Quick Setup Guide
|
12" Table Fan NS-FANT12-CH
Part callouts
3 Slide the back guard onto the motor shaft, then screw the guard knob
on to hold it in place. Make sure that the handle is at the top.
Package contents
12" table fan includes:
Front guard
Fan blade
Rear guard
Handle
Oscillation
knob
Front guard
Fan blade
Rear guard
Guard knob
Blade
cap
Motor shaft
Power knob
Motor housing
(assembled)
Tilt knob
Stand
Safety
screw
Power cord
Lock
Fan blade
stem
Base
4 Put the fan blade on the motor shaft, then screw the blade cap on to
hold it in place. Make sure that the stem of the fan blade is closest to
the motor housing.
Pole locking cap
Safety screw
Assembling your fan
1 Remove the pole locking cap from the stand, then remove the blade
Motor housing (assembled)
cap and guard knob from the motor shaft.
Blade cap
Guard knob
Pole locking cap
Fan blade
stem
Base
5 Align the screw holes in the front and back guards with each other,
then close the four locks to hold the guards together.
Tip: The screw holes are at the bottom of the guards.
2 Slide the stand into the hole at the center of the base, then tighten
the pole locking cap underneath the base.
Quick Setup Guide
Features
• Four metal blades
• Oscillating head with adjustable angle tilt
• 3-speed settings
• Fused safety plug
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using your new product, please read these instructions to prevent any damage.
|