DK-100
Stand Alone Digital Keypad
DK-100-S
DK-100
Features
Blue back light keypad, easy to recognize in the dark.
ANSI standard size, convenience for mortise installation
Allows up to 99 PIN codes
Specifications
Operating Voltage: 12~24 Vdc
Epoxy potting, water-proof design
Current Draw: Average 35mA, Peak 130mA @ 12Vdc
Input: request-to-exit, time out reed switch contact
Output: Dual relays, N.O. / N.C./ Com. Output (free voltage
contact)
Relays Electric Current: 2A@30Vdc, 0.4A @ 120Vac
Dual relays operate simultaneously:
Strike Time: 1~99 seconds
Dual relays operate simultaneously, able to control
locks and other access control system
Cutting spare delay time after door closes for
anti-tailgating
Strike mode: Access Timer or Latch
Memory Volume: 99 slots
LED display with audible indication
Operating Temperature: -20~+70C
Ambient Humidity: 5~95% relative humidity non-
condensing
EPROM: Non-volatile memory, System will retain all
programs and codes after breaks down power
Metal casting housing with special screws
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60
seconds while 30 codes of incorrectly Master Codes
enrolled or PIN codes attempted)None beeper signal
of keypad activations(.
Statement
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
The DK-100 is a dual relay digital code-operated for access
control keypad with up to 99 individual user PINs, user access
PINs ensure that all functions controlled to authorized
persons only. The door reed switch Input is used to time out
the timer when door is moved for anti-tailgating. It's designed
to mount on ANSI standard-single-gang electric wall box or on
the surface of an interior or exterior wall.
Logical memory can prevents unauthorized persons
from gaining PIN code entry by trial and error, The system will
shut down for 60 seconds while 30 codes of incorrectly Master
Codes enrolled or PIN codes attempted )None beeper signal
of keypad activations(. Metal die casting housing with vandal
resistant screws to seize every security measures of the unit.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DK-100 Ver. C Published on 2008.05.05
Download from Www.Somanuals.com. All Manuals Search And Download.
|