Musical
™
Activity Walker
Product Number B0322
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” (LR6) alkaline batteries (not included).
Adult assembly is required for battery installation.
Tool required for battery installation: Phillips screwdriver (not included)
IMPORTANT! An adult should convert this toy from:
activity center to walker or walker to activity center.
Disc
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Application
Proper label application will help to
keep the labels looking their best.
2
• Wash your hands before applying
the labels.
• Make sure the areas where the
labels will be applied are clean and
dry. Wipe this product with a clean,
soft, dry cloth to remove any dust
or oils.
1
4
• For best results, do not attempt
to apply a label more than once.
• Apply the labels as shown in
the illustration.
3
Sounds and Music in Walker -
Upright Position
Center Ball
• Locate the power/volume
switch on back of the toy.
• Slide the switch to the
desired position: Off O ; on
with low volume ; or on
with high volume
.
When baby pushes the walker or spins the
center ball (in upright position only), lively
music plays!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Walker - Upright Position
WARNING
To prevent pinching or crushing, always lock the
product in its upright position or in its folded position.
Hint: The Musical Activity Walker is ready to use as an activity center in the
folded position. Follow the instructions below to convert the Musical Activity
Walker from an activity center - folded position to the walker - upright position.
2
1
Rear
Leg
Arrows
Base
Rear
Wheel
Handle
To lock in the
upright position:
• Position a rear leg over the arrow
on the base, near the rear wheel.
• Push the rear leg down and slide it
toward the rear wheel until you hear
a “click”.
• While holding one of the rear wheels,
lift the handle.
Hint: This may require some force.
• Pull up on the rear leg to be sure it
is secure.
• Repeat this procedure to attach the
other rear leg to the base.
IMPORTANT! To avoid pinching, be
sure your fingers are not near the
arrows on the base when locking
the rear legs into position.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Activity Center - Folded Position
Hint: Follow the instructions below to convert the Musical Activity Walker from
a walker to an activity center - folded position.
To lock in the
folded position:
1
Rear
Wheel
3
Handle
Press Arrow
• Position the Activity Walker so that
the side is facing you.
• To unlock the rear leg, press the
arrow near the rear wheel, as shown.
• While holding one of the rear wheels,
push the handle down toward the rear
wheels until it “snaps” into place.
IMPORTANT! Make sure this product
is locked into position by securely
“snapping” into place.
2
Rear
Leg
• While pressing the arrow, carefully
slide the rear leg slightly toward the
front wheel.
IMPORTANT! Be careful to move your
fingers from the arrow after you have
unlocked the leg to avoid pinching.
• Repeat this procedure to unlock the
rear leg on the other side of the toy.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
Wipe this toy with a clean cloth dampened with a mild soap and water solution.
(United States Only)
FCC Statement
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price® Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-567-7724, Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
B0322a-0920
Printed in Mexico
Download from Www.Somanuals.com. All Manuals Search And Download.
|