Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. Warranty and Service .................................................... 3
2. Preface ......................................................................... 4
3. Description of Warning Symbols..................................... 5
4. Safety Notices ............................................................... 6
5. Regulatory Information ................................................ 14
6. Introducing the TV ....................................................... 16
Features.................................................................. 16
7. Checking Package Contents ........................................ 17
8. Getting to Know Your TV ............................................. 18
Front View ............................................................... 18
Input and Output Ports ............................................. 19
9. Getting Started............................................................ 20
Connecting to an Antenna or Cable TV ..................... 20
Connecting to AV Devices ........................................ 21
Connecting to a VCR/VCD/DVD Player ................ 21
Connecting to a Video Camera ............................ 22
Connecting to a Game Device ............................. 23
Connecting External Speakers or Headphones.......... 24
Connecting the Power Adapter ................................. 25
10. Using the TV .............................................................. 26
Using the Remote Control ........................................ 26
Turning the TV On and Off ....................................... 27
Selecting Channels .................................................. 28
Switching Source Signals ......................................... 28
Adjusting the Volume ............................................... 29
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
11. Adjusting On-Screen Display (OSD) Settings ............... 30
Brightness ............................................................... 31
Contrast .................................................................. 32
Video Setting ........................................................... 33
Hue .................................................................... 34
Saturation ........................................................... 35
Sharpness .......................................................... 36
Color Temperature .............................................. 37
Audio Setting ........................................................... 38
Treble................................................................. 39
Bass ................................................................... 40
Balance .............................................................. 41
TV Setting ............................................................... 42
TV/CATV ............................................................ 43
MTS ................................................................... 44
Auto Program...................................................... 45
Manual Program.................................................. 46
Channel Add/Erase ............................................. 47
Miscellaneous Setting .............................................. 48
OSD Position ...................................................... 49
Language ........................................................... 50
Sleep Timer ........................................................ 51
OSD Display ....................................................... 52
Reset ................................................................. 53
12. Taking Care of Your TV .............................................. 54
13. Troubleshooting.......................................................... 55
14. Specifications ............................................................. 57
15. Glossary .................................................................... 58
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Warranty and Service
The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.
Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.
The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the “Warranty and Service Manual" for the
detailed warranty information.
Hannspree provides complete service information in the included "War-
ranty and Service Manual", or directly from Hannspree global customer
service center. Our service representatives will be very happy to serve
you to your satisfaction.
Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800
The Hannspree e-mail address:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Preface
This manual is designed to assist users in setting up and using the
LCD TV. Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change
without notice.
Copyright
© Copyright 2003 Hannspree, Inc.
All rights reserved. This product and related documentation are pro-
tected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Description of Warning Symbols
Warning
Caution
This symbol is used to remind
users to pay attention to
important descriptions regard-
ing usage and maintenance
(repair) or additional impor-
tant information related to this
product.
This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal non-
insulated components.
Electric Power Notice
Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety Notices
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.
2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.
3. If the power cord or plug is damaged or worn, unplug it immedi-
ately and contact a qualified service technician for mainte-
nance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave sufficient distance between the
TV and the wall to provide enough space for the emission of heat.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Proceed
1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.
2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.
3. Follow the product and warning label instructions.
4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.
Warning
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Power
To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:
• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimal Viewing Distance
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Protect the power cord from being walked on
or pinched particularly at the plug, conve-
nience receptacles, and the point where they
exit from the apparatus.
11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Safety
To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.
Dangerous high-voltage electric power compo-
nents are located inside the TV. To avoid electric
shock, do not disassemble the casing.
Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an elec-
tric shock or a fire.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.
If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.
The screen of the TV is made of glass, be care-
ful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.
Do not allow children to use the TV unattended
to avoid accidents caused by improper opera-
tion.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.
Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.
Install the outdoor antenna far from power trans-
mission lines to avoid possible danger.
Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
V
The plug can be inserted into an outlet in only
one direction. Notify a qualified service techni-
cian if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this man-
ual, notify a qualified service technician immedi-
ately. Do not attempt any methods not covered in
this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the ser-
vice technician to complete a safety inspection
before switching the power on after completing
any maintenance.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to nearby radio and tele-
vision reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equip-
ment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
1. applies only to products purchased in the United States of America
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Direc-
tive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-
ment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Introducing the TV
Thank you for purchasing this
Liquid Crystal Display TV. Your
LCD TV is designed to be safe,
versatile, and easy to use. The
frog design, the bear design and
the rabbit design all make
wonderful addition to any room.
You can watch broadcast or cable
television channels, and easily
connect a VCR, VCD, or DVD player or a game device to the
standard RCA and S-Video input ports that are included in the 4-IN-1
cable.
Convenient control buttons located on the front panel and a handy
remote control let you change channels, adjust the volume, and
change display settings through an easy-to-use on-screen menu
system. The built-in stereo speakers provide full, rich sound and a
convenient audio output port lets you connect to an external audio
system or headphones.
Features
• 9.6-inch color TFT LCD TV
• Safe and sturdy construction
• Built-in TV tuner
• 4-IN-1 cable
• On-Screen Display (OSD) menu system
• Built-in speakers: bear 3W+3W,frog 2W+2W,rabbit 2W+2W
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Checking Package Contents
Make sure the following components are included in the box. Contact
your vendor immediately if anything is missing or damaged.
TV
Warranty and
Service Manual
User’s Manual
Quick Start Guide
User's M
anual
Q
uick Start
G
uide
Wa
rranty an
d service
manual
Wire Material Package
Power Cord
Power Adapter
4-IN-1 Cable
RCA Jack x 3
G
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting to Know Your TV
Front View
power menu
vol
ch
source
1
2
3
4
5
6
6
Signal sensor
Description
Function
Power/Power
LED
Turns the TV on and off. Green LED inde-
cates power on.
1
2
3
Turns the On-Screen Display (OSD)
menus on and off.
Menu
Press VOL+ to increase the volume.
Press VOL– to decrease the volume.
Adjust volume
Changes channels. Press CHꢀto
increase the channel number. Press CHꢁ
to decrease the channel number.
4
Select channel
Selects the input source to be displayed
(TV/CATV, AV, or S-Video).
5
6
Source
Stereo speakers
Play audio content.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Input and Output Ports
HEADPHONE
DC 12V
AV in
ANT
2
3
HEADPHONE
1
AV in
DC-IN
4
ANT
Description
Function
Connects to the included power
adapter.
1
2
DC-IN
Connects to headphones or other
audio device.
HEADPHONE
Connects to VCR/VCD/DVD player
CVBS RCA cables or a game
device.
3
4
AV in
ANT
Connects to an antenna or CATV
cable television line.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Getting Started
Connecting to an Antenna or Cable TV
1 Connect one end of the UHF or CATV cable to the ANT Jack
(VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Antenna
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
AV in
DC-IN
Antenna/CATV
socket
ANT
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 45.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to AV Devices
Connect external devices such as a VCR, VCD or DVD player, or
video game to the TV using the 4-IN-1 cable.
Connecting to a VCR/VCD/DVD Player
The illustration presented here shows how to connect the TV to a
VCR and VCD or DVD player. Actual connections may vary accord-
ing to the make and model of the device. Refer to the user’s manual
included with the device for more detailed instructions.
VCR
VCD
DVD
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
AV in
B
R W
Y
DC-IN
ANT
AV
S-Video
connector
connectors
4-IN-1 jack
4-IN-1 cable
Note
The cables are color-coded (black, red, white, yellow). Connect each color-
coded cable to the appropriate connector on your device.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Video Camera
The instructions presented here are a general guide to connecting
the TV to a camcorder or other type of digital camera. Actual connec-
tions may vary according to the make and model of the device. Refer
to the user’s manual included with the camcorder or camera for more
detailed instructions.
S
WB
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
AV in
DC-IN
S-Video
connector
ANT
B
R
W
Y
4-IN-1 jack
4-IN-1 cable
AV connectors
Note
The cables are color-coded (black, red, white, yellow). Connect each color-
coded cable to the appropriate connector on your device.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Game Device
The instructions presented here are a general guide to connecting
the TV to a game device using the RCA Jacks provided (some game
devices may require a unique adapter that is not provided). Actual
connections may vary according to the make and model of the game
device. Refer to the user’s manual included with the game device for
more detailed instructions.
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
AV in
DC-IN
B
R W
Y
ANT
4-IN-1 jack
S-Video
connector
AV
connectors
4-IN-1 cable
Notes
• Connect the 4-IN-1 cable connectors to the corresponding connectors on
your game device adapter.
• If the 4-IN-1 cable does not fit the game device, then insert the included
RCA jack between the 4-IN-1 cable and the game device.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Speakers or Headphones
External speakers or headphones may be used to listen to the TV
rather than using the built-in speakers. Connect external speakers or
headphones to the headphone line out port as illustrated.
Headphones
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
AV in
DC-IN
Speakers
ANT
Speaker/Headphone
line out port
Notes
•
•
External speakers or headphones are not included with the product.
The internal TV speakers will not output sound when headphones are
plugged in.
•
Use external speakers with amplifiers only.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power Adapter
1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the
rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Power outlet
Three-pronged
plug
HEADPHONE
DC 12V
AV in
ANT
HEADPHONE
Power cord
AV in
DC-IN
ANT
DC-IN
Power adapter
25
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 5 meters
from the front of the TV’s signal sensor. Do not exceed an angle of 30
degrees when pointing at the signal sensor. Refer to the following
illustration.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TV On and Off
1 Press the POWER button on the
control panel (or remote control).
The power LED on the top of the
TV changes from dark to green,
indicating that the power has been
turned on.
Power
LED
power menu
vol
ch
source
2 Press the POWER button again;
the power LED changes from
green to dark, indicating that the
TV is in off mode.
TV:10
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Channels
Press the CH UP button and the
CH DOWN button on the control
panel to select the channel or
enter the specific channel num-
ber by pressing the number but-
tons on the remote control.
Channel down
Channel up
power menu
vol
ch
source
Switching Source Signals
Press SOURCE to select the
Current source setting
incoming source signal.
power menu
vol
ch
source
The current source setting
(TV/CATV, S-Video, or AV)
appears on the top left corner of
the screen.
S-VIDEO
Note
The TV supports S-Video input in
addition to normal video and audio
signals.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press the
VOL DOWN button to decrease
the volume. The volume level is
displayed on the TV.
Volume up
Volume down
power menu
vol
ch
source
Press the MUTE button on the
remote control to turn the sound
off. Press the MUTE button on
the remote control or press the
VOL UP/VOL DOWN button to
turn the sound on.
48
Volume level
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting On-Screen Display (OSD)
Settings
11
The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust your TV’s settings. This chapter describes
how to change each of the available settings.
The OSD can be used with either the remote control or the front con-
trol panel.
Button Descriptions
Control Panel
MENU
CH UP
MENU
CHꢀ
CH DOWN
Enter
CHꢁ
MENU
The following sections explain how to adjust settings in the OSD
menus using the panel control.
OSD Setting Menu
Main Menu
ETO
menu
ch
Video Setting
ENTER
Press the MENU button to enter
The Main Menu appears
the OSD menus.
Note
To exit the OSD menus at any time, press the CH UP button or CH DOWN to
select Exit . Then press MENU to exit the OSD menus. Also, after you
finish setting OSD parameters, follow these instructions to exit the OSD
menus; alternatively, wait 15 seconds for the OSD to close automatically.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
1 Press MENU to enter the OSD
Main Menu
menus.
ETO
Brightness
2 Press the CH UP button or CH
DOWN button to select Brightness.
50
3 Press MENU. The brightness slide
ENTER
bar appears.
4 Press the CH UP button to increase
the brightness.
5 Press the CH DOWN button to
decrease the brightness.
6 Press MENU to confirm the setting
and return to the Main menu.
Notes
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
BRIGHTNESS
100
50
0
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
1 Press MENU to enter the OSD
Main Menu
menus.
ETO
Contrast
2 Press the CH UP button or CH
DOWN button to select Contrast.
50
3 Press MENU. The contrast slide
ENTER
bar appears.
4 Press the CH UP button to increase
the contrast.
5 Press the CH DOWN button to
decrease the contrast.
6 Press MENU to confirm the setting
and return to the Main menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
CONTRAST
100
50
0
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Setting
Main Menu
ETO
menu
ch
Video Setting
ENTER
Press the MENU button to enter
the OSD menus.
1 Press the CH UP button or CH
DOWN button to select Video
Setting.
2 Press MENU to enter the
Video Setting menu.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Hue
1 Press the CH UP button or CH
DOWN button to select Hue.
Video Setting
G
R
B
Hue
2 Press MENU to enter the Hue
G
R
menu.
50
3 Press the CH UP button to increase
the hue towards the red spectrum.
The image becomes more red.
ENTER
4 Press the CH DOWN button to
decrease the hue towards the
green spectrum. The image
becomes more green.
5 Press MENU to confirm the setting
and return to the Video Setting
menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
HUE
100
50
0
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturation
1 Press the CH UP button or CH
DOWN button to select Saturation.
Video Setting
G
R
B
Saturation
2 Press MENU to enter the
50
Saturation menu.
3 Press the CH UP button to increase
the saturation. The screen image
becomes more vibrant.
ENTER
4 Press the CH DOWN button to
decrease the saturation. The
screen image becomes less
vibrant.
5 Press MENU to confirm the setting
and return to the Video Setting
menu.
Note
The new setting is confirmed automati-
cally when the OSD times out.
MAX
MID
MIN
SATURATION
100
50
0
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
1 Press the CH UP button or CH
DOWN button to select Sharpness.
Video Setting
G
R
B
Sharpness
2 Press MENU to enter the
50
Sharpness menu.
3 Press the CH UP button to increase
ENTER
the sharpness.
4 Press the CH DOWN button to
decrease the sharpness.
5 Press MENU again to confirm the
setting and return to the Video
Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
SHARPNESS
100
50
0
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature
1 Press the CH UP button or CH
DOWN button to select Color.
Video Setting
G
R
B
Color
2 Press MENU to enter the Color
menu. The following three color
temperatures are available.
ENTER
Standard Color
Press the CH UP button or CH DOWN
button to select Standard, then press
MENU.
Warm Color
Press the CH UP button or CH DOWN
button to select Warm, then press
MENU.
Cold Color
Press the CH UP button or CH DOWN
button to select Cold, then press MENU.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setting
Main menu
ETO
menu
ch
Audio Setting
ENTER
Press the MENU button to enter
the OSD menus.
1 Press the CH UP button or CH
DOWN button to select Audio
Setting.
2 Press MENU to enter the
Audio Setting menu.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Treble
1 Press the CH UP button or CH
DOWN button to select Treble.
Audio Setting
Treble
2 Press MENU to enter the Treble
48
menu.
3 Press the CH UP button to increase
ENTER
the treble.
4 Press the CH DOWN button to
decrease the treble.
5 Press MENU to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed automati-
cally when the OSD times out.
MAX
MID
MIN
Treble
100
50
0
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Bass
1 Press the CH UP button or CH
DOWN button to select Bass.
Audio Setting
Bass
2 Press MENU to enter the Bass
48
menu.
3 Press the CH UP button to increase
ENTER
the bass.
4 Press the CH DOWN button to
decrease the bass.
5 Press MENU to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed automati-
cally when the OSD times out.
MAX
MID
MIN
Bass
100
50
0
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
1 Press the CH UP button or CH
DOWN button to select Balance.
Audio Setting
Balance
50
2 Press MENU to enter the Balance
L
R
menu.
3 Press the CH DOWN button to shift
ENTER
the balance to the left speaker.
4 Press the CH UP button to shift the
balance to the right speaker.
5 Press MENU to confirm the setting
and return to the Audio Setting
menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
Balance
R (100)
50
L (0)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setting
Main Menu
ETO
menu
ch
TV Setting
ENTER
Press the MENU button to enter
the OSD menus.
1 Press the CH UP button or CH
DOWN button to select TV
Setting.
2 Press MENU to enter the TV
Setting menu.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/CATV
1 Press the CH UP button or CH
DOWN button to select TV/CATV.
TV Setting
AUTO MENU
SET SET
Channel
-
+
TV/CATV
2 Press MENU to enter the TV/CATV
menu. The following choices are
available.
CATV
TV
ENTER
Receiving Broadcast TV
TV Setting
AUTO MENU
SET SET
Channel
-
+
Press the CH UP button or CH DOWN
button to select TV, then press MENU.
TV/CATV
CATV
TV
ENTER
Receiving Cable TV
TV Setting
AUTO MENU
SET SET
Channel
-
+
Press the CH UP button or CH DOWN
button to select CATV (default), then
press MENU.
TV/CATV
CATV
TV
ENTER
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS
1 Press the CH UP button or CH
DOWN button to select MTS.
TV Setting
AUTO MENU
SET SET
Channel
-
+
MTS
2 Press MENU to enter the MTS
menu.
SAP DUAL
MAIN
ENTER
MAIN
TV Setting
AUTO MENU
SET SET
Channel
-
+
1 Press the CH UP button or CH
DOWN button to select MAIN
(default). MAIN is highlighted in
red.
MTS
SAP DUAL
MAIN
2 Press MENU again to confirm the
ENTER
selection.
SAP
TV Setting
AUTO MENU
SET SET
Channel
-
1 Press the CH UP button or CH
DOWN button to select SAP. SAP is
highlighted in red.
+
MTS
SAP DUAL
MAIN
2 Press MENU again to confirm the
ENTER
selection.
DUAL
TV Setting
AUTO MENU
SET SET
Channel
-
1 Press the CH UP button or CH
DOWN button to select DUAL.
DUAL is highlighted in red.
+
MTS
SAP DUAL
MAIN
2 Press MENU to confirm the selec-
ENTER
tion.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Program
1 Press the CH UP button or CH
DOWN buttons to select Auto
Program.
TV Setting
AUTO MENU
SET SET
Channel
-
+
AUTO Program
2 Press MENU to enter the Auto
NO
YES
Program menu.
ENTER
3 Press the CH UP button or CH
DOWN buttons to select Yes or No.
4 Press MENU.
The screen goes blank and the chan-
nel indicator values range from 2 to
69 (antenna connection) or from 1 to
125 (CATV cable connection).
Channel
Indicator
The screen displays the first channel
that is successfully found after scan-
ning is complete.
TV:10
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Program
This function allows you to locate channels for adding to or erasing
from preset channels.
1 Press the CH UP button or CH
TV Setting
AUTO
MENU
DOWN button to select Manual Pro-
SET SET Cha+n-nel
Manual Program
gram.
Up
3
DOWN
2 Press MENU to enter the Manual
Program menu.
ENTER
3 Press the CH UP button or CH
DOWN button to find the channel
you want to add.
4 When you have found the channel,
press MENU.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Add/Erase
Channel to be added or erased must be selected from Manual Program.
1 Press the CH UP button or CH
TV Setting
DOWN button to select
AUTO MENU
SET SET
Channel
-
+
CH.Add/Erase.
CH.Add/Erase
2 Press MENU to enter the CH.
Add/Erase menu. Select one of the
following options.
Add
Erase
3
ENTER
Add Channel
1 Press the CH UP button to select
Add.
2 Press the MENU to add the
selected channel.
Erase Channel
1 Press the CH DOWN button to
select Erase.
2 Press MENU to delete the selected
channel.
When you return to the normal TV
screen and use the CH UP/CH DOWN
buttons to browse channels, the
deleted channel (for example,
Channel 3) is skipped automatically.
Note
You can still access the deleted channel by
entering the channel number using the
number buttons on the remote control.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous Setting
Main Menu
ETO
menu
ch
Miscellaneous
ENTER
Press the MENU button to enter
the OSD menus.
1 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
2 Press MENU to enter the Mis-
cellaneous menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Position
1 Press the CH UP button or CH
DOWN button to select OSD
Position.
OSD Position
OSD
OSD
H - P o s i t i o n
2 Press MENU to enter the OSD
50
Position menu.
ENTER
The following options are available.
Horizontal Position
1 Press the CH UP button or CH
OSD Position
OSD
OSD
DOWN button to select H. Position.
H - P o s i t i o n
2 Press MENU.
48
3 Press the CH DOWN button to
move the OSD screen to the left.
Press the CH UP button to move
the OSD screen to the right.
ENTER
4 Press MENU to confirm the setting.
Vertical Position
1 Press the CH UP button or CH
DOWN to select V. Position.
OSD Position
OSD
OSD
V- P o s i t i o n
48
2 Press MENU.
3 Press the CH DOWN button to
move the OSD screen downward.
Press the CH UP button to move
the OSD screen upward.
ENTER
4 Press MENU to confirm the setting.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
1 Press the CH UP button or CH
DOWN button to select Language.
Miscellaneous
Z
CH
Z
OSD
Z
Language
English
2 Press MENU to enter the Language
menu.
ᕷᥟύЎ
The screen displays the available
OSD languages: English and
T-Chinese (Traditional Chinese).
ENTER
3 Press the CH UP button or CH
DOWN button to select a language.
Miscellaneous
Z
CH
Z
OSD
Z
Language
English
4 Press MENU to confirm your
ᕷᥟύЎ
choice.
ENTER
Note
The default language setting is Traditional
Chinese.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
The sleep timer turns the TV off automatically after a set period of
time.
1 Press the CH UP button or CH
Miscellaneous
Z
DOWN button to select Sleep.
CH
Z
OSD
Z
Sleep
2 Press MENU to enter the Sleep
30 60 90 120
OFF
menu.
3 The screen displays the available
ENTER
sleep timer setting:
– Off
– 30 minutes
– 60 minutes
– 90 minutes
– 120 minutes
4 Press the CH UP button or CH
DOWN button to select a setting.
Miscellaneous
Z
CH
Z
OSD
Z
Sleep
5 Press MENU to confirm your
30 60 90 120
OFF
choice.
ENTER
51
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Display
This setting allows you to set whether information such as the
selected channel is shown on the TV screen when the DISPLAY
button is pressed.
1 Press the CH UP button or CH
Miscellaneous
Z
DOWN button to select OSD
CH
Z
OSD
Z
OSD Display
Display.
Off
On
2 Press MENU to enter the OSD
Display menu.
ENTER
3 Press the CH UP button or CH
DOWN button to select On or Off.
4 Press MENU to confirm your
choice.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset
The Reset function returns all of your TV’s user settings to their fac-
tory defaults.
Warning:
The reset function will erase all of your custom and favorite channel
settings, and will reset all display settings (such as contrast,
brightness, etc.) to the factory default values. The reset function
cannot be reversed once it begins.
1 Press the CH UP button or CH
Miscellaneous
Z
DOWN button to select Reset.
CH
Z
OSD
Z
Reset
2 Press MENU to enter the Reset
No
Yes
menu.
3 Press the CH UP button or CH
DOWN button to select Yes or No.
By default, No is already selected
(highlighted in red).
ENTER
4 Press MENU to confirm your
choice.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Taking Care of Your TV
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
GAS
OIL
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.
Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Press the POWER button on the control
panel or remote control.
•
Press the SOURCE button to cycle through
connected video sources.
No picture and sound.
•
•
•
Press the CH UP button or CH DOWN button
to switch to other TV stations.
Check the TV/CATV OSD settings. See
“TV/CATV” on page 43.
Make sure all cables are connected properly.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus. See
“Brightness” on page 31.
No picture, or poor picture, sound is
OK.
•
Adjust the saturation in the OSD menus. See
“Saturation” on page 35.
Picture is not in color.
•
•
Press the VOL UP button on the control panel
or remote control.
Make sure the MTS option is set to Main or
Dual. See “MTS” on page 44.
Picture is OK, no sound.
•
•
Adjust the balance in the OSD menus. See
“Balance” on page 41.
One of the speakers has no sound.
Try the Auto Program function in the OSD “TV
Setting” menu. See “Auto Program” on
page 45.
Can’t receive some TV channels using
cable TV.
Want to reset TV settings.
Cannot operate menus.
•
•
Use the Reset function in the OSD menu.
If OSD items are colored light blue, the sys-
tem is in a state such that those settings are
not available. For example, video setting is
available in TV mode.
•
Make sure the video signal cable is con-
nected properly.
No image but have sound.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Situation
Solution
•
Make sure the source device is functioning
properly.
•
•
Set the volume to a higher level.
Make sure the audio cable is connected
securely.
No sound but have image.
•
•
Turn the mute off.
Make sure the video signal cable is con-
nected properly.
Screen image turns over.
•
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
Snow appears on the screen.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or change
the video signal cable.
Blurred or overlapped images.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Specifications
Bear F629-10A1
Rabbit F633-10A1
Frog F637-10A1
LCD Panel Size
Aspect Ratio
9.6-inch TFT
4:3
Best Resolution
Maximum Display Area
TV System
800 (horizontal) x 600 (vertical)
194.4 mm (H) x 145.8 mm (W)
NTSC
S-Video Input and Composite Video Input (through the
4-IN-1 cable)
Video System
Audio System
Input: RCA Jack (L/R Audio Input through the 4-IN-1
cable)
Output: 3.5mm ø headphone jack x 1
Built-in Speakers
Bear: 3W + 3W, Rabbit: 2W + 2W, Frog: 2W + 2W
Power Supply
100-240V, 50/60 Hz, 12V DC
42W (Average)
0.9W Maximum
External Speakers
3kg
Power Consumption
Power Consumption (Standby)
Optional Accessories
Weight (including base)
Bear: 263mm (H) x 212mm (W) x 115mm (D)
Rabbit: 345mm (H) x 254mm (W) x 100mm (D)
Frog: 250mm (H) x 248mm (W) x 155mm (D)
Dimensions (including base)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Glossary
Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic
waves to distribute television channels to viewers (standard TV broadcast).
CATV Community Antenna Television, the original name for cable TV. A television
distribution system that uses coaxial cable instead of the traditional radio broad-
casting (over-the-air) method to deliver television, FM radio, and other services to
consumers.
Color Temperature Adjusting the color temperature enables you to set the inten-
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-
peratures result in a blue tint. Lower temperatures result in a red tint.
DUAL Used with SAP and NTSC, enables broadcast of the main broadcast signal
on one speaker, and the alternate audio speaker on the other speaker.
Hue Colors in a color system are measured by hue, saturation and luminance.
Hue indicates the predominant color.
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules
(liquid crystals) that flow like liquid and bend light.
Main is the default audio signal belonging to a particular channel.
MTS Multi-channel Television Sound. Enables reception of audio other than the
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.
RCA connector An RCA or phono connector is a plug and socket for a two-wire
(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of audiovisual equip-
ment.
RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.
Refer to “Checking Package Contents” on page 17 and “Connecting to a Game
Device” on page 23.
SAP (Secondary Audio Program) is an audio channel used with the NTSC TV
standard for auxiliary transmission of such items as foreign language broadcasting
or teletext.
Saturation Chromatic purity indicating the amount of white contained in a color.
Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video Super-video, a video cabling standard used to transmit video by keeping
brightness (Y) and color information (C) on separate channels. Most often used
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-
tures.
VCD A compact disk format developed in 1993 by Sony and Philips to capture full-
motion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
|