Hawk
CODES
308A
(Push)
312A
(Auto Drive)
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 308A001001, 312A001001
ISSUE 21.04.04
HANDBOOK: 308068 (REV .1.)
Download from Www.Somanuals.com. All Manuals Search And Download.
1ST Year (12 months)
1ST Year (12 months)
Owner s Name:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Serial Number:
Date:
Date:
Note for dealer: Please retain this voucher for your records.
2nd Year (24 months)
2nd Year (24 months)
Owner s Name:
Serial Number:
We certify that this service has been
carried out by an Authorised Hayter
Service Dealer
Date:
Date:
Note for dealer: Please retain this voucher for your records.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1.2 Main Features/Specifications
1.5 Contents
1.22
1.22
1.23
1.23
1.23
1.24
1.24
1.24
1.25
1.25
1.26
1.26
1.27
- Oil Service
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Grassbag
1.6 Introduction
- Deck Housing
1.7 Warranty
- Securing Nuts and Bolts
- Clutch Cable Adjustment
- Lubrication
- Cutterblade Removal
- Cutterblade Assembly
- Cutterblade Sharpening
- Storage
1.8 - 1.11 Safety Precautions
1.11 Safety Symbols
1.11 Decal Symbols
1.12 Assembling the Mower
1.12
1.12
1.12
- Delivery Checklist
- Handlebar
- Grassbag Attachment
1.28 - 1.29 Trouble Shooting
1.30 Declaration of Conformity
1.31 - 1.33 Parts List
1.13 Before Starting the Mower
1.13
1.13
1.13
1.13
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.34 Parts list Diagram
1.14 - 1.17 Operating The Mower
1.35 Customer Info/Notes
1.14
1.14
1.14
- Controls
- Starting Step 1
Step 2
1.15
1.15
- Forward Travel
- Turning
1.15
- Stopping
1.16
- Slopes
1.16
1.16
1.16
- Height of Cut
- Before Mowing
- Grassbag
1.17
1.17
1.17
1.17
- Without Grass Collection
- Heavy Growth
- Friction Device
- Non-Grassed Areas
- Lawn Care Calendar - Guide Only
- Lawn Stripes
1.18 - 1.19
1.18
1.20 Maintenance Schedule
1.21 - 1.27 Mower Maintenance
1.21 - Engine
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your mower.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of
liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notification.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.6
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturer of major proprietry components ie. engines, gearbox /
transaxle (where applicable) furnish their own warranty and services are provided through their
authorised network. To qualify for the full benefit of the warranty, the warranty registration card
must be returned within 14 days of purchase. Subject to the conditions and exclusions noted in
this limited warranty, we shall at our option, repair or replace any warranted part during the
applicable period. If you are in doubt or experience any difficulty, please consult a Hayter
Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, sweeper/brushes, batteries and
other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake clutch (B.B.C) units and other such devices are not
applicable. Only machines fitted with a genuine Hayter friction disc, which are used in
accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages and
Download from Www.Somanuals.com. All Manuals Search And Download.
1.7
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the mower read the owners handbook carefully. Pay par-
ticular attention to the safety precautions. Ensure that you are familiar
with the controls and the proper use of the equipment. Learn how to
stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove
all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Add fuel before starting the engine. Never remove the cap from the
fuel tank or add petrol while the engine is running or when the engine
is hot. Allow the engine to cool for at least two minutes before refu-
elling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the mower away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.8
SAFETY PRECAUTIONS
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutterblade or loose fixing bolt are major hazards. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. A damaged cutterblade must be replaced immedi-
ately with a genuine Hayter replacement part
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes of more than 20 degrees.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine before moving the mower across areas other than grass.
Never operate the mower unless the guards are securely in position and
in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine.
Start the engine carefully, with feet well away from the cutterblade.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.9
SAFETY PRECAUTIONS
Operation
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the mower while the engine is running.
Never lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and
ensure necessary repairs are made before re-starting.
- If the mower starts to vibrate abnormally (check immediately).
Stop the engine:
- Whenever you leave the mower.
- Before refuelling.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the mower with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.10
SAFETY PRECAUTIONS
Maintenance & Storage
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cut-
terblade.
Always replace worn or faulty parts with genuine Hayter parts.
Safety Symbols
Danger of being hit by thrown
objects.
Safety Alert - Be aware to the
possibility of injury.
Danger of severing toes or fin-
gers in cutting mechanism.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove spark
plug lead before working on
the mower.
Keep bystanders at a safe dis-
tance from the mower.
Decal Symbols
Height of Cut Indicator
(Symbol)
Engine Stop
(Symbol)
Height of Cut Adjustment
(Symbol)
6
STOP
305113
Download from Www.Somanuals.com. All Manuals Search And Download.
1.11
ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Hold the engine stop lever in towards the handlebar and
unfold the handlebar to the operating position, before releasing. Tighten
both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Grassbag Attachment
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
Download from Www.Somanuals.com. All Manuals Search And Download.
1.12
STARTING THE MOWER
BEFORE
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Oil Type
Always use high quality detergent oil classified SAE 30 oil. Never use
additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Check Oil Level
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
CS130
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
Fuel Type
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton ser-
vice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.13
OPERATING THE MOWER
Controls
Operate all control levers several times and ensure that the cables
move freely. Check that the engine stop and ground drive clutch levers
return freely to their rest position when released.
Starting - Step 1
Operate the primer bulb: Note: Push on the primer bulb 5 times at
two second intervals to provide the extra fuel to start the engine after
assembling the mower for the first time.
CS117
In normal use push on the primer bulb 3 times at 2 second intervals to
provide the extra fuel required to start a cold engine. Operation of the
primer bulb is usually unnecessary when starting a warm engine.
1
Step 2
Stand behind the mower and hold the handlebar together with the
engine stop lever with your left hand. With your right hand hold the
engine start - grip and pull slowly until resistance is felt, then pull
rapidly to crank the engine. Carefully return the start grip to the stor-
age position when the engine starts.
If the engine does not start after 5 attempts - refer to “Trouble
Shooting”.
The engine stop lever must be held firmly against the handlebar to
start and keep the engine running. If the engine stop lever is
released the engine will stop.
To prevent damage never pull the engine start grip when the
engine is running.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.14
OPERATING THE MOWER
Forward Travel
(Autodrive Only)
Hold the handlebar and operate the ground drive clutch lever to power
the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be
pushed. This feature is useful when mowing in confined areas.
If the engine stop lever is released the engine will stop.
Turning
To make a wide turn steer the mower with the handlebar in the direc-
tion required.
To make a tight turn release the ground drive clutch lever, apply down-
ward pressure on the handlebar to raise the front wheels just above
ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Stopping
Release the ground drive clutch lever and the engine stop lever.
Emergency stop: Release both ground drive clutch lever and engine
stop lever together.
If the engine fails to stop, move the throttle lever to the ‘slow’ posi-
tion and disconnect the spark plug lead.
STOP
Download from Www.Somanuals.com. All Manuals Search And Download.
1.15
OPERATING THE MOWER
Slopes
To prevent engine damage do not use the mower on slopes greater
than 20 degrees.
Height of Cut
Hold the trigger against the handle and raise or lower the mower using
the handle to achieve the desired height of cut. Release the trigger to
secure the mower at the required position.
There are seven height of cut positions. The setting is indicated by the
position of the connecting rod relative to the height of cut indicator.
Always select a height of cut to suit operating conditions. Aim to pre-
vent engine overloading and blockages by avoiding low cuts in long
grass conditions. Be prepared to make two cuts when the grass is long.
30513
Before Mowing
To prevent accidents thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety. Remember the location of these obstructions and
ensure that you mow around them.
Grassbag
Raise the rear deflector and lift the grassbag through the handlebar and
lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting grass
clippings it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.16
OPERATING THE MOWER
Without Grass Collection
Remove the grassbag and operate the mower with the rear deflector in
the closed position.
Heavy Growth
Areas of heavy growth should be mown without collecting the clip-
pings. If collection is required, first mow the area without the grass-
bag at the maximum height of cut setting. Allow the grass clippings to
dry out and then mow the area at the maximum height of cut setting
with the grassbag fitted. Reduce the height of cut and mow the area
again as necessary until the required finish is obtained.
30513
To prevent grass damage do not remove more than one third of grass
height in one cut.
Friction Device
The cutterblade is driven by the engine via a friction device to help
prevent damage occurring to the cutting mechanism when a hidden
obstruction or overload is encountered. When the obstruction or over-
load situation is removed the friction device will automatically reset.
CS125
Always stop the engine when a hidden obstruction or excessive vibra-
tion is encountered. Disconnect the spark plug lead and examine the
cutting mechanism. ALWAYS replace a damaged cutterblade - refer to
“Maintenance”.
Non-Grassed Areas
When moving the mower across non-grassed areas, stop the engine
and set the mower to the maximum height of cut to protect the cutting
mechanism.
STOP
Download from Www.Somanuals.com. All Manuals Search And Download.
1.17
LAWN CARE CALENDAR
To be used as a guide only.
January
There is very little work to do this month apart from brushing away
leaves. Keep off the grass if frozen or waterlogged.
February
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil
organisms and root growth and apply lawn sand if necessary.
March
The yearly lawn work programme really starts this month. As soon as
the ground conditions are suitable, the first cut can be made. The first
cut should merely “top” the grass as close cutting at this stage could
result in severe yellowing or browning. Two cuts are generally suffi-
cient this month.
April
Mow often enough to stop grass growing away. Dig out patches of
coarse grass or resistant weed. Re-seed bare patches.
May
Keep mowing increasing the frequency as required. Treat with selec-
tive weed killers or combined weed/feed preparations if you did not
feed the lawn in April.
June
Summer mowing should now be under way. It should be necessary to
mow the lawn twice a week. Raking before mowing is important this
month as the combined action keeps runners of clover under control.
Water the grass if necessary, and remember to soak thoroughly.
July
Treat the grass with the second application of fertiliser or weed
killer/fertiliser. Water when necessary and rake occasionally. As a gen-
eral rule the grass clippings should be removed each time you mow. If
weather conditions are dry and hot and the grass is weed free, leave the
clippings on the lawn to help maintain ground moisture.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.18
LAWN CARE CALENDAR
August
Keep mowing regularly and watering as necessary. Fill any cracks
caused by drought with a mixture of sharp sand and soil. In dry weath-
er conditions leave the grass longer to help retain ground moisture.
September
Raise the height of cut to allow the grass to thicken and protect the
roots from the winter frost and snow.
October
Rake out the thatch from the turf and spike the lawn to assist in
drainage. Brush in peat and sharp sand.
November
Use a stiff broom to disperse worm casts before mowing. Keep turf
free from leaves.
December
Apart from brushing away leaves, December is a slack end of a busy
year. Keep off the lawn if it is very wet or frozen.
Lawn Stripes
1
The way to achieve a neat striped effect is for the lawn being cut in
parallel stripes, alternate stripes being mown in opposite directions. A
much more important routine is to cut at right angles to the line of the
previous mowing. If the work has been carried in a north-south line,
then the next cutting should be in an east-west direction. The cross-
cutting keeps down the coarse weed grasses.
2
1CG480V05A
To prevent grass damage do not remove more than one third of the
grass height in one cut.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.19
MAINTENANCE SCHEDULE
To prevent accidents stop the engine disconnect the spark plug lead
before attempting to carry out maintenance procedures on the mower.
Follow the hourly or calendar intervals, whichever occurs first. More fre-
quent service will be required if working for prolonged periods under
dusty, dry conditions, or when airborne debris is present or after extensive
operation cutting tall, dry grass.
First 5Hrs
After the very first five hours change the engine oil
Daily
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard and air
ways in the top cowl and underside of the deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check the condition of guards and safety devices.
Check condition of cutterblade.
25Hrs or Every Season
Change the engine oil if continuously operating under heavy load or high
ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner control
cables at point of entry and exit from their outer casing.
Check the clutch cable adjustment.
Sharpen the cutterblade.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.20
MOWER MAINTENANCE
50Hrs or Every Season
Change the engine oil.
100Hrs or Every Season
Clean the engine cooling system. Clean more often under dusty con-
ditions or when airborne debris is present or after prolonged opera-
tion whilst cutting tall, dry grass.
Replace the spark plug.
Engine
5
4
1. Engine
3
2. Primer Bulb
2
6
3. Air Cleaner
4. Fuel filler Cap
5. Start Grip
6. Oil filler Cap/ Dipstick
1
7. Exhaust Guard
8. Spark plug
7
8
1CG308/312A02B
Download from Www.Somanuals.com. All Manuals Search And Download.
1.21
MAINTENANCE
Oil Service
MOWER
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the mower over on to its left hand side thus ensuring that
the air cleaner is kept uppermost to prevent engine damage.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
Air Cleaner Service
1
2
3
To service the air cleaner, remove screw (1) and remove cover (2).
Carefully remove foam element (3) and wash in a solution of liquid
detergent and water. Allow to air dry thoroughly before fitting or wrap
in a cloth and squeeze dry. If very dirty, replace.
4
Saturate with clean engine oil and squeeze out excess.
After servicing, re-assemble the air cleaner and fasten securely.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.22
MOWER MAINTENANCE
Spark Plug Service
Use only Briggs & Stratton spark tester (1) to check for a spark as
shown in the diagram.
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Briggs & Stratton service dealer.
1
Check the spark plug gap with a feeler gauge and set at 0.76mm.
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommended that this service be carried out by an
authorised Briggs and Stratton dealer.
Grassbag
Remove grass debris from the grassbag immediately after use and
check its condition for signs of damage.
To prevent accidents replace a damaged grassbag immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.23
MAINTENANCE
Deck Housing
MOWER
Remove grass debris from the top and underside of the deck housing
immediately after use.
To prevent accidents fertilisers and top dressings are particularly
corrosive. Thoroughly clean the mower deck immediately after use
on treated grass and store well away from corrosive materials.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Clutch Cable Adjustment
32-38mm
Auto Drive Model Only.
Check the clutch cable operation every 25 operating hours and adjust
if necessary. The clutch cable is adjusted correctly when the belt drive
just engages with the clutch lever positioned 32-38mm from the han-
dlebar.
Unscrew the lock nuts (1) and screw the adjuster (2) in or out as nec-
essary. Tighten the locknuts (1) when correctly adjusted.
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1.24
MOWER MAINTENANCE
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every 25
operating hours.
Apply a good quality medium grease to the inner control cables at the
point of entry and exit from their outer casing.
Cutterblade Removal
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its Right hand side and ensure that the
exhaust side of the engine is uppermost.
Firmly grip the end of the cutterblade with the gloved hand and remove
the bolt, spring washer and distance piece securing the cutterblade with
a 9/16” A/F spanner.
CS081
To prevent accidents never work on the cutterblade unless the
spark plug lead has been removed. The cutterblade has sharp
edges. ALWAYS wear strong gloves to protect your hands when
working on the cutterblade. DO NOT rotate tools towards the cut-
ting edges to avoid the risk of injury should the tool slip. ALWAYS
use genuine Hayter replacement parts.
The condition of the cutterblade and its mounting arrangement should
be checked regularly for signs of wear or damage. Ensure that the cut-
terblade is not bent or cracked.
A damaged cutterblade that is out of balance will vibrate excessively
and may break. DO NOT use an unbalanced cutterblade.
Regularly check that the bolt securing the cutterblade is tightened to the
specified torque of 54Nm.
Replace the cutterblade every 2 years of sooner if excessively worn or
damaged.
To prevent injury it is wise to seek assistance when turning the mower
on its side.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.25
MAINTENANCE
MOWER
Cutterblade Assembly
Assemble the cutterblade with the turned up edges facing towards the
engine. Secure the cutterblade using the bolt, spring washer, and dis-
tance piece and tighten to a torque of 54Nm.
CS094
Cutterblade Sharpening
30°-45°
A slightly worn cutterblade may be re-sharpened. Both blade edges
must be sharpened equally to ensure balance. Sharpen the cutterblade
every 25 mowing hours or more frequently if conditions require.
Remove the cutterblade from the mower and clean using a brush and
water. Inspect the cutterblade for signs of damage.Sharpen both cut-
ting edges with a flat file to restore performance.
Ensure that the cutterblade is balanced. Use a screw driver with a
round shaft to support the cutterblade through its centre hole. Hold the
cutterblade horizontal and then release. A balanced cutterblade will
remain horizontal.
If the cutterblade is not balanced the heavy end will rotate downwards.
Sharpen the heavy end until the cutterblade is correctly balanced.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.26
MOWER MAINTENANCE
Storage
To store the handlebar unscrew the 2 small securing knobs sufficient-
ly to allow it to be pivoted forwards to rest against the mower. Take
care to ensure that the control cables do not become snagged at the
pivot point and depress the engine stop lever to prevent it being dam-
aged through contact with the engine spark plug.
Engines stored in excess of 30 days need to be protected with Briggs &
Stratton fuel additive or drained of fuel to prevent gum from forming in
the fuel system or on essential carburettor parts. To ensure your mower
is maintained in good working order it is important that the following
procedure is adopted. Refer to the Maintenance section as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Clean all other areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.27
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
Engine stop lever released.
Incorrect oil level.
REMEDY
Engine will not turn over
Operate engine stop lever.
Check oil level.
Obstruction under deck.
Remove obstruction.
Engine smokes
Excess oil level.
Check oil level.
Air cleaner cartridge oil
soaked or blocked.
Service air cleaner.
Engine runs then stops
Engine will not start
Fuel starvation.
Fill fuel tank.
Fuel cap vent blocked.
Clean fuel cap vent.
Engine under load.
Raise height of cut.
Fill fuel tank.
Fuel starvation.
Incorrect/contaminated fuel.
Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected.
Throttle setting incorrect.
Engine brake not released.
Faulty spark plug.
Connect spark plug lead.
Set throttle to ‘fast’ position.
Operate engine brake lever.
Clean and adjust gap or replace.
Check wiring.
Wiring fault.
Engine runs rough
Spark plug lead becoming
disconnected in use.
Connect spark plug lead.
Faulty spark plug.
Clean and adjust gap or replace.
Service air cleaner.
Air cleaner blocked.
Incorrect/contaminated fuel.
Drain tank and fill with correct fuel.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.28
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
REMEDY
Engine vibrates excessively
Mounting bolts loose.
Cutterblade bolt loose.
Cutterblade out of balance.
Bent crankshaft.
Tighten bolts
Tighten bolt
Balance cutterblade
Consult your dealer
Uneven cut
Undulating ground conditions
Cutterblade worn
Change direction of travel
Sharpen the cutterblade
Cutterblade out of balance
Wheels / roller damaged
Balance the cutterblade
Inspect and replace as necessary
Discharge chute blocks
Grass is wet
Mow dry grass
Cut height too low
Grassbag full
Increase cut height
Empty grassbag
Clean the grassbag
Airflow through the
grassbag is restricted
Mower is hard to push
Cut height too low
Increase cut height
Wheels / roller damaged
Inspect and replace as necessary
Mower will not self propel
(Autodrive Only)
Clutch out of adjustment
Drive belt damaged
Adjust clutch cable
Replace drive belt
Poor grass collection
Airflow through the
grassbag is restricted
Clean the grassbag
Discharge chute blocked
Wet grass
Remove blockage
Mow dry grass
Grassbag full
Empty grassbag
Engine speed too slow
Set throttle to fast position
Download from Www.Somanuals.com. All Manuals Search And Download.
1.29
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND
declare that the lawnmowers:
Models:
Hawk
Hawk
Machine Type No.
Category:
Type:
Engine - Manufacturer:
Speed of rotation:
Width of cutting device:
CODE 308A
Push
Pedestrian Rotary
Briggs & Stratton
2900 rpm
CODE 312A
Auto Drive
Pedestrian Rotary
Briggs & Stratton
2900 rpm
410mm
410mm
Speed of rotation of the cutting device: 2900 rpm
2900 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components, as amended and the regulations transposed into
national law.
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations transposed into
national law.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors, and the regula-
tions transposed into national law procedure applied for the conformity assessment: ANNEX VI, procedure 1.
Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk, ENGLAND
Notified body identification No: 1088
Measured sound power level:
Guaranteed sound power level:
94 dB(A)
96 dB(A)
94 dB(A)
96 dB(A)
Standards Used: EN292, EN836 and ENISO14982
Signed
Date: 15.4.2004
Declaration done and Technical Documentation kept at:
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford,
M.A. Wright
(Technical Director)
Herts CM23 4BU ENGLAND
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the
handlebars. CODE 308A = 7.8 ms-2.. CODE 312A = 7.8 ms-2..
Download from Www.Somanuals.com. All Manuals Search And Download.
1.30
PARTS LIST
QTY.
DESCRIPTION
ITEM NO.
PART NO.
308A 312A
ITEM NOTE
1
2
3
Deck
Key
305101V
1662
312004
308054
306120
306123
1
1
0
1
0
0
6
1
1
3
1
1
1
1
0
1
1
1
1
6
1
2
2
0
1
2
0
0
0
2
1
1
0
1
0
0
2
0
1
1
1
0
1
1
6
1
1
3
1
1
1
1
1
1
1
1
1
7
1
2
0
1
1
2
1
1
4
2
1
1
1
1
1
1
3
2
Engine - Compliance
Engine - Compliance
Bracket - Scraper
Pulley
Screw - Pan. Pozi Taptite M6 x 16 09596
Height Adjuster Handle
Decal - Engine
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
305112
6298
Screw - UNC Taptite 3/8" x 1.1/4" 09349
Decal - Height of Cut
Decal - Grass Blade
Decal - Hayter / Royal Warrant
Decal - Serial No.
Spring
Trigger
Trigger Spring
Axle Bolt
Compensating Spring
Washer - M6 Plain
Pillar
Nut - M6 Nylon Ins 'T' Type
Rear Roller
305113
410064
410087
-
301031
300066
300067
308021
300070
09472
300137
09544
201007
239065
300124
305108
306050
306102
09706
Rear Roller
Throwplate
Axle Bush
Belt - V
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Driven Pulley
Screw - No 10 x 3/4"
Ferrule
Washer - 3/8" Plain (Axle Spacers) 09271
Nut - 3/8" UNF Nylon Ins. 'T' Type 09216
Nut - M4 Nyloc Ins ‘T’ Type
Axle Support
Compensating Pulley
Compensating Plate
Grip-Fix
305115
As required
09657
305130
301020
301050
02385
Grip-Fix
04020
Download from Www.Somanuals.com. All Manuals Search And Download.
1.31
PARTS LIST
QTY.
DESCRIPTION
ITEM NO.
PART NO.
308A 312A
ITEM NOTE
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Bearing Half
301030
301015
239021
09634
MU42734
302026
MU17x137
219037
09658
0
0
0
2
1
1
1
3
1
1
1
4
2
2
2
1
0
1
0
0
1
1
2
6
2
2
0
0
1
0
?
1
1
1
2
1
1
1
3
1
1
1
5
2
2
2
1
1
0
1
1
1
1
2
2
3
2
1
1
1
1
?
Jockey Arm Assembly
Pulley - Tensioner
Screw - 6 x 16 Pozidrive
Adapter
Cutterbar
Washer
Plate - Securing
Washer - M4
Bolt - Hex Hd 3/8" x 1.1/2" UNF 09118
Rod - Connecting
Screw - Hex W/Hd M6 x 12
Hub Cap
Nut - Wheel 1/2" Nyloc
Wheel - 6"
305109
09546
219143
4486
302016
300111
306115W
308050W
03997
306094W
305091W
340179
340182
09688
inc. item 92
Axle - Front Assembly
Rear Roller Frame
Rear Roller Frame
Roll Pin
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Clutch Lever
Handlebar - Upper
Lever - Engine Stop
Pivot Pin
Washer - Nylon
Screw - 6mm x 20
Drive Fastener
Cable - Clutch
Bracket - Clutch Cable
Rope Guide
Cable - Engine Break
Screw - M5x35
Screw - M4x35
Cable Tie
Rope Guide
Tube Plug
09687
300144
306107
306108
305127
312002
09358
09704
3966
0
3
1
2
2
2
2
2
2
1
1
3
1
2
2
2
2
2
2
1
305093
300160
226024
226013
234051
09441
Bolt - Saddle Hd M8 x 45
Knob
Nut - Cap M8
Nut - Nylon Ins. 'T' Type M8
Handlebar - Lower
Deflector
300062
305102
Download from Www.Somanuals.com. All Manuals Search And Download.
1.32
PARTS LIST
QTY.
DESCRIPTION
ITEM NO.
PART NO.
308A 312A
ITEM NOTE
77
78
79
80
81
82
83
84
85
86
87
Decal - Caution
219189
09575
1
3
1
1
1
1
1
2
1
1
2
1
3
1
1
1
1
1
2
1
1
2
Screw - Hex W/Hd M6 x 20
Spring - Deflector R/H
Rod - Deflector
Spring - Deflector L/H
Grassbag
Frame - Grassbag
Screw - Hex W/Hd M6 x 16
Sealing Strip
305111
305103
305110
305104
305105W
09365
305119
305118
09379
Grassbag - Complete Assembly
Bolt - Coach M8x40
Download from Www.Somanuals.com. All Manuals Search And Download.
1.33
PARTS LIST
59
57
56
59
55
60
60
58
58
66
69
61
61
63
19
21
67
62
72
68
70
64
45
31
86
82
70
71
83
75
72
73
68
74
73
74
3
68
75
65
76
11
77
78
6
2
78
79
28
8
6
1
7
13
80
85
16
15
87
9
12
81
10
18
78
37
19
20
34
33
35
6
17
23
19
49
50
44
41
40
21
53
42
29
35
30
32
19
51
6
19
47
22
43
35
24
25
48
60
54
44
48
52
5
46
84
26
36
24
44
27
4
50
49
48
51
38
14
2D308A/312A/01A
Download from Www.Somanuals.com. All Manuals Search And Download.
1.34
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER INFORMATION /NOTES
Serial No:
Engine Type:- 10D902-0155-B1 (308A)
Engine Type:- 10D982-0164-B1 (312A)
Engine:- Briggs & Stratton Sprint 40
Engine:- Briggs & Stratton Sprint 40
Date of Sale:-
Your Local Dealer:-
Notes:-
Download from Www.Somanuals.com. All Manuals Search And Download.
1.36
|