XS1
Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-
friendly design to deliver high reliability and ease of use.
The projector offers the following features.
•
Wall color correction allowing projection on surfaces of several predefined
colors
•
•
•
Quick auto search speeding up the signal detecting process
Selectable password protected function
Up to 11 sets of picture modes providing multiple choices for different projection
purposes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3D color management allowing color adjustments to your liking
Detachable keypad on the projector to prevent stealing
Splash Screen lock to prevent unauthorized use
Selectable quick cooling function makes the projector cool in a shorter time
Presentation timer for a better control of time during presentations
One-key auto-adjustment to display the best picture quality
Digital keystone correction to correct distorted images
Adjustable color balance control for data/video display
High brightness projection lamp
Ability to display 16.7 million colors
Multi-language On-Screen Display (OSD) menus
Switchable normal and Economic modes to reduce the power consumption
Built-in speaker provides mixed mono audio when an audio input is connected
Powerful AV function to provide high quality video image
Component HDTV compatibility (YPbPr)
HDCP compatibility
•
The apparent brightness of the projected image will vary depending on the ambient
lighting conditions, selected input source contrast/brightness settings, and is directly
proportional to projection distance.
•
The lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. This is normal and expected behavior.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Shipping contents
The projector is shipped with the cables required for connection to a PC or video
equipment. Carefully unpack and verify that you have all of the items shown below.
If any of these items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those
illustrated.
PU
Projector
Remote Control & Battery
Keypad Plug
Reference
Guide CD
Registration
Card
Warranty
Quick Start Guide
Booklet
Safety
Booklet
Power Cord
VGA Cable
Optional accessories
1.
2.
3.
4.
5.
6.
Ceiling mount, wall mount
LiteShow II wireless presentation adaptor
Pull down and pull up 4:3 screens
Cables and adaptors
Replacement lamp
Optional cases
4
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector exterior view
1.
2.
3.
4.
5.
Lamp cover
Vent (heated air exhaust)
Projection lens
Quick-release button
External control panel
(See "Projector" on page
6 for details.)
Front/upper side
6.
7.
8.
9.
Focus ring
Vent (cool air intake)
Front IR remote sensor
AC power cord inlet
P
10. Kensington anti-theft lock
slot
11. Rear adjuster foot
12. Ceiling mounting holes
13. Rear IR remote sensor
14. Video input socket
15. S-Video input socket
16. RGB signal output socket
17. RGB (PC)/Component
video (YPbPr/ YCbCr)
signal input socket
Rear/lower side
18. DVI input socket
19. Audio socket
20. 12VDC output terminal
21. USB socket
22. RS-232 control port
23. Speaker grill
Introduction
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and functions
Projector
7.
BLANK
Used to hide the screen image. See
details.
8.
LAMP indicator light
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem. See "Indicators"
on page 56 for details.
9.
Keystone/Arrow buttons (
Down)
/
Up,
/
Manually corrects distorted images
resulting from an angled projection.
for details.
10. AUTO
Automatically determines the best
1.
2.
3.
Focus ring
picture timings for the displayed image.
page 29 for details.
Adjusts the focus of the projected
image. See "Fine-tuning the image
clarity" on page 29 for details.
TEMPerature warning light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 56 for details.
POWER indicator light
11.
Right/
Activates panel key lock. See "Panel
Key Lock" on page 47 for details.
When the On-Screen Display (OSD)
buttons are used as directional arrows
to select the desired menu items and to
make adjustments. See "Using the
menus" on page 23 for details.
Lights up or flashes when the projector
is under operation. See "Indicators" on
page 56 for details.
I
12. SOURCE
Displays the source selection bar. See
details.
13. Mode/Enter
4.
5.
Power
Toggles the projector on or off.
on page 42 for details.
Selects an available picture setup
mode. See "Selecting a picture mode"
on page 33 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the
menus" on page 23 for details.
Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
details.
6.
Left
Selects the desired menu items and
makes adjustments.
6
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
5.
6.
7.
Digital Zoom buttons (+, -)
Magnifies or reduces the projected
image size. See "Magnifying and
picture" on page 31 for details.
Menu/Exit
Turns on the On-Screen Display
(OSD) menu. Exits and saves menu
settings. See "Using the menus" on
page 23 for details.
Keystone buttons ( Up/
Down/
,
)
Manually corrects distorted images
resulting from an angled projection.
for details.
8.
9.
AUTO
I
Automatically determines the best
picture timings for the displayed
image. See "Auto-adjusting the image"
on page 29 for details.
1.
Power
Toggles the projector on or off.
projector" on page 42 for details.
FREEZE
Freezes the projected image. See
details.
Right/
2.
3.
Activates panel key lock. See "Panel
Key Lock" on page 47 for details.
10. SOURCE
Displays the source selection bar. See
details.
Left
When the On-Screen Display (OSD)
buttons are used as directional arrows
to select the desired menu items and
to make adjustments. See "Using the
menus" on page 23 for details.
BLANK
11. Mode/Enter
Depending upon which input signal is
selected, selects an available picture
setup mode. See "Selecting a picture
mode" on page 33 for details.
4.
Enacts the selected On-Screen
Display (OSD) menu item. See "Using
the menus" on page 23 for details.
Used to hide the screen image. See
details.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Remote control effective range
Infra-Red (IR) remote control sensors are located on the front and the back of the
projector. The remote control must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control sensors to function correctly. The
distance between the remote control and the sensors should not exceed 8 meters
(~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR
sensors on the projector that might obstruct the infra-red beam.
•
Operating the projector from
the rear
•
Operating the projector from
the front
Replacing the remote control battery
1.
Pull out the battery holder.
Please follow the illustrated instructions. Push and
hold the locking arm while pulling out the battery
holder.
2.
3.
Insert the new battery in the holder. Note
the positive polarity should face outward.
Push the holder into the remote control.
CAUTION
•
•
Avoid excessive heat and humidity.
There may be battery damage if the battery is
incorrectly replaced.
•
•
•
•
Replace only with the same or equivalent type
recommended by the battery manufacturer.
Dispose of the used battery according to the
battery manufacturer’s instructions.
Never throw a battery into a fire. There may be
danger of an explosion.
If the battery is dead or if you will not be using
the remote control for a long time, remove the
battery to prevent damage to the remote control
from possible battery leakage.
8
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation
locations:
1.
Front Table
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
2.
Front Ceiling
Select this location with the projector suspended
upside-down from the ceiling in front of the
screen.
Purchase the InFocus Projector Ceiling
Mounting Kit from your dealer to mount your
projector on the ceiling.
Set Front Ceiling in the SYSTEM SETUP:
Basic > Projector Position menu after you turn
the projector on.
3.
Rear Table
Select this location with the projector placed near
the floor behind the screen.
Note that a special rear projection screen is
required.
Set Rear Table in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the
projector on.
4.
Rear Ceiling
Select this location with the projector suspended
upside-down from the ceiling behind the screen.
Note that a special rear projection screen and the
InFocus Projector Ceiling Mounting Kit are
required for this installation location.
Set Rear Ceiling in the SYSTEM SETUP: Basic
> Projector Position menu after you turn the
projector on.
Your room layout or personal preference will dictate which installation location you
select. Take into consideration the size and position of your screen, the location of
a suitable power outlet, as well as the location and distance between the projector
and the rest of your equipment.
Positioning your projector
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video
format each factors in the projected image size.
4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9
(widescreen) aspect ratio image, the projector can resize and scale a widescreen
image to the projector's native aspect width. This will result in a proportionally
smaller height equivalent to 75% of the projector's native aspect height.
4:3 aspect image in a 4:3
aspect display area
16:9 aspect image scaled to a
4:3 aspect display area
Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image
displayed by this projector. This will be seen as darkened (unlit) bars along the top
and bottom (vertical 12.5% height respectively) of the 4:3 projection display area
whenever displaying a scaled 16:9 aspect image in the vertical center of the 4:3
projection display area.
When determining the position of your projector, you should consider its intended
use and input signal aspect ratios. All inputs (other than composite Video being fed
a 16:9 aspect signal) will display in a 4:3 aspect ratio (and will require an additional
33% display height than that of the scaled 16:9 aspect image projection area).
Do not select a permanent projector position based upon a 16:9 projection if you will ever
need to select an input (other than composite Video being fed a 16:9 aspect signal).
The projector should always be placed horizontally level (like flat on a table), and
positioned directly perpendicular (90° right-angle square) to the horizontal center of
the screen. This prevents image distortion caused by angled projections (or
projecting onto angled surfaces).
The modern digital projector does not project directly forward (like older style reel-
to-reel film projectors did). Instead, digital projectors are designed to project at a
slightly upward angle above the horizontal plane of the projector. This is so that
they can be readily placed on a table and will project forward and upwards onto a
screen positioned so that the bottom edge of the screen is above the level of the
table (and everyone in the room can see the screen).
If the projector is mounted on a ceiling, it must be mounted upside-down so that it
projects at a slightly downward angle.
bottom edge of the projected image to be vertically offset from the horizontal plane
of the projector. When ceiling mounted, this refers to the top edge of the projected
image.
If the projector is positioned further away from the screen, the projected image size
increases, and the vertical offset also increases proportionately.
When determining the position of the screen and projector, you will need to account
for both the projected image size and the vertical offset dimension, which are
directly proportional to the projection distance.
10
Positioning your projector
Download from Www.Somanuals.com. All Manuals Search And Download.
InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in
determining the ideal location for your projector. There are two dimensions to
consider, the perpendicular horizontal distance from the center of the screen
(projection distance), and the vertical offset height of the projector from the
horizontal edge of the screen (offset).
How to determine the position of the projector
for a given screen size
1.
2.
Select your screen size.
Refer to the table and find the closest match to your screen size in the left
to the right to find the corresponding average distance from screen value in
This is the projection distance.
3.
4.
On that same row, look across to the right column and make note of the
Vertical offset value. This will determine the final vertical offset placement of
the projector in relation to the edge of the screen.
The recommended position for the projector is aligned perpendicular to the
horizontal center of the screen, at the distance from the screen determined in
step 2 above, and offset by the value determined in step 3 above.
For example, if you are using a 108 inch screen, the recommended projection
distance is 1459 mm and with a vertical offset of 165 mm.
If you place the projector in a different position (to that recommended), you will
have to tilt it down or up to center the image on the screen. In these situations,
some image distortion will occur. Use the Keystone function to correct the
How to determine the recommended screen size
for a given distance
This method can be used for situations where you have purchased this projector
and would like to know what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1.
Measure the distance between the projector and where you want to position
the screen. This is the projection distance.
2.
Refer to the table and find the closest match to your measurement in the
average distance from screen column labelled "Recommended projection
3.
4.
Using this value, look across that row to the left to find the corresponding
screen diagonal listed in that row. That is the projected image size of the
projector at that projection distance.
On that same row, look across to the right column and make note of the
Vertical offset value. This will determine the final placement of the screen in
relation to the horizontal plane of the projector.
For example, if your measured projection distance was 1.5 m (1500 mm), the
closest match in the "Recommended projection distance from screen in mm"
column is 1459 mm. Looking across this row shows that a 9' (108") screen is
required. If you can only obtain metric sized screens, the screen size is 2743 mm
diagonally.
Positioning your projector
Download from Www.Somanuals.com. All Manuals Search And Download.
11
4:3 Screen Diagonal
Screen
Center of lens
Offset
Projection distance
4:3 screen diagonal
Recommended projection distance Vertical offset in
Feet Inches
mm
1692
1829
2000
2134
2438
2500
2743
3000
3007
from screen in mm
mm
101
110
120
128
146
150
165
180
180
900
973
6
72
1064
1135
1297
1330
1459
1596
1600
7
8
84
96
9
108
There is 3% tolerance among these numbers due to optical component variations. InFocus
recommends that if you intend to permanently install the projector, you should physically test
the projection size and distance using the actual projector in situ before you permanently
install it, so as to make allowance for this projector's optical characteristics. This will help you
determine the exact mounting position so that it best suits your installation location.
12
Positioning your projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
When connecting a signal source to the projector, be sure to:
1.
2.
3.
Turn all equipment off before making any connections.
Use the correct signal cables for each source.
Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 4). They are commercially available from electronics stores.
Connecting a computer or monitor
Connecting a computer
The projector provides a VGA and DVI input sockets that allow you to connect it to
both IBM® compatibles and Macintosh® computers. A Mac adapter (an optional
accessory) is needed if you are connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer
(either through a VGA cable or VGA to DVI-A cable):
•
With a VGA cable:
•
With a VGA to DVI-A cable:
1.
Take the supplied VGA cable
and connect one end to the D-
Sub output socket of the
computer.
1.
Take a VGA to DVI-A cable and
connect the VGA end to the D-
Sub output socket of the
computer.
2.
3.
Connect the other end of the
VGA cable to the D-SUB/COMP.
IN signal input socket on the
projector.
2.
Connect the DVI end of the VGA
to DVI-A cable to the DVI signal
input socket on the projector.
If you wish to make use of the projector (mixed mono) speaker in your
presentations, take a suitable audio cable and connect one end of the
cable to the audio output socket of the computer, and the other end to the
AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen
Connection
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The final connection path should be like that shown in the following diagram:
Notebook or
desktop
computer
i. VGA cable
or
ii. VGA to DVI-A
cable
iii.Audio cable
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to
find your notebook's key combination.
14
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the
screen, you can connect the D-SUB OUT signal output socket on the projector to
an external monitor with a VGA or VGA to DVI-A cable by following the instructions
below.
To connect the projector to a monitor (either through a VGA cable
or VGA to DVI-A cable):
•
With a VGA cable:
•
With a VGA to DVI-A cable:
Note: Your monitor must be equipped with
a DVI input socket.
1.
Connect the projector to a computer as described in "Connecting a
The D-SUB output only works when an appropriate D-SUB input is made
to the projector. Be sure the projector is connecting with the computer
using the D-SUB/COMP. IN socket, not the DVI socket.
2.
3.
Take a suitable VGA cable (only
one supplied) and connect one
end of the cable to the D-Sub
input socket of the video
monitor.
Connect the other end of the
cable to the D-SUB OUT socket
on the projector.
2.
Take a VGA to DVI-A cable and
connect the DVI end of the cable
to the DVI input socket of the
video monitor.
Connect the VGA end of the
cable to the D-SUB OUT socket
on the projector.
3.
The final connection path should be like that shown in the following diagram:
Notebook or desktop computer
i. VGA to DVI-A
(DVI)
cable
ii. VGA cable
iii.VGA cable
(VGA)
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Connecting Video source devices
This section describes how to connect the projector to Video source devices using
video cables. Video cable connections are recommended for Video presentations.
You can connect your projector to various Video source devices that provide any
one of the following output sockets:
•
•
•
•
DVI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one of the
above connecting methods, however each provides a different level of video
quality. The method you choose will most likely depend upon the availability of
matching terminals on both the projector and the Video source device as described
below:
Best video quality
The best available video connection method is DVI. If your source device is
equipped with a DVI socket, based on the type of DVI connector you have, you can
enjoy digital or high-end analog video quality.
to a DVI source device and other details.
If no DVI source is available, the next best video signal is Component Video (not to
be confused with composite Video). Digital TV tuners and DVD players output
Component Video natively, so if available on your devices, they should be your
connection method of choice in preference to S-Video or (composite) Video.
connect the projector to a component video device.
Better video quality
The S-Video method provides a better quality analog video than standard
composite Video. If you have both composite Video and S-Video output terminals
on your Video source device, you should elect to use the S-Video option.
projector to an S-Video device.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but
less than optimal result from your projector, being the least video quality of the
available methods described here.
the projector to a composite Video device.
Connecting audio
The projector has a built-in mono speaker which is designed to provide basic audio
functionality accompanying data presentations for business purposes only. It is not
designed for, nor intended for stereo audio reproduction use as might be expected
in home theatre or home cinema applications. Any stereo audio input (if provided),
is mixed into a common mono audio output through the projector speaker.
16
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVI source device
The projector provides a DVI input socket that allows you to connect it to a DVI
source device like a DVD player, or a VGA output device like a notebook or desktop
computer.
There are three types of DVI connectors: DVI-A, DVI-D, and DVI-I. The DVI-I
socket is an integrated connector which supports both formats: DVI-A, and DVI-D.
DVI-A format is used to carry a DVI signal to an analog (VGA) display, or vice-
versa. Although some signal quality is lost from the signal conversion, it still
transmits higher picture quality than a standard VGA connection.
DVI-D format is used to directly carry a digital signal to a digital display without
signal conversion. The pure digital connection provides faster and higher image
quality than an analog connection, due to the nature of the digital format.
DVI-A and DVI-D formats are non-interchangeable. You cannot connect a DVI-A
format connector to DVI-D equipment and visa-versa. Make sure you know which
kind of format your equipment is fitted with before you purchase any cables. Or you
can purchase a DVI-I cable which will be more useful in any type of DVI connection
situation.
Examine your source device to determine if it has an unused DVI output socket
available:
•
•
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to a DVI source device or a computer:
For information on connecting a DVI source device to a computer through a VGA to DVI-A
1.
2.
3.
Take a DVI (DVI-D or DVI-I) cable and connect one end to the DVI output
socket of the DVI source device.
Connect the other end of the cable to the DVI signal input socket on the
projector.
If you wish to make use the projector (mixed mono) speaker, take a suitable
audio cable and connect one end of the cable to the audio output sockets of
the video device, and the other end to the AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
17
The final connection path should be like that shown in the following diagram:
AV device
DVI-D or
DVI-I cable
Audio
cable
In the unlikely event that you connect the projector to a DVD player via the projector’s DVI-D
input and the projected picture displays wrong colors, please change the color space to YUV.
18
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused
Component Video output sockets available:
•
•
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to a Component Video source device:
1.
Take a Component Video to VGA (D-Sub) adaptor cable and connect the end
with 3 RCA type connectors to the Component Video output sockets of the
Video source device. Match the color of the plugs to the color of the sockets;
green to green, blue to blue; and red to red.
2.
3.
Connect the other end of the Component Video to VGA (D-Sub) adaptor cable
(with a D-Sub type connector) to the D-SUB/COMP. IN socket on the
projector.
If you wish to make use the projector (mixed mono) speaker, take a suitable
audio cable and connect one end of the cable to the audio output sockets of
the video device, and the other end to the AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen
The final connection path should be like that shown in the following diagram:
AV device
Component Video to
VGA (D-Sub) adaptor
Audio cable
cable
•
•
The projector is only capable of playing mixed mono audio, even if a stereo audio input is
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused S-Video output
socket available:
•
•
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to an S-Video source device:
1.
2.
3.
Take an S-Video cable and connect one end to the S-Video output socket of
the Video source device.
Connect the other end of the S-Video cable to the S-VIDEO socket on the
projector.
If you wish to make use the projector (mixed mono) speaker, take a suitable
audio cable and connect one end of the cable to the audio output sockets of
the video device, and the other end to the AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen
The final connection path should be like that shown in the following diagram:
A/V device
S-Video cable
Audio cable
•
•
The projector is only capable of playing mixed mono audio, even if a stereo audio input is
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
•
If you have already made a Component Video connection between the projector and this
S-Video source device using Component Video connections, you need not connect to this
device using an S-Video connection as this makes an unnecessary second connection of
20
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused composite
Video output sockets available:
•
•
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to a composite Video source device:
1.
2.
3.
Take a Video cable and connect one end to the composite Video output
socket of the Video source device.
Connect the other end of the Video cable to the VIDEO socket on the
projector.
If you wish to make use the projector (mixed mono) speaker, take a suitable
audio cable and connect one end of the cable to the audio output sockets of
the video device, and the other end to the AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen
The final connection path should be like that shown in the following diagram:
A/V device
Video cable
Audio cable
•
•
The projector is only capable of playing mixed mono audio, even if a stereo audio input is
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
•
You need only connect to this device using a composite Video connection if Component
Video and S-Video inputs are unavailable for use. See "Connecting Video source devices"
on page 16 for details.
Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Operation
Starting up the projector
1.
Plug the power cord into the projector and
into a wall socket. Turn on the wall socket
switch (where fitted). Check that the Power
indicator on the projector lights orange after
power has been applied.
2.
Remove the lens cover. If it is left on, it
could become deformed due to the heat
produced by the projection lamp.
I
3.
Press
Power on the projector or remote
control to start the projector. The Power
indicator light flashes green and stays
green when the projector is on.
The start up procedure takes about 30
seconds. In the later stage of start up, a
startup logo is projected.
(If necessary) Rotate the focus ring to
adjust the image clearness.
If the projector is still hot from previous activity, it will
run the cooling fan for approximately 90 seconds
before energizing the lamp.
4.
If you are prompted for a password, press
the arrow buttons to enter a six digit
Switch all of the connected equipment on.
The projector will start to search for input signals. The current input source
being scanned displays on the screen. If the projector doesn't detect a valid
signal, the 'No Signal' message will continue displaying until an input source
signal is found.
5.
6.
You can also press SOURCE on the projector or remote control to select your
22
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
Main menu icon
Main menu
DISPLAY
Wall Color
Off
Aspect Ratio
Keystone
Auto
ENTER
Highlight
Status
Position
Phase
0
Sub-menu
0
H. Size
Press Menu/
Exit to the
previous
page or to
exit.
Digital Zoom
Exit
MENU
Analog RGB
Current input signal
To use the OSD menus, please set the OSD menu to your familiar language first.
1.
Press Menu/Exit on the projector or
remote control to turn the OSD menu
on.
3.
Press
to highlight
Language and press
to select a preferred
language.
/
DISPLAY
Off
Auto
Wall Color
Aspect Ratio
Keystone
Position
Phase
H. Size
SYSTEM SETUP: Basic
Presentation Timer
Language
English
0
0
Projector Position
Front Table
Disable
Disable
Off
Auto Power Off
Blank Timer
Panel Key Lock
Digital Zoom
Timer Controller
Splash Screen
My Screen
Disable
InFocus
MENU Exit
Analog RGB
Analog RGB
MENU Exit
4.
Press Menu/Exit twice* on
the projector or remote
control to leave and save the
settings.
2.
Use
/
to highlight the SYSTEM
SETUP: Basic menu.
SYSTEM SETUP: Basic
Presentation Timer
*The first press leads you back to
the main menu and the second
press closes the OSD menu.
Language
English
Projector Position
Auto Power Off
Blank Timer
Panel Key Lock
Timer Controller
Splash Screen
My Screen
Front Table
Disable
Disable
Off
Disable
InFocus
MENU Exit
Analog RGB
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise,
purchase a lock, such as the Kensington lock, to secure the projector. You can
5 for details.
A Kensington security cable lock is usually a combination of key(s) and the lock.
Refer to the lock’s documentation for finding out how to use it.
Removing the control keypad on the projector
The control keypad on the projector is
detachable. Once the keypad is removed from
the projector, it is not possible to operate it
without the control keypad or remote control. We
suggest that you keep the control keypad and
remote control far from the projector in case they
are taken together with it.
To remove the control keypad:
1.
Locate the screw locations on the lower
corner of the control keypad.
Completely loosen the screws.
Lift the control keypad by pulling the
screws.
2.
3.
4.
5.
Remove the control keypad from the
projector.
After removing the control keypad from the
projector, you can use the keypad plug
supplied to cover the keypad socket if
necessary.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes
an option for setting up password security. The password can be set through the
On-Screen Display (OSD) menu.
You will be inconvenienced if you activate the password functionality and subsequently forget
the password. Print this reference guide (if necessary) and write the password you used in
this guide, and keep it in a safe place for later use.
24
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a password
Once a password has been set and the power on lock is activated, the projector cannot be
used unless the correct password is entered every time the projector is started.
Once a password has been set and the splash screen lock is activated, you cannot change the
splash screen that displays at projector startup unless the correct password is entered.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security
Settings menu. Press Mode/Enter. The Security Settings page displays.
Highlight Change Security Settings and press Mode/Enter.
2.
3.
As pictured to the right, the four arrow
INPUT NEW PASSWORD
buttons (
,
,
,
) respectively
Power On Lock and Splash Screen Lock
use the same password
represent 4 digits (1, 2, 3, 4). According to
the password you desire to set, press the
arrow buttons to enter six digits for the
password.
4.
Confirm the new password by re-entering
the new password.
MENU Back
Once the password is set, the OSD menu
returns to the Security Settings page.
To activate the Power On Lock function, press
5.
6.
/
to highlight Power On
Lock and press
To activate the Splash Screen Lock function, press
Screen Lock and press to select On.
/
to select On.
/
to highlight Splash
/
When the Splash Screen Lock is activated, the My Screen function in the
SYSTEM SETUP: Basic menu will be password-protected.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this reference guide in advance or right after the password is entered so that it is
available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this reference guide in a safe place.
7.
To leave the OSD menu, press Menu/Exit.
If you forget the password
If the password function is activated, you will be
asked to enter the six digit password every time
you turn on the projector. If you enter the wrong
password, the password error message as
pictured to the right displays lasting for three
seconds, and the INPUT PASSWORD message
follows. You can retry by entering another six-
digit password, or if you did not record the
password in this reference guide, and you
absolutely do not remember it, you can use the
password recall procedure. See "Entering the
details.
Password Error
Please try again.
If you enter an incorrect password 5 times in
succession, the projector will automatically shut
down in a short time.
Operation
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering the password recall procedure
Press and hold AUTO on the projector or
RECALL PASSWORD
remote control for 3 seconds. The projector
will display a coded number on the screen.
Write down the number and turn off your
projector. Seek help from the local service
center to decode the number. You may be
required to provide proof of purchase
documentation to verify that you are an
authorized user of the projector.
Please write down the recall code,
and contact InFocus
Customer Center.
Recall Code:
0 2 1 2
MENU Exit
Changing the password
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced> Security
Settings > Change Password menu.
2.
3.
Press Mode/Enter. The message 'INPUT CURRENT PASSWORD' displays.
Enter the old password.
i. If the password is correct, another message 'INPUT NEW PASSWORD'
displays.
ii. If the password is incorrect, the password error message displays lasting
for three seconds, and the message 'INPUT CURRENT PASSWORD'
displays for your retry. You can press Menu/Exit to cancel the change or
try another password.
4.
Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this reference guide in advance or right after the password is entered so that it is
available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this reference guide in a safe place.
5.
6.
Confirm the new password by re-entering the new password.
You have successfully assigned a new password to the projector. Remember
to enter the new password next time the projector is started.
To leave the OSD menu, press Menu/Exit.
7.
Disabling the password function
To disable password protection, go back to the SYSTEM SETUP: Advanced >
Security Settings > Change Security Settings menu after opening the OSD
menu system. Press Mode/Enter. The message 'INPUT PASSWORD' displays.
Enter the current password.
i. If the password is correct, the OSD menu returns to the Security Settings
page.
Press
to highlight Power On Lock and press
/
to select Off. You
will not have to enter the password next time when turning on the
projector.
Press
to highlight Splash Screen Lock and press
/
to select Off.
The Splash Screen function in the SYSTEM SETUP: Basic menu will be
available for your change.
26
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ii. If the password is incorrect, the password error message displays lasting
for three seconds, and the message 'INPUT PASSWORD' displays for
your retry. You can press Menu/Exit to cancel the change or try another
password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
Switching input signal
The projector can be connected to multiple devices at the same time. However, it
can only display one full screen at a time. When starting up, the projector
automatically searches for the available signals.
Be sure the Quick Auto Search function in the SOURCE menu is On (which is the
default of this projector) if you want the projector to automatically search for the
signals.
You can also manually cycle through the
available input sources.
1.
Press SOURCE on the projector or remote
control. A source selection bar displays.
2.
Press
/
until your desired signal is
selected and press Mode/Enter.
Once detected, the selected source
information will display on the screen for
seconds. If there is multiple equipment
to search for another signal.
D-Sub / Comp.
•
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly
moving images (movies).
DVI-A
DVI-D
Video
The input signal type effects the options available
for the Picture Mode. See "Selecting a picture
mode" on page 33 for details.
S-Video
•
The native display resolution of this projector is in a
4:3 aspect ratio. For best display picture results,
you should select and use an input source which
outputs at this resolution. Any other resolutions will
be scaled by the projector depending upon the
'aspect ratio' setting, which may cause some image
distortion or loss of picture clarity. See "Selecting
the aspect ratio" on page 32 for details.
•
If the frequency/resolution of the input signal
exceeds the projector's operating range, you will
see the message 'Out of Range' displayed on a
blank screen. Please change to an input signal
which is compatible with the projector's resolution
or set the input signal to a lower setting. See
"Timing chart" on page 59 for details.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the
projector’s DVI-D input and the projected picture displays wrong colors, please
change the color space to YUV.
To do this:
1.
2.
Press Menu/Exit and then press
/
until the SOURCE menu is highlighted.
Press
to highlight Color Space Conversion and press to select
/
YUV.
This function is only available when the DVI-D input socket is in use.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among InFocus
logo, Black or Blue screen, you can make your own startup screen that is a picture
projected from your computer or video source.
To create your own startup screen, project the picture you want to use as your
startup screen from either a computer or video source. The rest steps are as
follows.
1.
Press Menu/Exit and then press
/
until the SYSTEM SETUP: Basic
menu is highlighted.
2.
3.
4.
Press
to highlight My Screen and press Mode/Enter.
A confirmation message displays. Press Mode/Enter again.
The message 'Screen Capturing...' displays while the projector is processing
the picture. Please wait.
5.
6.
If the action is successful, you see the message 'Capture Succeeded' on the
screen. The captured picture is saved as My Screen.
To view the captured picture displayed as the startup screen, set My Screen
in the SYSTEM SETUP: Basic > Splash Screen menu and restart the
projector.
In the unlikely event that the capturing action fails, change your target picture.
28
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster
foot. These adjusters change the image height and projection angle. To adjust the
projector:
1.
Press the quick-release button and lift the
front of the projector. Once the image is
positioned where you want it, release the
quick-release button to lock the foot in
position.
2.
Screw the rear adjuster foot to fine tune the
horizontal angle.
To retract the foot, hold up the projector while
pressing the quick-release button, then slowly
lower the projector. Screw the rear adjuster foot
in a reverse direction.
WARNING
•
•
Do not look into the lens while
the lamp is on. The strong light
from the lamp may cause
damage to your eyes.
If the projector is not placed on a flat surface or
the screen and the projector are not
perpendicular to each other, the projected image
becomes trapezoidal. To correct this situation,
Be careful when you press the
adjuster button as it is close to
the exhaust vent where hot air
comes from.
Auto-adjusting the image
In some cases, you may need to optimize the
picture quality. To do this, press AUTO on the
projector or remote control. Within 3 seconds,
the built-in Intelligent Auto Adjustment function
will re-adjust the values of Frequency and Clock
to provide the best picture quality.
The current source information will be displayed
in the corner of the screen for 3 seconds.
The screen will be blank while AUTO is functioning.
Fine-tuning the image clarity
If needed, sharpen the picture by rotating the
focus ring.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at
either the top or bottom. It occurs when the projector is not perpendicular to the
screen.
To correct this, besides adjusting the height of the projector, you will need to
manually correct it following ONE of these steps.
•
•
Press
control to display the Keystone correction
page. Press to correct keystoning at the
top of the image. Press to correct
keystoning at the bottom of the image.
Press Menu/Exit on the projector or remote
control. Go to the DISPLAY > Keystone and
/
on the projector or remote
adjust the values by pressing
the projector or remote control.
or
on
Keystone
Press
/
.
Press
/
.
MENU Back
30
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnifying and searching for details on the
projected picture
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•
Using the remote control
1.
Press Digital Zoom +/- to display the Zoom
bar. Press Digital Zoom + to magnify the
center of the picture. Press the key
repeatedly until the picture size is suitable
for your need.
2.
3.
Use the directional arrows (
on the projector or remote control to
navigate the picture.
To restore the picture to its original size,
press AUTO. You can also press Digital
Zoom -. When the key is pressed again, the
picture is further reduced until it is restored
to the original size.
,
,
,
)
The picture can only be
navigated after the picture is
magnified. You can further
magnify the picture while
searching for details.
•
Using the OSD menu
1.
Press Menu/Exit and then press
/
until the DISPLAY menu is
highlighted.
2.
Press
to highlight Digital Zoom and press Mode/Enter. The Zoom bar
displays.
3.
4.
Press
repeatedly to magnify the picture to a desired size.
To navigate the picture, press Mode/Enter to switch to the paning mode and
press the directional arrows (
to navigate the picture.
,
,
,
) on the projector or remote control
5.
To reduce size of the picture, press Mode/Enter to switch back to the zoom
in/out function, and press AUTO to restore the picture to its original size. You
can also press
repeatedly until it is restored to the original size.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog
TV and computers are in 4:3 ratio, which is the default for this projector, and digital
TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector
can dynamically stretch and scale the image output to a different aspect than that of
the image input source.
To change the projected picture ratio (no matter what aspect the source is):
1.
Press Menu/Exit and then press
highlighted.
/
until the DISPLAY menu is
2.
3.
Press
Press
to highlight Aspect Ratio.
to select an aspect ratio to suit the format of the video signal and
/
your display requirements.
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
1.
4:3: Scales an image so that it is displayed in the center of
the screen with a 4:3 aspect ratio. This is most suitable for 4:3
images like computer monitors, standard definition TV and
4:3 aspect DVD movies, as it displays them without aspect
alteration.
2.
3.
16:9: Scales an image so that it is displayed in the center of
the screen with a 16:9 aspect ratio. This is most suitable for
images which are already in a 16:9 aspect, like high definition
TV, as it displays them without aspect alteration.
Auto: Scales an image proportionally to fit the projector's
native resolution in its horizontal width. This is suitable for the
incoming image which is either in 4:3 nor 16:9 and you want
to make most use of the screen without altering the image's
aspect ratio.
4.
Real: The image is projected as its original resolution, and
resized to fit within the display area. For input signals with
lower resolutions, the projected image will display smaller
than if resized to full screen. You could adjust the zoom
setting or move the projector towards the screen to increase
the image size if necessary. You may also need to refocus
the projector after making these adjustments.
32
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to suit
your operating environment and input source
picture type.
To select a operation mode that suits your need,
you can follow one of the following steps.
•
Press Mode/Enter repeatedly until your
desired mode is selected.
•
Go to the PICTURE > Preset Mode menu
and press
/
to select a desired mode.
A slight variation in the
picture brightness and colors
may be observed during the
very short time of switching
picture modes.
Picture modes for different types of
signals
The picture modes available for different types of
signals are listed below.
PC/DVI-A/DVI-D Signal Input
1.
Brightest mode (Default): Maximizes the brightness of the projected image.
This mode is suitable for environments where extra-high brightness is
required, such as using the projector in well lit rooms.
2.
3.
Presentation mode: Is designed for presentations. The brightness is
emphasized in this mode to match PC and notebook coloring.
Photo mode: Maximizes the purity of RGB colors to provide true-to-life
images regardless of brightness setting. It is most suitable for viewing photos
taken with an sRGB compatible and properly calibrated camera, and for
viewing PC graphic and drawing applications such as AutoCAD.
Cinema mode: Is appropriate for playing colorful movies, video clips from
digital cameras or DVs through the PC input for best viewing in a blackened
(little light) environment.
4.
5.
User 1/User 2 mode: Recalls the settings customized based on the current
details.
YPbPr/S-Video/Video/HDCP Signal Input
1.
2.
3.
4.
Brightest mode: Is suitable for playing gamebox-based video games in a
normal living room lighting level environment.
Standard mode (Default): Is appropriate for viewing colorful movies, video
clips from digital cameras or DVs.
Cinema mode: Is suitable for enjoying dark movies or DVD movies best
viewed in a blackened (little light) home cinema or lounge room environment.
User 1/User 2 mode: Recalls the settings customized based on the current
details.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User 1/2)
as a starting point and customize the settings.
1.
2.
Press Menu/Exit to open the On-Screen Display (OSD) menu.
In the PICTURE menu, highlight Preset Mode and press
User 1 or User 2.
/
to select
3.
Press
to highlight Reference Mode.
This function is only available when User 1, or User 2 mode is selected up in the Preset Mode
sub-menu item.
4.
5.
Press
Press
/
to select an picture mode that is closest to your need.
to select a menu item to be changed and adjust the value with
/
6.
7.
When all settings have been done, highlight Save Settings and press Mode/
Enter to store the settings.
The confirmation message 'Setting Saved' displays.
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted
wall which may not be white, the Wall Color feature can help correct the projected
picture’s color to prevent possible color difference between the source and
projected pictures.
To use this function, go to the DISPLAY > Wall Color menu and press
/
to
select a color which is the closest to the color of the projection surface. There are
several precalibrated colors to choose from: Light Yellow, Pink, Light Green,
Blue, and Blackboard
34
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions
available when User 1 or User 2 is selected. You can make adjustments to these
functions based on your needs.
Adjusting Brightness
Highlight Brightness in the PICTURE menu and
adjust the values by pressing
projector or remote control.
/
on the
+50
+70
+30
The higher the value, the brighter the image. And
lower the setting, darker the image. Adjust this
control so the black areas of the image appear
just as black and that detail in the dark areas is
visible.
Adjusting Contrast
Highlight Contrast in the PICTURE menu and
adjust the values by pressing
projector or remote control.
/
on the
+50
+70
+30
The higher the value, the greater the contrast.
Use this to set the peak white level after you have
previously adjusted the Brightness setting to suit
your selected input and viewing environment.
Adjusting Color
Highlight Color in the PICTURE menu and adjust the values by pressing
the projector or remote control.
/
on
Lower setting produces less saturated colors; setting to the minimum value makes
the image black and white. If the setting is too high, colors on the image will be
overpowering, which makes the image unrealistic.
Adjusting Tint
Highlight Tint in the PICTURE menu and adjust the values by pressing
the projector or remote control.
/
on
The higher the value, the more reddish the picture becomes. The lower the value,
the more greenish the picture becomes.
Adjusting Sharpness
Highlight Sharpness in the PICTURE menu and adjust the values by pressing
/
on the projector or remote control.
The higher the value, the sharper the picture becomes. The lower the value, the
softer the picture becomes.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Adjusting BrilliantColor™
Highlight BrilliantColor™ in the PICTURE menu and select by pressing
the projector or remote control.
/
on
This feature utilizes a new color-processing algorithm and system level
enhancements to enable higher brightness while providing truer, more vibrant
colors in picture. It enables a greater than 50% brightness increase in mid-tone
images, which are common in video and natural scenes, so the projector
reproduces images in realistic and true colors. If you prefer images with that quality,
select On. If you don’t need it, select Off.
On is the default and recommended selection for this projector.
Selecting a color temperature
Highlight Color Temperature in the PICTURE menu and adjust the values by
pressing
/
on the projector or remote control.
There are four color temperature* settings available.
1.
T1: With the highest color temperature, T1 makes the image appear the most
bluish white than other settings.
2.
3.
4.
T2: Makes images appear bluish white.
T3: Maintains normal colorings for white.
T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be "white" for various
purposes. One of the common methods of representing white color is known as the
“color temperature”. A white color with a low color temperature appears to be
reddish white. A white color with a high color temperature appears to have more
blue in it.
3D Color Management
In most installation situations, color management will not be necessary, such as in
classroom, meeting room, or lounge room situations where lights remain on, or
where building external windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms,
lecture theaters, or home theaters, should color management be considered. Color
management provides fine color control adjustment to allow for more accurate color
reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible
viewing conditions. You will need to use a colorimeter (color light meter), and
provide a set of suitable source images to measure color reproduction. These tools
are not provided with the projector, however, your projector supplier should be able
to provide you with suitable guidance, or even an experienced professional
installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted.
When you select each color, you can independently adjust its range and saturation
according to your preference.
If you have purchased a test disc which contains various color test patterns and can
be used to test the color presentation on monitors, TVs, projectors, etc. You can
project any image from the disc on the screen and enter the 3D Color
Management menu to make adjustments.
36
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
To adjust the settings:
1.
2.
3.
Go to the PICTURE menu and highlight 3D Color Management.
Press Mode/Enter and the 3D Color Management page displays.
Highlight Primary Color and press
Yellow, Green, Cyan, Blue, or Magenta.
Press to highlight Hue and press
/
to select a color from among Red,
4.
/
to select its range. Increase in the
range will include colors consisted of more proportions of its two adjacent
colors.
Please refer to the illustration to the right for
how the colors relate to each other.
For example, if you select Red and set its
Yellow
RED
GREEN
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
Cyan
Magenta
5.
Press
its values to your preference by pressing
. Every adjustment made will reflect to
to highlight Saturation and adjust
BLUE
/
the image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red
will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.
6.
Press
/
to highlight Gain and adjust its values to your preference by pressing
. This will affect the contrast level of the primary color selected. Every
adjustment made will be reflected to the image immediately.
Make sure you have carried out all of the desired adjustments.
Press Menu/Exit to exit and save the settings.
7.
8.
9.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1.
Go to the SYSTEM SETUP: Basic >
Presentation Timer menu and press Mode/
Enter to display the Presentation Timer
page.
Presentation Timer
Timer Period
15
Timer Display
Always
Top-Left
Count Down
Off
Timer Position
Timer Counting Direction
Sound Reminder
On
Off
2.
Highlight Timer Period and decide the time
MENU Back
period by pressing
can be set from 1 to 5 minutes in 1-minute
increments and 5 to 240 minutes in 5-minute increments.
/
. The length of time
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3.
Press
to highlight Timer Display and choose if you want the timer to show
up on the screen by pressing
/
.
Selection
Always
Description
Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
4.
5.
Press
/
to highlight Timer Position and set the timer position by pressing
.
Top-Left
Press
Bottom-Left
Top-Right
Bottom-Right
to highlight Timer Counting Direction and select your desired
counting direction by pressing
/
.
Selection
Count Up
Count down
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
6.
Press
to highlight Sound Reminder and decide if you want to activate
. If you select On, a double beep sound will
sound reminder by pressing
/
be heard at the last 30 seconds of counting down/up, and a triple beep sound
will be produced when the timer is up.
7.
8.
To activate the presentation timer, press
and press Mode/Enter.
A confirmation message displays. Highlight Yes and press Mode/Enter to
confirm. You will see the message “Timer is On” displaying on the screen.
The timer start counting at the time the timer is on.
and press
/
to highlight On
38
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the timer, perform the following steps.
1.
Enter the SYSTEM SETUP: Basic > Presentation Timer menu and highlight
Off. Press Mode/Enter. A confirmation message displays.
Highlight Yes and press Mode/Enter to confirm. You will see the message
“Timer is Off” displaying on the screen.
2.
Locking control keys
With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When the
Panel Key Lock is on, no control keys on the projector will operate except Power.
1.
Press
/
on the projector or remote
control or go to the SYSTEM SETUP: Basic
> Panel Key Lock menu, and select On by
pressing
/
on the projector or remote
control. A confirmation message displays.
Highlight Yes and press Mode/Enter to
confirm.
2.
To release panel key lock, press and hold
/
on
the remote control or projector for 3 seconds.
You can also use the remote control to enter the
SYSTEM SETUP: Basic > Panel Key Lock
menu and press
/
to select Off.
•
•
Buttons on the remote control are still in use when
panel key lock is enabled.
If you press Power to turn off the projector without
disabling panel key lock, the projector will still be in
locked status the next time it is turned on.
Freezing the image
Press
on the remote control to freeze the
image. The word 'FREEZE' will display on the
screen. To release the function, press any button
on the projector or remote control.
Even if an image is frozen on the screen, the
pictures are running on the video or other device.
If the connected devices have active audio output,
you will still hear the audio even though the image
is frozen onscreen.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Hiding the image
In order to draw the audience's full attention to the
presenter, you can use BLANK on the projector or
remote control to hide the screen image. The word
'BLANK' appears in the corner of the screen while
the image is hidden. When this function is activated
with an audio input connected, the audio can still be
heard.
Once BLANK is pressed, the projector lamp enters
Economic mode automatically.
You can set the blank time in the SYSTEM
SETUP: Basic > Blank Timer menu to let the
projector return the image automatically after a
period of time when there is no action taken on the
blank screen. The length of time can be set from 5
to 30 minutes in 5-minute increments.
CAUTION
Do not block the projection lens
from projecting as this could
cause the blocking object to
become heated and deformed or
even cause a fire.
If the preset time spans are not suitable for your
personation, select Disable.
No matter Blank Timer is activated or disabled,
you can press any key on the remote control to
restore the picture.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between
1500 m –3000 m above sea level, and temperature is between 0°C–35°C.
To activate the High Altitude Mode, go to the
SYSTEM SETUP: Advanced > High Altitude
Notice
We recommend you use the High
Mode, select On by pressing
/
on the
Altitude Mode by selecting it
whenever your environment is
higher than 1500 m.
projector or remote control. A confirmation
message displays. Highlight Yes and press
Mode/Enter.
Do you want to turn High Altitude
Mode on?
Yes
No
Operation under "High Altitude Mode" may
cause a higher decibel operating noise level
because of increased fan speed necessary to
improve overall system cooling and performance.
CAUTION
Do not use the High Altitude Mode
if your altitude is between 0 m and
1500 m and temperature is
between 0°C and 35°C. The
projector will be over cooled, if
you turn the mode on under such
condition.
If you use this projector under other extreme
conditions excluding the above, it may display
auto shut-down symptoms, which is designed to
protect your projector from over-heating. In cases
like this, you should switch to High Altitude mode
to solve these symptoms. However, this is not to
state that this projector can operate under any
and all harsh or extreme conditions.
40
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker.
Be sure you have made a correct connection to the projector audio input. See
"Connection" on page 13 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
1.
2.
3.
Press Menu/Exit and then press
menu is highlighted.
/
until the SYSTEM SETUP: Advanced
Press
or remote control. The Audio Settings page displays.
Highlight Mute and press to select On.
to highlight Audio Settings and press Mode/Enter on the projector
/
Adjusting the sound level
To adjust the sound level,
1.
2.
Press to highlight Volume and press
/
to select a desired sound level.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences.
The following settings do not affect the projection settings, operation, or
performance.
•
Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings
menu sets the length of time the OSD will remain active after your last button
press. The time length ranges from 5 to 30 seconds in 5-second increments.
Use
Menu Position in the SYSTEM SETUP: Advanced > Menu Settings menu
sets the OSD position in five locations. Use to select a preferred position.
Language in the SYSTEM SETUP: Basic menu sets your familiar language for
the On-Screen (OSD) Menus. Use to select your language.
Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo
screen to be displayed during projector start-up. Use to select a screen.
/
to select a suitable time.
•
•
•
/
/
/
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Shutting down the projector
I
1.
Press
Power and a confirmation
message will display prompting you.
If you don't respond in a few seconds, the
message will disappear.
I
2.
Press
Power a second time. The
Power indicator light flashes orange, the
projection lamp shuts down, and the fans
will continue to run for approximately 90
seconds to cool down the projector.
CAUTION
•
•
To protect the lamp, the projector will not respond
to any commands during the cooling process.
To shorten the cooling time, you can also activate
the Quick cooling function. See "Quick Cooling"
on page 48 for details.
3.
Once the cooling process finishes, the Power
indicator light is a steady orange and fans
stop. Disconnect the power cord from the wall
socket.
If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power
again to start the projector after the fans stop and the
Power indicator light turns orange.
42
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal
type selected.
Main menu Sub-menu
Options
Off/Light Yellow/Pink/Light
Green/Blue/Blackboard
4:3/16:9/Auto/Real
Wall Color
Aspect Ratio
1.
Keystone
Position
Phase
DISPLAY
H. Size
Digital Zoom
PC source: Brightest/Presentation/Photo/Cinema/
User 1/User 2
Video source: Brightest/Standard/Cinema/User 1/
User 2
Preset Mode
PC source: Brightest/Presentation/Photo/Cinema
Video source: Brightest/Standard/Cinema
Reference Mode
Brightness
Contrast
Color
2.
Tint
PICTURE
Sharpness
BrilliantColor™
On/Off
Color Temperature
Primary Color
T1/T2/T3/T4
R/G/B/Y/C/M
Hue
3D Color
Management
Saturation
Gain
Save Settings
Quick Auto Search
Color Space Conversion
On/Off
RGB/YUV
3. SOURCE
• Source
• Preset Mode
• Resolution
• Color System
6.
INFORMATION
Current System Status
• Equivalent Lamp Hour
Operation
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Period
Timer Display
1~240 minutes
Always/1 min/2 min/3 min/Never
Bottom-right/Top-right/Bottom-
left/Top-left
Presentation
Timer
Timer Position
Timer Counting
Direction
Count down/Count up
Sound Reminder On/Off
On/Off
4.
Language
SYSTEM
SETUP:
Basic
Front table/Rear table/Rear
ceiling/Front ceiling
Disable/5 min/10 min/15 min/20
min/25 min/30 min
Projector Position
Auto Power Off
Disable/5 min/10 min/15 min/20
min/25 min/30 min
Blank Timer
Panel Key Lock
Timer Controller
On/Off
Disable/30 min/1 hr/2 hr/3 hr/4
hr/8 hr/12 hr
Splash Screen
My Screen
Black/Blue/My Screen/InFocus
Quick Cooling
High Altitude Mode
On/Off
On/Off
On/Off
Mute
Audio Settings
Volume
Menu Display
Time
5 sec/10 sec/15 sec/20 sec/25
sec/30 sec
Center/Top-left/Top-right/Bottom-
right/Bottom-left
Menu Settings
5.
Menu Position
SYSTEM
SETUP:
Advanced
Lamp Mode
Lamp Settings Reset Lamp Timer
Normal/Economic
Equivalent Lamp Hour
Change Password
Security
Settings
Change Security Settings
• Power On Lock
• Splash Screen Lock
Reset All Settings
Note that the menu items are available when the projector detects at least one valid
signal. If there is no equipment connected to the projector or no signal detected,
limited menu items are accessible.
44
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY menu
FUNCTION
(default setting/
value)
DESCRIPTION
Correct the projected picture’s color when the projection surface
is not white. See "Fine-tuning the image quality in user modes"
on page 35 for details.
Wall Color
(Off)
There are four options to set the image's aspect ratio depending
on your input signal source. See "Selecting the aspect ratio" on
page 32 for details.
Aspect Ratio
(Auto)
Corrects any keystoning of the image. See "Correcting keystone"
on page 30 for details.
Keystone
(0)
Displays the position adjustment page. To move the projected
image, use the directional arrow buttons. The values shown on
the lower position of the page change with every button press
you made until they reach their maximum or minimum.
Position
(0)
Adjusts the clock phase to reduce image
distortion.
Phase
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
H. Size
(depends on the
selected input
source)
Magnifies or reduces the projected image. See "Magnifying and
details.
Digital Zoom
(100%)
SOURCE menu
FUNCTION
(default setting /
value)
DESCRIPTION
Quick Auto
Search
(On)
Color Space
Conversion
(RGB)
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
45
PICTURE menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 33 for details.
Preset Mode
(PC/DVI-A/DVI-D:
Brightest;
YPbPr/ S-Video/
Video: Standard)
Selects an picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See "Setting the User 1/User 2
mode" on page 34 for details.
Reference
Mode
Adjusts the brightness of the image. See "Adjusting Brightness"
on page 35 for details.
Brightness
Contrast
Adjusts the degree of difference between dark and light in the
Adjusts the color saturation level -- the amount of each color in a
Color
(0)
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 35 for details.
Tint
(0)
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 35 for details.
Sharpness
(15)
BrilliantColor™
(On)
When BrilliantColor™ is set to Off, the color temperature
adjustment will not function.
There are four color temperature settings are available. See
"Selecting a color temperature" on page 36 for details.
Color
Temperature
(T3)
3D Color
Management
Saves the settings made for User 1 or User 2 mode.
Save Settings
46
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETUP: Basic menu
FUNCTION
(default setting /
value)
DESCRIPTION
Reminds the presenter to finish the presentation within a certain
details.
Presentation
Timer
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 23 for details.
Language
The projector can be installed on a ceiling or behind a screen, or
details.
Projector
Position
(Front table)
This function allows the projector to turn off automatically if no input
signal is detected after a set period of time. See "Setting Auto
Power Off" on page 51 for details.
Auto Power
Off
(Disable)
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See "Hiding the
image" on page 40 for details.
Blank Timer
(Disable)
Disables or enables all panel key functions except Power on the
projector and buttons on the remote control. See "Locking control
keys" on page 39 for details.
Panel Key
Lock
(Off)
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Timer
Controller
(Disable)
Allows you to select which logo screen will display during projector
start-up. Four options are available: InFocus logo, Black screen,
Blue screen or My Screen.
Splash
Screen
(InFocus logo)
Captures and stores the projected picture as My Screen. See
"Creating your own startup screen" on page 28 for details.
My Screen
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
47
SYSTEM SETUP: Advanced menu
FUNCTION
(default setting /
value)
DESCRIPTION
Enables or disables the Quick Cooling function. Selecting On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 30 seconds.
Quick
Cooling
(On)
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 40 for details.
High Altitude
Mode
(Off)
Mute (Off)
Volume (5)
Audio
Settings
Menu Display Time (5 sec)
Sets the length of time the OSD will remain active after your last
button press. The range is from 5 to 30 seconds in 5-second
increments.
Menu
Settings
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp Mode (Normal)
Setting the projector in Economic mode also extends the lamp
timer automatic shutdown feature. See "Setting Lamp Mode as
Economic" on page 51 for details.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to
Lamp
Settings
Equivalent Lamp Hour
Displays the number of hours the lamp has been used. See
"Getting to know the lamp hour" on page 51 for details on how the
total lamp hour is calculated.
Change Password
You will be asked to enter the current password before changing to
details.
Security
Settings
Change Security Settings
Power On Lock (Off)
Splash Screen Lock (Off)
Returns all settings to the factory preset values.
Reset All
Settings
The following settings will still remain: Position, Phase, H. Size, User
1, User 2, Language, Projector Position, High Altitude Mode.
48
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
DESCRIPTION
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the PICTURE menu.
Current System
Status
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Operation
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular
basis is to keep the lens clean.
Never remove any parts of the projector except the lamp. Contact your dealer if
other parts need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
•
•
Use a canister of compressed air to remove dust.
If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with
lens cleaner and gently wipe the lens surface.
CAUTION
Never rub the lens with abrasive materials.
Cleaning the projector case
Before you clean the case, turn the projector off using the proper shutdown
power cord.
•
•
To remove dirt or dust, wipe the case with a soft, lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral
pH detergent. Then wipe the case.
CAUTION
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the
case.
Storing the projector
If you need to store the projector for an extended time, please follow the
instructions below:
•
Make sure the temperature and humidity of the storage area are within the
recommended range for the projector. Please refer to "Specifications" on page
58 or consult your dealer about the range.
•
•
•
Retract the adjuster feet.
Remove the batteries from the remote control.
Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
When you carry the projector yourself, please use the original box or provided soft
carry case.
50
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is
automatically calculated by the built-in timer. The method of calculating the
equivalent lamp hour is as follows:
Total (equivalent) lamp hour
= 1 (hours used in Economic mode) + 4/3 (hours used in normal mode)
The lamp hour in Economic mode is calculated as 3/4 of that in normal mode. That
is, using the projector in Economic mode helps to extend the lamp hour by 1/3.
To obtain the lamp hour information:
1.
Press Menu/Exit and then press
/
until the SYSTEM SETUP: Advanced
menu is highlighted.
2.
Press to highlight Lamp Settings and press Mode/Enter. The Lamp
Settings page displays.
4.
5.
You will see the Equivalent Lamp Hour information displaying on the menu.
To leave the menu, press Menu/Exit.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item that normally can last up to 3000-4000
hours with proper usage. To keep the lamp life as long as possible, you can do the
following settings via the OSD menu.
•
Setting Lamp Mode as Economic
Using Economic mode reduces system noise and power consumption by 20%. If
the Economic mode is selected, the light output will be reduced and result in
darker projected pictures.
Setting the projector in Economic mode also extends the lamp operation life. To
set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings >
Lamp Mode menu and press
/
.
•
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is
detected after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off
menu and press
/
. The time period can be set from 5 to 30 minutes in 5-minute
increments. If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time period.
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Timing of replacing the lamp
When the Lamp indicator lights up red or a message appears suggesting it is time
to replace the lamp, please install a new lamp or consult your dealer. An old lamp
may cause a malfunction in the projector and in some instances the lamp may
explode.
CAUTION
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator
still lights up after turning the power back on, please contact your dealer. See "Indicators" on
page 56 for details.
The following Lamp warning displays will remind you to change the lamp.
Status
Message
The lamp has been in operation for 3000
hours. Install a new lamp for optimal
performance. If the projector is normally run
with "Economic Mode" selected (See "Lamp
Mode (Normal)" on page 48), you may
continue to operate the projector until the
3950 hour lamp warning appears.
Notice
Order Replacement Lamp
Lamp > 3000 Hours
OK
The lamp has been in operation for 3950
hours. A new lamp should be fitted to avoid
the inconvenience when the projector runs
out of lamp time.
Notice
Replace Lamp Soon
Lamp > 3950 Hours
OK
The lamp has been in operation for 4000
hours.
Notice
Replace Lamp Now
It is strongly recommended that you replace
the lamp at this age. The lamp is a
Lamp > 4000 Hours
Lamp usage time exceeded
consumable item. The lamp brightness
diminishes with use. This is normal lamp
behavior. You can replace the lamp whenever
you notice that the brightness level has
significantly diminished. If the lamp is not
replaced beforehand, it must be replaced
after 3000 hours usage.
OK
The lamp MUST be replaced before the
projector will operate normally.
Notice
Out of Lamp Usage Time
Replace lamp (refer to reference guide)
Then reset lamp timer
OK
52
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the lamp
WARNING
Hg - Lamp contains mercury. Manage in accordance with local
•
•
•
•
•
•
To reduce the risk of electrical shock, always turn the projector off and disconnect the
power cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes
before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components, use caution
when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality by touching
the lens, do not touch the empty lamp compartment when the lamp is removed.
To assure optimal performance from the projector, it is recommended that you purchase
the InFocus projector lamp for lamp replacement.
If lamp replacement is performed while the projector is suspended upside-down from the
ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury
or damage to the human eyes caused by fractured lamp.
1.
2.
Turn the power off and disconnect the projector from the wall socket. If the
lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp
has cooled.
Use a coin to turn the screw
counterclockwise until the lamp cover
loosens.
3.
Remove the lamp cover from the
projector.
WARNING
•
•
Do not turn the power on with the lamp cover
removed.
Do not insert your fingers between the lamp and
the projector. The sharp edges inside the
projector may cause injuries.
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
53
4.
Loosen the screw that secures the lamp.
5.
Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
CAUTION
•
•
Pulling it too quickly may cause the lamp to break
and scatter broken glass in the projector.
Do not place the lamp in locations where water
might splash on it, children can reach it, or near
flammable materials.
•
Do not insert your hands into the projector after
the lamp is removed. If you touch the optical
components inside, it could cause color
unevenness and distortion of the projected
images.
6.
As shown in the figure, lower the new
lamp first into the connector on the
projector and align the two holes on the
projector.
54
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
Tighten the screw that secures the lamp.
CAUTION
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screw.
8.
Ensure the handle is fully laid flat and
locked in place.
9.
Replace the lamp cover on the projector.
10. Use a coin to turn the screw clockwise
until the lamp cover is secured.
CAUTION
•
•
Loose screw may cause a bad connection, which
could result in malfunction.
Do not over tighten the screw.
11. Restart the projector.
Resetting the lamp timer
12. After the startup logo, open the On-
Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp
Settings menu. Press Mode/Enter. The
Lamp Settings page displays. Highlight
Reset Lamp Timer. A warning message
displays asking if you want to reset the
lamp timer. Highlight Reset and press
Mode/Enter. The lamp time will be reset
to '0'.
Notice
Reset Lamp Timer?
Reset
Cancel
CAUTION
•
Do not reset if the lamp is not new or replaced as
this could cause damage.
Maintenance
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators
Light
Status & Description
Power Temp
Power events
Lamp
The projector has just been connected to a power outlet
or the lamp door is open.
Orange Orange Orange
Orange
Off
Off
Off
Off
Off
Off
Stand-by mode.
Green
Flashing
Powering up.
Green
Normal operation.
1.
The projector needs 90 seconds to cool down as it
was abnormally shut down without the normal
cooling down process. Or
Orange
Flashing
Off
Off
Off
2.
The projector needs to cool for 90 seconds after the
power is turned off.
The projector has shutdown automatically. If you try to
re-start the projector, it will shutdown again. Please
contact your dealer for assistance.
Orange
Flashing
Off
Lamp events
Orange
The projector has shutdown automatically. If you try to
re-start the projector, it will shutdown again. Please
contact your dealer for assistance.
Off
Red
Red
Flashing
1.
2.
The projector needs 90 seconds to cool down. Or
Please contact your dealer for assistance.
Off
Off
Thermal events
Off
Off
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Green
Green
Off
Red
Off
Green
Orange
Red
Off
Red
Red
Green
Orange
Red
Red
The projector has shutdown automatically. If you try to
re-start the projector, it will shutdown again. Please
contact your dealer for assistance.
Green
Green
Green
Orange
Orange
Orange
Off
Green
Orange
Red
Green
Orange
Red
Off
Green
56
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The projector does not turn on.
Cause
Remedy
Plug the power cord into the AC inlet on the
projector, and plug the power cord into the
power outlet. If the power outlet has a switch,
make sure that it is switched on.
There is no power from the power
cable.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
No picture
Cause
Remedy
The video source is not turned on or
connected correctly.
Turn the video source on and check that the
signal cable is connected correctly.
The projector is not correctly
connected to the input source device.
Check the connection.
Select the correct input signal with the
SOURCE key on the projector or remote
control.
The input signal has not been
correctly selected.
The lens cover is still closed.
Blurred image
Cause
Open the lens cover.
Remedy
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus
ring.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as
well as the height of the unit if necessary.
The lens cover is still closed.
Open the lens cover.
Remote control does not work
Cause
Remedy
The batteries are out of power.
Replace the batteries with new ones.
There is an obstacle between the
remote control and the projector.
Remove the obstacle.
You are too far away from the
projector.
Stand within 8 meters (26 feet) of the
projector.
The password is incorrect
Cause
Remedy
Please see "Entering the password recall pro-
cedure" on page 26 for details.
You do not remember the password.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Control
Resolution
USB serial control
Type mini B
1024 x 768 XGA
Display system
1-CHIP DMD
RS-232 serial control
Mini Din 8 pin x 1
Lens F/Number
F=2.42 (fixed)
Input terminals
Lamp
Computer input
RGB input
200 W lamp
D-Sub 15-pin (female) x 1
DVI-I input
Electrical
Video signal input
S-VIDEO
Power supply
AC100–240V, 3.2A, 50-60 Hz
(Automatic)
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
Power consumption
365 W (Max); 5 W (Standby)
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital - DVI (supports HDCP)
Mechanical
Weight
Audio signal input
Audio in
8.8 lbs (4.0 Kg)
PC audio jack
Output terminals
RGB output
Environmental Requirements
D-Sub 15-pin (female) x 1
Operating temperature
0°C–40°C at sea level
Speaker
(Stereo) 2 watt x 1
Operating relative humidity
12VDC (Max. 1A)
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)—
58
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
274.87 mm (W) x 131.30 mm (H) x 304.99 mm (D)
274.87
304.99
131.30
48.57
74.30
Timing chart
Supported timing for PC (including DVI-D) input
Horizontal
Resolution Frequency Frequency Frequency
(kHz) (Hz) (MHz)
Vertical
Pixel
Mode
31.469
59.940
25.175
VGA_60
VGA_72
VGA_75
VGA_85
720 x 400_70
SVGA_60
SVGA_72
SVGA_75
SVGA_85
XGA_60
XGA_70
XGA_75
XGA_85
SXGA_60
SXGA_60
SXGA_60
480i
37.861
37.500
43.269
31.469
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.667
47.77
49.65
63.981
15.75
72.809
75.000
85.008
70.087
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
60.09
59.96
60.020
60
31.500
31.500
36.000
28.3221
40.000
50.000
49.500
56.250
65.000
75.000
78.750
94.500
80.768
83.458
108.000
13.51
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 768
1280 x 800
1280 x 1024
31.47
15.63
31.25
37.50
45.00
33.75
60
50
50
50
60
60
27
480p
576i
576p
720p_50
720p_60
1035i
13.500
27.000
74.25
74.25
74.25
VIDEO
(HDCP)
67.5
28.13
33.75
67.5
60
50
60
60
148.5
74.25
74.25
148.5
1035p
1080i_50
1080i_60
1080p
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Supported timing for Component-YPbPr input
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Signal Format
480i(525i)@60Hz
480p(525p)@60Hz
576i(625i)@50Hz
576p(625p)@50Hz
720p(750p)@60Hz
720p(750p)@50Hz
1080i(1125i)@60Hz
1080i(1125i)@50Hz
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
Supported timing for Video and S-Video inputs
Color sub-
carrier
Frequency
(MHz)
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Video mode
NTSC
PAL
SECAM
PAL-M
PAL-N
PAL-60
NTSC4.43
15.73
15.63
15.63
15.73
15.63
15.73
15.73
60
50
50
60
50
60
60
3.58
4.43
4.25 or 4.41
3.58
3.58
4.43
4.43
60
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright information
Copyright
Copyright 2008 by InFocus Corporation. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission of InFocus Corporation.
Disclaimer
InFocus Corporation makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Further, InFocus
Corporation reserves the right to revise this publication and to make changes from
time to time in the contents hereof without obligation to notify any person of such
revision or changes.
*DLP, Digital Micromirror Device (DMD) and BrilliantColor™ are trademarks of
Texas Instruments. Others are copyrights of their respective companies or
organizations.
Copyright information
Download from Www.Somanuals.com. All Manuals Search And Download.
61
|