MODEL T10538
12-PIECE GLASS/
GRANITE DRILLING SET
INSTRUCTIONS
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
Introduction
this set features 11 diamond bits that cut through
mirror, non-tempered glass, ceramics, porcelain,
limestone, marble, and granite.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
these bits can be used with a handheld drill or
drill press. however, we recommend using a drill
press whenever possible for greater control and
precision (see figure 1).
Do not use diamond bits to drill through
tempered glass, as the glass will shatter.
Drilling Speeds
use the chart below to select the appropriate drill-
ing speed (rpM) for the bit.
bit Size
RPM
2000
2000
2000
2000
2000
1500
1500
1500
1000
800
figure 1. example of diamond bit drilling hole in
glass.
3⁄16
1
⁄4"
5⁄16"
Inventory
Description
Qty
3
⁄
⁄
8
"
"
A. drilling guide.............................................. 1
1
2
3
b. Bits ⁄16", 1⁄4", 5⁄16", 3⁄8", 1⁄2", 3⁄4", 7⁄8",
3
1
1
1", 1 ⁄8", 1 ⁄4", 13⁄8" ..................................1 ea.
⁄4"
7
⁄
8
"
1"
1
1 ⁄8
"
1
1 ⁄4
"
13⁄8
"
800
Copyright © april, 2012 By grizzly industrial, inC.
WARNING: NO PORTION Of ThIS MANUAL MAy bE REPRODUCED IN ANy ShAPE
OR fORM WIThOUT ThE WRITTEN APPROvAL Of GRIzzLy INDUSTRIAL, INC.
#Bl14979 printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|