Harrier 41 Electric
CODES
309C
311C
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO’s:
309C001001, 311C001001
ISSUE 28.09.04
HANDBOOK: 309054 (REV .0.)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1.2 Main Features/Specifications
1.3 Contents
1.19 - 1.22 Mower Maintenance
1.19
1.19
1.19
1.19
1.19
1.20
1.20
1.21
1.21
1.22
- Deck Housing
- Securing Nuts and Bolts
- Lubrication
- Motor
- Switch Control Unit
- Cutterblade Removal
- Cutterblade Assembly
- Cutterblade Sharpening
- Supply Cable
1.4 Introduction
1.5 Warranty
1.6 - 1.9 Safety Precautions
1.9 Safety Symbols
1.9 Decal Symbols
- Storage
1.10 Assembling the Mower
1.10
1.10
1.10
1.10
- Delivery Checklist
- Handlebar
- Grassbag Attachment
- Supply Cable
1.23 - 1.24 Trouble Shooting
1.25 Declaration of Conformity
1.26 - 1.27 Parts List
1.11 - 1.15 Operating The Mower
1.11
1.11
1.11
1.11
1.12
1.12
1.12
1.13
1.13
1.13
1.13
1.14
1.15
- Electrical Connections
- Starting
- Forward Travel
- Turning
- Stopping
- Height of Cut
- Before Mowing
- Grassbag
- Without Grass Collection
- Heavy Growth
- Non-Grassed Areas
- Safe Mower Practice
- Overloading Protection
1.28 Parts list Diagram
1.30 - 1.31 Notes
1.32 Customer Info
1.16 - 1.17
1.17
- Lawn Care Calendar - Guide Only
- Lawn Stripes
1.18 Maintenance Schedule
1.3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your mower.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting environment.
Use in any other way is considered as contrary to the intended use. Compliance with and strict
adherence to the conditions of operation, service and repair as specified in this handbook also
constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability
for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical performance
under normal mowing conditions. Correct operation and maintenance will ensure a long and
satisfactory service life. Prior to despatch from our factory every effort is made to ensure that
your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notifica-
tion.
1.4
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturer of major proprietry components ie. engines, gearbox /
transaxle (where applicable) furnish their own warranty and services are provided through their
authorised network. To qualify for the full benefit of the warranty, the warranty registration card
must be returned within 14 days of purchase. Subject to the conditions and exclusions noted in
this limited warranty, we shall at our option, repair or replace any warranted part during the
applicable period. If you are in doubt or experience any difficulty, please consult a Hayter
Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, brush/bristles, batteries and
other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake clutch (B.B.C) units and other such devices are not
applicable. Only machines fitted with a genuine Hayter friction disc, which are used in
accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner's Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop's Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages and
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Safety Alert Symbol
his safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Read the instructions carefully. Ensure that you are familiar with the con-
trols and the proper use of the equipment. Learn how to stop the mower
quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use
the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards occur-
ring to other people or their property.
Preparation
It is recommended that a high sensitivity Residual Current - Operated
Circuit - Breaker (RCCB) with a trip current of not more than 30mA is
installed at the mains power socket. This will provide the user with addi-
tional protection against electric shock. The fuse installed in the plug only
provides protection for the electrical equipment and will not safeguard
against electrocution. Always check the RCCB before using the mower.
WARNING: Regularly inspect the supply cable for signs of damage or
ageing. Replace immediately if defective.
Always wear substantial footwear and long trousers while mowing. Do
not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove all
stones, sticks, wires, bones and other foreign objects.
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Preparation
Always ensure that the mower is in a safe operating condition.
Frequently check all nuts, bolts and screws for tightness. Use only gen-
uine Hayter parts.
Damaged cutterblades and loose fixing bolts are major hazards. Before
use, visually inspect the cutting mechanism to ensure that it is in good
condition. A damaged cutterblade must be replaced immediately with
a genuine Hayter replacement part. Cutterblades which are slightly
worn can be resharpened. Ensure that both cutting edges are resharp-
ened equally to maintain balance.
An unbalanced cutterblade may cause serious damage to your
machine. Refer to "Maintenance."
Operation
SWITCH OFF AND REMOVE PLUG FROM MAINS.
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning, checking or working on the mower.
- Whenever you leave the mower.
- After striking a foreign object. Inspect the mower for damage
and make repairs before re-starting and operating the mower.
- If the mower starts to vibrate abnormally (check immediately).
- If the supply cable is entangled.
THE CUTTERBLADE CAN CONTINUE TO ROTATE AFTER
THE MACHINE IS SWITCHED OFF.
Keep the supply cable clear of the cutterblade at all times.
Do not mow across the supply cable. Immediately disconnect the cable
from the mains supply if this occurs and check for damage. Do not use
a defective supply cable.
Mow only in the daylight or in good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Operation
Use extreme caution when reversing or pulling the mower towards
you.
Switch off if the mower has to be tilted for transportation when cross-
ing surfaces other than grass and when transporting the mower to and
from the area to be mowed.
Never operate the mower unless the guards are securely in position and
in good condition.
Start the mower carefully, with feet well away from the cutterblade.
Do not tilt the front of the mower more than is absolutely necessary
when starting.
Never lift the rear of the mower.
Do not put hands or feet near or under rotating parts.
Never pick up or carry a mower while it is running or connected to the
mains supply.
Do not lift the rear deflector plate whilst the mower is in operation,
particularly when using without a grassbag.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the mower is in a
safe working condition.
Carefully examine the supply cable for signs of damage or ageing.
Replace immediately if defective.
Check the grassbag frequently for wear or deterioration and replace if
necessary.
Wear strong work gloves when removing and reassembling the cut-
terblade.
Replace worn or damage parts for safety.
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Safety Symbols
Danger of being hit by thrown
objects.
Safety Alert - Be aware to the
possibility of injury.
Danger of severing toes or fin-
gers in cutting mechanism.
Carefully read the Owners
Handbook before using the
machine.
Switch off and remove plug
from mains before performing
maintenance or repair work.
Keep bystanders at a safe dis-
tance from the mower.
Control Symbols
Switch
(Symbol)
Height of Cut Indicator
(Symbol)
Height of Cut Adjustment
(Symbol)
6
30513
CS284
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Owner’s Handbook.
2. Grassbag.
3. Supply Cable - (309C Only)
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the han-
dlebar to pivot. Unfold the handlebar to the operating position, before
releasing. Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged
at the pivot point.
Grassbag Attachment
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
Supply Cable
Unpack the supply cable and identify the female socket end which is
to be attached to the mower. Fold back the hinged protector cap and
plug into the handlebar switch control unit. The hinged cap should
snap into position behind the control unit when fully engaged.
Route the supply cable loosely across to the cable cleat on the left side
of the handlebar. Make a loop in the supply cable and secure to the
cable cleat.
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Electrical Connection
Position the mower on the grass area to be cut. Carefully uncoil the
supply cable clear of the mower and take the plug end connection to
the mains socket outlet. Ensure that the mains socket is switched
'OFF' before locating the RCCB unit - Refer to "Safety Precautions"
- Preparation. Switch 'ON' and check the operation of the RCCB unit.
Switch 'OFF' before installing the mower supply cable plug and final-
ly switch on.
Starting
Locate the switch control lever mounted on the handlebar and ensure
that your feet are clear of the mower deck. Depress the safety button
with the left hand and pull the lever towards the handlebar with the
right hand. The motor will now start. The safety button will remain
depressed until the lever is released.
Failure to depress the safety button before operating the lever
can cause permanent damage to the switch control unit.
Forward Travel
Hold and push against the handlebar with both hands to move the
mower forwards.
Turning
To make a wide turn steer the mower with the handlebar whilst trav-
elling forward.
To make a tight turn apply downward pressure on the handlebar to
raise the front wheels of the mower just above ground level and steer
the mower using the handlebar in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the motor is running.
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Stopping
Release the motor switch control lever to stop the motor.
WARNING: AVOID ACCIDENTS - The cutterblade may contin-
ue to rotate after the mower is switched off
Height of Cut
Hold the trigger against the handle and raise or lower the mower using
the handle to achieve the desired height of cut. Release the trigger to
secure the mower at the required position.
There are seven height of cut positions. The setting is indicated by the
position of the connecting rod relative to the height of cut indicator.
Always select a height of cut to suit operating conditions. Aim to pre-
vent motor overloading and blockages by avoiding low cuts in long
grass conditions. Be prepared to make two cuts when the grass is long.
Before Mowing
To prevent accidents thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety. Remember the location of these obstructions and
ensure that you mow around them.
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Grassbag
Raise the rear deflector and lift the grassbag through the handlebar
and lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting
grass clippings it is important that the grassbag is emptied
regularly to prevent blockages and motor overloading.
80V21C
Without Grass Collection
Remove the grassbag and operate the mower with the rear
deflector in the closed position.
Heavey Growth
Areas of heavy growth should be mown without collecting the
clippings. If collection is required, first mow the area without the
grassbag at the maximum height of cut setting. Allow the grass
clippings to dry out and then mow the area at the maximum height
of cut setting with the grassbag fitted. Reduce the height of cut and
mow the area again as necessary until the required finish is
obtained.
To prevent grass damage do not remove more than one third of
grass height in one cut.
Non-Grassed Areas
When moving the mower across non-grassed areas, stop the motor
and set the mower to the maximum height of cut to protect the
cutting mechanism.
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Safe Mower Practice
WARNING: PREVENT ACCIDENTS -Take extreme care do not
mow across the supply cable. If this should occur, switch off immedi-
ately and disconnect the plug from the power supply. Carefully exam-
ine the cable for cuts and damage. A defective cable must be replaced
before the mower is used again. Always be aware of the location of the
supply cable in relationship to the mower and the grass area. Do not
allow the cable to become hidden in uncut grass. Keep the cable over
the cut area at all times. A cable which is out of sight is out of mind
and this could lead to a hazardous situation. Plan a 'cutting scheme'
which works away from the power supply point and ensures that the
cable is trailed out over the cut area. Work up and down the lawn in
rows. Turn the machine round at the end of the row and step across the
cable so that the cable is trailed along in the cut area on the return run.
When working around flower beds, prevent the cable from trailing
across the cultivated area by positioning a stake at the corner of the
bed. Do not allow the cable to be pulled around sharp obstructions.
Stop mowing immediately if cable resistance is felt and remove the
obstruction. Do not allow the cable to become entangled.
WARNING: PREVENT ACCIDENTS - Switch off, remove plug
from mains before adjusting, cleaning or if the cable is entangled.
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Overloading Protection
Do not let the motor labour or slow down through being overloaded in
work. When this situation occurs, raise the front of the mower slightly
by bearing down on the handlebar, allow the motor to reach maximum
speed and proceed to mow at a slower pace. Alternatively readjust to a
higher cut position. If the motor continues to labour, switch off and
remove the plug from the mains supply. Remove and empty the grass-
bag. Examine the discharge chute and remove any blockage. Turn the
machine on its side and clear any obstruction from the cutterblade and
the underside of the mower deck. Place the machine upright and
replace the grassbag. Readjust to a higher cut position if necessary.
Restart the mower and proceed to mow at a pace which does not over-
load the mower.
IMPORTANT: PREVENT DAMAGE - DO NOT continue to
operate the motor in an overloaded condition. If this does occur,
stop mowing and allow the motor to run at maximum speed for
one minute. This will allow the motor to cool down to its normal
working temperature.
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
LAWN CARE CALENDAR
To be used as a guide only..
January
There is very little work to do this month apart from brushing away
leaves. Keep off the grass if frozen or waterlogged.
February
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil
organisms and root growth and apply lawn sand if necessary.
March
The yearly lawn work programme really starts this month. As soon as
the ground conditions are suitable, the first cut can be made. The first
cut should merely “top” the grass as close cutting at this stage could
result in severe yellowing or browning. Two cuts are generally suffi-
cient this month.
April
Mow often enough to stop grass growing away. Dig out patches of
coarse grass or resistant weed. Re-seed bare patches.
May
Keep mowing increasing the frequency as required. Treat with selec-
tive weed killers or combined weed/feed preparations if you did not
feed the lawn in April.
June
Summer mowing should now be under way. It should be necessary to
mow the lawn twice a week. Raking before mowing is important this
month as the combined action keeps runners of clover under control.
Water the grass if necessary, and remember to soak thoroughly.
July
Treat the grass with the second application of fertiliser or weed
killer/fertiliser. Water when necessary and rake occasionally. As a gen-
eral rule the grass clippings should be removed each time you mow. If
weather conditions are dry and hot and the grass is weed free, leave the
clippings on the lawn to help maintain ground moisture.
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
LAWN CARE CALENDAR
August
Keep mowing regularly and watering as necessary. Fill any cracks
caused by drought with a mixture of sharp sand and soil. In dry weath-
er conditions leave the grass longer to help retain ground moisture.
September
Raise the height of cut to allow the grass to thicken and protect the
roots from the winter frost and snow.
October
Rake out the thatch from the turf and spike the lawn to assist in
drainage. Brush in peat and sharp sand.
November
Use a stiff broom to disperse worm casts before mowing. Keep turf
free from leaves.
December
Apart from brushing away leaves, December is a slack end of a busy
year. Keep off the lawn if it is very wet or frozen.
Lawn Stripes
1
The way to achieve a neat striped effect is for the lawn being cut in
parallel stripes, alternate stripes being mown in opposite directions. A
much more important routine is to cut at right angles to the line of the
previous mowing. If the work has been carried in a north-south line,
then the next cutting should be in an east-west direction. The cross-
cutting keeps down the coarse weed grasses.
2
1CG480V05A
To prevent grass damage do not remove more than one third of the
grass height in one cut.
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE SCHEDULE
Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods
under dusty, dry conditions, or when airborne debris is present or after
extensive operation cutting tall, dry grass.
Daily
Remove grass debris from around the motor and air ways in the cowl
and underside of the deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check the condition of guards and safety devices.
Check condition of cutterblade.
25-50 Hrs or Every Season
Lubricate wheels, pivot points and linkages and grease the inner con-
trol cables at point of entry and exit from their outer casing.
Sharpen the cutterblade.
Flash test (Dealer) to ensure complete safety.
Check cables/switch and connection
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Deck Housing
Remove grass debris from the top and underside of the deck housing
immediately after use.
To prevent accidents fertilisers and top dressings are particularly
corrosive. Thoroughly clean the mower deck immediately after use
on treated grass and store well away from corrosive materials.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every
25 operating hours.
Motor
The motor is maintenance free.
Switch Control Unit
The switch control unit is maintenance free.
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Cutterblade Removal
Turn the mower on its side.
Firmly grip the end of the cutterblade with a gloved hand and remove
the bolt. The carrier may be removed from the shaft. This should be
cleaned and replaced. Ensure that the flats on the shaft locate correct-
ly with the flats on the carrier. Ensure that the new cutterblade is the
correct way up with the turned edges facing towards the motor before
locating onto the two carrier pins. Secure the cutterblade fixing bolt-
insulating and tighten to the specified torque of 27Nm.
The cutterblade has sharp edges. ALWAYS wear strong gloves to
protect your hands when working on the cutterblade. DO NOT
rotate tools towards the cutting edges to avoid the risk of injury
should the tool slip. ALWAYS use genuine Hayter replacement
parts.
The condition of the cutterblade and its mounting arrangement should
be checked regularly for signs of wear or damage. Ensure that the cut-
terblade is not bent or cracked.
A damaged cutterblade that is out of balance will vibrate excessively
and may break. DO NOT use an unbalanced cutterblade.
Regularly check that the bolt securing the cutterblade is tightened to
the specified torque of 27Nm.
Replace the cutterblade every 2 years of sooner if excessively worn or
damaged.
To prevent injury it is wise to seek assistance when turning the mower
on its side.
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Cutterblade Sharpening
A slightly worn cutterblade may be re-sharpened. Both blade edges
must be sharpened equally to ensure balance. Sharpen the cutterblade
every 25 mowing hours or more frequently if conditions require.
Remove the cutterblade from the mower and clean using a brush and
water. Inspect the cutterblade for signs of damage.Sharpen both cut-
ting edges with a flat file to restore performance.
30°-45°
Ensure that the cutterblade is balanced. Use a screw driver with a
round shaft to support the cutterblade through its centre hole. Hold the
cutterblade horizontal and then release. A balanced cutterblade will
remain horizontal.
1CG480V24B
If the cutterblade is not balanced the heavy end will rotate downwards.
Sharpen the heavy end until the cutterblade is correctly balanced.
1CG480V25B
Supply Cable
Check the condition of the supply cable for damage or ageing. Replace
immediately if defective.
1.21
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Storage
MOWER
Handlebar storage: To lower the handlebar unscrew the 2 securing
knobs sufficiently to allow it to be pivoted forwards to rest against the
mower. Take care to ensure that the power cable does not become
snagged at the pivot point.
Storage for long periods: To ensure your mower is maintained in
good working order it is important that the following procedure is
adopted when the mower is stored for periods in excess of one month.
Refer to the Maintenance section as necessary.
Clean all areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Lower the handlebar if desired.
Cover the mower with a protective sheet and store it in a dry area.
Rest the mower deck on wooden blocks to remove the weight of the
mower from its wheels / roller.
1.22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
REMEDY
Motor fails to start.
Mains supply socket dead.
RCCB tripped.
Test socket by plugging in
another appliance.
Remove mower plug and check
RCCB action. Check the supply
cable for any obvious signs of
damage and replace immediately
if defective. If no obvious faults
are found a serious fault is
indicated. Contact your Hayter
Dealer.
Plug pulled out of mains
socket.
Re-engage plug.
Fuse failure.
Fit a new 13 amp fuse.
Supply cable damaged.
Disconnect from the mains and
check the supply cable for any
obvious signs of damage. Replace
immediately if defective.
Cutterblade obstructed.
Disconnect from the mains and
remove any obstructions.
Cable socket pulled out of
switch control unit.
Re-engage cable socket.
Motor will not stop.
Faulty switch control unit.
Ensure switch lever has returned
to the 'OFF' position. Disconnect
from the mains and contact your
Hayter Dealer.
Cutterblade runs on
excessively after switching
'OFF'.
Faulty brake unit.
Contact your Hayter Dealer.
1.23
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING
TROUBLE
PROBLEM
POSSIBLE FAULT
Mounting bolts loose.
Cutterblade bolt loose.
Cutterblade out of balance.
Undulating ground contours.
Cutterblade worn.
REMEDY
Motor vibrates excessively.
Tighten bolts.
Tighten bolt.
Balance cutterblade.
Change direction of travel.
Sharpen the cutterblade.
Balance cutterblade.
Inspect and replace as necessary.
Mow dry grass.
Uneven cut
Cutterblade out of balance.
Wheels / Roller damaged.
Grass is wet.
Discharge chute blocks.
Cut height too low.
Increase cut height.
Empty grassbag.
Grassbag full.
No airflow through the
grassbag.
Clean the grassbag.
Mower is hard to push.
Poor grass collection.
Cut height too low.
Increase cut height.
Wheels / Roller damaged.
Inspect and lubricate or replace as
necessary.
No airflow through the
grassbag.
Clean the grassbag.
Discharge chute blocked.
Wet grass.
Remove blockage.
Mow dry grass.
Empty grassbag.
Grassbag full.
1.24
Download from Www.Somanuals.com. All Manuals Search And Download.
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND
declare that the lawnmowers:
Models:
Harrier 41
CODE 309C
Push Electric
Pedestrian Rotary Pedestrian Rotary
ATB Austria 1.5kw ATB Austria 1.5kw
2950 rpm
410mm
2950 rpm
Harrier 41
CODE 311C
Push Electric
Machine Type No.
Category:
Type:
Motor: Manufacturer:
Speed of rotation:
Width of cutting device:
Speed of rotation of the cutting device:
2950 rpm
410mm
2950 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components, as amended and the regulations transposed into
national law.
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations transposed into
national law.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors, and the regu-
lations transposed into national law procedure applied for the conformity assessment: ANNEX VI, procedure
1. Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk, ENGLAND
Notified body identification No: 1088
Measured sound power level:
Guaranteed sound power level:
91 dB(A)
96 dB(A)
91 dB(A)
96 dB(A)
Standards Used: EN2921, EN836 and EN55014, EN61000-3-2, EN61000-3-3
Signed
Date: 28.09.04
Declaration done and Technical Documentation kept at:
HAYTER LIMITED,
S.A. Maryniak
(Technical Director)
Spellbrook, Bishop’s Stortford,
Herts CM23 4BU ENGLAND
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on
the handlebars. CODE 309C = 1.1 ms-2.. CODE 311C = 1.1 ms-2.
.
1.25
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
DESCRIPTION
ITEM NO.
PART NO.
ITEM NOTE
QTY.
309 311
1
2
3
4
5
6
7
8
Deck
305101V
305112
09596
300067
300066
09575
305115
305111
305110
09569
300070
09472
300124
300137
09544
219037
09634
02385
308050W
09271
09216
305130
09365
201007
219143
4486
305016
09546
305108
300111
305109
234019
234018
308021
410087
305113
331045
234020
09442
1
1
6
1
1
3
2
1
1
2
1
6
1
1
1
3
2
2
1
2
1
1
2
2
2
2
2
4
2
1
1
1
1
1
1
1
1
1
5
5
1
1
6
1
1
3
2
1
1
2
1
6
1
1
1
3
2
2
1
2
1
1
2
2
2
2
2
4
2
1
1
1
1
1
1
1
1
1
5
5
Handle Height Adjuster
Screw - M6 x 16
Spring - Trigger
Trigger
Screw - M6 x 20 Taptite
Ferrule - Plastic Dia. 8
Spring - Deflector R/H
Spring - Deflector L/H
Coachbolt - M8 x 45
Compensating Spring
Washer - Plain M6
Throwplate
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Pillar
Nut - M6 Nylon Ins 'T' Type
Plate - Securing
Screw - 6 x 16 Pozidrive
Grip-Fix
Rear Roller Frame
Washer - 3/8" Plain
Nut - 3/8” UNF
Axle Support
Screw - M6 x 16 Hex W/Hd
Roller - Black
Hub Cap
Nut - Wheel Nyloc
6” Wheel
Screw - M6 x 12
Axle Bush
Axle - Front Assembly
Rod - Connecting
Cutterblade
Carrier
Axle Bolt
Decal - Hayter / Royal Warrant
Decal - Height of Cut
Decal - Hand and Foot
Fixing Bolt - Nylon
Nut - M8 Nylon Ins. ‘P’
Washer - M8
09475
1.26
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
ITEM NO.
DECRIPTION
PART NO. QTY.
309 311
ITEM NO
41
42
43
44
45
46
47
48
49
50
51
52
53
54
Base Plate Motor
Motor Flange
309019
309024
09681
1
1
3
1
1
4
1
1
4
1
1
1
2
1
0
1
1
2
2
2
3
1
0
2
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
4
1
1
4
1
1
1
2
0
1
1
1
2
2
2
3
0
1
2
0
1
1
1
1
1
1
1
1
1
1
Bolt - M8 x 40 Hex. Hd
Motor Screen
Capacitor
309025
309039
09670
Screw - No. 14 x 1.1/4” Self Tap
Motor - 1.5 kw
309052
309046
09669
Motor Cover Mk2
Screw - No. 14 x 1.1/2” Self Tap
Cable Clip
70-09-109
309020
309040
09528
Motor Cover Top
Decal - Harrier 41 Electric
Screw - No.8 x 1” Plastite
Decal - Warning
Decal - Warning
Handlebar - Lower RH
Handlebar - Lower LH
Plug - Tube
309028
311012
309033
309034
320048
226013
226024
3966
55
56
57
58
59
60
61
Inc. Insulator
Inc. Insulator
Handwheel
Bolt - M8 x 45 Handlebar
Cable Tie
Switch
309026
311010
09719
Switch
62
63
64
65
66
67
68
69
70
71
72
73
Screw - Ejot KA40 x 25
Coupler Cable Assembly
Hose Clip - Black
Cleat
309027
234029
234014
305105W
305104
305118
309036
305102
N/A
Frame - Grassbag
Fabric - Grassbag
Grassbag Assembly
Handlebar - Upper
Deflector
Inc. items 25 & 32
Decal - Serial Number
Pin - 6.35 x 295
Decal - Grass Blade
305103
410064
1.27
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
65
61
62
62
63
60
64
60
60
69
59
68
66
67
70
8
6
3
6
7
71
2
74
3
1
4
72
5
10
35
9
11
6
36
13
12
37
14
3
34
12
25
12
26
12
16
3
33
32
17
15
19
20
18
21
22
12
27
3
31
24
29
16
30
18
28
29
16
38
23
23
26
25
28
27
1C309L03A
1.28
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Notes:-
1.29
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Notes:-
1.30
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Notes:-
1.31
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION
CUSTOMER
Serial No:
Motor Type:-ATB Austria 1.5kw
Motor Type:-ATB Austria 1.5kw
Code 309C
Code 311C
Date of Sale:-
Your Local Dealer:-
1.32
Download from Www.Somanuals.com. All Manuals Search And Download.
|