Installation Guide
Installation
Wireless-N USB adapter
GWU623
PART NO. M1209
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
System Requirements
4
Windows XP - Import and Export Profiles
Windows XP- Disable / Enable Wi-Fi
Windows XP- Profile Selection
Windows XP- Wireless Client Selection
WPS configuration
42
45
46
47
48
58
59
68
Package contents
5
How does it work
6
Windows XP software installation
Windows Vista software installation
Software Un-installation – Windows XP
Software Un-installation - Windows Vista
Connecting to a Wireless Network- XP
Connecting to a Wireless Network- Vista
7
16
22
23
24
27
31
Specifications
Glossary
Technical support
Federal Communications Commission (FCC) 69
Statement
Connecting to a Non-Broadcasting
Network – Vista
CE Statement
Limited Warranty
Contact
71
72
73
Windows XP– Add New Profile
35
37
39
Windows XP - Using WEP Encryption
Windows XP - Using WPA Security
3
Download from Www.Somanuals.com. All Manuals Search And Download.
System requirements
•
•
•
•
Available USB 2.0 port
Windows 2000, XP, and Vista
Minimum of 20 MB of free hard disk space
Minimum of 128 MB of RAM or higher
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Package contents
•
•
•
•
1 x Wireless LAN adapter
1 x Driver CD
1 x QSG
1 x Ethernet Cable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
How does it work
Wireless-N USB
adapter (GWU623)
Wireless router
Easily enjoy the Wireless-N USB adapter GWU623 up to 100 meters (328 feet).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows XP Software Installation
Before you start the installation,
make sure your GWU623 Wireless-N
USB adapter is NOT plugged into the
USB port of your computer. Please
plug in the adapter after the software
installation is completed.
1. Insert the installation CD into your CD-ROM,
it will automatically bring up the auto run
menu. Click Install to begin the software
installation.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a language preference and click Next
to continue.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click Next to continue
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. This screen shows the software License
Agreement, please choose “I accept the
terms of the license agreement” and click
Next to continue.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. It is recommended to choose Install Client
Utilities and Driver so you will be able
to enjoy all features and functions of the
product. Click Next to continue.
6. Do NOT plug the wireless adapter into the
USB port of your computer, click OK to
continue.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click Next to install the driver in the
designated folder. Or you may choose to
click “Browse” to select a different installation
folder.
8. Click Next to continue.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click Next to continue
10. Select Atheros Client Utility (ACU) and
supplicant, and click Next to continue.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
11. The Atheros client will ask you for permis
sion to reboot your computer once the
Atheros software has been installed. Click
Yes to continue.
12. Do NOT insert the adapter now, click OK to
close the window.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
12. You will need to restart your computer
once the installation has been completed.
Click Finish to complete installation and
restart your computer.
13. After the software installation has been
completed and you have restarted your
computer, insert the wireless USB adapter
into your computer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Vista Software Installation
Windows Vista
Before you start the installation, make sure your GWU623 Wireless-N USB adapter is not
plugged into the USB port of your computer. Please plug in the adapter after the software
installation is completed.
1. Insert the driver CD into the CD-ROM drive.
The AutoPlay window will appear, click Run
autorun.exe
Note: Windows Vista may ask you for permission
to run the installation software. To run the software
you will need to allow permission.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2. On the IOGEAR auto-run screen menu, click
on the Install button, then select Windows
Vista to Continue
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3. To begin the installation choose a setup
4. Click Next, to continue
language and click Next.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select I accept the terms of the license
agreement and click Next.
6. Click Yes to install the driver
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Do NOT insert the wireless USB adapter,
click OK to continue.
8. Click OK, to continue
20
Download from Www.Somanuals.com. All Manuals Search And Download.
9. The driver installation has been completed.
Click Finish to close the window.
10.After the software installation is completed,
insert the wireless USB adapter into your
computer. Windows will automatically install
the wireless USB adapter driver
Once driver installation has been completed
you will receive the following message.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Un-installation - XP
Windows XP
1. Go to Control Panel (Click on Start > Set-
tings > Control Panel)
2. Click on Add or Remove Programs
3. Click on Atheros Client Installation Program
and click on [Remove]
4. When the un-installation is completed, restart
your computer
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Un-installation - Vista
Windows Vista
1. Go to Control Panel (Start > Control Panel)
2. Click on Uninstall a program under Programs
or click on Programs and Features (control
Panel Classic View)
3. Click on the Atheros Client Installation
Program and click on [Uninstall] on the top.
4. When the un-installation is completed,
restart your computer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Wireless Network - XP
Windows XP
1. After the software installation has been
completed, you will see the Atheros icon on
the task bar. Right click on the
icon and
select Open Atheros Client Utility…
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click on Profile Management tab and click
on the Scan button to search for wireless
netowrks.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The scan will return a list of all available
networks and the details of these networks.
Select the wireless network that you would
like to connect and click Activate. After you
are successfully connected to the network,
you will see the network shows a different
icon as indicated below.
4. You are now connected to the network. Click
OK to close the window
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Wireless Network - Vista
Windows Vista
1. Click the network icon on the task bar and
select Connect to a network.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The next window will display a list of all
wireless networks around your area. Select
the network that you would like to connect
and click on the Connect button.
3. Select Connect Anyway to continue.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If the network you are connecitng has a
netowrk security key or passphrase, enter it
on the field box below and Click Connect to
continue.
5. Click Close once you have successfully
connected to the network.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the connection location that this
network will be used on.
7. Verify the settings and click Close to exit the
window
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Non-Broadcasting Network
Windows Vista
2. Click Set up a connection or network.
1. Click the network icon on the task bar and
select Connect to a network.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Manually connect to a wireless
network and click Next.
4. Click Next to continue.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Enter the information for the wireless
network you want to add, and check the
box Connect even if the network is not
broadcasting. Click Next to continue
Note: The Network name is the SSID, and it is
broadcasted by your router. You may look up
the SSID information by visiting your router’s
setup page.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click Close once the network has been
successfully added.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration – Add New Profile
Windows XP
2. Enter the name for the new profile and
the SSID of the network. The SSID is
broadcasted by your router. You may look
up that information by visiting your router’s
setup page.
1. To add a new configuration profile, click on
New on the Profile Management tab.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
3. If your network requires you to enter a
security code, please select the appropriate
security option and the passkey phrase.
Click OK to complete the setup.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Using WEP Encryption
Windows XP
2. Select the Security tab in the Profile
Management window, and choose the
1. To use WEP Passphrase security in the Athe-
ros Client Utility, select the network profile
that you would like to configure and click on
Modify on the right.
Pre-Shared Key (Static WEP) radio button
then click on Configure to continue.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Fill in the WEP Passphrase, click OK when
finished. You may choose the WEP Key Size
as you wish, and the length of your WEP key
will depends on the WEP Key Size that you
select.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Using WPA Security
Windows XP
1. To use WPA Passphrase security in the Athe-
ros Client Utility, select the network profile
that you would like to configure and click on
Modify on the right. Select the Security tab
in the Profile Management window. On the
Security tab, choose the WPA/WPA2 Pass-
phrase radio button, then click on Configure
to continue.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Fill in the Passphrase of your choice then
click OK when finished
3. To use the WPA/WPA2 security, click on
the WPA/WPA2 radio button, then click on
Configure to continue.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Input the information of your choice then
click OK to finish.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Import and Export Profiles
Windows XP
1. If you would like to import a profile that has
already been created, click on Import.
Browse to the directory where the profile is
located.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Browse to the directory where the profile
is located. Highlight the profile name then
Click Open.
3. If you would like to export a profile, highlight
the profile then click on Export to continue.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Browse to the directory to export the profile
to then Click Save to confirm. The profile is
now exported to the specified location
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Disable / Enable Wi-Fi
Windows XP
2. You may re-establish the Wi-Fi connection at
anytime by selecting Enable Radio
1. If you would like to disable a Wi-Fi
connection temporary, you may do so by
right clicking on the Atheros icon in the
system tray and selecting Disable Radio.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Profile Selection
Windows XP
To switch to a different network you will need to
right click on the Atheros icon and select profile.
Make sure that you select the network that you
would like to connect.
Please see page 10 to setup a new network
profile.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility Configuration - Wireless Client Selection.
Windows XP
If you would like to use the Windows wireless
client instead of the Atheros software, you may
do so by selecting, Select Client software from
the Atheros menu.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
WPS Installation
The Jumpstart application will allow you to setup Wi-Fi Protected setup (WPS) on your wireless network.
Using WPS will automatically configure a wireless network SSID, and setup WPA encryption and
authentication for your network. Please remember that your router must also support WPS.
On the IOGEAR installation CD, open the “JSW_Install_CD” folder, and double click on the setup.exe icon.
Follow the installation wizard, once completed you will find the Jumpstart icon on your desktop.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
WPS Configuration – Push Button
1. Double click on the Jumpstart icon
2. Select Join a wireless network and click
Next
Note: There are two ways to setup WPS. One
is by pushing the integrated WPS button on
your router and the other is by entering the
access PIN from your USB adapter to establish
the WPS encryption with your router.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
3. If your router has an integrated WPS button,
then select the Push Button selection to
continue.
4. Your router will prompt you to click the
integrated WPS button on your USB adapter
or the WPS button on your access point
(Router) setup interface.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Following the Jumpstart application, and
select Push the button on my access
point, click Next to continue.
6. The wizard will configure the wireless
network.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Once completed, click finish to close the
window.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
WPS Configuration - PIN Access
1. To setup WPS by entering PIN, you will need
to select Enter a PIN into my access
point or a registrar.
2. Locate the WPS configuration setup on your
WPS enabled access point (Router) and
select PIN number as the setup method.
3. Enter the PIN number that is given on the
Jumpstart Window into your WPS enabled
access point (Router) and click Next to
continue.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The wizard will configure the wireless
5. Click Finish to complete the setup.
network
54
Download from Www.Somanuals.com. All Manuals Search And Download.
WPS Configuration – PIN Access Part II
1. If you would like to setup WPS by entering
the PIN from your WPS enabled access
point (Router), select Enter the PIN from
my access point.
2. Your WPS enabled access point (Router) will
come with a specific PIN that will to be used
with the Jumstart application. Please check
with your access point (Router) user manual
if you can not locate the access point
(Router) PIN.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: Below is the screen shot on
setting up the WPS on Netgear WNR843B
router.
3. Enter the PIN on the Jumpstart setup wizard
and click Next to continue.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The wizard will configure the wireless
5. Click Finish to complete the setup.
network.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
GWU623
Standard
802.11b/g/n
Data Transfer Rate
Modulation Method
Frequency Band
Spread Spectrum
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120,180,240,270 and maximum of 300Mbps
BPSK/QPSK/16-QAM/64-QAM
2.4GHz ISM Band
IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g /n: OFDM
(Orthogonal Frequency Division Multiplexing)
RF Output Power
Operation Range
LED
< 14dBm@11n, <17dBm@11b, <14dBm@11g
Indoor@Up to 100 meters, Outdoor@Up to 280 meters
Power
OS Support
Win 2000 / XP / Vista
Security
64 bit/128 bit WEP, TKIP, AES
Power Consumption
Transmit: around 380 mA
Receive: around 250 mA
Operating Temperature 0 - 50° C ambient temperature
Humidity
5 to 90% maximum (non-condensing)
Dimension
3.5x1x0.37 inches
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
IEEE 802.11 Standard
The IEEE 802.11 Wireless LAN standards subcommittee, which is formulating a standard for the industry.
Access Point
An internetworking device that seamlessly connects wired and wireless networks together.
Ad Hoc
An Ad Hoc wireless LAN is a group of computers, each with a WLAN adapter, connected as an
independent wireless LAN. Ad Hoc wireless LAN is applicable at a departmental scale for a branch or
SOHO operation.
BSSID
A specific Ad Hoc LAN is called a Basic Service Set (BSS). Computers in a
BSS must be configured with the same BSSID.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
DHCP
Dynamic Host Configuration Protocol - a method in which IP addresses are assigned by server
dynamically to clients on the network. DHCP is used for Dynamic IP Addressing and requires a dedicated
DHCP server on the network.
Direct Sequence Spread Spectrum
This is the method the wireless cards use to transmit data over the frequency spectrum. The other
method is frequency hopping. Direct sequence spreads the data over one frequency range (channel) while
frequency hopping jumps from one narrow frequency band to another many times per second.
ESSID
An Infrastructure configuration could also support roaming capability for mobile workers. More than one
BSS can be configured as an Extended Service Set (ESS). Users within an ESS could roam freely between
BSSs while served as a continuous connection to the network wireless stations and Access Points within
an ESS must be configured with the same ESSID and the same radio channel.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Ethernet
Ethernet is a 10/100Mbps network that runs over dedicated home/office wiring. Users must be wired to
the network at all times to gain access.
Gateway
A gateway is a hardware and software device that connects two dissimilar systems, such as a LAN and a
mainframe. In Internet terminology, a gateway is another name for a router. Generally a gateway is used as
a funnel for all traffic to the Internet.
IEEE
Institute of Electrical and Electronics Engineers
Infrastructure
An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable
to enterprise scale for wireless access to central database, or wireless application for mobile workers.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
ISM Band
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the
so-called ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is
being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-
speed wireless capabilities in the hands of users around the globe.
Local Area Network (LAN)
A LAN is a group of computers, each equipped with the appropriate network adapter card connected by
cable/air, that share applications, data, and peripherals. All connections are made via cable or wireless
media, but a LAN does not use telephone services. It typically spans a single building or campus.
Network
A network is a system of computers that is connected. Data, files, and messages can be transmitted over
this network. Networks may be local or wide area networks.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Protocol
A protocol is a standardized set of rules that specify how a conversation is to take place, including the
format, timing, sequencing and/ or error checking.
Roaming
In an infrastructure network, this is when a wireless PC moves out of range of the previously connected
access point and connects to a newly connected access point. Throughout the network environment
where access point is deployed, PCs can always be connected regardless of where they are located or
roam.
SSID
A Network ID unique to a network. Only clients and Access Points that share the same SSID are able to
communicate with each other. This string is case-sensitive.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Simple Network Management Protocol (SNMP)
Simple Network Management Protocol is the network management protocol of TCP/IP. In SNMP,
agents-which can be hardware as well as software - monitor the activity in the various devices on
the network and report to the network console workstation. Control information about each device is
maintained in a structure known as a management information block.
Static IP Addressing
A method of assigning IP addresses to clients on the network. In networks with Static IP address, the
network administrator manually assigns an IP address to each computer. Once a Static IP address
is assigned, a computer uses the same IP address every time it reboots and logs on to the network,
unless it is manually changed.
Temporal Key Integrity Protocol (TKIP)
The Temporal Key Integrity Protocol, pronounced tee-kip, is part of the IEEE 802.11i encryption
standard for wireless LANs. TKIP is the next generation of WEP, the Wired Equivalency Protocol, which
is used to secure 802.11 wireless LANs. TKIP provides per-packet key mixing, a message integrity
check and a re-keying mechanism, thus fixing the flaws of WEP.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmission Control Protocol / Internet Protocol (TCP/IP)
TCP/IP is the protocol suite developed by the Advanced Research Projects Agency (ARPA). It is widely
used in corporate Internet works, because of its superior design for WANs. TCP governs how packet is
sequenced for transmission the network. The term “TCP/IP” is often used generically to refer to the entire
suite of related protocols.
Transmit / Receive
The wireless throughput in Bytes per second averaged over two seconds.
Wi-Fi Alliance
The Wi-Fi Alliance is a nonprofit international association formed in 1999 to certify interoperability of
wireless Local Area Network products based on IEEE 802.11 specification. The goal of the Wi-Fi Alliance’s
members is to enhance the user experience through product interoperability. The organization is formerly
known as WECA.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Wi-Fi Protected Access (WPA)
The Wi-Fi Alliance put together WPA as a data encryption method for 802.11 wireless LANs. WPA is an
industry-supported, pre-standard version of 802.11i utilizing the Temporal Key Integrity Protocol (TKIP),
which fixes the problems of WEP, including using dynamic keys.
Wide Area Network (WAN)
A WAN consists of multiple LANs that are tied together via telephone services and / or fiber optic cabling.
WANs may span a city, a state, a country, or even the world.
Wired Equivalent Privacy (WEP)
Now widely recognized as flawed, WEP was a data encryption method used to protect the transmission
between 802.11 wireless clients and APs. However, it used the same key among all communicating
devices. WEP’s problems are well-known, including an insufficient key length and no automated method
for distributing the keys. WEP can be easily cracked in a couple of hours with off-the-shelf tools.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless LAN (WLAN)
A wireless LAN does not use cable to transmit signals, but rather uses radio or infrared to transmit packets
through the air. Radio Frequency (RF) and infrared are the commonly used types of wireless transmission.
Most wireless LANs use spread spectrum technology. It offers limited bandwidth, usually under 11Mbps,
and users share the bandwidth with other devices in the spectrum; however, users can operate a spread
spectrum device without licensing from the Federal Communications Commission (FCC).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical support
If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear. com/
support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed to provide you
with the latest technical information about our products. Most of the answers to your questions can be
found here, so please try it out before contacting technical support. Technical support is available Monday
through Friday from 8:00 am to 5:00 pm PST and can be reached at (949) 453-8782 and (866) 946-4327
or by email support@iogear.com.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for com-
pliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation is subject to the following two conditions:
1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of
the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Statement
This device has been tested and found to comply with the requirements set up in the council directive on
the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive
73/23/EEC and R&TTE Directive 99/5/EC.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT,
DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to
the contents or use of this documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation without
obligation to notify any individual or entity of such revisions, or updates. For further inquires please
contact your direct vendor.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact
IOGEAR, INC.
23 Hubble
Irvine, CA 92618
P 949.453.8782
F 949.453.8785
Visit us at: www.iogear.com
©2008 IOGEAR. All Rights Reserved. PKG-M1209
IOGEAR and the IOGEAR logo are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are
registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc.
IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information
furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no
responsibility for any inaccuracies or errors that may appear in this
73
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
About Us
FUN
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,
helping people enjoy daily life using our high technology products.
GREEN
IOGEAR is an environmentally conscious company that emphasizes the
importance of conserving natural resources. The use of our technology
solutions helps reduce electronic waste.
HEALTH
IOGEAR supports healthy and fit lifestyles. By integrating products with
the latest scientific developments, IOGEAR’s solutions enhance the life of
end-users.
© 2007 IOGEAR, INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
|