Insignia Clock Radio NS CLBT02 User Manual

User Guide  
Digital Clock Radio with Bluetooth  
NS-CLBT02  
Before using your new product, please read these instructions to prevent any damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NS-CLBT02 Digital Clock Radio with Bluetooth  
Important safety instructions  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
8
9
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
10 Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11 Only use attachments/accessories specified by the manufacturer.  
12 Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
13 Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
14 To reduce the risk of fire or electric shock, do not expose this device to  
rain, moisture, dripping, or splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
15 The wall plug is the disconnecting device. The plug must remain readily  
operable.  
16 Batteries should not be exposed to excessive heat such as sunshine, fire, or  
the like.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
Features  
Top buttons  
8
9
2
3
4
5
6
7
1
SRC  
1
Sleep  
SNOOZE  
DIMMER  
Pair/Preset  
10  
#
Item  
Description  
SRC  
1
(source) button  
When your radio is turned on, quickly press and release to switch  
between playing the radio, a Bluetooth device, or connected audio  
device. See “Playing audio from a Bluetooth device“ on page 12 or  
“Connecting an audio device” on page 13.  
2
3
(power) button  
When your radio is turned off (in standby mode), press to turn it on.  
See “Playing your radio” on page 11.  
(volume down) button  
(volume up) button  
Press to decrease the volume. While you are adjusting the volume, the  
“Volume” lights and the current volume level (1 through 15) appears  
in the center of the LCD.  
4
5
Press to increase the volume. While you are adjusting the volume, the  
“Volume” icon lights and the current volume level (1 through 15)  
appears in the center of the LCD.  
SNOOZE  
DIMMER  
button  
When the alarm turns on, press to turn off the alarm for 10 minutes.  
See “Using the snooze feature” on page 10.  
Press to adjust the LCD brightness. See “Adjusting the LCD brightness”  
on page 12.  
6
7
(previous/fast reverse) button  
Pair/Preset button  
In Bluetooth mode, quickly press and release to go to the previous  
song. Press for more than one second to fast reverse.  
In FM mode, press and hold for one second to go to the next lower  
radio station, or quickly press and release to manually tune to a lower  
radio frequency.  
Press and hold for six seconds to pair your radio with a Bluetooth  
device. See “Playing audio from a Bluetooth device” on page 12.  
In Bluetooth mode, quickly press and release to start or stop playback.  
See “Playing audio from a Bluetooth device” on page 12.  
In FM mode, press to program a radio station preset or to tune to a  
preset radio station. See “Programming a radio station preset” on  
page 11 or “Tuning to a preset radio station” on page 12.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NS-CLBT02 Digital Clock Radio with Bluetooth  
#
Item  
(next/fast forward) button  
Description  
8
In Bluetooth mode, quickly press and release to go to the next song.  
Press and hold for more than one second to fast forward. Review  
comments said “fast rewind.”  
In FM mode, press and hold for one second to go to the next higher  
radio station, or quickly press and release to manually tune to a higher  
radio frequency.  
9
(sleep) button  
Press to set the time or the sleep timer. For more information, see  
“Setting the time” on page 9 or “Setting the sleep timer” on page 11.  
Sleep  
1
2
10  
11  
(Alarm 1) button  
(Alarm 2) button  
Press to set Alarm 1. See “Setting the alarm sound” on page 9.  
Press to set Alarm 2. See “Setting the alarm sound” on page 9.  
Back  
1
2
3
#
Item  
Description  
1
AUX jack  
Connect an audio device to this jack to play the audio from the  
device through the radio speakers. See “Connecting an audio  
device” on page 13.  
2
3
USB port  
Connect a device with a micro USB or mini USB cable to charge  
the device’s battery. See “Charging a device’s battery” on  
page 14.  
DC IN jack  
Connect the AC/DC power adapter to this the jack. See  
“Connecting the AC/DC power adapter” on page 8.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
LCD  
6
1
2
Volume Preset AUX FM BLUETOOTH  
7
8
9
3
10  
11  
12  
PM  
12:08  
Description  
Buzzer  
SLEEP  
1
4
5
Radio  
SNOOZE  
#
Icon  
1
Preset  
When you are programming a radio station preset, the “Preset” icon lights and the next  
available preset number (P-01 through P-10) appears in the center of the LCD. When you  
exit programming mode, these indicators disappear. See “Programming a radio station  
preset” on page 11.  
When you tune to a radio station preset, the preset number (P-01 through P-10) appears  
in the center of the LCD. See “Tuning to a preset radio station” on page 12.  
2
Volume  
After you select the alarm sound, this icon indicates that you can change the volume of the  
alarm. See “Setting the alarm sound” on page 9.  
While you are adjusting the alarm or radio volume, the “Volume” icon lights and the  
current volume level (1 through 15) appears in the center of the LCD. When you stop  
adjusting the alarm or radio volume, these indicators disappear.  
3
4
5
6
Current time  
Alarm 1  
Snoozing  
AUX  
Displays the current time.  
Lights when Alarm 1 has been set. See “Setting the alarm time” on page 10.  
Lights when your radio is in snooze mode. See “Using the snooze feature” on page 10.  
Lights when a connected audio device is selected as the audio source. See “Connecting an  
audio device” on page 13.  
7
Bluetooth  
Lights when a paired Bluetooth device is selected as the audio source. See “Playing audio  
from a Bluetooth device” on page 12.  
8
9
FM  
Lights when the radio is selected as the audio source.  
Bluetooth logo  
Blinks slowly if you select Bluetooth as the audio source and no Bluetooth device is  
connected.  
Blinks quickly while pairing with a Bluetooth device.  
Lights solid when a Bluetooth device is connected.  
See “Playing audio from a Bluetooth device” on page 12.  
10 AM/PM  
“AM” lights after midnight and before noon. “PM” lights after noon and before midnight.  
Lights when Alarm 2 has been set. See “Setting the alarm time” on page 10.  
11 Alarm 2  
12 Battery  
Lights when no backup batteries are installed or when the backup battery charge is low.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
#
Icon  
Description  
13 Sleep  
Lights when the sleep timer is active. See “Setting the sleep timer” on page 11.  
Package contents  
Digital clock radio with Bluetooth  
AC/DC power adapter  
Quick Setup Guide  
User Manual  
Setting up your radio  
Installing backup batteries  
The backup batteries provide power to backup the time setting when you  
unplug the AC/DC power adapter.  
Cautions  
• Use only the size and type of batteries specified.  
• Do not mix old and new batteries.  
• Make sure that you follow the correct polarity as  
indicated in the battery compartment.  
• Do not try to recharge batteries not intended to be  
recharged. They can overheat and rupture. (Follow the  
battery manufacturer’s directions.)  
• Do not throw batteries into a fire. Dispose of used  
batteries as hazardous waste.  
Note  
If you unplug the AC/DC power adapter and the backup batteries  
are dead or not installed, the time setting is lost.  
To install backup batteries:  
1
Push the latch to release the battery compartment cover on the  
bottom of your radio, then lift the cover off the battery compartment.  
1
AAA  
AAA  
2
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-CLBT02 Digital Clock Radio with Bluetooth  
2
3
Insert two AAA batteries (not included) into the battery compartment.  
Make sure that the + and – symbols on the batteries align with the +  
and – symbols inside the compartment.  
Insert the tab on the battery compartment cover into the slot on the  
battery compartment, then press the cover down until it clicks into  
place.  
Connecting the AC/DC power adapter  
Note  
If you unplug the AC/DC power adapter and the backup batteries  
are dead or not installed, the time setting is lost.  
To connect the AC/DC power adapter:  
1
Plug the small connector on the power adapter into the DC IN jack on  
the back of your radio.  
2
Plug the other connector on the power adapter into a power outlet.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
Using your radio  
Setting the time  
Note  
“AM” or “PM” appears on the LCD to the right of the time. When  
you set the time, make sure that the “AM” or “PM” displays  
correctly.  
To set the time:  
1
Press (sleep) for about two seconds until the hour digits blink on  
Sleep  
the LCD.  
2
Press or to increase the hour or press or to decrease the  
hour.  
Sleep  
3
4
Press (sleep) again. The minutes digits blink on the LCD.  
Press or to increase the minutes or press or to decrease the  
minutes.  
Sleep  
5
Press (sleep) again to save the time setting and exit time setting  
mode.  
Setting the alarm sound  
Your radio has two alarms and can play the buzzer or the radio for the  
alarm sound. You can use the same alarm sound for both alarms or set one  
alarm to use the buzzer and the other alarm to use the radio.  
To set the alarm sound:  
1
2
1
2
1
Press  
(Alarm 1) or  
(Alarm 2). The  
or  
icon blinks on the LCD.  
1
2
2
To use the radio as the alarm sound, press  
(Alarm 1) or  
(Alarm 2)  
1
2
once. The  
Radio  
or  
Radio  
icon blinks on the LCD and the alarm  
sound is set to the radio. Wait three seconds to save the setting and  
exit alarm sound setting mode.  
OR  
1
To use the buzzer as the alarm sound, press  
(Alarm 1) or  
Buzzer  
Buzzer  
2
1
2
(Alarm 2) twice. The  
or  
icon blinks on the LCD and  
the alarm sound is set to the buzzer. Wait three seconds to save the  
setting and exit alarm sound setting mode.  
1
2
3
To completely turn off the alarm, press  
(Alarm 1) or  
(Alarm 2)  
1
2
repeatedly until the  
or  
icon disappears from the LCD.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-CLBT02 Digital Clock Radio with Bluetooth  
Setting the alarm time  
Your radio has two alarms that you can set for different times.  
Note  
“AM” or “PM” appears on the LCD to the right of the time. When  
you set the time, make sure that the “AM” or “PM” displays  
correctly.  
To set the alarm time:  
1
2
1
2
3
4
5
6
Press and hold  
(Alarm 1) or  
(Alarm 2) for about two seconds  
until the hour digits blink on the LCD.  
Press or to increase the hour or press or to decrease the  
hour.  
1
2
Press  
the LCD.  
(Alarm 1) or  
(Alarm 2) again. The minutes digits blink on  
Press or to increase the minutes or press or to decrease the  
minutes.  
1
2
Press  
(Alarm 1) or  
(Alarm 2) again. The “Volume” icon lights on  
the LCD and the volume digits blink.  
Press or to increase the alarm volume or press or to  
decrease the alarm volume. The alarm volume range is from 1 to 15  
with 15 being the loudest setting. The default setting is 10. While you  
are adjusting the volume, the “Volume” icon lights and the current  
volume level number appears in the center of the LCD.  
1
2
7
Press  
(Alarm 1) or  
(Alarm 2) again to save the time setting and  
exit alarm setting mode.  
Using the snooze feature  
Note  
SNOOZE  
DIMMER  
You can press  
a total of six times. If you press it a  
seventh time, the alarm turns off.  
To use the snooze feature:  
When the alarm sounds, press  
SNOOZE  
DIMMER  
. The alarm turns off for 10  
minutes and SNOOZE appears on the LCD.  
Turning the alarm off  
To turn off the alarm:  
Press any button except  
SNOOZE  
DIMMER  
.
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-CLBT02 Digital Clock Radio with Bluetooth  
Setting the sleep timer  
You can specify the amount of time your radio waits before it turns off  
automatically.  
To set the sleep timer:  
Press (sleep) repeatedly to select the amount of time you want  
Sleep  
your radio to wait before it turns off automatically. You can select 15,  
30, 45, 60, or 90 minutes. The time you select and the SLEEP icon  
appear on the LCD.  
To turn off the sleep timer, press (sleep) repeatedly until 00  
appears and the SLEEP icon disSaleepp pears.  
Playing your radio  
Notes  
When you turn off your radio, it goes into standby mode.  
To play your radio:  
1
Make sure that you have connected the AC/DC power adapter. See  
“Connecting the AC/DC power adapter” on page 8.  
2
3
Press (power). Your radio turns on.  
Press or to manually select a radio frequency.  
OR  
Press and hold or to automatically tune to the next lower or  
higher radio station.  
4
5
Press or to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current volume  
level number appears in the center of the LCD.  
To turn off your radio, press and hold (power) for two seconds. OFF  
appears on the LCD for three seconds, then your radio turns off.  
Programming a radio station preset  
A radio station preset lets you assign a preset number to a radio station to  
make it easier to tune to a station. You can program 10 presets.  
To program a radio station preset:  
1
Tune to the radio station you want to program, then press and hold  
Pair/Preset for two seconds. The “Preset” icon lights and the next  
available preset number (P-01 through P-10) appears in the center of  
the LCD. When you exit programming mode, these indicators  
disappear.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-CLBT02 Digital Clock Radio with Bluetooth  
2
3
If you want to use a different preset number, press or repeatedly  
until the number you want appears on the LCD.  
Within 10 seconds, press  
preset. If you do not press  
Pair/Preset again to save your station  
Pair/Preset within 10 seconds, your  
radio exits preset mode and your station preset is not saved.  
Tuning to a preset radio station  
After you program radio station presets, you can quickly tune to a preset  
station.  
To tune to a preset radio station:  
Quickly press and release press  
until the preset number for the station you want appears in the center  
LCD. Your radio tunes to the station.  
Pair/Preset one or more times  
Adjusting the LCD brightness  
When you adjust the LCD brightness, your radio retains the setting and  
uses this setting the next time you turn on your radio.  
To adjust the LCD brightness:  
SNOOZE  
DIMMER  
1
Quickly press  
repeatedly to select a brightness level. You can  
select High, Middle, or Low.  
2
Wait a few seconds to save your setting and exit brightness mode.  
Playing audio from a Bluetooth device  
You can pair your radio with a Bluetooth device to play the Bluetooth  
audio through your radio’s speakers.  
To pair your radio with a Bluetooth device:  
SRC  
1
2
3
Press (power) to turn on your radio, then press  
(source)  
repeatedly until Bluetooth appears on the LCD.  
Make sure that your Bluetooth device is turned on and within 33 feet  
(10 meters) of your radio.  
On the Bluetooth device, enter pairing mode. See the instructions that  
came with your Bluetooth device for information about how to enter  
pairing mode.  
4
On your radio, press and hold  
radio enters pairing mode. Your radio remains in pairing mode for five  
minutes or until your radio pairs with the Bluetooth device.  
Pair/Preset for six seconds. Your  
If your Bluetooth device is not turned on or is too far away from  
your radio, the icon on the LCD blinks every two seconds.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-CLBT02 Digital Clock Radio with Bluetooth  
While your radio is pairing with your Bluetooth device, the icon  
on the LCD blinks twice a second.  
When pairing is complete, the icon on the LCD lights solid.  
5
On your Bluetooth device, select NS-CLBT02. See the instructions that  
came with your Bluetooth device for information about how to select  
a device for pairing.  
Notes  
• Your Bluetooth device must be within 33 feet  
(10 meters) of your radio.  
• If you turn off your Bluetooth device or move it too far  
from the radio, the pairing connection is lost. When you  
move the last connected device within your radio's  
range, the pairing connection is restored.  
• Your radio can store pairing information for eight  
devices.  
To play from a paired Bluetooth device:  
SRC  
1
Press (power) to turn on your radio, then press  
repeatedly until Bluetooth appears on the LCD.  
(source)  
2
To control playback:  
Press or to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current  
volume level number appears in the center of the LCD.  
Press or to go to the previous or next song.  
Press and hold or to fast reverse or fast forward through the  
songs on the Bluetooth device.  
Press  
Pair/Preset to start or pause playback.  
Connecting an audio device  
You can connect an audio device, such as an MP3 player, to your radio to  
play music through your radio’s speakers.  
To connect an audio device:  
1
Plug an audio cable with a 3.5 mm connector (not included) into the  
AUX IN jack on the back of your radio and into the audio out jack on  
your audio device.  
SRC  
2
3
Press (power) to turn on your radio, then press  
(source)  
repeatedly until AUX appears on the LCD.  
Press or to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current volume  
level number appears in the center of the LCD.  
4
Use the controls on the audio device to control playback.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
Charging a device’s battery  
You can use the USB port on your radio to charge a connected device’s  
battery.  
To charge a device’s battery:  
Connect a USB cable (not provided) to the USB port on your radio and  
to the USB port on the device.  
Troubleshooting  
Problem  
Possible cause  
Possible solution  
SRC  
My Bluetooth device will not pair Bluetooth is not selected as the audio Press  
(source) repeatedly until Bluetooth  
with my radio.  
source on your radio.  
appears on the LCD.  
Your radio is not in pairing mode.  
Press and hold  
Pair/Preset for six seconds.  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio.  
33 feet (10 meters) of your radio.  
Your Bluetooth device is not in  
pairing mode.  
Make sure that your Bluetooth device is in  
pairing mode. See the instructions that came  
with your device.  
The battery level on your Bluetooth Charge the battery on your Bluetooth device,  
device may be too low. then try pairing again.  
Another paired Bluetooth device is Another paired Bluetooth device that is too  
too close to your raido.  
close to your radio (such as a cell phone paired  
to a headset) can interfer with pairing. Move  
the other paired device away from your radio or  
turn off the other paired device.  
Your Bluetooth device may not use a Your radio supports the A2DP and AVRCP  
supported Bluetooth protocol.  
Bluetooth protocols. Check the documentation  
that came with your device to determine if it  
uses a supported protocol.  
My radio is in pairing mode, but Your Bluetooth device may not be  
does not pair with my Bluetooth turned on.  
device.  
Make sure that your Bluetooth device is turned  
on.  
You have not selected your radio on Make sure that your Bluetooth device is in  
the Bluetooth device.  
pairing mode, then select NS-CLBT02 on your  
Bluetooth device. See the instructions that  
came your the Bluetooth device.  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio. 33 feet (10 meters) of your radio.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NS-CLBT02 Digital Clock Radio with Bluetooth  
Problem  
Possible cause  
Possible solution  
Sound from my Bluetooth device The volume level is set too high.  
is distorted or broken up.  
Lower the volume on your radio or Bluetooth  
device.  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio.  
33 feet (10 meters) of your radio.  
There may be something between  
Walls, furniture, and other objects can interfer  
your radio and Bluetooth device that with the communication between your radio  
is interfering.  
and Bluetooth device. Make sure that nothing is  
between your radio and Bluetooth device.  
Specifications  
Total RMS power  
2.4 W @1kHz, @ 10% THD  
Total peak power  
Signal-to-noise ratio  
Frequency response  
4.8 W  
65dB  
300Hz - 20kHz  
Supported Bluetooth protocols A2DP  
AVRCP  
Speakers  
2 × 40 mm  
Batteries  
2 AAA  
Dimensions (W × D × H)  
Weight  
8.7 × 1.8 × 2.8 in. (222 × 45 × 71.5 mm)  
1.1 lbs. (0.5 kg)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
Legal notices  
FCC Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measure:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Warning: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
RSS-Gen & RSS-210 Statement  
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is  
subject to the following two conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference that may cause undesired  
operation of the device.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio  
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil  
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout  
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le  
fonctionnement."  
"This equipment complies with Industry Canada radiation exposure limits set forth for an  
uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements  
Industry Canada limites établies pour un environnement non contrôlé."  
CAN ICES-3 (B)/NMB-3(B)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
90-day limited warranty - Insignia  
Definitions:  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new  
Insignia-branded product (“Product”), that the Product shall be free of defects in the original  
manufacturer of the material or workmanship for a period of ninety (90) days from the date  
of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product  
must be purchased in the United States or Canada from a Best Buy or Future Shop  
authorized dealer of Insignia brand products only that are packaged with this warranty  
statement.  
How long does the coverage last?  
The Warranty Period lasts for ninety (90) days from the date you purchased the Product. Your  
purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location, please take  
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that  
you place the Product in its original packaging or packaging that provides the same amount  
of protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address listed  
on the web site. Make sure that you put the Product in its original packaging or packaging  
that provides the same amount of protection as the original packaging.  
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct  
the issue over the phone.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or Future Shop  
branded retail stores or websites to the original purchaser of the product in the county  
where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-CLBT02 Digital Clock Radio with Bluetooth  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business or in  
communal areas of a multiple dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Display panel damaged by static (non-moving) images applied for lengthy periods  
(burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an  
area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures  
throughout the display. (Pixel based displays may contain a limited number of pixels  
that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids, gels or  
pastes.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY  
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY  
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2013 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective owners.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NS-CLBT02 Digital Clock Radio with Bluetooth  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSIGNIA is a registered trademark of BBY Solutions, Inc.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2013 BBY Solutions, Inc.  
All Rights Reserved  
1-877-467-4289  
V3 ENGLISH  
13-0222  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer SIXL 145K User Manual
Intel Switch 520T User Manual
Intex Recreation Swimming Pool Heater HT30220 User Manual
IOGear Network Router GCS1108 User Manual
Jabra Headphones GN1900 User Manual
JVC CRT Television AV 27530 User Manual
Kenwood Stereo Receiver KRF A4030 User Manual
Keys Fitness Fitness Equipment KF LPHS User Manual
Kompernass Battery Charger TLG 1750 B2 User Manual
Korg Recording Equipment EA 1 User Manual