Mini Memory Card
Reader/Writer
DX-CRMN1
USER GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
3
Features
Your card reader features:
•
•
A small form factor
USB-powered operation (an external power adapter is not
needed)
•
•
Compliance with the USB (Universal Serial Bus) 2.0
specification
Compliance with the USB mass storage device class
specification
Hot-swappable, Plug & Play capability
Support for media card icons for easy drive recognition
•
•
Important safety instructions
Before getting started, read these instructions and save them for
later reference.
•
Before you plug your card reader into your computer, read
this user guide. In some operating systems, the driver must
be installed before you install your card reader.
Do not drop or hit your card reader.
•
•
Do not install your card reader in a location that is subject
to strong vibrations.
•
Do not disassemble or try to modify your card reader.
Disassembly or modification may void your warranty and
could damage your card reader leading to a fire or electric
shock.
Do not store your card reader in a damp location. Do not
allow moisture or liquids to drip into your card reader.
Liquids can damage your card reader leading to a fire or
electric shock.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Card reader components
4
•
•
Do not insert metal objects, such as coins or paper clips,
into your card reader.
Do not remove a card when the LED indicator shows data
activity is in progress. You may damage the card or lose
data stored on the card.
Your card reader is for general computer use. Do not use
your card reader in a computer that requires exceptional
reliability, especially if a breakdown or malfunction of your
card read might jeopardize life or health, such as aerospace
equipment, atomic power control systems, traffic-related
equipment, transportation equipment, industrial robotics,
combustion equipment, safety devices, and life-support
systems.
•
Card reader components
Package contents
Make sure that you received:
•
•
•
•
Mini memory card reader (1)
Mini-USB 5-pin cable (1)
Utility and Documentation CD (1)
Quick Setup Guide (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the card reader
5
Minimum system requirements
•
•
•
•
•
Computer with one available external USB port
Pentium 133 MHz or higher processor
CD drive
2 MB of hard drive space
Windows® 2000, Windows® XP, Windows® Vista™,
Windows 7®, or Mac OS 10.x or higher.
Connecting the card reader
To connect your card reader, plug the small end of the included USB
cable into your card reader and the other end into an available
external USB port.
If your computer uses Windows 2000, Windows XP, Windows Vista,
Windows 7, or Mac OS 10.x, your computer automatically installs
the correct driver, and two new drive icons appear in the
My Computer and Windows Explorer windows (Windows operating
systems). If you want to customize the card reader drive icons, see
“Customizing drive icons (Windows 2000, Windows XP, Windows
Vista, and Windows 7 only)” on page 9.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
6
Using your card reader
To access a media card using Windows:
1
Insert a card into the appropriate slot, as shown in “Card
slots and LED” on page 7.
Caution: Cards must be inserted into the correct slot and in
the correct direction; otherwise, you may damage the card or
the slot.
2
3
Open the My Computer or Windows Explorer window, then
double-click the drive icon for the slot you are using.
To access files and folders on the inserted card, use normal
Windows procedures for opening, copying, pasting, or
deleting files and folders.
4
When you have finished working with the files on a
memory card, right-click the memory card icon and click
Eject. The light on the memory card reader turns off after
the card is removed.
Caution: Do not insert or remove memory cards while the
light on the reader is flashing. Doing so may cause damage to
your card or loss of data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
7
To access a media card using Macintosh:
1
Insert a card into the appropriate slot, as shown in “Card
slots and LED” on page 7. A new disk icon will appear on
the desktop.
Caution: Cards must be inserted into the correct slot and in
the correct direction; otherwise, you may damage the card or
the slot.
2
When you have finished working with the files on a
memory card, drag the disk icon to Trash or click the disk
icon and select Put Away from the File menu.
Caution: Do not insert or remove memory cards while the
light on the reader is flashing. Doing so may cause damage to
your card or loss of data.
Card slots and LED
Feature
Description
LED
Indicates when the reader is reading
from or writing to a card.
LED off—Your card reader is not
being used.
Power LED on (green)—Your card
reader is turned on.
Data LED on (green)—A card is
inserted in the slot.
LED flashing—Data is being
transferred to or from a memory card
and the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
8
Feature
Description
SD/SDHC/mini SD/MMC/RS-MMC slot Insert Secure Digital High Capacity
(SDHC), Secure Digital (SD), Mini SD,
Multi Media (MMC), or RS-MMC cards
into this slot.
microSD/T-Flash/M2 slot
Insert microSD, Transflash (T-Flash),
or Memory Stick micro (M2 )cards into
this slot. No adapter is required.
Note: The microSD or M2 card’s gold
contact area must be facing up and the
card must be inserted in the smaller
slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
9
Customizing drive icons (Windows 2000,
Windows XP, Windows Vista, and Windows 7
only)
To make the media card slots easier to recognize, you can
customize the drive icons.
1
2
Save all files and close all programs.
Insert the included Utility CD into your CD drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
10
3
The Dynex mini card reader window opens. Click Next,
then follow the on-screen instructions to install the driver.
4
After the driver installation is complete, restart your
computer. Windows displays new drive icons for each of the
slots instead of the standard Windows drive icons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
11
5
When Windows detects a card in a slot, the corresponding
drive icon turns from grey to a color, indicating that the
card is recognized.
Uninstalling software
To uninstall software in Windows Vista or Windows 7:
1
2
3
4
Click Start, then click Control Panel.
Click Uninstall a Program.
Locate the software in the list, then click Uninstall.
Follow the on-screen instructions to uninstall the software.
To uninstall software in Windows XP or Windows 2000:
1
2
3
4
Click Start, then click Control Panel.
Click Add or Remove Programs.
Locate the software in the list, then click Remove.
Follow the on-screen instructions to uninstall the software.
Formatting a memory card (Windows 2000,
Windows XP, Windows Vista, and Windows 7)
If your computer has trouble recognizing a new memory card,
format the memory card in your camera or by using the computer.
To format a memory card:
1
2
Click Start, and then click My Computer.
Under Removable Storage, right-click the appropriate
memory card icon.
3
4
Select Format.
Type in a name into the Volume Label box. The name of
your memory card appears next to the icon.
5
Click Start, then click OK in the Warning dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your card reader
12
6
7
Click OK on the Format Complete window.
Click Close to finish.
Caution: Formatting a memory card will permanently delete
all files on the card. Be sure that you copy any valued files to a
computer before formatting a memory card. Do not disconnect
the card reader or remove the memory card while formatting is
in progress.
Formatting a memory card (Macintosh)
If your computer has trouble recognizing a new memory card,
format the memory card in your camera or by using the computer.
To format a memory card:
1
2
3
Click Go, then click Utilities.
Launch Disk Utility.
In the left-hand column, select the memory card you want
to format, then click the Erase tab.
4
5
Specify a volume format and name for the memory card,
then click Erase. A warning box opens.
Click Erase again. The Erase process takes a minute or so to
erase and reformat your memory card.
Caution: Formatting a memory card will permanently delete
all files on the card. Be sure that you copy any valued files to a
computer before formatting a memory card. Do not disconnect
the card reader or remove the memory card while formatting is
in progress.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
13
Troubleshooting
If memory cards do not appear in My Computer or Windows
Explorer (Windows operating systems) or on the desktop (Mac
operating systems), check the following:
•
Make sure the card reader is fully connected to your card
reader. Unplug and reconnect your card reader.
Try a different memory card of the same type in the same
slot. If a different memory card works, the original memory
card should be replaced.
Disconnect the cable from your card reader and shine a
flashlight into the empty card slots. Look to see if any pin
inside is bent, and straighten bent pins with the tip of a
mechanical pencil. Replace your memory card reader if a
pin has bent so much that it touches another pin.
•
•
If memory cards appear in My Computer (Windows operating
systems) or on the desktop (Mac operating systems) but errors
occur when writing or reading, check the following:
•
Make sure that the memory card is fully inserted into the
slot.
Try a different memory card of the same type in the same
slot. If the different memory card works, the original
memory card should be replaced.
•
•
•
•
Some cards have a read/write security switch. Make sure
that the security switch is set to Write Enabled.
Make sure that the amount of data you attempted to store
has not exceeded the capacity of the card.
Inspect the ends of the memory cards for dirt or material
closing a hole. Clean the contacts with a lint-free cloth and
small amounts of isopropyl alcohol.
•
If errors persist, replace the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
14
If no icon appears when a card is inserted into the reader
(MAC OS X), check the following:
•
The card may have been formatted in Windows FAT 32
format. Using a PC or digital device, reformat the card using
OS X-compatible FAT or FAT16 format.
If you get an error message when installing the card reader
software, check the following:
•
•
Make sure that your card reader is connected to your
computer.
Make sure that only one card reader is connected to your
computer. If other card readers are connected, unplug them
before installing the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
15
Specifications
Chipset
ITE
Supported file formats
Two memory slots
FAT 12/16/32, NTFS
Top slot: SD/SDHC/mini SD/MMC/RS-MMC
Bottom slot: microSD/T-Flash/M2
Indicators
Power / USB link, Card detect and data activity
Supported cards
Secure Digital, Secure Digital High Capacity, mini
SD, Multi Media, RS MMC card microSD, and M2
USB Transfer Speed
USB Cable
Up to 480 Mbps
USB A-type plug to mini-USB plug
OS Support
Windows 2000, Windows XP, Windows Vista,
Windows 7, Mac OS 10.x or higher
Dimensions (L × D× H)
Operating temperature
Storage temperature
Certification
2.24 × 1.0 × 0.53 inches (57 × 26 × 13.42 mm)
32 F~104 F (0 C~40 C)
-4 F~140 F (-20 C~60 C)
FCC Class B, ICES-003, RoHS compliant
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
16
Legal notices
FCC statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
17
One-year limited warranty
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new
DX-CRMN1 (“Product”), that the Product shall be free of defects in the original
manufacture of the material or workmanship for a period of one (1) year from the
date of your purchase of the Product (“Warranty Period”). This Product must be
purchased from an authorized dealer of Dynex brand Products and packaged with
this warranty statement. This warranty does not cover refurbished product. If you
notify Dynex during the Warranty Period of a defect covered by this warranty that
requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days) from the date you purchased the
Product. The purchase date is printed on the receipt you received with the
Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an authorized
Dynex repair center or store personnel, Dynex will (at its sole option): (1) repair
the Product with new or rebuilt parts; or (2) replace the Product at no charge with
new or rebuilt comparable products or parts. Products and parts replaced under
this warranty become the property of Dynex and are not returned to you. If service
of products and parts are required after the Warranty Period expires, you must pay
all labor and parts charges. This warranty lasts as long as you own your Dynex
Product during the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt
and the Product to the store you purchased it from. Make sure that you place the
Product in its original packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the Product from an online
web site, mail your original receipt and the Product to the address listed on the
web site. Make sure that you put the Product in its original packaging or
packaging that provides the same amount of protection as the original packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
18
To obtain in-home warranty service for a television with a screen 25 inches or
larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over
the phone or will have an Dynex-approved repair person dispatched to your
home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United
States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product
Plasma display panel damaged by static (non-moving) images applied
for lengthy periods (burn-in).
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility authorized by Dynex to
service the Product
•
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been altered or
removed
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal notices
19
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Dynex:
For customer service please call 1-800-305-2204
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc.
Registered in some countries. All other products and brand names are trademarks
of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved.
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in
some countries. All other products and brand names are trademarks of their
respective owners.
09-0472
ENGLISH
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|