PD8 & PD8L
Conditioned Power Distribution Unit
PD8 & PD8L
Conditioned Power Distribution Unit
ON / OFF
CIRCUIT BREAKER
PROTECTION ON
EPD8R
CONDITIONED
POWER DISTRIBUTION
ETA SYSTEMS
A CREATIVE LIGHT AND SOUND COMPANY
PD8
ON / OFF
CIRCUIT BREAKER
PROTECTION ON
EPD8LR
LIGHTS
CONDITIONED
POWER DISTRIBUTION
HIGH
OFF
RACK ILLUMINATOR
CAUTION: Replacement lamp is a standard 120 volt, incandescent lamp.
ETA SYSTEMS
LOW
A CREATIVE LIGHT AND SOUND COMPANY
PD8L
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 1 –
ETAsys.com
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
PD8 & PD8L
Conditioned Power Distribution Unit
SPECIFICATIONS
Height:
13⁄4
”
Width:
19”
Depth:
8”
Weight:
7 lbs
Housing Quality:
Electrical:
Black Powder Coated Chassis
120V, 50/60Hz, Single Phase
15 Amps / unit
Maximum Amps:
Maximum Watts:
Spike/Surge Protection:
Surge Protection Alarm:
Response Time:
Max. Clamping Voltage:
Max. Spike Current:
Max. Surge Energy:
Noise Filter (EMI/RFI) Frequency:
Attenuation:
1800 Watts / unit
Line to Neutral, Neutral to Ground, Line to Ground
Yes
< 1 Nanosecond
330V
65,000 Amps
1665 Joules Total (555 per leg)
150kHz -100MHz
Up to 68dB
Certification:
UL 1449 Listed
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 3 –
ETAsys.com
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
PD8 & PD8L
Conditioned Power Distribution Unit
LIMITED WARRANTY
All products manufactured by ETA Systems are warranted to the original dealer/installer, industrial or commercial purchaser to be
free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty
shall extend from the date of purchase for a period of one year. Additionally, fuses and lamps carry no warranty. ETA Systems will
solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied
and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by
improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water
immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered,
serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under
the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to ETA
Systems do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor
unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is
performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges
collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL
INJURY, ETA SYSTEMS SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL
LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS
IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
ETA Systems does not assume, nor does it authorize any other person to assume or extend on its behalf, any other warranty,
obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
SERVICE
Should your PD8 or PD8L require service, please contact the
ETA Systems warranty department at
1-877-689-8055, ext. 277 to obtain an RA number.
ETA Systems Tech Support can be reached at 1-800-321-6699.
©2009 ETA Systems All rights reserved. ETA003574 RevA 05/09
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 4 –
ETAsys.com
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|