Digital Satellite Receiver
IRDETO Embedded
IRCI-ACE
User's Manual
The product image may differ from the actual product.
HUMNO-IRCIACE.300GB/FA/AR
Download from Www.Somanuals.com. All Manuals Search And Download.
**
The product has been manufactured to satisfy international safety standards. Please read the following safety precautions
and warning carefully.
**
•
•
•
Disconnect the product from the mains before you start any maintenance or installation procedures.
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
The product should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as
vases, should be placed on the apparatus.
•
•
•
•
•
Do not stand the product on soft furnishings or carpets. Do not stack electronic equipments on top of the product.
Do not use any unsupported attachments as these may be hazardous or cause damage the product.
Disconnect the product from the mains before connecting or disconnecting the cable from the antenna or TV.
The LNB cable must be earthed to the system earth for the satellite dish.
Place the product indoors to avoid exposing it to lightening, rain or sun. Do not place it near a radiator or heat register. Make sure it
has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR.
Do not block these openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface. If you place
the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's
instructions for mounting.
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product can cause serious
injury to a child or adult, and serious damage to the appliance.
•
Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for
long periods of time.
•
•
Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or
those that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit.
GB 2
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1. Before Using the Product
GB5
**
1.1 Package Contents
1.2 Front Panel
GB5
GB6
1.3 Rear Panel
GB7
1.4 Conditional Access
1.5 Remote Controller
GB8
GB10
GB12
2. Setup
**
2.1 Connecting Antenna/TV
2.2 Connecting Hi-Fi System
2.3 Powering On
GB12
GB13
GB14
GB15
3. Installation
**
3.1 Selecting Language
3.2 Searching Services
3.3 Common Interface
3.4 Default Setting
GB15
GB15
GB21
GB21
GB22
4. Basic Operation
**
4.1 Viewing Programme
4.2 Changing Language
4.3 Teletext
GB22
GB23
GB23
GB24
4.4 Setting Property of Service
GB 3
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5. Service List
5.1 Switching Services
GB25
**
GB25
GB26
GB27
GB28
GB29
GB31
5.2 Organising Services
5.3 Organising Favourite Services
5.4 Organising Satellites
6. Programme Guide
7. Setting Preferences
**
7.1 Parental Control
7.2 System Setting
GB31
GB31
GB33
GB34
GB35
GB37
GB39
GB40
8. System Information
9. Utility
10. Software Update
11. Troubleshooting
12. Specification
13. Service and Support
GB 4
Download from Www.Somanuals.com. All Manuals Search And Download.
**
This chapter provides detailed instructions on the product and its accessories.
1.1 Package Contents
When you unpack your package contents, make sure you have all the necessary items shown in figure below. If any of items is missing
or damaged, please contact your product dealer for replacement.
**
**
Remote Controller
Batteries
User's Manual
RCA Cable
**
**
**
**
**
Note: The product image may differ from the actual product.
GB 5
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.2 Front Panel
**
**
1. STANDBY Button
5. RADIO LED
**
**
Switches between Operation and Standby modes.
Amber light is emitted when the product is in Radio mode.
**
**
2. VOL Button
6. STANDBY LED
**
**
Display the volume bar.
Red light is emitted when the product is in standby mode.
**
**
3. CH-/CH+ or VOL-/VOL+
7. SMART CARD SLOT
**
**
Moves the TV/Radio service or volume up/down.
Slot for a smart card.
**
**
4. TV LED
8. CAM SLOT
**
**
Green light is emitted when the product is in TV mode.
For a CA Module with a smart card.
**
**
Note: See 1.4 Conditional Access when you insert the smartcard or the CAM.
GB 6
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.3 Rear Panel
**
**
1. LNB IN
5. AUDIO L/R
**
**
Connects a satellite antenna cable.
Connects to your TV or VCR and output Audio signals.
**
**
2. LNB OUT
6. RF IN
**
**
Connect other digital satellite receiver.
Connect a general aerial antenna with the cable jacks to
**
the RF input jack on the product.
3. RS-232C
**
**
7. RF OUT
Connects to your PC to update product’s software
programme.
**
Connect a RF signal from the product to RF input jack
**
on your TV.
4. VIDEO
**
**
8. S/PDIF
Connects to your TV or VCR and output Video signals.
**
**
Outputs the digital audio signals (S/PDIF)
GB 7
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.4 Conditional Access
Although some TV and Radio services are free to air, most TV and Radio/Music services are available on a subscription basis and can
only be enjoyed via Conditional Access component. The Conditional Access component is removable Smartcard and Common
Interface CAM.
**
Inserting Smartcard
**
A Smartcard looks similar to a credit card and entitles you to view and listen to all the services you choose to subscribe to. The
Smartcard slot on the product can be used for Irdeto Smartcard only.
**
1. Open the right-hand flap on the front panel of the product.
2. Hold the Smartcard horizontally with the electronic chip (generally small square, gold in colour) facing upwards.
3. Insert the Smartcard into the top slot until the card is completely in.
**
GB 8
Download from Www.Somanuals.com. All Manuals Search And Download.
**
**
Inserting Common Interface CAM
**
Your receiver is equipped with slot of Common Interface(CI).
**
1. Open the right-hand flap on the front panel of the product.
2. Insert the smart card into the CI module, and CI module into the slot.
**
**
GB 9
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1.5 Remote Controller
1. SOURCE
**
Selects the input source between TV and product.
**
2. TV/RADIO
**
Switches between TV and Radio modes.
**
3. NUMERICAL BUTTONS
**
Enters a TV/Radio service number or menu option
number.
**
4. MENU
**
Displays the main menu.
**
5. TIME - WHITE
**
Displays the current time on the screen. To set the
current time, refer to 7.2 System Setting.
**
6. ARROW BUTTONS
**
Change services or move the cursor to the up, down,
left or right menu option.
**
7. i (INFORMATION) - RED
**
Displays the information about the service and
programme.
**
8. SOUNDTRACK - GREEN
**
Displays the soundtrack list where available.
GB 10
Download from Www.Somanuals.com. All Manuals Search And Download.
**
9. CH - / CH +
17. ZOOM - BLUE
**
**
Changes the Service.
Enlarges the picture.
**
**
10. RECALL
18. SUBTITLE - YELLOW
**
**
Returns to the previous screen.
Display the subtitle language list where available.
**
**
11. FREEZE
19. V - / V +
**
**
Freezes the TV screen you are watching. Play the
Adjusts the audio volume.
**
audio continuously.
20. MUTE
**
**
12. WIDE
Pauses the audio temporarily. That is, volumes on/off
**
Changes the Display Format.
temporarily.
**
**
13. STANDBY
21. UHF
**
**
Switches between Operation and Standby modes.
Displays the UHF menu.
**
**
14. GUIDE
22. ? (HELP)
**
**
Displays the Programme Guide.
Displays the Property of Service on the screen.
**
Please refer to 4.4 Setting Property of Service.
15. EXIT
**
**
** COLOUR BUTTONS (R/G/B/Y/W)
Returns to the previous menu and exits all OSD
**
screens.
Select color keys for interactive applications.
**
16. OK
**
Selects a menu or confirms the selection. Displays
the service list during watching a programme.
GB 11
Download from Www.Somanuals.com. All Manuals Search And Download.
**
This chapter describes how to set up the product. Select the most appropriate procedure depending on your case. Before you connect
the product to any other equipment, you must disconnect all the equipment from their power sources.
Note: If you encounter any problem when setting up the product, please contact your local product distributor.
2.1 Connecting Antenna/TV
**
**
1. Connect an Antenna to LNB IN on the product.
2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable.
3. Connect AUDIO L/R on the product to AUDIO IN L/R on the TV using the RCA cable.
GB 12
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2.2 Connecting Hi-Fi System
**
**
1. Connect an Antenna to LNB IN on the product.
2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable.
3. Connect AUDIO L/R on the product to AUDIO IN L/R on the Audio System using the RCA cable.
4. If you wish to connect the optical S/PDIF terminal and Dolby digital decoder to listen digital audio, connect as above.
GB 13
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2.3 Powering On
**
1. Connect the power cord of the product to a wall outlet.
**
**
2. Press the STANDBY button on the front of the product or on the remote controller.
**
GB 14
Download from Www.Somanuals.com. All Manuals Search And Download.
**
3.1 Selecting Language
When powering on your product for the first time after purchasing, the Selecting Language screen is automatically displayed. Select
your desired language using the
button and press the OK button. The following procedure is HUMAX Auto Search. For
information about it, refer to 3.2 Searching Services.
3.2 Searching Services
To search services, go to Service Searching menu (MENU-INSTALLATION-SERVICE SEARCHING).
**
**
Menu structure varies according to an item and its operation. You can easily navigate the menu using the following instructions:
**
1. Press the MENU button to display the main menu screen.
2. Select your desired item using the
3. Press the OK button to move from the menu to the sub-menu.
4. Press the button to select option values.
5. Press the NUMERICAL button to enter the option values.
button.
6. Press the
button to open the option list and press the EXIT button to close the option list.
7. Press the EXIT button to return to the parent-menu.
8. Press the MENU button to exit the menu screen.
Note: Some menu items are access controlled. When accessing to the protected menu, you will be prompted to enter the Pin
Code. Enter your Pin Code using the NUMERICAL button. The default Pin Code is set to “1234”.
GB 15
Download from Www.Somanuals.com. All Manuals Search And Download.
**
1. HUMAX Auto Search
If your product is connected to the antenna and television, you can automatically search services without entering any other
information.
Warning:
Please note that once you perform HUMAX Auto Search, all data such as Antenna setting information channel lists and
smart card information you already set are deleted.
When you select this menu, you can view the window asking if you have a motorized dish. If you wish to stop the operation, press the
EXIT button. If you do not have a motorized dish, select No, and press the OK button. Then, the product will search services. Wait a
moment until the operation is completed. After completing search operation, the result window will be displayed. If no satellite is
detected, you can select Continue or Retry. If you select Retry, the product will search services again. If you select Continue, you can
return to the Service Searching menu.
If you have a motorized dish, select Yes, and press the OK button. The Antenna Setting menu will be displayed. The configuration of
antenna is described in the following.
**
GB 16
Download from Www.Somanuals.com. All Manuals Search And Download.
**
2. Antenna Setting
You can set antenna and LNB information to search services.
**
•
•
Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is
predefined for SMATV.
Satellite Name: Displays the satellite list ordered by name. If the desired satellite name is not listed, then select User Defined. You
can enter the Satellite Name using the keyboard displayed on the screen.
•
•
•
LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB.
22KHz Tone: When using the 22HKz tone switch, select Enabled. Otherwise, select Disabled.
DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select
DiSEqC input to connect to antenna or LNB.
•
•
Motorised System: When using motorised system, select Enabled. Otherwise, select Disabled. When Motorised System is set to
Enabled, DiSEqC Input is disabled.
LNB Voltage: You can select Standard voltage or High voltage.
•
LNB Power: You can turn LNB Power on or off.
**
When you complete the settings, press the OK button to move to the Manual
Search menu.
GB 17
Download from Www.Somanuals.com. All Manuals Search And Download.
**
3. Manual Search
You can search services of the selected satellite by transponders if you know the transponder information.
**
•
Antenna Alternative: Select antenna alternative which has different
combinations of settings for search. Antenna Alternative 16 is predefined for
SMATV.
•
•
•
•
•
Frequency: Enter transponder frequency.
Polarisation: Select the type of polarisation.
Symbol Rate: Select or enter transponder symbol rate.
FEC: Select FEC (Forward Error Correction).
Network Search: If you want to search services for multiple transponders,
select Yes. Otherwise, select No.
•
Automatic Skip: When skipping all scrambled service search, select Yes.
Otherwise, select No.
•
Advanced: In advanced mode, enter Video Packet ID (PID), Audio PID,
and PCR PID.
**
After setting the parameters of search, press the OK button to start service search. Wait a moment until the operation is completed.
After finishing search operation, the result window will be displayed. You can delete the services using the and RED button.
To cancel deleting operation, press the RED button again. The screen also shows the information of the number of the found services
and transponder.
To save the found services, press the OK button.
**
Note:
•
If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at the bottom of the screen, are
generally moved up.
•
Press the EXIT button to stop search operation.
GB 18
Download from Www.Somanuals.com. All Manuals Search And Download.
**
4. Satellite Setting
This menu appears only when you enable Motorised System in Antenna Setting menu and press the OK button while Antenna
Alternative in Manual Search menu is selected.
**
•
•
Satellite Name: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select OTHER.
Movement: In user mode, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position
of the satellite manually.
•
Motor Control: You can select one option among Search, Goto, Store, or
Reset.
**
- Search: Searches for services on the selected transponder.
- Goto: Moves the motor to the saved position of the selected satellite.
- Store: Saves the current position of the motor for the selected satellite.
- Reset: Resets all saved positions of the motor relative to the 0 position.
(Installer Mode Only)
•
DiSEqC Command Mode: Select Installer or User mode.
**
The following table shows the value of the motor setting options.
**
DiSEqC Command Mode
Movement
Motor Control
Installer
User
East / Stop / West
Search / Goto / Store / Reset
Search / Goto / Store
Stop(60E) ~Stop(0) ~Stop(60W)
GB 19
Download from Www.Somanuals.com. All Manuals Search And Download.
**
To initialise satellite position saved at the Motor Antenna, set DiSEqC Command Mode to Installer, set Motor Control to Reset, then
press the OK button. You will see a warning message. To continue the procedure, press the OK button.
To set the motor position for each satellite manually, select your desired Satellite Name, set DiSEqC Command Mode to Installer, and
then set Movement to one option among East, Stop, or West. The motor starts moving. The level of signal strength and quality bar at
the bottom of the screen will indicate the best position of the dish. Set Motor Control to Store when you find the best position, then
press the OK button to save the position.
To move the motor to the pre-set position of the satellite, select your desired Satellite Name, set DiSEqC Command Mode to User, set
Motor Control to Goto, and set Movement to your desired value. The movement is used to fine-tune the position of the motor. Press the
OK button. The motor will move to the position of the selected satellite.
**
5. Motor Limit Setting
To enter this menu, press the RED button in Satellite Setting menu. You can set the maximum for both East and West to prevent
damage to the antenna.
**
•
Limit Setting: When Limit setting is set to Enabled, the motor does not
move more than the amount of the limit. When Limit setting is set to
Disabled, the setting is released.
•
•
•
Movement: You can select one among East, Stop, or West.
Store East Limit: You can save the East Limit.
Store West Limit: You can save the West Limit.
GB 20
Download from Www.Somanuals.com. All Manuals Search And Download.
**
6. Automatic Search
If you select the satellite to search services according to the Antenna Setting, you can automatically search the service without entering
any other information.
To enter Automatic Search menu, press the MENU button, then select INSTALLATION-SERVICE SEARCHING-MANUAL
SEARCH-AUTOMATIC SEARCH.
**
•
Antenna Alternative: Select antenna alternative which has different combinations of settings for search. The Satellite Name is
automatically displayed. Antenna Alternative 16 is predefined for SMATV.
•
•
Automatic Skip: When skipping all scrambled service search, select Yes. Otherwise, select No.
Search Type: If you want to search services through all field of tuner (950~2150MHz), select Detail. Otherwise, select Quick to
search services with the preset parameters. In detail mode, you can add the desired Symbol Rate.
Network Search: If you want to search services for multiple transponders, select Yes. Otherwise, select No. When you complete
the setting, press the OK button to start service search.
•
**
Note: The menu structure may vary according to the type of the receiver.
**
3.3 Common Interface
You can view the current status of CI module using the Common Interface menu (MENU-INSTALLATION-COMMON INTERFACE).
**
3.4 Default Setting
You can restore the product to the factory settings using the Default Setting menu (MENU-INSTALLATION-DEFAULT SETTING). After
completing the default setting, the Selecting Language screen will be displayed. For more information, refer to 3.1 Selecting Language.
**
Warning: Please note that once you perform Default Setting, all data will be restored to the factory settings except customised
password.
GB 21
Download from Www.Somanuals.com. All Manuals Search And Download.
**
4.1 Viewing Programme
You can change a service into your desired service using the CH-/CH+,
, or NUMERICAL button. You can also use the Service
List or Programme Guide.
You can adjust the audio volume using the V-/V+ or
button.
**
Programme Information (i-plate)
**
i-plate which is also called Information Box is always displayed for a specific period of time whenever you switch services. You can
view the programme information by pressing the i button while watching a programme. You can see the detailed information about the
current programme by pressing the i button twice. If the detailed information is more than one page, use the
previous or next page. Press the EXIT button to hide the i-plate.
button to move to the
You can adjust the duration time of i-plate in MENU-INSTALLATION-SYSTEM SETTING-OTHER SETTING-INFO.BOX DISPLAY
TIME.
**
GB 22
Download from Www.Somanuals.com. All Manuals Search And Download.
**
4.2 Changing Language
If the current programme provides subtitle information, the subtitle icon will appear on the i-plate. You can select the language for the
subtitle using the SUBTITLE
button. You can select a default subtitle language and set whether or not to display the subtitle in
MENU-INSTALLATION-SYSTEM SETTING-LANGUAGE SETTING-SUBTITLE LANGUAGE/SUBTITLE DISPLAY.
If the current programme is available in multiple audio languages, you can select the language that you wish to listen in using the
SOUNDTRACK
button. You can select a default audio language in MENU-INSTALLATION-SYSTEM SETTING-LANGUAGE
SETTING-AUDIO LANGUAGE.
You can also select a default OSD language in MENU-INSTALLATION-SYSTEM SETTING-LANGUAGE SETTING-MENU
LANGUAGE.
4.3. Teletext
When the service supports teletext, the teletext icon is displayed on the I-plate. To enter Teletext mode, use the SUBTITLE
button to display teletext.
To display teletext menu, press the MENU button in teletext mode. Select your desired teletext function using the
button and press
the OK button. To view the teletext page, use the CH-/CH+,
, RECALL, or NUMERICAL button.
**
Teletext Functions
**
Index
Return to index page. If there is no index page, jump to page 100.
Sub-page
Search the sub-page using the sub-code written by users. If it’s not in the teletext mode, display the
current time.
MIX
Adjusts transparency of teletext screen.
Hides the teletext except page number.
Displays the concealed information.
Cancel
Reveal
Double Size Displays the text size as double size.
Page Hold Holds the current page not updating it.
GB 23
Download from Www.Somanuals.com. All Manuals Search And Download.
**
4.4 Setting Property of Service
You can add the current service to Favourite group. In addition, you can lock,
unlock, skip, or delete the current service while watching a programme.
The operation is as follows:
1. Press the OK button while watching a programme. The service list will
appear on the screen.
You can also display the service list using the MENU-SELECT
SERVICE-SIMPLE (or ADVANCED).
2. Press the MENU button while the service list is displayed.
3. Select your desired item (Favourites/Lock or Unlock/Skip/Delete) using
the
button, and press the OK or
button.
4. After setting property of a service, press the OK button to save the changes.
Note:
•
•
•
In case of unlocking a service, you will be prompted to enter your Pin Code. The default Pin Code is ”1234”.
When switching to the locked service, you should enter the Pin Code to view the service.
You will not be allowed to watch the skipped service by using the CH-/CH+ button. However, you can watch the skipped service
using the NUMERICAL button or Service List.
•
For detailed information about how to register Favourite Service for the whole services, refer to 5. Service List.
**
Note: This menu may vary according to the type of the receiver.
GB 24
Download from Www.Somanuals.com. All Manuals Search And Download.
**
There are 5 types of service lists – All, Favourite, Bouquet, Satellite, Alphabet - to find services you are interested in quickly and easily.
All service list displays all searched TV or Radio services sorted by service number. Favourite service list displays favourite services
with automatic sub-groups and 4 sub-groups that you can organise services by your private taste. Bouquet service list displays
services with several bouquet subgroups. Satellite service list displays services classified by satellites. Alphabet service list displays all
searched TV or Radio services sorted by service name.
**
5.1 Switching Services
1. Press the OK button while watching a programme to display the service list.
You can also display the service list using the MENU-SELECT
SERVICE-SIMPLE (or ADVANCED).
2. Press the COLOUR button to display the corresponding service list.
RED (All service list), GREEN (Favourite service list), YELLOW (Bouquet
service list), BLUE (Satellite service list), WHITE (Alphabet service list)
3. Select your desired service using the
, CH-/CH+ or NUMERICAL
button, and press the OK button to change to the selected service.
Note: Whenever you press the TV/RADIO button while the service list
is displayed, the service list will be switched between TV and
Radio service list.
GB 25
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5.2 Organising Services
You can edit TV or Radio services using the Organise TV Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE TV
SERVICES-ORGANISE ALL SERVICES) or Organise Radio Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE
RADIO SERVICES-ORGANISE ALL SERVICES). Before leaving Organise TV/Radio Services screen, you will be prompted to save
the changes. If you would like to save the changes, select OK, and press the OK button.
You can lock, unlock, move, skip, and delete services. You can rename a
service.
You can select a service using the
button, and press the COLOUR
button to execute the corresponding operation as described on the screen.
When you rename a service, the keyboard will appear on the screen. You can
change the name using the keyboard. Select a character using the
button, and press the OK button to enter the selected character. After entering
the new name, press the YELLOW button to save it.
•
•
To delete a character, press the BLUE button.
To switch to the standard keyboard, press the RED button.
To switch to the extended keyboard, press the GREEN button.
•
**
Note: You should enter your Pin Code using the NUMERICAL button
to watch the locked services.
GB 26
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5.3 Organising Favourite Services
You can add services to Favourite groups using Organise Favourite TV Services (MENU-INSTALLATION-SERVICE
ORGANISING-ORGANISE TV SERVICES-ORGANISE FAVOURITE A~D) or Organise Favourite Radio Services
(MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE RADIO SERVICES-ORGANISE FAVOURITE A~D). Before leaving Edit
Favourite Services screen, you will be prompted to save the changes. If you would like to save the changes, select OK, and press the
OK button.
The Organise Favourite TV/Radio Services screen consists of Favourite Group
and Favourite List on the left side of the screen and Service List on the right
side. You can move the highlighter in order of Favourite Group, Favourite List,
and Service List using the button. You can move the highlighter in reverse
direction using the button.
To add services to Favourite List, select a service in Service List using the
button, and press the OK button.
For more information about how to edit the services in Favourite List, refer to
5.2 Organising Services.
GB 27
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5.4 Organising Satellites
You can turn a satellite on or off and delete a transponder.
To enter Organise Satellites menu, go to MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE SATELLITES.
The Organise Satellites screen consists of Satellite List on the left side of the
screen and Transponder List and Service List on the right side. You can move
the highlighter in order of Satellite List, Transponder List, and Service List using
the button. You can move the highlighter in reverse direction using the
button.
You can select a satellite in Satellite List or transponder in Transponder List
using the
button, and press the RED button to delete the selected satellite
or transponder.
You can select a satellite in Satellite List using the
button, and press the
YELLOW button to turn the selected satellite off or press the GREEN button to
turn the selected satellite on.
**
Note: You should turn one satellite on at least.
GB 28
Download from Www.Somanuals.com. All Manuals Search And Download.
**
The programme guide provides the programme information for all services,
based on date and time. In addition, it provides convenient ways- viewing
programmes in Now, Next, Weekly, or Quick mode - to search your desired
programme and to watch or reserve it.
You can go to the programme guide screen by just pressing the GUIDE button
or by using MENU-TV GUIDE. To close the guide screen, press the GUIDE or
EXIT button.
**
You can navigate the guide using the following instructions:
•
•
•
•
Press the RED button to display the current or next programme list.
Press the GREEN button to display the programme list for one-week.
Press the YELLOW button to display the reserved programme list.
Press the BLUE button to display the simple Guide. This is also called
Quick Guide.
**
•
•
•
Press the WHITE button to reserve the selected programme in Now, Next,
Weekly, or Quick mode.
Press the WHITE button to change the reservation mode or to cancel the
reservation in Reserved mode.
Select a service using the
or CH-/CH+ button. When switching
services using the button, press the OK button to display the selected
service on the right side of the screen.
Select a day in Weekly mode using the
button.
•
button, and press the OK
GB 29
Download from Www.Somanuals.com. All Manuals Search And Download.
**
Note:
•
•
Press the TV/RADIO button to switch to the Radio Guide.
The reservation icons on the reserved programmes in the guide differ according to the reservation type.
Once
Reserve a programme once.
Daily
Reserve a programme everyday.
Reserve a programme once a week.
Weekly
•
If your desired programme is overlapped with other programme, adjust the reservation appropriately. If the service is locked,
restricted by watching time, you will be prompted to enter your PIN Code to complete the reservation.
GB 30
Download from Www.Somanuals.com. All Manuals Search And Download.
**
This chapter describes the menu which lets you customise your product by your taste. If you are not familiar with navigating menu, see
3.2 Searching Services before setting preferences.
7.1 Parental Control
The Parental Control menu (MENU-PARENTAL CONTROL) lets you control
the access to programmes by programme rating.
Set Censorship Classification by age level. “No Block” allows you to watch
programmes without any blocking. You can block all programmes regardless of
age level. The blocked programmes are required to enter your Pin Code.
We recommend you to change the old Pin Code to a new one periodically for
security. If you have forgotten your Pin Code, please contact your local product
distributor.
7.2 System Setting
The System Setting menu (MENU-INSTALLATION-SYSTEM SETTING) lets you set language, time, audio/video output, UHF tuning,
transparency of OSD, duration time of i-plate and switching mode to reserved service.
1. Language Setting
You can set a default language for menu, audio, and subtitle. And you can set whether or not to display the subtitle.
2. Time Setting
You can set current time, and turn on or off the product automatically. Once you set the Wakeup time and Sleep time, the product is
turned on and off everyday.
GB 31
Download from Www.Somanuals.com. All Manuals Search And Download.
**
3. A/V Output Setting
This menu lets you adjust the audio and video output, match the screen ratio to your TV, and select the display format according to the
screen ratio, and select the TV standard.
4. UHF Tuning
You can select UHF Channels for your TV and adjust fine tuning setting. The channel range and frequency change according to PAL
Standard.
5. Other Setting
You can adjust the transparency level of On-Screen Display (OSD), set the
duration time of the i-plate displayed when switching services and select
automatic or manual mode to change to the reserved service.
GB 32
Download from Www.Somanuals.com. All Manuals Search And Download.
**
The Status menu (MENU-INSTALLATION-STATUS) provides checking tools like status information of system and signal level of
service. If you are not familiar with navigating menu, see 3.2 Searching Services.
**
1. STB Status
You can view the information about the product serial number, Smartcard version, CA Module version, Loader version, and S/W
version. When you contact your service provider or local product distributor, this information may be required.
2. Loader Status
You can view the product serial number, loader version, H/W version, and so on.
3. Signal Detection
You can view the signal strength and signal quality of the service that is currently being viewed.
4. STB Upgrade
For detailed information about STB Upgrade, refer to 10.Software Update.
5. Conditional Access
You can check the information of Conditional Access component – CA Module and Smartcard.
6. Mail Messages
You receive mails sent by broadcasting company. When a new mail arrives, the envelope icon
will appear on the screen.
Sometimes an urgent message will be directly displayed on the screen while you are watching a programme. The old mails will be
deleted automatically when your mail box overflows.
Select a mail using the
button, then press the OK button to read the mail. The message will be displayed. Press the OK or EXIT
button to return to the mail box screen. If you would like to delete the read mail, select Delete, and press the OK button.
GB 33
Download from Www.Somanuals.com. All Manuals Search And Download.
**
The product provides various utilities- viewing calendar, checking your biorhythm, and enjoying games. To use utilities, go to
MENU-UTILITY. If you are not familiar with navigating menu, see 3.2 Searching Services.
**
1. Calendar
You can see the specified monthly calendar. Press the
button to change
year. Press the button to change month. Press the OK or EXIT button to
return to the previous menu.
2. Biorhythm
You can adjust your birth year and date to see your current biorhythm status.
Press the
button to move to the next step. Press the
button to change
a value in the step. Press the EXIT button to return to the previous menu.
3. Games
You can select games using the
button. Use the
, OK,
COLOUR, or EXIT button according to the instructions displayed on the screen.
GB 34
Download from Www.Somanuals.com. All Manuals Search And Download.
**
In order to maintain proper performance of the product, it is essential to have the most up-to-date software. The latest news and
It is recommended that you periodically check for the availability of software upgrades.
**
1. OTA (Over the Air)
OTA, an abbreviation of "over-the-air", means that the software can be downloaded where the manufacturer reserves the right to
decide when and where to release through antenna system.
Over the Air (OTA) is simply an alternative method for downloading software versions. However, the manufacturer reserves the right to
decide when and where this software update can take place latest software versions over the antenna.
The software update will only occur under the following circumstances:
**
1. The equipment should have appropriate loader software.
Caution:
Please note that if you don't have normal loader software, the equipment may not be updated or work after
software update.
2. The manufacturer decides to release software downloading via a designated antenna system.
3. The equipment must be tuned properly to the same channel that the manufacturer uses.
4. Upgrade software when the quality of receiving signal strength is high. If the weather is not so good that the quality of receiving
signal strength is not recommendable, perform the software upgrade later.
**
Caution:
•
Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software
update, it may cause fatal damage to the product.
•
Please be careful not to pull out the Signal line during software update. Update may be interrupted and the product may not work.
GB 35
Download from Www.Somanuals.com. All Manuals Search And Download.
**
The product cannot work at all during software update. It may take 5-10 minutes to update software.
Updating software is largely divided into two ways, automatic detection and using software update menu
(MENU-INSTALLATION-STATUS-STB UPGRADE).
New software can be found when powering on the product. The notice informing you of new software detection will appear on the
screen. If you would like to update software, select Yes, and press the OK button. After completing the software upgrade, the product is
automatically powered off and on again.
The software update menu allows you to update software automatically. After completing the software upgrade, the product is
automatically powered off and on again.
2. Software Update from PC
You can connect your product to the PC directly and upgrade your software by transferring the new software from the PC.
Follow these steps to download new software from PC to this product.
**
1. Download new software file equivalent for this product model from our website into your computer (http://www.humaxdigital.com).
2. Download and install download tool from our website into your computer.
3. Connect your PC to this product with RS-232C serial cable.
4. Execute installed download tool, and then follow the instructions on the download tool.
5. Press the STANDBY button to make this product operating.
**
GB 36
Download from Www.Somanuals.com. All Manuals Search And Download.
**
Before contacting your local service, please read the following instructions. If the product does not work normally after completing the
following troubleshooting, please contact your local product distributor or service centre.
**
1. The LED on the front panel does not light.
- Check the main power cable and check that it is plugged into a suitable power outlet.
**
2. No picture
- Make sure that the product is in operation mode.
- Make sure that the AV Cable is firmly connected to the TV.
- Make sure that the antenna line is correctly connected to the equipment.
- Check the brightness level of TV.
- Check the service is on air.
**
3. Poor picture & sound quality
- Make sure there is no mobile phone or microwave oven near the equipment.
- Make sure the signal strength and quality which can be influenced by weather.
- Change satellite dish into bigger one if it is small.
- Replace the LNB with the one with low noise factor if the noise factor is high.
- Replace the LNB with new one if it is damaged or out of order.
**
4. No or poor sound
- Check the volume level of the TV and product.
- Check the mute status of the TV and product.
- Press the SOUNDTRACK button to change the audio type.
GB 37
Download from Www.Somanuals.com. All Manuals Search And Download.
**
5. Remote controller does not operate
- To manipulate the equipment with the remote controller, its emitting part should directly point towards its receiving part of the
product.
- Check the battery of the remote controller.
**
6. Reservation is unavailable
- Check whether it is not overlapped with other reservation.
- Check whether the power is off.
**
7. Watching scrambled service is not available
- Check the correct Smartcard is plugged in.
- Check the Smartcard is correctly plugged in, and plug the Smartcard again.
- Check whether the Smartcard is damaged.
- Make sure you subscribe to the service.
GB 38
Download from Www.Somanuals.com. All Manuals Search And Download.
**
MPEG Transport Stream A/V Decoding
Power Supply
Aspect Ratio
4:3, 16:9
Input Voltage
Type
AC 90 ~ 250V, 50/60Hz
Video Resolution
Audio Mode
720 x 576, 720 x 480
Switching Mode Power Supply
(SMPS)
Single /Dual mono/ Stereo /Joint
stereo
Power Consumption
Protection
Operation mode: Max. 30 W
Standby mode: Max. 9 W
Memory
Separate internal fuse & Lightning
protection
Flash Memory
2 Mbytes
8 Mbytes
Graphics(MPEG) &
System Memory
Physical Specification
Size
310 mm X 60 mm X 237 mm
1.89 kg
EEPROM
8 Kbytes
Weight (Net)
RF-Modulator
Operating
0
to +45
Output Channel
TV standard
CH 21 ~ 69
PAL I/G/B/D/K
CH 36
Temperature
Storage Humidity
5% ~ 95% RH (Non-condensing)
Preset Channel
A/V & Data In/Out
Video
1 Output RCA (CVBS)
2 Output RCA (Audio L/R)
9-pin socket type
Audio
RS-232C
GB 39
Download from Www.Somanuals.com. All Manuals Search And Download.
**
You can get information such as troubleshooting guide, software upgrades and product support guide from the following web sites and
call centre (Hotline).
Please try to contact to your local dealers first when you have any problem.
**
Homepage
English
Deutsch
Arabic
**
HCSA (Humax Customer Service Area)
Software Download, Information and Technical Q&A
English
Deutsch
**
E-mail (Technical Q&A)
Europe & North Africa
Germany
Middle East
Asia & Other area
GB 40
Download from Www.Somanuals.com. All Manuals Search And Download.
**
Humax Middle East Call Centre (Dubai, UAE)
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)
E-mail: [email protected]
Open: Local Time in Dubai (GMT+4)
9:00 - 20:00 (Saturday - Thursday, close on Friday)
Support Language: English/Arabic
**
Humax Hotline (Germany)
Germany: 01805 778 870 ( 0,12/Min)
Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge)
Open: Local Time in Germany (GMT+1)
8:00 - 20:00 (Monday - Friday)
8:00 - 18:00 (Saturday)
Support Language: Deutsch/English
**
Humax BTCI Hotline (Premiere Model)
Germany: 01805-778900 ( 0,12/Min)
Austria: 0900-900633 ( 0,33/Min)
For hardware repair, please refer to support website. (Homepage or HCSA)
GB 41
Download from Www.Somanuals.com. All Manuals Search And Download.
|