Intel Computer Monitor TPC 1070 User Manual
TPC-1070  
Intel Touch Panel Computer  
with High Luminance 10.4"  
SVGA TFT LCD  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Warranty (2 years)  
Advantech warrants to you, the original purchaser, that each of its prod-  
ucts will be free from defects in materials and workmanship for two years  
from the date of purchase.  
This warranty does not apply to any products which have been repaired or  
altered by persons other than repair personnel authorized by Advantech,  
or which have been subject to misuse, abuse, accident or improper instal-  
lation. Advantech assumes no liability under the terms of this warranty as  
a consequence of such events.  
Because of Advantech’s high quality-control standards and rigorous test-  
ing, most of our customers never need to use our repair service. If an  
Advantech product is defective, it will be repaired or replaced at no  
charge during the warranty period. For out-of-warranty repairs, you will  
be billed according to the cost of replacement materials, service time and  
freight. Please consult your dealer for more details.  
If you think you have a defective product, follow these steps:  
1.  
Collect all the information about the problem encountered. (For  
example, CPU speed, Advantech products used, other hardware  
and software used, etc.) Note anything abnormal and list any  
onscreen messages you get when the problem occurs.  
2.  
3.  
Call your dealer and describe the problem. Please have your man-  
ual, product, and any helpful information readily available.  
If your product is diagnosed as defective, obtain an RMA (return  
merchandize authorization) number from your dealer. This allows  
us to process your return more quickly.  
4.  
5.  
Carefully pack the defective product, a fully-completed Repair and  
Replacement Order Card and a photocopy proof of purchase date  
(such as your sales receipt) in a shippable container. A product  
returned without proof of the purchase date is not eligible for war-  
ranty service.  
Write the RMA number visibly on the outside of the package and  
ship it prepaid to your dealer.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
CE  
This product has passed the CE test for environmental specifications  
when shielded cables are used for external wiring. We recommend the use  
of shielded cables. This kind of cable is available from Advantech. Please  
contact your local supplier for ordering information.  
FCC Class A  
Note: This equipment has been tested and found to comply with the limits  
for a Class A digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environ-  
ment. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instruction  
manual, may cause harmful interference to radio communications. Opera-  
tion of this equipment in a residential area is likely to cause harmful inter-  
ference in which case the user will be required to correct the interference  
at his own expense.  
Technical Support and Assistance  
Step 1. Visit the Advantech web site at www.advantech.com/support  
where you can find the latest information about the product.  
Step 2. Contact your distributor, sales representative, or Advantech's cus-  
tomer service center for technical support if you need additional  
assistance. Please have the following information ready before  
you call:  
- Product name and serial number  
- Description of your peripheral attachments  
- Description of your software (operating system, version, appli-  
cation software, etc.)  
- A complete description of the problem  
- The exact wording of any error messages  
TPC-1070 User Manual  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
1.  
2.  
3.  
Read these safety instructions carefully.  
Keep this User's Manual for later reference.  
Disconnect this equipment from any AC outlet before cleaning.  
Use a damp cloth. Do not use liquid or spray detergents for clean-  
ing.  
4.  
For plug-in equipment, the power outlet socket must be located  
near the equipment and must be easily accessible.  
5.  
6.  
Keep this equipment away from humidity.  
Put this equipment on a reliable surface during installation. Drop-  
ping it or letting it fall may cause damage.  
7.  
8.  
9.  
The openings on the enclosure are for air convection. Protect the  
equipment from overheating. DO NOT COVER THE OPENINGS.  
Make sure the voltage of the power source is correct before con-  
necting the equipment to the power outlet.  
Position the power cord so that people cannot step on it. Do not  
place anything over the power cord.  
10. All cautions and warnings on the equipment should be noted.  
11. If the equipment is not used for a long time, disconnect it from the  
power source to avoid damage by transient overvoltage.  
12. Never pour any liquid into an opening. This may cause fire or elec-  
trical shock.  
13. Never open the equipment. For safety reasons, the equipment  
should be opened only by qualified service personnel.  
14. If one of the following situations arises, get the equipment checked  
by service personnel:  
a. The power cord or plug is damaged.  
b. Liquid has penetrated into the equipment.  
c. The equipment has been exposed to moisture.  
d. The equipment does not work well, or you cannot get it to work  
according to the user's manual.  
e. The equipment has been dropped and damaged.  
f. The equipment has obvious signs of breakage.  
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT  
WHERE THE STORAGE TEMPERATURE MAY GO BELOW -  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM-  
AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A  
CONTROLLED ENVIRONMENT.  
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS  
INCORRECTLY REPLACED. REPLACE ONLY WITH THE  
SAME OR EQUIVALENT TYPE RECOMMENDED BY THE  
MANUFACTURER, DISCARD USED BATTERIES ACCORD-  
ING TO THE MANUFACTURER'S INSTRUCTIONS.  
The sound pressure level at the operator's position according to IEC 704-  
1:1982 is no more than 70 dB (A).  
DISCLAIMER: This set of instructions is given according to IEC 704-1.  
Advantech disclaims all responsibility for the accuracy of any statements  
contained herein.  
Wichtige Sicherheishinweise  
1.  
2.  
3.  
1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.  
Heben Sie diese Anleitung für den späteren Gebrauch auf.  
Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-  
wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient  
ein angefeuchtetes Tuch zur Reinigung.  
4.  
Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und  
leicht zugänglich sein.  
5.  
6.  
Das Gerät ist vor Feuchtigkeit zu schützen.  
Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.  
Ein Kippen oder Fallen könnte Verletzungen hervorrufen.  
7.  
Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät  
vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen  
nicht abgedeckt werden.  
8.  
9.  
Beachten Sie beim. AnschluB an das Stromnetz die AnschluBw-  
erte.  
Verlegen Sie die NetzanschluBleitung so, daB niemand darüber  
fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden.  
10. Alle Hinweise und Warnungen die sich am Geräten befinden sind  
zu beachten.  
TPC-1070 User Manual  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten  
Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-  
nung eine Beschädigung vermieden.  
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder  
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.  
elektrischen Schlag auslösen.  
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele-  
ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff-  
net werden.  
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz  
zu trennen und von einer qualifizierten Servicestelle zu überprüfen:  
a - Netzkabel oder Netzstecker sind beschädigt.  
b - Flüssigkeit ist in das Gerät eingedrungen.  
c - Das Gerät war Feuchtigkeit ausgesetzt.  
d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funk-  
tioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erz-  
ielen.  
e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.  
f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.  
15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der  
Batterie.Ersatz nur durch densellben order einem vom Hersteller  
empfohlene-mahnlichen Typ. Entsorgung gebrauchter Batterien  
navh Angaben des Herstellers.  
16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf  
nicht fach-männische Weise gewechselt wird. Verfangen Sie die  
Batterie nur gleicher oder entsprechender Type, wie vom Hersteller  
empfohlen. Entsorgen Sie Batterien nach Anweisung des Herstell-  
ers.  
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000  
beträgt 70dB(A) oder weiger.  
Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend  
der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die  
Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TPC-1070 User Manual  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Chapter 1 General Information ....................................... 2  
1.1 Introduction....................................................................... 2  
1.2 Specifications .................................................................... 2  
1.2.1 System Kernel ................................................................ 2  
1.2.2 I/O Ports ......................................................................... 3  
1.2.3 Safety and Environment ................................................. 3  
1.3 LCD Specifications ........................................................... 3  
1.4 Touchscreen Specifications............................................... 4  
1.5 Power................................................................................. 4  
1.6 I/O Port Arrangement........................................................ 5  
Figure 1.1:I/O port arrangement .................................... 5  
1.7 Panel Mounting ................................................................. 6  
Figure 1.2:Panel Mounting ............................................ 6  
1.8 Dimensions and cutout...................................................... 7  
Figure 1.3:Dimensions ................................................... 7  
Chapter 2 System Setup.................................................. 10  
Figure 2.1:Install CompactFlash memory card ............ 10  
Figure 2.2:Power connector ......................................... 10  
Figure 2.3:Power receptor and button pin assignments 11  
Figure 2.4:Touchscreen Calibration - 1 ....................... 12  
Figure 2.5:Touchscreen Calibration - 2 ....................... 12  
Chapter 3 System Engine................................................ 14  
Figure 3.1:Main Board Connector ............................... 14  
Chapter 4 Software Configuration ................................ 16  
4.1 Utilities & Drivers........................................................... 16  
4.1.1 Intel Chipset Software Installation Utility ................... 16  
4.1.2 VGA Drivers (Intel(R) Graphics Driver) ..................... 16  
4.1.3 Intel PRO Network Drivers/software .......................... 16  
4.1.4 Advantech COM Driver ............................................... 17  
4.1.5 Touchscreen Driver ...................................................... 17  
4.1.6 Watchdog Timer Driver ............................................... 17  
4.2 Advantech COM Driver Installation............................... 18  
4.3 Watchdog Timer (WDT) Driver Installation .................. 26  
4.3.1 Installing the TPC-1070 Watchdog Timer Driver ....... 27  
4.3.2 How to Use the TPC-1070 Watchdog Timer ............... 32  
Chapter 5 Windows XP Embedded............................... 36  
5.1 EWF ................................................................................ 36  
5.2 HORM............................................................................. 36  
5.3 Advantech Utilities.......................................................... 37  
5.3.1 Version Information ..................................................... 37  
5.3.2 OSLock and OSUnLock .............................................. 38  
ix  
Table of Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3.3 HORM ......................................................................... 38  
Appendix A Serial Port Settings........................................ 40  
A.1 COM1/ COM3 Connector Definition ............................. 40  
A.2 COM4 Setting ................................................................. 40  
Appendix B Watchdog Timer on WinCE ........................ 44  
B.1 DeviceIOControl............................................................. 44  
B.2 How to Use the Control Code ......................................... 46  
B.3 Examples......................................................................... 48  
Appendix C Watchdog Timer Programming................... 52  
C.1 Overview......................................................................... 52  
C.2 Watchdog Timer Programming....................................... 53  
Figure C.1:Watchdog timer programming procedure .. 53  
Table C.1:Watchdog Timer Registers ......................... 54  
C.3 Example Programs .......................................................... 55  
Appendix D Accessory Kit Assembly................................ 62  
D.1 CompactFlash to IDE Transfer Kit ................................. 62  
Figure D.1:Adapter Board and IDE Cable ................... 62  
Figure D.2:Connecting Adapter Board & IDE Cable .. 62  
Figure D.3:CompactFlash Slot .................................... 63  
Figure D.4:Insert the Adapter Board into the CF slot .. 63  
Figure D.5:Inserted Adapter Board ............................. 63  
Figure D.6:Connect the CD-ROM via the IDE Cable . 64  
Figure D.7:Plug Power Line into CD-ROM Drive ...... 64  
D.2 USB Driver Installation Notice....................................... 64  
Appendix E HDD Kit Assembly........................................ 66  
Figure E.1:Removing the Rear HDD Cover ................ 66  
Figure E.2:Removing the Top Screws ......................... 66  
Figure E.3:Installing the HDD ..................................... 66  
Appendix F Touchscreen Installation & Configuration. 68  
F.1 Driver Installation ........................................................... 68  
Figure F.1:Setup.exe .................................................... 68  
Figure F.2:Install - Wizard .......................................... 68  
Figure F.3:Install – License Agreement ...................... 69  
Figure F.4:Install – Completed .................................... 69  
F.2 Uninstall the Driver......................................................... 70  
Figure F.5:Uninstall -1 ................................................. 70  
Figure F.6:Uninstall -2 ................................................. 70  
Figure F.7:Uninstall -3 ................................................. 71  
F.3 Touchscreen Calibration ................................................. 71  
Figure F.8:Standard Calibration -1 .............................. 72  
Figure F.9:Standard Calibration -2 .............................. 72  
Figure F.10:Standard Calibration -3 ............................ 73  
Figure F.11:Advanced Calibration -1 ......................... 74  
Figure F.12:Advanced Calibration -2 .......................... 74  
TPC-1070 User Manual  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure F.13:Plot Calibration Data ................................ 75  
Figure F.14:Draw ........................................................ 76  
Figure F.15:Clear Screen ............................................. 76  
Figure F.16:Option ...................................................... 77  
Appendix G Fuse Specifications ........................................ 80  
G.1 Fuse Specifications.......................................................... 80  
G.2 Fuse Replacement ........................................................... 80  
Figure G.1:Fuse Replacement ...................................... 80  
xi  
Table of Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TPC-1070 User Manual  
xii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
1
General Information  
Sections include:  
• Introduction  
• Specifications  
• LCD Specifications  
• Touchscreen Specifications  
• Power  
• I/O Ports Arrangement  
• Panel Mounting  
• Dimensions & Cutout  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 General Information  
This chapter gives the background information about the TPC-1070.  
1.1 Introduction  
The TPC-1070 touch panel computer is state-of-the-art HMI (Human  
Machine Interface). This 10.4” display operator interface is an x86-based  
platform with these key features:  
Fanless:  
By using a low power processor, the system does not have to rely on fans,  
which often are unreliable, and causes dust to circulate inside the equip-  
ment.  
Bright Display:  
The bright TFT LCD display suits industrial demands for clear interfaces.  
Powerful Communication Capability:  
The TPC-1070 provides powerful IO interface for easily communicating  
with other devices. The IO interface includes serial ports, RS-485 port,  
parallel port, Ethernet and USB 2.0 support.  
Embedded Windows Support:  
In addition to the OS support of Windows 2000 and Windows XP,  
Advantech offers platform support for Windows CE and XP embedded.  
1.2 Specifications  
1.2.1 System Kernel  
CPU: Intel Pentium M, Celeron M (clock rate 1.4GHz/ 1GHz)  
BIOS: Award 4Mbit flash memory  
South Bridge: Intel 855GME  
VGA: VGA: Intel 855GME  
Ethernet: TPC-1070H-P1E (LAN1: Intel 82562, LAN2: Intel 82541);  
TPC-1070H-C1E (LAN1: Intel 82562, LAN: Intel 82551)  
Watchdog timer: W83627 watchdog timer; 1.6 second timeout period  
IDE: 2 EIDE channels support one IDE compact flash socket on board  
and one 44 pin (2mm) connector.  
TPC-1070 User Manual  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1.2.2 I/O Ports  
3 serial ports: RS-232 (COM1, COM3) and RS-232/422/485 (COM4)  
2 RJ-45 Ethernet port:  
TPC-1070H-P1E, LAN 1(10/100BaseT); LAN 2(10/100/1000BaseT)  
TPC-1070H-C1E, LAN 1(10/100BaseT); LAN 2(10/100BaseT)  
1 PS/2 port: 6-pin mini-DIN ports for keyboard and mouse  
2 USB ports: compliant with USB 2.0  
1 Compact Flash Slot: TypeII  
1 PCI-104  
1.2.3 Safety and Environment  
Safety  
FCC Class A and CE certificated  
BSMI certificated  
The front bezel is compliant with NEMA 4  
Environment  
Operating Temperature: 0~50 degrees Celsius  
Storage temperature: -20~60 degrees Celsius  
Humidity: 10~95% @ 40 relative humidity (non-condensing)  
Vibration: 1Grms (5~500Hz)  
3
Chapter1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.3 LCD Specifications  
TFT color LCD  
Display Type  
10.4”  
Size (diagonal)  
800 x 600 (SVGA)  
Maximum Resolution  
Maximum colors  
Pixel Pitch (W x H)  
Viewing Angle  
260K  
0.264 x 0.264 mm  
-70~70° (H), -60~50° (V); CR>=10  
400  
2
Luminance (cd / m )  
500  
Contrast Ratio  
-20~70° C (Ambient)  
2 CCFL  
Operating Temperature  
Backlight  
50,000 hours  
Backlight Life Time  
Note  
There might be several bright or dark pixels on the  
LCD. This comes from the production of the LCD.  
Such phenomenon is claimed to be normal accord-  
ing to the LCD manufacturers.  
TPC-1070 User Manual  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1.4 Touchscreen Specifications  
Resistive  
Touchscreen Type  
Base Glass Construction  
Resolution  
Tempered Glass  
1024 x 1024  
75% typical  
Light Transmission  
Controller  
RS232 Interface  
3.3 to 5V  
Power Rating  
100 million touches  
Durability  
1.5 Power  
Input voltage: 18 ~ 32 Vdc (the fuse will be open circuit as input level  
exceeds 33Vdc)  
Typical: 24V@2.5A (60W)  
5
Chapter1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.6 I/O Port Arrangement  
The arrangement of the I/O ports is shown in Figure 1.1.  
Figure 1.1: I/O port arrangement  
TPC-1070 User Manual  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.7 Panel Mounting  
1. There is a piece of adhesive waterproof gasket on the Mg-AL  
front bezel. Make sure the waterproof gasket is in position  
before installing the TPC-1070 to the panel opening.  
2. Install the TPC-1070 to the panel opening.  
3. Find out the eight clampers and eight long screws in the  
accessory pack. Hook those clampers to those holes around the  
four sides of the bezel. Insert the screws to every clamper and  
fasten them. These screws will then push on the mounting panel  
and fix the unit.  
4. The mounting panel thickness is suggested to be less than 10mm  
(0.236 inch).  
Figure 1.2: Panel Mounting  
7
Chapter1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.8 Dimensions & Cutout  
Weight:: 3.5 Kg (without HDD)  
Dimensions: 286 x 226 x 58mm (WxHxD)  
Cutout: 279.5 x 219.5 mm (suggested)  
Figure 1.3: Dimensions  
TPC-1070 User Manual  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
2
System Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 System Setup  
This chapter provides a brief explanation for operating the TPC-1070. It  
is easy to make the TPC-1070 start working with the below step-by-step.  
Step 1: Unpack the TPC-1070 package. Please check the packing list at  
the beginning of this manual.  
Step 2: Install a CompactFlash containing windows CE, embedded Win-  
dows XP or other operating system.  
Figure 2.1: Install CompactFlash memory card  
Warning  
It is suggested to turn OFF system power as plug in  
or pull out the memory card, though the Compact-  
Flash memory is supposed to be hot swappable.  
Step 3: Connect the power connector to the 24VDC power lines. The  
power lines can either be of some power adapter or in-house power  
source.  
Figure 2.2: Power connector  
TPC-1070 User Manual  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Figure 2.3: Power receptor and button pin assignments  
Step 4: Plug the power lines to the system power receptor.  
Step 5: Push the power button to power on the system as the figure 2.4.  
Step 6: Calibrate the touchscreen. Please go to:  
“Start”Æ”Settings”Æ”Control Panel” as the figure 2.5. Then, click the  
tab “Stylus -> "Calibration" -> "Recalibrate” to calibrate by selecting the  
standard calibration or advanced calibration.  
If your operating system is Windows CE, the details of the procedure are  
described in following section.  
11  
Chapter2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Figure 2.4: Touchscreen Calibration - 1  
Figure 2.5: Touchscreen Calibration - 2  
TPC-1070 User Manual  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
3
System Engine  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 System Engine  
Main Board Connector and Jumper Setting List  
Label  
CN5  
CN6  
CN7  
CN8  
CN9  
CN10  
CN11  
CN12  
CN13  
COM4  
COM5  
COM6  
RJ4  
Function  
Description  
LVDS LCD  
LCD POWER  
TOUCH  
Internal 18bit LVDS LCD Connector  
LCD INVERTER Connector  
Internal Touch screen Connector  
PCI-104  
IDE connector for 40pin 2.5îinternal HDD  
DC Power in Connector, HOUSING 5.08 MM 3P  
Two USB Type-A Female to on panel.  
PS/2 connector for KB/MS  
Compact-Flash socket  
Serial port:COM1 RS232  
Serial port:COM2 RS232  
Serial port:COM3 RS232/422/485  
ICH4M+82562EZ 10/100  
10/100 82551QM / GIGA 82541PI  
Battery socket  
PCI-104  
IDE Connector  
PWR DC IN  
USB  
PS/2 KB/MS  
CF  
COM1  
COM2  
COM3  
LAN1  
LAN2  
Battery  
PCI-104 PWR  
CLEAR CMOS  
I2C  
RJ5  
BH4  
JP5  
JP6  
J4  
Selection of PCI-104 Power  
CLEAR CMOS  
I2C connector  
S4  
S5  
S6  
SP4  
SW4  
SW5  
COM4 MODE1  
COM4 MODE2  
IRQ selection  
Buzzer  
POWER SWITCH  
Address selection  
Setting COM4 RS232/422/485 mode  
Setting COM4 RS422 Master or Slave mode  
IRQ selection for CAN circuit  
Buzzer socket  
System Power Switch  
Address selection for CAN circuit  
Figure 3.1: Main Board Connector  
TPC-1070 User Manual  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
4
Software Configuration  
Sections include:  
• Utilities & Drivers  
• Advantech COM Driver Installation  
• Watchdog Timer Driver Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 Software Configuration  
A support CD-ROM for TPC-1070 is available and along with the prod-  
uct. There are related utilities and drivers for TPC-1070 included. Please  
install the Chipset INF driver, VGA graphics driver, LAN driver, audio  
driver, Advantech.com driver, Touchscreen driver and Watchdog Timer  
(WDT) driver sequentially.  
4.1 Utilities & Drivers  
The following utilities and drivers are provided for TPC-1070. You can  
also find the updated utilities and drivers from the support website.  
4.1.1 Intel Chipset Software Installation Utility  
Path: \TPC-1070H\Driver\INF\English (for English version)  
\TPC-1070H\Driver\INF\Multilanguage (for Multilanguage)  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
4.1.2 VGA Drivers (Intel(R) Graphics Driver)  
Path: \TPC-1070H\Driver\VGA\  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
4.1.3 Intel PRO Network Drivers/software  
Path: \TPC-1070H\Driver\LAN\  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
TPC-1070 User Manual  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
4.1.4 Advantech COM Driver  
Path: \TPC-1070H\Driver\Advantech COM\  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
4.1.5 Touchscreen Driver  
Path: \TPC-1070H\Driver\PenMount\  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
4.1.6 Watchdog Timer Driver  
Path: \TPC-1070H\Driver\WDT\8362x  
Available for the OS’s below:  
• Microsoft Windows 2000  
• Microsoft Windows XP  
17  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4.2 Advantech COM Driver Installation  
A com port named COM3 or COM4 on TPC-1070 is Advantech Special  
com port. Please follow the steps below to install the driver.  
Step 1: Insert the companion CD-ROM into your CD-ROM drive. Open  
the directory: \TPC-1070H\Driver\Advantech COM\  
Step 2: Use Windows Explorer (or Windows Run command) to execute  
PCI_ICOM.EXE from the companion CD-ROM.  
TPC-1070 User Manual  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3: Click Next to continue installation.  
Step 4: Click Next to continue installation.  
19  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5: Click uninstall icon to remove ?PCI Serial Port  
TPC-1070 User Manual  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 6: Click the scan for hardware changes icon to remove ?PCI Serial  
Port  
21  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 7: Found New Hardware and Click Next to continue installation.  
TPC-1070 User Manual  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 8: Click Finish the Advantech PCI Serial Port to continue.  
Step 9: Then, found New Hardware and Click Next to continue.  
23  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 10: Click Finish the Advantech PCI-1602 Serial SlaveBridge to  
continue installation.  
TPC-1070 User Manual  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 11: Found New Hardware and Click Next to continue installation.  
Step 12: Click Finish the Advantech PCI Serial Port to continue.  
25  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3 Watchdog Timer (WDT) Driver Installation  
In order to ensure reliable and fail-safe performance, TPC-1070 has a  
built-in Watchdog Timer to handle unexpected system failures. TPC-  
1070 provides the drivers and a utility to activate and configure the timer  
for Windows2000/XP operating systems. The following is a brief intro-  
duction, using Windows2000 as an example, for the installation and con-  
figuration procedures.  
TPC-1070 User Manual  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4.3.1 Installing the TPC-1070 Watchdog Timer Driver  
Step 1: Insert the companion CD-ROM into your CD-ROM drive. Open  
the directory: \WDT\8362x\W2K_XP.  
Step 2: Use Windows Explorer (or Windows Run command) to execute  
SETUP.EXE from the companion CD-ROM.  
27  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3: Click Next to proceed.  
TPC-1070 User Manual  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4: Click Next to confirm the customer information.  
Step 5: Select Advantech [W83627HF] Watchdog Timer and click Next.  
.
29  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 6: Click Next to confirm selecting the Typical setup type.  
Step 7: Click Next to proceed.  
TPC-1070 User Manual  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 8: Click Finish to complete the procedure.  
Step 9: Click OK to restart the system and activate the Watchdog Timer.  
31  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3.2 How to Use the TPC-1070 Watchdog Timer  
Step 1: Open the Control Panel, click Watchdog Service Configuration.  
Step 2: Click the Start Service button.  
TPC-1070 User Manual  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3: Click Setting to select the setting page.  
Step 4: Select the Timer Span that meets your application requirement.  
33  
Chapter4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5: Click Enable to enable the setting.  
Step 6: Check the Start watchdog service on boot to enable the Watchdog  
timer to start automatically after the system boots every time.  
Step 7: Click OK, then the configuration procedure is finished.  
Note  
Use Advantech WDT Driver.WDT was  
enable,and WDT LED was 1Hz glisten.  
TPC-1070 User Manual  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
5
Windows XP Embedded  
Sections include:  
• EWF  
• HORM  
• Advantech Utilities  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5 Windows XP Embedded  
TPC-1070 is in support of embedded windows platform. This section is  
to state the important features, EWF and HORN, provided in windows  
XP embedded.  
5.1 EWF  
EWF stands for Enhanced Write Filter. It provides an upper filter in the  
storage device driver stack that redirects disk write operations to volatile  
(RAM) or non-volatile (disk) storage. EWF protects a volume from write  
access. The benefits are as the following.  
Write-protect one or more partitions on your system.  
Enable read-only media, such as CD-ROM or flash, to boot and run.  
Prolong the lifespan of write-sensitive storage, such as CompactFlash.  
TPC-1070 XPE provides EWF RAM RDG mode on system partition. All  
wirte to system partition will be redirected to RMA once this mode is  
enabled. This mode is manually enabled by customers after they finish  
all their changes on system such as installing their applications or adjust-  
ing system setting.  
Advantech provides a pair of utilities to operate EWF, OSLock and  
OSUnLock. The setting is stated in the section later.  
5.2 HORM  
HORM stands for Hibernate Once Resume Many. In HORM environ-  
ment, a single hibernation file is used to boot the system repeatedly. To  
set a HORM environment, please follow the steps below.  
Please make sure EWF is disabled. You can run OSUnLock to disable  
EWF.  
Enable hibernation support:  
Run ‘power options’ in control panel, and then select ‘Enable Hiberna-  
tion’ in hibernation pane.  
TPC-1070 User Manual  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Enable EWF:  
Run OSLock, and then system reboot automatically.  
Open those software that customers want to directly use after system  
resume from hibernation.  
Hibernate via Advantech HORM utility:  
Please Click Start Menu->All Programs->Advantech->HORM  
HORM environment remains all along unless the following events occur:  
Run EWF commit command (ewfmgr c: -commit) and then reboot sys-  
tem.  
Select “Discard hibernation file” by clicking F8 when system is starting  
up  
Also, HORM cannot fit your system if free space in C partition is not  
enough. The hibernation file required is dependent on the RAM size you  
use on the system. In other words, the hibernation file is 512MB that is  
the same as memory size used on TPC-1070H-P1E or TPC-1070H-C1E.  
5.3 Advantech Utilities  
TPC-1070 provides the useful utilities for users to configure the HORM  
and EWF.  
5.3.1 Version Information  
Start menu-> All Programs -> Advantech  
This states the current XPE runtime information including hardware plat-  
form, version, build number, release date, XPE QFEs installed in compo-  
nent database and XP Pro Patches you installed manually.  
37  
Chapter5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5.3.2 OSLock and OSUnLock  
The two utilities assist users to enable or disable EWF. Please go to Start  
Menu-> All Programs-> Advantech. The default setting of EWF is dis-  
abled. Users can protect C partition from any disk writing via OSLock  
that is to enable EWF RAM REG Mode. In this mode, any changes on C  
partition including modification on files or registry will be redirected to  
memory, thus these changes will be discarded in the next system startup.  
To exit this environment is via OSUnLock. Please visit MSDN website  
for further information about EWF.  
5.3.3 HORM  
This is to create HORM environment. Please go to Start Menu-> All Pro-  
grams-> Advantech. This utility firstly dismounts all local physical vol-  
umes that are not protected by EWF. It requires users to input the volume  
list.  
Please follow the steps before running this utility to create full HORM  
environment.  
Enable Hibernation via Power Options in Control Panel  
Make C: partition EWF-enabled via OSLock  
Make sure that all volumes to be dismounted are not in use.  
TPC-1070 User Manual  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
A
Serial Port Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A Serial Port Settings  
A.1 COM1/ COM3 Connector Definition  
1
5
6
9
Pin  
Signal  
1
2
3
4
5
6
7
8
9
NDCD  
NRX  
NTX  
NDTR  
GND  
NDSR  
NRTS  
NCTS  
NRI  
A.2 COM4 Setting  
The serial port COM4 on the TPC-1070 is adjustable. It can be set to RS-  
232, RS-422 or RS-485. This port is designed with auto data flow control  
capability. In other word, the TPC-1070 can automatically detect the data  
flow direction at this port when the two wired RS-485 communication is  
activated.  
TPC-1070 User Manual  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1
5
6
9
Note:  
S4  
indicates the switch jumper  
S5  
0
9
9
9
9
8
8
8
8
7
7
7
7
6
6
6
6
5
5
5
5
4
4
4
4
3
3
3
3
2
2
2
2
1
2
1
RS232  
ON  
ON  
S4  
S5  
2
0
1
1
RS485  
ON  
ON  
S4  
0
S5  
2
1
1
RS422-MASTER  
ON  
ON  
S4  
0
S5  
2
1
1
RS422-SLAVE  
ON  
ON  
PIN  
RS-232  
RS-422  
RS-485  
1
2
3
4
5
6
7
8
9
NDCD  
NRX  
NTX  
NDTR  
GND  
NDSR  
NRTS  
NCTS  
NRI  
TX-  
D-  
D+  
TX+  
RX+  
RX-  
41  
AppendixA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TPC-1070 User Manual  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
B
Watchdog Timer  
on WinCE 5.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Watchdog Timer on WinCE  
There is a built-in Watchdog timer on Windows CE 5.0 for TPC-1070. You  
can access it through WIN32 API. TPC-1070 provides a WDT driver to  
allow users to enable/disable the Watchdog timer. The driver name is  
“WDT1:”. Programmers must open this driver before using the resources.  
Then programmers can use DeviceIOControl functions to enable/disable  
Watchdog timer. The introduction below includes the DeviceIOControl, the  
definition of the parameter and an example.  
B.1 DeviceIOControl  
This function sends a control code directly to a specified device driver,  
causing the corresponding device to perform the specified operation.  
BOOL DeviceIoControl(  
HANDLE hDevice,  
DWORD dwIoControlCode,  
LPVOID lpInBuffer,  
DWORD nInBufferSize,  
LPVOID lpOutBuffer,  
DWORD nOutBufferSize,  
LPDWORD lpBytesReturned,  
LPOVERLAPPED lpOverlapped );  
Parameters:  
hDevice  
[in] Handle to the device that is to perform the operation. Call the Create-  
File function to obtain a device handle.  
dwIoControlCode  
[in] Specifies the control code for the operation. This value identifies the  
specific operation to be performed and the type of device on which the  
operation is to be performed. No specific values are defined for the dwIo-  
ControlCode parameter. However, the writer of a custom device driver can  
define IOCTL_XXXX control codes, per the CTL_CODE macro. These  
TPC-1070 User Manual  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
control codes can then be advertised, and an application can use these  
control codes with DeviceIoControl to perform driverspecific functions.  
lpInBuffer  
[in] Long pointer to a buffer that contains the data required to perform the  
operation. This parameter can be NULL if the dwIoControlCode parame-  
ter specifies an operation that does not require input data.  
nInBufferSize  
[in] Size, in bytes, of the buffer pointed to by lpInBuffer.  
lpOutBuffer  
[out] Long pointer to a buffer that receives the operation.s output data.  
This parameter can be NULL if the dwIoControlCode parameter specifies  
an operation that does not produce output data.  
nOutBufferSize  
[in] Size, in bytes, of the buffer pointed to by lpOutBuffer.  
lpBytesReturned  
[out] Long pointer to a variable that receives the size, in bytes, of the data  
stored into the buffer pointed to by lpOutBuffer. The lpBytesReturned  
parameter cannot be NULL. Even when an operation produces no output  
data, and lpOutBuffer can be NULL, the DeviceIoControl function makes  
use of the variable pointed to bylpBytesReturned. After such an opera-  
tion, the value of the variable is without meaning.  
lpOverlapped  
[in] Ignored; set to NULL.  
Return Values  
Nonzero indicates success. Zero indicates failure. To get extended error  
information, call GetLastError.  
45  
AppendixB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B.2 How to Use the Control Code  
There are 6 control codes for the operation codes in the WDT driver.  
IOCTL _WDT_ENABLE:  
Enables the Watchdog timer on your application. By default, if the  
Watchdog timer is enabled, the WDT driver will automatically trigger  
itself after the specified period and your application does not need to trig-  
ger the Watchdog timer in this situation.  
lpInBuffer : unused.  
nInBufferSize: unused.  
lpOutBuffer: unused.  
nOutBufferSize: unused.  
IOCTL _WDT_DISABLE:  
Disables the Watchdog time on your application.  
lpInBuffer : unsed.  
nInBufferSize: unused.  
lpOutBuffer: unused.  
nOutBufferSize: unused.  
IOCTL_WDT_STROBE:  
Triggers the Watchdog. If your application uses IOCTL_WDT_ENABLE  
to enable the Watchdog first and then sends IOCTL_WDT_REBOOT to  
the WDT driver, your application must trigger the Watchdog once during  
the Watchdog timer period. If your application has not triggered at the  
specified period, the device will reboot automatically.  
lpInBuffer: unused.  
nInBufferSize: unused.  
lpOutBuffer: unused.  
nOutBufferSize: unused.  
TPC-1070 User Manual  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IOCTL_WDT_GETTIMEOUT:  
Gets the Watchdog time setting.  
lpInBuffer: unused.  
nInBufferSize: unused.  
lpOutBuffer: The DWORD pointer to your Watchdog time setting. The  
Watchdog time setting is just a number. 0 means 2 seconds, 1 means 5  
seconds, 2 means 10 seconds, 3 means 15 seconds, 4 means 30 seconds, 5  
means 45 seconds and 6 means 60 seconds. The default setting is 5 sec-  
onds.  
nOutBufferSize: unused.  
IOCTL_WDT_SETTIMEOUT:  
Sets the Watchdog time setting.  
lpInBuffer : The DWORD pointer to your Watchdog time setting. The  
Watchdog time setting is just a number. 0 means 2 seconds, 1 means 5  
seconds, 2 means 10 seconds, 3 means 15 seconds, 4 means 30 seconds, 5  
means 45 seconds and 6 means 60 seconds. The default setting is 5 sec-  
onds.  
nInBufferSize:.unused.  
lpOutBuffer: unused.  
nOutBufferSize: unused.  
IOCTL_WDT_REBOOT:  
If you want your application to trigger the Watchdog by itself, please use  
IOCTL_WDT_REBOOT to notify the WDT driver. Otherwise, the WDT  
will trigger itself automatically.  
lpInBuffer :unused.  
nInBufferSize: unused.  
lpOutBuffer: unused.  
nOutBufferSize: unused.  
47  
AppendixB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B.3 Examples  
#define WDT_CODE(ID)  
CTL_CODE(FILE_DEVICE_UNKNOWN,ID,  
METHOD_BUFFERED, FILE_ANY_ACCESS)  
#define IOCTL_WDT_ENABLE WDT_CODE (0x900)  
#define IOCTL_WDT_DISABLE WDT_CODE(0x901)  
#define IOCTL_WDT_STROBE WDT_CODE(0x902)  
#define IOCTL_WDT_GET_TIMEOUT WDT_CODE(0x903)  
#define IOCTL_WDT_SET_TIMEOUT WDT_CODE(0x904)  
#define IOCTL_WDT_REBOOT WDT_CODE(0x905)  
// for compatibility reasons, you can define IOCTL as below:  
// #define IOCTL_WDT_ENABLE 0x1001  
// #define IOCTL_WDT_DISABLE 0x1002  
// #define IOCTL_WDT_STROBE 0x1003  
// #define IOCTL_WDT_GETTIMEOUT 0x1004  
// #define IOCTL_WDT_SETTIMEOUT 0x1005  
// #define IOCTL_WDT_REBOOT 0x1006  
HANDLE m_hWDT=NULL;  
TCHAR szClassName[60];  
// assign the WDT driver name  
wsprintf(szClassName, TEXT("WDT1:"));  
// Open the WDT driver  
m_hWDT = CreateFile(szClassName, GENERIC_READ  
GENERIC_WRITE, 0, NULL, OPEN_EXISTING,  
FILE_ATTRIBUTE_NORMAL, NULL);  
if ( m_hWDT == INVALID_HANDLE_VALUE ) {  
DebugMsg(CString("WDT driver fail"));  
return;  
}
DWORD dwTemp;  
DWORD nIndex=2;  
TPC-1070 User Manual  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
// Set the Watchdog Timer as 10 seconds. Number 2 means 10 seconds.  
DeviceIoControl(m_hWDT, IOCTL_WDT_SET_TIMEOUT, &nIndex,  
sizeof(nIndex), NULL, 0, &dwTemp, NULL);  
// Enable the Watchdog timer  
DeviceIoControl(m_hWDT, IOCTL_WDT_ENABLE, NULL, 0, NULL,  
0, &dwTemp, NULL);  
While (1) {  
// do your job here.  
Sleep(8000);  
DeviceIoControl(m_hWDT, IOCTL_WDT_STROBE, NULL,0,  
NULL, 0, &dwTemp, NULL);  
}
DeviceIoControl(m_hWDT, IOCTL_WDT_DISABLE, NULL, , NULL,  
0, &dwTemp, NULL);  
CloseHandle(m_hWDT);  
49  
AppendixB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TPC-1070 User Manual  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
C
Watchdog Timer  
Programming  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C Watchdog Timer  
Programming  
C.1 Overview  
The TPC-1070 cards’ watchdog timer can be used to monitor system soft-  
ware operation and take corrective action if the software fails to function  
after the programmed period. This section describes the operation of the  
watchdog timer, and how to program it.  
The watchdog timer is built into the super I/O controller W83627HF. It  
provides the following functions for user programming:  
• Can be enabled and disabled by user's program.  
• Timer can be set from 1 to 255 seconds or 1 to 255 minutes.  
• Generates an interrupt or resets signal if the software fails to reset the  
timer after time-out.  
TPC-1070 User Manual  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
C.2 Watchdog Timer Programming  
The I/O port address of the watchdog timer is 2E(hex) and 2F(hex), 2E  
(hex) is the address port. 2F(hex) is the data port. You must first assign  
the address of register by writing address value into address port 2E(hex),  
then write/read data to/from the assigned register through data port 2F  
(hex).  
Figure C.1: Watchdog timer programming procedure  
53  
ChapterC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Table C.1: Watchdog Timer Registers  
Address of  
Attribute  
Description  
register (2E)  
Read/Write  
87 (hex)  
07 (hex)  
30 (hex)  
F5 (hex)  
Value (2F)  
and  
description  
-----  
Write this address to I/O address  
port 2E (hex) twice to unlock the  
W83627HF  
write  
write  
write  
Write 08 (hex) to select register of  
watchdog timer.  
Write 01 (hex) to enable the function  
of the watchdog timer. Disabled is  
set as default.  
Set seconds or minutes as units for  
the timer.  
Write 0 to bit 3: set second as counting unit. [default]  
Write 1 to bit 3: set minute as counting unit  
F6 (hex)  
write  
0: stop timer [default]01~FF (hex):  
The amount of the count, in seconds  
or minutes, depends on the value  
set in register F5 (hex). This number  
decides how long the watchdog  
timer waits for strobe before gener-  
ating an interrupt or reset signal.  
Writing a new value to this register  
can reset the timer to count with the  
new value.  
F7 (hex)  
rd/wr  
Bit 6: Write 1 to enable keyboard to  
reset the timer, 0 to disable.[default]  
Bit 5: Write 1 to generate a timeout  
signal immediately and automati-  
cally return to 0. [default=0] Bit 4:  
Read status of watchdog timer, 1  
means timer is "time out".  
AA (hex)  
-----  
Write this address to I/O port 2E  
(hex) to lock the watchdog timer.2  
TPC-1070 User Manual  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
C.3 Example Programs  
1. Enable watchdog timer and set 10 sec. as timeout interval  
;-----------------------------------------------------------  
Mov dx,2eh ; Unlock W83627HF  
Mov al,87h  
Out dx,al  
Out dx,al  
;-----------------------------------------------------------  
Mov al,07h ; Select registers of watchdog timer  
Out dx,al  
Inc dx  
Mov al,08h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Enable the function of watchdog timer  
Mov al,30h  
Out dx,al  
Inc dx  
Mov al,01h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Set second as counting unit  
Mov al,0f5h  
Out dx,al  
Inc dx  
In al,dx  
And al,not 08h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Set timeout interval as 10 seconds and start counting  
Mov al,0f6h  
55  
ChapterC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Out dx,al  
Inc dx  
Mov al,10  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; lock W83627HF  
Mov al,0aah  
Out dx,al  
2. Enable watchdog timer and set 5 minutes as timeout interval  
;-----------------------------------------------------------  
Mov dx,2eh ; unlock W83627H  
Mov al,87h  
Out dx,al  
Out dx,al  
;-----------------------------------------------------------  
Mov al,07h ; Select registers of watchdog timer  
Out dx,al  
Inc dx  
Mov al,08h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Enable the function of watchdog timer  
Mov al,30h  
Out dx,al  
Inc dx  
Mov al,01h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Set minute as counting unit  
Mov al,0f5h  
TPC-1070 User Manual  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Out dx,al  
Inc dx  
In al,dx  
Or al,08h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Set timeout interval as 5 minutes and start counting  
Mov al,0f6h  
Out dx,al  
Inc dx  
Mov al,5  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; lock W83627HF  
Mov al,0aah  
Out dx,al  
3. Enable watchdog timer to be reset by mouse  
;-----------------------------------------------------------  
Mov dx,2eh ; unlock W83627H  
Mov al,87h  
Out dx,al  
Out dx,al  
;-----------------------------------------------------------  
Mov al,07h ; Select registers of watchdog timer  
Out dx,al  
Inc dx  
Mov al,08h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Enable the function of watchdog timer  
57  
ChapterC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mov al,30h  
Out dx,al  
Inc dx  
Mov al,01h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Enable watchdog timer to be reset by mouse  
Mov al,0f7h  
Out dx,al  
Inc dx  
In al,dx  
Or al,80h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; lock W83627HF  
Mov al,0aah  
Out dx,al  
4. Enable watchdog timer to be reset by keyboard  
;-----------------------------------------------------------  
Mov dx,2eh ; unlock W83627H  
Mov al,87h  
Out dx,al  
Out dx,al  
;-----------------------------------------------------------  
Mov al,07h ; Select registers of watchdog timer  
Out dx,al  
Inc dx  
Mov al,08h  
Out dx,al  
;-----------------------------------------------------------  
TPC-1070 User Manual  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dec dx ; Enable the function of watchdog timer  
Mov al,30h  
Out dx,al  
Inc dx  
Mov al,01h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Enable watchdog timer to be strobed reset by keyboard  
Mov al,0f7h  
Out dx,al  
Inc dx  
In al,dx  
Or al,40h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; lock W83627HF  
Mov al,0aah  
Out dx,al  
5. Generate a time-out signal without timer counting  
;-----------------------------------------------------------  
Mov dx,2eh ; unlock W83627H  
Mov al,87h  
Out dx,al  
Out dx,al  
;-----------------------------------------------------------  
Mov al,07h ; Select registers of watchdog timer  
Out dx,al  
Inc dx  
Mov al,08h  
Out dx,al  
59  
ChapterC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
;-----------------------------------------------------------  
Dec dx ; Enable the function of watchdog timer  
Mov al,30h  
Out dx,al  
Inc dx  
Mov al,01h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; Generate a time-out signal  
Mov al,0f7h  
Out dx,al ;Write 1 to bit 5 of F7 register  
Inc dx  
In al,dx  
Or al,20h  
Out dx,al  
;-----------------------------------------------------------  
Dec dx ; lock W83627HF  
Mov al,0aah  
Out dx,al  
TPC-1070 User Manual  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
D
Accessory Kit  
Assembly  
This appendix shows how to connect to  
a CD-ROM via the CompactFlash slot.:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D Accessory Kit Assembly  
D.1 CompactFlash to IDE Transfer Kit  
Please follow this assembly procedure to use the CompactFlash slot to  
connect with a CD-ROM drive.  
1.  
Connect the IDE cable to the adapter board.  
Figure D.1: Adapter Board and IDE Cable  
Figure D.2: Connecting Adapter Board & IDE Cable  
TPC-1070 User Manual  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Note  
Pin 1 is marked red  
2.  
Insert the adapter board into the CompactFlash slot.  
Figure D.3: CompactFlash Slot  
Figure D.4: Insert the Adapter Board into the CF slot  
Figure D.5: Inserted Adapter Board  
63  
AppendixD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connect the CD-ROM to the adapter board via the IDE cable and then  
connect the external power line to the CD-ROM.  
Figure D.6: Connect the CD-ROM via the IDE Cable  
Figure D.7: Plug Power Line into CD-ROM Drive  
D.2 USB Driver Installation Notice  
It is required to install the service pack if you want to install the USB 2.0  
driver on Windows 2000/XP  
Note  
Please make sure Windows 2000 Service Pack  
4 is installed before you install the USB 2.0  
driver on Windows 2000. Service Pack 1 must  
be installed on Windows XP before you install  
the USB 2.0 driver.  
TPC-1070 User Manual  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2
E
HDD Kit Assembly  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix E HDD Kit Assembly  
Please follow the assembly procedure to install the HDD into the system.  
1.  
Remove the rear HDD cover.  
Figure E.1: Removing the Rear HDD Cover  
2.  
Deassemble the HDD kit from the system and remove the screws.  
Figure E.2: Removing the Top Screws  
3.  
Put the HDD into the HDD holder and fasten the screws and the  
HDD bracket..  
Figure E.3: Installing the HDD  
TPC-1070 User Manual  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2
F
Touchscreen  
Installation &  
Configuration  
This appedix demonstrates how to  
install the PenMount 9000 touchscreen  
and set the configuration on TPC-  
1260H. This section uses Windows XP  
as an example.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix F Touchscreen Installation &  
Configuration  
F.1 Driver Installation  
Please insert the x86 TPC series support CD and go to the Windows  
2000-XP driver folder (TPC-1070\Driver\Touch Screen\Driver\Windows  
2000-XP Driver V4.01). Click setup.exe  
Figure F.1: Setup.exe  
The screen displays the installation wizard for the PenMount software.  
Click “Next”. Follow the installation wizard step by step.  
Figure F.2: Install - Wizard  
TPC-1070 User Manual  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Figure F.3: Install – License Agreement  
Figure F.4: Install – Completed  
69  
AppendixF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
F.2 Uninstall the Driver  
Please go to Settings and then select Control Panel. Please click Add/  
Remove Programs.  
Figure F.5: Uninstall -1  
Select PenMount DMC9000 and DMC9100. Click Remove button.  
Figure F.6: Uninstall -2  
TPC-1070 User Manual  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Select “Yes” to remove the PenMount Windows 2000/SP driver and  
reboot the system.  
Figure F.7: Uninstall -3  
F.3 Touchscreen Calibration  
The “PM”, the icon of the PenMount Control Panel, is in the menu bar  
after the touchscreen installation. Please click the icon “PM” to call Pen-  
Mount Control Panel. It contains six functions: Calibrate, Draw, Multiple  
Monitors, Option, and About. Multiple Monitors is for multiple displays  
only; however TPC-1070 only provides one touchscreen display. This  
function is not workable on TPC-1070. About is to show the driver ver-  
sion.  
Calibrate  
Two ways to calibrate the touch screen include “Standard Calibration”  
and “Advanced Calibration”. Standard Calibration is to adjust most  
touchscreens.  
71  
AppendixF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Figure F.8: Standard Calibration -1  
Figure F.9: Standard Calibration -2  
TPC-1070 User Manual  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Figure F.10: Standard Calibration -3  
Note  
Touch the red squares in sequence. The cali-  
bration is completed after the fifth touch red  
point is calibrated. Press “ESC” to skip.  
Advanced Calibration is for the aged touchscreens by using 4, 9, 16 or 25  
points to calibrate touch panel.  
73  
AppendixF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Figure F.11: Advanced Calibration -1  
Figure F.12: Advanced Calibration -2  
TPC-1070 User Manual  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Figure F.13: Plot Calibration Data  
Note  
Plot Calibration Data enabled provides the blue  
lines to show linearity before calibration and  
black lines to show linearity after calibration  
when you finished the advanced calibration.  
Draw  
This is to test the touch screen operation. Its display shows touch loca-  
tion.  
75  
AppendixF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Figure F.14: Draw  
Click “menu” and then click “clear screen” to clear the drawing.  
Figure F.15: Clear Screen  
TPC-1070 User Manual  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Option  
This option is to set the operation mode and beep sounds if the beep  
sound is enabled. The operation mode, stream mode and point mode, is  
to enable/ disable the mouse’s ability to drag on-screen icons. Stream  
mode let the mouse functions as normal and dragging on-screen. Point  
mode is only let the mouse a click function. The dragging on-screen is  
disabled. Users can turn on / off the beep sound by clicking the “enable  
beep sound”.  
Figure F.16: Option  
77  
AppendixF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TPC-1070 User Manual  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
G
Fuse Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix G Fuse Specifications  
G.1 Fuse Specifications  
Rating: 250VAC, 3.15Amp  
Size: 5 x 20mm  
Note  
The fuse is set to break as the input voltage  
exceeds 33VDC for your protection.  
G.2 Fuse Replacement  
Step 1: Remove the fuse cover  
Step 2: Replace the damaged fuse with a new one  
Step 3: Place the fuse cover back in position  
Figure G.1: Fuse Replacement  
Warning  
Do NOT replace the fuse unless it is damaged.  
Do NOT replace the fuse with a different rating.  
TPC-1070 User Manual  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       

Ingersoll Rand Webcam PE10X XXX XXX XXXX User Manual
Insignia DVD Player NS C2115 User Manual
JVC DVD Player XV C3SL User Manual
JVC DVD Recorder DR DX5SU User Manual
JVC DVD VCR Combo 3834RP0093F User Manual
JVC Speaker LVT0673 001A User Manual
Karcher Work Light 49 24 0100 User Manual
Kenwood MP3 Player M1GC7 User Manual
Kicker Refrigerator VS10L5 User Manual
KitchenAid Refrigerator KBFS20ETBL00 User Manual