Installation Guide
Universal 5-Port Wi-Fi N Ethernet Hub
GWU647
PART NO. M1200
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Package Contents
4
5
System Requirements
Product Overview
6
Installation
8
Installation without WPS - Windows XP
Installation without WPS - Windows Vista
Installation without WPS - Windows 7
Installation without WPS - Mac
Manual Set Up
10
16
24
32
37
41
Firmware Upgrade
Federal Communications Commission (FCC)
Statement
46
47
48
49
50
CE Compliance
SJ/T 11364-2006
Limited Warranty
Contact
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
•
•
•
•
•
•
1 X Universal 5-Port Wi-Fi N Ethernet Hub
1 X AC to USB Power Cable
1 X AC to USB Power Adapter
1 X Ethernet Cable
1 X Quick Start Guide
1 x Warranty Card
4
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
•
Operating System
-
-
Windows XP, Windows Vista, Windows 7
Mac OS X v10.4 and above
•
•
Wireless network with WPS setup
Wireless network without WPS setup and computer
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
1. WPS Button
Push and hold the WPS button for
5~10 seconds to enable the WPS
feature.
2. Ethernet Port
The Ethernet port allows a LAN
connection through Cat 5 cables.
Supports auto-sensing at 10/100M
speed, half/ full duplex.
1
2
3
3. AC Power
AC Power Adapter
WPS
4. Reset Button
Push and hold the reset button for
5~10 seconds to reset the Wi-Fi
Hub to factory default setting
Reset
1
2
3
4
5
PWR
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Indicator State Description
1. LAN LED
Flashing - Data is transmitting or
receiving on the LAN interface.
On - Port linked.
Off – No link.
2. WPS LED
Flashing - The WPS feature is enabled
and in use.
Off - The WPS feature is not in use.
3. WLAN LED
Flashing - WLAN is transmitting or
receiving data.
Off - WLAN is off
4. Power LED
On - Power on.
Off - Power off.
1
2
3
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Step 2: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your device such as
Blu-ray player, HDTV, or game console.
Wireless Setup with WPS
Step 1: Power on your Universal WiFi Hub using
either of these methods:
Step 3: Refer to your wireless router’s user manual
to enable the WPS function, then press “WPS”
button on the back of WiFi Hub.
• Connect the AC Adapter cable to a device. Make
sure that the device where you connect the AC
Adapter cable is powered on.
Your installation is complete. If asked for the type
of connection, make sure “WIRED” is selected on
your device.
• Connect the WiFi Hub to an electrical outlet with
the included power adapter.
Note: It will take about 50 seconds to complete the
boot-up sequence. When complete, PWR (power)
LED will be active, and the WLAN Activity LED will
be blinking to show the WLAN interface is enabled.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3
WPS
Reset
1
2
3
4
5
PWR
Step 1
Step 2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation without WPS - Windows XP
Step 1: Turn off your computer’s wireless
connection (if applicable) and disconnect the
Ethernet cable currently connect to your computer
(if applicable).
Step 2: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your computer.
Step 3: Set your computer with a static IP address.
a. Right click on “My Network Places” and select
“Properties”.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Next, right click on “Local Area Connection”
and select “Properties”.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Select “Internet Protocol (TCP/IP)” then
select “Properties”.
D. Select “Use the following IP address” and
enter 192.168.1.3 in the IP address section.
Next enter 255.255.255.0 in the Subnet Mask.
Click OK.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Open your web browser and enter
192.168.1.252. This will bring up the configuration
utility. Click “Site Survey” to scan for your wireless
network.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Select the AP you want to connect to and enter the password if the network is secured. Click
the “Connect” button to establish the connection.
If your network security settings are set to not broadcast your SSID, then you will need to manually set
up the SSID and the wireless security (WEP or WPA). (Please see Page. 37)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Close your browser and change the
network settings on your computer back to DHCP
(Obtain an IP address Automatically & Obtain DNS
server address automatically). Refer to steps 3a
through 3d. Also do not forget to enable your
wireless connection if you disabled it.
Step 7: Disconnect the Ethernet cable from your
computer.
Step 8: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your device such as a
Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your Hub using the AC adapter.
The installation is complete. Your device is now
wireless. If the device asks for the type of internet
connection, make sure “WIRED” is selected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation without WPS - Windows Vista
Step 1: Turn off your computer’s wireless connection (if applicable) and disconnect the Ethernet cable cur-
rently connect to your computer (if applicable).
Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer.
Step 3: Set your computer with a static IP address.
a. Click the start button, the click on Control Panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Under Network and Internet, click “View network status and tasks”.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Under Tasks in the left pane, click “Manage
network connections”.
d. Next, right click on “Local Area Connection”
and click “Properties”.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
e. Next, select “Internet Protocol Version 4
(TCP/IPv4)” and click “Properties”
19
Download from Www.Somanuals.com. All Manuals Search And Download.
f. Select “Use the following IP address” and
enter 192.168.1.3 in the IP address section.
Next enter 255.255.255.0 in the Subnet Mask.
Click OK.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Open your web browser and enter 192.168.1.252. This will bring up the configuration utility. Click
“Site Survey” to scan for your wireless network.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Select the AP you want to connect to and enter the password if the network is secured. Click the
“Connect” button to establish the connection.
If your network security settings are set to not broadcast your SSID, then you will need to manually set up
the SSID and the wireless security (WEP or WPA). (Please see Page. 37)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Close your browser and change the
network settings on your computer back to DHCP
(Obtain an IP address Automatically & Obtain DNS
server address automatically). Refer to steps 3a
through 3d. Also do not forget to enable your
wireless connection if you disabled it.
Step 7: Disconnect the Ethernet cable from your
computer.
Step 8: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your device such as a
Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your Hub using the AC adapter.
The installation is complete. Your device is now
wireless. If the device asks for the type of internet
connection, make sure “WIRED” is selected.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation without WPS - Windows 7
Step 1: Turn off your computer’s wireless connection (if applicable) and disconnect the Ethernet cable cur-
rently connect to your computer (if applicable).
Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer.
Step 3: Set your computer with a static IP address.
a. Click the start button, the click on Control Panel.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Under Network and Internet, click “View network status and tasks”.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Under Tasks in the left pane, click “Change
Adapter Settings”.
d. Next, right click on “Local Area Connection”
and click “Properties”.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
e. Next, select “Internet Protocol Version 4
(TCP/IPv4)” and click “Properties”
27
Download from Www.Somanuals.com. All Manuals Search And Download.
f. Select “Use the following IP address” and
enter 192.168.1.3 in the IP address section. Next
enter 255.255.255.0 in the Subnet Mask. Click
OK.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Open your web browser and enter
192.168.1.252. This will bring up the configuration
utility. Click “Site Survey” to scan for your wireless
network.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Select the AP you want to connect and enter the password if the network is secured. Click “Con-
nect” button to establish the connection.
If your network security settings are set to not broadcast your SSID, then you will need to manually set up
the SSID and the wireless security (WEP or WPA). (Please see Page. 37)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Close your browser and change the
network settings on your computer back to DHCP
(Obtain an IP address Automatically & Obtain DNS
server address automatically). Refer to steps 3a
through 3d. Also do not forget to enable your
wireless connection if you disabled it.
Step 7: Disconnect the Ethernet cable from your
computer.
Step 8: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your device such as a
Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your Hub using the AC adapter.
The installation is complete. Your device is now
wireless. If the device asks for the type of internet
connection, make sure “WIRED” is selected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation without WPS - Mac
Step 1: Turn off your computer’s wireless con-
nection (if applicable) and disconnect the Ethernet
cable currently connect to your computer (if ap-
plicable).
Step 2: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your computer.
Step 3: Set your computer with a static IP address.
a. Open system preferences and select “Network”.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Select your Ethernet connection in the left pane.
Next change configure to Manual and enter
IP address 192.168.1.100 and Subnet Mask
255.255.255.0. Remove any entries in the
Router and DNS boxes then click Apply.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Open your web browser and enter
192.168.1.252. This will bring up the configuration
utility. Click “Site Survey” to scan for your wireless
network.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Select the AP you want to connect to and
enter the password if the network is secured. Click
the “Connect” button to establish the connection.
If your network security settings are set to not
broadcast your SSID, then you will need to
manually set up the SSID and the wireless security
(WEP or WPA). (Please see Page. 37)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Close your browser and change the network settings on your computer back to DHCP. Refer to
steps 3a through 3b.
Step 7: Disconnect the Ethernet cable from your computer.
Step 8: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your device such as a
Blu-Ray player, HDTV, or game colsole.
Step 9: Power on your Hub using the AC adapter.
The installation is complete. Your device is now wireless. If the device asks for the type of internet
connection, make sure “WIRED” is selected.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Set Up
If your network security settings are set to not broadcast your SSID, then you will need to manually
set up the SSID and the wireless security (WEP or WPA).
Step 1: Click “Manual WLAN Setup” to start the Setup Wizard
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Click “Next”
Step 3: Enter your networks SSID and click “Next”
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Enter your encryption information and
Step 5: The Universal Wi-Fi Hub will now reboot.
click “Finished”
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an
IP address Automatically & Obtain DNS server address automatically). Also do not forget to enable your
wireless connection if you disabled it.
Step 7: Disconnect the Ethernet cable from your computer.
Step 8: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your device such as a Blu-
Ray player, HDTV, or game colsole.
Step 9: Power on your Hub using the AC adapter.
The installation is complete. Your device is now wireless. If the device asks for the type of internet
connection, make sure “WIRED” is selected.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware Upgrade
Note: If a firmware update is available, it will be
posted on iogear.com. Please check
Step 1: Turn off your computer’s wireless
connection (if applicable) and disconnect the
Ethernet cable currently connect to your computer
(if applicable).
Step 2: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your computer.
Step 3: Set your computer with a static IP address.
Step 4: Open your web browser and enter
192.168.1.252. This will bring up the configuration
utility. Click the “Firmware Upgrade” button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Click “Browse” and located your firmware file, select it, and click “Open”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Click “Upload” to start the firmware upgrade process.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware update complete. Wait for the device to reboot before disconnecting.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Once the device is finished rebooting, you will see a
status screen. Check your settings. After a firmware
upgrade, the Universal Wifi Hub may reset back
to factory settings and need to be set up for your
network again.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if
not installed and used as directed, it may cause harmful interference to radio communications. Although this
product complies with the limits for a Class B digital device, there is no guarantee that interference will not
occur in a particular installation.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Compliance
This device has been tested and found to comply with the following European Union directives: Electro-
magnetic Capability (89/336/EMC), Low Voltage (73/23/EEC) and R&TTED (1999/5/EC).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SJ/T 11364-2006
The following contains information that relates to China.
有毒有害物质或元素
部件名称
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
铅 (Pb)
汞 (Hg)
镉（Cd）
六价 (Cr(VI))
电器部件
机构部件
●
○
○
○
○
○
○
○
○
○
○
○
○:表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006规定的限量要求之下。
●:表示符合欧盟的豁免条款，但该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006的限量要求。
×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006的限量要求。
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT,
DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to
the contents or use of this documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.The direct vendor also reserves the right to revise
or update the device or documentation without obligation to notify any individual or entity of such
revisions, or updates. For further inquiries please contact IOGEAR.
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
3. Call the tech support line at 1(866) 946-4327 (U.S. only) or (949) 453-8782.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact
IOGEAR
19641 Da Vinci
Foothill Ranch, CA 92610
P 949.453.8782
F 949.453.8785
®
© 2011 IOGEAR Part No. M1200
IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft
Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of
any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to
change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
About Us
FUN
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,
helping people enjoy daily life using our high technology products.
GREEN
IOGEAR is an environmentally conscious company that emphasizes the
importance of conserving natural resources. The use of our technology solutions
helps reduce electronic waste.
®
PART NO. M1200
© 2011 IOGEAR
Download from Www.Somanuals.com. All Manuals Search And Download.
|