| 	
		 Series   
					Start Here   
					1 
					Unpack   
					(Included for   
					Canada only)   
					Phone cord   
					Power cord   
					If anything is missing, contact Epson as described on the back.   
					Caution: Do not open ink cartridge packages until you are ready to install the ink.   
					Cartridges are vacuum packed to maintain reliability.   
					Canada only: For French speakers, remove the sticker from the backing sheet and   
					place it on the right side of the control panel.   
					Remove all protective materials from the printer, including from inside the   
					paper cassette.   
					1 
					Raise the scanner and remove the transportation lock.   
					2 
					3 
					Store the transportation lock as shown.   
					Lower the scanner.   
					2 
					1 
					Turn on and adjust   
					Connect the power cable.   
					ꢀCaution: Do not connect to your   
					computer yet.   
					*411685500*   
					*411685500*   
				2 
					Press the   
					control panel.   
					On button, then raise the   
					To lower the control panel, press the   
					Unlock button.   
					Caution: To avoid damaging your Artisan 810   
					Series, always press the Unlock button to lower   
					the control panel.   
					3 
					1 
					Make settings   
					Select your language and country.   
					Touch the screen to select the desired option. Press or to see more   
					countries.   
					2 
					For the Daylight Saving Time setting, select Summer if your region uses   
					Daylight Saving Time and it’s currently in effect. (DST is effective from   
					spring through summer.) Otherwise, select Winter to turn off the setting.   
					Press OK.   
					3 
					4 
					5 
					6 
					7 
					Select the date format.   
					Use the numeric keypad to set the date, then press OK.   
					Select the time format.   
					Use the numeric keypad to set the time.   
					Press OK when done.   
					Note: You can change the date and time settings by pressing the Home button,   
					selecting Setup, selecting Printer Setup, then Date/Time. For more information on   
					using and adjusting the control panel, see your Quick Guide.   
				4 
					Install ink cartridges   
					Note: Do not load paper yet.   
					1 
					Lift up the scanner.   
					2 
					3 
					Unpack the ink cartridges.   
					Remove only the yellow tape from each cartridge.   
					Caution: Don’t remove any other seals or the cartridges may leak.   
					4 
					Insert the cartridges in the holder for each color. Press each cartridge   
					down until it clicks.   
					5 
					6 
					Lower the scanner.   
					Wait while ink charges. Charging takes about 5 minutes.   
					Note: Your Artisan 810 Series ships with full cartridges and part of the   
					ink from the first cartridges is used for priming the Artisan 810 Series.   
					Replacement cartridges will print more pages.   
					Caution: Don’t turn off the Artisan 810 Series while the ink system is   
					initializing or you’ll waste ink.   
					5 
					Load paper   
					The paper cassette has 2 trays. The main tray is for letter-size, legal-size,   
					or 8 x 10-inch paper. The photo tray is for 4 x 6- or 5 x 7-inch photo paper.   
					1 
					Pull out the paper cassette. Then slide back the photo tray and lift it up.   
				2 
					3 
					Squeeze the edge guides and slide them out. Then insert paper with the   
					glossy or printable side face-down.   
					Slide the edge guides against the paper.   
					4 
					5 
					Lower the photo tray.   
					Squeeze the edge guides and slide them out. Then insert 4 x 6-inch or   
					5 x 7-inch photo paper with the glossy or printable side face-down.   
					Note: Make sure the paper fits under the edge guides.   
					6 
					7 
					Slide the edge guides against the paper.   
					Keep the cassette flat as you insert it.   
					8 
					Extend the output tray and flip up the stopper.   
				6 
					Connect the phone cord   
					To use the Artisan 810 Series for faxing, connect the included phone cord from   
					a telephone wall jack to the LINE port on the Artisan 810 Series. To connect a   
					telephone or answering machine, see the Quick Guide for instructions.   
					Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t   
					be able to fax. Contact your DSL provider for the necessary filter.   
					7 
					Choose your connection   
					
					See your Network Installation   
					Guide. You can’t install your   
					software as described below.   
					OR   
					USB connection   
					Make sure you have a USB cable (not included).   
					Then follow the steps below.   
					USB connection   
					Follow these steps to connect the Artisan 810 Series directly to your computer   
					using a USB cable (not included).   
					® 
					Windows   
					1 
					Make sure the Artisan 810 Series is   
					NOT CONNECTED to your computer.   
					Note: If you see a Found New Hardware   
					screen, click Cancel and disconnect the   
					USB cable. You can’t install your software   
					that way.   
					2 
					3 
					Insert the Artisan 810 Series software CD.   
					With Windows Vista®, if you see the AutoPlay   
					window, click Run Epsetup.exe. When you see the   
					User Account Control screen, click Continue.   
					Click Install and follow the on-screen instructions.   
					
				4 
					5 
					When you see this screen, select Install driver for direct USB   
					connection and then click Next.   
					When prompted, connect a USB cable. Use any open USB port on your   
					computer.   
					Note: If installation doesn’t continue after a moment, make sure you   
					securely connected the USB cable and turned on the Artisan 810 Series.   
					6 
					7 
					Follow the on-screen instructions to install the rest of the software, set up   
					your fax header, and register your Artisan 810 Series.   
					Be sure to register your Artisan 810 Series to receive these great benefits:   
					2-year limited warranty and 2-year toll-free customer support.*   
					When you’re done, remove the CD.   
					You’re ready to go! Enjoy your Artisan 810 Series! See your Quick Guide or   
					online Epson Information Center for instructions.   
					® 
					Macintosh   
					1 
					Make sure the Artisan 810 Series is NOT CONNECTED to your computer.   
					2 
					3 
					4 
					Insert the Artisan 810 Series software CD.   
					Double-click the   
					Epson icon.   
					Click Install and follow the on-screen instructions.   
					5 
					When you see this screen, select Install driver for direct USB   
					connection and then click Next.   
				6 
					When prompted, connect a USB cable. Use any open USB port on your   
					computer. Make sure the Artisan 810 Series is securely connected and   
					turned on.   
					Mac OS X 10.5 users: skip to step 9. Other users: continue with step 7.   
					7 
					When you see this screen, click Add Printer. Follow the steps on the right   
					side of the screen to add the Artisan 810 Series.   
					8 
					9 
					Click Next again, if necessary.   
					Follow the on-screen instructions to install the rest of the software and   
					register your Artisan 810 Series.   
					Be sure to register your Artisan 810 Series to receive these great benefits:   
					2-year limited warranty and 2-year toll-free customer support.*   
					10 When you’re done, eject the CD.   
					You’re ready to go! Enjoy your Artisan 810 Series! See your Quick Guide or   
					online Epson Information Center.   
					Any questions?   
					Quick Guide   
					Basic instructions for scanning, printing, copying, faxing,   
					and using the control panel.   
					Online Epson Information Center   
					Click the desktop shortcut for easy access to the   
					Artisan 810 Series user’s guide, how-to videos,   
					FAQs, online troubleshooting advice, and software   
					downloads. You can also purchase paper and ink.   
					Note: You will need an Internet connection to view the   
					Epson Information Center. If you can’t find the desktop   
					shortcut, you can also view the Epson Information Center at epson.com/support.   
					Network Installation Guide and Video   
					Instructions on configuring the Artisan 810 Series for a   
					network. For a video tutorial and other information about setting   
					up a wireless network, go to: epson.com/support/wireless   
					On-screen help with your software   
					Select Help or ? when you’re using your software.   
					Epson Technical Support   
					Internet Support   
					Visit Epson’s support website at epson.com/support and select your   
					product for solutions to common problems. You can download drivers and   
					documentation, get FAQs and troubleshooting advice, or e-mail Epson with   
					your questions.   
					Speak to a Support Representative   
					As a valued Artisan customer, we are providing you with an exclusive toll-free   
					telephone number and PIN ID (Personal Identification Number) to use if you   
					require assistance in setting up your product.   
					Telephone number: (866) 930-4288   
					PIN ID: 7082255   
					You may also speak with a support specialist by calling (562) 276-4382 (U.S.) or   
					(905) 709-3839 (Canada), 6 AM to 6 PM, Pacific Time, Monday through Friday.   
					Days and hours of support are subject to change without notice. Toll or long   
					distance charges may apply.   
				Software Technical Support   
					ArcSoft Print Creations™   
					
					NewSoft® Presto! PageManager®   
					(408) 503-1212   
					
					
					Need paper and ink?   
					Try Epson premium papers with Claria® ink for better than photo lab quality   
					results. For the right supplies at the right time, you can purchase them at Epson   
					
					(Canadian sales). You can also purchase supplies from an Epson authorized   
					reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766).   
					Genuine Epson Paper   
					Epson offers a wide variety of papers to meet your needs; visit Epson Supplies   
					Central for more information.   
					Ultra Premium Photo Paper Glossy   
					Instant-drying high gloss paper for long-lasting photos,   
					suitable for framing.   
					Genuine Epson Inks   
					Look for the numbers below to   
					find your cartridges. It’s as easy   
					as remembering your number!   
					Color   
					Black   
					Standard-capacity   
					High-capacity   
					— 
					99   
					99   
					99   
					99   
					99   
					98   
					98   
					98   
					98   
					98   
					98   
					Cyan   
					Magenta   
					Yellow   
					Light Magenta   
					Light Cyan   
					* 1-year limited warranty to all purchasers; 2-year toll-free support and second year warranty require   
					registration within 60 days of purchase. For California and Québec residents, failure to submit this   
					product registration form does not diminish your warranty rights.   
					Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark and Supplies   
					Central is a service mark of Seiko Epson Corporation. Artisan and Claria are registered trademarks of   
					Epson America, Inc.   
					General Notice: Other product names used herein are for identification purposes only and may be   
					trademarks of their respective owners. Epson disclaims any and all rights in those marks.   
					This information is subject to change without notice.   
					© 2009 Epson America, Inc. 5/09   
					CPD-27513   
					Cut out the card to the   
					right and keep it with   
					you when purchasing   
					replacement ink   
					® 
					Artisan 810 Series Ink Cartridges   
					Color   
					Standard-capacity   
					High-capacity   
					cartridges.   
					Black   
					— 
					99   
					99   
					99   
					99   
					99   
					98   
					98   
					98   
					98   
					98   
					98   
					Cyan   
					Magenta   
					Yellow   
					Light Magenta   
					Light Cyan   
					Printed in XXXXXX   
					Printed in XXXXXX   
				 |