9.6" Liquid Crystal Display
Television
2F, No.362, Jui-Kuang Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C.
TEL: 886-2-87520000
FAX: 886-2-87527092
DT12-10A1
User's Manual
NTSCTVTWEN1203
MAC-001141
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Connecting to AV Devices ........................................ 21
Turning the TV On and Off ....................................... 26
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Warranty and Service
The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.
Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.
The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the “Warranty and Service Manual” for the
detailed warranty information.
Hannspree provides complete service information in the included “War-
ranty and Service Manual”, or directly from Hannspree global customer
service center. Our service representatives will be very happy to serve
you to your satisfaction.
Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800
The Hannspree e-mail address:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Preface
This manual is designed to assist users in setting up and using the
LCD TV. Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change
without notice.
Copyright
© Copyright 2003 Hannspree, Inc.
All rights reserved. This product and related documentation are pro-
tected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Description of Warning Symbols
Warning
Caution
This symbol is used to remind
users to pay attention to
important descriptions regard-
ing usage and maintenance
(repair) or additional impor-
tant information related to this
product.
This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal non-
insulated components.
Electric Power Notice
Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety Notices
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.
2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.
3. If the power cord or plug is damaged or worn, unplug it immedi-
ately and contact a qualified service technician for mainte-
nance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave sufficient distance between the
TV and the wall to provide enough space for the emission of heat.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Proceed
1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.
2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.
3. Follow the product and warning label instructions.
4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.
Warning
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Power
To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:
• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimal Viewing Distance
lla
ere
inderella
TV
O
E
CE
SUOR
CH
VOL
M
MENU
102 cm
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Protect the power cord from being walked on
or pinched particularly at the plug, conve-
nience receptacles, and the point where they
exit from the apparatus.
11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Safety
To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.
Dangerous high-voltage electric power compo-
nents are located inside the TV. To avoid electric
shock, do not disassemble the casing.
Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an elec-
tric shock or a fire.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.
If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.
The screen of the TV is made of glass, be care-
ful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.
Do not allow children to use the TV unattended
to avoid accidents caused by improper opera-
tion.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.
Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.
Install the outdoor antenna far from power trans-
mission lines to avoid possible danger.
Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
V
The plug can be inserted into an outlet in only
one direction. Notify a qualified service techni-
cian if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this man-
ual, notify a qualified service technician immedi-
ately. Do not attempt any methods not covered in
this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the ser-
vice technician to complete a safety inspection
before switching the power on after completing
any maintenance.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to nearby radio and tele-
vision reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equip-
ment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
1. applies only to products purchased in the United States of America
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Direc-
tive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-
ment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Introducing the TV
Thank you for purchasing this Liquid
Crystal Display TV. Your LCD TV is
designed to be safe, versatile, and
easy to use. The design of the product
is featuring "Disney Princess,
lla
inderella
Cinderella”, which makes it a fun addi-
tion to any room.
TV
ER
W
PO
CE
SUOR
CH
L
VO
M
NU
ME
You can watch broadcast or cable
television channels, and easily connect
a VCR, VCD or DVD player to the
standard RCA and S-Video input ports
located at the rear of the unit.
Convenient control buttons located on the front panel let you change
channels, adjust the volume, and change display settings through an
easy-to-use on-screen menu system. The built-in stereo speakers
provide full rich sound and a convenient audio output port lets you
connect to an external audio system or headphones.
Features
• 9.6-inch color TFT LCD TV
• Safe, sturdy construction
• Built-in TV tuner
• Audio/video support:
– Stereo audio inputs
– Composite video inputs
– S-Video input
– 3.5 mm stereo headphone output
• On-Screen Display (OSD) menu system
• MTS bilingual channel support
• Built-in 3W+3W speakers
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Checking Package Contents
Make sure the following components are included in the box. Contact
your vendor immediately if anything is missing or damaged.
TV
inderella
nderella
M
TV
POWER
VOL
CH
MENU
SUORCE
M
TV
POWER
VOL
CH
MENU
SUORCE
Place the LCD TV into
the carriage as shown.
Warranty and Service
Manual
User’s Manual
Quick Start Guide
User's Manual
Quick Start
Guide
W
a
rranty an
d servic
m
e
anual
Wire Material Package
Power Cord
Power Adapter
G
RCA Jack x 3
S Jack x 1
4-IN-1 Cable
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting to Know Your TV
Front View
inderella
7
7
Signal sensor
TV
M
POWER
VOL
CH
MENU
SUORCE
1
2
3
4
5 6
Description
Menu
Function
Turns the On-Screen Display (OSD)
menus on and off.
1
Press VOL + to increase the volume.
Press VOL – to decrease the volume.
2
3
Adjust volume
Power LED
Green LED indicates power on.
Changes the channel. Press CH S to
increase the channel number. Press
CH T to decrease the channel number.
4
5
Select channel
Source
Selects the input source to be displayed
(TV, AV1, or AV2).
6
7
Power
Turns the TV on and off.
Play audio content.
Stereo speakers
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Input and Output Ports
4
5
6
1
4
2
3
4
Description
Function
Connects to headphones or other
audio device.
1
2
Headphone line out
DC-IN
Connects to the included power
adapter.
Connects to VCR/VCD/DVD player
CVBS RCA left and right audio
cables (white and red).
Left and right audio in
(of AV1)
3
Connects to the included 4-IN-1
cable.
4
5
6
AV2
Connects to VCR/VCD/DVD player
CVBS RCA video cable (yellow).
Video in (of AV1)
Antenna/cable TV
line in
Connects to an antenna or CATV
cable television line.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Getting Started
Connecting to an Antenna/Cable TV
1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back of the TV.
2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the Antenna socket or CATV cable.
Antenna
4
4
Antenna/CATV socket
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 44.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to AV Devices
Connect external devices such as VCD/DVD players or VCRs to the
TV using the AV1 and AV2 ports on the back of the TV.
Connecting to a VCR, VCD or DVD Player
The illustration presented here shows how to connect your TV to a
VCR, VCD or DVD player. Actual connections vary according to the
make and model of the device.
VCR
VCD
4
DVD
B R W Y
4
AV
S-Video
connector
connectors
AV2
4-IN-1 cable
Note
The cables are color-coded (black, red, white, yellow). Connect each color-
coded cable to the appropriate connector on your device.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Video Camera
The illustration presented here shows how to connect your TV to a
camcorder or other type of digital camera. Actual connections vary
according to the make and model of the device.
S
WB
4
S-Video
connector
4
AV2
B
R
W
Y
4-IN-1 cable
AV connectors
Note
The cables are color-coded (black, red, white, yellow). Connect each color-
coded cable to the appropriate connector on your device.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Speakers and Headphones
Headphones or external speakers may be used to listen to the TV
instead of the built-in speakers. Connect your headphones to the
speaker/headphone line out port as illustrated.
Headphones
4
Speakers
4
Speaker/Headphone
line out
Notes
•
•
External speakers or headphones are not included with the product.
The internal TV speakers will not output sound when headphones are
plugged in.
•
Use external speakers with amplifiers only.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power Adapter
1. Connect the power cord to the power adapter as illustrated.
2. Plug the power adapter connector into the DC-IN on the rear panel of
the TV.
3. Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Power outlet
Three-pronged plug
4
Power cord
4
DC-IN
AC power adapter
Refer to the “Power Supply Safety Notes” on page 6.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 5 meters
from the front of the TV’s signal sensor. Do not exceed an angle of 30
degrees when pointing at the signal sensor. Refer to the following
illustration.
lla
erella
inder
R
TV
POWE
E
SUORC
CH
VOL
M
MENU
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TV On and Off
1. Press the POWER button; the
power indicator LED changes from
red to green, indicating that the
power has been turned on.
inderella
2. Press the POWER button again;
the power indicator LED changes
from green to red, indicating that
the TV is in stanby (off) mode.
M
TV
POWER
VOL
CH
MENU
SUORCE
Power
Power LED
Selecting Channels
Press CH UP and CH DOWN on
the control panel to select the
channel or enter the specific
channel number by pressing the
number buttons on the remote
control.
inderella
M
TV
POWER
VOL
CH
MENU
SUORCE
Channel down
Channel up
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Source Signals
Press the SOURCE button on the
remote control or the SOURCE button
on the control panel to select the
incoming source signal.
Current source setting
inderella
C H 4 0
The current source setting CH xx
appears on the top left corner of the
screen; AV1 or AV2 appears on the
bottom right corner of the screen.
AV
M
TV
POWER
VOL
CH
MENU
SUORCE
SOURCE
TV/AV
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.
Adjusting the Volume
Press the VOL UP button to increase the
inderella
volume. Press the VOL DOWN button to
Mute
decrease the volume. The volume level
is displayed on the TV.
Press the MUTE button on the remote
control to turn the sound off. The word
M
TV
POWER
VOL
CH
MENU
SUORCE
“Mute” appears on the top left corner of
the screen and sound is temporarily
turned off.
Volume up
Volume down
Press the MUTE button on the remote
control or press the VOL UP button or
VOL DOWN button to restore the original volume.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting On-Screen Display (OSD)
Settings
11
The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust your TV’s settings. This chapter describes
how to change each of the available settings.
The OSD can be used with either the remote control or the front con-
trol panel.
Button Description
Control Panel
MENU
CH UP
MENU
CH S
CH T
MENU
CH DOWN
ENTER
The following sections explain how to adjust settings in the OSD
menus with the control panel.
OSD Setting Menus
Main Menu
ETC
M
Brightness
MENU
CH
30
Press the MENU button to enter
The Main Menu appears.
OSD Main Menu screen.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
1. Press MENU to enter the OSD
Main Menu
menus.
ETC
2. Press the CH DOWN button or CH UP
Brightness
button to select Brightness.
3. Press MENU. The brightness slide
bar is highlighted.
30
4. Press the CH UP button to increase
the brightness.
60
5. Press the CH DOWN button to
0
decrease the brightness.
6. Press MENU to confirm the setting
and return to the Main menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
BRIGHTNESS
60
30
0
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
1. Press MENU to enter the OSD
Main Menu
menus.
ETC
2. Press the CH DOWN button or CH UP
Contrast
button to select Contrast.
3. Press MENU. The contrast slide bar
is highlighted.
30
4. Press the CH UP button to increase
the contrast.
60
5. Press the CH DOWN button to
0
decrease the contrast.
6. Press MENU to confirm the setting
and return to the Main menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
CONTRAST
60
30
0
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Hue
1. Press the CH DOWN button or CH UP
Video Setting
button to select Hue.
G
B
R
2. Press MENU to enter the Hue sub-
Hue
menu.
G
R
3. Press the CH UP button to increase
G
G
R
R
green and decrease red.
4. Press the CH DOWN button to
decrease green and increase red.
5. Press MENU to confirm the setting
and return to the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturation
1. Press the CH DOWN button or CH UP
Video Setting
button to select Saturation.
G
B
R
2. Press MENU to enter the Saturation
Saturation
submenu.
127
3. Press the CH UP button to increase
255
the saturation.
4. Press the CH DOWN button to
0
decrease the saturation.
5. Press MENU to confirm the setting
and return to the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
SATURATION
255
127
0
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
1. Press the CH DOWN button or CH UP
Video Setting
button to select Sharpness.
G
B
R
2. Press MENU to enter the SHARP-
Sharpness
NESS submenu.
3. Press the CH UP button to increase
the sharpness.
4. Press the CH DOWN button to
decrease the sharpness.
5. Press MENU to confirm the setting
and return to the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature
1. Press the CH DOWN button or CH UP
button to select Color Temp.
Video Setting
2. Press MENU to enter the Color Tem-
perature submenu. There are three
default color temperatures to choose
from.
G
R
B
Color Temp.
Standard Color
Color Temp.
Standard
Press the CH DOWN button or CH UP
button to select Standard, then press
MENU.
Warm Color
Color Temp.
Warm
Press the CH DOWN button or CH UP
button to select Warm, then press
MENU.
Cold Color
Color Temp.
Press the CH DOWN button or CH UP
button to select Cold, then press
MENU.
Cold
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Treble
1. Press the CH DOWN button or CH UP
Audio Setting
button to select Treble.
TRE BASS
2. Press MENU to enter the treble sub-
Treble
menu.
3. Press the CH UP button to increase
the treble.
4. Press the CH DOWN button to
decrease the treble.
5. Press MENU to confirm the setting
and return to the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Bass
1. Press the CH DOWN button or CH UP
Audio Setting
button to select Bass.
TRE BASS
2. Press MENU to enter the Bass sub-
Bass
menu.
3. Press the CH UP button to increase
the bass.
4. Press the CH DOWN button to
decrease the bass.
5. Press MENU to confirm the setting
and return to the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
1. Press the CH DOWN button or CH UP
Audio Setting
button to select Balance.
TRE BASS
2. Press MENU to enter the Balance
Balance
submenu.
R
L
3. Press the CH DOWN button to shift
L
L
R
R
the balance to the left speaker.
4. Press the CH UP button to shift the
balance to the right speaker.
5. Press MENU to confirm the setting
and return to the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute
1. Press the CH DOWN button or CH UP
Audio Setting
button to select Mute.
TRE BASS
2. Press MENU to enter the Mute sub-
Mute
Off
menu.
On
3. Press the CH UP button to turn the
Audio Setting
mute off.
TRE BASS
4. Press the CH DOWN button to turn
Mute
Off
the mute on.
5. Press MENU to confirm the setting
On
and return to the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setting
Main Menu
TV Setting
M
ETC
MENU
CH
Press the MENU button enter
1. Press the CH DOWN button or
CH UP button to select TV
Setting.
OSD Main Menu screen.
2. Press MENU to enter the TV
Setting menu.
Note
The setting menu is available when current select source is TV.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/CATV
1. Press the CH DOWN button or CH UP
TV Setting
button to select TV/CATV.
+
CH
A
M
-
2. Press MENU to enter the TV/CATV
TV/CATV
submenu.
TV
CATV(STD HRC IRC)
Receiving Cable TV
Press the CH UP button to select CATV,
TV Setting
+
CH
A
M
then press MENU.
-
TV/CATV
TV
CATV(STD HRC IRC)
Receiving Broadcast TV
Press the CH DOWN button to select
TV Setting
+
CH
A
M
TV, then press MENU.
-
TV/CATV
TV
CATV(STD HRC IRC)
Note
The default TV setting is “CATV”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS
1. Press the CH DOWN button or CH UP
TV Setting
+
button to select MTS.
CH
A
M
-
2. Press MENU to enter the MTS sub-
menu. Select from the following
options.
MTS
MAIN
SAP
DUAL
MAIN
TV Setting
+
Press the CH DOWN button or CH UP
CH
A
M
button to select MAIN. A green dot
appears and MAIN is highlighted in yel-
low. Press MENU again to confirm the
selection.
-
MTS
MAIN
SAP
DUAL
SAP
TV Setting
+
Press the CH DOWN button or CH UP
CH
A
M
button to select SAP. Press MENU again
to confirm the selection. If a green dot
does not appear, then your service pro-
vider doesn’t support SAP.
-
MTS
MAIN
SAP
DUAL
DUAL
TV Setting
+
Press the CH DOWN button or CH UP
CH
A
M
button to select DUAL. Press MENU
again to confirm the selection. One
speaker plays the main audio signal and
the other speaker plays the alternate
audio signal.
-
MTS
MAIN
SAP
DUAL
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Program
1. Press the CH DOWN button or CH UP
TV Setting
button to select Auto Program.
+
CH
A
M
-
2. Press MENU to enter the Auto Pro-
Auto Program
ON
gram Setting submenu.
OFF
3. Press the CH DOWN button or CH UP
button to select ON or OFF and press
MENU.
TV Setting
+
CH
A
M
-
Auto Program
ON
OFF
The screen shows “Auto Program...” and
the channel indicator increments from 2
to 69 (ANT connection) or from 1 to 125
(CATV cable connection).
Auto Program...
CH. 12
The screen displays the first channel
that is successfully found after scanning
is complete.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Program
1. Press the CH DOWN button or CH UP
TV Setting
+
button to select “Manual Program”.
CH
A
M
-
2. Press MENU to enter the Manual Pro-
Manual Program
DOWN
gram submenu.
UP
CH. 4
3. Press the CH DOWN button and the
CH DOWN button to find the channel
you want to add. Press MENU to
select the channel
TV Setting
+
CH
A
M
-
Manual Program
DOWN
UP
4. Press MENU to exit, and then access
Channel Add/Erase function to add
a desired channel.
CH. 10
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Add/Erase
1. Select the channel you want to add or
TV Setting
delete, for example, Channel 28.
+
CH
A
M
-
2. Press the CH DOWN button or CH UP
button to select
CH. Add/Erase
Add
CH. Add/Erase.
Erase
3. Press MENU to enter the Channel
Add/Erase submenu. Select from the
following options.
CH. 7
Add Channel
1. Press the CH DOWN button or CH UP
button to select Add.
2. Press MENU to add the selected
channel.
Erase Channel
1. Press the CH DOWN button or CH UP
button to select Erase.
2. Press MENU to selected channel.
When you return to the normal TV
screen and use the CH DOWN but-
ton and CH UP buttons to browse
channels, the deleted channel (for
example, Channel 28) will be skipped
automatically
Note
You can still access the deleted channel by
entering the channel number using the
number buttons on the remote control.
Add the channel again if it was erased acci-
dentally.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Channels
1. Press the CH DOWN button or CH
UP button to select Favorites CH.
Edit.
TV Setting
+
CH
A
M
-
Favorites CH. Edit
2. Press MENU to enter the Favorites
M1
10
M2
10
M3
10
M4
10
CH. Edit submenu.
Exit
3. The screen displays the four favorite
TV Setting
+
channels: M1, M2, M3, and M4.
CH
A
M
-
Favorites CH. Edit
M1
18
M2
10
M3
10
M4
10
Exit
4. Press the CH DOWN button and the
CH UP button to select the channel
number you want to set for M1.
Press MENU to confirm the setting
and move to the next favorite chan-
nel, M2.
TV Setting
+
CH
A
M
-
Favorites CH. Edit
M1
10
M2
61
M3
10
M4
10
Exit
5. Repeat step 4 for M2, M3, and M4.
Note
Access your favorite channels in TV
mode by pressing the CH DOWN and CH
UP buttons to switch between M1, M2,
M3, and M4. This function is only avail-
able on the TV source. TV.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous Setting
Main Menu
M
ETC
MENU
CH
Miscellaneous
Press the MENU button to enter
1. Press the CH DOWN button or
CH UP button to select Mis-
cellaneous Setting.
OSD Main Menu screen.
2. Press MENU to enter the Mis-
cellaneous Setting menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
1. Press the CH DOWN button or CH UP
Miscellaneous
button to select Language.
CH
2. Press MENU to enter the Language
submenu.
Language
English
3. The screen displays the available
OSD languages: English and
T-Chinese
T-Chinese (Traditional Chinese).
4. Press the CH DOWN button and the
CH UP button to select a language.
The OSD language changes as soon
as you select a language.
ጵ!!!!!!!
ٽ CH
ߢ ᙇᖗ
5. Press MENU to confirm your choice.
᧯խ֮
Note
The default language setting is Traditional
Chinese.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
The sleep timer turns the TV off automatically after a set period of
time.
1. Press the CH DOWN button or CH UP
Miscellaneous
button to select Sleeper.
CH
2. Press MENU to enter the Sleeper
submenu.
Sleeper
3. The screen displays the available
sleep timer setting: Off, 30, 60, 90,
and 120 minutes.
off 30 60 90 120
4. Press the CH DOWN button and the
CH UP button to select a value.
Miscellaneous
CH
5. Press MENU to confirm your choice.
Sleeper
off 30 60 90 120
50
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Display
This setting allows you to set the amount of information that appears
on the LCD screen when the DISPLAY button is pressed. You can
choose from three settings: Off, Portion, or All.
1. Press the CH DOWN button or CH UP
Miscellaneous
button to select OSD Display.
CH
2. Press MENU to enter the OSD Dis-
play submenu.
OSD Display
Portion
3. The screen displays the available
sleep timer settings: All, Portion, or
Off.
All
Off
4. Press the CH DOWN button and the
CH UP button to select “All”, “Por-
tion”, or “Off”.
5. Press MENU to confirm your choice.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Setting
This section shows you how to change your TV’s clock setting.
1. Press the CH DOWN button or CH UP
Miscellaneous
button to select Time Setting.
CH
2. Press MENU to enter the Time Setting
submenu.
Time Setting
22
:
01
3. The screen displays the current set-
Miscellaneous
ting. The hour is highlighted in yellow.
CH
4. Press the CH DOWN button and the
CH UP button to adjust the hour set-
ting, then press MENU.
Time Setting
18
:
01
5. The minutes are highlighted in yellow.
Press the CH DOWN button and the
CH UP button to adjust the minute
setting.
Miscellaneous
CH
Time Setting
6. Press MENU to confirm the new time
18
:
35
setting.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset
The Reset function returns all of your TV’s user settings to their fac-
tory defaults.
Warning:
The reset function erases all of your custom and favorite channel set-
tings, and will reset all display settings (such as contrast, brightness,
etc.) to the factory default values. The reset function cannot be
reversed once it begins.
1. Press the CH DOWN button or CH UP
Miscellaneous
button to select Reset.
CH
2. Press MENU to enter the Reset sub-
menu.
Reset
3. Press the CH DOWN button and the
CH UP button to select “Yes” or “No”.
By default, “No” is already selected
(highlighted in yellow).
Yes
No
4. Press MENU to confirm your choice.
Exit
Exit turns off the OSD menus and returns you to TV mode.
1. Press the CH DOWN button or CH UP
Main Menu
button to select Exit.
ETC
2. Press MENU to exit the OSD menus.
Exit
53
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Taking Care of Your TV
Turn the power off before you begin cleaning the
TV.
Use a clean lens cloth to remove dust and finger-
prints from the screen.
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid the
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
GAS
OIL
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.
Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Press the POWER button on the control panel or
remote control.
•
•
•
•
Press the SOURCE button to cycle through con-
nected video sources.
Press CH UP or CH DOWN to switch to other TV
stations.
Check the TV/CATV OSD settings. See “TV/CATV”
Make sure all cables are connected properly.
No picture and sound.
•
•
Check the ANT and cable connections.
Adjust the brightness in the OSD menus. See
No picture, or poor picture,
sound is OK.
•
Adjust the saturation in the OSD menus. See “Satu-
Picture is not in color.
•
•
Press the VOL UP button on the control panel or
remote control.
Make sure the MTS option is set to Main or Dual.
Picture is OK, no sound.
One of the speakers has no
sound.
•
•
•
•
Adjust the balance in the OSD menus. See “Bal-
Can’t receive some TV chan-
nels using cable TV.
Try the Auto Program function in the OSD “TV Set-
ting” menu. See “Auto Program” on page 44.
Use the Reset function in the OSD “Miscellaneous”
menu. See “Reset” on page 53.
Want to reset TV settings.
Cannot operate menus.
No image but have sound.
If OSD items are colored light blue, the system is in
a state such that those settings are not available.
For example, video setting is available in TV mode.
•
Make sure the video signal cable is connected
properly.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Make sure the source device is functioning properly.
Set the volume to a higher level.
Make sure the audio cable is connected securely.
Turn the mute off.
No sound but have image.
Screen image turns over.
Snow appears on the screen.
•
Make sure the video signal cable is connected
properly.
•
•
Adjust the location of the ANT, placing it far from
roads or sources of interference.
Check the ANT and the video signal line connec-
tions.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the ANT or change the video
signal cable.
Blurred or overlapped images.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Specifications
Item
Specifications
DT12-10A1
9.6-inch TFT
4:3
LCD Panel Size
Aspect Ratio
Best Resolution
Maximum Display Area
TV System
800 (horizontal) x 600(vertical)
194.4 mm (H) x 145.8 mm (W)
NTSC
AV1: CVBS RCA jack
AV2: S-Video or CVBS: 10-pin mini-DIN
Video System
Audio System
(Input) AV1: RCA left & right jacks
(Input) AV2: RCA left & right jack on 10-pin mini-DIN
(Output) 3.5mm ø headphone jack
Built-in Speakers
3W + 3W
Power Supply
100~240 V,AC, 50/60 Hz adapter, 12V DC
40W (Average).
Power Consumption
Power Consumption (Standby)
Optional Accessories
Weight (including base)
Dimensions (including base)
5W max. (at 110Vac/60Hz)
External Speakers
3.12 kg
339mm (H) x 477 mm (W) x 112.6 mm (D)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Glossary
Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic
waves to distribute television channels to viewers (standard TV broadcast).
CATV Community Antenna Television, the original name for cable TV. A television
distribution system that uses coaxial cable instead of the traditional radio broad-
casting (over-the-air) method to deliver television, FM radio, and other services to
consumers.
Color Temperature Adjusting the color temperature enables you to set the inten-
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-
peratures result in a blue tint. Lower temperatures result in a red tint.
Hue Colors in a color system are measured by hue, saturation and luminance.
Hue indicates the predominant color.
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules
(liquid crystals) that flow like liquid and bend light.
MTS Multi-channel Television Sound. Enables reception of audio other than the
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.
RCA connector An RCA or phono connector is a plug and socket for a two-wire
(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of A/V equipment.
RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.
SAP Used with SAP and NTSC, enables broadcast of the main broadcast signal on
one speaker, and the alternate audio speaker on the other speaker.
Saturation Chromatic purity indicating the amount of white contained in a color.
Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.
S-Video Super-video, a video cabling standard used to transmit video by keeping
brightness (Y) and color information (C) on separate channels. Most often used with
camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.
VCD A compact disk format developed in 1993 by Sony and Philips to capture full-
motion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
|