Display System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Model
89226
REQUIRED TOOLS AND MATERIALS:
WARNING!
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
• 2 People
• (2 each) Wrenches and/or
Socket Wrenches and
Sockets.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
7/16"
1/2"
9/16"
• 2 Stepladders
• Phillips Screwdriver
AND/OR
7/16"
1/2"
9/16"
IMPORTANT!
To ensure prompt and correct handling of any problems, or to answer any questions, please contact the Sample and
Display Technician at 1-800-558-5234.
P/N 21155402
09/04
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST (See Hardware Identifier)
Item Qty. Part No.
Description
Item Qty. Part No.
Description
1
2
3
4
5
6
7
8
3
1
2
2
48
3
12
1
12
1
12
2
6
200318
200503
200520
200533
201219
201344
201611
202795
203063
203157
203100
203231
203294
203309
203470
203472
203795
203796
Bracket, Reinforcement S/J
P/S Cover
Screw, #8 x 3/4", Flat Hd, Phillips
Spacer, Mounting
Net Clips
Plastic Knob
Bolt,Hex-Flange, 5/16-18 x 3"
NBA Sticker
Locknut, 3/8-16 Nylon Insert
Bolt, Carriage, 5/16-18 x 2.25"
19
20
21
22
23
24
25
26
27
28
7
4
1
3
2
1
4
1
7
1
1
1
3
1
3
1
203798
204290
206219
207103
900033
900060
Bolt, Hex 5/16-18 x 1.5"
Net
Pole Cap, 3"
Pole Cap, 3.5"
Bracket, S/J
Pole, 3"
Rim
900253
206987
909256
909259
909602
912006
939235
990062
204516
Bracket, Pole Mount, No Tools
Wedge
Board, 48", Fan, Viper
Board, 44", Fan, Evolution, NT
Board, 44", Fan, Zone Attack
Extension Arm
Board, 48", SFA, Titanium II
Pole, 3.5"
Pole Sleeve
9
10
11
12
13
14
15
16
17
18
Nut, Hex-Flange 5/16-18 Whiz Lock 29
Bolt, Carriage, 5/16-18 x 3.5"
Bolt, U, Round, 3/8-16 x 3.5"
Washer
Washer, Flat, S/J
Spring
30
31
32
33
34
4
2
2
2
Nut, 3/8-16 Special S/J
T-bolt, 3/8-16 x 5"
2
HARDWARE IDENTIFIER (BOLTS & SCREWS)
Item #7 (1)
Item #10 (1)
Item #3 (2)
Item #18 (2)
Item #19 (7)
Item #12 (2)
HARDWARE IDENTIFIER (NUTS, WASHERS & SPRINGS)
Item #9 (12)
Item #14 (4)
Item #17 (2)
Item #15 (2)
Item #11 (12)
Item #16 (2)
P/N 21155402
09/04
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install display boards in the marked locations. Each mounting location consists of a mounting pole stub with
the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is
facing).
Display Stand - Top View
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Display boards will be mounted as follows:
Corner Location 1: 9H235A
• 48” SFA Board
• Titanium II Logo
• Black Slam Jam Goal with Cover
• Use extension arm for assembly
Corner Location 2: 73256
• 48” Fan Recycled Board
• Viper Logo
• Black Slam Jam Goal
• Use extension arm for assembly
Corner Location 3: 61259
• 44” Fan Recycled Board
• Evolution Logo
• Black Standard Goal
• No Tools, E3 Elevator System
Corner Location 4: 80602
• 44” Fan Recycled Board
• Zone Attack Logo
• Black Standard Goal
• Use extension arm for assembly
P/N 21155402
09/04
4
Download from Www.Somanuals.com. All Manuals Search And Download.
At corner location 3
slide the pole sleeve
(34) inside the
1b.
1a.
Slide the 3" diameter end of
the display pole (24) inside
the pole sleeve.
mounting stub.
24
Secure the display pole by
sliding the display wedge
(27) into position as shown.
To lock the display pole in
place, tighten the hex-bolt
(19).
34
24
27
19
At corner location 1, 2 and 4 slide the
3-1/2" diameter end of the display pole
(33) inside the mounting stubs.
Secure the display pole by sliding the display wedge (27)
into position as shown. To lock the display pole in place,
tighten the hex-bolt (19).
2b.
2a.
33
19
27
27
19
P/N 21155402
09/04
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 1: STEEL FRAME ACRYLIC BACKBOARD ASSEMBLY
11
31
Display Stand - Top View
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
32
4
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
18
1.
Insert “T” bolt (18) through Slam Jam bracket (23) as shown.
Secure Slam Jam bracket (23), extension arm (31) and
mounting spacers (4) assemblies to backboard using bolt (7 )
and nut (11) as shown.
23
7
Attach board assembly to pole.
2.
32
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW
THIS WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY DAMAGE.
22
13
9
P/N 21155402
09/04
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
Tighten nut (17) until
flush with end of "T" bolt
(18) as shown here.
3.
• Fit rim (25) securely into bracket (23) as shown.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
25
17
18
NOTE:
15
Peel protective film
from surface of
acrylic backboard
prior
16
1
23
to use.
Attach cover (2) to rim using
screws (3).
4.
Apply logo label (8) to rim cover (2).
5.
3
25
2
2
8
P/N 21155402
09/04
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 2: 48” FAN MOLDED PLASTIC BOARD ASSEMBLY
11
Display Stand - Top View
3-1/2"
3"
31
Corner “4”
80602
Corner “3”
61259
28
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Insert “T” bolt (18) through Slam Jam bracket
(23) as shown.
1.
18
Secure Slam Jam bracket (23) and extension
arm (31) to backboard using bolt (7) and nut
(11) as shown.
18
Tighten completely.
23
7
Attach board assembly to pole.
2.
28
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW
THIS WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
22
PROPERTY DAMAGE.
13
9
P/N 21155402
09/04
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
• Fit rim (25) securely into bracket (23) as shown.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
25
17
18
NOTE:
Tighten nut (17) until
15
flush with end of "T" bolt
(18) as shown here.
16
23
1
P/N 21155402
09/04
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 3: 44" FAN MOLDED PLASTIC BOARD ASSEMBLY
Pole bracket will need to be lightly pressed into
backboard ribbing. Be sure to press completely into
place. Attach rim (25) to backboard and pole bracket
1.
Display Stand - Top View
(26) with knob (6), reinforcement bracket (1), and
carriage bolt (10) as shown. Tighten knob
completely.
3-1/2"
3"
Corner “4”
80602
Corner “3”
61259
WARNING!
KNOB MUST BE TIGHTENED
COMPLETELY AND CHECKED
FOR TIGHTNESS BEFORE
EACH USE.
29
6
Corner “2”
73256
Corner “1”
9H235A
1
3-1/2"
3-1/2"
25
NOTE:
10
BOARD STYLE
MAY VARY
26
PRESS BRACKET (26)
INTO PLACE HERE
2.
Attach board assembly to pole with carriage
bolts (12) and knobs (6) as shown. Install pole
cap (21) as shown.
21
6
12
24
P/N 21155402
09/04
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Corner Location 4: 44" FAN MOLDED PLASTIC BOARD ASSEMBLY
11
Display Stand - Top View
3-1/2"
3"
31
Corner “4”
80602
Corner “3”
61259
30
Corner “2”
73256
Corner “1”
9H235A
3-1/2"
3-1/2"
Attach rim (25) to backboard (30) and
extension arm (31) with bolts (7), washers (14)
and nuts (11).
1.
14
25
Tighten completely.
7
Attach board assembly to pole.
2.
30
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW
THIS WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
22
PROPERTY DAMAGE.
13
9
P/N 21155402
09/04
11
Download from Www.Somanuals.com. All Manuals Search And Download.
11.
Install net clips.
CLIP “ARM”
WARNING!
USE OF THIS PRODUCT
WITHOUT PROPER
INSTALLATION OF SMART
CLIPS®, OR WHEN ALL SMART
CLIPS® ARE NOT PRESENT
COULD RESULT IN BODILY
HARM. BE SURE TO FOLLOW
DIRECTIONS CAREFULLY.
CLIP “BODY”
25
Insert one “arm” of clip into ram as shown. Twist “body” of clip
slightly so that second “arm” slides over the top of the first “arm” as
shown.
Push in direction indicated by arrows.
A
5
Push second “arm” back and into ram as shown.
B
Twist “body” of clip slightly again to spread “arms” of clip.
Clip “arms” must be flat and touching edge to edge as shown, not
overlapping.
C
P/N 21155402
09/04
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Install net.
12.
25
SIDE VIEW
20
5
NETCLIP
NET
Insert net into bottom of clip as shown.
SIDE VIEW
Twist net until it snaps into position.
Net must be centered through clip.
NETCLIP
NET
P/N 21155402
09/04
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|