Quick Setup Guide
NS-RSW211 Rocketboost Wireless Subwoofer
Connecting your subwoofer
Setting up and using your subwoofer in wireless mode
Congratulations on your purchase of a
Connecting the power
How does Rocketboost work?
high-quality Insignia product. Your Wireless
Subwoofer represents the state of the art in
powered subwoofers and is designed for
reliable and trouble-free performance. Use this
guide for initial setup of your Wireless
1 Plug the AC power cord into a 120 V wall outlet.
2 Click the Power switch to the right to turn on the wireless subwoofer.
The power indicator turns on.
Rocketboost technology can connect all audio devices throughout your home to form a home audio
network.
Rocketboost products include “Senders,” which send or transmit audio streams, and “Receivers,” which
receive the audio. This lets you listen to music from your Sender in other rooms using your Receiver.
Deciding on wired or wireless mode
Subwoofer. See your User Guide for more
information on using your Wireless Subwoofer.
This product can be used as a standard wired subwoofer or you can upgrade to wireless when the
subwoofer is used with other Rocketboost products. For wired mode, see the next section below. If you
want to setup the subwoofer in wireless mode, see that section in the next column. For more details on
using wireless mode with other Rocketboost product, see your User Guide.
For a wireless subwoofer application, the wireless subwoofer is a Rocketboost receiver. A Rocketboost
sender device needs to be connected to your AV receiver or other audio source to send the subwoofer
channel to the wireless subwoofer.
Package contents
•
•
•
NS-RSW211 Wireless Subwoofer
User Guide
Quick Setup Guide
Example configuration
Setting up your subwoofer for wireless operation depends on the audio product that you want to use your
subwoofer with. For example, you can use the subwoofer with your AV receiver, a Rocketboost-compatible
soundbar, or even directly with your Rocketboost compatible TV. For additional information on wireless
setup for those products, see the user guides for those products.
The example below shows a typical AV receiver, connected to an RF-RBUSB Rocketboost wireless sender,
connected wirelessly to the subwoofer (this solution is compatible with most AV receivers):
Setting up and using your subwoofer in wired mode
Your subwoofer can be used as a standard wired subwoofer with most AV receivers.
Connecting your subwoofer for wired mode
1 Connect the subwoofer output of your receiver to the Aux input of the subwoofer using a subwoofer
cable.
Typical AV Receiver + RF-RBUSB Rocketboost wireless sender/receiver
2 Make sure that the INPUT SELECT switch on the subwoofer is set to Aux (wired).
Setting the low pass filter
Connecting your subwoofer for wireless mode
Setting the low pass filter lets you select the frequency range of the sound that your subwoofer will
reproduce and amplify. Turning the knob counterclockwise to 80 Hz sets the subwoofer to reproduce
frequencies lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to reproduce frequencies lower
than 150 Hz. The best setting depends on the other speakers you are using with the subwoofer. If you are
unsure of the best setting, set this at 150 Hz.
IMPORTANT: Every Rocketboost network must contain one hub device, which helps devices join the
network. The network can have only one hub, which you can enable using the hub switch on the back of all
Rocketboost senders and wireless sender/receivers.
The wireless subwoofer is a Rocketboost wireless receiver and is not a hub device. To add this wireless
receiver to your Rocketboost network, you need to join it to your hub device. This section describes the
joining process.
Listening to music and setting the volume
1 Turn on your subwoofer and audio source and play music or a movie that you can easily hear the bass
sound on.
2 Adjust the volume level on your wireless subwoofer by turning the volume knob clockwise or
counterclockwise. The level should be set so that the bass volume level best matches the volume level
of the rest of your audio system.
Once you have set this volume level you can leave it at this setting. The subwoofer volume will then
automatically adjust when you change the volume of your audio source.
To establish communication:
1 Press the Power button on the Rocketboost hub device to turn it on.
2 Make sure that the INPUT SELECT switch on the subwoofer is set to Wireless.
3 Make sure that the power switch on your subwoofer is turned on. If the power indicator is red (Standby
mode), briefly press the CONNECT button to turn on your subwoofer (the power indicator turns blue).
4 Press and hold the Power button on the Rocketboost hub device for more than three seconds to put it
into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
|