Specifications and Applications
Image Capturing Unit (Camera Head and Controller)
CCD chip
Number of pixels
Pixel size
Fujifilm Super CCD Area Type chip
3.2M pixels
10.75 x 10.75µm
Cooling
Two-stage thermoelectric module with air circulation
-30°C (when room is below 28°C)
Power focusing; remote and preset control
1/100 second to 30 hrs (2 hrs to 30 hrs to be set manually)
Four orders of magnitude
Cooling temperature
Focusing
Exposure time
Dynamic range
Gradation
16 bits (65,536)
Image size
12.6MB Max.; 49.2KB Min.
Maximum sample size
Binning
25 x 25cm (wide angle lens); 14 x 21cm (Fujinon VRF43LMD lens)
1 x 2, 2 x 4, 4 x 8, and 8 x 16 pixels
USB1.1
Interface
Super CCD
Software
The binning mode of the LAS-3000 allows researchers to select from four
binning settings to enhance both imaging sensitivity and image resolution.
Image capture
Image analysis
Dimensions and Weights
Camera head
Dark Box IV
Fujifilm Image Reader (Mac™ and Windows®)
Fujifilm Image Gauge (Mac™); Fujifilm MultiGauge (Windows®)
Remote Controlled
Sample is placed on a tray
180 (W) x 170 (H) x 250mm (D)
510 (W) x 730 (H) x 480mm (D)
3.4kg
Chemiluminescence
49.0kg
Analyzing Unit
Operating system
Set a tray
Windows® XP or Mac™ OS 9 & X
Applicable Reagents and/or Samples
Sample
Chemiluminescence
Fluorescence
CDP-Star®, ECL™, ECL Plus™, SuperSignal, ImmunoStar, CSPD®
EtBr (W/UV light), SYBR® Green I & II, SYPRO® Orange,
GFP, DY-458XL (blue LED)
Chemiluminescence Mode
Pro-Q™ Diamond, Cy™3, RFP, DY-520XL (green LED), Alexa Fluor 633,
Cy™5, DY-647 (red LED)
Fluorescence
Chemifluorescence
Remote controlled
focusing
Chemifluorescence
Digitization
*AttoPhos™
CBB-stained gel, Silver stained gel (Transilluminator)
NBT/BCIP-stained membrane. MW marker (Epi-illuminator)
Filter
blue LED
green LED
red LED
UV trans-
illuminator
Intelligent Dark Box IV
EPI-illuminator for fluorescence
EPI-illuminator for digitization
blue LED (470nm), green LED (520nm), red LED (630nm)
White-light source
Fluorescence
Chemifluorescence Mode
Exposure
Transilluminator - for digitization of
stained gels and autoradiographic films
Digitization
White LED
UV transilluminator**
UV-light source (312nm)
Five positions
White light
epi-illuminator
Filter turret
White trans-
illuminator
Printers
Pictrography 3500
Digitize Mode
Analysis
Lens
Lens
High-sensitivity lens (FUJINON VRF43LMD)
Wide-view lens
F-number
Focal length
Focus
0.85
F-number
Focal length
Focus
2.0
43mm
24mm
Science Imaging System
Remote power focusing
Bayonet
Manual
The image analysis process captures images in three modes:
chemiluminescence, fluorescence/chemifluorescence and digitization.
Mount
Mount
Adapter to Nikon F mount
*No license is granted for use of AttoPhos™ to detect nucleic acid on a nylon membrane.
**No license is granted for pre-labeling gel electrophoresis method with the UV transilluminator.
Fuji Photo Film Co., Ltd. 26-30, Nishiazabu 2-Chome, Minato-ku, Tokyo 106-8620, Japan, Tel: +81-3-3406-2201, Fax: +81-3-3406-2158
Fujifilm Medical Systems U.S.A., Inc. 419 West Avenue, Stamford, CT 06902, U.S.A., Tel: +1-203-324-2000 ext. 6112 (1-800-431-1850 ext. 6112 in the U.S.), Fax: +1-203-351-4713
Fuji Photo Film (Europe) GmbH, Heesenstr. 31, 40549 Düsseldorf, Germany, Tel: +49-211-5089-174, Fax: +49-211-5089-139 http://www.fujifilm.de E-mail: [email protected]
•
•
E-mail: [email protected]
•
•
E-mail: [email protected]
•
•
Specifications and system configuration subject to change for improvement without notice. All other product names mentioned herein are the trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|