters  
are as follows:  
Parameter  
Value  
Default Valid Values  
Registry  
DIRECTENABLE  
EARLYTRANSMIT  
LINESPEED  
AUTODETECT OFF, ON,  
AUTODETCT 0  
ON  
OFF  
ON  
0
1
AUTO  
AUTO DETECT 0  
10 MBPS  
1
2
100 MBPS  
LINEMODE  
0
0
AUTODETCT 0  
HALF-DUPLEX 1  
FULL-DUPLEX 2  
AUTODETECT 0  
INTERRUPTSYTLE  
PCI-IRQ  
ISA-IRQ  
1
2
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
SOCKET  
0
AUTODETECT 0  
1
2
3
4
1
2
3
4
The network node address can be modified by specifying a value for  
‘NetworkAddress’ such as ‘00A0C9112233’. If the user does NOT specify  
a ‘NetworkAddress’ then the M32A.SYS driver uses the network node  
address contained in the PRO/100 CardBus adapter Card Information  
Structure.  
Novell Client 32 Driver Settings (for driver M32A.LAN)  
The driver M32A.LAN conforms to the Novell “ODI NetWare Server  
Driver Development Tool Kit Driver Specification” version 3.3. It is a 32-  
bit driver. This driver can be used as a server driver in NetWare versions  
3.12, 4.10, and 4.11. For NetWare 3.12 and 4.10, server NLMs must be  
updated to the 3.3 specification. The new NLMs can be obtained from  
Novell.  
Novell Client32 Driver Keywords  
Parameters for configuring the Novell server driver must be specified  
on the command line.  
Keyword  
Default  
AUTO  
AUTO  
AUTO  
AUTO  
MEM  
Valid Values  
C000 - FFFFE000  
100 - FF80  
3 - 15  
MEMORY  
IOADDRESS  
IRQ  
SOCKET  
1 - 4  
MODE  
IO or MEM  
NOLED  
NOT PRESENT  
10  
TXBUFFERSIZE  
RXBUFFERSIZE  
1 - 100  
1 - 100  
30  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
ERT  
HIGH  
LOW, MEDIUM, or  
HIGH  
NOEARLYRX  
NOEARLYTX  
LINESPEED  
LINEMODE  
LINKDISABLE  
NOBURST  
NOT PRESENT  
NOT PRESENT  
AUTO  
10 or 100  
HALF  
HALF or FULL  
NOT PRESENT  
NOT PRESENT  
32  
LATENCY  
0 - 255  
CACHE  
32  
0, 4, 8, 16, or 32  
NOWRITEPOST  
NOPREFETCH  
NOT PRESENT  
NOT PRESENT  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
Packet Driver Settings (for driver  
M32APD.COM)  
Packet driver parameters must be stated on the M32APD.COM command  
line when running the packet driver.  
Packet Driver Configuration Notes  
The Intel packet driver M32APD.COM conforms to FTP Software’s public  
domain packet-driver specification. It is a DOS-based terminate-and-stay-  
resident (TSR) program. The driver file M32APD.COM is located in the  
\PKTDRV directory on the Network Drivers Disk.  
Refer to your network documentation for instructions on how to install the  
packet driver with your network. Most installations should be able to use  
the default settings listed below.  
Keywords are not case sensitive, and can be abbreviated to a unique  
sequence of initial characters (for example, IN for INTERRUPT).  
Packet Driver Keywords  
Keyword  
MEMORY  
Default  
AUTO  
Valid Values  
C000 - EF00  
100 - FF80  
IOADDRESS  
IRQ  
AUTO  
AUTO  
3
- 15  
SOCKET  
AUTO  
1 - 4  
MODE  
MEM  
IO OR MEM  
NOCHECK  
NOLED  
NOT PRESENT  
NOT PRESENT  
2
TXBUFFERSIZE  
RXBUFFERSIZE  
ERT  
1
1
- 10  
- 30  
15  
HIGH  
LOW, MEDIUM, OR HIGH  
NOEARLYRX  
NOEARLYTX  
LINESPEED  
NOT PRESENT  
NOT PRESENT  
AUTO  
10 OR 100  
LINEMODE  
HALF  
HALF OR FULL  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
LINKDISABLE  
NOBURST  
NOT PRESENT  
NOT PRESENT  
32  
LATENCY  
0
- 255  
CACHE  
32  
0, 4, 8, 16, OR 32  
NOWRITEPOST  
NOPREFETCH  
SINT  
NOT PRESENT  
NOT PRESENT  
60  
(60 - 80)  
VERBOSE  
NOT PRESENT  
Packet Driver Example  
A typical sequence for loading the packet driver M32APD.COM and  
default configuration settings is as follows:  
M32APD  
ETHDRV  
If no default configuration settings are used, these must be stated on the  
M32APD.COM command line. For example,  
M32APD IOADDRESS=320 INT=7  
ETHDRV  
Diagnostic Test Utility Settings (M32ATEST.EXE)  
The M32ATEST.EXE utility is a Intel utility for testing Intel adapter  
hardware. It is an MS-DOS executable file.  
M32ATEST.EXE tests the adapter hardware functionality, including the PC  
Card interface, the serial EEPROM, the Ethernet controller, and the PHY  
interface (adapter modules). It displays manufacturing information  
including serial number and date and time of manufacture. It also displays  
configuration information including interrupt, I/O address, and starting  
memory location used.  
M32ATEST.EXE is an interactive program. It does not take command line  
parameters. Parameters can be modified and tested through the user  
interface in the program. See the Troubleshooting section for more  
information about this utility.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
Keyword Alphabetical Reference  
?
displays command summary for driver  
CACHE  
sets the system cache line size on the CardBus  
Bridge. Valid arguments are system dependent  
and may include only 0 (cache disabled), 4, 8,  
16, or 32. Changing this parameter may affect  
network performance.  
DIRECTENABLE  
For 32-bit NDIS3 Driver (M32A.SYS) only:  
DIRECTENABLE forces the method used by the  
driver to determine if a PRO/100 CardBus  
adapter is present. Valid parameters are  
AutoDetect, Off, and On. Using AutoDetect  
allows the driver to determine if the CardBus  
bridge has already been setup by another enabler  
such as a Socket and Card Services. If so, the  
driver will use the current configuration. Using  
On, forces the driver to enable the CardBus  
bridge without checking its current state.  
DRIVERNAME=INTEL$ required as first item in the INTEL section of the  
PROTOCOL.INI file for the M32ANDIS driver.  
ERT  
specifies the Advanced Look-ahead Pipelining  
threshold. Valid settings are LOW, MEDIUM,  
and HIGH. Changing this value will affect  
network performance, depending on the  
computer system.  
INT  
See IRQ.  
See IRQ.  
INTERRUPT  
INTERRUPTSTYLE  
For 32-bit NDIS3 Driver (M32A.SYS) only:  
INTERRUPTSTYLE forces the driver to use  
ISA IRQ routing or PCI IRQ routing. Some  
CardBus bridges have the capability of  
supporting both PCI and ISA style IRQ routing.  
Valid parameters are AutoDetect, PCI-IRQ,  
and ISA-IRQ. The default keyword is  
AutoDetect.  
IOADDRESS and  
IOBASEADDRESS specifies the base I/O address of the Intel adapter  
I/O ports, in hexadecimal notation. The PRO/100  
CardBus adapter requires 128 contiguous I/O  
addresses if run in I/O mode. If using memory-  
mapped I/O mode, no I/O ports are necessary. If  
this parameter is not specified the driver will  
detect an I/O port automatically.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
I/O PORT  
IRQ  
see IOADDRESS  
specifies a hardware interrupt for use by the  
adapter. If the computer system uses PCI  
interrupts on the CardBus Bridge, this parameter  
is ignored (unless the ISAIRQ keyword is used  
as an override). If this parameter is not specified  
the driver will detect an IRQ automatically.  
ISAIRQ  
use this keyword to force the driver to use ISA  
IRQ routing. Some CardBus bridges have the  
capability of supporting both PCI and ISA style  
IRQ routing. The driver automatically  
determines the best choice for this option unless  
this keyword is used as an override.  
LATENCY  
specifies the latency timer for the CardBus  
Bridge. This parameter affects the bus mastering  
capabilities of the PRO/100 CardBus adapter.  
Changing this parameter may affect system  
performance. The range is a decimal number  
between 1 and 255. The default is 32. The  
default is 32. The latency should be lowered if  
more than one peripheral device, such as a  
modem, is being used. If the PRO/100 CardBus  
adapter is the only peripheral being used, use a  
higher latency, such as 255.  
LINEMODE  
For 16-bit DOS Drivers: LINEMODE selects  
either half-duplex or full-duplex mode for the  
network. Valid parameters are AUTO, HALF or  
FULL. Selecting full-duplex enables the  
PRO/100 CardBus adapter to send and receive  
data simultaneously when connected to a full-  
duplex hub. Default is AUTO.  
For 32-bit NDIS3 Driver (M32A.SYS):  
LINEMODE selects either half-duplex or full-  
duplex mode for the network. Valid parameters  
are AutoDetect, Half Duplex, and Full-Duplex.  
Selecting full-duplex enables the PRO/100  
CardBus adapter to send and receive data  
simultaneously when connected to a full-duplex  
switch. Default is keyword is AutoDetect.  
LINESPEED  
For 16-bit DOS Drivers: LINESPEED forces  
operation to 10 or 100 Mbps. If the keyword is  
not present the line speed will be automatically  
detected (default).  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
For 32-bit NDIS3 Driver (M32A.SYS):  
LINESPEED forces operation to 10 or 100  
Mbps. Valid parameters are AutoDetect, 10  
Mbps, and 100 Mbps. Default keyword is  
AutoDetect.  
LINKDISABLE  
disables link integrity for non-IEEE 10BASE-T  
networks such as StarLAN 10. Without this  
keyword in the driver command line, the driver  
defaults to link integrity ENABLED.  
MEM  
see MEMORY.  
MEMORY  
specifies the host PC memory location for the  
Intel adapter in hexadecimal notation, when  
MODE MEMORY (memory-mapped I/O) is  
being used (see MODE). The memory block  
occupies 4 Kbytes of host memory.  
MODE  
set this keyword to IO to disable requests for  
memory-mapped mode on systems that only  
support an I/O-driven card. The MEMORY  
setting provides increased performance on  
computers that allow simultaneous availability of  
memory and I/O resources.  
NETWORKADDRESS allows user to override adapter’s unique network  
node address by specifying a different node  
address.  
NOBURST  
NOCHECK  
disables burst mode reads on the PRO/100  
CardBus adapter. Using this keyword will force  
the adapter to initiate a bus-master request for  
each read, negatively impacting performance.  
disables verification of adapter resources. If the  
driver detection and verification code is causing  
problems when loading, this keyword can be  
used to turn the feature off.  
NODEADDRESS  
NOEARLYRX  
see NETWORKADDRESS.  
disables Advanced Look-ahead Pipelining  
features of the adapter. This keyword may be  
used to troubleshoot systems that have  
inexplicable network problems. Using this  
keyword may negatively impact performance.  
NOEARLYTX  
disables early transmit capability of the Adapter.  
This keyword may be used to troubleshoot  
systems that have inexplicable network  
problems. Using this keyword may negatively  
impact performance.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
NOLED  
turns off LED indicators on LAN adapter  
module to conserve power.  
NOPREFETCH  
disables prefetching in memory-mapped I/O  
mode by turning off this capability on the  
CardBus bridge. Using this keyword may  
negatively impact performance.  
PCIIRQ  
use this keyword to force the driver to use PCI  
IRQ routing. Some CardBus bridges have the  
capability of supporting both PCI and ISA style  
IRQ routing. The driver automatically  
determines the best choice for this option unless  
this keyword is used as an override.  
PORT  
(ODI) see IOADDRESS.  
RXBUFFERSIZE  
sets the size of the adapter receive packet buffer.  
This is a number in decimal in the range 1 - 30  
for 16-bit drivers and 1 - 100 for the 32-bit ODI  
driver. Each packet adds approximately 1520  
bytes to the resident size of the driver. The  
default is 15 packets.  
S
(ODI)(MS-DOS command line only) displays  
LAN drivers resident in memory.  
SINT  
(Packet Driver) is a number from hexadecimal  
60 to 80 designating a software interrupt. Default  
is 60.  
SOCKET  
For 16-bit DOS Drivers: identifies the number  
of the host computer’s PC Card slot or socket  
into which the PRO/100 CardBus adapter is  
inserted. If a socket number is specified, only the  
specified socket is checked for the Intel adapter.  
If no socket is specified, all sockets are searched  
until the Intel adapter is found.  
For 32-bit NDIS3 Driver (M32A.SYS):  
identifies the number of the host computer's PC  
slot or socket into which the PRO/100 CardBus  
adapter is inserted. Valid parameters are  
AutoDetect, 1, 2, 3, and 4. If a socket number is  
specified, only the specified socket is checked  
for the Intel adapter. The default keyword is  
AutoDetect, and the driver will then  
automatically check all slots for the PRO/100  
CardBus adapter.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuration Reference  
TXBUFFERSIZE  
sets the size of the adapter transmit packet  
buffer. This is the number of transmit packets in  
decimal in the range 1 - 10 for 16-bit drivers and  
1 - 100 for the 32-bit ODI driver. Each packet  
adds approximately 1520 bytes to the resident  
size of the driver. The default is 2 packets.  
U
(ODI)(MS-DOS command line only) unloads  
driver from memory.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER3  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Troubleshooting  
This chapter contains troubleshooting information covering the most  
common issues encountered when installing the PRO/100 CardBus adapter,  
based on information developed by Intel Customer Support. This  
information is intended for users or network administrators who are already  
familiar with the PRO/100 CardBus adapter and its user documentation, and  
who have run into difficulties after having completed the installation  
procedures for the adapter, as described in the preceding chapters of this  
User’s Guide.  
This chapter contains the following headings:  
LED Indicators  
Diagnostic Test  
Error Messages  
General Troubleshooting  
Network Operating System Troubleshooting (Artisoft LANtastic,  
DEC PATHWORKS, Microsoft Windows 95, Microsoft  
Windows for Workgroups, Novell NetWare)  
Troubleshooting Checklist  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Additional Sources of Information  
In addition to this User’s Guide, your computer and network documentation  
should also be consulted as needed. For the latest information on the PRO/  
100 CardBus adapter, see the README file on the Intel Network Drivers  
Disk, call the Intel BBS (see attached Support Page File), or visit the Intel  
World Wide Web site at http://support.intel.com. See Appendix A in this  
User’s Guide for Intel support services access information.  
LED Indicators  
The LED indicators on the PRO/100 CardBus adapter TPE connector  
operate under the following conditions: (1) the card is inserted into a PC  
Card slot and (2) connected to the network, (3) computer is powered on,  
and (4) network driver has been loaded.  
Link Integrity  
Transmission  
Orange - 100 Mbps  
Activity - Yellow  
Green - 10 Mbps  
PRO/100 CardBus adapter TPE connector and LEDs  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Diagnostic Self Test (MS-DOS only)  
Intel provides a DOS-based self test diagnostics program. This program,  
located on the PRO/100 CardBus adapter Network Drivers Disk, tests  
several PRO/100 CardBus adapter functions. It also reports test results, the  
serial number of the unit, and the node address. M32ATEST can only be  
run from an MS-DOS command line.  
This utility is intended to be a diagnostic tool in troubleshooting PRO/100  
CardBus adapter configuration errors. It is designed to be simple to use and  
understand, yet provide valuable technical information. The program can  
run without a PRO/100 CardBus adapter, or even a CardBus machine, and  
still provide some functionality. The program is dynamic. This means cards  
can be inserted and removed at any time. Multiple cards can be tested and  
different configurations can be tested. M32ATEST.EXE can run in a DOS  
box in Windows, or Windows 95.  
Executing the Self Test  
Use the following steps to execute the self test.  
1
Install the PRO/100 CardBus adapter according to the instructions  
contained in Chapter 1, Hardware Installation in this User’s  
Guide.  
2
Start your computer from DOS. DO NOT load a network driver.  
NOTE:  
Do not run M32ATEST with a network driver loaded. Loading a network driver  
before running M32ATEST may cause unpredictable results when exiting the test  
utility.  
3
Run the diagnostic test by typing M32ATEST at the MS-DOS  
prompt, then press Enter. For example,  
M32ATEST  
NOTE:  
If an error message displays when you execute the self test, see “ Error Messages”  
later in this chapter.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Main Screen  
The program consists of several function “buttons” and a view pane.  
Pressing or invoking a function will bring up the corresponding screen in  
the view pane. This view remains until another is selected. To exit  
M32ATEST type 'x' or push the 'Exit' button.  
When a function is active, the button appears to remain down or pushed.  
Once the button pops up, the function is completed and the screen is a  
passive results display.  
There are nine functions which can be invoked by pushing the associated  
button on the main screen. A button can be pushed by pressing the  
highlighted letter indicated on the button, or by using the left mouse button.  
Each function is explained below.  
TEST  
This function uses the current configuration to initialize the adapter and  
verify it is powered on and properly seated in its slot. It displays the current  
setting and test result for each parameter. Parameters are configured  
through the CONFIGURE function described below. If a card is detected  
and initialized successfully, the CIS information is displayed.  
A failure may indicate that service is required for the PRO/100 CardBus  
adapter. Contact Intel Customer Support.  
The CIS section displays the model and serial numbers of the unit, its  
manufacturing date and time, and its network node address. This data has  
been preprogrammed at the factory and cannot be altered.  
Important  
Write down the PRO/100 CardBus adapter model and serial numbers for reference  
Customer Support will ask you to supply the model and serial numbers when  
requesting technical assistance or warranty service from Intel.  
CONFIGURE  
This function allows the user to set the parameters used for testing. The  
address mode can be set to Auto, Memory, or I/O. For Memory and I/O a  
hexadecimal address can be specified. The IRQ can be set to Auto, or IRQ.  
The IRQ selection can be used to force a particular interrupt, and a specific  
type of interrupt (PCI or ISA). The network line speed and line mode can  
also be set from this function.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
SOFTWARE  
This function attempts to determine what software is currently loaded  
which will affect the operation of the card. It displays the current version of  
DOS and Windows, and any Card and Socket Services available.  
HARDWARE  
This function attempts to determine if a CardBus Controller exists on the  
machine. It first checks for PCI BIOS extensions, and then it searches for  
any CardBus Controllers. If found it displays the vendor information and  
the PCI interrupt (if enabled by the BIOS)  
NETWORK  
This function enables the card on the Ethernet network and performs some  
diagnostics. It reports the operating mode and speed detected and monitors  
the network for traffic. Network traffic is shown on a graph. This graph  
provides a visual representation of the volume of traffic on the local area  
network (LAN). The Receive Statistics window displays the cumulative  
totals for received packets, KBytes, and Errors.  
RESOURCES  
This function attempts to determine free resources which can be utilized by  
the driver. It searches for memory, I/O, and IRQ.  
ADVANCED  
This function allows the user to setup advanced diagnostics.  
ABOUT  
This function displays the current version of the program.  
HELP  
This function displays the help screen.  
EXIT  
This function exits the application.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Error Messages  
Except as noted, these messages are specific to the Intel PRO/100 CardBus  
adapter. They are listed in strict numerical/alphabetical order, i.e., numbers  
appear before letters and messages starting with “The” are under the letter  
T, initial “A” or “An” under the letter A.  
For an explanation of other messages that may appear on the screen, see the  
network-specific or computer-specific troubleshooting later in this chapter,  
as well as your computer and network operating system documentation.  
A card was not detected in the selected slot.  
The SOCKET keyword was used to force a particular slot, but no PRO/100  
CardBus adapter was detected there.  
A CardBus interface could not be found.  
The driver was unable to detect a CardBus bridge. Some machines require  
that the CardBus Bridge be enabled through the system BIOS. Check with  
the laptop manufacturer to find out how to enable the CardBus Bridge.  
A PCI IRQ could not be set, and none exists for this slot  
If the PCIIRQ keyword has been used to force PCI IRQ routing, but the  
IRQ keyword has not been set, this message may occur if the driver cannot  
set or verify an interrupt through the PCI BIOS. This keyword effectively  
disables the ISA IRQ routing capability of the driver.  
A working IRQ could not be found  
The resource detection could not find a usable IRQ. Either the system has  
no available IRQ resources, or the available IRQ resources could not be  
configured for the CardBus Bridge.  
A PRO/100 CardBus adapter could not be found  
The driver was able to detect a CardBus Bridge, but there was no Intel  
PRO/100 CardBus adapter inserted into a slot.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
No free memory segment was found  
The resource selection in the driver was unable to find a 4KByte block of  
memory available for the driver's use. Check to ensure that a 4KByte block  
of memory is excluded from any memory managers present. If the error  
persists, use the MEMORY keyword to force a known address that's  
available, and use the NOCHECK keyword to disable resource verification.  
No network cable was detected. Line speed will be detected at run  
time  
A network cable was not detected, or a cable fault occurred. The driver was  
unable to determine the speed of the network and will attempt to detect the  
correct speed as soon as a network link is established.  
PCI BIOS is not present  
The drivers require PCI BIOS to be installed in the system. Check with the  
laptop manufacturer to verify that it supports PCI BIOS calls.  
PCI IRQ routing unavailable - the driver is using ISA IRQ routing  
If the driver cannot set or verify an interrupt through the PCI BIOS, it will  
use ISA IRQ routing and display this message.  
Please specify 0, 4, 8, 16, or 32 for the CACHE keyword  
The CACHE keyword sets the cache line size on the CardBus bridge and  
the PRO/100 CardBus adapter. This parameter should not normally be  
modified.  
Please specify a decimal number below 256 for the LATENCY  
keyword  
The LATENCY keyword sets the latency timer on the CardBus bridge and  
the PRO/100 CardBus adapter. This parameter should not normally be  
modified.  
Please specify a hexadecimal number for the MEMORY keyword  
The value specified for the MEMORY keyword must be a hexadecimal  
number. For NDIS 3 use the form 0xD0000. All others use D0000.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Please specify a number between 3 and 15 for the IRQ keyword  
The IRQ keyword only accepts decimal numbers between 3 and 15.  
Please specify either HALF or FULL for the LINEMODE keyword  
The LINEMODE keyword determines the duplex mode of the network. If  
the network connection is half-duplex, HALF should be used. If the  
network connection is full-duplex, FULL should be used. Do not set the  
duplex mode to full unless the network connection is configured this way. If  
the keyword is not present, the default is AUTO.  
Please specify LOW, MEDIUM, or HIGH for the ERT keyword  
The ERT keyword is used to set the Advanced-Lookahead threshhold. This  
threshhold determines how long to wait before notifying the host of a  
receive event. A lower threshhold is better for slower machines, and a  
higher threshhold for faster machines. Laptops with fast processors should  
use HIGH. This keyword is ignored if the NOEARLYRX keyword is  
present.  
Please specify MEMORY or IO for the MODE keyword  
The value specified for the MODE keyword must be MEMORY or IO.  
The driver is out of memory - decrease the transmit or receive buffer  
size  
The TXBUFFERSIZE and RXBUFFERSIZE keywords are used to  
configure the size of the buffers used by the adapter. These buffers reside in  
host memory. If the driver cannot allocate the amount of memory required  
by the specified configuration, it will display this error. Using the  
RXBUFFERSIZE and TXBUFFERSIZE keywords to reduce the size of the  
buffers can alleviate the problem.  
The IRQ test failed  
The IRQ keyword was used to force a value for the IRQ line, and the  
resource validation check failed. Either remove the IRQ keyword and let  
the driver automatically determine the IRQ, or disable resource checking by  
using the NOCHECK keyword.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The LINESPEED keyword must be set to 10 or 100  
The LINESPEED keyword is used to force the network line speed to either  
10 Mbps or 100 Mbps. If the keyword is not present the line speed is  
automatically detected.  
The loopback test failed  
Before the driver finishes loading, it runs a loopback test. This tests  
transmits a network packet internally testing all the transmit and receive  
hardware before going online. This test also checks that the resources the  
driver is using are valid. If the test fails it most likely means a hardware  
failure or an incompatibility between the card and the CardBus bridge.  
Adding keywords such as NOWRITEPOST, NOPREFETCH, and  
NOBURST may fix the problem.  
The PCI IRQ could not be verified, the driver may not function  
This message only occurs if the PCIIRQ keyword has been used to force  
PCI IRQ routing, and the IRQ keyword has been used to force a particular  
interrupt. If the driver cannot set or verify the IRQ through the PCI BIOS,  
it will give this message. If PCIIRQ is not present and the driver cannot set  
or verify the IRQ through the PCI BIOS it will use ISA IRQ routing.  
The RXBUFFERSIZE keyword must be between 1 and 30  
The value of the RXBUFFERSIZE keyword specifies the number of  
packets used in the receive buffer. Each packet requires approximately 1520  
bytes of host memory.  
The specified IRQ failed resource checking  
The IRQ keyword was used to force a particular IRQ, but the resource  
checking in the driver reported a failure. To override the resource checking  
and load the driver anyway, use the NOCHECK keyword.  
The selected memory is in use  
The MEMORY keyword was used to force a particular memory address,  
but the resource checking in the driver reported a failure.  
To override the resource checking and load the driver anyway, use the  
NOCHECK keyword.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
The selected memory is a ROM address  
The MEMORY keyword was used to force a particular memory address,  
but the resource checking in the driver reported a failure. To override the  
resource checking and load the driver anyway, use the NOCHECK  
keyword.  
The selected memory is a RAM address  
The MEMORY keyword was used to force a particular memory address,  
but the resource checking in the driver reported a failure. To override the  
resource checking and load the driver anyway, use the NOCHECK  
keyword.  
The TXBUFFERSIZE keyword must be between 1 and 10  
The value of the TXBUFFERSIZE keyword specifies the number of  
packets used in the transmit buffer. Each packet requires approximately  
1520 bytes of host memory.  
General Troubleshooting  
If any of the following situations occurs after you have completed the  
installation procedure, review the accompanying information before calling  
Customer Support.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
NOTE:  
This section applies only if you are running MS-DOS, Microsoft Windows 3.x, or  
Workgroups 3.11 with Card and Socket Services that support CardBus. Upgrading  
to new drivers from Intel may also be required, as new Card and Socket software is  
released.  
A driver failed to load, and I’m using Card and Socket Services  
Card and Socket Services are a set of drivers designed to support the PC  
Card (PCMCIA) standard. These drivers are generally supplied by the  
computer manufacturer. Among other functions they  
Hide the PC Card socket hardware implementation from the PRO/  
100 CardBus adapter driver.  
Control the allocation of resources (memory windows, I/O ports,  
interrupts) to the PRO/100 CardBus adapter.  
Recommendations for Use of Card and Socket  
Services with the PRO/100 CardBus adapter.  
A
If the memory manager EMM386.EXE is being used, verify that  
the memory required for the PRO/100 CardBus adapter has been  
excluded from use by the memory manager. Memory managers  
are generally loaded in the CONFIG.SYS. The memory exclusion  
required when using Card and Socket Services is generally larger  
than the exclusion needed by the PRO/100 CardBus adapter  
alone. The safest setting when troubleshooting is to “remark out”  
the entire “C” and “D” memory ranges, as follows:  
DEVICE=C:\[path]\EMM386.EXE NOEMS X=C000-DFFF  
After the driver has been successfully loaded, the memory  
exclusion may be reduced through trial and error or in accordance  
with the Card and Socket Services documentation. The system  
must be rebooted before the revised settings take effect.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
When the PRO/100 CardBus adapter driver is loaded it either  
B
reads a configuration file or uses command line parameters to  
determine which resources it should use. The following is a list of  
driver types, driver file names, and the configuration method used  
by each:  
Type File Name  
Configuration Method  
ODI  
M32AODI.COM  
reads NET.CFG file  
NDIS2 M32ANDIS.EXE  
Packet M32APD.EXE  
reads PROTOCOL.INI file  
uses COMMAND LINE parameters  
The default resources used by the PRO/100 CardBus adapter for all drivers  
except the 32-bit ODI driver, in the absence of a contrary setting in the  
configuration file or on the command line are:  
MEMORY  
AUTO  
AUTO  
AUTO  
AUTO  
IRQ  
IOADDRESS (NDIS)  
PORT (ODI)  
C
Card and Socket Services will generally try to assign a set of  
resources (interrupt, memory window, I/O window) to the PRO/  
100 CardBus adapter. The resources configured for the PRO/100  
CardBus adapter (in a configuration file or on a command line)  
must match the resources assigned by Card and Socket Services.  
If they do not, the driver will generally fail to load.  
The way resources are assigned to the PC Card varies among Card  
and Socket Services manufacturers. The following section  
provides guidelines for SystemSoft Card and Socket Services.  
Review your Card and Socket Services documentation. To use  
Card and Socket Services with the PRO/100 CardBus adapter, you  
must know what resources will be assigned by Card and Socket  
Services, then specify the same resources when configuring the  
PRO/100 CardBus.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
SystemSoft  
The SystemSoft’s CardSoft Card and Socket Services are loaded in the  
CONFIG.SYS file and generally include the following lines:  
DEVICE=C:\CARDSOFT\SOCKET_SERVICES_DRIVER (This file varies by  
machine type)  
DEVICE=C:\CARDSOFT\CS.EXE  
DEVICE=C:\CARDSOFT\CSALLOC.EXE C:\CARDSOFT\CSALLOC.INI  
DEVICE=C:\CARDSOFT\CARDID.EXE (Called a ‘generic’ card driver)  
Resources assigned by CardSoft Card and Socket Services are controlled by  
the files CSALLOC.INI and CARDID.INI. CSALLOC.INI contains a list  
of resources available to Card and Socket Services. CARDID.INI controls  
how resources will be assigned to specific types of cards. The setting in the  
PRO/100 CardBus adapter driver configuration file should match the  
resources assigned by the LAN1xxxxxx keywords in the CARDID.INI file.  
The LAN1MEMORYBASE2 entry can be ignored.  
A driver failed to load, and I’m NOT using Card and  
Socket Services  
A
Verify that a block of memory for use by the PRO/100 CardBus  
adapter has been excluded from any memory manager being  
loaded. Memory managers are generally loaded in the  
CONFIG.SYS. The following example is given for  
EMM386.EXE and a PRO/100 CardBus adapter loading at its  
default memory address of D2000:  
DEVICE=C:\PATH\EMM386.EXE NOEMS X=D200-D2FF  
B
Since your are not using Card and Socket Services, verify that  
power management has been disabled and the PC Card socket is  
powered/enabled in the computer system’s CMOS setup. These  
settings may not be present in all machines. Consult your  
computer documentation for information on how to access and  
modify the system setup.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
C
Reboot the machine by turning off the power and turning it back  
on again (cold boot). If the driver still fails to load, the cause is  
generally a resource conflict. Common causes of resource  
conflicts include sound systems, other PC Card adapters, and built  
in ROMs. The resources required for a PRO/100 CardBus adapter  
include a memory window (MEM keyword), an interrupt (INT  
keyword), and an I/O address (IOADDRESS keyword). The  
default settings are indicated below.  
Review your computer documentation to determine what  
resources are available, or use a trial and error approach. The  
table on the next page shows a suggested trial and error sequence.  
If you use this method, be sure to add a memory exclusion from  
C000-DFFF to the EMM386.EXE line until a suitable memory  
location has been found. Then the memory exclusion can be  
reduced to a 4K window. Perform a cold boot between each trial  
to ensure that the PRO/100 CardBus adapter and PC Card sockets  
are completely reset.  
When the PRO/100 CardBus adapter driver is loaded it either  
reads a configuration file or uses command line parameters to  
determine which resources it should use. See the list of driver  
types, driver file names, and configuration methods earlier in this  
chapter.  
The default resources used by the PRO/100 CardBus adapter  
(except with the 32-bit ODI driver) when no other setting is stated  
are:  
MEMORY  
AUTO  
AUTO  
AUTO  
AUTO  
IRQ  
IOADDRESS (NDIS)  
PORT (ODI)  
Troubleshooting combinations for driver configuration without  
Card and Socket Services:  
TRIAL  
MEM  
INT  
IOADDRESS  
Default  
D2000  
CC000  
D2000  
CC000  
D2000  
5
320  
320  
320  
320  
320  
1
2
3
4
5
10  
10  
11  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
5
CC000  
D2000  
CC000  
D2000  
CC000  
D2000  
CC000  
D2000  
CC000  
D2000  
D2000  
11  
15  
15  
5
320  
320  
320  
340  
340  
340  
340  
340  
340  
340  
340  
6
7
8
9
5
10  
11  
12  
13  
14  
15  
10  
10  
11  
11  
15  
15  
The driver loaded successfully, but I can’t get on the network  
A
Check all connections and verify that the cable drop is good (try a  
cable that is known to work on another workstation).  
B
Reboot by powering down the machine (cold boot). On some  
machines the PC Card controller chipset is not properly reset on a  
warm boot, and this can cause network errors.  
C
D
In a NetWare environment, verify that the frame type running on  
your network server is the same as the FRAME type listed first in  
the NET.CFG. If you are not sure what the correct Ethernet frame  
type is, check with your system administrator. On a multi-server  
network, add a preferred server statement to the NET.CFG.  
There could be an interrupt conflict. Try loading the driver with a  
different interrupt specified in the PRO/100 CardBus adapter  
configuration file. (This may also require some re-configuration  
of Card and Socket Services, if they’re being used.)  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
If the problem persists, and you’re on a 10BASE-T network, try  
E
patching directly into the hub. If the adapter works when plugged  
directly into the hub, but not when attached via a longer cable run,  
verify that the cable run length is within the IEEE 10BASE-T  
specification (100 meters). If the cable length is correct, the  
adapter may be defective. Contact Intel Customer Support.  
Loopback failure reported when driver loads.  
Add the MODE IO parameter to NET.CFG or MODE=IO to  
PROTOCOL.INI.  
Download the latest driver from our website or BBS.  
Windows won’t load after installing adapter.  
Try WIN /D:X. If windows loads this way, add the EMMExclude parameter  
in your SYSTEM.INI file under the [386ENH] sction to exclude the  
memory range used by the Intel adapter.  
For example:  
EMMEXCLUDE=D000-D3FF  
Network Operating System Troubleshooting  
Artisoft LANtastic  
Driver loads but I cannot attach to any other workstations on the  
network.  
Download the latest drivers from our website or BBS.  
Run the test utility to see if there is network traffic.  
Remove Card and Socket Services.  
DEC PATHWORKS  
This section only discusses the problems that might be related to  
configuration of the Intel adapter. For non-Intel related issues, consult your  
PATHWORKS user’s manual. These are the PATHWORKS error codes  
(indicated by “percentage done”):  
83 LOADING NDIS DRIVER...  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
86 LOADING NDIS DATA LINK...  
89 PERFORMING NETBIND...  
92 LOADING SCHEDULER...  
93 LOADING DNP...  
94 LOADING REDIRECTOR...  
95 SETTING COMPUTER NAME...  
98 NETWORK LOADING COMPLETED SUCCESSFULLY  
Use /~# parameter when you run Pathworks SETUP. This will allow you to  
see any error messages given by any driver that fails to load.  
1
If you hang on error code 83%, the Intel NDIS driver failed to  
load. Here are some possible reasons for the failure:  
a Interrupt conflict - some machines use INT 5 for a sound card.  
Change the ni_irq to 10 or 11.  
b Some machines require you to change the default memory  
setting. Try using CE00, C800, or D400. Make sure to make the  
corresponding changes:  
• in the mem parameter line in your PROTOCOL.INI,  
• in the memory exclusion of the EMM386.EXE line in your  
CONFIG.SYS.  
Sample PROTOCOL.INI change:  
MEM=0XD400  
c Some machines require using the mode=io parameter. Add  
mode=io to the Intel section in the PROTOCOL.INI file.  
2
If you hang on error code 92%, the NDIS driver loaded properly  
but the scheduler failed to load. This is usually because your  
interrupt in the PROTOCOL.INI doesn’t match the ni_irq line.  
Make sure you change the ni_irq line to match the INT you want  
to use. This process is described under DEC PATHWORKS in  
Chapter 2, Software Installation.  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
If everything loads and you don’t connect to the network, try the  
3
following  
a Choose another INT setting.  
b Verify that you have a good cable.  
c Verify that you have excluded the memory being used by the  
Intel adapter from the EMM386.EXE line of CONFIG.SYS.  
d Make sure you have M32ANDIS.EXE version 1.14 or above.  
e Always do a cold boot when troubleshooting.  
Microsoft Windows 95 (including OSR2)  
This troubleshooting information is intended primarily for users who  
already had Microsoft Windows installed on their system and are upgrading  
to Windows 95. It may also be helpful to new users of Windows 95 who  
were unable to successfully install the Intel driver using the instructions  
provided in Chapter 2, Software Installation.  
Using Real Mode Card and Socket Services: When using Intel  
PC Card adapters, should I still use DOS real mode Socket  
Services Drivers?  
No, it is recommended that you don’t load the real mode Card and Socket  
Services drivers. It is also recommended that you boot the machine without  
EMM386.EXE in the CONFIG.SYS. In rare cases where you still want to  
load EMM386.EXE, make sure you don’t use the highscan keyword with  
EMM386.EXE. Windows 95 does not detect devices correctly if there is a  
highscan keyword in the EMM386.EXE line of the CONFIG.SYS file.  
Installing from SCSI CDROM or EXTERNAL CDROM: I am  
installing Windows 95 from a SCSI CD-ROM attached to a SCSI  
PC Card Adapter. How can I install Windows 95 if it is recom-  
mended that I don’t load real mode card and socket services  
drivers since most SCSI requires me to load a real mode SCSI  
driver?  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Put a copy of the directory for CAB files of Windows 95 from the CD-  
ROM on to your local hard drive. This will take up approximately 35MB of  
space. This will allow you to change settings on the system without using  
your CD-ROM. This also allows you to install Windows 95 without  
depending on the real mode SCSI CDROM driver.  
Installing Windows 95 PC Card support: How do I install PC  
Card support for the PRO/100 CardBus adapter?  
It is only necessary to install PC Card support in Windows 95 if the version  
of Windows 95 supports CardBus. Only Windows 95 version OSR2 or later  
supports CardBus. Consult the Windows 95 Installation section of this  
User's Guide for information on determining which version of Windows 95  
you have.  
NOTE:  
If you do not have Windows 95 version 4.00.950b (OSR2) or later, the following  
instructions do not apply. The Intel PRO/100 CardBus adapter will be loaded using  
its own driver, and not by using Windows 95 PC Card support.  
To install PC Card Socket support, it is always advisable to let Windows 95  
do an autodetect to determine the type of PC Card controller you have. Also  
make sure you have not loaded any real mode Card and Socket Services  
drivers before proceeding.  
1
2
3
4
5
Click the Start button in the lower left corner of the screen.  
Choose the menu item: Settings.  
Choose the menu item: Control Panel.  
Double click on the “PC Card (PCMCIA)” icon.  
One of two dialog boxes should appear:  
a If a dialog box entitled “PC Card (PCMCIA) Properties”  
appears, and “Socket Status” displays the status of Socket 1 and  
Socket 2, this means you have already installed the 32-bit PC  
Card support and you are finished. Proceed to Step 8.  
b If a dialog box entitled “Welcome to the PC Card (PCMCIA)  
Wizard” appears, proceed to step 6.  
c If neither of these dialog boxes appears, add PC Card support by  
doing the following: double click on My Computer, double click  
on Control Panel, double click on Add New Hardware, and click  
Yes for Autodetect. After Windows 95 detects and installs PC  
Card support, restart Windows 95, and go back to step 1.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
6
The dialog box “Welcome to the PC Card (PCMCIA) Wizard”  
will ask the following question: “Are you using a PC card  
(networking card, CD-ROM connected to a SCSI card, etc.) to  
install windows?” The default answer is No. If you did use a PC  
Card SCSI adapter or a network card to install Windows 95, it is  
recommended that you keep a copy of the Windows 95 directory  
on your hard disk and not load any real mode PC Card or network  
drivers. Press Enter to select No.  
7
The dialog box “PC Card (PCMCIA) Wizard” should now appear.  
It should read as follows: “Windows did not find any existing real  
mode PC Card drivers. Either you did not have any, or you have  
drivers that Windows couldn’t detect.” It will ask you “Do you  
want to review your system files and select real mode PC Card  
drivers so Windows can disable them?” The default answer  
should be No. Now use the following decision table:  
a If you are not sure if you have real mode Card and Socket  
Services or you do not know what they are, contact Microsoft  
Customer Support or the manufacturer of your notebook  
computer.  
b If you know that you do not have real mode Card and Socket  
Services installed, choose No and press Enter. Go on to step 8.  
c If you know that you have real mode Card and Socket Services  
and you wish to keep using them, this is not recommended. We  
recommend removing real mode drivers and using the 32-bit  
driver.  
d If you know that you have real mode Card and Socket Services  
installed and Windows 95 either did or did not detect them, you  
can now remove. Choose Yes and press Enter.  
e A new dialog box should appear and it should read: “Windows  
has selected the known PC Card drivers in your CONFIG.SYS  
file. Make sure that the correct drivers are selected, or make any  
changes. When you click Next, Windows will disable the  
selected PC card drivers in your CONFIG.SYS file.” Choose  
option 1, 2, or 3 below:  
NOTE:  
The dialog boxes displayed are the same except for the name of the file to be  
modified. The first box modifies the CONFIG.SYS, the next the AUTOEXEC.BAT and  
the third the SYSTEM.INI file.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
e1 Let Windows 95 automatically find the drivers for you. This  
is recommended. To do this click the Next button 3 times.  
This lets Windows 95 automatically modify the following  
files: CONFIG.SYS, AUTOEXEC.BAT, and SYSTEM.INI  
e2 Choose the drivers yourself if none are selected. This is  
recommended only for experienced users.  
e3 Override choices made by Windows 95. This is not  
recommended. Only experienced users should attempt this.  
f This is the next to last dialog box for the wizard. It should read  
as follows: “You have finished the PC card wizard. To enable  
32-bit support, click Finish, and then restart your computer for  
the changes to take effect.” Click on the Finish button.  
g A final box should appear entitled “System Settings Change”. It  
should read as follows: “You must shut down Windows and  
TURN YOUR COMPUTER OFF to continue setting up this PC  
Card device. Would you like to shut down your computer now?”  
Click Yes. Make sure that the computer is completely turned off  
before turning it back on.  
8 Insert your Intel CardBus adapter. Windows 95 should now detect  
the Intel card, and put up a dialog box. It should automatically  
load the drivers from the Windows 95 directory. If it asks you to  
supply a manufacturer’s disk, insert the Intel Network Drivers  
Disk. Press Enter. It will ask you to restart now. Choose yes. (We  
recommend copying the Windows 95 RETAIL or WIN95  
directory to your hard disk so that you won’t be dependent on the  
CD-ROM every time you need to reinstall.)  
Windows 95 version 4.00.950b (OSR2) - The CardBus Adapter  
is detected by Windows 95 OSR2 but does not initialize or  
continues to show errors in Device Manager after changing  
resources.  
The PRO/100 CardBus adapter may need to be installed manually if  
Windows 95 OSR2 detects the PRO/100 CardBus adapter but does not  
initialize or continues to show errors in Device Manager after changing  
resources. (To determine whether you have Windows 95 OSR2, go to  
Settings, Control Panel, and System. The General tab in the System  
Properties window will list the version of Windows 95 installed on your  
system. The OSR2 version is 4.00.950b.)  
Once the CardBus Adapter has been installed into a PC Card slot, Plug and  
Play and hot swapping in that PC Card slot are disabled. However, the other  
PC Card slot will continue to function normally, enabling Plug and Play and  
109  
HotSwap of 16-bit and 32-bit PC Cards.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Manual Installation of the PRO/100 CardBus adapter  
under Windows 95 OSR2  
1 Click the Start button in the lower left corner of the screen.  
2 Choose the menu item: Settings.  
3 Choose the menu item: Control Panel.  
4 Double-click the System icon.  
5 In the System Properties window, view the Device Manager tab.  
6 In the Device Manager window, click PCMCIA socket.  
There will be two CardBus controllers listed under PCMCIA socket.  
6a If the PRO/100 CardBus adapter is in the top slot, click the top  
CardBus controller to select it.  
6bIf the Adapter is in the bottom slot, click the bottom CardBus  
controller to select it (make a note of which slot the Adapter was  
in).  
6c Once the controller is selected, click Properties. Check the box  
Disable in this hardware profile. Click Ok. You will now see a red  
‘X’ on the CardBus controller that was disabled. Click OK on the  
Device Manager tab.  
7 Open a DOS session in Windows 95 OSR2 and delete the following  
files:  
\WINDOWS\INF\*.BIN  
\WINDOWS\INF\NETM32A.INF  
\WINDOWS\SYSTEM\M32A.SYS  
8 Rename the files CONFIG.SYS and AUTOEXEC.BAT to ensure  
that Windows 95 OSR2 runs in 32-bit protected-mode. Windows 95  
OSR2 does not support the use of real-mode and protected-mode  
drivers simultaneously. This combination may cause unpredictable  
results. If these drivers are of mixed types, the computer might stall  
or the network might not work. The following commands can be  
used to rename the AUTOEXEC.BAT and CONFIG.SYS:  
REN C:\AUTOEXEC.BAT C:\AUTOEXEC.00A  
REN C:\CONFIG.SYS C:\CONFIG.00A  
9 Shut down Windows 95 OSR2 and power off the machine. Remove  
the PRO/100 CardBus adapter physically from the PC Card slot  
(make a note of whether the Adapter was in the top or bottom PC  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Card slot).  
10 After Windows 95 OSR2 comes up and all drive activity has  
stopped, reinsert the Adapter in the same PC Card slot it was in  
previously. Click the Start button, select Settings, and then Control  
Panel. Double-click Add New Hardware. When asked, ‘Do you want  
Windows to search for your new hardware?’, select NO and click  
Next. Select ‘Network adapters’ and click Next. Under Manufac-  
turers select ‘Intel’ and click the Have Disk button. Insert the Intel  
Network Drivers diskette in the floppy drive and make sure A: is  
selected in the ‘Copy Manufacturer’s files from’ box. Click OK.  
Select ‘Intel’ under Manufacturers and under Model select ‘Intel  
EtherExpress PRO/100 CardBus adapter manual load’, Click OK.,  
then OK again, then Next and Finish.  
You will now be welcomed to the PC Card (PCMCIA) Wizard.  
Typically, a copy of the Windows 95 OSR2 CAB files should be on  
the machine. When asked, ‘Are you using a PC card to install  
Windows?’, select ‘No’. When asked ‘Do you want to review your  
system files ..?’, select No. Click Next and then Finish.  
11 Select ‘Yes’ to shut down the computer so Windows 95 OSR2 will  
add the PRO/100 CardBus adapter in Device Manager and under  
Network components. Depending on the installation, you might be  
prompted for the Windows 95 OSR2 diskettes or CD to setup a basic  
Microsoft network. Windows 95 OSR2 includes 32-bit Clients for:  
• Microsoft Networks  
• NetWare Networks  
Hardware Specific Issues: Are there Laptops or Notebooks that  
don’t work with Windows 95 and PC Card adapters?  
Read the HARDWARE.TXT file in the Windows 95 directory. This file is  
supplied by Microsoft and describes machine-specific problems.  
NetWare Server is Not Found: Everything seems to load, I have  
checked that I have installed the Microsoft Client for NetWare,  
but I still can’t see my NetWare server when I click on Network  
Neighborhood.  
Sometimes the Frametype autodetection fails. You can force the frame type  
IPX uses by going to the My Computer, Control Panel, Network, IPX/SPX  
compatible properties.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Microsoft Windows for Workgroups  
This section describes general troubleshooting procedures and possible  
error codes you might encounter under Windows for Workgroups. Before  
doing anything else, check your configuration files against the sample files  
in Chapter 3, Configuration Reference of this document.  
Drivers load but you cannot see anybody on the network.  
Check that you have selected the correct workgroup.  
Ensure that there are no spaces in your computer name.  
When trying to perform the add adapter function, an error  
occurs stating the OEMSETUP file does not contain adapter  
information.  
Move or rename the oem*.inf files from the windows system directory  
(C:\WINDOWS\SYSTEM) and invoke the network setup program again.  
Drivers do not load or errors are reported when NET START is  
executed.  
Ensure you are excluding the memory range used by the Intel adapter from  
the memory manager in CONFIG.SYS.  
Drivers do not load or errors are reported when NET START is  
executed for Windows For Workgroups.  
Ensure you are excluding the memory range used by the Intel adapter from  
the memory manager in CONFIG.SYS.  
If you are using NDIS2, edit the SYSTEM.INI file and look at NETCARD=  
line.  
An error occurs when NET START executes for Windows For  
Workgroups.  
Download the latest drivers from our website or BBS.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
When using ODI for NetWare, I get attached to server, but can’t  
see the F: login drive, “drive not ready” is the error message  
you get when trying to login.  
There are several reasons that this will happen, but the most common  
reasons are:  
DoubleSpace defaults to G or H as lastdrive, thus H: or I: will be  
the login drive when using DoubleSpace. The lastdrive command  
in CONFIG.SYS seems to be overruled by DoubleSpace lastdrive.  
Sample NET.CFG when using VLMs:  
NetWare DOS Requester  
FIRST NETWORK DRIVE = F  
The following error occurred while loading protocol 0, error  
58:...  
This usually occurs when you have installed the IPX support stack in WFW  
and ODI, and later decided to switch to NDIS2 and not use IPX as another  
stack.  
WFW sometimes will forget to remove the NWLINK.386 and  
NWBLINK.386 from the transport line in the [386enh] section of your  
C:\WINDOWS\SYSTEM.INI file. Fix this by making sure that the  
transport line in that section reads:  
[386ENH]  
TRANSPORT=NETBEUI.386  
Error 7323 or 3658:, The IFSHLP.SYS driver is not installed, or  
Windows Network was not started, check your configuration.  
Make sure the IFSHLP.SYS is installed in you CONFIG.SYS file and that  
this file exists in the C:\WINDOWS directory. See the sample  
CONFIG.SYS for proper syntax.  
Error 7733: The protocol manager has reported an incomplete  
binding.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Make sure your \WINDOWS\PROTOCOL.INI has proper bindings. The  
MS$NDISHLP and NETBEUI sections should have a  
BINDINGS=M32AMAC. Chances are, the binding statement is wrong. See  
the sample PROTOCOL.INI file.  
WFW works the first time I boot the machine, but after a warm  
boot, it fails to see other machines.  
Turn off the power to shut down the machine and do a COLD BOOT. See if  
this fixes the problem.  
When using WFW and ODI support for NetWare, I was able to  
login before I installed the WFW support for ODI. Now I can’t  
see the server anymore.  
You were probably using frame ethernet_802.2 for the IPXODI to connect  
to NetWare. The WFW network setup program shuffles the NET.CFG  
frame types such that ethernet_802.3 becomes the first. To solve this  
problem, just shuffle them back and make sure the first frame type is the  
one your IPXODI needs to use; in this case it is ethernet_802.2.  
When I do the NetWare ODI stack, VLM says “No server found.”  
Or, when I use NDIS2, everything loads but I can’t see other  
machines on the network.  
1
2
3
If using NetWare, try changing the first frame type in the  
C:\NWCLIENT\NET.CFG file. Make sure you know what frame  
type your NetWare server supports. IPX binds to the first frame  
type in the NET.CFG file.  
Try without loading Card and Socket Services, and leave only the  
PRO/100 CardBus adapter in the machine with no other cards in  
there. This is always a good troubleshooting technique to create a  
bare-bones environment.  
Change INT setting in the C:\NWCLIENT\NET.CFG file. Some  
machines use INT 5 for sound cards. Try changing the INT to 10  
or 11 or 15.  
If using ODI, use INT 11 in C:\NWCLIENT\NET.CFG.  
If using NDIS2, use INT=11 in C:\WINDOWS\PROTOCOL.INI.  
4
Check and make sure that the memory used by the PRO/100  
CardBus adapter is excluded from the EMM386.EXE line in the  
CONFIG.SYS.  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If it is already excluded, try changing memory to CC000. Make  
sure to make corresponding changes in the EMM386.EXE  
exclusion parameter in the CONFIG.SYS. For example:  
x=cc00-cdff  
5
6
Try swapping cards or cables whenever possible during  
troubleshooting.  
Always do a COLD BOOT during troubleshooting.  
Novell NetWare  
Invalid network drive specified.  
Check the LASTDRIVE parameter in CONFIG.SYS if using NETX, or the  
FIRST NETWORK DRIVE statement in NET.CFG if using VLM. These  
should be set to the letter after your last local drive. Typically one would  
use LASTDRIVE=E or FIRST NETWORK DRIVE=F. If you are using a  
hard drive compression program that creates extra drives (i.e. doublespace  
or stacker), you will need to increase the values of the parameters (i.e.:  
LASTDRIVE=H or FIRST NETWORK DRIVE=I).  
File Server not found.  
Run the Intel test utility to see if any network traffic is visible.  
Check the frame types in the NET.CFG file. Your frame type  
must match the frame type used by the file server. Remember that  
the adapter binds to the first frame type listed in the NET.CFG. If  
you are not sure what frame types the Novell server is running,  
check the NET.CFG file of a workstation that is able to attach. If  
you have access to the server, type CONFIG at the server console  
and the screen will display the frame types.  
If this is a multi-server environment add a PREFERRED  
SERVER parameter to the NET.CFG file.  
Verify the network drop is working by using a cable drop that  
works for another workstation.  
Troubleshooting Checklist  
Try the following troubleshooting measures before calling Intel Customer  
Support:  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
Read the README file on the floppy disk. It contains important  
information (including known incompatibilities and machine  
specific issues) that may solve your problem.  
Obtain current versions of drivers for your adapter from the Intel  
BBS or http://support.intel.com  
Boot the computer in a clean environment (press F8 or hold down  
the Shift key to bypass loading of CONFIG.SYS and  
AUTOEXEC.BAT), then use the Intel test utility to see if the  
adapter is functioning and detecting network traffic.  
When loading drivers or running the test utility, have the dongle  
cable attached to the PRO/100 CardBus adapter.  
Under Novell, ensure that the FRAME TYPE you are using is the  
same as that of the file server. The server frame type should be  
specified as the first frame type in the NET.CFG.  
In a twisted pair environment, try plugging directly into the hub or  
concentrator.  
Try using a network connection that works for another computer.  
Try using the Intel adapter on a different computer.  
Try another Intel adapter if available.  
If your computer has multiple PC Card sockets, move the adapter  
to another socket.  
If you have more than one PC Card device in your computer,  
remove the non-Intel PC Card devices during your configuration/  
testing.  
Make sure you are using the most recent version of Card and  
Socket Services. Call the computer manufacturer or the company  
that makes the Card and Socket Services. Upgrading to new  
drivers from Intel may also be required, as new Card and  
Socket Services software is released.  
Check with your laptop PC manufacturer for BIOS updates. Your  
BIOS may need upgrading.  
Test the Intel adapter without loading Card and Socket Services to  
see if there is a conflict between the Intel adapter configuration  
and that of Card and Socket Services. The interrupt, memory  
address location, and I/O address specified to the Card and Socket  
service drivers must match the Intel configurations in NET.CFG  
or PROTOCOL.INI (if used).  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Make sure that the Intel adapter is not conflicting (interrupt,  
memory address, I/O address) with any other adapters or  
hardware that is installed in the computer (including sounds cards,  
CD-ROM drives and PEN devices).  
Try loading the CardBus drivers at different memory locations  
(i.e.: C800, CC00, D400, D800).  
Try using different interrupt locations (i.e.: 5, 10, 11). Check  
BIOS settings for PCI interrupts.  
Try using different port addresses (i.e.: 280, 290, 310, 320).  
Try adding the parameter MODE=IO in PROTOCOL.INI or  
MODE IO in NET.CFG.  
If the Intel adapter was functioning correctly then stopped, make  
sure none of configuration files have been changed by newly  
installed software or hardware.  
Disable all power management features in the CMOS settings on  
the computer.  
Disable all shadow RAM features in the CMOS settings on the  
computer.  
Ensure that you are excluding the memory range used by the Intel  
adapter from your memory manager (EMM386.EXE,  
QEMM.EXE, etc.).  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH A P T ER 4  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Intel Automated Customer  
Support  
YoucanreachIntel’sautomatedsupportservices24hoursaday, every  
day at no charge. The services contain the most up-to-date information  
about Intel products. You can access installation instructions,  
troubleshooting information, and general product information.  
World Wide Web &  
Internet FTP  
Intel Bulletin Board  
Service (BBS)  
Access Intel’s World Wide Web  
home pages or download  
information using anonymous FTP.  
Use Intel’s BBS. Dial  
in by modem at 8-N-1,  
and up to 14.4 Kbps.  
Troubleshooting  
Software updates  
Installation notes  
Product information  
How to access:  
See web addresses on next page.  
US and Canada:  
1-503-264-7999  
Europe:  
+44-1793-432955  
Worldwide:  
+1-503-264-7999  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intel Web and Internet Sites  
Support: http://support.intel.com  
News: news://cs.intel.com  
Network Products: http://www.intel.com/network  
Corporate: http://www.intel.com  
FTP Host: ftp.intel.com  
FTP Directory: /pub/support/enduser_reseller/etherexpress_lan_adapters  
Intel Customer Support Technicians  
Other support services: You can purchase a range of support  
services, including 24 hour support, per incident support, on-site  
service, and software and hardware maintenance agreements. For  
details about the Intel Support Service options, download document  
8549 from one of the automated services.  
Worldwide access: Intel has technical support centers worldwide.  
Many of the centers are staffed by technicians who speak the local  
languages. For a list of all Intel support centers, the telephone  
numbers, and the times they are open, download document 9089 from  
one of the automated services.  
If you don’t have access to automated services, contact your local  
dealer or distributor. Or call +1-916-377-7000 from 07:00 to 17:00  
Monday - Friday, U.S. Pacific Time.  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B  
Specifications  
General Specifications  
Model MBLA3200  
Cable: 100Base-TX unshielded twisted pair for use on  
Category 5 (data grade) cabling; 10Base-T unshielded  
twisted pair (UTP)  
Connector: RJ-45  
Operating Distance: 328 ft (100 m)  
Ethernet specifications  
Ethernet IEEE 802.3 for 10 Mbps, 802.3u for 100 Mbps  
Type II CardBus PC Card  
Full or half duplex at 10 or 100 Mpbs  
Size:  
3.37 in (86 mm) x 2.13 in (54.0 mm)  
x 0.20 in (5.0 mm) excluding adapter cable  
and network connection  
Weight:  
0.85 oz (24 g)  
Power Requirements:  
10Base-T  
3.3V DC, 360 mA typical, 440 mA max  
3.3V DC, 285 mA typical, 315 mA max  
100Base-TX  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X B  
General Specifications (continued)  
Temperature Range:  
Operating:  
Storage:  
32°F to 131°F (0°C to 55°C)  
-4°F to 149°F (-20°C to 65°C)  
95% max. noncondensing  
Humidity:  
LEDs:  
Link integrity, transmission activity  
Certification:  
FCC Code of Federal Regulations, Title 47,  
Part 15, Subpart B, Class A  
CE Mark (EN55022, Class A, EN50082-1)  
Compatibility  
Platforms  
At the time of printing this manual, the PRO/100 CardBus 32 adapter  
supports popular CardBus compliant PCs, including Acer, Fujitsu,  
Dell, Compaq, DEC, Hewlett-Packard, IBM, NEC, Texas  
Instruments, and Toshiba. Contact Intel for an updated list of  
CardBus compliant PCs.  
Card and Socket Services  
Supports CardBus compliant PC Card support in Windows 95 version  
4.00.950b (OSR2 ) and later. Contact Intel for an updated list of Card  
and Socket Services supporting CardBus and information on using the  
PRO/100 CardBus 32 adapter with that software.  
Network Operating Systems  
Supports all popular network operating systems including Novell  
NetWare, Microsoft Windows 95, Microsoft Windows NT, Microsoft  
Windows for Workgroups, Microsoft LAN Manager, Artisoft  
LANtastic, Banyan VINES, and DEC PATHWORKS. NDIS and ODI  
support for DOS and IBM OS/2. Packet driver support for TCP/IP.  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Technical Specifications  
• Supports Toshiba ToPIC 95, Texas Instruments PCI 1130 and  
PCI 1131, Cirrus Logic CL-PD 6832 and Ricoh.  
• Variable interrupts, 3 to 15.  
• Variable I/O window, 128 bytes needed.  
• Requires only a 4Kbyte memory window on a 4Kbyte bound-  
ary, within segment C000h to EF00h (DOS drivers only).  
• Keyword disables link integrity checking.  
• Suspend/resume and HotSwap support in Windows 95 OSR2  
and later.  
• Full-duplex capability on 10 or 100 Mbps full-duplex network  
(requires full-duplex switch).  
• Advanced Look-Ahead Pipelining increases performance.  
• Windows-based installation program automatically configures  
PC and NOS setup.  
• Diagnostic test program (M32ATEST.EXE)  
Supported Environments  
• NDIS 3 driver for Microsoft Windows 95 and Microsoft  
Windows NT 3.51 and 4.0.  
• Packet Driver  
• Novell NetWare 16-bit ODI client for DOS, Windows for  
Workgroups, and OS/2 and 32-bit ODI for DOS, Windows 3.x,  
and Windows 95 (including OSR2).  
• NetWare Server for versions 3.12, 4.10, and 4.11.  
• NDIS2 DOS, Windows for Workgroups 3.11 and IBM OS/2.  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X B  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C  
Limited Lifetime Warranty  
Intel warrants to the original owner that the hardware product delivered in this  
package will be free from defects in material and workmanship. This warranty  
does not cover the product if it is damaged in the process of being installed or  
improperlyused.  
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY,  
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT  
NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE ARISING OUT OF ANY  
PROPOSAL, SPECIFICATION, OR SAMPLE.  
This warranty does not cover replacement of adapter products damaged by  
abuse, accident, misuse, neglect, alteration, repair, disaster, improper  
installation, or improper testing. If the product is found to be otherwise  
defective, Intel, at its option, will replace or repair the product at no charge  
except as set forth below, or refund your purchase price provided that you  
deliver the product along with a Return Material Authorization (RMA) number  
(see below), along with proof of purchase (if not registered), either to the dealer  
from whom you purchased it or to Intel with an explanation of any deficiency.  
If you ship the product, you must assume the risk of damage or loss in transit.  
You must use the original container (or the equivalent) and pay the shipping  
charge. Intel may replace or repair the adapter product with either new or  
reconditioned parts, and any part or product replaced becomes Intel’s property.  
Repaired or replaced products will be returned at the same revision level as  
received or higher, at Intel’s option. Intel reserves the right to replace  
discontinued product with an equivalent current generation product.  
This warranty gives you specific legal rights and you may have other rights  
which vary from state to state. All parts or components contained in this  
hardware product are covered by Intel’s limited warranty for this product; the  
product may contain fully tested, recycled parts, warranted as if new. For  
warranty information call one of the numbers below.  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X C  
Returningadefectiveproduct  
From North America:  
Before returning any product, contact Intel Customer Support and obtain a  
Return Material Authorization (RMA) number by calling +1-916-377-7000.  
If the Customer Support Group verifies that the product is defective, they will  
have the RMA department issue you an RMA number to place on the outer  
package of the product. Intel cannot accept any product without an RMA  
number on the package.  
All other locations:  
Return the product to the place of purchase for a refund or replacement.  
INTELADAPTERMONEY-BACKGUARANTEE(NorthAmerica  
Only)  
Intel wants you to be completely satisfied with the Intel adapter product that  
you have purchased. Any time within ninety (90) days of purchase, you may  
return your Intel adapter to the original place of purchase for a full refund of  
the purchase price from your dealer. Resellers and Distributors, respectively,  
accepting returns and refunding money back to their customers may return Intel  
adapters to their original place of purchase. Intel guarantees that it will accept  
returns under this policy and refund the original purchase price to customers  
purchasing directly from Intel.  
Limitation of Liability and Remedies  
INTEL SHALL HAVE NO LIABILITY FOR ANY INDIRECT,  
SPECULATIVE, CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR  
SPECIAL DAMAGES ARISING FROM THE USE OF OR INABILITY TO  
USE THIS PRODUCT INCLUDING, WITHOUT LIMITATION, LOSS OF  
USE, BUSINESS INTERRUPTIONS, LOSS OF PROFITS, AND LOSS OF  
GOODWILL, WHETHER ANY SUCH DAMAGES ARISE OUT OF  
CONTRACT NEGLIGENCE, TORT, OR UNDER ANY WARRANTY,  
IRRESPECTIVE OF WHETHER INTEL HAS ADVANCE NOTICE OF  
THE POSSIBILITY OF ANY SUCH DAMAGES. NOTWITHSTANDING  
THE FOREGOING, INTEL’S TOTAL LIABILITY FOR ALL CLAIMS  
UNDER THIS AGREEMENT SHALL NOT EXCEED THE PRICE PAID  
FOR THE PRODUCT. THESE LIMITATIONS ON POTENTIAL  
LIABILITIES WERE AN ESSENTIAL ELEMENT IN SETTING THE  
PRODUCT PRICE. INTEL NEITHER ASSUMES NOR AUTHORIZES  
ANYONE TO ASSUME FOR IT ANY OTHER LIABILITIES.  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Lifetime Hardware Warranty  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, so the above limitations may not apply to you.  
Software provided with the hardware product is not covered under the  
hardware warranty described above. See the applicable software license  
agreement which shipped with the adapter product for details on any software  
warranty.  
April 28, 1994  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X C  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D  
Network Software License  
Agreement  
BY USING THIS SOFTWARE, YOU ARE AGREEING TO BE  
BOUND BY THE TERMS OF THIS AGREEMENT. DO NOT USE  
THIS SOFTWARE UNTIL YOU HAVE CAREFULLY READ AND  
AGREED TO THE FOLLOWING TERMS AND CONDITIONS. IF  
YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,  
PROMPTLY RETURN THE SOFTWARE PACKAGE AND ANY  
ACCOMPANYING ITEMS.  
LICENSE: Intel Corporation (“Intel”) grants you the non-exclusive  
right to use the enclosed software program (the “Software”). You will  
not use, copy, modify, rent, sell or transfer the Software or any  
portion thereof except as provided in this Agreement.  
You may:  
1. Install/use the Software on a single computer or on a single local  
area network (“LAN”) server;  
2. Copy the Software solely for backup or archival purposes,  
including copying the Software into memory.  
RESTRICTIONS:  
You Will Not:  
1. Sublicense the Software;  
2. Reverse engineer, decompile, or disassemble the Software;  
3. Copy the Software, in whole or in part, except as provided in this  
Agreement.  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X  
D
TRANSFER: You may transfer the Software to another party if the  
receiving party agrees to the terms of this Agreement and you retain  
no copies of the Software and accompanying documentation. Transfer  
of the Software terminates your right to use the Software.  
OWNERSHIP AND COPYRIGHT OF SOFTWARE: Title to the  
Software and all copies thereof remain with Intel or its vendors. The  
Software is copyrighted and is protected by United States and  
international copyright laws. You will not remove the copyright  
notice from the Software. You agree to prevent any unauthorized  
copying of the Software.  
DUAL MEDIA SOFTWARE: If the Software package contains  
multiple media, you may only use the disks appropriate for your  
single-user computer or LAN.  
WARRANTY: The Software is provided “AS IS.” Intel warrants that  
the media on which the Software is furnished will be free from defects  
in material and workmanship for a period of one (1) year from the  
date of purchase. Upon return of such defective media, Intel’s entire  
liability and your exclusive remedy shall be the replacement of the  
Software.  
THE ABOVE WARRANTIES ARE THE ONLY WARRANTIES  
OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING  
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR  
ANY PARTICULAR PURPOSE.  
LIMITATION OF LIABILITY: NEITHER INTEL NOR ITS  
VENDORS SHALL BE LIABLE FOR ANY LOSS OF PROFITS,  
LOSS OF USE, LOSS OF DATA, INTERRUPTIONS OF  
BUSINESS, NOR FOR INDIRECT, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER  
UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
AUDIT: Intel reserves the right to have audits conducted to verify  
your compliance with this Agreement.  
TERMINATION OF THIS LICENSE: Intel may terminate this  
license at any time if you are in breach of any of its terms and  
conditions. Upon termination, you will immediately destroy the  
Software or return all copies of the Software and documentation to  
Intel.  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Software License Agreement  
U.S. GOVERNMENT RESTRICTED RIGHTS: The Software and  
documentation were developed at private expense and are provided  
with “RESTRICTED RIGHTS.” Use, duplication, or disclosure by the  
Government is subject to restrictions as set forth in FAR 52.227-14  
and DFAR 252.227-7013 et seq. or its successor.  
EXPORT LAWS: You agree that the distribution and export/re-  
export of the Software is in compliance with the laws, regulations,  
orders or other restrictions of the U.S. Export Administration  
Regulations.  
APPLICABLE LAW: This Agreement is governed by the laws of  
the State of California and the United States, including patent and  
copyright laws. Any claim arising out of this Agreement will be  
brought in Santa Clara County, California.  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X  
D
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix E  
Regulatory Agency Notices  
FCC Compliance Statement  
This product has been tested and found to comply with the limits for a  
Class B computing device pursuant to Part 15 of the FCC rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. Installed correctly, it probably  
will not interfere with radio or TV reception. However, we do not  
guarantee the absence of interference.  
This product generates and uses energy of about the same frequency as  
radio and TV broadcasts. Installed incorrectly, it may interfere with  
reception of radio and TV broadcasts.  
If you suspect this product is causing interference, turn your computer  
on and off while the radio or TV is showing interference. If the  
interference disappears when you turn the computer off and reappears  
when you turn the computer on, something in the computer is causing  
interference.  
To reduce interference, try these suggestions:  
Change the direction of the radio or TV antenna.  
Move the computer, radio or TV. For example, if the computer  
is to the right of the TV, move it to the left of the TV. Or move  
them farther apart.  
Plug the computer into a different electrical outlet than the  
radio or TV.  
Ensure that all expansion slots (on the back or side of the  
computer) are covered. Also ensure that all metal retaining  
brackets are tightly attached to the computer.  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDI X E  
NOTE  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
CAUTION  
If the device is changed or modified without permission from Intel, the  
user may void his or her authority to operate the equipment.  
Canadian compliance (Industry Canada)  
When tested in at least one intended host:  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the interference-  
causing equipment standard entitled “Digital Apparatus”, ICES-003 of  
the Canadian Department of Communications.  
Cet appareil numérique respecte les limites bruits radioélectriques  
applicables aux appareils numériques de Class B prescrites dans la  
norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003  
édictée par le Ministre Canadien des Communications.  
Manufacturer declaration  
This certifies that Intel EtherExpress PRO/100 Mobile Adapters  
comply with the EU Directive 89/336/EEC, using the EMC standards  
EN55022 (Class B) and EN50082-1. This product also meets or  
exceeds EN60950 safety requirements.  
This product has been tested and verified to meet CISPR 22 Class B  
requirements.  
Intel Corporation  
Network Products Division - MS JF3-408  
2111 N.E. 25th Ave.  
Hillsboro, Oregon 97124  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Symbols  
100Base-TX 1  
10Base-T 1  
15-pin connector 1, 4  
A
Artisoft LANtastic 26  
installation 26  
sample configuration files 60  
troubleshooting 104  
AT&T StarGROUP  
installation 26  
Autodetection of PC Cards 2  
B
Banyan VINES  
installation 26  
sample configuration files 63  
Bulletin Board 119  
C
Cabling  
data grade 1  
Card and Socket Services 56, 99, 101  
SystemSoft 101  
Category 5 cabling 1, 2  
Configuration  
files, sample 60  
Customer Support 119  
D
DCOMPVLM.BAT 41, 47, 53  
DEC PATHWORKS 28  
installation 28  
sample configuration files 64  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I NDEX  
troubleshooting 104  
Default values 25  
Device driver 25  
Diagnostic Test Utility  
parameters 82  
Diagnostics 91  
Driver parameters 71  
E
Equipment, required 2  
Error messages 94  
Exclusion, memory 60  
F
FTP LANWatch  
installation 31  
NDIS driver 32  
Packet driver 31  
FTP PC/TCP 33  
and NetWare 36  
installation 33  
Packet driver 35  
Full-duplex operation 59  
G
Generic installation 37  
H
HotSwap 58  
HP LAN Manager  
installation 37  
I
IBM DOS LAN Requestor 40  
IBM Local Area Network Support Program 38  
installation 38, 39  
IBM Local Area Support Program 38  
IBM PC LAN 40  
Installation  
generic 37  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I N D E X  
manual 41  
Microsoft Windows 21  
Microsoft Windows for Workgroups 21  
Novell NetWare 21  
Program, Xircom 21, 25, 44, 55  
VLM shell 21  
Installation, manual  
Windows 95 OSR2 110  
Intel Web and Internet Sites 120  
L
LAN Manager  
Ungermann-Bass Net/One 51  
LANtastic, Artisoft 26  
LANWatch, FTP 31  
LED indicators 90  
Loopback failure 104  
M
Manual installation 41  
Memory  
exclusion 60  
Messages 94  
N
NDIS 3.0 driver  
parameters 76  
NDIS driver  
Artisoft LANtastic 26  
FTP LANWatch 31  
FTP PC/TCP 33  
generic 37  
Microsoft Windows for Workgroups 43  
parameters 73  
SunSoft PC-NFS 48  
Ungermann-Bass Net/One LAN Manager 51  
Wollongong PathWay Access for DOS 52  
NET.CFG file 72, 73  
Network  
drivers 25  
Drivers Disk 25  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I NDEX  
operating system 21, 25  
software installation 25  
NETX shell support 21  
Novell NetWare 47  
and FTP PC/TCP 36  
installation 21  
troubleshooting 115  
O
ODI driver  
FTP PC/TCP 33  
generic 37  
Microsoft Windows for Workgroups 43  
parameters 71  
Wollongong PathWay Access for DOS 52  
OnNet with FTP PC/TCP 33, 34  
OSR2 109, 110  
P
Packet driver  
FTP LANWatch 31  
FTP PC/TCP 33  
loading sequence 82  
parameters 81  
Parameters, driver 71  
PATHWORKS, DEC 28  
PC Card slots 2  
PC-NFS 48  
PC/TCP, FTP 33  
Pipelining, Advanced Look-ahead 59  
Power during installation 2  
Power management 58  
Product registration card 1  
Protective adapter case 1  
PROTOCOL.INI file 74  
R
Removal, PC Card 4  
Required equipment 2  
RJ-45 connector 2, 5  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I N D E X  
S
Sample files, configuration 60  
Artisoft LANtastic 60  
Banyan VINES 63  
DEC PATHWORKS 64  
Windows for Workgroups 65  
Self test 91  
slots, PC Card 2  
Software updates 119  
SunSoft PC-NFS  
installation 48  
Suspend/resume 58  
SystemSoft Card and Socket Services 101  
T
Troubleshooting 89, 98  
Artisoft LANtastic 104  
checklist 116  
DEC PATHWORKS 104  
Microsoft Windows 95 106  
Microsoft Windows for Workgroups 112  
Novell NetWare 115  
U
Ungermann-Bass Net/One  
installation 51  
V
VINES, Banyan 26  
VLM file decompression 41  
VLM shell 21  
W
Windows 95 8  
Toshiba 13  
Version 4.00.95b (OSR2) 15  
Windows for Workgroups 21, 43  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I NDEX  
ODI driver 44  
removing old installation 46  
with NetWare 44  
Windows NT 18  
Wollongong PathWay Access  
installation 52  
Wollongong PathWay Access for DOS 52  
NDIS driver 52  
ODI driver 53  
World Wide Web 119  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Dishwasher DVG 622 User Manual
Intel Computer Hardware US15W User Manual
JVC CRT Television LCT1445 001A User Manual
JVC VCR HM HDS1U User Manual
Karcher Carpet Cleaner RM 69 ASF User Manual
Kawai Recording Equipment Q 80EX User Manual
Kenmore Refrigerator 2220698 User Manual
Kenwood Stereo System UD 703 User Manual
Keys Fitness Treadmill HT95T CE User Manual
Konica Minolta Printer C200 User Manual