Humminbird Fish Finder 300 series User Manual

363 GPS Chartplotter

Operations Manual

531448-1_B

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

How Sonar Works

DualBeam PLUS^TMSonar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

How GPS and Cartography Work

What’s On the Display

Views

Sonar View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Understanding Sonar History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Real Time Sonar (RTS®) Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Freeze Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Bottom Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Sonar Zoom View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

200/83 kHz Split Sonar View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Big Digits View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Circular Flasher View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Bird's Eye View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Chart View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Combo View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

View Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Viewing Cartography

Introduction to Navigation

Waypoints, Routes and Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Save, Edit or Delete a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Navigate to a Waypoint or Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Add a Waypoint Target or Trolling Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Save, Edit or Delete a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Save or Clear a Current Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Edit, Delete or Hide Saved Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Key Functions

POWER/LIGHT Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

VIEW Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

INFO Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

MENU Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4-WAY Cursor Control Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

MARK Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

GOTO Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ZOOM (+/-) Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

EXIT Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Powering Up the Unit

The Menu System

Start-Up Options Menu

Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Simulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Self Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Accessory Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

GPS Diagnostic View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Sonar X-Press^TMMenu (Sonar views only)

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher views only). . . . . . . . . 36

Lower Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Chart Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Bottom Range (Sonar Zoom view only when Bottom Lock is On) . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Bottom Lock (Sonar Zoom view only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Cancel Navigation (only when navigating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Navigation X-Press^TMMenu (Navigation views only)

Waypoint [Name] (Only with an active cursor on a waypoint). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Cursor To Waypoint (Chart or Combo view only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Save Current Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Clear Current Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Save Current Route (only when navigating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Skip Next Waypoint (only when navigating). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Cancel Navigation (only when navigating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Remove Target (only if Target is Active) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Remove Grid (only if Grid is Active) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Sonar Window (Combo view only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Waypoint [Name] (Most recently-created waypoint) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Sonar Menu Tab

Beam Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Fish ID+^TM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Fish ID Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Real Time Sonar (RTS®) Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Zoom Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

83 kHz Sensitivity (Advanced). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Depth Lines (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Surface Clutter (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Noise Filter (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Max Depth (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Water Type (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Navigation Menu Tab

Current Track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Saved Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Waypoints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chart Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

North Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Grid Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Trackpoint Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Track Min Distance (Advanced). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Map Datum (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Course Projection Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Delete All Nav Data (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Chart Menu Tab

Chart Detail Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Map Borders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Lat/Lon Grid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Set Simulation Position (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Set Map Offset (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Clear Map Offset (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Alarms Menu Tab

Depth Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Fish ID Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Low Battery Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Temp Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Off Course Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Arrival Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Drift Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Alarm Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Setup Menu Tab

Units - Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Units - Temp (International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Units - Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Units - Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

User Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Language (International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Triplog Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Restore Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Select Readouts (Advanced, Sonar view only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

_{Download from Www.Somanuals.co}v_{m. All Manuals Search And Download.}

Table of Contents

Depth Offset (Advanced). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Temp Offset (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Speed Calibration (Advanced, with Temp/Speed only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Local Time Zone (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Daylight Saving Time (Advanced). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Position Format (Advanced) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Time Format (Advanced, International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Date Format (Advanced, International only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

NMEA Output (Advanced). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Sonar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Views Menu Tab

Troubleshooting

300 Series^TMDoesn’t Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

300 Series^TMDefaults to Simulator with a Transducer Attached . . . . . . . . . . . . . . . . . . . . . . 87

Display Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Finding the Cause of Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Specifications

Glossary

Sonar Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

GPS & Navigation Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Contact Humminbird®

109

NOTE: Entries in this Table of Contents which list (International only) are only available on

products sold outside of the U.S. by our authorized International Distributors. To obtain a list

of authorized International Distributors, please visit our website at www.humminbird.com or

contact our Customer Resource Center at 1-800-633-1468 to locate the distributor nearest you.

NOTE: Entries in this Table of Contents which list (with Temp/Speed) require the purchase of

a separate accessory. You can visit our website at www.humminbird.com to order this

accessory online or contact our Customer Resource Center at 1-800-633-1468.

Download from Www.Somanuals.com. All Manuals Search And Download.

How Sonar Works

Sonar technology is based on sound waves. The 300 Series^TMFishing System uses sonar

to locate and define structure, bottom contour and composition, as well as depth

directly below the transducer.

Your 300 Series^TMFishing System sends a sound wave signal and determines distance

by measuring the time between the transmission of the sound wave and when the

sound wave is reflected off of an object; it then uses the reflected signal to interpret

location, size, and composition of an object.

Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft

(70 m) and back again in less than 1/4 of a second. It is unlikely that your boat can

"outrun" this sonar signal.

SONAR is an acronym for SOund and NAvigation

Ranging. Sonar utilizes precision sound pulses or

"pings" which are emitted into the water in a

teardrop-shaped beam.

The sound pulses "echo" back from objects in the

water such as the bottom, fish and other

submerged objects. The returned echoes are

displayed on the LCD screen. Each time a new

echo is received, the old echoes are moved across

the LCD, creating a scrolling effect.

When all the echoes are viewed side by side, an

easy to interpret "graph" of the bottom, fish and

structure appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

The sound pulses are transmitted at various

frequencies depending on the application. Very

high frequencies (455 kHz) are used for greatest

definition but the operating depth is limited.

High frequencies (200 kHz) are commonly used

on consumer sonar and provide a good balance

between depth performance and resolution. Low

frequencies (83 kHz) are typically used to achieve

greater depth capability.

The power output is the amount of energy

generated by the sonar transmitter. It is commonly

measured using two methods:

• Root Mean Square (RMS) measures power output

over the entire transmit cycle.

• Peak to Peak measures power output at the

highest points.

The benefits of increased power output are the

ability to detect smaller targets at greater distances,

ability to overcome noise, better high speed

performance and enhanced depth capability.

Download from Www.Somanuals.com. All Manuals Search And Download.

DualBeam PLUS^TMSonar

Your 300 Series^TMFishing System uses a 200/83

kHz DualBeam PLUS^TMsonar system with a

wide (60°) area of coverage. DualBeam PLUS^TM

sonar has a narrowly focused 20° center beam,

surrounded by a second beam of 60°,

expanding your coverage to an area equal to

your depth. In 20 feet of water, the wider beam

covers an area 20 feet wide. The 20° center

beam is focused on the bottom, to show you

structure, weeds and cover. The 60° wide beam

is hunting for fish in the wide coverage area.

DualBeam PLUS^TMsonar returns can be blended

together, viewed separately or compared side-

by-side. DualBeam PLUS^TMis ideal for a wide

range of conditions - from shallow to very deep

water in both fresh and salt water. Depth

capability is affected by such factors as boat

speed, wave action, bottom hardness, water

conditions and transducer installation.

How GPS and Cartography Work

Your 300 Series^TMFishing System also supports GPS and chartplotting, and uses GPS and

sonar to determine your position, display it on a grid, and provide detailed underwater

information. The Global Positioning System (GPS) is a satellite navigation system

designed and maintained by the U.S. Department of Defense. GPS was originally

intended for military use; however, civilians may also take advantage of its highly

accurate position capabilities, typically within +/- 10 meters, depending on conditions.

This means that 95% of the time, the GPS receiver will read a location within 10 meters

of your actual position. Your GPS Receiver also uses information from WAAS (the Wide

Area Augmentation System), EGNOS (the European Geostationary Navigation Overlay

Service), and MSAS (the MTSAT Satellite Augmentation System) satellites if they are

available in your area.

Download from Www.Somanuals.com. All Manuals Search And Download.

GPS uses a constellation of 24 satellites that continually

send radio signals to the earth. Your present position is

determined by receiving signals from up to 16 satellites

and measuring the distance from the satellites.

All satellites broadcast a uniquely coded signal once per

second at exactly the same time. The GPS receiver on

your boat receives signals from satellites that are visible

to it. Based on time differences between each received

signal, the GPS receiver determines its distance to each

satellite. With distances known, the GPS receiver

mathematically triangulates its own position. With

once per second updates, the GPS receiver then

calculates its velocity and bearing.

The GPS Receiver included with your 300 Series^TMFishing System, allows you to combine

easy-to-use FishingGPS^TMchartplotter and navigation capabilities with advanced

fishfinding. The following GPS functionality is currently supported by the 300 Series^TM

Fishing System:

• View current position

• View current track (breadcrumb trail)

• View precision speed and heading from your GPS receiver

• Save tracks, waypoints and routes

• Travel a route and navigate from one waypoint to the next.

Your unit also comes with a built-in Uni-Map^TMwith a more detailed map of North

America (Domestic models) or a more detailed map of Europe and Southeast Asia,

including Australia and New Zealand (International models).

Your 300 Series^TMuses the GPS Receiver to determine the position of the boat

automatically, and uses the zoom level settings on a particular view to select the best

chart to display. See Viewing Cartography for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

What’s On the Display

The 300 Series^TMcan display a variety of useful information about the area under and

Depth - water depth; can be set to alarm when the

Cursor - available in Freeze Frame and can

depth of a sonar return and bottom depth

water becomes too shallow.

Speed - if a Temp/Speed accessory or GPS Receiver

is attached, the 300 Series^TMcan display the speed

of the boat, and can keep a Triplog of nautical or

statute miles traveled.

Temperature - water surface temperature.

Timer - elapsed time with Temp/Speed Accessory

or GPS Receiver.

Distance - distance traveled with Temp/Speed

Accessory or GPS Receiver.

Average Speed - average speed reading with

Temp/Speed Accessory or GPS Receiver.

Bait Ball

Hard Bottom

Rocky Bottom

Second Sonar Return - when the sonar signal

bounces between the bottom and the surface of

the water and back again. Use the appearance of

the second return to determine bottom

hardness. Hard bottoms will show a strong

second return, while soft bottoms will show a

very weak one or none at all.

Cursor Dialog Box - indicates cursor depth on

Longitude of the cursor position is shown,

be marked at the cursor position for later

NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either

only the information from the GPS receiver will be displayed on the view.

Download from Www.Somanuals.com. All Manuals Search And Download.

adjacent to your boat, including the following items:

be positioned in the Sonar View to provide

below the cursor.

Structure - where fish may be hiding.

200 kHz, Narrow Beam Shaded Fish Symbol

83 kHz, Wide Beam Hollow Fish Symbol

Thermoclines - layers of water with different

temperatures that appear at different depths and

different times of the year. A thermocline typically

appears as a continuous band of many gray levels

moving across the display at the same depth.

Fish - fish are displayed as arches and/or fish

icons, and the unit can be set to alarm when a fish

of a certain size is detected. When a target is

detected and Fish ID+^TMis on, a Fish ID+^TMsymbol

with depth is displayed. The size of the symbol

shows the intensity of the sonar return. The unit

will clearly show schools of Bait Fish as "clouds"

of different shapes and sizes, depending on the

number of fish and boat speed.

Soft Bottom

RTS® (Real Time Sonar) Window

the display and the depth of the bottom directly below the cursor. In addition, the Latitude and

the distance to travel to the cursor position and the bearing to the cursor position. A waypoint can

retrieval and use.

device is connected to the 300 Series^TMFishing System. If both devices are connected, then

Download from Www.Somanuals.com. All Manuals Search And Download.

Views

The views available on your 300 Series^TMFishing System are:

Sonar views:

Navigation views:

• Sonar View

• Zoom View

• Bird’s Eye View

• Chart View

• 200/83 kHz Split Sonar View

• Big Digits View

• Combo View.

• Circular Flasher View.

NOTE: When you change any menu settings that affect the sonar, the view will update

immediately (i.e. you don’t have to exit the menu to apply the change to the screen). For

instance, by switching between "Inverse" and "Structure ID®" from the X-Press^TMmenu, it is

possible to quickly alternate between the two viewing methods.

Sonar View is the default view. When the VIEW key is pressed, the display cycles through

the available views. When the EXIT key is pressed, the display cycles through the

available views in reverse order. Any view can be hidden or displayed as part of the view

rotation using the Views Menu tab.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sonar View

Sonar View presents a historical log of sonar returns. Depth is always displayed.

Readouts for temperature and speed are automatically displayed if the appropriate

accessory is connected. The most recent sonar returns are charted on the right side of

the window; as new information is received, the older information is moved across the

display to the left. A Digital Depth Readout is displayed in the upper left corner. A scale

with Upper and Lower Depth Range readouts appears along the right edge of the Sonar

View. The scale indicates the distance from the surface of the water to a depth range

sufficient to show the bottom. Depth Range is automatically selected to keep the bottom

visible on the display, although you can adjust it manually as well (see Sonar

X-Press^TMMenu). Five additional Digital Readouts display information from optional-

purchase accessories. These information boxes can be customized to show only the

information desired (see Setup Menu Tab, Select Readouts).

Sonar View

Upper Depth

Range

Depth

RTS® Window

Temperature

Cursor

Triplog

Sonar History

Window

Cursor

Dialog Box

Lower Depth

Range

NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the

bottom. This usually happens if the water is too deep, the transducer is out of the water, the

boat is moving too fast, or for any other reason that the unit can’t accurately receive

continuous data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Understanding Sonar History

It is important to understand the significance of

the 300 Series^TMFishing System display. The

display does NOT show a literal 3-dimensional

representation of what is under the water. Each

vertical band of data received by the control head

and plotted on the display represents something

that was detected by a sonar return at a particular

time. As both the boat and the targets (fish) may be

moving, the returns are only showing a particular

segment of time when objects were detected, not

exactly where those objects are in relation to other

objects shown on the display.

Real Time Sonar (RTS®) Window

A Real Time Sonar (RTS®) Window appears on the right side of the display in the Sonar

View only. The RTS® Window always updates at the fastest rate possible for depth

conditions and shows only the returns from the bottom, structure and fish that are

within the transducer beam. The RTS® Window plots the depth and intensity of a sonar

return. (See Sonar Menu: RTS® Window) .

The Narrow RTS® Window

indicates the sonar intensity

through the use of grayscale.

The grayscale used matches

the bottom view grayscale

setting used in the sonar

history window (i.e. Inverse,

StructureID®, WhiteLine®,

Bottom Black). The depth of

the sonar return is indicated

by the vertical placement of

the return on the display

depth scale.

The Wide RTS® Window in-

dicates the sonar intensity

through the use of a bar

graph. The length of the

plotted return provides an

indication of whether the

return is weak or strong. The

depth of the sonar return is

indicated by the vertical

placement of the return on

the display depth scale. The

Wide RTS® Window does not

make use of grayscale.

Download from Www.Somanuals.com. All Manuals Search And Download.

Freeze Frame

Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze the screen

and a cursor will be displayed on the screen. The cursor can be positioned on the display

using the 4-WAY Cursor Control key to determine the depth of any sonar return. The

RTS® Window continues to update in Freeze Frame. In addition, see the effects of menu

setting changes with Instant Image Update. Pressing EXIT will exit Freeze Frame and the

display will start to scroll. Freeze Frame is available in the Sonar, Sonar Zoom, and

200/83 kHz Split Sonar Views.

Bottom Presentation

As the boat moves, the unit charts the changes in depth on the display to create a profile

of the Bottom Contour. The type of bottom can be determined from the return charted

on the display. A Hard Bottom such as compacted sediment or flat rock appears as a

thinner line across the display. A Soft Bottom such as mud or sand appears as a thicker

line across the display. Rocky Bottoms have a broken, random appearance.

Bottom Contour Profile with RTS® Window.

Temp/Speed Accessory is optional.

Hard Bottom

Soft Bottom

Rocky Bottom

The sonar returns from the bottom, structure and fish can be represented as either

Inverse (default), WhiteLine®, Structure ID®, or Bottom Black. See Sonar X-Press^TMMenu:

Bottom View for details on how to set the bottom view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inverse is a method where weak returns are shown

with dark pixels and strong returns with lighter pixels.

This has the benefit of ensuring that weak signals will

be clearly visible on the display.

Structure ID® represents weak returns as light pixels

and strong returns as dark pixels. This has the benefit

of ensuring that strong returns will be clearly visible

on the display.

WhiteLine® highlights the strongest sonar returns in

white, resulting in a distinctive outline. This has the

benefit of clearly defining the bottom on the display.

Bottom Black displays all pixels below the bottom

contour as black, regardless of signal strength. This has

the benefit of providing a high contrast between the

bottom and other sonar returns on the display. Any

targets such as fish, structure and thermoclines will be

shown using the Structure ID® method.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sonar Zoom View

Sonar Zoom View increases the displayed resolution to separate sonar returns that

are very close together, such as those caused by fish suspended close to the bottom

or within structure. In Zoom View, the display is split to show a narrow slice of the

full range view on the right and the zoomed view on the left. The full range view on

the right also contains the Zoom Preview Box that shows what part of the full range

view is shown in zoom view on the left; the Zoom Preview Box tracks the bottom in

the full range view.

As the depth changes, the zoomed view updates automatically to display a magnified

image of the bottom. The Zoom Preview Box shows where the zoomed view is in

relation to the full range view. The Zoom Level, or magnification, is displayed in the

lower left corner and can be changed to suit conditions (see Sonar X-Press^TMMenu: Zoom

Level). Upper and Lower Zoom Depth Range numbers indicate the depth of the water

which is being viewed.

Digital depth is displayed in the upper left hand corner. The digital readouts in the Sonar

Zoom View cannot be customized; therefore, information such as water temperature

and voltage are unavailable in the Sonar Zoom View.

Sonar Zoom View

Upper Depth

Range, Full

Range View

Depth

Upper Depth

Range, Zoom View

Full Range

View

Zoomed

View

Zoom

Preview Box

Zoom Level

Lower Depth

Range, Full

Range View

Lower Depth Range,

Zoom View

Download from Www.Somanuals.com. All Manuals Search And Download.

200/83 kHz Split Sonar View

Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of

the screen and displays sonar returns from the 200 kHz narrow beam on the right side

of the screen. Depth is always displayed in the upper left hand corner. You can use the

Split Sonar View to make side by side comparisons between the sonar returns from the

83 kHz wide beam and the 200 kHz narrow beam.

The digital readouts in the Split Sonar View cannot be customized; therefore,

information such as water temperature and voltage are unavailable in the Split

Sonar View.

200/83 kHz Split Sonar View

Upper Depth

Range

Depth

200 kHz

Sonar History

Window

83 kHz

Sonar History

Window

Lower Depth Range

Download from Www.Somanuals.com. All Manuals Search And Download.

Big Digits View

Big Digits View provides digital data in a large, easy-to-see format. Depth is always

displayed. Readouts for temperature, speed and Triplog information are displayed

automatically if the appropriate accessory is connected to the 300 Series^TMFishing

System. The Triplog shows distance traveled, average speed, and time elapsed since the

Triplog was last reset. The digital readouts in the Big Digits View cannot be customized.

Big Digits View

Timer shows the time

elapsed since Triplog

was last reset

Depth

Distance is the distance

traveled since the Triplog

was last reset

Temperature

Speed

Voltage - the battery

voltage.

Average Speed shows

the speed since the

Triplog was last reset

Circular Flasher View

Circular Flasher View displays Real Time Sonar (RTS®) data in the traditional flasher

format. Depth and temperature are always displayed. The digital readouts in the Flasher

View cannot be customized.

Download from Www.Somanuals.com. All Manuals Search And Download.

Bird’s Eye View

Bird's Eye View - This view shows a 3-D, perspective view of the track and the chart’s land

contour from a point above and behind the boat (the eye point). As the boat turns, the

eye point moves to follow the boat.

When you press the 4-WAY Cursor key in the Bird’s Eye View, the position of the eye

point will shift. This allows you to move and turn the eye point so that you can look

off to the sides, or even behind the boat. Pressing the RIGHT or LEFT arrow keys on

the 4-WAY Cursor key turns the eye point right or left, while pressing the UP arrow

key moves the eye point forward, and pressing the DOWN arrow key moves the eye

point backward.

Pressing the EXIT key moves the eye point back to its original position behind and

above the boat.

Bird’s Eye View

Depth

Latitude and

Longitude

Position of Boat

Land Contours

Boat Icon

Speed of Boat

Bearing of Boat

with Respect to

True North

Water Surface

Temperature

Download from Www.Somanuals.com. All Manuals Search And Download.

Chart View

Chart View - This view shows cartography from the built-in Uni-Map^TMfor the area

surrounding your current position. The current track (also known as the position history

or breadcrumb trail) showing where the boat has been, along with saved tracks,

waypoints, and the current route (when navigating), are overlaid on the chart. You can

use the 4-WAY Cursor Control key to shift/pan the chart to another area. You can use the

ZOOM (+/-) keys to zoom in and out. You can use the INFO key to get information on the

chart objects near the cursor.

Chart View without Active Cursor

Cartography

Depth

Map Scale

Speed Of Boat

Bearing of Boat

with Respect to

True North

Water Surface

Temperature

Chart View with Active Cursor

Cartography

Depth

Map Scale

Active Cursor

Latitude and

Longitude

Position of

Cursor

Bearing of Boat

with Respect to

True North

Distance to

the Cursor

and Bearing

to Cursor

Download from Www.Somanuals.com. All Manuals Search And Download.

Combo View

Combo View - This view is displayed as a split screen, with Chart View on the left

and Sonar View on the right side of the screen. The width of the sonar window can

be changed.

Combo View

Depth

Sonar Window

Map Scale

Cartography

Bearing of Boat

Water Surface

with Respect to

Temperature

True North

Speed of Boat

View Orientation

Both Chart and Combo views allow you to choose the orientation of the view. When

North-Up orientation is selected, True North is shown at the top of the display. In

other words, objects located to the north of the boat are drawn above the boat.

When Course-Up orientation is selected, the direction of motion of the boat is

shown at the top of the display. In other words, objects ahead of the boat are drawn

above the boat. In both orientations, the view pans automatically, so that the boat is

always centered on the display. When the boat is stationary, it is drawn as a circle.

When the boat is in motion, it takes on a boat shape, pointed in the direction of

motion (always Up in the Course-Up orientation).

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Cartography

In the Chart or Combo Views there are several cartography-related functions that you

can access using various keys.

Panning: Use the 4-WAY Cursor keys to move the

chart around on the display in the direction of the

key being pressed. When you do this, a bull's eye

cursor is drawn at the center of the screen and

is linked to the boat by a gray line, even if the boat

is off the screen. At the same time, the

temperature and speed boxes in the lower left

corner are replaced with the distance and bearing

from the boat to the cursor position and the

latitude/longitude coordinates of the cursor.

Chart View with Cursor Present

Zooming: Use the Plus (+) key to Zoom In and the Minus (-) key to Zoom Out showing

the cartography at different scales. The scale is indicated on the left side of the display.

If you zoom in beyond the available chart data, the display will go into Overzoom mode

whereby the last available chart data is amplified to reflect the scale selected. If you

zoom in so far that no cartography is available, a lat/long grid will be drawn instead.

Chart Info: Use the INFO key to get detailed information about the chart. If the cursor is

active, you will see information about the chart objects located near the cursor.

Introduction to Navigation

Use the 300 Series^TMFishing System to establish waypoints at areas of interest and to

navigate to those waypoints via a savable route (representing the shortest intended

distance between waypoints). You can also view and save tracks, which represent the

actual path of the boat.

Download from Www.Somanuals.com. All Manuals Search And Download.

Waypoints, Routes and Tracks

Waypoints are stored positions that allow you to mark areas of interest or navigation

points. Your 300 Series^TMFishing System can store up to 2000 waypoints.

Waypoints, Routes and Tracks

Depth

BRG: Bearing

Waypoint

to Waypoint

XTE: Cross

Track Error.

Distance of

Boat from

Route

Bearing of

Boat with

Respect to

True North

Route

DTG: Distance

to Go to

Waypoint

Track

Water Surface

Temperature

Speed of Boat

Routes link two or more waypoints together to create a path for navigation, and are

used in trip planning. You can link individual waypoints together by using the GOTO key.

A route represents your intended navigation and shows the shortest path from each

waypoint to the next. As you travel a route, staying on the route line is the most efficient

way to get to your destination, although you should always look out for obstacles not

shown on the chart. Your 300 Series^TMFishing System can store up to 50 routes that can

each contain up to 50 waypoints.

Tracks consist of detailed position history, and are displayed as a breadcrumb trail of

trackpoints. The Current Track shows the position history since the unit was powered up

(maximum of 20,000 trackpoints displayed). You can clear the Current Track or save it at

any time. Your 300 Series^TMFishing System can store up to 25 saved tracks, each

containing 20,000 trackpoints. The current track represents your actual path so far.

Download from Www.Somanuals.com. All Manuals Search And Download.

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK key to save the

current position of the boat as a waypoint.

Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key

to designate the position you want to save as a waypoint. Then press the MARK key to

save the marked position as a waypoint.

Save a position from the sonar history: On any Sonar view, use the Cursor key to point

to a feature in the sonar history (also called the Sonar Saver feature). Press the MARK key

to create a waypoint at the location where that sonar reading was taken. The new

waypoint will also record the depth at that location.

NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is

automatically assigned. You can edit the waypoint information later to give it a different

name and select an icon to represent it (see Waypoint submenu on the Navigation Main

Menu Tab).

Display the Waypoints Submenu: From any view, press the MENU key twice to display

the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab.

Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.

Program a specific position as a waypoint: To create a waypoint that is NOT your current

position, from the Waypoints submenu, select the Create option and press the RIGHT

Cursor key. Use the Cursor keys to program a waypoint name, latitude, longitude, and

icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor

key to display a list of saved waypoints. Select the waypoint you want to edit and press

the RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and

the UP and DOWN Cursor keys to changes values once you are in a field. In the Waypoint

Name, Latitude and Longitude fields, use the UP and DOWN Cursor keys to change the

letter or number. All upper and lower case letters are available, as well as digits 0-9 and

some punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor

keys to change the icon used to represent the waypoint on the Combo and Chart Views.

You can exit these fields with the LEFT and RIGHT Cursor keys or by pressing the EXIT key.

Select Save and press the RIGHT Cursor key to save your changes.

_{Download from Www.Somanuals.co}2_m0_{. All Manuals Search And Download.}

To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor

keys to select a sort order:

• Name shows the waypoints alphabetically

• Time shows the most recently-created waypoint first

• Distance shows the closest waypoint first.

Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT

Cursor key to display a list of waypoints. Select the waypoint you want to delete, then

press the RIGHT Cursor key. You will be asked to confirm deletion before the waypoint is

actually deleted.

Navigate to a Waypoint or Position

Navigate to the cursor position: From the Chart or Combo view, use the Cursor key to

select a position or waypoint to which you want to navigate. Press the GOTO key.

Navigation will begin immediately.

Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to

which you would like to navigate from the waypoint list and press the RIGHT Cursor key

to select it.

NOTE: By repeating the previous instructions, you can add more waypoints to create a longer

multi-segment route.

Skipping a waypoint: From the Navigation X-Press^TMmenu, select Skip Next Waypoint

and press the RIGHT Cursor key. If there is not another waypoint to skip to, navigation

will be cancelled.

Cancel navigation: From the Navigation X-Press^TMmenu, select Cancel Navigation and

press the RIGHT Cursor key. Canceling navigation removes the route and any waypoints

created using the GOTO key, but does not remove any saved routes from memory. You

will be prompted to save the current route when you cancel navigation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Add a Waypoint Target or Trolling Grid

Waypoint Target

Add or Remove a Waypoint Target: From the

Waypoints submenu, select Target and press the

RIGHT Cursor key to display a list of waypoints. Select

the waypoint you want to target. A target consisting

of concentric circles centered on the selected

waypoint will appear on all of the navigation views;

the target shows various distance ranges from the

targeted waypoint. To remove the target, choose

Remove Target from the Navigation X-Press^TMmenu.

Chart View with Target

Add or Remove a Trolling Grid: From the Waypoints

submenu, select Grid and press the RIGHT Cursor key

to display a list of waypoints. Select the waypoint to

which you want to add the grid. The trolling grid will

appear on all of the navigation views, and can be

used as a guide when trolling around a waypoint.

The grid can be rotated to any desired heading using

Grid Rotation from the Navigation Main menu. To

remove the trolling grid, choose Remove Grid from

the Navigation X-Press^TMmenu.

Waypoint

Trolling

Grid

Chart View with Grid

NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target

or a grid to a new waypoint, the original waypoint will lose its target or grid.

NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the

trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming

in or out will decrease or increase the spacing, respectively.

Download from Www.Somanuals.com. All Manuals Search And Download.

Save, Edit or Delete a Route

Save the current route: While you are navigating, the current route can be saved. From

the Navigation X-Press^TMmenu, select Save Current Route and press the RIGHT Cursor

key. Navigation will continue.

Display the Routes submenu: From any view, press the MENU key twice to display the

Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select

Routes and press the RIGHT Cursor key to display the Routes submenu.

Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key.

A Route Edit screen will be displayed with an empty route. You can name the route, add

waypoints to the route from the list of all waypoints, and order the waypoints in the

route using the Cursor keys.

Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor

key. A Route Edit screen will be displayed. Select the route you wish to edit and press

the RIGHT Cursor key. Re-name the route or change, delete or re-order the waypoints

used in the route.

Delete a saved route: From the Routes submenu, select Delete and press the RIGHT

Cursor key. Select the route you wish to delete and press the RIGHT Cursor key. You

will be asked to confirm your choice by pressing the RIGHT Cursor key again before

the route is deleted.

Travel a saved route: From the Routes submenu, select Travel and press the RIGHT

Cursor key. A list of saved routes will appear. Select the route you wish to travel and press

the RIGHT Cursor key to make this route the current route and begin navigation. You

may also travel the route in either forward or reverse order.

Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A list

of saved routes will appear. Select the route for which you want information, and press

the RIGHT Cursor key. The list of waypoints in the route will be shown, with the distance

and bearing from each waypoint to the next, as well as the distance and bearing from

the current position to the first waypoint in the route.

Download from Www.Somanuals.com. All Manuals Search And Download.

Save or Clear a Current Track

Save the current track: From the Navigation X-Press^TMmenu, select Save Current Track

and press the RIGHT Cursor key. The track will remain on the display, but will change

from black to gray. To remove the track completely from the display, see Edit, Delete or

Hide Saved Tracks.

NOTE: When you save a track, a name is automatically assigned. The track name consists of

a date/time stamp, but can be re-named later (see Edit a Saved Track).

Clear the current track: From the Navigation X-Press^TMmenu, select Clear Current

Track and press the RIGHT Cursor key. The track will be removed from the display and

discarded.

Edit, Delete or Hide Saved Tracks

Display the Tracks Submenu: From any view, press the MENU key twice to display the

Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select

Tracks and press the RIGHT Cursor key to display the Tracks submenu.

Edit a saved track: From the Tracks submenu, select Edit and press the RIGHT Cursor key

to display the list of saved tracks. Select the track you want to edit and press the RIGHT

Cursor key. When the Edit Track dialog box appears, use the Cursor keys to move

between fields. In the Track Name field, the UP and DOWN Cursor keys change the letter

or number. All upper and lower case letters are available, as well as digits 0-9 and some

punctuation characters. You can exit the Track Name field with the LEFT and RIGHT

Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key to

save your changes.

Delete a saved track: From the Tracks submenu, select Delete and press the RIGHT

Cursor key to display the list of saved tracks. Select the track you want to delete and

press the RIGHT Cursor key. You will be asked to confirm deletion before the track is

actually deleted.

Hide or display a saved track: From the Tracks submenu, select Visibility and press the

RIGHT Cursor key to display the list of saved tracks. Select the track you want to hide or

display and use the Cursor keys to select Hidden or Visible. Press the EXIT key to return

to the Tracks submenu.

_{Download from Www.Somanuals.co}2_m4_{. All Manuals Search And Download.}

Key Functions

Your 300 Series^TMFishing System user interface consists of a set of easy-to-use keys that

work with various on-screen views and menus to give you flexibility and control over

your fishing experience.

POWER/LIGHT Key

The POWER/LIGHT key is used to turn the 300 Series^TMFishing System on

and off, and also to adjust the backlight and contrast of the display. Press

the POWER/LIGHT key to turn the unit on. The Title screen is then

displayed until the 300 Series^TMFishing System begins sonar operation.

Your 300 Series^TMFishing System will start up with the backlight

on and will automatically turn it off to conserve power. To turn

the backlight on for night fishing, or to adjust the display

contrast, press the POWER/LIGHT key to access the Light and

Contrast menu. Use the 4-WAY Cursor key to select Light or

Contrast and then use the LEFT or RIGHT Cursor key to change

the settings. Press EXIT to exit the Light and Contrast menu.

Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will

appear telling you how many seconds there are until shutdown occurs. Your 300 Series^TM

Fishing System should always be turned off using the POWER/LIGHT key. This will

ensure that shutdown occurs properly and any menu settings will be saved.

VIEW Key

The VIEW key is used to cycle through all available views. Press the VIEW

key to advance to the next view. Repeatedly pressing VIEW cycles

through all views available. Views can be hidden to optimize the system

to your fishing requirements (see Views Menu Tab).

INFO Key

Info - Press the INFO key while in Bird's Eye, Chart or Combo View to

display information about objects that are nearest to an active cursor.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU Key

The MENU key is used to access the menu system.

Start-Up Options Menu - Press the MENU key during the power up sequence to view the

Start-Up Options menu.

X-Press^TMMenu - Press the MENU key once for the X-Press^TMMenu. The X-Press^TMmenu

allows you to access frequently-used settings without having to navigate through the

whole menu system. When the X-Press^TMmenu is displayed, you can use the UP or

DOWN Cursor keys to move to a particular menu choice. As soon as you alter a

parameter (using the RIGHT or LEFT Cursor keys) the X-Press^TMmenu will collapse

temporarily, and the screen will update if it is affected by your menu setting change,

allowing you to see the effects of your action immediately. Reactivate the X-Press^TM

Menu by using the UP or DOWN Cursor keys.

Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main

Menu System is organized under tabbed headings to help you find a specific menu

item quickly: Alarms, Sonar, Navigation, Chart, Setup, and Views tabs are part of your

tabbed Main Menu System. Use the LEFT or RIGHT 4-WAY Cursor Control key to select

a tab; then use the DOWN or UP key to select the menu item, and the LEFT or RIGHT

key to alter a menu setting.

4-WAY Cursor Control Key

The 4-Way Cursor Control Key has multiple functions, depending on the

situation:

• Use the DOWN or UP arrow keys to select a menu choice from the menu list,

then use the LEFT or RIGHT arrow keys to change a menu setting.

NOTE: Menu choices are implemented and saved immediately - no further action is required.

• In all Sonar views but the Big Digits view, pressing any 4-WAY Cursor Control

key will activate Freeze Frame and will then allow you to position the cursor

on the display.

_{Download from Www.Somanuals.co}2_m6_{. All Manuals Search And Download.}

MARK Key

Press the MARK key while in any view to mark the position of a waypoint,

either at the current boat location, or, if the Cursor is active, at the current

Cursor location.

GOTO Key

If the Cursor is active, pressing the GOTO key while in any view creates a

waypoint and starts navigation towards that waypoint. If the Cursor is

not active, pressing the GOTO key displays the list of waypoints, so that

you can select the waypoint towards which you want to navigate.

ZOOM (+/-) Key

Press the - or + ZOOM keys while in any of the Navigation Views or

the Sonar Zoom View to change the scale of the view to appear

closer or farther away.

EXIT Key

The EXIT key has multiple functions, depending on the situation:

• If an alarm is sounding, pressing EXIT will cancel the alarm.

• If a menu tab is selected, pressing EXIT will exit the menu mode and return

to the view.

• If a menu is active, pressing EXIT will return to the previous level in the menu

system.

• Pressing EXIT will cycle through the available views in reverse order.

• If Freeze Frame is active, pressing EXIT will return to a scrolling display.

• If the Cursor is active, pressing EXIT will remove the cursor from the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Powering Up the Unit

Turn on your 300 Series^TMFishing System by pressing

the POWER/LIGHT key. The Title screen is displayed

until the 300 Series^TMFishing System begins

operation. Your 300 Series^TMFishing System will

begin Normal or Simulator operation, depending on

the presence or absence of a transducer.

363

363 Title Screen

The Menu System

The menu system is divided into easy-to-use menu modules. The main components of

the menu system are:

Start-Up Options Menu - Press the MENU key during the power up sequence to view the

Start-Up Options menu.

X-Press^TMMenu - The X-Press^TMmenu allows you to access the

settings that are changed frequently without having to

navigate through the whole menu system. Press the MENU

key once to display the X-Press^TMMenu. When you select a

menu item from the X-Press^TMmenu, the menu will collapse,

leaving only the menu choice on the screen. Use the Up or

Down Cursor keys to reactivate the X-Press^TMmenu.

NOTE: The X-Press^TMMenu choices will vary depending on which

view is active when you press the MENU key, as well as whether

you are in Normal or Advanced User Mode. Either the Sonar or

Navigation X-Press^TMMenu will appear, depending on the view

you are in.

X-Press^TMMenu

Main Menu Tabs - Less frequently-adjusted menus are grouped into the Main Menu

System. The Main Menu system is organized under the following tab headings to

help you find a specific menu item quickly: Alarms, Sonar, Navigation, Chart, Setup,

and Views.

_{Download from Www.Somanuals.co}2_m8_{. All Manuals Search And Download.}

Press the MENU key twice for the Main Menu, then use the

4-WAY Cursor LEFT or RIGHT key to select a tab, and use the

DOWN or UP key to select a specific menu item under that tab,

then use the LEFT or RIGHT keys again to change a menu setting.

Press the EXIT key to move quickly to the top of the tab. A down

arrow at the bottom of a menu means that you can scroll to

additional menu choices using the DOWN Cursor key. A right or

left arrow on a menu choice means that you can use the RIGHT

or LEFT Cursor keys to make changes or to see more information.

Main Menu System

Normal User Mode

NOTE: The Main Menu choices will vary depending on whether you are in Normal or

Advanced User Mode.

User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire

the highest level of control over the 300 Series^TMFishing System and Normal Mode for

users who desire greater simplicity and fewer menu choices. Additional Advanced menu

choices will be displayed throughout the menu system when you navigate to specific

menus while in Advanced Mode. Any changes made while in Advanced Mode will

remain in effect after you switch back to Normal Mode. See Setup Menu Tab: User Mode

for specific instructions on changing to Advanced User Mode.

Sonar Tab

Normal Mode

Sonar Tab

Advanced Mode

_{Download from Www.Somanuals.co}2_m9_{. All Manuals Search And Download.}

Total Screen Update - when you change any menu settings that affect the Sonar

View, the view will update immediately (i.e. you don’t have to exit the menu to apply

the change to the screen). For instance, by switching between "Inverse" and

"Structure ID®" from the X-Press^TMmenu it is possible to alternate quickly between

the two viewing methods.

Start-Up Options Menu

Press the MENU key when the Title screen is

displayed to access the Start-Up Options menu.

Use the UP or DOWN 4-WAY Cursor keys to position

the cursor, then the RIGHT Cursor key to select one of

the following choices. If you wait too long, the system

will default to whichever menu mode happens to be

highlighted:

Start-Up Options Menu

• Normal

• Simulator

• System Status.

See the following paragraphs for more information about each of these choices.

Normal Operation

Use Normal operation for on the water operation with a transducer connected. In

addition, your 300 Series^TMFishing System uses advanced transducer detection methods

to determine if a transducer is connected. If a functioning transducer is connected,

Normal operation will be selected automatically at power up and your 300 Series^TM

Fishing System can be used on the water.

Exit Normal operation by powering your 300 Series^TMFishing System off.

_{Download from Www.Somanuals.co}3_m0_{. All Manuals Search And Download.}

Simulator

Use the Simulator to learn how to use your 300

Series^TMFishing System before taking your boat on

the water. The Simulator is a very powerful tool that

simulates on the water operation, providing a

randomly-updated display. We recommend going

through this manual while using the Simulator, since

all of the menus function and affect the display the

way they actually do when in Normal operation.

Simulator

NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually

from the Start-Up Options menu as opposed to letting the 300 Series^TMFishing System enter

Simulator automatically (as it will if a transducer is not connected and you do nothing during

power up). Manually selecting Simulator from the Start-Up Options menu allows you to pre-

configure your 300 Series^TMFishing System for on the water operation. Any menu changes you

make will be saved for later use.

A message will appear on the display periodically to remind you that you are using the

Simulator.

Exit the Simulator by powering your 300 Series^TMFishing System off.

System Status

Use System Status to view system connections and to conduct a unit self-test.

The following screens are displayed in turn when you press the VIEW button when using

System Status:

• Self Test

• Accessory Test

• GPS Diagnostic View.

Exit System Status by powering your Fishing System off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Self Test

Self Test displays results from the internal diagnostic

self test, including unit serial number, Printed Circuit

Board (PCB) serial number, software revision, total

hours of operation and the input voltage.

System Status Self Test Screen

Accessory Test

Accessory Test lists the accessories connected to the

system.

NOTE: The speed accessory will be detected only if the

paddlewheel has moved since your 300 Series^TMFishing

System was powered up.

System Status Accessory Test Screen

Download from Www.Somanuals.com. All Manuals Search And Download.

GPS Diagnostic View

GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The

sky chart shows the location of each visible GPS satellite with its satellite number and a

signal strength bar. A dark grey bar indicates that the satellite is being used to determine

your current position. A light gray bar indicates that the satellite is being monitored, but

is not yet being used.

GPS Diagnostic View

Sky Chart

Satellite Being

Used

Satellite Being

Monitored

Current Latitude

and Longitude

This view also reports the current position, local time and date, and other numeric

information. The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced.

An Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS.

A 3D or Enhanced Fix is required for navigation. HDOP (the Horizontal Dilution of

Precision) is a GPS system parameter which depends on the current satellite

configuration. HDOP is used to calculate the Estimated Position Error.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sonar X-Press^TMMenu

(Sonar views only)

The Sonar X-Press^TMmenu provides access to the settings

most frequently-used. Press the MENU key once while in

any of the Sonar Views to access the Sonar X-Press^TMmenu.

NOTE: Menu choices will vary depending on system settings

such as whether the unit is set for Advanced User mode.

Sonar X-Press^TMMenu

_{Download from Www.Somanuals.co}3_m4_{. All Manuals Search And Download.}

Sensitivity

Sensitivity controls how much detail is shown on the

display and will adjust the sensitivity of all sonar frequencies. Increasing the sensitivity

shows more sonar returns from small baitfish and suspended debris in the water;

however, the display may become too cluttered. When operating in very clear water or

greater depths, increased sensitivity shows weaker returns that may be of interest.

Decreasing the sensitivity eliminates the clutter from the display that is sometimes

present in murky or muddy water. If Sensitivity is adjusted too low, the display may not

show many sonar returns that could be fish.

NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity of all sonar

frequencies, as compared to specific sensitivity adjustments (such as 83 kHz Sensitivity) that

allow you to adjust the level of sensitivity for one specific beam at a time.

Sensitivity at Low

Sensitivity at Medium

Sensitivity at High

To adjust the Sensitivity:

1. Highlight Sensitivity on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the

Sensitivity setting. (Low = 1, High = 20, Default = 10)

Download from Www.Somanuals.com. All Manuals Search And Download.

Upper Range

(Advanced: Sonar, Split Sonar, Big Digits

and Circular Flasher views only)

Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split

Sonar, Big Digits and Circular Flasher Views. The Upper Range menu choice is available

when User Mode is set to Advanced (see Setup Menu Tab: User Mode) and can only be

accessed from the Sonar, Split Sonar, Big Digits and Circular Flasher Views. Upper Range

is often used with Lower Range.

For example, if you are only interested in the area between 20 and 50 feet

deep, you should set the Upper Depth Range to 20 and the Lower Depth

Range to 50. The Sonar View will then show the 30 foot area between 20

and 50, and will not show the surface or the bottom (assuming the

bottom is deeper than 50 feet), and will show greater detail for that area

between 20 and 50 feet.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower

Range regardless of the manual settings entered.

To adjust the Upper Range:

1. Make sure you are in Advanced Mode, then highlight Upper Range on the Sonar

X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the

Upper Range setting. (0 to 990 feet or 0 to 327 meters [International Models

only], Default = 0)

_{Download from Www.Somanuals.co}3_m6_{. All Manuals Search And Download.}

Lower Range

Lower Range sets the deepest depth range that will be

displayed. Automatic is the default setting. When in automatic mode, the lower range

will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the

depth range into Manual mode. Use both Upper and Lower Range together to view a

specific depth range manually when looking for fish or bottom structure.

displayed in the lower right corner of the screen when you start manually adjusting the

Lower Range to indicate that you are in Manual mode.

will be

For example, if you are fishing in 60 feet of water but are only interested

in the first 30 feet (surface to a depth of 30 feet) you should set the Lower

Depth Range limit to 30. The display will show the 0 to 30 foot range,

allowing you to see a more detailed view than you would see if the

display went all the way to the bottom.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower

Range regardless of the manual settings entered.

To adjust the Lower Range:

1. Highlight Lower Range on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the

Lower Range setting. (AUTO, 10 to 1000 feet, 3 to 330 meters [International

Models only], Default = AUTO)

Download from Www.Somanuals.com. All Manuals Search And Download.

Chart Speed

Chart Speed determines the speed at which the sonar

information moves across the display, and consequently the amount of detail shown. A

faster speed shows more information in the Sonar Views and is preferred by most

anglers; however, the sonar information moves across the display quickly. A slower

speed keeps the information on the display longer, but the bottom and fish details

become compressed and may be difficult to interpret. Regardless of the Chart Speed

setting, the RTS® Window will update at the maximum rate possible for the depth

conditions. Adjust Chart Speed to your personal preference.

To adjust the Chart Speed:

1. Highlight Chart Speed on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart

Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)

Bottom View

Bottom View selects the method used to represent

bottom and structure on the display.

Inverse represents weak returns as dark pixels and strong returns as lighter pixels. This

has the benefit of ensuring that weak signals will be clearly visible on the display.

Structure ID® represents weak returns as light pixels and strong returns as dark pixels.

This has the benefit of ensuring that strong returns will be clearly visible on the display.

WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive

outline. This has the benefit of clearly defining the bottom on the display.

Bottom Black displays all pixels below the bottom contour as black, regardless of signal

strength. This has the benefit of providing a high contrast between the bottom and

other sonar returns on the display. Any targets such as fish, structure and thermoclines

will be shown using the Structure ID® method.

See Bottom Presentation for more information.

To adjust the Bottom View:

1. Highlight Bottom View on the Sonar X-Press^TMMenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom View

setting. (Inverse, Structure ID®, WhiteLine®, Bottom Black, Default = Inverse)

_{Download from Www.Somanuals.co}3_m8_{. All Manuals Search And Download.}

Bottom Range

(Sonar Zoom view only when Bottom Lock is On)

Bottom Range allows you to control how much of the water column, measured up

from the bottom, is shown in the Sonar Zoom View. Choose a small value to see low-

lying bottom structure or details of the bottom return. Choose a larger value to see

large structure in deeper water. It is possible to set the Bottom Range to be greater

than the depth. In this case, you may see surface clutter in a wavy band that mirrors

changes in the depth.

To adjust the Bottom Range:

1. In the Sonar Zoom View, highlight Bottom Range on the Sonar X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom

Range setting. (10 - 60 feet or 3-20 meters [International Models only],

Default = 15 feet)

Bottom Lock

(Sonar Zoom view only)

Bottom Lock changes the mode of the Zoomed view in the Sonar Zoom View. Bottom

Lock continuously graphs the bottom at a constant point on the display regardless of

changes in depth. This "flattens" out the bottom contour, but is effective at showing fish

on or near the bottom.

To turn on Bottom Lock:

1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press^TMMenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock

setting to on. (Off, On, Default = Off)

_{Download from Www.Somanuals.co}3_m9_{. All Manuals Search And Download.}

Cancel Navigation

(only when Navigating)

Cancel Navigation discards the current route and exits Navigation Mode. This menu

choice will only appear when you are currently navigating a route. This will not delete a

previously-saved route.

To Cancel Navigation:

1. Highlight Cancel Navigation on the Sonar X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.

3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT

Cursor key once more. To avoid canceling navigation, press the LEFT Cursor key.

4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key

to save the route or the LEFT 4-WAY Cursor key to decline saving the route.

_{Download from Www.Somanuals.co}4_m0_{. All Manuals Search And Download.}

Navigation X-Press^TMMenu

(Navigation views only)

The Navigation X-Press^TMmenu provides access to the

settings most frequently used. Press the MENU key once

while in the Bird's Eye View, the Chart or the Combo View

to access the Navigation X-Press^TMmenu.

NOTE: Menu choices will vary depending on system settings,

such as whether you are currently navigating.

Navigation X-Press^TMMenu

Download from Www.Somanuals.com. All Manuals Search And Download.

Waypoint [Name]

(Only with an active cursor on a waypoint)

Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under

your cursor.

To view the Waypoint [Name] Submenu:

1. Move the cursor onto an existing waypoint and press the MENU key once, or use

Cursor to Waypoint to select a waypoint from a list of saved waypoints.

2. Highlight Waypoint[Name] on the Navigation X-Press^TMmenu.

3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which

contains the following menu choices:

Waypoints Submenu

The Waypoint Submenu contains the following menu choices:

Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon

that will be used to represent the waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the list of saved waypoints.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

_{Download from Www.Somanuals.co}4_m2_{. All Manuals Search And Download.}

Cursor to Waypoint

(Chart or Combo view only)

Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so

that you can locate it or edit it.

NOTE This X-Press^TMmenu item appears only if you have saved waypoints.

To move cursor to a saved waypoint:

1. Highlight Cursor to Waypoint on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.

3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you

wish to move the cursor to, then use the RIGHT 4-WAY Cursor Control key to

select the destination waypoint.

Save Current Track

Save Current Track allows you to save the current track

being displayed. After the current track is saved, a new current track is started.

To Save Current Track:

1. Highlight Save Current Track on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3. The Confirm dialog box will appear. To save the current track, press the

RIGHT Cursor key once more. To cancel saving the current track, press the

LEFT Cursor key.

Clear Current Track

Clear Current Track allows you to clear the current track

being displayed and start a new track at the present position.

To Clear Current Track:

1. Highlight Clear Current Track on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.

3. The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor

key once more. To cancel clearing the current track, press the LEFT Cursor key.

_{Download from Www.Somanuals.co}4_m3_{. All Manuals Search And Download.}

Save Current Route

(only when Navigating)

Save Current Route allows you to save the current route being displayed. This menu

choice will only appear when you are currently navigating a route.

To Save Current Route:

1. Highlight Save Current Route on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route.

3. The Confirm dialog box will appear. To save the current route, press the RIGHT

Cursor key once more. To cancel saving the current route, press the LEFT Cursor key.

Skip Next Waypoint

(only when Navigating)

Skip Next Waypoint removes the next waypoint from the current route. This menu

choice will only appear when you are currently navigating a route.

To Skip Next Waypoint:

1. Highlight Skip Next Waypoint on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.

3. The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT

Cursor key once more. To cancel skipping the next waypoint, press the LEFT

Cursor key.

_{Download from Www.Somanuals.co}4_m4_{. All Manuals Search And Download.}

Cancel Navigation

(only when Navigating)

Cancel Navigation discards the current route and exits Navigation Mode. This menu

choice will only appear when you are currently navigating a route. This will not delete a

previously-saved route.

To Cancel Navigation:

1. Highlight Cancel Navigation on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.

3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT

Cursor key once more. To avoid canceling navigation, press the LEFT Cursor key.

4. The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key

to save the route or the LEFT 4-WAY Cursor key to decline saving the route.

Remove Target

(only if a Target is Active)

Remove Target removes the waypoint target from the display. This menu choice will

only appear when a target has already been applied to a waypoint.

NOTE: See Add a Waypoint Target or Trolling Grid for more information.

To Remove a Target:

1. Highlight Remove Target on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to remove the target.

_{Download from Www.Somanuals.co}4_m5_{. All Manuals Search And Download.}

Remove Grid

(only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only

appear when a grid has already been applied to a waypoint.

NOTE: See Add a Waypoint Target or Trolling Grid for more information.

To Remove a Grid:

1. Highlight Remove Grid on the Navigation X-Press^TMmenu.

2. Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Sonar Window

(Combo view only)

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window

can only be accessed from the Combo View.

To Set the Size of the Sonar Window in the Combo View:

1. Highlight Sonar Window on the Navigation X-Press^TMmenu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar

window. (Wide, Medium, Narrow, Default = Medium)

_{Download from Www.Somanuals.co}4_m6_{. All Manuals Search And Download.}

Waypoint [Name]

(Most recently-created waypoint)

Waypoint [Name] allows you to view the waypoints submenu for the most recently

created waypoint.

NOTE: You must have pressed the MARK key at least once since you last powered up the

fishfinder for this menu choice to appear.

To view the Waypoint [Name] Submenu:

1. Move the cursor to the desired position and press the MARK key once to save a

waypoint.

2. Highlight Waypoint[Name] on the Navigation X-Press^TMmenu.

3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.

Waypoint [Name] Submenu

The Waypoint Submenu contains the following menu choices:

Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon

that will be used to represent the waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the list of saved waypoints.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add

that waypoint to the end of the current route.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

_{Download from Www.Somanuals.co}4_m7_{. All Manuals Search And Download.}

Sonar Menu Tab

Press the MENU key twice to access the Main Menu

System and then press the RIGHT Cursor key to select the

Sonar tab.

NOTE: Menu choices will vary depending on system settings

such as whether the unit is set for Advanced User mode or

what transducer is currently selected.

Sonar Menu

_{Download from Www.Somanuals.co}4_m8_{. All Manuals Search And Download.}

Beam Select

Beam Select sets which sonar returns from the

transducer will be displayed on the screen.

When set to 200/83 kHz, the returns from both beams are blended by starting with the

83 kHz wide beam return, dimming it, and then overlaying it with the 200 kHz narrow

beam return. The darker 200 kHz narrow beam sonar returns will stand out from the

paler 83 kHz wide beam sonar returns. The Split Sonar View continues to display the

sonar returns from each beam in their respective windows. The blended information is

shown in the Sonar View, Sonar Zoom View, and the Big Digits View. The RTS® Window

in the Sonar View and the Circular Flasher View will only show the returns from the 200

kHz narrow beam.

When set to 200 kHz, only the returns from the 200 kHz narrow beam will be displayed

in the Sonar View, the Sonar Zoom View, the Big Digits View and the Circular Flasher

View. The Split Sonar View will continue to display returns from both beams in their

respective windows. The RTS® Window in the Sonar View will display the returns from

the 200 kHz narrow beam.

When set to 83 kHz, the returns from the 83 kHz wide beam will be displayed in the

Sonar View, the Sonar Zoom View, the Big Digits View and the Circular Flasher View. The

Split Sonar View will continue to display returns from both beams in their respective

windows. The RTS® Window will display the returns from the 83 kHz wide beam.

To use Beam Select:

1. Highlight Beam Select on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select either the 83 kHz

beam, the 200 kHz beam, or the 200/83 kHz beam. (200/83 kHz, 200 kHz,

83 kHz, Default = 200 kHz)

_{Download from Www.Somanuals.co}4_m9_{. All Manuals Search And Download.}

Fish ID+^TM

Fish ID+^TMuses advanced signal processing to interpret

sonar returns, and will display a Fish Symbol when very selective requirements are met.

When a fish is detected, a fish icon and its depth are displayed above the return that has

been classified as being a fish. Three different fish size icons represent the intensity of

the sonar return, and provide an indicator of relative fish size.

DualBeam PLUS^TMSonar models represent targets detected in the 200 kHz narrow beam

as Shaded Fish Symbols, and represent targets detected in the 83 kHz wide beam as

Hollow Fish Symbols.

200 kHz, Narrow Beam

Shaded Fish Symbols

83 kHz, Wide Beam

Hollow Fish Symbols

When Fish ID+^TMis turned off, the 300 Series^TMFishing System shows only the raw sonar

returns on the display. These returns will often result in "arches" forming on the display,

indicating potential targets. Due to the transducer beam angle, the distance to a fish

decreases as the fish moves into the beam, and then increases as it moves out again,

creating a Fish Arch when this distance change is shown on the display. Boat speed,

chart speed, and the position of the fish within the sonar beam greatly affect the shape

of the arch.

Transducer Cone and Fish Arches

To turn Fish ID+^TMon or off:

1. Highlight Fish ID+ on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Fish ID+^TMsetting

On or Off. (Off, On, Default = Off)

_{Download from Www.Somanuals.co}5_m0_{. All Manuals Search And Download.}

Fish ID Sensitivity

Fish ID Sensitivity adjusts the threshold of the Fish

ID+^TMdetection algorithms. Selecting a higher setting allows weaker returns to be

displayed as fish. This is useful for identifying smaller fish species or baitfish. Selecting

a lower setting displays fewer fish from weak sonar returns. This is helpful when

seeking larger species of fish. Fish ID Sensitivity is used in conjunction with Fish ID+^TM.

Fish ID+^TMmust be On for Fish ID Sensitivity to affect the ability of the 300 Series^TM

Fishing System to identify sonar returns as fish.

To change the Fish ID Sensitivity setting:

1. Highlight Fish ID Sensitivity on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID

Sensitivity setting. (Low = 1, High = 10, Default = 5)

Real Time Sonar (RTS®) Window

RTS® Window sets the RTS® Window to either Wide or

Narrow, or turns it off in the Sonar View. The RTS® Window always updates at the fastest

rate possible and only displays returns that are within the transducer beam. (See Real

Time Sonar (RTS®) Window for more information.)

RTS® Window (Wide)

RTS® Window (Narrow)

RTS® Window (Off)

To change the RTS® Window setting:

1. Highlight RTS Window on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS® Window

setting. (Wide, Narrow, Off, Default = Wide)

Download from Www.Somanuals.com. All Manuals Search And Download.

Zoom Width

Zoom Width adjusts the width of the Zoom window on

the Sonar Zoom View.

To change the Zoom Width Setting:

1. Highlight Zoom Width on the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Width

setting. (Narrow, Medium, Wide, Default = Wide)

83 kHz Sensitivity

(Advanced)

83 kHz Sensitivity changes the sensitivity of the 83 kHz beam. Increasing the 83 kHz

Sensitivity will display additional weak returns and decreasing the 83 kHz Sensitivity will

display fewer weak returns. The 83 kHz Sensitivity menu choice is only available when

User Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: 83 kHz Sensitivity is particularly useful for adjusting the sensitivity of the 83 kHz sonar

returns in the 200/83 kHz Split Sonar View. The 83 kHz sensitivity can be adjusted without

affecting the sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.

To set the 83 kHz Sensitivity:

1. Make sure you are in Advanced User Mode, then highlight 83 kHz Sensitivity on

the Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to set the 83 kHz Sensitivity.

(-10 to +10, Default = 0)

Download from Www.Somanuals.com. All Manuals Search And Download.

Depth Lines

(Advanced)

Depth Lines divide the display into four equal sections that are separated by three

horizontal depth lines. The depth of each line is displayed along the depth scale. You can

either turn Depth Lines On or Off. The Depth Lines menu choice is available when User

Mode is set to Advanced (see Setup Menu Tab: User Mode).

Depth Lines

Depth

Lines

To change the Depth Lines setting:

1. Make sure you are in Advanced User Mode, then highlight Depth Lines on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth Lines setting

On or Off. (Off, On, Default = On)

Download from Www.Somanuals.com. All Manuals Search And Download.

Surface Clutter

(Advanced)

Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and

aeration. The lower the setting, the less surface clutter will be displayed. The Surface

Clutter menu choice is available when User Mode is set to Advanced (see Setup Menu

Tab: User Mode).

Surface Clutter

Surface

Clutter

To change the Surface Clutter setting:

1. Make sure you are in Advanced User Mode, then highlight Surface Clutter on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Surface Clutter

setting. (Low = 1 to High = 10, Default = 5)

_{Download from Www.Somanuals.co}5_m4_{. All Manuals Search And Download.}

Noise Filter

(Advanced)

Noise Filter adjusts the sonar Noise Filter to limit interference on the display from

sources such as your boat engine, turbulence, or other sonar devices. The Noise Filter

menu choice is available when User Mode is set to Advanced (see Setup Menu Tab:

User Mode).

NOTE: The Off setting removes all filtering; Low, Medium and High settings add progressive

filtering of the sonar returns. In some deep water situations, the High setting may actually

hinder your unit’s ability to find the bottom.

To change the Noise Filter setting:

1. Make sure you are in Advanced User Mode, then highlight Noise Filter on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise Filter

setting. (Off, Low, Medium, High1, High2, High3, Default = Low)

Max Depth

(Advanced)

Max Depth adjusts the maximum depth of operation. The performance of your 300

Series^TMFishing System can be tuned to the maximum depth you will be fishing in by

setting the Max Depth. When a maximum depth is set, your 300 Series^TMFishing System

will not attempt to acquire sonar data below that depth, thus increasing overall

performance. When Max Depth is set to Auto, the 300 Series^TMFishing System will

acquire bottom readings as needed (within the capacity of the unit). If the bottom is

deeper than the Max Depth setting, the digital depth readout will flash, indicating that

the 300 Series^TMFishing System cannot locate the bottom. The Max Depth menu choice

is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

To change the Max Depth setting:

1. Make sure you are in Advanced User Mode, then highlight Max Depth on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max Depth

setting. (AUTO, 10 to 1000 feet, 3 to 330 meters [International Models only],

Default = AUTO)

Download from Www.Somanuals.com. All Manuals Search And Download.

Water Type

(Advanced)

Water Type configures your unit for operation in fresh or salt water. The Water Type

menu choice is available when User Mode is set to Advanced (see Setup Menu Tab:

User Mode).

NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than

a large fish in fresh water (depending on the type of fish you are seeking). The salt water

setting allows for a greater range in fish size adjustment to account for this. Also, make sure

that the Water Type is set accurately, especially in salt water, as this affects the accuracy of

deep water depth readings.

To change the Water Type setting:

1. Make sure you are in Advanced User Mode, then highlight Water Type on the

Sonar main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type

setting. (Fresh, Salt, Default = Fresh)

_{Download from Www.Somanuals.co}5_m6_{. All Manuals Search And Download.}

Navigation Menu Tab

Press the MENU key twice to access the Main Menu

System, then press the RIGHT cursor key to select the

Navigation tab.

NOTE: Menu choices will vary depending on system settings.

Navigation Menu Tab

Download from Www.Somanuals.com. All Manuals Search And Download.

Current Track

Current Track allows you to view the Current Track

submenu.

To view the Current Track Submenu:

1. Highlight Current Track on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Current Track submenu.

Current Track Submenu

The Current Track Submenu contains the following menu choices:

Save Current Track allows you to save the current track.

Clear Current Track allows you to clear the current track.

Appearance allows you to change the style and color of the current track.

(Breadcrumb Trail, Dashed Line, or Solid Line, and if a line, the color of the line, from

light to dark gray to black).

_{Download from Www.Somanuals.co}5_m8_{. All Manuals Search And Download.}

Saved Tracks

Saved Tracks allows you to view the Saved Tracks

submenu.

To view the Saved Tracks Submenu:

1. Highlight Saved Tracks on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Saved Tracks submenu.

Saved Tracks Submenu

The Saved Tracks Submenu contains the following menu choices:

Edit allows you to select a previously-saved track and edit its name, whether it is visible

or not, and its appearance.

Delete allows you to delete a track from a list of previously-saved tracks.

Default sets the appearance of the track created by selecting Save Current Track.

_{Download from Www.Somanuals.co}5_m9_{. All Manuals Search And Download.}

Waypoints

Waypoints allows you to view the Waypoints

submenu.

To view the Waypoints Submenu:

1. Highlight Waypoints on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu.

Waypoints Submenu

The Waypoints Submenu contains the following menu choices:

Create allows you to create a new waypoint and edit it immediately. The current boat

position will be used as the default, but you can set the coordinates to any valid position.

The Icon used to represent the waypoint in the Chart and Combo Views can also be

changed.

Edit allows you to choose from a list of previously-saved waypoints, then edit the Name,

Position (Latitude and Longitude) and select the Icon that will be used to represent the

waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the list of saved waypoints.

Cursor To allows you to move the cursor quickly to a waypoint selected from the list of

saved waypoints.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add

that waypoint to the end of the current route.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

_{Download from Www.Somanuals.co}6_m0_{. All Manuals Search And Download.}

Routes

Routes allows you to view the Routes submenu.

To view the Routes Submenu:

1. Highlight Routes on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control keys to view the Routes submenu.

Routes Submenu

The Routes Submenu contains the following menu choices:

Create allows you to create a new, empty route and add waypoints to it immediately.

Edit allows you to select a previously-saved route and edit its name and the

waypoints on it.

Delete allows you to delete a route from a list of previously-saved routes.

Travel allows you to select a previously-saved route to use as the current route; this

menu setting also begins navigation on this route. Routes can be traveled in either the

forward or reverse direction.

Info displays information about the route, including the distance and bearing from each

waypoint to the next.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chart Orientation

Chart Orientation allows you to select whether the

Chart and Combo Views should be drawn North-Up or Course-Up.

To change the Chart Orientation setting:

1. Highlight Chart Orientation on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart

Orientation setting. (North-Up, Course-Up, Default = North-Up)

NOTE: The Chart Orientation setting does not apply to the Bird's Eye View.

North Reference

North Reference allows you to have bearings displayed

with one of two orientations: True North or Magnetic North.

To change the North Reference setting:

1. Highlight North Reference on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the North Reference

setting. (True, Magnetic, Default = True)

Grid Rotation

Grid Rotation allows you to set the orientation of the

trolling grid in degrees, where a setting of 0° displays a standard North, South, East,

West alignment. See Waypoints for information on how to set a Grid.

To change the Grid Rotation setting:

1. Highlight Grid Rotation on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Grid Rotation

setting. (0° to 89°, Default = 0°)

_{Download from Www.Somanuals.co}6_m2_{. All Manuals Search And Download.}

Trackpoint Interval

Trackpoint Interval allows you to select the time

period between trackpoints. The current track can only contain up to 20,000

trackpoints, so longer time periods cause the track to extend back further in time,

but will be less detailed.

NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions

must be met before a trackpoint is added to the current track.

To change the Trackpoint Interval setting:

1. Highlight Trackpoint Interval on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Trackpoint

Interval setting. (1 second, 5 seconds, 10 seconds, 15 seconds, 30 seconds or 60

seconds, Default = 15 seconds)

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to

small values will allow you to increase the track resolution.

Track Min Distance

(Advanced)

Track Min Distance allows you to set a minimum distance of travel before a trackpoint

is added to the track. The Track Min Distance menu choice is only available when User

Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions

must be met before a trackpoint is added to the current track.

To change the Track Minimum Distance setting:

1. Make sure you are in Advanced User Mode, then highlight Track Min Distance

on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Track Min

Distance setting. (1 to 300 feet or 1 to 100 meters [International Units only],

Default = 16 ft, 5 m)

NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to

small values will allow you to increase the track resolution.

_{Download from Www.Somanuals.co}6_m3_{. All Manuals Search And Download.}

Map Datum

(Advanced)

Map Datum allows you to change the map coordinate system used by the 300 Series^TM

Fishing System to match those of a paper map. The Map Datum menu choice is only

available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

To change the Map Datum setting:

1. Make sure you are in Advanced User Mode, then highlight Map Datum on the

Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum

setting. (Default = WGS 84)

_{Download from Www.Somanuals.co}6_m4_{. All Manuals Search And Download.}

Course Projection Line

Course Projection Line allows you to display or hide an

arrow extending from the bow of the boat that projects your current course, and shows

where the boat will go if you continue on your present course.

To change the Course Project Line setting:

1. Highlight Course Projection Line on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Course

Projection Line setting (Hidden, Visible, Default = Hidden)

Delete All Nav Data

(Advanced)

Delete All Nav Data allows you to delete all saved Tracks, Waypoints and Routes. This

menu choice should be used with caution. The Delete All Nav Data menu choice is only

available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

To Delete All Navigation Data:

1. Make sure you are in Advanced User Mode, then highlight Delete All Nav Data

on the Navigation main menu.

2. Use the RIGHT 4-WAY Cursor Control key to delete all navigation data.

_{Download from Www.Somanuals.co}6_m5_{. All Manuals Search And Download.}

Chart Menu Tab

Press the MENU key twice to access the Main Menu

System and then press the RIGHT Cursor key to select

the Chart tab.

NOTE: Menu choices will vary depending on system

settings such as whether the unit is set for Advanced User

mode.

Chart Menu

_{Download from Www.Somanuals.co}6_m6_{. All Manuals Search And Download.}

Chart Detail Level

Chart Detail Level allows you to select how much chart

detail you want displayed on the Navigation Views. Basic shows land areas, ports,

obstructions and restricted areas. Navigation shows navaids, landmarks, ferryways and

navigation routes in addition to the Basic information. Underwater shows depth

contours, fishing areas, underwater wrecks, tides and currents in addition to the Basic

and Navigation information. All shows roads, buildings, railways, and other notations in

addition to the Basic, Navigation and Underwater information.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail

Level setting. (Basic, Navigation, Underwater, All, Default = All)

NOTE: Some chart details are only available with optional-purchase MMC/SD cards.

Map Borders

Map Borders allows you to display or hide map borders.

A Map Border indicates an area which contains a different map.

Map Borders

_{Download from Www.Somanuals.co}6_m7_{. All Manuals Search And Download.}

To change the Map Borders setting:

1. Highlight Map Borders on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders

setting. (Hidden, MMC/SD Only, All Visible, Default = Hidden)

Lat/Lon Grid

Lat/Lon Grid allows you to display or hide a grid

showing latitude and longitude lines.

To change the Lat/Lon Grid setting:

1. Highlight Lat/Lon Grid on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid

setting. (Hidden, Visible, Default = Hidden)

Set Simulation Position

(Advanced)

Set Simulation Position allows you to set the position of the boat used in the Simulator.

The Set Simulation Position menu choice is only available when User Mode is set to

Advanced (see Setup Menu Tab: User Mode).

To set the Simulation Position:

1. Activate the cursor and move it to the coordinates from where you want the

simulation to start.

NOTE: The cursor must be active in order for this procedure to work.

2. Make sure you are in Advanced User Mode, then highlight Set Simulation

Position on the Chart main menu.

3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position

setting. A confirmation dialog box will appear to allow you to change your

mind, or to confirm your choice. If the cursor was not active before you

began this procedure, you will see an error message. Exit the menu, set the

cursor, then try again.

_{Download from Www.Somanuals.co}6_m8_{. All Manuals Search And Download.}

Set Map Offset

(Advanced)

Set Map Offset allows you to change the map offset used by the 300 Series^TM. The Set

Map Offset menu choice is only available when User Mode is set to Advanced (see Setup

Menu Tab: User Mode).

NOTE: The Map Offset will be applied to all maps and not just the map that requires the

correction. The Map Offset should be cleared if a different map is to be used.

To change the Map Offset setting:

1. Activate the cursor and move it to the location where the Map Offset will be

applied.

NOTE: The cursor must be active in order for this procedure to work.

2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on

the Chart main menu.

3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset. A confirmation

dialog box will appear to allow you to change your mind, or to confirm your

choice. If the cursor was not active before you began this procedure, you will see

an error message. Exit the menu, set the cursor, then try again.

Clear Map Offset

(Advanced)

Clear Map Offset allows you to clear the Map Offset. The Clear map Offset menu choice

is only available when User Mode is set to Advanced (see Setup Menu Tab: User Mode)

and a Map Offset is currently active.

To Clear Map Offset:

1. Make sure you are in Advanced User Mode, then highlight Clear Map Offset on

the Chart main menu.

2. Use the RIGHT 4-WAY Cursor Control key to clear the Map Offset.

_{Download from Www.Somanuals.co}6_m9_{. All Manuals Search And Download.}

Alarms Menu Tab

From any view, press the MENU key twice to access the

Main Menu System. The Alarms tab will be the default

selection.

NOTE: When an alarm is triggered, you can silence it by

pressing any key. The alarm will be silenced, and will not be

triggered again until a new instance of the alarm condition is

detected.

Alarms Menu

_{Download from Www.Somanuals.co}7_m0_{. All Manuals Search And Download.}

Depth Alarm

Depth Alarm sounds when the depth becomes equal to

or less than the menu setting.

To change the Depth Alarm setting:

1. Highlight Depth Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm

setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only],

Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Fishing System

detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish

ID+^TMis on.

For example, if you've set the Fish ID Alarm to sound for Large fish only,

the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1. Highlight Fish ID Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm

setting. (Off, All, Large/Medium, Large, Default = Off)

Off

Large

Large/Medium

All

Download from Www.Somanuals.com. All Manuals Search And Download.

Low Battery Alarm

Low Battery Alarm sounds when the input battery

voltage is equal to or less than the menu setting. The battery alarm will only sound

for the battery that is connected to the 300 Series^TMFishing System. The Low

Battery Alarm should be set to warn you when the battery voltage drops below the

safety margin that you have determined. For instance, if you are running a trolling

motor (battery operated), you would want to set the Low Battery Alarm to sound

before the battery voltage drops too low for it to be used to start your main,

gasoline-powered engine.

To change the Low Battery Alarm setting:

1. Highlight Low Battery Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery

Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

Temp Alarm

Temp Alarm sounds when the water temperature

detected by the 300 Series^TMreaches the Temp Alarm setting, which is either set in

degrees Fahrenheit or Celsius [International Models only]. For example, if the Temp

Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees

to 58 degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from

56 degrees to 58 degrees, the Temp Alarm will also sound.

To change the Temp Alarm setting:

1. Highlight Temp Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm

setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)

Download from Www.Somanuals.com. All Manuals Search And Download.

Off Course Alarm

Off Course Alarm sounds when the boat has moved

too far off course based on the menu setting when navigating. Off Course Alarm

allows you to set how far the boat is allowed to move off course before the Off

Course Alarm will sound.

Off Course Limits

Arrival Alarm Circle

To change the Off Course Alarm setting:

1. Highlight Off Course Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm

setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only],

Default = 300 ft, 100 m)

Arrival Alarm

Arrival Alarm sounds when the boat has either

exceeded the distance to the destination waypoint, or has entered the Arrival Alarm

Circle, based on the menu setting when navigating. Arrival Alarm allows you to set how

close the boat must be to the destination waypoint before the Arrival Alarm will sound.

To change the Arrival Alarm setting:

1. Highlight Arrival Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm

setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only],

Default = 150 ft, 50 m)

Download from Www.Somanuals.com. All Manuals Search And Download.

Drift Alarm

Drift Alarm sounds when the boat has exceeded the

distance from the boat’s anchored position, based on the menu setting. Drift Alarm

allows you to set the size of a perimeter around the boat’s anchored position; if the

anchored boat drifts outside of that perimeter, the Drift Alarm will sound.

Drift Alarm Circle

Drift Alarm Perimeter

To change the Drift Alarm setting:

1. Highlight Drift Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm

setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only],

Default = Off)

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief

tone will be produced as you adjust the Alarm Tone so that you can select the tone that

you can hear best.

To change the Alarm Tone setting:

1. Highlight Alarm Tone on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone

setting. (High, Medium, Low, Default = Medium)

_{Download from Www.Somanuals.com}74_{. All Manuals Search And Download.}

Setup Menu Tab

From any view, press the MENU key twice to access the

tabbed Main Menu System, then press the RIGHT cursor

key until the Setup tab is selected.

NOTE: Menu choices will vary depending on system settings

such as whether the unit is set for Advanced User mode and

what accessories are attached to the unit.

Setup Menu Tab

Download from Www.Somanuals.com. All Manuals Search And Download.

Units - Depth

Units - Depth selects the units of measure for all depth-

related readouts.

To change the Units - Depth setting:

1. Highlight Units - Depth on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth

setting. (Meters [International Models only], Feet, Fathoms; Default is Meters

for International models, and Feet for Domestic models)

Units - Temp

(International only)

Units - Temp selects the units of measure for all temperature-related readouts.

International Models only.

To change the Units - Temp setting:

1. Highlight Units - Temp on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp

setting. (Celsius, Fahrenheit; Default = Celsius)

Units - Distance

Units - Distance selects the units of measure for all

distance-related readouts, and will appear in the menu if a Temp/Speed Accessory is

connected and the paddlewheel has moved at least once, or if the GPS Receiver is

connected.

To change the Units - Distance setting:

1. Highlight Units - Distance on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance

setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute

Miles; International Models: Meters/Kilometers, Meters/Nautical Miles,

Feet/Statute Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

_{Download from Www.Somanuals.co}7_m6_{. All Manuals Search And Download.}

Units - Speed

Units - Speed selects the units of measure for speed-related

readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the

paddlewheel has moved at least once, or if the GPS Receiver is connected.

To change the Units - Speed setting:

1. Highlight Units - Speed on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed

setting. (kph [International Models only], mph, kts, Default = kph for

International models and mph for Domestic models)

User Mode

User Mode sets the menu system to either Normal or

Advanced. When set to Normal (default setting,) only the basic menu options are

shown. When set to Advanced, additional menu choices are available.

To change the User Mode setting:

1. Highlight User Mode on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode

setting. (Normal, Advanced, Default = Normal)

Language

(International only)

Language selects the display language for menus. International Models only.

To change the Language setting:

1. Highlight Language on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language

setting. (Default = English)

Download from Www.Somanuals.com. All Manuals Search And Download.

Triplog Reset

Triplog Reset resets the Triplog to zero, and will appear in

the menu if a Temp/Speed Accessory is connected and the

paddlewheel has moved at least once, or if the GPS Receiver is connected. The Triplog

provides the following information: timer for elapsed time, distance traveled since last

reset, and average speed.

NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog

information on the screen.

To Reset Triplog:

1. Highlight Reset Triplog on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.

3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor

key once more. To cancel Reset Triplog, press the LEFT Cursor key.

Restore Defaults

Restore Defaults resets ALL menu settings to their factory

defaults. Use this menu choice with caution!

To Restore Defaults:

1. Highlight Restore Defaults on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.

3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT

Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.

_{Download from Www.Somanuals.co}7_m8_{. All Manuals Search And Download.}

Select Readouts

(Advanced, Sonar view only)

Select Readouts sets individual digital readouts

on the Sonar View. This Advanced feature

allows you to select what data will be displayed

in each of 5 fixed-position data windows

arranged around the left and bottom edges of

the Sonar View screen, or whether a particular

window will be turned off, displaying nothing in

that area; you can access this menu choice only

when in Advanced User Mode (see Setup Menu

Tab: User Mode.)

Select Readouts

Data windows can display readouts from supported accessories such as Temp/Speed.

Each data window can either be empty or contain one of the following:

• Course

• Temperature

• Time + Date

• Triplog

• Navigation

• Position

• Speed

• Voltage.

Customized Sonar View

Default Sonar View

_{Download from Www.Somanuals.co}7_m9_{. All Manuals Search And Download.}

To Select Readouts:

1. Make sure you are in Advanced User Mode, then highlight Select Readouts on

the Setup main menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.

3. The Select Readouts submenu will appear, showing a list of all Readouts. Use

the UP or DOWN Cursor keys to select a particular Readout position, then

use the RIGHT or LEFT Cursor keys to change what will be displayed at that

position. (Course, Navigation, Position, Off, Speed, Temperature, Time+Date,

Triplog, Voltage)

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline

or boat's keel. Enter a positive vertical measurement from the transducer to the

waterline to read the depth from the waterline. Enter a negative vertical measurement

from the transducer to keel to read the depth from the keel. This menu choice is

available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting.

(-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu

choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

_{Download from Www.Somanuals.co}8_m0_{. All Manuals Search And Download.}

Speed Calibration

(Advanced, with Temp/Speed only)

Speed Calibration will adjust the speed readout by the percentage entered, and will

appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel

has moved at least once, when the unit is in Advanced User Mode (see Setup Menu

Tab: User Mode.)

To change the Speed Calibration setting:

1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on

the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed

Calibration setting. (-20% to +20%, Default = 0%)

Local Time Zone

(Advanced)

Local Time Zone selects your time zone in reference to the time reported by the GPS

receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select

Readouts). This menu choice is available only when in Advanced User Mode (see Setup

Menu Tab: User Mode).

To change the Local Time Zone:

1. Make sure you are in Advanced User Mode, then highlight Local Time Zone on

the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone

(Default = EST [UTC-5] - Eastern Standard Time).

Download from Www.Somanuals.com. All Manuals Search And Download.

Daylight Saving Time

(Advanced)

Daylight Saving Time adjusts the time display to account for local Daylight Saving Time

when Time+Date is selected as a Digital Readout on the Sonar View (see Select

Readouts). Selecting On adds one hour to the time display adjusted for your local

time zone. Selecting Off leaves the time display as adjusted for your local time zone.

This menu choice is available only when in Advanced User Mode (see Setup Menu

Tab: User Mode).

To change the Daylight Saving Time setting:

1. Make sure you are in Advanced User Mode, then highlight Daylight Saving Time

on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time

On or Off. (Off, On, Default = Off)

Position Format

(Advanced)

Position Format selects the format of the latitude and longitude position display.

This menu choice is available only when in Advanced User Mode (see Setup Menu

Tab: User Mode).

To change the Position Format setting:

1. Make sure you are in Advanced User Mode, then highlight Position Format on

the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.

(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')

_{Download from Www.Somanuals.co}8_m2_{. All Manuals Search And Download.}

Time Format

(Advanced, International only)

Time Format changes the time format used by the unit This menu choice is available

only when in Advanced User Mode (see Setup Menu Tab: User Mode). International

Models only. Time Format selects a 12 hour or 24 hour format for the time of day

displayed when Time + Date is selected as a Digital Readout on the Sonar View (see

Select Readouts).

To change the Time Format:

1. Make sure you are in Advanced User Mode, then highlight Time Format on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12

hour, 24 hour, Default = 12 hour)

Date Format

(Advanced, International only)

Date Format changes the date format used by the unit This menu choice is available

only when in Advanced User Mode (see Setup Menu Tab: User Mode). International

Models only. Date Format selects the format for the date display when Time + Date is

selected as a Digital Readout on the Sonar View (see Select Readouts).

To change the Date Format:

1. Make sure you are in Advanced User Mode, then highlight Date Format on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.

(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)

_{Download from Www.Somanuals.co}8_m3_{. All Manuals Search And Download.}

NMEA Output

(Advanced)

NMEA Output turns the NMEA* output on or off. This menu choice is available only

when in Advanced User Mode (see Setup Menu Tab: User Mode.) NMEA Output should

be turned On if you connect the NMEA Output wires of the GPS Receiver cable to

another NMEA-compatible device, such as an autopilot.

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

The following NMEA sentences are output when NMEA Output is turned On:

DPT- Depth

MTW - Water Temperature

GLL - Lat/Lon Position

GGA - GPS Fix Data

RMC - Recommended Minimum Specific GNSS Data

VTG - Course Over Ground and Ground Speed

ZDA - Time and Date

When navigating, the following NMEA sentences are also output when NMEA Output

is turned On:

APB - Autopilot Sentence B

BWR - Bearing and Distance to Waypoint

RMB - Recommended Minimum Navigation Info

To turn NMEA Output on or off:

1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output

to On or Off (Off, On, Default = Off).

_{Download from Www.Somanuals.co}8_m4_{. All Manuals Search And Download.}

Sonar

Sonar deactivates Sonar and removes the Sonar Views

from the view rotation. (Off, On, Default = On)

To turn Sonar on or off:

1. Highlight Sonar on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sonar to On or

Off (Off, On, Default = On).

_{Download from Www.Somanuals.co}8_m5_{. All Manuals Search And Download.}

Views Menu Tab

From any view, press the MENU key twice to access the

tabbed Main Menu System, then press the RIGHT 4-WAY

Cursor Control key until the Views tab is selected. This

menu tab allows you to set the available views to either

hidden or visible in the view rotation. The view will be

removed from the view rotation if it is set to Hidden and

will be displayed in the view rotation if it is set to Visible.

The following views are available:

• Bird’s Eye View

• Chart View

• Combo View

• Sonar View

• Sonar Zoom View

• 200/83 kHz Split Sonar View

• Big Digits View

• Circular Flasher View

• Self Test

Views Menu

• Accessory Test

• GPS Diagnostic View.

To Change the View Status of Any View:

1. Highlight the View main menu tab.

2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.

3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the

view from Hidden to Visible.

_{Download from Www.Somanuals.co}8_m6_{. All Manuals Search And Download.}

Troubleshooting

Before contacting the Humminbird® Customer Resource Center, please read the

following section. Taking the time to review these troubleshooting guidelines may allow

you to solve a performance problem yourself, and therefore avoid sending your unit

back for repair.

300 Series^TMDoesn’t Power Up

If your 300 Series^TMFishing System doesn’t power up, use the Installation Guide that also

comes with it for specific confirmation details, making sure that:

• The power cable is properly connected to the 300 Series^TMFishing System

control head.

• The power cable is wired correctly, with red to positive battery terminal and

black to negative terminal or ground.

• The fuse is operational.

• The battery voltage of the power connector is at least 10 Volts.

Correct any known problems, including removing corrosion from the battery terminals

or wiring, or actually replacing the battery if necessary.

300 Series^TMDefaults to Simulator with a Transducer Attached

A connected and functioning transducer will cause the newly-started 300 Series^TM

Fishing System to go into Normal operating mode automatically. If, when you power up

the 300 Series^TMFishing System, it goes into Simulator mode automatically, even though

a transducer is already connected, this means that the control head is not detecting the

transducer. Perform the following troubleshooting tasks:

• Using the Installation Guide that also comes with your 300 Series^TMFishing

System, check to make sure that the transducer cable is securely connected to

the 300 Series^TMFishing System. Reconnect if necessary, and power up the 300

Series^TMFishing System again to see if this fixes the problem.

• Replace the non-functioning transducer with a known good transducer if

available and power up the control head again.

• Check the transducer cable. Replace the transducer if the cable is damaged or

corroded.

_{Download from Www.Somanuals.co}8_m7_{. All Manuals Search And Download.}

Display Problems

There are several main conditions or sources of possible interference that may cause

problems with the quality of the information displayed on the control head. Look in the

following table for some symptoms of display problems and possible solutions:

Problem

Possible Cause

The control head loses

power at high speeds.

If the power output of your boat’s engine is

unregulated, the control head may be protecting itself

using its over-voltage protection feature. Make sure

the input voltage does not exceed 20 Volts.

When the boat

moves at higher

speeds, the bottom

disappears or suddenly

weakens, or the display

contains gaps.

The transducer position may need to be adjusted. A

mix of air and water flowing around the transducer

(cavitation) may be interfering with the interpretation

of sonar data. See your Installation Guide for

suggestions on adjusting the transducer position.

Electrical noise from the boat’s engine may be

interfering with sonar reception. See Finding the Cause

of Noise for more information.

There are no fish

detected, even when

you know they are in

the water under the

boat, or sonar readings

seem weak

Sonar readings may be affected if the transducer is not

positioned correctly (i.e. mounted at an angle, not

straight down), or there is some kind of mechanical

interference, either because it is mounted inside a hull

that is too thick for proper sonar transmission, the

bond between the transducer and the hull is not

airtight, or because the transducer is dirty. Check with

your Installation Guide for guidance on re-positioning

the transducer, and make sure the transducer is clean.

or faulty.

Low battery voltage may be affecting the power of

signal transmission.

Electrical noise from the boat’s engine may be

interfering with sonar reception. See Finding the Cause

of Noise for more information.

_{Download from Www.Somanuals.co}8_m8_{. All Manuals Search And Download.}

Finding the Cause of Noise

Electrical noise usually affects the display with many black dots at high speeds, and high

sensitivity readings. One or more of the following sources can cause noise or

interference:

Possible Source of Noise

Other electronic devices

Isolation

Turn off any nearby electronic devices to see if the

problem goes away, then turn them on one at a

time to see if the noise re-appears.

The boat’s engine

To determine whether the boat’s engine is the

source of the noise, increase the RPMs while the

boat is in neutral and stationary to see if the noise

increases proportionately; if noise appears when

you rev the engine, the problem could be the

spark plugs, alternator, or tachometer wiring.

Replace the spark plugs with resistor plugs, install

an alternator filter, or route the control head

power and transducer cables away from the

engine wiring.

Cavitation from the

boat’s propeller

Turbulence created by the propeller can cause

noise; make sure the transducer is mounted at

least 15” (38 cm) from the propeller, and that the

water flows smoothly over the face of the

transducer at all times.

_{Download from Www.Somanuals.co}8_m9_{. All Manuals Search And Download.}

Specifications

Depth Capability .......................................................................................... 1000 ft (330 m)

Power Output ........................................ 300 Watts (RMS), 2400 Watts (Peak to Peak)

Operating Frequency........................................ 200 kHz and 83 kHz DualBeam PLUS^TM

Area of Coverage ............................................................................ 60° @ -10 dB in 83 kHz

20° @ -10 dB in 200 kHz

Target Separation .......................................................................... 2 1/2 Inches (63.5 mm)

Power Requirement .............................................................................................. 10-20 VDC

LCD .................................................................................................................... 320 V x 240 H

Transducer.............................................................................................................. XHS-9-20-T

Transducer Cable Length .................................................................................... 20 ft (6 m)

Current Draw........................................................................................................0.383 Amps

NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual

depth performance may vary due to transducer installation, water type, thermal layers,

bottom composition and slope.

NOTE: Product specifications and features are subject to change without notice.

_{Download from Www.Somanuals.co}9_m0_{. All Manuals Search And Download.}

Glossary

Sonar Terms:

Alarm, Depth: Depth Alarm is a user-controllable, audible alert that sounds when

depth is less than or equal to the setting.

Alarm, Temperature: Temperature Alarm is a user-controllable, audible alert that

sounds when the water surface temperature equals the setting.

Backlight: Backlight is a user-controllable illumination for the LCD for night and low

light use.

Beam (Sonar Beam): A sonar beam is the wide, cone-shaped projection of sound

waves formed as sound travels underwater. See Cone Angle.

Big Digits View: Big Digits View is a Humminbird® feature that displays the sonar

graph and enlarged digital readouts for easy reading from a distance. This is a great

tool when monitoring the digital depth is important - such as with higher boat

speeds, or when viewing the unit from a distance. When speed input is available, the

Big Digits View also shows the TripLog. See TripLog.

Bottom Black: Bottom Black is a Humminbird® feature that "fills in" the area of the

display below the bottom contour. Bottom Black is preferred by some anglers

because of its high contrast and easy readability, even though it can obscure bottom

hardness information.

Bottom Contour: Bottom Contour is the profile of the bottom graphed to the display

as the depth changes.

Bottom Hardness: Bottom Hardness is the density (or composition) of the bottom,

which can often be determined by interpreting the main sonar return. Varying levels

of hardness can be determined by interpreting the "thickness" of the sonar return.

Hard returns appear thin and black, softer returns appear thicker and less black. It is

important to note that a sonar return from a sloping bottom can have the

appearance of a softer bottom.

Cavitation: Cavitation is the effect of air bubbles created as the propeller rotates and

the boat moves through the water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chart Speed: Chart Speed is a user-controllable feature that sets the speed at which

sonar information moves across the display. A faster setting displays sonar information

from more pings and shows more detail, but the information moves quickly across the

display: a slower setting permits viewing of more sonar history, but does not display as

much detail. The best setting is often the user's personal choice.

Cone Angle: The cone angle is the angular measurement of the sonar beam at a

specific dB down point (i.e. -10 dB). See dB Down Point.

Customizable Digital Readouts: Customizable Digital Readouts is a Humminbird®

feature that permits the user to select the specific digital information that appears

in the main Sonar view (i.e. Speed, Temperature, Barometric Pressure, TripLog, etc.)

Dead Zone: The dead zone is the area of the sonar beam that receives the sonar

signal after the main bottom return. Fish and other objects close to the bottom that

fall within the dead zone will probably not be visible in the sonar beam. Precision

sonar beams, such as the Humminbird® 20° beam, have a smaller dead zone than

wider sonar beams.

Decibel: A Decibel is the measurement for sound pressure level, or "intensity" of the

sonar return. See dB Down Point.

dB Down Point: The dB Down Point is the standard decibel level at which the sonar

cone angle is measured, and is written as "@ -10 dB" or "@ -3 dB". Measurements at

smaller down points (bigger negative numbers) indicate that the less intensive

sonar signals are being used for the measurement.

Display, FSTN: FSTN is an acronym for Film Super-Twist Nematic. FSTN is a

monochrome display technology characterized by black, high-contrast pixels. All

monochrome fixed mount Humminbird® products use FSTN technology.

DualBeam PLUS^TM: DualBeam PLUS^TMis a Humminbird® sonar configuration that

uses two sonar beams simultaneously, and combines the information from both

beams into one view by overlapping the data on-screen, or shows each beam

individually side by side, or permits each beam to be viewed individually full screen.

Feature Memory: Feature Memory is a Humminbird® feature that retains the user's

menu settings in permanent memory. Settings are retained even when the unit is

powered off indefinitely.

_{Download from Www.Somanuals.co}9_m2_{. All Manuals Search And Download.}

Fish Arch: A Fish Arch is the apparent "arch" that appears on the display when any

object moves through the sonar cone. The arch results from a gradual decrease in

distance to an object as it moves into the sonar cone. The distance to an object

changes due to the conical shape of the sonar beam, which causes the distance to be

greater at the edges of the beam than at the center of the beam. When this distance

change is graphed on the display, an arch appears.

Fish ID+^TM: Fish ID+^TMis a Humminbird® feature that uses advanced sonar processing

algorithms to determine if a detected object is likely to be a fish. When the sonar

signal from an object meets strict parameters, the unit draws a Fish Symbol (or icon)

and the digital depth of the target. On DualBeam and DualBeam PLUS^TMunits, fish

detected in the narrow center beam are shown as shaded symbols, and fish detected

in the wider beam are shown as hollow symbols.

Fish Symbol: A Fish Symbol is the graphic that is displayed on the screen when Fish

ID+ determines that a sonar return is likely to be a fish. See Fish ID+^TM.

Freeze Frame: Freeze Frame is a Humminbird® feature that pauses the sonar

scrolling so that the image on screen can be studied with greater detail. See Instant

Image Update.

Frequency: Frequency is a measure of the number of sound wave cycles per second

of a sound impulse transmitted underwater. A typical frequency for fishfinders is

200 kHz, which offers a good balance of performance under many conditions. Lower

frequencies, such as 50 kHz, are capable of penetrating to greater depths, but with

less resolution. Higher frequencies, such as 455 kHz, offer greater resolution, but are

limited in depth performance. Humminbird® uses a variety of frequencies that are

optimized for specific applications.

Grayscale: Grayscale is the use of varying shades of gray to represent the strength

of the sonar signal on the display , and is a very intuitive method of presenting

information. Traditionally, the strongest sonar signals are represented in black, and

progressively weaker signals are represented in progressively lighter shades of gray.

Grayscale, Inverse: Inverse Grayscale is a Humminbird® feature that reverses the

correlation of sonar signal strength and the shade of gray typically used to represent

it. The strongest sonar signals are represented by "white", and progressively weaker

signals are represented in progressively darker shades of gray. While somewhat

counter-intuitive, this method makes the sonar images crisper, and has the benefit

_{Download from Www.Somanuals.co}9_m3_{. All Manuals Search And Download.}

of enhancing the apparent sensitivity because the weaker signals appear bolder.

Inverse grayscale works well in very clear water. Debris-laden water often appears as

a lot of clutter on the screen.

Instant Image Update: Instant Image Update is a Humminbird® feature that

updates all the sonar information on the display when Sensitivity and a variety of

sonar settings (Bottom View, Range, etc.) are modified. This differs from the

traditional functionality that only updates the new sonar information collected after

the setting change. Instant Image Update permits more accurate fine-tuning of the

display because the user can see the results on the complete sonar graph. When

combined with the Freeze Frame feature, the user can adjust and understand the

effects of many different sonar settings quickly and easily.

Maximum Depth Menu: The Maximum Depth Menu is a Humminbird® feature that

optimizes performance based on the maximum operational depth set by the user. Many

Humminbird® units can operate across a very broad depth range (up to 2500 feet) which

causes the unit to "look" up to that full depth under some circumstances. Due to the speed

of sound in water, this can result in less responsiveness because the unit has to wait for a

longer period of time to receive the sonar signal. When the Maximum Depth menu is set

to a lower value, the unit only looks up to the setting, which increases the responsiveness

of the unit. This is an important feature for anyone operating in shallower depths!

Noise: Noise is unintentional, external sound waves that interfere with the optimal

operation of sonar. Noise appears as random "dots" on the display, and is caused by a

variety of sources. Electrical noise (from trolling motors, bilge pumps, VHF radios)

typically manifests as a consistent dot pattern. Electrical noise can be isolated by

selectively turning on and off other electrical devices to determine the source. Often re-

routing the power cable, or connecting to an alternative power supply (second battery)

can help overcome electrical noise. Hydrodynamic noise (from propeller and/or hull

cavitation) has a more random appearance and is generally related to boat speed, so

that faster operation results in more noise. Hydrodynamic noise can be overcome by

proper transducer installation. Many Humminbird® products have a Noise Filter menu

setting that allows the user to clear the screen of noise that is difficult to eliminate.

Pixels: Pixels are the "picture elements", or small square blocks, that make up the

image on the LCD. Measured as a vertical by horizontal number (i.e. 640 V x 320 H),

this key specification typically indicates the quality of resolution. In fishfinders, the

total resolution (vertical multiplied by horizontal) is often less important than the

"Vertical Pixel" resolution. See Pixels, Vertical.

_{Download from Www.Somanuals.co}9_m4_{. All Manuals Search And Download.}

Pixels, Vertical: Vertical Pixels are a number of vertical picture elements in a single

column on an LCD display. A greater number of vertical pixels provide finer

resolution of targets detected by sonar. Essentially, a vertical distance (the depth),

when divided by a larger number, breaks that distance into smaller samples, each

representing a smaller area and thus providing more detail. In fishfinders, vertical

pixels are more critical than horizontal pixels because the horizontal axis of the

display represents time, or history. Sonar information on the horizontal axis can vary

greatly, depending on boat speed and the Chart Speed setting. A greater number of

horizontal pixels show more sonar history that the boat has passed through. On

many models, Humminbird® provides the most vertical pixels to provide a better

display resolution. See Chart Speed and Pixels.

Power Output: Power output is the amount of sound energy emitted into the water

by the sonar transmitter. Power output is measured using either RMS (Root Mean

Square) or P-T-P (Peak-to-Peak) measurement systems. Either method is acceptable,

but it is important, when comparing power outputs, to make sure that the same

measurement system is being used for both outputs, because P-T-P numbers are 8

times higher than RMS numbers. Greater power output allows the sonar signal to

penetrate through weeds and thermoclines, reach deeper depths and operate more

effectively in noisy environments, such as when the boat is running at high speed.

Pulse Width (Pulse Length): Pulse Width is the length of time that a sonar sound

burst is transmitted into the water. Shorter pulse widths provide better target

separation, but cannot travel to great depths. Longer pulse widths provide better

depth penetration, but result in poorer target separation. Humminbird® varies pulse

width based on depth to optimize both target separation and depth performance.

See Target Separation.

QuadraBeam^TM: QuadraBeam^TMis a Humminbird® sonar configuration that uses four

sonar beams for a more detailed bottom image. QuadraBeam^TMuses the DualBeam

PLUS^TMconfiguration for downlooking, and also adds two additional beams to look

to the left and right. The sonar beams pointing to the left and right provide the

ability to spot fish and structure over a wide 90° area, and to identify on which side

of the boat they are located. See DualBeam PLUS^TM.

Quick Disconnect Mount: The Quick Disconnect Mounting system is an exclusive

Humminbird® feature that permits the unit to be easily removed from the mounting

base by pressing a release button, and re-installed by simply snapping it back into

_{Download from Www.Somanuals.co}9_m5_{. All Manuals Search And Download.}

place. All cable connections are made when installing, so that no separate wiring

connections are required. Additionally, the mount offers 90° tilt and 360° swivel

capability to adjust the viewing angle of the unit as you move about the boat.

Real Time Sonar: Real Time Sonar is a Humminbird® technology that delivers ultra-

fast sonar transmitter/receiver operation and results in a more detailed

instantaneous view of what is under the boat. The Real Time Sonar window is a

vertical band at the right side of the display that shows the instantaneous sonar

return from the transducer at a particular instant. The RTS® Window menu option

permits the user to adjust the window to show the full sonar signal return, or just a

narrower band that indicates intensity using grayscale. Real Time Sonar relies on

very fast Sonar Update Rate (Ping Speed). See Sonar Update Rate.

Receiver: See Transmitter.

Second Return: The Second Return is a term that describes the appearance of a

second sonar return below the primary sonar return (bottom contour) at exactly

twice the true depth. The second return is caused by the same sonar energy

bouncing off the bottom once, rebounding to the water surface and then traveling

back down to the bottom to be reflected again. Second returns are more common in

shallow water and over hard bottoms; it is actually possible to see a third sonar

return under some circumstances. The second return provides useful information to

help determine bottom hardness, as areas with harder bottoms will generally create

a second return. The second return can be used as a guide to set Sensitivity when in

shallower water.

Sensitivity: Sensitivity is a user feature that adjusts the sensitivity of the sonar

system to show more or less detail in the water. Higher sensitivities are often

preferred, however, when the water contains debris (silt, storm debris, etc.) and it

can be difficult to pick out targets. Conversely, if sensitivity is set too low, relevant

targets may be missed.

SONAR: SONAR is the acronym for SOund and NAvigation Ranging. Sonar

technology uses precision sound bursts transmitted underwater to determine the

distance and other attributes of objects in the water. Distance can be determined

because the speed of sound in water is constant, and the time for the signal to

return is measured. Sound also travels very quickly underwater, making sonar a

responsive, cost-effective tool. Sonar is the basic technology behind all recreational

and commercial fishfinding and depthfinding devices.

_{Download from Www.Somanuals.co}9_m6_{. All Manuals Search And Download.}

Sonar Echo Enhancement: Sonar Echo Enhancement is a Humminbird® feature that

describes the high degree of sonar sensitivity achieved through a combination of

transmitter/receiver and software algorithms. The result of Sonar Echo Enhancement

is to display virtually everything in the water that is of interest to the angler, including

bait fish, game fish, thermoclines, weed beds, subtle structure, and more.

Sonar Update Rate: Sonar Update Rate is the number of times per second that the

transmitter/receiver sends and receives sonar signals. A very fast sonar update rate

collects more information and provides a more detailed image of the bottom, fish

and structure. Many Humminbird® units operate at up to 40 times per second when

in single frequency operation. Due to the limitation of the speed of sound in water,

the update rate begins to slow as depth increases to deeper than 50 feet. In very

shallow water (less than 10 feet), however, update rates as much as 60 times per

second can be achieved.

Speed: Speed is the rate at which the boat moves through the water. Boat speed can

be measured as Speed Over Ground or Speed Through Water. Speed Over Ground is

provided by GPS, and is the measurement of the boats progress across a given distance.

Speed Through Water is provided by a speed paddlewheel, and is the measurement of

the flow past the boat, which may vary depending on current speed and direction.

Speed Through Water is most critical for anglers using downriggers, as it impacts the

running depth of the down riggers. Speed Over Ground is optimal for navigation, as

accurate destination times can be derived from this measurement. Humminbird®

products allow for input and display of both sources.

Structure: Structure is a general term for objects on the bottom that present a

discontinuity and are a likely attractor for fish. This includes bottom contour features

(drop-offs, humps, and holes), standing structure (stumps, timbers, brush piles) and

a wide range of other potential objects (sunken boats, reefs). Humminbird® units

excel at showing structure with great detail over a wider area due to unique sonar

configurations developed for the angler.

Structure ID®: Structure ID® is a Humminbird® feature that describes the traditional

grayscale method of presenting sonar information. See Grayscale.

Surface Clutter: Surface Clutter is a phenomenon where sonar returns are reflected

off of tiny objects near the surface of the water, including algae and even air

bubbles. Typically, saltwater environments have significantly greater surface clutter

_{Download from Www.Somanuals.co}9_m7_{. All Manuals Search And Download.}

than freshwater due to continuous wind and wave action that causes aeration at the

surface. The Surface Clutter menu provides manual control to bias the default

settings under extreme conditions.

Target Separation: Target Separation is the measurement of minimum distance that

a fishfinder needs to be able to recognize two very close objects as two distinct

targets (i.e. two fish hanging very close, or a fish hanging very close to structure).

Humminbird® fishfinders provide a very good 2 1/2 inches of target separation in

shallower than 100 feet of depth. Target separation decreases as depth increases

due to the need for longer Pulse Width to achieve greater depth. See Pulse Width.

Thermoclines: Thermoclines are water layer(s) of distinctly different temperatures

that create a sonar reflection due to the density of the differing water temperatures.

Typically a thermocline will appear as a continuous band across the display at some

distance above the bottom contour. Thermoclines are of interest to anglers because

fish will suspend above or below the thermocline as they seek the optimum

temperature and oxygen levels.

Time Variable Gain: Time Variable Gain is a processing step applied to the sonar

return to "normalize" the data so that objects of equal size (i.e. fish) appear to be the

same size, even if they are separated by a good distance. Time Variable Gain is a

fundamental attribute of good sonar, but is often promoted as a feature.

Total Screen Update®: A Humminbird® feature that refreshes and updates all the sonar

information on the display when a range change occurs. Without Total Screen Update®,

only the most recent sonar information would be drawn to the new range, and the old

sonar information would continue to scroll off the screen at the old range.

Transducer: The transducer is part of the sonar system, which mounts on the boat

and is in contact with the water, that converts the electrical energy from the

transmitter into sound energy, and that forms the sonar beam in turn. Internally, the

transducer consists of one or more piezo electric disks that expand by very minute

amounts to create the sound wave. This element also works in reverse, converting

the returned sound energy back into an electrical signal that the receiver interprets.

Transducers are available for many specific mounting applications for the boat, such

as a transom mount, trolling motor mount, etc. Humminbird® offers many

sophisticated transducers, often with multiple piezo electric elements designed to

form specifically-shaped sonar beams, providing the angler with superior tools for

finding and catching fish. See Transmitter and SONAR.

_{Download from Www.Somanuals.co}9_m8_{. All Manuals Search And Download.}

Transmitter: The transmitter and receiver are matched parts of the sonar system that

send (transmit) and listen to (receive) the sonar signals, and work in conjunction with

the transducer. Humminbird® transmitters have an extremely fast cycling design that

can send signals up to 60 times per second, as well as produce the varying levels of

power output needed for different depths and conditions. Additionally, the transmitter

has the capability to create very precise sonar pulses needed for a high degree of target

separation. Humminbird® receivers are extremely sensitive, but within a narrow

"bandwidth" to discriminate against noise from external sources. Additionally, the

receiver offers a wide "dynamic range" which provides the ability to receive very strong

signals alternating with very weak signals, without the strong signal overwhelming the

weak signal. See Transducer and Noise.

TripLog: TripLog is a Humminbird® feature that provides an on-screen counter for

Elapsed Time, Average Speed and Total Distance traveled, and requires a speed input

to activate the feature. TripLog appears on the Big Digits View, and can be reset to

zero through the TripLog menu.

TrueArch®: TrueArch® is a Humminbird® feature that provides true fish arches, not

artificial arches or symbols. Humminbird® units are capable of producing fish arches

due to the wide 60° sonar beam of DualBeam PLUS^TM, an extremely sensitive sonar

receiver. See Fish Arch.

Viewing Angle: Viewing Angle is an attribute of an LCD that characterizes visibility

of the display when viewing from off the central access, such as when standing to

the side of the fishfinder. Wider viewing angles are better because the information

remains visible even when viewing from the side.

WhiteLine®: WhiteLine® is a Humminbird® feature that highlights the strongest

sonar return on the display using a very light gray band. This is preferred by some

anglers who have grown accustomed to the feature on paper graph chart recorders.

WideSide®: WideSide® is a Humminbird® sonar configuration used in an optional

transducer. WideSide® uses three sonar beams pointing to the left, right and down.

Beams pointing to the left and right are effective for spotting fish and structure near

the surface or on the bank. The downlooking beam provides depth information

directly below the boat.

X-Press^TMMenu: X-Press^TMMenus are a Humminbird® feature that make the most

commonly-used menu selections available with one press of the MENU key. Items that

_{Download from Www.Somanuals.co}9_m9_{. All Manuals Search And Download.}

appear on the X-Press^TMMenu are related to the current view, and present the most

logical choices for that view. Sonar View X-Press^TMmenus will differ from Chart View

X-Press^TMmenus, etc. X-Press^TMmenus are one of the principal reasons that

Humminbird® products are easier to use.

Zoom: Zoom is a feature that focuses in on a smaller area of the bottom to provide

enhanced resolution. With enhanced resolution, the angler can more easily see fish

hanging in structure or multiple fish hanging close together. Split screen zoom divides

the display into the full range view on the right, and the zoomed view on the left.

Humminbird® offers One-Touch® Zoom which allows the zoom feature to be easily

accessed from the regular sonar view with just one key press, eliminating the need to

use menus to access the feature.

Zoom, Bottom Lock: Bottom Lock Zoom is a feature that focuses on a smaller area just

above the bottom to provide enhanced resolution. Unlike regular zoom, it continuously

graphs the bottom at a constant point on the display regardless of changes in depth.

This "flattens" out the bottom contour, but is effective at showing fish on or near the

bottom, and is preferred by many saltwater anglers.

GPS & Navigation Terms:

Acquisition Time: The length of time that a GPS receiver typically takes to determine a

position from at least three satellites. Humminbird® GPS receivers provide very fast

acquisition times (under one minute), permitting users to get out on the water faster.

Alarm, Arrival: The audible alert that sounds when the boat is equal to or less than the

alarm setting (25 feet–3000 feet) from the location of the destination waypoint.

Alarm, Drift: Drift Alarm is an audible alert that sounds when the boat is equal to or over

the alarm setting (25 feet–3000 feet) from the location where the alarm was turned on.

Alarm, Off-Course: Off-Course Alarm is an audible alert that sounds when the boat’s

distance from the intended Track, (Cross Track Error), is equal to or over the alarm setting

(25 feet – 3000 feet). See Track and Cross Track Error.

Altitude: Altitude measures height above sea level. Altitude is a measurement that can

be provided by GPS.

100

Download from Www.Somanuals.com. All Manuals Search And Download.

Bearing (BRG): Bearing is the direction to a destination waypoint measured in degrees

from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West).

Chartplotter: Chartplotter describes a navigation device that shows Present Position

on a Map, along with Tracks, Waypoints, and Routes. All Chartplotters are also

considered Trackplotters. All Humminbird® GPS Combo units are Chartplotters. See

Trackplotter.

Cold Start: Cold Start refers to the procedure that a GPS receiver must perform when

it does not have historical information regarding its current location. This procedure

typically lasts for several minutes, and may be experienced upon first power up of

the receiver, or if the receiver has been moved a great distance.

Course Over Ground (COG): Course Over Ground is the current direction the boat is

traveling measured in degrees from North (i.e. 321°, where 000° is North, 090° East,

180° is South, 270° is West). When the Course Over Ground is equal to Bearing, the

boat is said to be “On Course” and will arrive at the destination in the most efficient

manner. COG is often confused with Heading. See Heading.

Cross Track Error (XTE): Cross Track Error is the straight-line distance of the boat from

the intended Track. XTE measures how far the boat is off course, and also triggers the

Off Course Alarm. See Track.

Differential GPS (DGPS): Differential GPS is a system to improve the position

accuracy of the Department of Defense GPS through the use of secondary

“correction signals” broadcast from ground stations around the coastal United

States and on some inland waterways. These correction signals are provided by the

USCG and received by an auxiliary Differential Beacon Receiver (DBR) that connects

to the GPS receiver. The advent of WAAS has largely negated the need for the added

expense of a DBR in the United States.

Distance To Go: Distance To Go is the straight-line distance between Present

Position and the Destination Waypoint. DTG and SOG (Speed Over Ground) are used

to calculate Time To Go. See Time to Go and Speed Over Ground.

Estimated Position Error (EPE): Estimated Position Error is a calculation that indicates

the potential position inaccuracy the user may experience due to a variety of GPS factors

which include satellite position in the sky, signal strength and others factors.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Fix Type: Fix Type indicates whether the GPS receiver is providing 2D fix or 3D fix. A

2D fix requires only three satellites and provides only latitude and longitude. A 3D fix

requires four or more satellites, and provides latitude, longitude and altitude.

GPS: GPS is an acronym for Global Positioning System. GPS provides accurate

position (latitude, longitude, altitude) information virtually anywhere on the earth

through satellite technology and personal receivers on the ground. A series of

geosynchronous satellites broadcast a unique signal toward the earth once per

second. A GPS receiver, such as that included with many Humminbird® products,

receives the signals from these satellites and is able to determine position based on

very slight differences in the time each signal is received and the receiver’s

knowledge of the location of each of the satellites.

Heading: Heading describes the direction the boat is pointing and is measured in

degrees (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). Due to

wind and waves, the boat is often traveling in a slightly different direction than it is

heading, and therefore Heading is often confused with Course Over Ground. See

Course Over Ground.

Map Datum: A Map Datum refers to a particular survey of the earth’s surface that

was referenced when creating a chart (i.e. WGS84). Since the earth is not flat, and

not even consistently round, a mathematical model must be used to translate

coordinates from the sphere of the earth to the flat surface of a chart. This

mathematical model is the Map Datum. Historically, many different Map Datums

have been used around the world to create maps; often a reference to the Map

Datum can be found in the legend of a paper map. It is important to select the

correct Map Datum setting in your fishfinder when comparing GPS position to a

paper chart to avoid slight position inaccuracies. Almost all electronic charts use the

WGS84 Map Datum and therefore, they do not require setting changes.

MMC: MMC is an acronym for Multi Media Card. An MMC is a postage stamp-sized

memory device used to store electronic data such a maps, waypoints, routes and

other information. MMC is a very rugged format suitable for the marine

environment, but it is not waterproof. The MMC is removable from Humminbird®

products, and can be used in a PC that is equipped with an appropriate card reader.

MMC is the same format that many digital cameras use. See SD.

102

Download from Www.Somanuals.com. All Manuals Search And Download.

North, Magnetic: North is the principle reference point of the compass (i.e. North is

000°). Magnetic North relies on the earth’s magnetic field to align a metal pointer

generally towards True North. However, due to local variations in the earth’s

magnetic field around the globe, the difference between True North and Magnetic

North can be greater than 10°. See True North.

North, True: North is the principle reference point of the compass (i.e. North is 000°).

True North uses the axis of the rotation of the earth as the reference for North and

is constant for all points on the earth. Most GPS units default to True North as the

setting. The GPS heading may vary from the boat compass heading because the

compass uses Magnetic North. Humminbird® GPS units provide the option of

selecting True or Magnetic readouts by using the North Reference menu. See

Magnetic North.

Present Position: Present Position is the current location (latitude, longitude)

determined by GPS. The Present Position is indicated on-screen by a directional boat

icon if the boat is moving, or a round symbol if the boat is stationary.

Route: A Route is series of waypoints linked together in a specific sequence to define a

navigation path between two points, and saved in the fishfinder’s memory. Routes are

often used when frequently traveling between two or more locations because it is a faster

and more accurate method than repeatedly selecting individual waypoints each time one

travels through the same area. Routes consist of a Start Waypoint, an End Waypoint, and a

series of waypoints in between. Users can begin navigation at the beginning, the end (to

run the route in reverse) or at any waypoint in between. See Waypoint.

SD: SD is an acronym for Secure Digital. An SD card is virtually identical in function

to an MMC; however, the speed at which information can be accessed is generally

faster, the storage capacity is generally larger, and the card has security features

which can be used to prevent extracting the data from the card. SD is the same

format that many digital cameras use. See MMC.

Selective Availability: Selective Availability (SA) is a GPS system “feature” that can be

implemented by the U.S. Department of Defense (DoD) to degrade the accuracy of GPS

positioning information. With SA active, the GPS is accurate to within 100 meters 95%

of the time. With SA inactive, the GPS is accurate to within 45 meters 95% of the time.

Currently, SA is inactive and the consumer can enjoy the greater precision GPS

provides; however, the DoD reserves the right to activate SA at any time.

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Speed Over Ground (SOG): Speed Over Ground is the measurement of the boat’s

progress across a given distance, and is the speed measurement provided by GPS. An

alternate, Speed Through Water, is provided by a speed paddlewheel, and is the

measurement of the flow past the boat, which may vary depending on current

speed and direction. Speed Over Ground is optimal for navigation because accurate

destination times can be derived from this measurement. Humminbird® products

allow for input and display of both speed measurements.

Time To Go (TTG): Time To Go is the estimated time required to reach the destination

waypoint. TTG is calculated using the SOG and DTG. See SOG and DTG.

Track: A Track is a series of saved points that define the past path of the boat. These Track

Points are saved at regular time intervals. Tracks are a useful and quick method to see

where you’ve been, and an easy guide to follow to get you back to the starting point.

Generally, all GPS units have a limited number of Track Points that can be saved before the

unit runs out of memory and begins erasing the first track points saved. Because of this,

the user can adjust the Track Point Interval menu to increase the amount of time between

when points are saved, and thus extend the distance covered by a track. Tracks can also

be permanently saved to memory, and re-displayed at the user’s option.

Track Line (TRK): The Track Line is the desired line of travel between two waypoints,

and represents the most efficient path between the two points because it is a

straight line. The TRK is measured in degrees (i.e. 321°, where 000° is North, 090°

East, 180° is South, 270° is West). See Cross Track Error and Course Over Ground.

Trackplotter: Trackplotter describes a navigation device that shows Present Position,

along with Track, Waypoint, and Routes, but NO MAP in the background. See Chartplotter.

Trolling Grid: Trolling Grid is a Humminbird® feature that displays a precise

reference grid around a waypoint. This grid is used as a guide pattern for trolling

around a specific area to assure a more efficient and complete coverage of that area.

Trolling Grid resolution be changed by zooming in or out on the chart. The Trolling

Grid can also be rotated on the display to orient it for optimal boat course for wave

and wind conditions.

UTC: UTC is an acronym for Universal Time Constant. UTC is the “standard time” used in

navigation, and is the local time in Greenwich England. (UTC is equivalent to Greenwich

Mean Time (GMT)). To display the correct Local Time in a Humminbird® GPS unit, the

user must use the Local Time Zone menu and select the time zone (i.e. EST, CST).

WAAS: WAAS is an acronym for Wide Area Augmentation System. WAAS is

104

Download from Www.Somanuals.com. All Manuals Search And Download.

complementary technology to GPS that provides enhanced accuracy through

correction signals broadcast from Federal Aviation Administration WAAS satellites

stationed over the USA. These secondary signals are automatically received by the

standard Humminbird® GPS Receiver. With WAAS signal, GPS accuracy is improved

to within 3 meters 95% of the time. Outside the United States, regional

governmental coalitions have created similar systems such as EGNOS (Europe) and

MSAS (Japan).

Waypoint: A Waypoint is the saved location (latitude, longitude) of a point of

interest that is stored in a GPS receiver’s memory. This can include a marker buoy,

dock, fishing hole or anywhere else the user may want to return to. Humminbird®

products offer the ability to name and assign a symbol to the saved location. Depth,

Date and Time of Day when the waypoint was created is also saved.

Waypoint Target: Waypoint Target is a Humminbird® feature that displays a precise

“bull’s eye” around a selected waypoint. This bull’s eye is used to easily monitor boat

position relative to a waypoint, and is useful for fishing over submerged structure.

With Waypoint Targets, a quick look at the screen lets you know how far off the

waypoint the boat has drifted.

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

106

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

108

Download from Www.Somanuals.com. All Manuals Search And Download.

Contact Humminbird®

Contact the Humminbird® Customer Resource Center

in any of the following ways:

By Telephone:

(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):

1-800-633-1468

By e-mail:

(typically we respond to your e-mail within three business days):

[email protected]

For direct shipping, our address is:

Humminbird

Service Department

678 Humminbird Lane

Eufaula, AL 36027 USA

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Graco Inc Webcam 313872n User Manual
Grundig Electric Shaver MT 6740 User Manual
Harbor Freight Tools Ventilation Hood 94519 User Manual
Harman Kardon MP3 Docking Station BRIDGEIII User Manual
Hearth and Home Technologies Indoor Fireplace Caliber User Manual
Heath Zenith Home Security System SL 9525 User Manual
HP Hewlett Packard Portable Multimedia Player MP200 User Manual
Humax Flat Panel Television LDE 19DST User Manual
iHome MP3 Docking Station iP29 User Manual
Impex Exercise Bike H2502C User Manual