The Red, green,
Blue and Yellow
The Following important information:
THis gUARANTee is eXPRessLY MADe
iN LieU OF ALL OTHeR wARRANTies.
gUARANTees, iNCLUDiNg wiTHOUT
LiMiTATiONs, wARRANTies OF
30-Day Limited Double Your
Money Back guarantee for the
RCP1F
FeATURes AND
FUNCTiONs
seARCHiNg FOR YOUR
CODe
Keys will allow you to
access the Fast-Text
functions of your Tv
(NOTe: Fast-text is not
available on all Tv’s,
please consult the user
manual of your Tv for
complete operation)
a). This guarantee shall only be
applicable for retail purchasers of
iNFRAReD remote-controlled
Televisions manufactured for retail sale
in Australia or New Zealand
Press Power once to
turn on or off the Tv
if your Television does not respond to
the remote control after trying all of the
codes listed for your brand, or if your
brand is not listed at all, try searching
for your code.
MeRCHANTABiLiTY OR FiTNess OR ANY
PARTiCULAR PURPOse. iN NO eveNT
sHALL CResT eLeCTRONiCs Be LiABLe
FOR LiQUiDATeD, sPeCiAL, iNCiDeNTAL
OR CONseQUeNTiAL DAMAges. THe
gUARANTee PROviDeD BY CResT
eLeCTRONiCs wiLL CONTiNUe UNTiL
THe 31sT DAY OF DeCeMBeR 2006 OR
UNTiL CResT eLeCTRONiCs RevOKes
OR TeRMiNATes THis gUARANTee
wHiCH MAY Be DONe sOLeLY AT THe
DisCReTiON OF CResT eLeCTRONiCs
Crest electronics guarantees for a period
of 30 days from date of the original
purchase to the original consumer
purchaser.
Use setup for all
programming
sequences
Press 16:9 to change
theaspectratio/picture
format on your Tv.
(Not available for
Tv’s)
b). This guarantee does not apply to
any defective product (to which our
normal warranty applies) and any
product damaged by accident, misuse,
abuse, improperbatteryinstallation, fire,
water, lightning, or other acts of god.
This guarantee does not cover cartons,
carrying cases, batteries, broken or
marred cabinets, missing packaging or
missing instructions.
1.
2.
Turn on the Tv
Press and hold setup until the
red light , blinks twice and then
release setup.
That the RCP1F Universal Remote
Control will control any iNFRAReD
remote- controlled Tv manufactured for
retail sale in Australia.
The Teletext
keys are used to
access the teletext
features of your Tv.
(NOTe: Teletext is
not available on all
Tv’s, please consult
the user manual of
your Tv for complete
operation)
3.
4.
Press and release the MUTe and
OK keys simultaneously, the ReD
Light will flash twice and stay lit.
Press sLeeP to activate
the internal sleep
timer of your Tv (Not
available for Tv’s)
in the event that your RCP1F Universal
Remote Control will not control your
Tv, you must call our National Toll-Free
Number 1 800 812 261 and provide the
following information:
Aim the remote controls at the
Television and press and release
the CURsOR UP,
AND wiTHOUT FURTHeR NOTiCe.
if you have any questions about the
operation of your new RCP 1F Universal
Remote Control, you may call our
consumerhelp-lineforassistance.Before
calling, please read this manual carefully
to find an answer to your question.
The digit keys are
used to program the
remote control and
operate identically as
your original remote
control.
Continue pressing and releasing
the CURsOR UP key until your
Television turns off and stop
immediately.
0
9
c). This guarantee only applies to
the original purchaser of the RCP 1F
Universal Remote Control and does not
apply to any product after the initial 30
days from the date of retail purchase
to the original retail purchaser and this
offer is limited to one (1) refund per
family.
a) Date of Original Purchase.
b) Name of Retail Location.
PROgRAMMiNg YOUR Tv
5.
Press and release the OK key to
store the code.
The CResT Tv FULL Universal remote
is preprogrammed with codes for the
most popular remote controlled Tv’s
manufactured for use in Australia.
c) Manufacturer’s Name and Model
number of the device(s) that the RCP
1F Universal Remote Control will
not control. Upon the receipt of the
above information Crest electronics,
will determine at that time if we can
provide you with another Universal
Remote Control that will control your
Tv. if we can provide you with another
universal remote control that will
control all of your devices, we will ask
you to: Return to Crest electronics the
RCP 1F Universal Remote Control (in
good working condition) together
with the original packaging and all
materials, along with your proof
of retail purchase the, original
Use the Av Key to
change the video
inputs on your Tv.
(Not available on all
Tv’s)
TROUBLesHOOTiNg
if you cannot find a solution in this
manual,pleasecompletetheinformation
below.
PROBLeM:
The Red LeD does not
blink when you press
a key.
On the back side of the instruction sheet
you will find the set-Up code list. This
section lists the codes for your Tv by
brand name.
This guarantee specifically excludes:
• Non-remote operated Televisions,
• wired remote operated Televisions
Date of purchase: Day / Month / Year
Day / Month / Year
Use the -/-- key to
switchbetween1and2
digit channel entry.
sOLUTiON: Replace the batteries
with two (2) new AAA
batteries.
1.
Turn on the Tv
• All Televisions manufactured for sale
outside Australia
in Australia
NOTe: Please read steps 2 to 6
completely before proceeding.
Highlight or write down the codes
for the Tv you wish to program
before moving on to step 2.
Press Mute once to
turn sound off or on.
PROBLeM:
During programming, a
red light does not flash
twice after entering the
code.
RCP1F MANUAL
• Products that operate over 100kHz
(Bang & Olufsen)
Tel. 1800 812 261
Opening hours: 8.00am - 5.00pm
(Mon-Fri.)
OveRview
• Any peculiarity due to the original
manufacturer’s design such as
channel up and down on some
models of Tv
Use vOL+ (or vOL-)
to raise (or lower) the
sound
sOLUTiON: An invalid entry has
occurred. Check the
2.
3.
Press and hold setup until the
red light , blinks twice and then
release setup.
The Crest Tv Full remote control
with exclusive Dynamic Database
Technology is designed to be a
complete replacement remote
control for your Television.
For weB sUPPORT:
volume.
code to be entered and
try programming again.
www.Crestonline.biz
manufacturers’ remote and model
number of the Tv the RCP 1F Universal
Remote Control will not control.
.
• Only basic Tv functions are applicable
Tv: volume up, volume down, channel
up, channel down, mute, power, digits
0-9, Av, Menu and Navigation Keys
Locate the code for your device
in Manufacturer’s Codes on the
back of this user guide. Brands are
listed in alphabetical order.
PROBLeM:
The red light blinks when
you press a key, but the
Tv does not respond.
The remote control requires
Press the Return key
to switch between
the channel selected
and the last channel
viewed.
installing two (2) new AAA batteries
(not-included) and some easy
programming to control your Tv.
Upon receipt of your RCP 1F Universal
Remote Control and original Tv remote
control , Crest electronics will send you
another remote control to control your
devices.
sOLUTiON: Make sure the remote
control is aimed at your
Tv and is not farther
4.
5.
Using the DigiT keys enter in the
first 4 digit code listed for your
brand of Tv. The red light will flash
twice.
NB: The above “basic functions” are
only applicable where the original
remote had identical function
For best results, please read and
perform all instructions listed here.
Also, keep this guide for future
reference.
.
than 15 feet away.
• Commercial use of product (eg. Retail
outlets, hotels/motels, schools etc.)
Use CH+ (or CH-) to
select the next higher
(or lower) channel.
PROBLeM:
The remote control does
not control the Tv or
the commands are not
working properly.
Aim the remote control at your
Tv and press Power once. The
device should turn off. if the Tv
does not respond, repeat steps
2 to 5, trying each code listed for
your brand until you find one that
works. if it still does not work, try
searching For Your Code.
if Crest electronics determines that
it cannot provide you with a remote
control that will control all of your
devices you will be required to:
iNsTALLiNg BATTeRies
The original place of purchase is not
responsible for the Double Money Back
refund. Crest electronics is the sole
authorised agent for this refund. Any
other exchange must be obtained from
the original place of purchase to normal
company policy.
1.
Pull back the remote control’s
battery cover and remove it.
sOLUTiON: Try all listed codes for
the Tv brand being
2.
insert the two (2) AAA batteries
according to the + and - marks in
the battery case.
Upon receipt of your RCP 1F Universal
Remote Control and, Crest electronics
will send you a cheque for double
the retail amount paid by you for
the purchase of the RCP 1F Universal
Remote Control.
set up. Make sure they
can be operated with an
infrared remote control.
Use the CURsOR and
OK key’s to navigate
and select items in the
on screen menu.
6.
For future reference, write your
device code in the appropriate
boxes below:
OK
3.
4.
Push the battery cover back into
place.
Tv Code:
Test the unit by pressing the
Power key. if batteries are
inserted correctly, the Red light
will light.
Use the MeNU key to
access the on screen
menu of your Tv
MENU
NOTe: when the batteries need to be
replaced, the remote control will stop
working. Replace the old batteries and the
unit will be restored to its full functionality,
complete with your favorite settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
|