Owner’s Manual
Havis Rugged Mobile Docking Station
For Dell XFR & ATG Computers
DS-DELL-100 Series / DS-DELL-220 Series
DS-DELL-101
DS-DELL-101-3
DS-DELL-103
DS-DELL-221
DS-DELL-223
1-800-524-9900
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original Instructions)
Before Beginning
Havis is pleased to provide this Owner’s Manual to aid in the proper installation
and use of the DS-DELL-100 Series/220 Series Docking Station for the
Dell XFR & ATG laptop computers.
For questions regarding the set-up of your DS-DELL-100 Series/220 Series Docking
product support and information.
This Owner’s Manual applies to the following Part Numbers:
DS-DELL-101
DS-DELL-221
DS-DELL-101-3 DS-DELL-223
DS-DELL-103
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. (SEE BELOW)
Dell E6420 XFR shown with Connector Access Door in closed position (left) and open position (right)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Specifications
4
5
Parts Included
Port Replication Capability
Installation
5
6
Cable Management
Operation - Docking
Operation - Undocking
7
9
10
Specifications
Power Supply Input
Dimensions
Weight
20V DC-In
13.6” ( 34.4 cm) W x 12.7” ( 32.3 cm ) D x 3.7” ( 9.4 cm ) H
6.6 lbs ( 2.9 kg )
DS-DELL-100 Series Docking Stations for DELL E6400, E6410, E6420 XFR Computers
Operating Environment
Storage Environment
0° C to 40° C ( 32° F to 104°F )
-60° C to 75° C ( -76° F to 167° F )
DS-DELL-220 Series Docking Stations for DELL E6400, E6410, E6420 ATG Computers
Operating Environment
Storage Environment
0° C to 35° C ( 32° F to 95°F )
-60° C to 75° C ( -76° F to 167° F )
DECLARATION OF CONFORMITY FOR CE MARKING
Havis, Inc. declares that their DS-DELL-100 & DS-DELL-220 SERIES DOCKING STATIONS:
Are classified within the following EU Directives:
EU Electromagnetic Compatibility Directive 2004/108/EC, 2009/19/EC
And further conform with the following EU Harmonized Standards:
EN 55022 (2006) + A1 2007, EN 55024: 1998 + A1: 2001 + A2: 2003
EN 50498: 2010
Clause 7.1 Broadband Radiated Disturbances - Quasi-Peak
Clause 7.2 Narrowband Radiated Disturbances - Average
Clause 7.3 Conducted Radiated Disturbances - Severity Level 2
Dated: September 28 , 2011
Position of signatory: Chief Information Officer / Chief Financial Officer
Name of signatory: Steve Ferraro
Signed:
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Included
Docking Station
Macro Alignment Brackets
(DS-DELL-220 Series only)
Strain Relief Points
Foot Pads
Docking Connector
(DS-DELL-220 Series only)
Front Hooks
Lock
Power Button/LED
Latch Handle
Mounting Bracket
Hardware Kit
This Hardware Kit includes:
1. Zip Ties (4)
2. Keys (2)
3. 1/4”-20 Screws (4)
4. M5 Screws (4)
Tools required for installation:
• 3mm Hex Drive
• 5/32” Hex Drive
(For attaching Mounting Bracket to
Docking Station with M5 Screws)
(For attaching Mounting Bracket to
Motion Device with 1/4”-20 Screws)
Port Replication Capability
Rearward Connectivity *(Antennas for DS-DELL-101-3 only)
Side Connectivity
Microphone
Mouse
Antennas*
Keyboard
Parallel (DB-25) (Wi-Fi, GPS, Cellular)
eSATA
VGA
Display (x2)
Headphone
USB 2.0 (x3)
(HDMI Dongle Required)
Ethernet
USB 2.0 (x2)
Serial
Power Input
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1) Install the Mounting Bracket to the Motion Device using (4) 1/4“-20 screws
(Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) 10%.
NOTE: Numerous hole patterns present in Mounting Bracket will accommodate Havis
Motion Devices as well as most competitors’.
1/4”-20 Screws
Mounting Bracket
Typical Motion Device Example
(not included)
2) Lower the Docking Station to the Mounting Bracket as shown and secure with
(4) M5 screws (Hardware Kit Item 4). Torque screws to 25 in-lbs (2.8 Nm) 10%.
M5 Screws
NOTE: We recommend applying a drop of medium strength (blue)
thread locking adhesive to the threads of all fasteners.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Management
1) Tip the Docking Station forward to a position that is comfortable to work with.
2) Install all cables that are necessary for computing needs.
3) Use Zip Ties (Hardware Kit Item 1) to strain relieve cables to the Strain
Relief Points at rear of Docking Station.
4) Gather all cables to one side and tie off to unused holes on underside
of Docking Station.
Insert as many zip ties as
necessary to secure cables.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Management (continued)
5) Create a service loop with cables to ensure that no tension is on the
connectors and to enable intended motion.
6) Tie off cables onto a stationary part of the mounting system.
(Mounting system not included with Docking Station)
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
Collect cables to secure
to the mounting system
(Note: mounting system not included)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation - Docking
• DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
• DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE,
CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
1) To load the computer, first ensure Docking Station is unlatched by pushing
the Lock to release the Latch Handle. Once Docking Station unlatches, release
pressure on Lock to allow the Latch Handle to extend fully.
Note: Red warning label on Latch Handle is visible when fully extended.
Lock
Latch Handle
2) With rear of computer elevated, load front of computer into Docking Station
by aligning Front Hooks with the appropriate recesses in the computer case.
Front
Rear
3) Lower rear of computer onto Docking Connector. Blue Port Replication LED
will illuminate once computer is properly seated.
4) With computer seated on Docking Station, push in the Latch Handle to
secure computer to Docking Station.
Front
Rear
Port Replication LED
Latch Handle
• LED INDICATORS DO NOT INDICATE PHYSICAL SECURITY
• DOCKING STATION MUST BE LATCHED AT ALL TIMES
WHILE VEHICLE IS IN MOTION
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation - Docking (continued)
5) For theft deterrence, secure computer by locking Docking Station with
supplied key (Hardware Kit Item 2).
Lock
6) Power on computer. The Laptop Power Button LED will illuminate blue to
indicate proper system function. Once docked, the Laptop Power Button may
be used to power computer on/off.
Laptop Power
Button / LED
Operation - Undocking
1) If previously locked, unlock Docking Station using supplied key.
Lock
2) To release Latch Handle, press in the Lock, and the Latch Handle will spring
open to the Unlatched position.
Note: Red warning label on Latch Handle is visible when fully extended.
Lock
Latch Handle
3) Once unlatched, grab both sides of computer and carefully lift out of
Docking Station, rear end first.
Front
Rear
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Related Products
Havis offers a wide variety of accessory products specifically for
use with the DS-DELL-100 & DS-DELL-220 Series Docking Station.
LPS-105
90W Power Supply
External power supply and cable for Dell Laptops with
cigarette lighter adaptor.
DS-DA-408
Screen Stiffener
Secure your laptop screen to prevent excess wear and
reduce vibration while in use.
DS-DA-102
USB Powered Light
Soft red LED light illuminates the laptop keyboard
for night viewing.
DS-DA-208
Card Reader Mounting Bracket
Mount an E-Seek Model 250 card reader to the side
of the Docking Station.
(Bracket can be customized for other Card Reader Models)
Product
Catalog
Interactive Online Catalog
Our interactive catalog is an easy-to-use, full color,
online version of our printed catalog.
Mounting Solutions
Computing Solutions
Power Management
Solutions
Transport Solutions
Lighting Solutions
to the Interactive Catalog.
1-800-524-9900
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Havis, Inc.
75 Jacksonville Road, PO Box 2099
Warminster, PA 18974
47801 Anchor Court
Plymouth, MI 48170
DS-DELL-100-220_OMN_9-11
Download from Www.Somanuals.com. All Manuals Search And Download.
|