DSB-122L/122LH(
) 01.8.175:29PM
20
OWNER'S MANUAL
SPLIT AIRCONDITIONING SYSTEM
MODEL #:
DSB-122L/DSB-122LH
S1
DSB-122L/122LH(
) 01.8.175:27PM
2
CONTENTS
It is recommended that you read the Installation and Operating instructions fully before installing and/or operating this
unit.
Safety Instructions ...........................................................................................................................................................1
Contents...........................................................................................................................................................................2
Basic Accessories ...........................................................................................................................................................3
Optional Accessories.......................................................................................................................................................4
Location of Controls.........................................................................................................................................................5
Indoor Unit........................................................................................................................................................5
Outdoor Unit.....................................................................................................................................................5
Remote Controller............................................................................................................................................7
Remote Display................................................................................................................................................7
Operation.........................................................................................................................................................................9
Connecting the AC Cord..................................................................................................................................9
How to Store The Remote Controller...............................................................................................................9
Setting the Unit for Remote Operation.............................................................................................................9
How to Install Batteries ..................................................................................................................................10
Celsius to Fahrenheit Conversion Chart........................................................................................................10
To Set Auto Mode ..........................................................................................................................................11
To Set Quick Mode ........................................................................................................................................11
To Set Cool Mode ..........................................................................................................................................11
To Set Fan Only Mode...................................................................................................................................12
To Set Dehumidifier Mode .............................................................................................................................12
To Set Heat Mode(DSB-122LH Only) ...........................................................................................................13
To Select The Fan Direction ..........................................................................................................................13
To Set On Timer Mode ..................................................................................................................................14
To Set Off Timer Mode...................................................................................................................................14
To Set Unit to Sleep Mode.............................................................................................................................15
To Set Turbo/Mild Mode ................................................................................................................................15
Emergency Operation....................................................................................................................................15
Changing/Cleaning the Air Filters..................................................................................................................................16
Cleaning the Indoor Cover ............................................................................................................................................16
Care and Maintenanc....................................................................................................................................................17
Troubleshooting Guide..................................................................................................................................................18
Specifications.................................................................................................................................................................19
2
DSB-122L/122LH(
) 01.8.175:27PM
3
BASIC ACCESSORIES
This Installation section explains how and where to connect this new air conditioner. Please read make sure all acces-
sories are included as shown below and read manual thoroughly. This Installation section is provided to assist the per-
son knowledgeable in air conditioner installation and should not be installed by anybody who is not thoroughly familiar
with this type of installation. Please contact a professional installer if necessary.
ACCESSORIES SUPPLIED WITH THE UNIT:
3
2
1
6
7
4
5
8
9
No.
Description
Qty.
No.
Description
Qty.
1
2
3
4
5
Wall Bracket
1
1
1
2
4
6
7
8
9
Concrete Nails
5
8
1
1
Outdoor Unit Cover
Remote Controller
Battery
Wall Bracket Screws
Deodorizing Filter
Electrostatic Filter
Foot Cushion
COPPERTUBING:
Copper tubing supplied is available at most dealers or A/C shops. Make sure the new copper tubing has the exact same
specifications and diameter as the original copper tubing and is as short as possible.
3
DSB-122L/122LH(
) 01.8.175:27PM
4
OPTIONAL ACCESSORIES
ACCESSORIES NOT SUPPLIED WITH THE UNIT:
3
2
1
4
6
7
8
5
(DSB-122LH Only)
No.
Description
Part No.
Qty
Material
Size
1
2
3
4
5
6
7
8
Drain Hose Extension
Tape
3103200200
2TQ1008000
3100002600
3103301000
2221040001
3102797200
3102796360
3100900600
1
1
1
1
1
1
1
2
PVC
PVC
ID19.6 X 2m PVC Pipe
80W X 0.1T X 3.5m
1/2", 1/4" Copper Tube
225 X 120 X 8T
Copper Tubing Extension
Insulator Plate
Putty
F-US
80g
Connection Cord
Signal line Cord
Cap Wall
(1.5mm2 X 6m X 3P)
(1.5mm2 X 6m X 2P)
P.P.
Complete Optional
3100019000
1
Accessories (1, 2, 3, 4, 5, 6, 7, 8)
4
DSB-122L/122LH(
) 01.8.175:27PM
5
LOCATION OF CONTROLS
INDOOR UNIT
Indoor Cover
Air In
Deodorizing Filter
Removes bad smells
from the air.
Remote Controller
Storage
Electrostatic Filter
Removes dust
particles from the air.
Connection Cover
Remove cover to access
the AC connection from
this unit to the outdoor unit.
Air Cleaning Filters
Removes dust and
prohibits germs.
Cold Air
Sensor Wire
(DSB-122LH Only)
Indicators
Indicate the setting
Fan Direction
(Up/Down)
Remote Sensor
Emergency/Remote
Switch
Slide to select the
desired position.
Power Plug
LCD Remote Controller
OUTDOOR UNIT
AIR IN
Connection Cover
Remove cover to access the AC connection
to the indoor unit.
AIR OUT
Service Valves
The indoor and outdoor units
are connected by copper tubes
which are connected here.
5
DSB-122L/122LH(
) 01.8.175:27PM
6
INDOOR UNIT
Indoor Unit Display
Switch Panel
IRemote Control Signal Receiver
This place is the part to receive the signal if it receive
the signal, you can hear the signal “beep”.
EMERGENCY
REMOTE
ON
AIR
QUICK
TIMER
CLEAN
IIWhen the remote controller is lost or out-
of-order, push the emergency button
(EMERGENCY) to operate by hand.
Timer (Green)
Lights-on during the time
of reservation mode.
ON (Red)
Lights-on
during the operation
Open the front panel on emergency operating.
Remocon switch is usually used with remote con-
troller.
Quick (Green)
Lights-on during the time
of Quick Mode.
Air clean (Green)
Lights-on
during the operation
6
DSB-122L/122LH(
) 01.8.175:27PM
7
DSB-122L
REMOTE CONTROLLER
AUTO
Display
Displays information
pertaining to unit.
ON/OFF Button
Press to turn the unit
on or off.
TEMPERATURE Buttons
Press to raise or lower
the desired temperature.
FAN SPEED Button
Press to select the fan speed
(High " ", Middle " ",
Low " ", Natural).
MODE
SLEEP
FAN SPEED
FAN DIR.
FAN DIR.
Button
TIMER
Press to select up/down
direction for fan.
MODE Button
Press to cycle through the modes
(Auto/Quick/Cool/Fan/Dehumidifier)
ON/OFF
ENTER/
TURBO/MILD
CANCEL
SLEEP Button
Press to set the unit for
the sleep mode.
TURBO/MILD
Press to be colder the unit.
TIMER ON/OFF Button
Press to set the unit of or on time.
(0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8,
10, 12, 16, 20, 24hr)
COVER
TIMER ENTER/CANCEL Button
Press to enter a timer setting or
to cancel timer setting
Slide down to access most
of the remote buttons.
Slide down further to
access the battery
compartment.
REMOTE DISPLAY
MODE Indicators (Auto/Quick/Cool/Fan/Dehumidifier)
Lights to indicate the mode selected.
AUTO
FAN Indicators
Lights to indicate
the fan speed.
FAN DIRECTION Indicators
Lights to indicate the
fan direction.
NATURAL Indicator
Lights to indicate the
speeds simulating a breeze.
TIMER Indicators (Include sleep)
Lights to indicate the timer function mode.
TEMPERATURE & RESERVATION TIME lndicat
Lights to indicate the temperature or time.
7
DSB-122L/122LH(
) 01.8.175:27PM
8
DSB-122LH
REMOTE CONTROLLER
AUTO
Display
Displays information
pertaining to unit.
ON/OFF Button
Press to turn the unit
on or off.
TEMPERATURE Buttons
Press to raise or lower
the desired temperature.
FAN SPEED Button
Press to select the fan speed
(High " ", Middle " ", Low " ",
Natural)
FAN DIR.
Button
MODE
SLEEP
FAN SPEED
FAN DIR.
Press to select up/down
direction for fan.
MODE Button
TIMER
Press to cycle through the modes
(Auto/Quick/Cool/Fan/Dehumidifier
/Heat)
TURBO/MILD
Press to be colder the unit.
ON/OFF
ENTER/
TURBO/MILD
CANCEL
SLEEP Button
Press to set the unit for
the sleep mode.
TIMER ON/OFF Button
Press to set the unit of or on time.
(0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8,
10, 12, 16, 20, 24hr)
TIMER ENTER/CANCEL Button
Press to enter a timer setting or
to cancel timer setting
COVER
Slide down to access most
of the remote buttons.
Slide down further to
access the battery
compartment.
REMOTE DISPLAY
MODE Indicators (Auto/Quick/Cool/Fan/Dehumidifier/Heat)
Lights to indicate the mode selected.
AUTO
FAN Indicators
Lights to indicate
the fan speed.
FAN DIRECTION Indicators
Lights to indicate the
fan direction.
NATURAL Indicator
Lights to indicate the
speeds simulating a breeze.
TIMER Indicators (Include sleep)
Lights to indicate the timer function mode.
TEMPERATURE & RESERVATION TIME lndicat
Lights to indicate the temperature or time.
8
DSB-122L/122LH(
) 01.8.175:27PM
9
OPERATION
CONNECTING THE AC CORD
The outdoor unit is connected to the indoor unit through the AC connecting wire or connection cord. To connect the in-
door unit to AC, follow the procedures below:
1. Insert the at-
NOTES:
tached AC plug
into a pronged
220V AC outlet.
AC Outlet
and Plug
• Never connect the AC line cord plug to other than the
specified voltage (220V).
• Use the attached power cord only.
• The new air conditioner system should be on it’s own
220V circuit. Contact your local electrical installer for in-
stallation.
Plug into 220V AC Outlet.
HOW TO STORE THE REMOTE CONTROLLER
To store the remote controller, follow the procedures below:
1. Remove the left and right side to open the indoor
cover upward.
2. Store the remote controller.
• Please remove and insert
• the indoor cover by two hands.
(Remove it when using)
3. Press the left and right side to close the indoor cover.
SETTING THE UNIT FOR REMOTE OPERATION
After the unit is fully connected and plugged in, it can be turned on. To turn the unit on and set it for remote operation,
follow the procedures below:
1. Open the indoor unit’s cover and make sure the
EMERGENCY/REMOTE switch is set to the REMOTE
position; this will allow the unit to operate with the re-
mote controller.
2. Press the ON/OFF button on the remote controller to
turn on the unit. The On LED will light on the indoor
unit and “ON” will light in the remote display.
To select the various modes
and settings, read the fol-
lowing pages.
THREE MINUTE COMPRESSOR DELAY
EMERGENCY/REMOTE Switch
• After turning the indoor unit on and setting it for air con-
ditioner operation, the compressor (outdoor unit) will
not come on for three minutes. This is a feature that
will protect the compressor from damage due to quick
start and stops.
EMERGENCY
REMOTE
9
DSB-122L/122LH(
) 01.8.175:27PM
10
HOW TO INSTALL BATTERIES
To install the batteries, follow the procedures below:
TIMER
2. Insert two “AAA” size
Alkaline batteries fol-
lowing the polarity dia-
gram below.
1. Slide down the cover to access
most of the remote buttons. Slide
down further to access the bat-
tery compartment.
ON/OFF
ENTER/
CANCEL
TURBO/MILD
+
–
–
+
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufac-
turer’s directions).
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS
FAHRENHEIT
CELSIUS
FAHRENHEIT
18
19
20
21
22
23
24
25
64.4
66.2
68
26
27
28
29
30
31
32
78.8
80.6
82.4
84.2
86
69.8
71.6
73.4
75.2
77
87.8
89.6
NOTES:
• When operating the remote controller, make sure there are no obstructions between the remote controller and the re-
mote sensor.
• After a while the display goes blank to conserve battery power. To check the settings, press the ON/OFF button once.
10
DSB-122L/122LH(
) 01.8.175:27PM
11
TO SET AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is
the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
AUTO
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
2. Make sure the AUTO indicator
appears in the remote
display. Using the TEMP. ▼ or ▲ buttons, set the desired
temperature. The desired temperature can be changed up
or down 1 degree from the actual
remote display.
room temperature. For tempera-
ture setting: 24~28°C
3. Then the unit will automatically operate.
AUTO
TO SET QUICK MODE
To set this unit to cool at the highest power, follow the procedures below:
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the re-
2. Press the MODE button until the Quick indicator
appears in the display.
mote display.
The unit will then start cooling the room at the highest
power.
3.
TO SET COOL MODE
To set the unit to cool the room to a desired temperature, follow the procedures below:
1.Press the ON/OFF button on
the remote control to turn the
unit on; the On LED will light
on the indoor unit and “ON”
will light in the remote display.
2.Press the MODE button until the Cool
indicator appears in the display.
4. To select the fan speed, press the FAN
SPEED button until the desired speed
appears in the display (see below).
3.Using the TEMP. ▼ or ▲ buttons, set the desired
temperature. The desired tem-
perature can be changed up to
32°C and down to 18°C.
FAN SPEEDS
AUTO
“AUTO”
The fan will automatically select the fan speed.
“
“
“
”
”
”
The fan will operate on low speed.
The fan will operate on medium speed.
The fan will operate on high speed.
“NATURAL” The fan will randomly cycle through the speeds
simulating a cool breeze.
11
DSB-122L/122LH(
) 01.8.175:28PM
12
TO SET FAN ONLY MODE
To operate only the fan so the unit will circulate the air, proceed as follows:
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the remote display.
2.Press the MODE button until the Fan indicator
appears in the display.
No allowance setting temperature
3. To select a fan speed, press the FAN SPEED button
until the desired speed appears in the display (see be-
low).
FAN SPEEDS
NOTE:
“
“
“
”
”
”
The fan will operate on low speed.
The fan will operate on medium speed.
The fan will operate on high speed.
• If “NATURAL” is selected, the NATURAL” indicator on
the indoor unit will light.
“NATURAL” The fan will randomly cycle through the
speeds simulating a breeze.
TO SET DEHUMIDIFIER MODE
Select this mode when there is high humidity. To select, follow the procedures below.
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the remote display.
2.Press the MODE button until the Dehumidifier indica-
tor appears in the display.
Using the TEMP. or buttons, set the desired tem-
perature. The desired temperature can be changed up
3.
▼
▲
to 32°C and down to 18°C.
12
DSB-122L/122LH(
) 01.8.175:28PM
13
TO SET HEAT MODE (DSB-122LH ONLY)
To set the unit to heat the room to a desired temperature, follow the procedures below:
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
2.Press the MODE button until the Heat indicator
appears in the display.
In the heat mode, the fan direction
▼ or ▲ is further downward than
that in the cool mode for the good
circulation.
remote display.
4. To select the fan speed, press the FAN
SPEED button until the desired speed
appears in the display (see below).
3.Using the TEMP. ▼ or ▲ buttons, set the desired
temperature. The desired temperature can be
changed up to 32°C and
down to 18°C.
NOTE:
When the heating orperation is started, hot air delivery
might be delayed due to warm up period.
FAN SPEEDS
“AUTO”
The fan will automatically select the fan
speed.
“
“
“
”
”
”
The fan will operate on low speed.
The fan will operate on medium speed.
The fan will operate on high speed.
“NATURAL” The fan will randomly cycle through the
speeds simulating a cool breeze.
TO SELECT THE FAN DIRECTION
Regardless of the mode the unit is set for, the fan direction can be changed so it moves up and down, left and right or
both. Follow procedures below to set fan direction.
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
2.Press the MODE button to select the desired mode.
remote display.
3. Press the FAN DIR. button to select
the fan direction. See chart below
for detailed information on each of
the three settings.
FAN DIR.
FAN DIR.
First Press
The air will flow up
and down.
Second
Press
Normal air direction.
13
DSB-122L/122LH(
) 01.8.175:28PM
14
TO SET ON TIMER MODE
This unit can be set to automatically turn on after a predetermined amount of hours (up to 24) in the order of 0.5, 1, 1.5,
2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 16, 20, 24.
1. Press the ON/OFF button of timer on the remote control to set the on timer mode, “HOUR” and “ON” on the remote
display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired
time. Then, if pressing “ENTER/CANCEL” button, ON TIMER Mode will be started. If you want to stop ON TIMER
Mode, please press “ENTER/CANCEL” again.
2. While the unit is off, press the TIMER
ON button; the display will light waiting
input for the timer, but the actual unit
will not turn on.
Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indi-
cator on the remote will light to indi-
cate the unit is in the timer mode.
3.Repeatedly press the TIMER ON button until the de-
sired hour that you want the unit to turn on appears
on the display. For example, if it is
1:00 P.M. and you want the unit to
turn on at 4:00 P.M., select 3 hours.
4.
Place the remote controller so it is facing the unit.
When the desired hour is reached, the unit will turn on
to the selected mode.
5.
AUTO
NOTE : Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 sec-
onds elapse, steps 3 and 4 must be repeated.
TO SET OFF TIMER MODE
This unit can be set to automatically turn off after a predetermined amount of hours (up to 12) in the order of 0.5, 1, 1.5,
2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12.
1. Press the ON/OFF button of timer on the remote control to set the off timer mode, “HOUR” and “OFF” on the re-
mote display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get de-
sired time. Then, if pressing “ENTER/CANCEL” button, OFF TIMER Mode will be started. If you want to stop OFF
TIMER Mode, please press “ENTER/CANCEL” again.
2. Press the TIMER OFF button once to
AUTO
enter the Timer screen.
Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indi-
3.Repeatedly press the TIMER OFF button until the de-
sired hour that you want the unit to shut off appears
on the display. For example, if it is
4.
cator on the remote will light to indi-
8:00 P.M. and you want the unit to
cate the unit is in the timer mode.
turn off at 10:00 P.M., select 2 hours.
Place the remote controller so it is facing the unit.
When the desired hour is reached, the unit will turn
off.
5.
AUTO
NOTE: Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 sec-
onds elapse, steps 3 and 4 must be repeated.
14
DSB-122L/122LH(
) 01.8.175:28PM
15
TO SET UNIT TO SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
1. Press the ON/OFF button on the
remote control to turn the unit
on; the On LED will light on the
indoor unit and “ON” will light in
the remote display.
2.Press the MODE button to select the
desired mode. Then, set the desired
temperature using the TEMP. ▲ or ▼
buttons.
Press the SLEEP button on the re-
mote controller. The unit will then be
in the sleep mode and will cool the
room to the desired temperature. After
a while the unit will increase the tem-
perature again. This process will then
repeat.
3.
TO CANCEL SLEEP MODE:
To cancel sleep mode,
AUTO
press the SLEEP button
again; the SLEEP indicator
will disappear in the dis-
play.
TO SET TURBO/MILD MODE
1. The unit is fixed “MILD” mode on production.
2. Press the “TURBO/MILD” button for powerful cooling.
3. When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
1.Open the indoor unit’s cover and make sure the
EMERGENCY/REMOTE switch is set to the EMER-
GENCY position.
2.The unit will then turn on and depending on the room
temperature, it will select the cool or dehumidifier, fan
speed and fan direction automatically.
EMERGENCY/REMOTE Switch
To turn the unit off, slide the
EMERGENCY/ REMOTE
switch to the REMOTE position.
3.
EMERGENCY/REMOTE Switch
15
DSB-122L/122LH(
) 01.8.175:28PM
16
CHANGING/CLEANING THE AIR FILTERS
To change or clean the two black air filters, follow the procedures below:
1.Open the indoor unit’s
cover and remove both
black air filters by bending
them slightly backward
and the lifting out.
2.Remove the two small
filters (Deodorizing and
Electrostatic) from the
indoor unit.
3. Examine the filters and determine if they need to be
cleaned or replaced. To clean filters, use a vacuum and
clean off dust. Use water and mild soap also if necessary.
4.Insert cleaned or new
small filters (Deodorizing
and Electrostatic) back
into the unit.
5. Insert cleaned or new black
filters back into the unit.
NOTES:
• The filters should be changed every 6 months.
If in a climate with cold winters, once a year is adequate.
• After getting rid of vinyl in the filter (Deodorizing and
Electrostatic), use it.
CLEANING THE INDOOR COVER
To clean the indoor cover, follow the procedures below:
1. Remove the left and right side to open the indoor cov-
2. Pushing forward the indoor cover.
er upward by two
hands.
NOTE: Please remove
and insert the in-
door cover by
two hands.
3. Remove the indoor cover.
3. (Remove it when cleaning.)
4. Cleaning the indoor cover.
NOTES:
• Wipe the indoor cover with soft sponge or soft cloth.
• When cleaning up it in the state of opening the indoor cover, wipe it with soft cloth.
• After drying it completely in the shade, assemble it.
• If you do not so, it may cause a trouble.
• Reassemble the indoor cover is reverse process of assemble
16
DSB-122L/122LH(
) 01.8.175:28PM
17
CARE AND MAINTENANCE
warning
• Make sure the AC cord is unplugged and the unit is off before cleaning.
• Do not use water on the unit to clean it. This is a shock hazard and the unit can be damaged.
Clean the casing and front of the indoor unit with a vacuum brush or wipe with a clean damp cloth.
• NEVER USE Solvents, harsh chemicals or hot water to clean the unit.
• Some metal edges on the unit are sharp. Be careful when cleaning or handling.
• Internal parts in the outdoor unit may need cleaning or routine maintenance from time to time. Consult your local ser-
vice center for more details.
AFTER THE SEASON:
• Operate the fan, then dry the indoor unit.
• Shut off the indoor unit and then unplug it from the wall.
• Clean the air filters.
• Cover the outdoor unit with the supplied cover; this is very important to protect this unit.
BEFORE THE SEASON:
• Make sure the air filters are clean.
• Make sure the inlet and outlet on the indoor and outdoor units are not blocked by obstructions.
• Make sure the unit is grounded. Consult a serviceman for help.
PRECAUTIONS:
• Do not use this unit for animal or plant storage.
• In a lightning or thunder storm, immediately unplug it from the wall.
17
DSB-122L/122LH(
) 01.8.175:28PM
18
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the chart below for possible solutions:
SYMPTOMS
POSSIBLE CAUSE
POSSIBLE SOLUTIONS
Restore the power
No power
.
Power failure.
Line voltage too low.
Contact electrician to install new outlet.
Insert plug all the way.
Unit is unplugged or not completely
plugged in.
Unit is off.
Turn unit on.
Batteries in remote are weak or dead.
Replace remote’s batteries.
EMERGENCY/REMOTE
switch is not set to REMOTE.
Slide EMERGENCY/REMOTE
to REMOTE.
The compressor does
not turn on.
(no cool air)
When the unit is first plugged in
and turned on, the compressor
will delay turn on for 3 minutes.
Wait 3 minutes for the unit to operate.
Wait 3 minutes for the unit to operate.
Clean or replace filter(s).
If the unit is turned off and then
immediately back on, the compressor
will delay for 3 minutes.
The air filter(s) is dirty or clogged.
Unit is located near a heat
source (heater, stove, etc.)
When locating unit for the first time,
make sure it is in a desirable location.
A door or window is open.
Shut door or window.
Remove obstacle.
There is an obstacle in front of
intake or indoor unit.
Thermostat is set too high.
Set thermostat lower.
This is normal.
Strange sounds occur.
During operation, especially after
turning it on or off, refrigerant flows
inside the unit.
Strange smells occur.
No remote operation.
The fan is bringing out the
smells of the carpet, walls, etc.
The smell should go away shortly.
Replace batteries.
Batteries are weak, dead or
inserted improperly.
Remote is out of range.
Move closer to unit.
Aim remote at sensor.
Remove obstruction.
Remote not aimed at sensor.
There is an obstruction between
unit and remote.
18
DSB-122L/122LH(
) 01.8.175:28PM
19
SPECIFICATIONS
MODEL
DSB-122L
DSB-122LH
Function
Cooling
Cooling / Heating (Heat pump)
Power Supply
AC 220-240V, 50Hz
Cooling Capacity (Heating Mode)
Operating Current (Heating Mode)
Power Consumption (Heating Mode)
Indoor Unit Dimensions
3,024 Kcal/h
5.7A
3,150 Kcal/h (3,402 Kcal/h)
7.0 A (6.3 A)
1,250W
1,500 W (1,410 W)
W 925 x H 285 x D 194 mm
Outdoor Unit Dimensions
W 666 x H 552 x D 264 mm
9.7 kg
Indoor
Net Weight
Outdoor
34 kg
Type
Flare
Connection
Gas
1/2" (12.7 mm)
1/4" (6.35 mm)
the piping
Liquid
Air Cleaning
Anti-bacteria Filter, Electrostatic Filter, Deodorizing Filter
Operating
Condition
Indoor side (Heating Mode)
Outdoor side (Heating Mode)
min 21˚C ~ max 32˚C (min 15˚C ~ max 27˚C)
min 21°C~max 52°C
min 21˚C ~ max 43˚C (min -5˚C ~ max 24˚C)
Design and specification are subject to change without notice for product improvemont.
S/N.: 3103907000
19
|