Operator’s Manual
Triple Bagger Kit
Model 190-190-100
Model 190-192-190
IMPORTANT: Read safety rules and instructions carefully
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered,
brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the
above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply
on federal lands. A spark arrester for the muffler is available through your Cub Cadet dealer or contact the service department, P.O. Box
361131 Cleveland, Ohio 44136-0019.
Cub Cadet LLC., P.O. Box 361131, Cleveland, OH 44136-0019
769-01136
(4/2004)
FORM NO.
PRINTED IN U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES
WARNING: This symbol points out important safety instructions which, if not followed, could endanger
the personal safety and/or property of yourself and others. Read and follow all instructions in this manual
before attempting to operate this machine. Failure to comply with these instructions may result in personal
injury. When you see this symbol—heed its warning.
WARNING: The Battery and Engine Exhaust contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. The battery and posts contain lead;
wash hands after handling.
WARNING: This machine was built to be operated according to the rules for safe operation in this
manual. As with any type of power equipment, carelessness or error on the part of the operator can result in
serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to
observe the following safety instructions could result in serious injury or death.
11. A missing or damaged discharge cover can cause blade
contact or thrown object injuries.
12. Stop the blade(s) when crossing gravel drives, walks, or
roads and while not cutting grass.
13. Watch for traffic when operating near or crossing
General Operation
1. Read, understand, and follow all instructions on the
machine and in the manual(s) before attempting to
assemble and operate. Keep this manual in a safe place
for future and regular reference and for ordering
roadways. This machine is not intended for use on any
replacement parts.
public roadway.
2. Be familiar with all controls and their proper operation.
14. Do not operate the machine while under the influence of
Know how to stop the machine and disengage them
alcohol or drugs.
quickly.
15. Mow only in daylight or good artificial light.
16. Never carry passengers.
17. Disengage blade(s) before shifting into reverse. Back up
3. Never allow children under 14 years old to operate this
machine. Children 14 years old and over should read and
understand the operation instructions and safety rules in
slowly. Always look down and behind before and while
this manual and should be trained and supervised by a
backing to avoid a back-over accident.
parent. Never allow adults to operate this machine
without proper instruction.
18. Slow down before turning. Operate the machine
smoothly. Avoid erratic operation and excessive speed.
4. To help avoid blade contact or a thrown object injury,
19. Disengage blade(s), set parking brake, stop engine and
keep bystanders, helpers, children and pets at least 75
wait until the blade(s) come to a complete stop before
feet from the machine while it is in operation. Stop
removing grass catcher, emptying grass, unclogging
machine if anyone enters the area.
5. Thoroughly inspect the area where the equipment is to be
chute, removing any grass or debris, or making any
adjustments.
used. Remove all stones, sticks, wire, bones, toys, and
other foreign objects which could be picked up and
20. Never leave a running machine unattended. Always turn
off blade(s), place transmission in neutral, set parking
thrown by the blade(s). Thrown objects can cause
brake, stop engine and remove key before dismounting.
serious personal injury.
21. Use extra care when loading or unloading the machine
6. Plan your mowing pattern to avoid discharge of material
into a trailer or truck. This unit should not be driven up or
toward roads, sidewalks, bystanders and the like. Also,
down ramp(s), because the unit could tip over, causing
avoid discharging material against a wall or obstruction
which may cause discharged material to ricochet back
toward the operator.
serious personal injury. The unit must be pushed
manually on ramp(s) to load or unload properly.
22. Muffler and engine become hot and can cause a burn. Do
7. Always wear safety glasses or safety goggles during
not touch.
operation and while performing an adjustment or repair to
protect your eyes. Thrown objects which ricochet can
23. Check overhead clearances carefully before driving
under low tree branches, wires, door openings etc.,
cause serious injury to the eyes.
where the operator may be struck or pulled from the unit,
8. Wear sturdy, rough-soled work shoes and close-fitting
which could result in serious injury.
slacks and shirts. Loose fitting clothes and jewelry can be
caught in movable parts. Never operate this machine in
24. Disengage all attachment clutches, depress the brake
pedal completely and shift into neutral before attempting
bare feet or sandals.
to start engine.
9. Be aware of the mower and attachment discharge
25. Your machine is designed to cut normal residential grass
direction and do not point it at anyone. Do not operate the
of a height no more than 10”. Do not attempt to mow
mower without the discharge cover or entire grass
through unusually tall, dry grass (e.g., pasture) or piles of
catcher in its proper place.
dry leaves. Dry grass or leaves may contact the engine
10. Do not put hands or feet near rotating parts or under the
exhaust and/or build up on the mower deck presenting a
cutting deck. Contact with the blade(s) can amputate
potential fire hazard.
hands and feet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
26. Use only accessories and attachments approved for this
machine by the machine manufacturer. Read,
understand and follow all instructions provided with the
accessory or attachment.
27. Data indicates that operators, age 60 years and above,
are involved in a large percentage of tractor-related
injuries. These operators should evaluate their ability to
operate the tractor safely enough to protect themselves
and others from serious injury.
dump cart, lawn roller, etc.) on slopes greater than 5
degrees. When going down hill, the extra weight tends to
push the tractor and may cause you to loose control. (e.g.
tractor may speed up, braking and steering ability are
reduced, attachment may jack-knife and cause tractor to
overturn).
Children
1. Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the machine and the mowing activity. They do not
understand the dangers. Never assume that children will
remain where you last saw them.
28. If situations occur which are not covered in this manual,
use care and good judgment. Contact your Yard-Man
dealer for assistance.
Slope Operation
a. Keep children out of the mowing area and in
watchful care of a responsible adult other than the
operator.
b. Be alert and turn machine off if a child enters the
area.
Slopes are a major factor related to loss of control and tip-
over accidents which can result in severe injury or death. All
slopes require extra caution. If you cannot back up the slope
or if you feel uneasy, do not mow it.
c. Before and while backing, look behind and down
for small children.
d. Never carry children, even with the blade(s) shut
off. They may fall off and be seriously injured or
interfere with safe machine operation.
For your safety, use the slope gauge included as part of this
manual to measure slopes before operating this unit on a
sloped or hilly area. If the slope is greater than 15 degrees as
shown on the slope gauge, do not operate this unit on that
area.
e. Use extreme care when approaching blind
corners, doorways, shrubs, trees or other objects
that may block your vision of a child who may run
into the machine.
f. Disengage the cutting blade(s) before shifting in
reverse. The “No-Cut-In Reverse” feature
emphasises not to cut in reverse and to avoid
back-over accidents; do not defeat it.
g. Keep children away from hot or running engines.
They can suffer burns from a hot muffler.
h. Remove key when machine is unattended to
prevent unauthorized operation.
Do:
1. Mow up and down slopes, not across. Exercise extreme
caution when changing direction on slopes.
2. Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.
3. Use slow speed. Choose a low enough speed setting so
that you will not have to stop or shift while on the slope.
Tires may lose traction on slopes even though the brakes
are functioning properly. Always keep machine in gear
when going down slopes to take advantage of engine
braking action.
4. Follow the manufacturer’s recommendations for wheel
weights or counterweights to improve stability of the
machine. Use extra care with grass catchers or other
attachments. These can change stability of the machine.
5. Keep all movement on the slopes slow and gradual. Do
not make sudden changes in speed or direction. Rapid
engagement or braking could cause the front of the
machine to lift and rapidly flip over backwards which
could cause serious injury.
9. Never allow children under 14 years old to operate the
machine. Children 14 years old and over should read and
understand the operation instructions and safety rules in
this manual and should be trained and supervised by a
parent.
Towing
1. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
2. Follow the manufacturers recommendation for weight
limits for towed equipment and towing on slopes.
3. Never allow children or others in or on towed equipment.
4. On slopes, the weight of the towed equipment may cause
loss of traction and loss of control.
6. Avoid starting or stopping on a slope. If tires lose traction,
disengage the blade(s) and proceed slowly straight down
the slope.
Do Not:
1. Do not turn on slopes unless necessary; then, turn slowly
and gradually downhill, if possible.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast downhill.
2. Do not mow near drop-offs, ditches or embankments.
The mower could suddenly turn over if a wheel is over the
edge of a cliff, ditch, or if an edge caves in.
3. Do not try to stabilize the machine by putting your foot on
the ground.
4. Do not use a grass catcher on steep slopes.
5. Do not mow on wet grass. Reduced traction could cause
sliding.
Service
Safe Handling Of Gasoline
1. To avoid personal injury or property damage use extreme
care in handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Serious
personal injury can occur when gasoline is spilled on
yourself or your clothes which can ignite. Wash your skin
and change clothes immediately.
6. Do not shift to neutral and coast downhill. Over-speeding
may cause the operator to lose control of the machine
resulting in serious injury or death.
a. Use only an approved gasoline container.
b. Never fill containers inside a vehicle or on a truck
7. Do not tow heavy pull behind attachments (e.g. loaded
4
Download from Www.Somanuals.com. All Manuals Search And Download.
or trailer bed with a plastic liner. Always place
containers on the ground away from your vehicle
before filling.
complete stop within approximately (5) five seconds after
operating the blade disengagement control. If the blades
do not stop within the this time frame, your unit should be
serviced professionally by an authorized dealer.
4. Check brake operation frequently as it is subjected to
wear during normal operation. Adjust and service as
required.
5. Check the blade(s) and engine mounting bolts at
frequent intervals for proper tightness. Also, visually
inspect blade(s) for damage (e.g., excessive wear, bent,
cracked).
c. When practical, remove gas-powered equipment
from the truck or trailer and refuel it on the ground.
If this is not possible, then refuel such equipment
on a trailer with a portable container, rather than
from a gasoline dispenser nozzle.
d. Keep the nozzle in contact with the rim of the fuel
tank or container opening at all times until fueling
is complete. Do not use a nozzle lock-open
device.
e. Extinguish all cigarettes, cigars, pipes and other
sources of ignition.
f. Never fuel machine indoors.
g. Never remove gas cap or add fuel while the
engine is hot or running. Allow engine to cool at
least two minutes before refueling.
Replace the blade(s) with the original equipment
manufacturer’s (O.E.M.) blade(s) only, listed in this
manual. “Use of parts which do not meet the original
equipment specifications may lead to improper
performance and compromise safety!”
6. Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
h. Never over fill fuel tank. Fill tank to no more than
½ inch below bottom of filler neck to allow space
for fuel expansion.
i. Replace gasoline cap and tighten securely.
j. If gasoline is spilled, wipe it off the engine and
equipment. Move unit to another area. Wait 5
minutes before starting the engine.
k. To reduce fire hazards, keep machine free of
grass, leaves, or other debris build-up. Clean up
oil or fuel spillage and remove any fuel soaked
debris.
l. Never store the machine or fuel container inside
where there is an open flame, spark or pilot light
as on a water heater, space heater, furnace,
clothes dryer or other gas appliances.
m. Allow a machine to cool at least 5 minutes before
storing.
7. Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
8. Never tamper with the safety interlock system or other
safety devices. Check their proper operation regularly.
9. After striking a foreign object, stop the engine, disconnect
the spark plug wire(s) and ground against the engine.
Thoroughly inspect the machine for any damage. Repair
the damage before starting and operating.
10. Never attempt to make adjustments or repairs to the
machine while the engine is running.
11. Grass catcher components and the discharge cover are
subject to wear and damage which could expose moving
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer’s (O.E.M.) parts
only, listed in this manual. “Use of parts which do not
meet the original equipment specifications may lead to
improper performance and compromise safety!”
12. Do not change the engine governor settings or over-
speed the engine. The governor controls the maximum
safe operating speed of the engine.
General Service
1. Never run an engine indoors or in a poorly ventilated
area. Engine exhaust contains carbon monoxide, an
odorless, and deadly gas.
2. Before cleaning, repairing, or inspecting, make certain
the blade(s) and all moving parts have stopped.
Disconnect the spark plug wire and ground against the
engine to prevent unintended starting.
13. Maintain or replace safety and instruction labels, as
necessary.
14. Observe proper disposal laws and regulations for gas,
oil, etc. to protect the environment.
3. Periodically check to make sure the blades come to
Your Responsibility
Restrict the use of this accessory and the tractor to persons who read, understand and follow the warnings and
instructions in this manual and on the machine.
NOTE: Model 190 Triple Bagger Kit is designed for use on Cub Cadet Fast Attach™ compatible tractors equipped
with 50-inch cutting deck only.This will NOT mount, nor operate safely or properly on any other tractor regardless of
the tractor’s compatibility with similar accessories.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: LOOSE PARTS
The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts, including the
hardware pack, from the carton before discarding it. Compare with Figure 1 to check that all parts were included.
Note that the kit and the hardware pack contain extra items which are not used on your unit.
Grasscatcher Cover
Assembly
Support Tube
(attached to cover)
Discharge
Chute
Assembly
Mounting
Bracket
Grass Bag
Blades
Chute Stop
Bracket
Carriage Bolt
Lock Nut
Figure 1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3: ASSEMBLY & OPERATION
NOTE: References to left, right , front and rear of the
tractor are from the operator’s position, unless
otherwise stated.
•
Before assembly, place the tractor on a firm, level
surface, disengage the PTO, stop the tractor
engine and set the parking brake.
Support
Tube
•
For convenience, pivot the seat forward and leave it
in that position until the grass collector is fully
mounted and assembled.
Mounting Bracket Assembly
•
Remove the hairpin clip and clevis pin from the rear
of the mounting bracket assembly.
Position the hooked ends of the bracket assembly
to the outside of the hitch plate and over the
shoulder bolts. See Figure 2.
Mounting
Bracket
•
Hitch Plate
NOTE: Grasscatcher cover not shown here for clarity
Mounting
Bracket
Figure 3
•
Attach the grass bags using the slots shown in
Figure 4. Close the grasscatcher cover.
Slots
Shoulder Bolt
Figure 2
Grass
Bag
Cover
•
Reinsert the clevis pin through the aligned holes
(Figure 2) in both the bracket assembly and the
hitch plate and secure with the hairpin clip.
IMPORTANT: There are two holes in the clevis pin. Be
sure to insert the hairpin clip in the upper hole to
properly secure the bracket assembly to the hitch plate.
Grass Bag
Figure 4
Attaching Grasscatcher Cover and Bags
•
Place the grasscatcher cover assembly’s support
tube in position on the rear of unit by sliding the
support tube down through the center hole in the
mounting bracket assembly. See Figure 3.
Attaching Blades
WARNING: Always protect your hands while
servicing blades by wearing heavy work gloves
or using heavy rags.
NOTE: Two bagging blades are included in the
grasscatcher kit. These will replace the two outer
blades from the deck of the tractor while the center
blade will remain unchanged. Do not try to replace the
center blade with either bagging blade from the kit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Remove the cutting deck from beneath the tractor
(refer to instructions for Deck Removal in your tractor’s
operator’s manual), then gently flip the deck over to
expose its underside.
NOTE: An extra set of carriage bolt and lock nut have
been supplied in your accessory kit. You may replace
the old hardware for the chute stop bracket with these
new ones, or save for later use.
•
•
Place a block of wood between the center deck
housing baffle and the cutting blade to act as a
stabilizer. See Figure 5.
Use a 15/16" wrench to remove the hex flange nut
that secures the blade to the outer blade spindle
assembly. See Figure 5.
Lock Nut
Remove this
chute stop
Carriage Bolt
A
Hex Flange Nut
Wood Block
B
Install this
chute stop
Deck
Chute Deflector
Figure 6
NOTE: This chute stop bracket may stay on the unit
even when the bagger is not being used.
Spindle Assembly
Figure 5
Attaching Discharge Chute
•
•
Raise the deck to its highest position.
Raise the chute deflector on the deck and hold it
while you position the discharge chute over the
chute opening.
WARNING: The hex flange nut has a right-
handed thread pattern. Do not attempt to force
the nut in an incorrect direction; it may damage
the nut and create a safety hazard.
•
•
Insert the hinge pin of the discharge chute into the
tube on the chute stop bracket. See Figure 7.
Rotate the chute around the deck so that its front
edge fits snugly into the deck opening. Lower the
chute deflector slowly.
•
•
•
Place a new blade on top of the outer blade spindle
so that side of the blade with part number faces the
ground when the mower is in the operating position.
Secure with the hex flange nut removed earlier.
Use a torque wrench to tighten the hex flange nut
between 70 to 90 foot-pounds.
Chute Deflector
Replace blade from the other outer blade spindle
with the second blade from the bagger kit.
NOTE: The center blade spindle will continue to use the
standard cutting blade already attached to the deck.
•
Remount the cutting deck following instructions in
the owner’s manual of the tractor.
Discharge
Chute
Insert hinge
pin here
Attaching Chute Stop Bracket
Hinge Pin
Figure 7
•
Remove the carriage bolt and lock nut holding the
chute stop to the deck. See Inset A of Figure 6.
Save the hardware.
•
•
Attach the longer of the three retainer straps on the
discharge chute to the retainer clip on the deck.
Refer to Figure 9.
Insert the curved end of chute tube into the hole in
the grass bag cover as shown in Figure 8.
•
Replace with new chute stop bracket, from the
bagger kit, at the same position on the deck. See
Inset B of Figure 6. Secure with the hardware
removed earlier.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Insert the lower end of the chute tube over the
discharge chute so that its two notches fit into the
two corresponding notches on the discharge chute.
See Figure 9.
Secure by placing the ends of the two short retainer
straps on the discharge chute over the pins on the
chute tube. See Figure 9.
Insert chute tube here
Operation
Your triple bagger kit is a valuable accessory to your
tractor. Optimize its performance by operating
correctly. Do not try to fit it to tractors other than those
specified on page 5.
Figure 8
•
Open the grass bag cover by lifting the cover up.
Do not remove the chute tube assembly from the
tractor.
Place short
strap here
Place long
strap here
•
•
Remove the grass bags by lifting up and moving
the bags away from the support tube assembly.
To empty the grass clippings at a proper disposal
sight, use the handle at the bottom of each grass
bag. Holding the bag firmly, empty the contents.
Under normal usage, the grass bags are subject
to wear and tear. Check these bags periodically
and wash with water if dirty. Allow to air-dry; do
not apply heat.
•
Discharge
Chute
Figure 9
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4: PARTS LIST FOR MODELS 190-190-100 & 190-192-190
14
21
23
26
4
12
22
20
7
3
31
16
16
11
28
8
16
33
30
17
18
16
19
25
27
16
B
8
B
C
8
9
See parts
24
29
9
6
2
16
13
break-down
C
below
15
5
10
Components of Cover Assembly pn # 664-04018:
Components of Bag Assembly:
50
35
45
49
47
A
51
43
40
45
48
34
44
37
46
A
36
42
38
39
40
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Model 190-190-100 & 190-192-190
Ref.
No.
27.
Part No.
Description
Ref.
No.
1.
Part No.
Description
742-04067 Blade : High Lift; Cub Cadet
777D03361 Logo: Cub Cadet
17200A
17247
Catcher Support Bracket
Tubing Adapter
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
2.
783-0601
783-0673
783-0764
783-0765
783-1501
764-0251
17202A
710-1652
720-04018 Screen
726-04027 Push Nut
726-0479
728-0123
731-04166 Grass Bag Cover
731-04189 Retainer Seal
731-0824A Plastic Plate
735-04020 Grass Bag Seal
736-0400
749-0747
17201A
Catcher Support Bracket
Catcher Support Bracket RH
Catcher Support Bracket LH
Bracket: Cross Support
Spacer
Grassbag
Screen Mounting Bracket
TT Screw 1/4-20 x 0.625
631-0221
Chute Elbow
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
664-04018 Cover Assembly (includes ref. 35 to 46)
683-0617 Bracket Assembly: Chute Stop
689-00002 Grasscatcher Support Assembly
710-0597
710-0751
710-3008
710-3168
711-0309A Clevis Pin
711-04069 Grasscatcher Pin
712-0130
712-0431
712-3004A Flange Lock Nut 5/16-18
712-3027
714-0117
723-04008A Chute Strap
726-3040
723-0476
731-0926B Catcher Tube
731-2299A Extension Tube
736-0253
736-0270
736-3092
738-0380
Hex Bolt 1/4-20 x 1.0
Hex Bolt 1/4-20 x 0.620
Hex Bolt 5/16-18 x 0.75
Carriage Bolt
Ratchet Clip
Pop Rivet
Hex Lock Nut 3/8-16
Flange Lock Nut 3/8-16
Flange Lock Nut 1/4-20
Hairpin Clip
Flat Washer
Push Nut
Chute Strap
Hinge Bracket
Bag Hanger Bracket
Machine Screw
710-0473
710-0604A TT Screw 5/16-18 x 0.625
712-0272 Hex Sems Nut
749-0745A Tube: Grass Bag Frame
Beleville Washer
Bell Washer
Flat Washer
Shoulder Screw
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S LIMITED WARRANTY FOR:
The limited warranty set forth below is given by Cub Cadet
LLC with respect to new merchandise purchased and used in
the United States, its possessions and territories.
possesions and territories, except those sold through
Cub Cadet’s authorized channels of export
distribution.
e.
f.
Replacement parts that are not genuine Cub Cadet
parts.
Service completed by someone other than an
authorized service dealer.
“Cub Cadet” warrants this product against defects in material
and workmanship for a period of two (2) years commencing
on the date of original purchase and will, at its option, repair or
replace, free of charge, any part found to be defective in
materials or workmanship. This limited warranty shall only
apply if this product has been operated and maintained in
accordance with the Operator’s Manual furnished with the
product, and has not been subject to misuse, abuse,
commercial use, neglect, accident, improper maintenance,
alteration, vandalism, theft, fire, water, or damage because of
other peril or natural disaster. Damage resulting from the
installation or use of any part, accessory or attachment not
approved by Cub Cadet for use with the product(s) covered
by this manual will void your warranty as to any resulting
damage.
g.
Transportation charges and service calls.
No implied warranty, including any implied warranty of
merchantability of fitness for a particular purpose,
applies after the applicable period of express written
warranty above as to the parts as identified. No other
express warranty, whether written or oral, except as
mentioned above, given by any person or entity,
including a dealer or retailer, with respect to any product,
shall bind Cub Cadet. During the period of the warranty,
the exclusive remedy is repair or replacement of the
product as set forth above.
Normal wear parts are warranted to be free from defects in
material and workmanship for a period of thirty (30) days from
the date of purchase. Normal wear parts include, but are not
limited to items such as: batteries, belts, blades, blade
adapters, grass bags, rider deck wheels, seats, snow thrower
skid shoes, shave plates, auger spiral rubber and tires.
The provisions as set forth in this warranty provide the
sole and exclusive remedy arising from the sale. Cub
Cadet shall not be liable for incidental or consequential
loss or damage including, without limitation, expenses
incurred for substitute or replacement lawn care services
or for rental expenses to temporarily replace a warranted
product.
HOW TO OBTAIN SERVICE: Warranty service is available,
WITH PROOF OF PURCHASE, through your local authorized
service dealer. To locate the dealer in your area, check your
Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,
Cleveland, Ohio 44136-0019, or call 1-877-282-8684, or log
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or
limitations may not apply to you.
In no event shall recovery of any kind be greater than the
amount of the purchase price of the product sold. Alteration
of safety features of the product shall void this warranty.
You assume the risk and liability for loss, damage, or injury to
you and your property and/or to others and their property
arising out of the misuse or inability to use the product.
This limited warranty does not provide coverage in the
following cases:
a.
The engine or component parts thereof. These items
may carry a separate manufacturer’s warranty. Refer
to applicable manufacturer’s warranty for terms and
conditions.
This limited warranty shall not extend to anyone other than the
original purchaser or to the person for whom it was purchased
as a gift.
b.
c.
Log splitter pumps, valves, and cylinders have a sepa
rate one year warranty.
Routine maintenance items such as lubricants, filters,
blade sharpening, tune-ups, brake adjustments, clutch
adjustments, deck adjustments, and normal
deterioration of the exterior finish due to use or
exposure.
HOW STATE LAW RELATES TO THIS WARRANTY: This
limited warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
IMPORTANT: Owner must present Original Proof of
Purchase to obtain warranty coverage.
d.
Cub Cadet does not extend any warranty for products
sold or exported outside of the United States, its
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-877-282-8684
Download from Www.Somanuals.com. All Manuals Search And Download.
|