XQB70-10
Full Automatic Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions .......................1
Introduction of the special functions.........3
Installation and adjustment ..................3
Install the water inlet hose............5
Using process
Preparation
before washing .............7
Put in the laundries .........................8
Put in the detergent .......................9
Use the operation buttons ................10
Close the top lid ........................14
Finish washing ............................14
Disposal after washing ....................15
Trouble shooting Answer to question.....16
Packing list ...................................17
Specification.........................the back cover
Please read this manual carefully before use.
Please retain it attentively for future reference.
Please check if the power receptacle is earthed
reliably before usage to guarantee your safety.
The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Please insert the power cord into special rece- The power cord plug should be convenient
ptacle with rated voltage.If the power cord is to be pluged in or pluged out with hand
three-phase wire,please use three-phase rec- while the washing machine runs normally.
eptacle.The earthing terminal of the receptacle Be sure to pull the plug out and close the
must be earthed reliably.If it is two-phase wire, water tap when the machine is idle,when
please guarantee that the earthing wire is ear- moving the machine,or when cleaning
thed reliably.If possible ,please adopt electric the machine.Do not use wet hand to ins-
leakage protector.
ert or pull out the power plug.
Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or
nip it with weight.If the power cord or the power plug is bad, or the power plug becomes
flexible,to avoid risk it is required to have it replaced by the technicians of our special
shop or the after-sale service department. Keep the pin of the power plug clean,if the
power plug is polluted with dust,please wipe with dry cloth carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Do not let the children
climb the washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
etrol
er
P
Thinn
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent your laundries and washing
.
Please keep the lint filter in good condition,
and install it to proper position. If the lint
filter is lost or damaged, please contact
the local after-sales service department of
our company.
machine from damage,be sure to take
out all of the foreign materials from your
pocket,such as coins,buttons,sand or
hair pins etc.
Before washing,please check if the water
tap is open ,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming was-
hing powder
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions
Before Using
"Hand scrub" wash:
The drum and pulsator rotate in opposite directions to form a washing
water flow similar to hand scrubbing movement, and meanwhile the
drum inner wall also take a share in washing, which obviously increase
the washing intensity.
Open-cover alarm function
During washing cycle except the processes of water filling and draining,
the washing machine will stop operation and automatically alarm if the
top cover is opened.
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the bottom plate
Back
After you open the package, please lean
the washing machine gently down on soft
Front
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of
Soft items
the machine with the eight screws by
a cross screwdriver, then lift the machine
up gently. See to the figure:
Screw
Bottom plate
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
adjustable nut
Fasten
adjustable foot
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
Loosen
High
Low
2.Fasten the nut after adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
How to change the direction of the drain hose
1.Lean the machine down gently with the front
surface facing the ground. Loosen the eight
screws by a cross screwdriver.
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
Bottom plate
Back
Push the drain hose
into the groove with
hands at this point
Front
Soft item
2.Pull out the drain hose from the groove at the
right side.
4.Install the bottom plate (as per indicated before),
then lift the machine up gently.
Use groove at
this side after
direction changing
Page 3
Usage of the drain hose
The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 26mm, and the length shall
not exceed 1.5m.
2.Do not trample or press the drain hose.
If the extra hose is too long, cut it
either at A or at B point.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Install the water inlet hose
Confirm the water tap
Water tap,not suitable
Water tap,suitable
Outlet end surface
>10mm
It is required that the front end shall be longer than 10mm.
The outlet end surface of the tap shall be flat and smooth. If not please file it to
avoid leakage.
Connection between the water inlet hose jointer and
the water tap
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet
hose jointer from the water inlet hose component. See to Figure 1.
2.Loosen the screw till the water tap can be accessed. Put the jointer of the water
inlet hose on the tap. See to Figure 2. (If the tap diameter is too large and the jointer
can not be set on the water tap, please loosen the four screws and take out the
bushing in the jointer. See to the figure3.)
Water inlet pipe jointer
Screw
Slider
Mark label
Screwdriver
bushing
Locking lever
Water inlet pipe
Figure 1
Figure 2
Figure 3
3.Fasten the four screws evenly. See to Figure 4.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure.
See to Figure 5.
Remarks: Before twisting the fastening nut, the thread is 4mm above the
upper surface of the nut. After twisting the fastening nut, the thread is 2mm
above the upper surface of the nut. See to Figure 6.
About 4mm before twisting
About below 2mm after twisting
Nut
Figure 4
Figure 5
Figure 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Connection between the water inlet hose and the
washing machine
1.Do not take off the water absorption
cushion. Please check if the cushion
is dropped or damaged before each
usage. If it happens please contact
our after-sale department immediately.
2.Put the nut of the water inlet hose on
the valve jointer.
Nut of the water inlet hose
3.Fasten the nut. Swaying it gently to
confirm if it's suitable.
Water absorption cushion
Jointer of the water inlet valve
Connection between the jointer of the water inlet
hose and the water inlet hose
1.Push down the slider. Insert the
Jointer of the
water inlet hose
water inlet hose into the jointer.
2.Hang the lock lever to the jointer.
Release the slider till a click
sound is heard.
Slider
Locking lever
Check the connection between the jointer of the
water inlet hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
tap, and the installation of the
water inlet hose are firm, so as to
prevent dropping from improper
Take down the water inlet hose
1.Close the water tap.
2.Press the locking lever. Push down the slider. Then
pull off the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be kept on the tap to prevent
damaging the fixing screw.
Locking lever
Slider
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
1 Preparation before washing
Preparation before washing
1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket. Fasten the
The quantity of
When the pulsator
there's special Take out the
requirment for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion,please
put the laundries
with buttons into
other laundries.
a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not waterabsorbing,please put them into water with hands.
d.For laundries with much soil,please remove the soil first.You can add detergent on the
part with serious soil directly.It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before
putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,
please put them into mesh bag before wasing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition that can be washed
or spinned in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 7.0kg.
The thickness, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 1.0kg, so as to avoid splashing of water.
To wash thin laundries like the stocking, silk etc.,
please first put them into washing mesh bag (which
can be purchased separately) before wash.
Reference weight of the laundries:
working suit up,down
cotton,about 1120g
jeans about 800g
blanket
cotton,about 900g
blending coat
(about 800g)
pajamas
jacket
cotton,about
800g
shirt
cotton,about
300g
single bed sheet
cotton,about 600g
undershirt
cotton,about 180g
Socks
blending,about 50g
underpants
cotton,about 70g
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Put in the detergent
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
Inlet box of the detergent
The instant dissolving of the washing
powder:
How touse thewhitener
1.Prepare warm water of 30 and a
container.
2.Add the powder while stirring to
fully dissolve it.
The powder is more prone to pollute
the laundries than the detergent.
Therefore please use it with proper
quantity.
It is suggested not to use high
sudsing detergent.
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
Different washing powders have
different dosage. Please refer to the
usage manual of the washing powder
for the details.
Standard usage quantity of the detergent and water
quantity
Common powder
Concentrated
powder
(Add 25g in each
30L water)
Laundries
quantity(kg)
Water level Water quantity
(Add 40g in each
30L water)
10
9
About 42L
About 38L
About 56g
About 35g
Above 3.5
2.5~3.5
About 50.5g
About 31.5g
About 35L
About 33L
About 46.5g
About 44g
About 29g
About 27g
8
7
6
5
About 31L
About 28L
About 41g
About 37g
About 26g
About 23g
1.5~2.5
0.5~1.5
4
3
About 26L
About 23L
About 34.5g
About 30.5g
About 22g
About 19g
2
1
About 18L
About 15L
About 24g
About 20g
About 15
About 12.5g
Below 0.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
4 Use the operation buttons
a. Description of the function of the buttons
Mode and meaning of the indicator light
Flashing: indicate the running program
On: indicate the program about to run, or
indicate the selected mode
rocess select"button
" P
Flashing rapidly: indicate abnormal condition
.
9
7
5
3
1
10
8
STANDARD
SOAK
6
JEANS
WASH
RINSE
4
GENTLE
2
QUICK WASH
SPIN
Water
level
Selection
Program
Selection
Procedure
Selection
Water level button
"Program select" button
You can select from the following four programs.
Standard Normal wash
The user selects a suitable water level depending
on the load.
If "Quick" wash is selected, water level will
indicate "2". After water level reaches "2", it will
wash while water filling, and wash normally upon
the water level reaching "4".
Large, thick or heavily soiled laundry
Gentle
Woolen textiles or underwear
Quick
10 min quick wash for load below 2 Kg
After washing for 1 min, pressing "Water level"
button will enable supplemental water filling, which
will stop automatically upon the water reaching
overflow level.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
"Start/Pause"button
"Power On/Off"button
After the power is switched on, press it to
start the machine
Press "Power On/Off" button to connect
power supply.
During working, push it to pause working.
During pause, push this button to restart
and continue operation.
After power is connected, pressing this
button will cut off the supply.
Nixie tube
To indicate -- during sensing.
To indicate remaining min. During
program running.
To indicate remaining reserved
time (hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 16)
Page 16
MIN
Time left
XQB70-10
POWER
ON / OFF
START
PAUSE
Reservation
Button of Reservation
The nixie tube displays the cycle
remaining min, during running.
tube display time left (minutes).
Pressing the button, the nixie tube
displays the reserved hrs to the wash
cycle end. The indicator flashes to
indicate in-reservation.
Remarks: After pressing "Power On/Off" to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Operating procedure and explanations for the
buttons
b.
9
7
5
3
1
10
8
NORMAL
SOAK
6
BIG CLOTHING
GENTLE
WASH
RINSE
XQB70-10
4
2
QUICK WASH
SPIN
POWER
ON / OFF
WATER
LEVEL
SELECTION
START
PAUSE
PROGRAM
SELECTION
PROCEDURE
SELECTION
RESERVATION
1 Press the "Power On/Off" button to switch on
the power supply
Power
On/Off
2 Press the button of "Program Selection" to
select a suitable full-automatic program
Program
selection
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "Program" to get the corresponding indicator on. Refer to the
"Button of 'program'"paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
Page 11
When "standard" or "Jeans" program is selected, the
washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and
wash duration according to the cloth nature and weight
3 Press the button of "process selection" to select suitable processes.
Process
Select
After the power is switched on, the washing machine will automatically set a normal program
comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button
of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the
paragraph "Processes selecting".
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing Selected procedure
the"select"button program
Contents(the lighted indicators
indicate the programs about to run)
Applicable procedure
When the common laundries
need washing, rinsing and
spinning.
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
0
1
2
3
4
5
Wash,rinse,spin
Wash(the washing
liquid remains in the
tub)
Repeat using the washing
liquid
Wash,rinse(the
rinsing liquid remains
in the tub)
The laundry needn't spin to
avoid wrinkles
When the laundries need
rinsing and spinning after
manual washing
Rinse,spin
When the laundries need only Soak Wash Rinse Spin
spinning after manual
washing (first drain then spin)
Spin(spin after drain)
Soak,wash,rinse,spin
Soak Wash Rinse Spin
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
If you push the "Process selector" button for 6 times, it will resume the original
mode, and it will circulate like that.
If you select the"Speedy wash" program, you have to set the full procedure of wash,
rinse and spin. The procedure can not be selected.
4 Press the "water level" button to select suitable
water level
Water
level
After switching on the power, press the button "Water level" to select a water level according
to the load. Please refer to the paragraphs “Detergent standard dosages and water levels"
and "Button of Water level" on page 10.
Page 9
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Time list of each program (minute)
Wash
(min)
Rinse
(min)
Spin
(min)
Water
level
Program
Standard
Total time(min)
About 35~47
1~10
Rinse twice,each about 4
Rinse twice, each abut 4
About 6
Jeans
About 35~48
1~10
About 5.5~6.5
About 10
About 24
About 2
About 2
Gentle
Quick
About 4
1~10
About 3
About 3
Rinse once, about 4
Rinse twice, about 4
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Standard or Jeans program could combine the process of soak during which the washing
machine firstly soak for about 15~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
5 Push the "Reservation" button to select
suitable reserve program
Reserve
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation"
button to set a reserved wash program. Refer to "The button of Reservation" on page 11.
Confirm the reserve program
When "Reservation" becomes active, the nixie tube
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
the washing will finish
about 18 hours later
Start
Pause
6 Press the "start/pause" button
5 Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
After Finishing wash
alarm automatically
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Time list of each program (minute)
Wash
(min)
Rinse
(min)
Spin
(min)
Water
level
Program
Standard
Total time(min)
About 35~47
1~10
Rinse twice,each about 4
Rinse twice, each abut 4
About 6
Jeans
About 35~48
1~10
About 5.5~6.5
About 10
About 24
About 2
About 2
Gentle
Quick
About 4
1~10
About 3
About 3
Rinse once, about 4
Rinse twice, about 4
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Standard or Jeans program could combine the process of soak during which the washing
machine firstly soak for about 15~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
5 Push the "Reservation" button to select
suitable reserve program
Reserve
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation"
button to set a reserved wash program. Refer to "The button of Reservation" on page 11.
Confirm the reserve program
When "Reservation" becomes active, the nixie tube
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
the washing will finish
about 18 hours later
Start
Pause
6 Press the "start/pause" button
5 Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
After Finishing wash
alarm automatically
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department or
after-sale service department of our company. Do not repair it by yourself.
Phenomena
The reason
How to settle
Buzzing upon reservation starts,
Nixie tube indicates "E0"
The top lid is not closed
Close the top lid
Put down thedrain hose. Open
and close thetop lid once.
Clean the foreignmaterial.
Open and closethe top lidonce.
Is the drain hose put down?
No or slow drain, nixie tube
indicates "E1" , buzzing.
Is the drain hose blockedby
foreign material?
Running pauses during spin,
nixie tube indicates "E3",
buzzing
The top cover leaves open
Close the top lid
Are the laundriesput slantingly?
Is the machine slanting?
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3", buzzing
Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
The water tap is not open
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates "E4",
buzzing
The water inlet valve is blocked
The water pressure is too low
and the current istoo small
Poor or no waterfall flow
If the nozzle is choked with
foreign bodies
Remove the foreign bodies
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
Affusion to the set water level.
Not wash
The machine does
not act
Does the water level arrive at the
set water level?
Is the power plug loose?
Is the top lid closed?
Insert the power plug tightly.
Close the top lid
Put the laundries orderly.
Not spin
Are the laundries put orderly?
Is the machine slanting?
Level the machine properly.
Re-order the laundries.
There's abnormal sound inside the
machine
Are the laundries slanting in
spinning?
Is the jointer screw of the water
inlet hose is loose or twisted
awry?
Fasten the jointer screw
properly.
The water faucetleaks
Download from Www.Somanuals.com. All Manuals Search And Download.
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Balance the laundries to avoid slanting.
Push the "Procedure selection" button to
select "Spin", but it doesn't work.
The program is setting the drain time. Some time is
needed before it starts spinning.
There may be some water flowing out of
the drain hose in the first use of the machine.
It is the water remained in the factory inspection of
performance.
While water filling in wash and rinse, the
pulsator pauses rotation
To prevent splash during water filling.
Wash pauses
Supplementary water filling 48 s after
sensor tests cloth material.
Packing list
Name
Quantity
Storage position
Inside the document bag
User's manual
One
Components of the water
inlet hose
Inside the accessory bag
One
One
Between the upper cushion of the washing machine
package and the upper seal of the package carton
Bottom plate
Inside the accessory bag
Tapping screws ST4x16
Eight
One
Automatic washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Model
XQB70-10
220V~ 50Hz
Rated voltage frequency
7.0kg (weight of standard dry cloth)
Rated washing / spinning capacity
Water level/Water quantity (about)
Max water consumption
pressure
About 126L (High water level; Standard program)
0.03MPa-0.78MPa
350W
Rated washing power
Rated spinning power
Weight
255W
About 26kg
Dimension
L 537mm W 520mm H 890mm
Download from Www.Somanuals.com. All Manuals Search And Download.
|