IOGear Switch GCS1802 User Manual

Installation Guide  
Installation  
USB 2.0 KVMP Switch with OSD  
User Manual  
GCS1802 / GCS1804  
Part No. M1027  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Package Contents  
Requirements  
4
5
OSD operation  
26  
29  
30  
37  
38  
39  
OSD navigation  
OSD functions  
Cables  
6
Default Vs Alternate Manual switching  
OSD default settings  
Keyboard Emulation  
Operating systems  
Hardware  
7
8
Hardware set up  
Installation Diagram  
Before you begin  
Default Manual button operation  
Hotkey operation  
12  
14  
16  
18  
19  
Firmware Upgrade Utility  
Troubleshooting  
41  
48  
50  
51  
52  
54  
55  
Technical Support  
Limited Warranty Statement  
FCC Statement  
Port switching  
21  
22  
24  
24  
Summary of Default Hotkey Switch  
Auto Scanning  
CE Statement  
Contact  
Skip mode  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
1 x GCS1802 [GCS1804] KVMP Switch  
2 x Custom 6 ft USB KVM Cable sets with the GCS1802, or  
4 x Custom USB KVM Cable sets with the GCS1804 (2x 4ft and 2x 6ft)  
1 x USB-to-PS/2 keyboard / mouse converter cable  
1 x Firmware Upgrade Cable  
1 x Power Adapter  
1 x User Manual  
For parts damaged during shipping, or missing, please contact your dealer.  
Read this manual thoroughly. Follow the installation and operation procedures to prevent damage to  
the unit, and / or any of the devices connected to it. Refer to the 3 year limited warranty at the end of  
this manual for further information.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Requirements  
Console  
- VGA, SVGA, Multisync monitor or LCD display  
- USB or PS/2 Mouse  
- USB or PS/2 Keyboard  
Note: Due to the keyboard emulation used by the KVM for switching, programmable keys on some keyboards  
may not function  
Computers  
- A VGA, SVGA, DVI or Multisync card  
- A free USB Type A port or PS/2 mouse and keyboard connections  
Note: PS/2 cables must be purchased separately.  
USB sharing will not function with PS/2 KVM cables  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cables  
Only cable sets specically designed to work with this switch may be used to link the computers. Two 6 ft USB cables  
sets are provided with the GCS1802. Two 4ft USB cables and two 6ft USB cables are provided with the GCS1804.  
Both switches also support computers that use PS/2 keyboards and mice. Cable sets with PS/2 connectors, as  
well as longer cable sets are available from your dealer. See the following table for details:  
Connector  
USB (2.0)  
USB (2.0)  
PS/2  
Cable Length  
Part Number  
G2L-5301U  
G2L-5302U  
G2L-5301P  
G2L-5302P  
4 ft  
6 ft  
4 ft  
6 ft  
PS/2  
Note: The GCS1802 [GCS1804] USB peripheral sharing works only with USB cable sets. It will not work with the  
PS/2 cable sets.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supported Operating Systems  
OS  
Distribution  
Version  
2000 and higher  
Windows  
RedHat  
SuSE  
7.1 and higher; FedoraCore 2 and higher  
9.0 and higher  
Linux  
(Kernel 2.6 and higher)  
Mandriva  
9.0 and higher  
AIX  
4.3 and higher  
Unix  
FreeBSD  
Sun  
4.2 and higher  
Solaris 9 and higher  
5.0 and higher  
Novell  
MAC  
Netware  
OS 9.0 and higher  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware  
GCS1802 Front View  
GCS1804 Front View  
4
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
No. Component  
Description  
Pressing a front panel pushbutton focuses the switch on the computer attached to that  
port.  
1
Port Selection Pushbuttons  
The upper half is the KVM Port LED, the lower half is the USB LED.  
KVM:  
1. A dim Orange light indicates that the computer attached to the port is On  
Line (connected and powered).  
Port LEDs  
2
2. A bright Orange light indicates that the port is Selected.  
3. A ashing Orange light indicates that the port is being accessed under Auto  
Scan mode.  
USB:  
1. A dim Green light indicates that there is a USB cable connection between  
the computer and the port.  
2. A bright Green light indicate that the computer attached is accessing the  
USB peripherals.  
The connections for your main console microphone and speakers. These audio ports  
have priority over the ports in the rear panel.  
3
4
Audio Connectors  
Peripheral Port  
One of the two USB 2.0 peripheral ports (backwards compatible with USB 1.1).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GCS1802 Rear View  
GCS1804 Rear View  
1
5
3
4
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No.  
1
Component  
Description  
Firmware Upgrade  
USB Peripheral Port  
Power Jack  
The connection for the rmware upgrade cable.  
One of the two USB 2.0 peripheral ports (backwards compatible with USB 1.1)  
Connection for the power adapter  
2
3
Console Port Area  
Connections for your mouse, keyboard, monitor, and audio devices. Each  
connection has an appropriate icon for identication  
4
CPU Port Areas  
Connections for the KVM cables between your computers and the switch. Each  
KVM port is comprised of a microphone, speaker, and a special DB15 (yellow)  
connector for monitor, keyboard, and mouse.  
5
Note: The speical DB15 connectors have been designed to work with this switch (see the Cables section of this  
manual). Do NOT attempt to use ordinary 15-pin VGA connector cables to link these ports to the computers.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Setup  
Cable Connection  
Make sure that power to all the devices you will be connecting has been turned off, and power cords unplugged.  
To set up your KVM, refer to the installation diagram (Pg 14). The connections are color coded and / or marked with  
icons for easy installation.  
1. Connect your keyboard and mouse to the keyboard and mouse USB console ports located on the units  
back panel. If you are using the PS/2 converter, connect it to the keyboard port  
2. Connect your monitor to the Consoles monitor port located on the units rear panel  
3. Connect your microphone and speakers to the Consoles microphone and speaker jacks located on the  
units front or rear panel. The microphone and speakers connected to the front panel have priority over  
those plugged into the back panel  
4. Using one of the KVM cable sets provided, connect the custom DB15 (yellow) connector to a CPU port  
on the rear of the switch, and connect the accompanying microphone and speaker plugs to the KVMs  
microphone and speaker jacks  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. At the other end of the cable  
a. PS/2 connections: connect the keyboard, mouse, video, microphone and speaker cables to their  
respective ports on the computer  
b. USB connections: connect the USB, video, microphone and speaker cables to their respective ports on  
the computer. Repeat steps 4 and 5 for the other computer(s)  
6. Connect the power adapter that came with your switch to an AC power source, then connect the power  
adapter cable to the switchs Power Jack  
7. Connect your USB peripherals to the USB hub sections on the front and rear panels  
8. Turn power on the computers  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Diagram  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PS/2  
USB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you begin  
Port Numbering  
Each CPU port on the KVM is assigned a port number (1, 2 for the GCS1802 and 1,2,3,4 for the  
GCS1804). The CPU port numbers are marked on the rear panel of the switch.  
The Port ID of a computer is the same as the CPU port number on the KVM. For example, a computer  
connected to CPU port 2 has a Port ID of 2. The Port ID is used to specify which computer gets the KVM,  
USB hub, and audio focus when using the Hotkey or OSD direct port selection method.  
Hot Plugging  
The KVM supports USB hot plugging – with no need to shut the unit down, components can be removed  
and added to the installation by unplugging or connecting their cables from the USB hub ports.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Off and Restart  
If it becomes necessary to Power Off the KVM, do the following:  
1. Power off the switch.  
Unplug the KVM cables from the switchs rear panel.  
Unplug the switchs power cable.  
2. Wait 10 seconds, then reconnect the KVM cables.  
3. Reconnect the switchs power adapter.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Operation  
Pushbutton operation (Default method)  
1. Press a pushbutton once to bring only the KVM focus to the selected port (2 sec delay in switching).  
2. Press a pushbutton twice to bring the audio focus to the selected port (2 sec delay in switching).  
3. Press a pushbutton longer than 2 seconds to bring the KVM, Audio and USB focus simultaneously  
to the selected port.  
4. Press pushbuttons 1 and 2 simultaneously for 2 seconds to start the Auto Scan Mode.  
5. Press pushbuttons 3 and 4 simultaneously for 2 seconds to perform a keyboard and mouse reset.  
(GCS1804 only) It is equivalent to disconnecting and re connecting the devices.  
Note: When changing ports, the On Screen Display appears showing which ports the KVM, Audio, and  
USB are connected to ( the default duration is 3 secs).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hotkey Operation  
There are two aspects of Hotkey operation. Each of the following items performs a different function, but  
both are invoked from the keyboard. The following table denes these aspects.  
Function  
Description  
Port Switching  
A quick efcient, method for switching KVM focus, Audio, and/or USB  
Peripheral sharing ports between computers.  
On Screen Display (OSD)  
A window temporarily displayed on the monitor, that provides a means  
to invoke KVM switching, and congure the KVMs working environment.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following pages describe the invocation and use of these functions. For clarity, default settings will  
be used in describing Hotkey operations, the alternative hot keys will be discussed under the OSD  
section.  
If your keyboard does not have a Scroll Lock key, or you need to press ƒ ( function key) to use the Scroll  
Lock key, please refer to the OSD section for the alternate Port Switching mode.  
If you change to the alternate mode substitute [Ctrl] + [Ctrl] for [Scroll Lock] + [Scroll Lock] in the  
following steps  
Note: You can use either the left OR right Ctrl key, but not left AND right Ctrl keys  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Port Switching  
Port switching begins by tapping the Scroll Lock key twice [Scroll Lock], [Scroll Lock] then entering letters  
and numbers for precise control.  
To increment the KVM by one port: [Scroll Lock] [Scroll Lock] [Enter]. The console (KVM focus) , audio,  
and both peripheral ports increment to the next higher port  
Note: Audio and Peripherals switch to the same port as the console regardless of where they were  
prior to invocation.  
To increment only the audio: [Scroll Lock] [Scroll Lock] [S] [Enter].  
To increment only the peripherals: [Scroll Lock] [Scroll Lock] [U] [Enter]  
To Switch the focus, audio, and peripherals to a specic port: [Scroll Lock] [Scroll Lock] [n] [Enter]  
n = the port number you wish to access 1,2,3, or 4  
Note: The USB peripheral ports are lock together, they cannot be switched independently.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Summary of default Hotkey switching [Tip: K= KVM (focus), S = sound , U = USB (peripherals)]  
Hotkey sequence  
Result  
KVM, Audio, Peripheral increment one Port  
KVM, Audio, Peripheral switch to Port n  
KVM focus only, switches to Port n  
Peripherals only, switch to Port n  
Audio only, switches to port n  
[Scroll Lock], [Scroll Lock], [Enter]  
[Scroll Lock], [Scroll Lock], [n], [Enter]  
[Scroll Lock], [Scroll Lock], [n],[K], [Enter]  
[Scroll Lock], [Scroll Lock], [n],[U], [Enter]  
[Scroll Lock], [Scroll Lock], [n],[S], [Enter]  
[Scroll Lock], [Scroll Lock], [n],[K], [U] [Enter]  
[Scroll Lock], [Scroll Lock], [n],[K],[S], [Enter]  
[Scroll Lock], [Scroll Lock], [n],[S],[U] [Enter]  
[Scroll Lock], [Scroll Lock], [K], [Enter]  
[Scroll Lock], [Scroll Lock], [U], [Enter]  
KVM and Peripheral switch to Port n  
KVM and Audio switch to Port n  
Audio and Peripheral switch to Port n  
KVM focus increments one port  
Peripherals increment one port  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hotkey sequence  
Result  
Audio increments one port  
[Scroll Lock], [Scroll Lock], [S], [Enter]  
[Scroll Lock] [Scroll Lock] [A] [Enter]  
Starts Auto Scan. The KVM cycles from port to port at the  
default 5 second interval.  
Starts Auto Scan. The KVM focus cycles from port to port  
[Scroll Lock] [Scroll Lock] [A] [N ] [Enter]  
at N second intervals. [N] can be numbers 1 through 99 in  
seconds  
Note: n is number of the port you wish to access, and must be used in both the two and four port KVMs  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Scanning:  
The KVMs Auto Scan feature automatically cycles the KVM focus through the computer ports at regular  
intervals. This allows you to monitor the computer activity without having to take the trouble of physically  
switching ports. Auto Scan skips unused ports. To exit Auto Scan Mode press [Esc] or [Spacebar].  
Note: While Auto Scan is in effect, ordinary keyboard and mouse functions are suspended – only Auto  
Scan Mode compliant keystrokes can be input. You must exit Auto Scan in order to regain normal  
control of the console. The audio and USB ports do not switch, but remain at the port in which Auto  
Scan was invoked  
Skip Mode  
This feature allows switching between computers to monitor them manually. You can dwell on a particular  
port for as long or as little as you like as opposed to Auto Scanning, which automatically switches after a  
xed interval. To invoke Skip, key in the following Hotkey combination:  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. [Scroll Lock] + [Scroll Lock] + [Arrow] Where [Arrow] refers to one of the Arrow keys. After you  
press [Arrow], you automatically enter Skip, you can switch ports as follows:  
Skips from the current port to the previous port.  
Skips from the current port to the next port.  
Skips from the current port to the last port (Port 4 on the GCS1804)  
Skips from the current port to the rst port (Port 1).  
Once you are in Skip, you can keep on skipping by pressing the Arrow keys. You do not have to use  
the [Scroll Lock] [Scroll Lock]combination again.  
While Skip is in effect, ordinary keyboard and mouse functions are suspended – only Skip compliant  
keystrokes can be input. You must exit Skip in order to regain normal control of the console.  
To exit Skip, press [Esc] or [Spacebar].  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Operation  
OSD Overview  
The On Screen Display (OSD) is a menu driven method to handle control and switching operations.  
All procedures start from the OSD Main Screen.  
To Access the OSD (default) :  
1. Hold down the Num Lock key  
2. Press and release the minus key  
3. Release the Num Lock key  
When you invoke the OSD, a screen similar to the one below appears:  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The table below explains the abbreviations and Icons found on the Display  
PN  
This column lists the Port ID numbers for the CPU ports in the installation. The simplest  
method to access a particular computer is move the Highlight Bar to its corresponding  
port, then press [Enter].  
KVM  
USB  
The Pointing Finger icon in this column indicates which computer has the console focus  
The Pointing Finger icon indicates the computer with the USB peripheral access.  
The Pointing Finger icon indicates which computer is supplying the audio.  
The Sun symbol in this column indicates which attached computers are “On Line”  
( Connected and powered on)  
Name Port names (if assigned) appear in this column. To edit or add a name, double click on  
the port in the NAME column, a pink grid will appear in which you can key a name. Press  
[Enter] to store the name. The system allows for the following characters in this function:  
A~Z, 0~9,+,-, :, ., [Space] and /.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Moves the highlight bar up  
Moves the highlight bar down  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Navigation  
To select a port, use the F1, F2, F3, or F7 Keys, or click on the Up and Down Arrow keys to move the  
Highlight Bar down the list on the screen. When the Highlight Bar is on the port, you want to switch to,  
press [Enter] or double click the left button of the mouse. The Pointing Finger icon will appear on the port  
selected, the OSD will disappear and the screen of the selected port will be displayed.  
You can also click on the KVM, USB, Audio and PN columns with the mouse to select a port. Using the  
mouse allows you to select single or multiple columns. Double clicking with the mouse or pressing [Enter]  
will activate the Highlight Bar. The Pointing Finger icon will appear on the port selected, the OSD will disap-  
pear, and the screen of the selected port will be displayed.  
Columns may also be selected by pressing the Tab key. Use the Up and Down Arrow keys to select the  
port number then press [Enter]. Alternatively, double click on the Highlight Bar. The Pointing Finger icon will  
appear on the port selected, the OSD will disappear and the screen of the selected port will be displayed.  
In the Name column, use the Tab key or Up and Down Arrow keys to select a port. Once a port has been  
selected, you can edit its name after double clicking with the mouse or pressing [Enter].  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Functions  
OSD functions are used to congure and control the KVM. For example, you can: rapidly switch to any  
port; scan ports; or create or edit a port name; or make OSD setting adjustments.  
To access an OSD function:  
1. Click a Function Key eld at the top of the Main Screen, or press a Function Key on the keyboard.  
2. Make your choice In the submenus that appear, by either Double Clicking it, or moving the Highlight  
Bar to it, then pressing [Enter].  
3. Press [Esc] to return to the previous menu level.  
F1: KVM  
To view the screen of the selected KVM port, press [F1] or move the cursor to F1:KVM and click.  
F2: USB  
To view the screen of the selected USB port, press [F2] or move the cursor to F2:USB and click.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F3: AUDIO  
To view the screen of the selected Audio port, press [F3] or move the cursor to F3:Audio and click.  
F4: SCAN  
Clicking the F4 eld or pressing, [F4] invokes AUTO SCAN.  
This function allows you to monitor the available computers automatically at a preset interval ( 5  
seconds being the default interval). The amount of time (dwell) that each Port displays is set with the  
Scan Duration setting under the F6 SET function.  
Auto Scanning will by-pass a CPU port if the computer is off line, or if the port is unoccupied.  
While Auto Scan is in effect, the mouse and keyboard will not function normally. You must exit Auto  
Scan in order to regain control.  
To exit Auto Scan, press the [Spacebar] or [Esc].  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F7: PN  
This function allows you to switch KVM, USB and Audio focus to one port. When you press [F7], or click  
on the F7: PN eld, you select the KVM, USB and Audio columns simultaneously, use the Up or Down  
Arrow key to select the desired Port Number. Press [Enter] or double click with the mouse. The Pointing  
Finger icon will appear on the port selected, the OSD will disappear and the screen of the selected port  
will be displayed.  
F6: SET  
This function allows you to set up your working environment. When you press [F6] or click on the F6 eld,  
a screen similar to the one below appears:  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change a setting:  
1. Double click, or move the Highlight Bar to your selection, and press [Enter].  
2. After you select an item, a submenu with further choices appears. To make a selection, either double  
click; or move the Highlight Bar to it, and press [Enter].  
An icon appears before the selected choice to indicate which one it is.  
Press [Esc] to return to the previous level.  
The settings are explained in the following table:  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOTKEY  
Selects which key sequence initiates Hotkey operations :  
[Scroll Lock] [Scroll Lock] (Default) or [Ctrl] [Ctrl] (Alternate).  
OSD HOTKEY  
BUTTON SETTINGS  
Selects which key sequence initiates the OSD  
[Num Lock] + [-] (Default) or [Ctrl] + [F12] (Alternate).  
Sets the Front Panel Pushbutton Switching Operation:  
For details, see the comparison chart at the end of this table.  
PORT DISPLAY DURATION  
SCAN DURATION  
Sets the time a Port number is displayed on the monitor after a port  
change. The user dened period is 0 to 255 seconds (3 secs. is default)  
Sets focus dwell per port as it cycles through in Auto Scan. Key in a value  
from 0 to 255 seconds (5 secs. is default)  
SCREEN BLANKER  
Blanks the screen after a selected period of time and may be set for  
password protection.  
HOTKEY COMMAND  
MODE  
Enables / Disables the Hotkey Command function to avoid conicts with  
programs running on the computer.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESTORE DEFAULT VALUES Used to undo all the changes and return to the factory default settings  
Note: assigned NAMES and passwords are not erased.  
CLEAR THE NAME LIST  
Used to undo all the changes and return to the factory default settings,  
including assigned NAMES and passwords.  
ACTIVATE BEEPER  
FIRMWARE UPGRADE  
PORT OS  
Enables / Disables the Beeper. The default setting is ON.  
Initiates the rmware upgrade utility  
Sets the OS for individual CPU ports to PC, SUN, or MAC it allows  
users to emulate special SUN, or MAC keys with a PC keyboard. Use  
the Arrow keys or click with the mouse to select the port. You can also  
use the Spacebar or double click with mouse to change the OS for  
individual ports. The emulation keys are listed at the end of this section  
MOUSE EMULATION  
LANGUAGE  
Enables / Disables the emulation function of the Console mouse port.  
If you disable this function, programmable mouse buttons will function.  
The default setting is ON.  
The OSD supports three Display Languages: English, Japanese and  
German. The default is English.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: Where entries are required, a Dialog box opens at the bottom of the On Screen Display asking for  
an entry i.e. yes / no, or numbers to set an interval time.  
Note: Programmable mouse buttons will pass through USB cables, but not PS/2 cables  
Screen Blanker  
1. Set Time Out interval  
2. Set the Screen lock to ON (Y, in the dialog box)  
3. Select Password, if no password has been set, [Enter] will allow you to set a password. If a password  
has been set type it in rst then [Enter]  
4. Type in the (new) password then conrm by reentering it.  
5. When the password is accepted “Password OK” appears on the display.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Default and Alternate manual switch settings  
MODE 1 (Default Setting)  
MODE 2 (Alternate)  
Press a pushbutton once to bring only the  
KVM focus to the computer attached to its  
corresponding port (in 2 secs).  
Press a pushbutton once to bring the KVM, Audio  
and USB focus simultaneously to the computer  
attached to its port (2 sec delay).  
Press a pushbutton twice to bring the  
audio focus to the computer attached to its  
corresponding port (in 2 secs).  
Press a pushbutton twice to bring the Audio focus to  
the computer attached to its corresponding port (2  
sec delay).  
Press a pushbutton for longer than 2 seconds Press a pushbutton longer than 2 seconds to bring  
to bring the KVM, Audio and USB focus  
simultaneously to the computer attached to  
its corresponding port.  
only the KVM focus to the computer attached to its  
corresponding port.  
Press pushbuttons 1 and 2 simultaneously for Press pushbuttons 1 and 2 simultaneously for 2  
2 seconds to start the Auto Scan Mode. seconds to start Auto Scan Mode.  
Press pushbuttons 3 and 4 simultaneously for Press pushbuttons 3 and 4 simultaneously for 2  
2 seconds to perform a keyboard and mouse  
reset.  
seconds to perform a keyboard and mouse reset.  
(GCS1804 only)  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Default settings for the On Screen Display  
Setting  
Default  
OSD Hotkey  
[Num Lock] + [-]  
[Scroll Lock] [Scroll Lock]  
Mode 1  
Keyboard Port Hotkey  
Button Settings  
Port Display Duration  
Scan Duration  
3 Seconds  
5 Seconds  
OFF (Disabled)  
OFF (Disabled)  
Not set [Enter]  
OFF (Disabled)  
ON  
Screen Blanker  
Set Timeout  
Screen Blanker Password  
Screen Lock  
Hotkey Command Mode  
Activate Beeper  
Port OS  
ON  
PC  
Mouse Emulation  
Language  
ON  
ENGLISH  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keyboard Emulation:  
The PC (101/104 key) keyboard can emulate a Mac or Sun keyboard. The mappings are listed in the table  
PC Keyboard  
[Shift]  
Mac Keyboard  
PC Keyboard  
[Print Screen]  
[Scroll Lock]  
Mac Keyboard  
Shift  
Ctrl  
F13  
F14  
=
[Ctrl]  
[Ctrl] [1]  
[Ctrl] [2]  
[Ctrl] [3]  
[Ctrl] [4]  
[Alt]  
[Enter]  
Return  
[Backspace]  
[Insert]  
Delete  
Help  
F15  
[Ctrl]  
[Alt]  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC Keyboard  
[Ctrl] [T]  
Sun Keyboard  
Stop  
PC Keyboard  
Sun Keyboard  
[Ctrl] [1]  
[Ctrl] [F2]  
[Ctrl] [F3]  
[Ctrl] [F4]  
[Ctrl] [F5]  
[Ctrl] [F6]  
[Ctrl] [F7]  
[Ctrl] [F8]  
[Ctrl] [F9]  
[Ctrl] [F10]  
Again  
Props  
Undo  
[Ctrl] [2]  
[Ctrl] [3]  
[Ctrl] [4]  
[Ctrl] [H]  
Front  
Copy  
Help  
Open  
Compose  
Paste  
Find  
Cut  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Firmware Upgrade Utility  
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides an automated process for  
upgrading the KVM switchs rmware. New rmware upgrade packages are posted on our web site as  
they become available. Check the web site regularly to nd the latest packages: http://www.iogear.com  
To prepare for the rmware upgrade, do the following:  
1. From a computer that is not part of the KVM installation go to our Internet support site and choose  
the model name of your device (GCS1802) to get a list of available Firmware Upgrade Packages.  
Note. The GCS1802 and GCS1804 share the same rmware.  
2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it  
to your computer.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Using the Firmware Upgrade Cable provided  
with this unit, connect a COM port (on the  
computer to which you down loaded the  
rmware) to the Firmware Upgrade Port of  
your switch.  
Computer with new rmware  
GCS1802 / GCS1804  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Enter OSD select F6, key down to “Firmware Upgrade” then [Enter] or Click. Or Key in Y (Yes) on  
the bottom of the display window and press [Enter].  
The “FIRMWARE UPGRADE IN PROGRESS” message will begin ashing on the screen.  
The front panel LEDs ash together to indicate rmware upgrade mode is in effect.  
The utility searches the computer attached to the rmware upgrade port for the le, and when found  
it is displayed in the Firmware Upgrade Utility under Device List.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting the Upgrade  
1. Run the downloaded Firmware Upgrade Package le – either by double clicking the le icon, or by  
opening a command line and entering the full path to it.  
The Firmware Upgrade Welcome screen appears  
2. Read the License Agreement (Click on the I Agree radio button).  
3. Click Next to continue. The Firmware Upgrade Utility main screen appears. The Utility inspects your  
installation. The KVM will be listed in the Device List panel.  
4. High Light the KVM, then click Next to perform the upgrade.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: If you enabled Check Firmware Version, the Utility compares the devices rmware level with that of  
the upgrade les. If it nds that the devices version is higher than the upgrade version, a dialog box  
appears informing you of the situation and gives you the option to Continue or Cancel.  
If you did not enable Check Firmware Version, the Utility installs the upgrade les without checking  
whether they are a higher level, or not.  
As the Upgrade, proceeds status messages appear in the Status Messages panel, and the progress  
toward completion is shown on the Progress bar.  
After the upgrade has completed, a screen appears to inform you that the procedure was successful.  
Click Finish to close the Firmware Upgrade Utility. After a successful completion, the switch exits  
Firmware Upgrade Mode, and reset itself.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Upgrade Failed  
If the “Upgrade Succeeded” screen does not appear, the upgrade failed to complete successfully, in  
which case you should do the following:  
1. Power off the KVM and remove its housing.  
2. Using a jumper, short the pins on the mainboard labeled J14. The diagrams indicate the jumper  
location on the GCS1802 / GCS1804 boards:  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Turn the power on the KVM. It is now set to the factory default rmware level.  
4. Leaving the jumper in place: Perform the rmware upgrade procedure again.  
5. When the upgrade procedure is complete, power off the switch, remove the jumper cap from J14,  
close the housing, and re-power the KVM.  
Disassembly:  
1. Remove the two screws on the bottom of the front panel.  
2. Slide the panel forward, be careful, there are switch extender buttons on the port selector switches  
that may fall off.  
3. Remove the two bottom screws that hold the chassis to the case  
4. Slide the unit out of the case.  
To reassemble reverse the above procedure.  
Note: Prior to tightening the front panel screws push the port selector buttons and listen for a for a “Click”  
indicating the extenders are in their correct positions, then shake the unit gently to ensure there are  
no loose items in side.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptom  
Possible Cause  
Action  
Improper mouse and/or  
keyboard reset.  
Unplug the cable(s) from the console  
port(s), then plug it/them back in.  
Mouse and/or Keyboard not  
responding.  
Power off all devices on the installation  
power off the KVM switch; wait ve  
seconds; then power up  
KVM switch needs to be  
reset.  
Unplug the devices USB cable from the  
USB port on the switchs rear panel, then  
plug it back in.  
USB devices not responding.  
Use the USB reset hotkey combination  
[Scroll Lock] [Scroll Lock] [F5]  
USB ports need to reset.  
1. Change the OS by selecting SPC  
mode in the PORT OS settings (see  
PORT OS in the OSD settings table)  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible Cause  
Action  
2. If the OS does not support USB  
2.0, change to the PS/2 interface.  
This will require cables that are not  
provided with the unit. See PS/2  
cable information under Cables in the  
beginning of this manual  
Windows timing problem.  
1. Unplug the KVM cable from the  
computers USB port.  
Device not recognized  
(Windows).  
2. Go into Windows’ System Settings and  
remove the Unknown Device entry.  
3. Plug the KVM cable back in. Windows  
will now recognize the device.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support  
If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/  
support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed to provide you  
with the latest technical information about our products. Most of the answers to your questions can be  
found here, so please try it out before contacting technical support.  
Technical support is available 24 X 7 and can be reached at 866-9-IOGEAR [ 866-946-4327]  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty Statement  
WE’RE HERE TO HELP YOU!  
NEED ASSISTANCE SETTING UP THIS PRODUCT?  
Make sure you:  
3. Call the 24/7 tech support line at 1(866) 946-4327 (U.S. only) or (949) 453-8782  
Warranty Information  
This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to  
Important Product Information  
Product Model _________________  
Serial # _______________________  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Federal Communications Commission (FCC) Statement  
15.21  
You are cautioned that changes or modications not expressly approved by the part responsible for  
compliance could void the users authority to operate the equipment.  
15.105(b)  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE  
FOLLOWING TWO CONDITIONS:  
1. this device may not cause interference and  
2. this device must accept any interference, including interference that may cause undesired operation of  
the device.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CE Statement  
This device has been tested and found to comply with the requirements set up in the council directive on  
the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Direc-  
tive 73/23/EEC and R&TTE Directive 99/5/EC.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact  
IOGEAR, INC.  
23 Hubble  
Irvine, CA 92618  
P 949.453.8782  
F 949.453.8785  
© 2008 IOGEAR. All Rights reserved. Part No. M1027  
IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are regis-  
tered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks  
of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this  
document. All information furnished here is for informational purposes only and is subject to change without notice.  
IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Us  
FUN  
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,  
helping people enjoy daily life using our high technology products.  
GREEN  
IOGEAR is an environmentally conscious company that emphasizes the  
importance of conserving natural resources. The use of our technology  
solutions helps reduce electronic waste.  
HEALTH  
IOGEAR supports healthy and t lifestyles. By integrating products with the  
latest scientic developments, IOGEARs solutions enhance the life of end-  
users.  
© 2007 IOGEAR, INC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Accessories 40A User Manual
Intellinet Network Solutions Digital Camera 550710 User Manual
Invacare Indoor Furnishings 9610 1 User Manual
Iomega Computer Drive Floppy plus 7 in 1 Card Reader USB Powered Drive User Manual
Jacuzzi Hot Tub BE30 LH User Manual
JVC Speaker System CA UXM5R User Manual
Kenwood Mixer HM790 User Manual
Kenwood Stereo Receiver KR V9090 User Manual
Kicker Speaker S10X User Manual
Kompernass Kitchen Utensil KH 550 User Manual