electric Meat grinder
99598
HeaVY-dUtY electric Meat
grinder
99599
cleaning, asseMblY, and OperatiOn instrUctiOns
MOdel 99598
MOdel 99599
read this material before using this product.
Failure to do so can result in serious injury.
saVe tHis ManUal.
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09j
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
electrical safety
1.
To protect against electri-
cal shock do not immerse
cord, plugs, or the main
unit in water or other
caUtiOn, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
liquid. Only the removable
non-electrical parts of the unit may be
immersed for cleaning. Thoroughly
clean and dry these parts prior to first
use and before every subsequent
use.
nOtice is used to
address practices
not related to personal injury.
2. This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock,
this plug is intended to fit into a polar-
ized outlet only one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact
a qualified electrician. Do not change
the plug in any way.
caUtiOn, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
read and Understand all
instrUctiOns
3. Do not use this product in a damp or
wet location.
When using electrical appliances,
safety precautions should always
be followed including the follow-
ing:
4. Do not clean with metal scouring
pads. Metal pieces can break off the
pads and touch electrical parts involv-
ing risk of shock.
Work area safety
power cord safety
1. Do not use outdoors.
1.
A short power supply cord is to be
provided to reduce risks resulting
from becoming entangled in or trip-
ping over a longer cord.
2. Do not place on or near a hot gas or
electric burner, or in a heated oven.
3. Extreme caution must be used when
moving appliance.
2.
Do not use with any type of extension
cord.
4. Keep the work area well lit. Make
sure there is adequate surrounding
workspace. Keep the work area free
of obstructions and other debris.
Hot surface safety
1. Do not operate the appliance near
draperies, curtains, and walls. These
flammable materials may catch fire
from this electric appliance.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Provide adequate ventilation space
on all sides of the appliance, espe-
cially near vents. Inadequate ventila-
tion may cause fire or damage to the
appliance.
connect, turn any control to “off”, then
remove plug from wall outlet.
2. Always ensure Switch is off and all
parts are dry before plugging in.
3. Do not continuously operate for lon-
ger than 20 minutes.
3. Keep multiple ABC class fire extin-
guishers nearby. Monitor the appli-
ance while in use.
4. Do not use to grind hard foods such
as bones and nuts.
Foodborne illness safety
5. Do not use to grind ginger and other
1. Before every use, thoroughly clean
the appliance (see “Cleaning” section
for instructions) EXCEPT for those-
parts that do not touch foods. Then
wash your hands.
materials with hard fiber.
6. Do not adjust Cutting Blade and Cut-
ting Plate while using Kubbe (a meat-
stuffed dumpling) Attachments.
7. Do not apply excessive pressure or
force during operating. This may
result in jamming.
2. Follow Food and Drug Administration
(FDA) food safety recommendations
for cooking and food handling (www.
fda.gov). Also, refer to the following
safety information, taken from FDA’s
website:
8. If unit jams, turn off Meat Grinder
immediately, unplug cord from outlet
and clean the unit.
a. Cooking times (if provided) are
estimated. Verify that all food is
properly cooked. Steam, roast, or
otherwise heat all pieces of meat
and eggs to an internal temperature
9. Do not disassemble individual parts
or repair unit without help of trained
service technician. If supply cord is
damaged, it must be replaced by
trained service technician to avoid
injury or damage.
1
of at least 160° F .
b. Keep hot food hot (above 140° F)
and cold food cold (below 40° F).
Do not let perishable food sit out
longer than 2 hours (1 hour in tem-
peratures above 90° F).
10. Do not use appliance for other than
intended use.
11. Maintain labels and nameplates on
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
general safety
1. Attach plug to appliance first, then
plug cord into the wall outlet. To dis-
12. Do not store anything other than the
manufacturer’s recommended acces-
sories in this unit when not in use.
1 Poultry should be cooked to an internal
temperature of at least 165° F. For whole
poultry, temperature measurement should
be taken in the thigh. To gauge shellfish
doneness, refer to FDA food safety guide-
lines.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
13. This product is not a toy. Keep it out
of reach of children when children are
not being closely supervised.
speciFicatiOns
(FOr MOdel 99598)
Electrical
Requirements
120 V~ / 60 Hz / 250 W
14. WARNING: Handling the cord on
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (Califor-
nia Health & Safety Code § 25249.5,
et seq.)
2 lb. per minute / 1-1/2”
cube meat pieces
Max. Capacity
Speed Setting
Power Cord
Single Speed
3’ - 10” L
1 Feed Stick
1 Stainless Steel
Cutting Blade
3 Cutting Plates
1 4-Piece Sausage
Stuffing Kit
Accessories
15. When carrying Meat Grinder, hold
Motor Housing with both hands. Do
not carry by holding Hopper Plate.
1 2-Piece Kubbe
Attachment
16. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
HOUseHOld Use OnlY
speciFicatiOns
(FOr MOdel 99599)
Electrical
Requirements
120 V~ / 60 Hz / 350 W
2 lb. per minute / 1-1/2”
cube meat pieces
Max. Capacity
saVe tHese
instrUctiOns.
Speed Setting
Power Cord
Single Speed
3’ - 10” L
1 Feed Stick
1 Stainless Steel
Cutting Blade
3 Cutting Plates
1 4-Piece Sausage
Stuffing Kit
Accessories
1 2-Piece Kubbe
Attachment
HOUseHOld Use OnlY
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
ed) to Cutting Plates to keep them
lubricated.
Unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
5. Warning! Do not use bleach, thin-
ners or benzines during clean. These
will damage or discolor Meat Grinder.
asseMblY
(FOr 99598 Meat grinder)
cleaning
read the entire iMpOrtant
saFegUards section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
read the entire iMpOrtant
saFegUards section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
tO preVent
seriOUs injUrY
FrOM accidental
OperatiOn Or electric
sHOck:
before appliance assembly or
adjustment, make sure the
appliance’s switch is turned
off, the cord is unplugged,
and the unit has cooled
completely.
tO preVent
seriOUs injUrY
FrOM accidental
OperatiOn Or electric
sHOck:
before cleaning appliance,
make sure the appliance’s
switch is turned off, the cord
is unplugged, and the unit has
cooled completely.
do not immerse motor/heating
element, cord, or plug in water
or any other liquid.
note: For additional information regarding
the parts listed in the following pages,
refer to the 99598 Assembly Diagram
on pages 10 and 11 of this manual.
1. To prevent foodborne illness, wash
the non-electrical parts of the unit be-
fore assembly in warm, soapy water,
taking care to rinse completely.
1. Slide Head (12) into Housing Open-
ing (15). While holding Head, place
Locking Knob (22) into slot on Left
Motor Housing (21).
2. Dry with a soft cloth. Wipe the motor/
heating element housing with a soft
clean cloth or sponge.
2. Turn Locking Knob clockwise until
tight and Head is fastened securely to
housing.
3. Allow unit to dry completely before
assembly or use.
3. Twist Feed Screw (100) long-end
first into Head. Continue twisting until
Feed Screw fastened into housing.
4. After washing and drying, apply a
small amount of salad oil (not includ-
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Slide Cutting Blade (9) onto Feed
Screw, making sure the edges of Cut-
ting Blade face front of housing.
4. To make sausage, insert desired
Sausage Maker (3, 4, or 5) into Sau-
sage Adapter (2).
5. Warning! Cutting Blade has sharp
blades. Wear gloves and use care
when installing Cutting Blade.
5. Place wide end of Sausage Adapter
against the Head and in front of Cut-
ting Blade.
6. Slide selected Cutting Plate (6, 7, or
8) over Cutting Blade, using the slot
along Plate edge as guide.
6. Slide Cap over Sausage Maker and
Adapter and turn clockwise until Sau-
sage Adapter is fastened securely
against housing. caUtiOn! Do not
overtighten.
7. Screw Cap (1) into place on hous-
ing until secure. caUtiOn! Do not
overtighten.
7. For making Kubbe, place Kubbe At-
tachments (10, 11) onto Feed Screw
shaft. Slide down until the Attach-
ment tabs fit into the slots.
8. Slide Hopper Plate (13) onto top of
Head until secure.
9. Set Grinder on flat and stable counter
space that does not block vents along
bottom of housing.
8. Slide Cap over Attachments and turn
clockwise until fastened securely
against housing. caUtiOn! Do not
overtighten.
10. Cut foods into small pieces that can
easily fit into Hopper.
asseMblY
OperatiOn
(FOr 99599 Meat grinder)
(FOr 99598 Meat grinder)
read the entire iMpOrtant
saFegUards section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
read the entire iMpOrtant
saFegUards section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
tO preVent
seriOUs injUrY
FrOM accidental
OperatiOn Or electric
sHOck:
1. Once food is ready, plug in Power
Cord (17) and press Switch (20) to
activate.
2. Feed food into Hopper Plate. Use
Food Pusher (14) to press food down
Plate and into Head.
before appliance assembly or
adjustment, make sure the
appliance’s switch is turned
off, the cord is unplugged,
and the unit has cooled
completely.
3. WARNING! Do NOT use fingers to
push food into grinder. Only use
Food Pusher.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
note: For additional information regarding
the parts listed in the following pages,
refer to the 99599 Assembly Diagram
on pages 12 and 13 of this manual.
OperatiOn
(FOr 99598 Meat grinder)
read the entire iMpOrtant
saFegUards section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
1. Slide Head (12) into Housing Open-
ing (15). While holding Head, place
Locking Knob (16) into slot on Left
side of Motor Housing (17).
2. Turn Locking Knob clockwise until
tight and Head fastened securing to
housing.
1. Once food is ready, remove the
Power Cord (19) from the Cord Com-
partment (20) and plug Cord into
outlet. The red Power light will turn
on. Press On Key (35) to activate.
3. Twist Feed Screw (100) into Head.
Continue twisting until Feed Screw
Base (101) is fastened securely into
housing.
2. Feed food into Hopper Plate. Use
Food Pusher (14) to press food down
Plate and into Head.
4. Slide Cutting Blade (11) onto Feed
Screw, making sure the edges of Cut-
ting Blade face front of housing.
3. WARNING! Do NOT use fingers to
push food into grinder. Only use
Food Pusher.
5. Warning! Cutting Blade has sharp
blades. Wear gloves and use care
when installing Cutting Blade.
4. Please note: While On Key is
pressed, a beeping will sound and
the green ON light will activate.
6. Slide selected Cutting Plate (6, 7, or
8) over Cutting Blade, using the slot
along Plate edge as guide.
5. To stop the Grinder, press the Off Key
(33).
7. Screw Cap (1) into place on hous-
ing until secure. caUtiOn! Do not
overtighten.
6. In case of a food blockage, press Off
key and then Reverse Key (31). The
green reverse light will activate.
8. Slide Hopper Plate (13) onto top of
Head until secure.
7. please note: To change from reverse
to forward direction, first press Off for
at least three seconds before press-
ing On again. This will help prevent
damage to motor.
9. Set Grinder on flat and stable counter
space that does not block vents along
bottom of housing.
10. Cut foods into small pieces that can
8. caUtiOn! Machine should not be
run for longer than 20 continuous
minutes. The motor will deactivate
automatically after 1 hour of continu-
ous running.
easily fit into Hopper.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
9. If the Grinder gets jammed, the over-
load light will flash and the beep-beep
alarm will sound.
tO preVent seriOUs
injUrY FrOM appliance
FailUre:
do not use damaged
appliances. if abnormal
noise or vibration occurs,
have the problem corrected
before further use.
10. When jammed, the Circuit Breaker
(26) will trigger. Once jam is cleared
(Inspection And Maintenance), reset
Circuit Breaker switch.
11. To make sausage, insert desired
Sausage Maker (3, 4, or 5) into Sau-
sage Adapter (2).
1. beFOre eacH Use, inspect the
general condition of the appliance.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
12. Place wide end of Sausage Adapter
against the Head and in front of Cut-
ting Blade.
13. Slide Cap over Sausage Maker and
Adapter and turn clockwise until Sau-
sage Adapter is fastened securely
against housing. caUtiOn! Do not
overtighten.
2. To clear jams, switch off Grinder and
remove power cord from outlet.
3. Unscrew Cap and remove Cutting
Plate. caUtiOn! Use screwdriver
(not included) to remove Cutting
Plate from Head. Do not remove with
fingers.
14. For making Kubbe, place Kubbe At-
tachments (9, 10) onto Feed Screw
shaft. Slide down until the Attach-
ment tabs fit into the slots.
4. Remove clogged meat, wash parts
in warm, soapy water, dry and reas-
semble.
15. Slide Cap over Attachments and turn
clockwise until fastened securely
against housing. caUtiOn! Do not
overtighten.
please read tHe FOllOWing careFUllY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER
THE MANUFACTURER OR DISTRIBUTOR MAKES ANy
REPRESENTATION OR WARRANTy OF ANy KIND TO
THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE
ANy REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLy STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
By CERTIFIED AND LICENSED TECHNICIANS, AND NOT
By THE BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
inspectiOn and
Maintenance
tO preVent
seriOUs injUrY
FrOM accidental
OperatiOn Or electric
sHOck:
before appliance inspection
or maintenance, make sure
the appliance’s switch is
turned off, the cord is
unplugged, and the unit has
cooled completely.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
99598 parts list
99598 parts list
part
1.
2.
3.
4.
5.
6.
7.
description
Q’ty
1
1
1
1
1
1
1
part
description
Q’ty
1
1
1
1
1
1
1
Cap
100. Feed Screw
101. Wire Loop
Sausage Maker Adapter
Small Sausage Maker
Medium Sausage Maker
Large Sausage Maker
Medium Cutting Plate
Fine Cutting Plate
102. Washer (M14×0.8)
103. POM Washer
104. Washer (M14×0.2)
105. Feed Screw Base
200. Gearbox
8.
9.
Coarse Cutting Plate
Cutting Blade
1
1
201. Fan
202. Motor
1
1
10. Kubbe Attachment A
11. Kubbe Attachment B
12. Head
13. Hopper Plate
14. Food Pusher
15. Housing Opening
16. Rubber Half-Ring
17. Power Cord
18. Self-Tap Bolt (M4×16)
19. Switch Holder
20. Switch
1
1
1
1
1
1
2
1
2
1
1
1
203. Rear Gearbox
204. Washer (M5)
205. Spring Washer (M5)
206. Bolt (M5×12)
207. Washer (M8×0.2)
208. Gear C
209. Rubber Shroud
210. Small shaft
211. Front Gearbox
212. Nut (M8)
1
3
3
3
5
1
6
2
1
1
4
1
213. Self-Tap Bolt (M4×18)
214. Bushing A
215. Gear A
21. Left Motor Housing
22. Locking Knob
1
1
23. Rubber Underlay
24. Right Motor Housing
25. Self-Tap Bolt (M4×20)
4
1
5
216. Washer (M12×0.2)
217. Gear B
218. Bushing B
2
1
1
record product’s serial number Here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
99598 asseMblY diagraM
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
99599 parts list
99599 parts list
part
1.
2.
3.
4.
5.
6.
7.
8.
description
Q’ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
4
1
part
description
Q’ty
4
6
1
1
10
1
1
4
1
1
2
1
1
1
1
1
1
1
3
3
1
2
1
1
1
1
1
1
1
1
1
2
1
Cap
39. Self-Tap Bolt (M4×12)
40. Bolt Seat
Sausage Maker Adapter
Large Sausage Maker
Medium Sausage Maker
Small Sausage Maker
Coarse Cutting Plate
Fine Cutting Plate
41. PCB Box
42. PCB Cover
43. Self-Tap Bolt (M4×20)
44. Cord Compartment
45. Bottom Board
46. Rubber Underlay
100. Feed Screw
101. Feed Screw Base
102. Washer (M16×0.2)
103. POM Washer
104. Washer (M16×1.5)
105. Wire Loop
200. Gearbox
201. Fan
202. Motor
203. quakeproof Washer
204. Insulated Washer
205. Bolt (M5×20)
206. Rear Gearbox
207. Washer (M10×0.5)
208. Shaft
Medium Cutting Plate
Kubbe Attachment A
9.
10. Kubbe Attachment B
11. Cutting Blade
12. Head
13. Hopper Plate
14. Food Pusher
15. Opening
16. Locking Knob
17. Motor Housing
18. Coping
19. Supply Cord
20. Cord Compartment Cover
21. Cord Connected Switch
22. Power Switch
23. Switch Seat
24. Cord Connected Breaker
25. Key Holder
26. Circuit Breaker
27. Breaker Fixer
28. Spring
209. Shaft Base
210. Washer (M8×0.5)
211. Bevel Wheel
212. Sleeve
213. Coupled Gear
214. Spring Ring (M12)
215. Gear Wheel
216. Washer (M12×0.5)
217. Washer (12×0.2)
218. Front Gearbox
219. Washer (M5)
220. Spring Washer (M5)
221. Bolt (M5×15)
222. Bushing (M12)
223. Shaft (M12)
29. Reset Key
30. Reset Transducer
31. Reverse Key
32. Reverse Transducer
33. Off Key
34. Off Transducer
35. On Key
36. On Transducer
37. Self-Tap Bolt (M3×8)
38. PCB
3
3
3
1
1
record product’s serial number Here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
99599 asseMblY diagraM
SKU 99598/99599 For technical questions, please call 1-800-444-3353.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
|