Dukane Projector 8412 User Manual

USER MANUAL MODEL 8412

DATA VIDEO PROJECTOR

Information in this Guide may change due to product improvements. To obtain the latest

manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av

and look at the specific model SUPPORT or DOWNLOADS section.

DUKANE CORP AV SERVICE DEPT

2900 Dukane Drive

St Charles, IL 60174

800-676-2487 / 630-762-4032

Fax 630-584-5156

[email protected]

www.dukane.com/av

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

SETUP | Advanced............................41

SETUP | Network...............................42

OPTIONS...........................................47

OPTIONS | Advanced........................48

OPTIONS | Lamp Settings.................49

Appendices....................................50

Troubleshooting ................................50

Replacing the lamp...........................55

Compatibility Modes .........................57

Computer Compatibility .....................57

Video Compatibility............................58

Table of Contents ............................1

Usage Notice...................................2

Safety Information...............................2

Precautions.........................................3

Eye Safety Warnings ..........................5

Product Features ................................5

Introduction......................................6

Package Overview..............................6

Product Overview ...............................7

Main Unit..............................................7

Control Panel.......................................8

Input/Output Connections....................9

Remote Control..................................10

Installation .....................................11

Connecting the Projector ..................11

Connect to Computer/Notebook ........ 11

Connect to Video Sources.................12

Powering the projector On / Off ........13

Powering On the Projector.................13

Powering Off the Projector.................14

Warning Indicator...............................14

Adjusting the Projected Image..........15

Adjusting the Projector’s Height ........15

Adjusting the Projector’s Focus.........16

Adjusting Projection Image Size........16

User Controls ................................18

Control Panel & Remote Control ......18

Control Panel.....................................18

Remote Control..................................19

On-screen Display Menus ................24

How to operate .................................24

Menu Tree..........................................25

IMAGE ...............................................27

IMAGE | Advanced ............................29

DISPLAY............................................31

DISPLAY | 3D ...................................34

SETUP...............................................35

SETUP | Signal (RGB).......................38

SETUP | Security...............................39

RS232 Commands and Protocol

Function List .....................................59

RS232 Pin Assignments....................59

RS232 Protocol Function List ............60

Ceiling Mount Installation..................64

Regulation & Safety Notices.............67

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Usage Notice

Safety Information

The lightning ﬂash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufﬁcient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector and to protect from over heating, it is recommended to

install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coffee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air ﬂow.

2. Do not use the projector near water or moisture. To reduce the risk

of ﬁre and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus such as ampliﬁers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories speciﬁed by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

 Unit has been dropped.

 Power supply cord or plug has been damaged.

 Liquid has been spilled on to the projector.

 Projector has been exposed to rain or moisture.

 Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call Dukane

before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch

dangerous voltage points and short out parts that could result in ﬁre or

electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Usage Notice

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may hurt and damage your eyes.

▀■ Warning- To reduce the risk of ﬁre or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow the unit to

cool down. Follow instructions as described on pages

55-56.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Reset the “Lamp Reset” function from the on-screen

display “OPTIONS | Lamp Settings” menu after

replacing the lamp module (refer to page 49).

▀■ Warning- When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.



When the lamp

reaches the end

of its life, the pro-

jector will not turn

back on until the

lamp module has

been replaced.

To replace the

lamp, follow the

procedures listed

under “Replacing

the Lamp” section

on pages 55-56.

▀■ Warning- Do not use lens cap when projector is in operation.

▀■ Warning- When the lamp is approaching the end of its lifetime,

the message “Lamp Warning: Lamp life exceeded.”

will show on the screen. Please contact your local

reseller or service center to change the lamp as soon

as possible.

▀■ Warning- Do not look into or point the laser pointer on your

remote control into your or someone’s eyes. Laser

pointer can cause permanent damage to eyesight.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Usage Notice

Do:



Turn off and unplug the power plug from the AC outlet before

cleaning the product.

Use a soft dry cloth with mild detergent to clean the display

housing.

Disconnect the power plug from AC outlet if the product is

not being used for a long period of time.

Do not:



Block the slots and openings on the unit provided for

ventilation.



Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

- In extremely hot, cold or humid environments.

Ensure that the ambient room temperature is within

5 - 35°C.



Relative Humidity is 5 - 35°C, 80% (Max.),

non-condensing.



- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic ﬁeld.

- In direct sunlight.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Usage Notice

Eye Safety Warnings

▀■ Avoid staring/facing directly into the projector beam at all

times. Keep your back to the beam as much as possible.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power, use room blinds to

reduce ambient light levels.

Product Features

▀■ XGA (1024x768) Native resolution /

WXGA (1280x800) Native resolution

▀■ HD compatible – 1080p supported

▀■ VGA monitor loop through



Monitor loop

through only sup-

port in VGA1-In/

SCART/YPbPr.

(works on standby mode > 1W)

▀■ BrilliantColor^TMTechnology

▀■ Security Bar and Kensington Lock

▀■ RS232 control

▀■ Rapid shutdown

▀■ Built-in speakers

▀■ Network support

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Package Overview

Unpack and inspect the box contents to ensure

all parts listed below are in the box. If something

is missing, please contact your nearest customer

service center.

VGA Cable 1.8m

Projector with lens cap

Power Cord 1.8m



Due to different

applications in

each Country,

some regions

may have

IR Remote Control

2 × AAA Batteries

Documentation :

different

accessories.

User’s Manual



Warranty Card

Quick Start Card

WEEE Card

(for EMEA only)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Product Overview

Main Unit

Air Flow

1. Control Panel

2. Focus Ring

3. Speaker

4. Tilt-Adjustment Feet

5. Lens

7. Input / Output

Connections

8. Power Socket

9. Security Bar

10. Ventilation (inlet)

11. Ventilation (outlet)

6. IR Receiver

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Control Panel

LAMP

TEMP

HELP

POWER/STANDBY

1. Source

2. Enter

3. Re-Sync

4. IR Receiver

5. Temp LED

6. Help

7. Four Directional Select Keys

8. Power/Standby button and LED

9. Keystone Correction

10. Menu

11. Lamp LED

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Input/Output Connections

RJ-45

USB

HDMI

S-VIDEO

VIDEO

RS-232

AUDIO1-IN

(VGA1/VGA2)

VGA-OUT

VGA1-IN / SCART / YPbPr

12V OUT

MIC

AUDIO 2-IN (S-VIDEO/VIDEO)

VGA2-IN / YPbPr

AUDIO OUT

12V OUT

1. RJ-45 Networking Connector

2. USB Connector (Connect to PC for Remote Mouse func-

tion)

3. HDMI Connector

4. VGA-Out Connector (Monitor Loop-through Output)

5. VGA1-In/SCART/YPbPr Connector

(PC Analog Signal/Component Video Input/HDTV/YPbPr/

SCART)

6. S-Video Input Connector



Monitor loop

7. Composite Video Input Connector

8. RS-232 Connector (3-pin DIN Type)

9. Audio 1 Input connector (3.5mm mini jack)

(for VGA1/VGA2)

through only sup-

port in VGA1-In/

SCART/YPbPr.

10. 12V Trigger Relay Connector (12V, 750mA)

11. Security Bar

12. Audio Output Connector (3.5mm Mini Jack)

13. Kensington^TMLock Port

14. RCA Audio 2 Input connector (Left & Right)

(for S-Video/Video)

15. Microphone Input Connector

16. VGA2-In/YPbPr Connector

(PC Analog Signal/Component Video Input/HDTV/YPbPr)

17. Power Socket

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Remote Control

1. LED Indicator

2. Power On/Off

3. Four Directional

Select Keys

4. Mouse Right Click

5. Page Up

6. Re-Sync

7. Page Down

8. Volume +/-

9. 3D

10. AV mute

11. Video

12. PC/Mouse control

13. Mouse Left Click

14. Enter/Help

15. Source

16. Keystone +/-

17. Menu

18. Brightness

19. HDMI

20. S-Video

21. Numbered keypad

(for password input)

22. Freeze

23. VGA

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connecting the Projector

Connect to Computer/Notebook

+12V Output

MOLEX

x e l

RJ-45

USB

HDMI

S-VIDEO

VIDEO

RS-232

AUDIO1-IN

(VGA1/VGA2)

VGA-OUT

VGA1-IN

SCART / YPbPr

12V OUT

MIC

AUDIO 2-IN (S-VIDEO/VIDEO)

VGA2-IN / YPbPr

AUDIO OUT



Due to the

difference in

applications

for each

country, some

regions may

have different

accessories.



(*) Optional

accessory

Audio Output

1....................................................................................................Power Cord

2..............................................................................................*Network Cable

3....................................................................................................*USB Cable

4...........................................................................................*DVI/HDMI Cable

5.....................................................................................................VGA Cable

6................................................................................................*RS232 Cable

7.........................................................................................*Audio Input Cable

8........................................................................................*VGA Output Cable

9......................................................................................*Audio Output Cable

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connect to Video Sources

DVD Player, Set-top Box,

HDTV receiver

S-Video Output

Composite Video Output

+12V Output

RJ-45

USB

HDMI

S-VIDEO

VIDEO

RS-232

AUDIO1-IN

(VGA1/VGA2)

VGA-OUT

VGA1-IN

SCART / YPbPr

12V OUT

MIC

AUDIO 2-IN (S-VIDEO/VIDEO)

VGA2-IN / YPbPr

AUDIO OUT

Audio Output



Due to the

difference in

applications

for each

country, some

regions may

have different

accessories.

1....................................................................................................Power Cord

2..................................................................................................*HDMI Cable

3........................................................................................*Microphone Cable

4................................................................................... *SCART/VGA Adaptor

5.....................................................................................................VGA Cable

6.............................................................................................. *S-Video Cable

7................................................................................*Composite Video Cable

8.................................................................................*Audio Cable Jack/RCA

9................................................*15-Pin to 3 RCA Component/HDTV Adaptor

10...........................................................................*3 RCA Component Cable

11...............................................................................*Audio Cable RCA/RCA



(*) Optional

accessory

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Powering the projector On / Off

Powering On the Projector

1. Remove the lens cap. 

2. Securely connect the power cord and signal cable. When

connected, the POWER/STANDBY LED will turn Amber.

3. Turn on the lamp by pressing “ ” button either on the top of

the projector or on the remote. The POWER/STANDBY LED

will now turn Green. 

 When Power mode

(Standby) is set

to Eco (<1W), the

VGA output, Audio

pass-through

The startup screen will display in approximately 10 seconds.

The ﬁrst time you use the projector, you will be asked to

select the preferred language and power saving mode.

and RJ45 will be

deactivated when

the projector is in

standby.

4. Turn on and connect the source that you want to display

on the screen (computer, notebook, video player, etc). The

projector will detect the source automatically. If not, push

menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “Off”.

 If you connect multiple sources at the same time, press the

“SOURCE” button on the control panel or direct source keys

on the remote control to switch between inputs.

LAMP

TEMP

POWER/STANDBY

HELP

POWER/STANDBY



Turn on the

projector ﬁrst and

then select the

signal sources.

Lens Cap

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Powering Off the Projector

1. Press the “ ” button on the remote control or

on the control panel to turn off the projector.

The following message will be displayed on the screen.

Press the “ ” button again to conﬁrm otherwise the

message will disappear after 15 seconds. When you

press the “ ” button for the second time, the projector will

display countdown timer and will shut down.

2. The cooling fans continue to operate for about 10 seconds

for cooling cycle and the POWER/STANDBY LED will

Flash Green. When the POWER/STANDBY LED lights

solid Amber, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and

the projector.

4. Do not turn on the projector immediately following a power

off procedure.

Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:

Contact the

nearest service

center if the



 “LAMP” LED indicator is lit red and if “POWER/STANDBY”

indicator ﬂashes amber.

projector displays

these symptoms.

See pages

65-66 for more

information.

 “TEMP” LED indicator is lit red and if “POWER/STANDBY”

indicator ﬂashes amber. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.

 “TEMP” LED indicator ﬂashes red and if “POWER/STAND-

BY” indicator ﬂashes amber.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator feet for adjusting

the image height.

1. Locate the adjustable foot you wish to modify on the

underside of the projector.

2. Rotate the adjustable ring clockwise to raise the projector

or counter clockwise to lower it. Repeat with the remaining

feet as needed.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Adjusting the Projector’s Focus

To focus the image, rotate the focus ring until the image is clear.

XGA series: The projector will focus at distances from 1.64

to 12.46 feet (0.5 to 3.8 meters).



WXGA series: The projector will focus at distances from 1.64

to 11.15 feet (0.5 to 3.4 meters).



Focus Ring

Adjusting Projection Image Size

XGA series: Projection Image Size from 41.0” to 312.0” (1.0

to 7.9 meters).



WXGA series: Projection Image Size from 44.6” to 303.0”

(1.1 to 7.7 meters).

Top View

Screen

Screen (W)

Projection Distance (D)

Width

Screen (H)

Offset (Hd)

Screen

Side View

Projection Distance (D)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

XGA

Screen Size W x H

(m) (inch)

Width

Projection Distance (D)

Diagonal length

(inch) size of

4:3 Screen

Offset (Hd)

(m)

(feet)

Width

0.81

1.22

1.42

1.63

1.83

2.03

2.44

3.05

3.66

5.08

6.10

Height

0.61

0.91

1.07

1.22

1.37

1.52

1.83

2.29

2.74

3.81

4.57

Height

24.02

35.83

42.13

48.03

53.94

59.84

72.05

90.16

107.87

150.00

179.92

wide

0.50

0.80

0.90

1.00

1.10

1.30

1.50

1.90

2.30

3.20

3.66

tele

0.50

0.80

0.90

1.00

1.10

1.30

1.50

1.90

2.30

3.20

3.66

wide

1.64

2.62

2.95

3.28

3.61

4.26

4.92

6.23

7.54

10.50

12.01

tele

1.64

2.62

2.95

3.28

3.61

4.26

4.92

6.23

7.54

10.50

12.01

(m)

0.09

0.14

0.16

0.18

0.21

0.23

0.27

0.34

0.41

0.57

0.69

(feet)

40.00

60.00

31.89

48.03

55.91

64.17

72.05

79.92

96.06

120.08

144.09

200.00

240.16

0.30

0.45

0.53

0.60

0.67

0.75

0.90

1.13

1.35

1.87

2.25

70.00

80.00

90.00

100.00

120.00

150.00

180.00

250.00

300.00

 This table is for user’s reference only.

WXGA

Screen Size W x H

Diagonal length

Projection Distance (D)

(m) (feet)

Offset (Hd)

(m)

(inch)

(inch) size of

16:10 Screen

Width

0.86

1.29

1.51

1.72

1.94

2.15

2.58

3.23

3.88

5.38

6.46

Height

0.54

0.81

0.94

1.08

1.21

1.35

1.62

2.02

2.42

3.37

4.04

Width

Height

21.26

31.89

37.01

42.52

47.64

53.15

63.78

79.53

95.28

132.68

159.05

wide

0.40

0.70

0.80

0.90

1.00

1.10

1.30

1.70

2.00

2.80

3.36

tele

0.40

0.70

0.80

0.90

1.00

1.10

1.30

1.70

2.00

2.80

3.36

wide

1.31

2.30

2.62

2.95

3.28

3.61

4.26

5.58

6.56

9.18

11.03

tele

1.31

2.30

2.62

2.95

3.28

3.61

4.26

5.58

6.56

9.18

11.03

(m)

0.07

0.10

0.12

0.13

0.15

0.17

0.20

0.25

0.30

0.42

0.50

(feet)

40.00

60.00

33.86

50.79

0.22

0.33

0.38

0.44

0.49

0.55

0.66

0.82

0.98

1.37

1.64

70.00

59.45

80.00

67.72

90.00

76.38

100.00

120.00

150.00

180.00

250.00

300.00

84.65

101.57

127.17

152.76

211.81

254.33

 This table is for user’s reference only.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Control Panel & Remote Control

Control Panel

LAMP

TEMP

HELP

POWER/STANDBY

Using the Control Panel

Refer to the “Power On/Off the Projector” section on

pages 13-14.

POWER

Automatically synchronize the projector to the input

source.

RE-SYNC

Conﬁrm your item selection.

Enter

Press “SOURCE” to select an input signal.

SOURCE

Press “Menu” to launch the on-screen display

(OSD) menu. To exit OSD, Press “Menu” again.

Four Directional

Use

to select items or make adjust-

Select Keys

ments to your selection.

Use

to adjust image distortion caused

Keystone

by tilting the projector. (±40 degrees)

HELP

Help Menu (refer to page 21).

Lamp LED

Temp LED

Indicate the projector’s lamp status.

Indicate the projector’s temperature status.

POWER/

STANDBY

LED

Indicate the projector’s status.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Remote Control

Using the Remote Control

Refer to the “Power On/Off the Projector”

section on pages 13-14.

Power

Mouse left click.

L Button

R Button

Page +

Page -

Mouse right click.

Use this button to page up.

Use this button to page down.

Conﬁrm your item selection.

Enter

/ Help

Help Menu (refer to page 21).

Press “Source” to select an input signal.

Source

Automatically synchronizes the projector to

the input source.

Re-SYNC

Four Directional

Use

to select items or make

Select Keys

adjustments to your selection.

Adjust image distortion caused by tilting the

projector.

Keystone +/-

Adjust to increase / decrease the volume.

Adjust the brightness of the image.

Volume +/-

Brightness

Press the “3D” to turn the 3D OSD menu

on/off.

Press “Menu” to launch the on-screen

display (OSD) menu. To exit OSD, press

“Menu” again.

Press “HDMI” to choose HDMI source.

HDMI

Press “Freeze” to pause the screen image.

Press this button again to unlock.

Freeze

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Using the Remote Control

Momentarily turns off/on the audio and

video.

AV mute

S-Video

VGA

Press “S-Video” to choose S-Video source.

Press “VGA” to choose VGA sources.

Press “Video” to choose Composite video

source.

Video

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Using the HELP button

The HELP function ensures easy setup and operation.

Press the “?” button on the remote control or press the

“HELP” button on the control panel to open the Help Menu.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Help menu button functions only when no input source

is detected.





Please refer to the

“Troubleshooting”

section on pages

50-54 for more

details.

If input source is detected and help button is pressed, the

following pages will appear to help diagnose any problems.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

On-screen Display Menus

The Projector has multilingual On-screen Display menus that

allow you to make image adjustments and change a variety of

settings. The projector will automatically detect the source.

How to operate

1. To open the OSD menu, press “Menu” on the Remote Control or

Projector Keypad.

When OSD is displayed, use

keys to select any item in the

main menu. While making a selection on a particular page, press

or “Enter” key to enter sub menu.

3. Use

using

keys to select the desired item and adjust the settings

key.

4. Select the next item to be adjusted in the sub menu and adjust as

described above.

5. Press “Enter” to conﬁrm, and the screen will return to the main

menu.

6. To exit, press “MENU” again. The OSD menu will close and the

projector will automatically save the new settings.

Main Menu

Sub Menu

Settings

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Menu Tree

Main Menu

Sub Menu

Settings

Display Mode

Presentation / Bright / Movie / sRGB /

Blackboard / Classroom / User / 3D

Image

Brightness

Contrast

Sharpness

^#1Saturation

^#1Tint

Advanced

Degamma

BrilliantColor™

Film / Video / Graphics / PC

0~10

Color Temp.

Warm / Medium / Cold

Color

Red Gain / Green Gain / Blue Gain / Red

Bias / Green Bias / Blue Bias / Cyan /

Magenta / Yellow / Reset / Exit

Color Space

Input Source

Image AI

Exit

AUTO / RGB / YUV

VGA1 / VGA2 / Video / S-Video / HDMI

On / Off

Format

^#24:3 / 16:9-1 / 16:9-II / Native / AUTO

^#34:3 / 16:9 / 16:10 / LBX / Native / AUTO

Display

Overscan

Zoom

0~10

80%~200%

-50 ~ +50

-40 ~ +40

On / Off

Off / On

On / Off

H Image Shift

V Image Shift

V Keystone

Auto Keystone

^#43D Sync. Invert

Exit

Language

English / Deutsch / Français / Italiano /

Español / Português / Svenska /

Setup

Nederlands / Norsk/Dansk / Polski /

Suomi / Ɋɭɫɫɤɢɣ / İȜȜȘȞȚțȐ / Magyar /

ýeština / ̶γέΎϓ / ϲΑήϋ /᜗᧯խ֮ʳ/ 亞᫿խ֮ʳ/

፿!0ᾂ᝖᱑ʳ/

ࡎࡷ

࡙ꢀ/ Türkçe / ViӋt

^#3Screen Type

16:10 / 16:9

Projection

Menu Location

^#5Signal

Automatic

On / Off

Phase (VGA)

Frequency (VGA)

H. Position (VGA)

V. Position (VGA)

Exit

0~31

-5~5

Security

On / Off

Security Timer

Change Password

Exit

Month / Day / Hour

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Main Menu

Sub Menu

Settings

0~99

Projector ID

Mute

^#6Volume

Setup

On / Off

0~10

Audio Input

Default / Audio1(Phone jack) / Audio2

(RCA R/L) / MIC

Advanced

Logo

Optoma / User

Off / CC1 / CC2

RS232 / Network

Logo Capture

Closed Captioning

Exit

RS232

Network

Network State

DHCP

IP Address

Subnet mask

Gateway

DNS

Apply

Yes / No

Exit

Source Lock

On / Off

Options

High Altitude

Information Hide

Keypad Lock

Background Color

Advanced

On / Off

Black / Red / Blue / Green / White

Direct Power On

Auto Power Off (min.)

Sleep Timer (min.)

Power Mode (Standby)

Exit

On / Off

0~180

0~995

Eco. / Active

Lamp Settings

Lamp Hours

Lamp Reminder

Brightness Mode

Lamp Reset

On / Off

STD/Bright

Yes / No

Exit

Reset

 Please note that the on-screen display (OSD) menus vary according to the

signal type selected and the projector model you are using.

 (#1) “Saturation” and “Tint” are only supported in Video mode.

 (#2) For XGA model only.

 (#3) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.

 (#4) “3D Sync Invert” is only available when 3D is enabled.

 (#5) “Signal” is only supported in Analog VGA (RGB) signal.

 (#6) MIC volume can also be controlled by setup volume in OSD



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

IMAGE

Display Mode

There are many factory presets optimized for various types of

images.

Presentation: Good color and brightness from PC input.



Bright: Maximum brightness from PC input.



Moive: For home theater.



sRGB: Standardised accurate color.



Blackboard: This mode should be selected to achieve optimum

color settings when projecting onto a blackboard (green).



Classroom: This mode is recommended for projecting in a

classroom.



User: User’s settings.



3D: Recommand setting for 3D mode enabled. Any further ad-

justments by the user in 3D will be saved in this mode for further



use.

Brightness

Adjust the brightness of the image.

Press the to darken image.



Press the to lighten the image.

Contrast

The contrast controls the degree of difference between the lightest

and darkest parts of the picture.

Press the to decrease the contrast.



Press the to increase the contrast.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Sharpness

Adjust the sharpness of the image.

Press the to decrease the sharpness.

Press the to increase the sharpness.



Saturation

Adjust a video image from black and white to fully saturated color.

 “Saturation” and

“Tint” functions

Press the to decrease the amount of saturation in the image.



are only supported

under Video mode.

Press the to increase the amount of saturation in the image.

Tint

Adjust the color balance of red and green.

Press the to increase the amount of green in the image.



Press the to increase the amount of red in the image.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

IMAGE | Advanced

Degamma

This allows you to choose a degamma table that has been

ﬁne-tuned to bring out the best image quality for the input.

Film: for home theater.



Video: for video or TV source.



Graphics: for image source.



PC: for PC or computer source.



BrilliantColor™

This adjustable item utilizes a new color-processing algorithm and

system level enhancements to enable higher brightness while

providing true, more vibrant colors in picture. The range is from

“0” to “10”. If you prefer a stronger enhanced image, adjust toward

the maximum setting. For a smoother, more natural image, adjust

toward the minimum setting.

Color Temp

If set to cold temperature, the image looks more blue. (cold image)

If set to warm temperature, the image looks more red.

(warm image)

Color

Press

into the next menu as below and then use

select item.

Red/Green/Blue/Cyan/Magenta/Yellow: Use or to select

Red, Green, Blue, Cyan, Magenta and Yellow Colors.



Reset: Choose “Yes” to return the factory default settings for

color adjustments.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Color Space

Select an appropriate color matrix type from AUTO, RGB or YUV.

Input Source

Use this option to enable / disable input sources. Press

to enter

the sub menu and select which sources you require. Press “Enter”

to finalize the selection. The projector will not search for inputs that

are not selected.

Image AI

Image AI improves the contrast of the picture by optimizing the

brightness of the lamp according to the picture content.

On: The dynamic image performance manager is active in



making sure your greatest pleasure from seeing a movie

dynamically with the most dark details revealed, vivid and

bright image performed all the way.

Off: The dynamic image performance manager is on standby.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

DISPLAY

Format

Use this function to choose your desired aspect ratio.

XGA

4:3: This format is for 4×3 input sources.



16:9-I: This format is for 16×9 input sources, like HDTV and

DVD enhanced for Wide screen TV. (576i/p)



16:9-II: This format is for 16×9 input sources, like HDTV and

DVD enhanced for Wide screen TV. (480i/p)



Native: This format displays the original image without any

scaling.



AUTO: Automatically selects the appropriate display format.

When input is 4:3, the image is displayed as 4:3. When input is

16:9 above, the image is displayed as 16:9- I



Resize image

Aspect ratio

(source detected)

XGA model

4:3

1024 x 768 center

1024 x 576 center

854 x 480 center

16:9-I

16:9-II

No resize image, 1:1 mapping and

centered. This format shows the

original image without scaling.

Native

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

WXGA

4:3: This format is for 4×3 input sources.



16:9: This format is for 16×9 input sources, like HDTV and DVD

enhanced for Wide screen TV.

16:10: This format is for 16×10 input sources, like widescreen

 16:9 or 16:10

depend on “Screen

Type” setting.



laptops.

LBX: This format is for non-16x9, letterbox source and for users

who use external 16x9 lens to display 2.35:1 aspect ratio using

full resolution.

Native: This format displays the original image without any

scaling.



AUTO: Automatically selects the appropriate display format.

16:10 Screen

480i/p

576i/p

1080i/p

720p

4:3

1066 x 800 center

1280 x 800 center

16:10

1280 x 960 center, then get the central 1280 x 800 image

to display

LBX

1:1 map-

ping (960 x 1280 x 720

540) display

1280 x 800

1:1

mapping

centered.

1:1 mapping

centered.

Native

center

16:9 Screen

4:3

480i/p

576i/p

1080i/p

720p

960 x 720 center

1280 x 720 center

16:9

1280 x 960 center, then get the central 1280 x 720 image

to display

LBX

1:1 map-

ping (960 x 1280 x 720

540) display

1280 x 720

1:1

mapping

centered.

1:1 mapping

centered.

Native

center

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Overscan

Overscan function removes the noise in a video image. Overscan

the image to remove video encoding noise on the edge of video

source.

 Each I/O has

different setting of

“Overscan”.

Zoom

 “Overscan” and

“Zoom” can’t work at

same time.

Press the to reduce the size of an image.



Press the to magnify an image on the projection screen.



H Image Shift

Shift the projected image position horizontally.

V Image Shift

Shift the projected image position vertically.

V Keystone

Press the or to adjust image distortion vertically. If the image

looks trapezoidal, this option can help make the image rectangular.

Auto Keystone

Automatically adjusts vertical image distortion.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

DISPLAY | 3D

Choose the “On” to turn this item on ﬁrst if for 3D images.

3D Sync. Invert

 “3D Sync Invert”

only available when

3D is enabled.

Press the “On” to invert left and right frame contents.



Press the “Off” for default frame contents.



 Compatible 3D

source, 3D content

and active shutter

glasses are required

for 3D viewing.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP

Language

Choose the multilingual OSD menu. Press or into the sub

menu and then use the or key to select your preferred

language. Press “Enter” to ﬁnalize the selection.

 Rear-Desktop and

Rear-Ceiling are

to be used with a

translucent screen.

Projection

Front-Desktop



This is the default selection. The image is projected straight on

the screen.

Rear-Desktop



When selected, the image will appear reversed.

Front-Ceiling



When selected, the image will turn upside down.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Rear-Ceiling



When selected, the image will appear reversed in upside down

position.

Menu Location

Choose the menu location on the display screen.

 “Screen Type” is for

WXGA only.

Screen Type

Choose the screen type from16:10 or 16:9.

Projector ID

ID deﬁnition can be set up by menu (range 0~99), and allow user

control an individual projector by RS232. Refer to page 60~63 for

the complete list of RS232 commands.

Mute

Choose the “On” to turn mute on.



Choose the “Off” to turn mute off.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP

Volume

Press the to decrease the volume.

Press the to increase the volume.



 Volume adjustment

can also control MIC

volume.

Audio Input

The default audio settings are on the back panel of the

projector. Use this option to reassign any of the Audio Inputs

(1 or 2) to the current image source. Each Audio input can be

assigned to more than one video source.

Audio 1: VGA 1 and VGA 2.



Audio 2: S-Video/Video.



MIC: (No default video source)



RS232

RS232: Allow RS232 control of an individual projector.



(Default setting)

Network: Allow projector control via web browser (Internet



Explorer) using the network.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP | Signal

(RGB)

 “Signal” is only

supported in Analog

VGA (RGB) signal.

Automatic

Automatically selects the singal. If you use this function, the

Phase, frequency items are grayed out, and if Signal is not auto-

matic, the phase, frequency items will appear for user to manually

tune and saved in settings after that for next time projector turns

off and on again.

Phase

Synchronize the signal timing of the display with the graphic card.

If the image appears to be unstable or ﬂickers, use this function to

correct it.

Frequency

Change the display data frequency to match the frequency of

your computer’s graphic card. Use this function only if the image

appears to ﬂicker vertically.

H. Position

Press the to move the image left.



Press the to move the image right.



V. Position

Press the to move the image down.



Press the to move the image up.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP | Security

Security

On: Choose “On” to use security veriﬁcation when the turning



on the projector.

Off: Choose “Off” to be able to switch on the projector without

password veriﬁcation.



Security Timer

Use this function to set the how long (Month/Day/Hour) the

projector can be used. Once this time has elapsed you will be

requested to enter your password again.

 Password default

value is “1234” (ﬁrst

time).

Change Password

First time:



1. Press “ ” to set the password.

2. The password has to be 4 digits.

3. Use number button on the remote to enter your new

password and then press “ ” key to conﬁrm your

password.

Change Password:



1. Press “ ” to input old password.

2. Use number button to enter current password and then

press “ ” to conﬁrm.

3. Enter new password (4 digits in length) using the number

buttons on the remote, then press “ ” to conﬁrm.

4. Enter new password again and press “ ” to conﬁrm.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

If the incorrect password is entered 3 times, the projector will

automatically shut down.



If you have forgotten your password, please contact your local

ofﬁce for support.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP | Advanced

Logo

Use this function to set the desired startup screen. If changes are

made they will take effect the next time the projector is powered

on.

Dukane: The default startup screen.



User: Use stored picture from “Logo Capture” function.



Logo Capture

 For successful logo

capture, please

ensure that the on-

screen image does

not exceed the pro-

Press

to capture an image of the picture currently displayed

on screen.

Closed Captioning

jector’s native resolu- Use this function to set the desired startup screen. If changes are

tion. (XGA:1024x768

or WXGA:1280x800).

made they will take effect the next time the projector is powered

on.

Off: select “off” to turn off the closed captioning feature.



CC1:CC1 language: American English.



CC2:CC2 language (depending on the TV channel of the



user):Spanish, French, Portuguese, German, Danish.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

SETUP | Network

Network State

Display the network connection status.

DHCP

Use this function to select your desired startup screen. If you

change the setting from one to another, when you exit the OSD

menu, the new setting will take effect on next open.

On: Assign an IP address to the projector from an external



DHCP server automatically.

Off: Assign an IP address manually.



IP Address

Select an IP address.

Subnet Mask

Select subnet mask number.

Gateway

Select the default gateway of the network connected to the

projector.

DNS

Select DNS number.

Apply

Press “ ” and then choose “Yes” to apply the selection.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

How to use web browser to control your projector

1. Turn on DHCP to allow the DHCP server to automatically assign

an IP, or manually enter the required network information.

2. Then choose apply and press “ ” button to complete the

conﬁguration process.

3. Open your web browser and type in from the OSD LAN screen

then the web page will display as below:

 When you used

the projector IP

address, you

will can not link

to your service

server.

4. Open “Control Panel” to control your projector.

When making a direct connection from your computer to the

projector

Step 1: Find an IP Address (192.168.6.74) from LAN function of

projector.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Step 2: Select apply and press “Enter” button to submit function or press “menu” key to

exit.

Step 3: To open Network Connections, click Start, click Control Panel, click Network

and Internet Connections, and then click Network Connections. Click the

connection you want to conﬁgure, and then, under Network Tasks

Change settings of this connection.

, click

Step 4: On the General tab, under

This connection uses the

following items, click Internet

Protocol (TCP/IP), and then click

“Properties.”

Step 7: The Local Area Network (LAN)

Setting dialog box appears, In the

Proxy Server area, cancel the

Use a proxy server for your LAN

check box., then click “OK” button

twice.

Step 8: Open your IE and type in the IP

address of 192.168.6.74 in the

URL then press “Enter” key. The

web page will display as below:

Step 5: Click Use the following IP

address, and type in as below:

1) IP address: 192.168.6.XXX

2) Subnet mask: 255.255.0.0

3) Default gateway:192.168.6.254

Step 9: Open “Control Panel” to control

Step 6: To open Internet Options, click

IE web browser, click Internet

Options, click the Connections

tab and click “LAN Settings...”

your projector.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

Crestron RoomView Control Tool

Crestron RoomView™ provides a central monitoring station for 250+

control systems on a single Ethernet network (more are possible,

the number depends on the combination of IP ID and IP address).

Crestron RoomView monitors each projector, including projector’s

online status, system power, lamp life, network setting and hardware

faults, plus any custom attribute as deﬁned by the Administrator.

The Administrator can add, delete, or edit room information, contact

information and events, which are logged automatically by the

software for all users. (Operation UI as following image)

1. Main Screen

2. Edit Room

 Crestron Room-

View function sup-

port is dependent

on models.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

3. Edit Attribute

4. Edit Event

For more information, please visit

http://www.crestron.com & www.crestron.com/getroomview.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

OPTIONS

Source Lock

On: The projector will only search current input connection.



Off: The projector will search for other signals if the current

input signal is lost.

 With dust ﬁlter

installed, High

High Altitude

When “On” is selected, the fans will spin faster. This feature is

useful in high altitude areas where the air is thin.

Altitude mode must

be turned on. Dust

ﬁlter is Optional and

may not be required

in some regions.

Information Hide

On: Choose “On” to hide the info message.



Off: Choose “Off” to show the “searching” message.



Keypad Lock

When the keypad lock function is “On”, the control panel will be

locked however, the projector can be operated by the remote

control. By selecting “Off”, you will be able to reuse the control

panel.

 To turn off the key-

pad lock, press and

hold “Enter” key on

top of the projector

for 5 seconds.

Background Color

Use this feature to display a “Black”, “Red”, “Blue”, “Green” or

“White”, screen when no signal is available.

Reset

Choose “Yes” to return the display parameters on all menus to the

factory default settings.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

OPTIONS |

Advanced

Direct Power On

Choose “On” to activate Direct Power mode. The projector will

automatically power on when AC power is supplied, without

pressing the “ ” key on the projector control panel or on the

remote control.

Auto Power Off (min)

Sets the countdown timer interval. The countdown timer will start,

when there is no signal being sent to the projector. The projector

will automatically power off when the countdown has ﬁnished (in

minutes).

Sleep Timer (min)

Sets the countdown timer interval. The countdown timer will start,

with or without a signal being sent to the projector. The projector

will automatically power off when the countdown has ﬁnished (in

minutes).

 When Power mode

(Standby) is set

to Eco (<1W), the

VGA output, Audio

pass-through

and RJ45 will be

deactivated when

the projector is in

standby.

Power Mode (Standby)

Eco.: Choose “Eco.” to save power dissipation further < 1W.



Active: Choose “Active” to return to normal standby and the

VGA out port will be enabled.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

User Controls

OPTIONS |

Lamp Settings

Lamp Hours

Display the projection time.

Lamp Reminder

Choose this function to show or to hide the warning message

when the changing lamp message is displayed.

The message will appear 30 hours before suggested replacement

of lamp.

Brightness Mode

STD: Choose “STD” to dim the projector lamp which will lower

 When ambient tem-

perature is over 35°C

in operating, the

projector will switch

to STD automatically.



power consumption and extend the lamp life.

BRIGHT: Choose “BRIGHT” to increase the brightness.



Lamp Reset

Reset the lamp hour counter after replacing the lamp.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Troubleshooting

If you experience a problem with your projector,

please refer to the following information. If a

problem persists, please contact your local

reseller or service center.

No image appears on-screen

Ensure all the cables and power connections are correctly and

securely connected as described in the “Installation” section.



Ensure all the pins of connectors are not bent or broken.



Check if the projection lamp has been securely installed. Please

refer to the “Replacing the lamp” section.

Make sure you have removed the lens cap and the projector is

switched on.



Ensure that the “AV mute” feature is not turned on.

Partial, scrolling or incorrectly displayed image

 Press “Re-SYNC” on the remote.

If you are using a PC:



For Windows 95, 98, 2000, XP, Windows 7:

1. Open the “My Computer” icon, the “Control Panel” folder, and

then double click on the “Display” icon.

2. Select the “Settings” tab.

3. Verify that your display resolution setting is lower than or equal

to UXGA (1600 × 1200).

4. Click on the “Advanced Properties” button.

If the projector is still not projecting the whole image, you will also

need to change the monitor display you are using. Refer to the

following steps.

5. Verify the resolution setting is lower than or equal to UXGA

(1600 × 1200).

6. Select the “Change” button under the “Monitor” tab.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

7. Click on “Show all devices”. Next, select “Standard monitor

types” under the SP box; choose the resolution mode you need

under the “Models” box.

8. Verify that the resolution setting of the monitor display is lower

than or equal to UXGA (1600 × 1200).

If you are using a Notebook:



1. First, follow the steps above to adjust resolution of the

computer.

2. Press the appropriate keys listed below for your notebook

manufacturer to send signal out from notebook to projector.

Example: [Fn]+[F4]

Acer

Asus 

Dell 

Gateway

[Fn]+[F5]

[Fn]+[F8]

[Fn]+[F4]

IBM/Lenovo  [Fn]+[F7]

HP/Compaq  [Fn]+[F4]



NEC 

[Fn]+[F3]

[Fn]+[F5]

Toshiba 



Mac Apple:

System Preference Display Arrangement Mirror

display

If you experience difﬁculty changing resolutions or your monitor

freezes, restart all equipment including the projector.



The screen of the Notebook or PowerBook computer is not

displaying your presentation

If you are using a Notebook PC

Some Notebook PCs may deactivate their own screens when a

second display device is in use. Each has a different way to be

reactivated. Refer to your computer’s manual for detailed

information.

Image is unstable or ﬂickering

Use “Phase” to correct it. See page 38 for more information.

Change the monitor color setting on your computer.



Image has vertical ﬂickering bar

Use “Frequency” to make an adjustment. See page 38 for more

information.

Check and re-conﬁgure the display mode of your graphic card to

make it compatible with the projector.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Image is out of focus

Make sure the lens cap is removed.



Adjust the Focus Ring on the projector lens.

Make sure the projection screen is between the required distance.

See page 16.

The image is stretched when displaying 16:9 DVD title

When you play anamorphic DVD or 16:9 DVD, the projector will

show the best image when the projector display mode is set to

16:9 in the OSD.



If you play 4:3 format DVD titles, please change the format to 4:3

in the projector OSD.

If the image is still stretched, you will also need to adjust the

aspect ratio by referring to the following:



Please setup the display format as 16:9 (wide) aspect ratio type

on your DVD player.

Image is too small or too large

Move the projector closer to or further from the screen.

Press “Menu” button on the remote control or projector panel, go



to “DISPLAY Format” and try the different settings.



Image has slanted sides

If possible, reposition the projector so that it is horizontally

centered on the screen and below the bottom of the screen.

Press “Keystone +/-” button on the remote control or press



Use of Keystone

is not recom-

mended.



“

” on the projector panel, until the sides are vertical.

Image is reversed

Select “SETUP Projection” from the OSD and adjust the

projection direction.





English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

The projector stops responding to all controls

If possible, turn off the projector, then unplug the power cord and

wait at least 60 seconds before reconnecting power.

Check that “Keypad Lock” is not activated by trying to control the

projector with the remote control.



Lamp burns out or makes a popping sound

When the lamp reaches its end of life, it will burn out and may

make a loud popping sound. If this happens, the projector will not

turn on until the lamp module has been replaced. To replace the

lamp, follow the procedures in the “Replacing the Lamp” section on

pages 55-56.



LED lighting message

POWER/STAND-

Message

Temp-LED

Lamp-LED

BY LED

(Green/Amber)

(Red)

Standby State

(Input power cord)

Amber

Flashing

Green

Power on (Warming)

Lamp lighting

Green

Flashing

Green

Power off (Cooling)

Error (Over Temp.)

Error (Fan fail)

Flashing

Amber

Steady light



Flashing

Amber

Flashing

No light



Flashing

Amber

Error (Lamp fail)

＊ POWER/STANDBY LED be ON when OSD appears, be OFF when OSD disappears.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

On Screen Messages

Temperature warning:



Fan failed:



Lamp warning:



Out of display range:

If the remote control does not work

Check the operating angle of the remote control is within ±15°

both horizontally and vertically of one of the IR receivers on the

projector.



Make sure there are not any obstructions between the remote

control and the projector. Move to within 7 m (±0°) of the projector.

Make sure the batteries are inserted correctly.

Replace batteries if they are exhausted.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Replacing the lamp

The projector automatically detects the lamp life. When the

lamp life is nearing the end of use, you will receive a warning

message.

When you see this message, please contact your local reseller

or service center to change the lamp as soon as possible.

Make sure the projector has been cooled down for at least 30

minutes before changing the lamp.

Warning: If ceiling mounted, please use caution when

opening the lamp access panel. It is recommended to wear

safety glasses if changing the bulb when ceiling mounted.

“Caution must be used to prevent any loose parts from fall-

ing out of projector.”

Warning: Lamp compartment may be hot! Allow it to cool

down before changing the lamp!

Warning: To reduce the risk of personal injury, do not drop

the lamp module or touch the lamp bulb. The bulb may shat-

ter and cause injury if it is dropped.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

 The screws on the

lamp cover and the

lamp cannot be

removed.

 The projector

cannot be turned

on if the lamp

cover has not been

placed back on the

projector.

 Do not touch the

glass area of the

lamp. Hand oil can

cause the lamp to

shatter. Use a dry

cloth to clean the

lamp module if it

was accidentally

touched.

Lamp Replacement Procedure:

1. Switch off the power to the projector by pressing the “ ” button.

2. Allow the projector to cool down for at least 30 minutes.

3. Disconnect the power cord.

4. Unscrew the two screws on the cover. 1

5. Lift up and remove the cover. 2

6. Unscrew the two screws on the lamp module. 3

7. Lift up the lamp handle and remove the lamp module slowly and carefully. 4

To replace the lamp module, reverse the previous steps.

8. Turn on the projector and use “Lamp Reset” after the lamp module is

replaced.

Lamp Reset: (i) Press “Menu” (ii) Select “OPTIONS” (iii) Select

“Lamp Settings” (iv) Select “Lamp Reset” (v) Select “Yes”.



English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Compatibility Modes

Computer Compatibility



V-Sync (Hz)

H-Sync (KHz)

Mode

Resolution

Anglog

Digital

Anglog

Digital

VGA

640 × 350

640 × 400

640 × 480

720 × 400

800 × 600

832 × 624

1024 × 768

1152 × 870

1280 × 800

1680 × 1050

1280 × 1024

1600 × 1200

1280 × 720

1920 × 1080

120

31.50

37.90

31.50

37.90

31.50

VGA

37.90

37.50

31.50

37.90

35.20

37.90

48.10

46.90

37.90

37.50

31.50

37.90

35.20

37.90

48.10

46.90

VGA



For widescreen

resolution

VGA

SVGA

(WXGA), the

compatibility

support is

dependent on

Notebook/PC

models.



120Hz input

signals may be

dependent on

graphics cards

support.

XGA

48.40

56.50

60.00

48.40

56.50

60.00

Please note that

using resolutions

other than native

1024 x 768 (XGA

model), 1280

WXGA

49.68

65.00

63.98

75.00

45.00

49.64

65.00

63.98

75.00

45.00

x 800 (WXGA

WSXGA+(*)

SXGA

UXGA

model) may result

in some loss of

image clarity.



For WXGA model

only.

33.80

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Computer Compatibility



Mode

Resolution

V-Sync (Hz)

H-Sync (KHz)

MAC LC 13”

MAC II 13”

MAC 16”

MAC 19”

MAC

640 × 480

832 × 624

1024 × 768

1152 × 870

640 × 480

1024 × 768

1152 × 870

66.66

66.68

74.55

34.98

35.00

49.73

60.24

68.68

31.35

60.00

68.49

75.06

MAC G4

i MAC DV

Video Compatibility



NTSC

M (3.58MHz), 4.43 MHz

B, D, G, H, I, M, N

B, D, G, K, K1, L

480i/p, 576i/p,

PAL

SECAM

SDTV

HDTV

720p@50Hz/60Hz, 1080i@50Hz/60Hz, 1080p@24Hz/50Hz/60Hz

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

RS232 Commands and Protocol

Function List

RS232 Pin Assignments



RS232 shell is

grounded.

Spec.

(from projector side)

Pin no.

TXD

RXD

GND

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

RS232 Protocol Function List

XX=00-99, projector's ID,

XX=00 is for all projectors

Baud Rate : 9600

Data Bits: 8

Parity: None

Stop Bits: 1

1. There is a <CR> after

all ASCII commands.

Flow Control : None

UART16550 FIFO: Disable

Projector Return (Pass): P

Projector Return (Fail): F

2. 0D is the HEX code

for <CR> in ASCII

code.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SEND to projector

232 ASCII Code HEX Code

Function

Description

~XX00 1

~XX00 0

7E 30 30 30 30 20 31 0D

7E 30 30 30 30 20 30 0D

Power ON

Power OFF

~XX00 1 ~nnnn

7E 30 30 30 30 20 31 20 a 0D Power ON with Password

~nnnn = ~0000 (a=7E 30 30 30 30) - ~9999(a=7E 39 39 39 39)

~XX01 1

~XX02 1

~XX02 0

~XX03 1

~XX03 0

~XX04 1

~XX04 0

~XX05 1

~XX06 1

~XX07 1

~XX08 1

~XX09 1

~XX10 1

~XX12 1

~XX12 5

~XX12 6

~XX12 9

~XX12 10

7E 30 30 30 31 20 31 0D

7E 30 30 30 32 20 31 0D

7E 30 30 30 32 20 30 0D

7E 30 30 30 33 20 31 0D

7E 30 30 30 33 20 30 0D

7E 30 30 30 34 20 31 0D

7E 30 30 30 34 20 30 0D

7E 30 30 30 35 20 31 0D

7E 30 30 30 36 20 31 0D

7E 30 30 30 37 20 31 0D

7E 30 30 30 38 20 31 0D

7E 30 30 30 39 20 31 0D

7E 30 30 31 30 20 31 0D

7E 30 30 31 32 20 31 0D

7E 30 30 31 32 20 35 0D

7E 30 30 31 32 20 36 0D

7E 30 30 31 32 20 39 0D

7E 30 30 31 32 20 31 30 0D

Resync

AV Mute

Off

Mute

Freeze

Unfreeze

Zoom Plus

Zoom Minus

Up (Pan under zoom)

Down (Pan under zoom)

Left (Pan under zoom)

Right (Pan under zoom)

Direct Source Command

HDMI

VGA 1

VGA 2

S-Video

Video

~XX20 1

~XX20 2

~XX20 3

~XX20 4

~XX20 5

~XX20 7

~XX20 8

~XX20 9

7E 30 30 32 30 20 31 0D

7E 30 30 32 30 20 32 0D

7E 30 30 32 30 20 33 0D

7E 30 30 32 30 20 34 0D

7E 30 30 32 30 20 35 0D

7E 30 30 32 30 20 37 0D

7E 30 30 32 30 20 38 0D

7E 30 30 32 30 20 39 0D

Display Mode

Presentation

Bright

Movie

sRGB

User

Blackboard

Classroom

~XX21 n

~XX22 n

~XX23 n

7E 30 30 32 31 20 a 0D

7E 30 30 32 32 20 a 0D

7E 30 30 32 33 20 a 0D

Brightness

Contrast

Sharpness

n = 0 (a=30) ~ 100 (a=31 30 30)

n = 0 (a=30) ~ 31 (a=33 31)

~XX24 n

~XX25 n

~XX26 n

~XX27 n

~XX28 n

~XX29 n

~XX30 n

~XX31 n

~XX32 n

~XX33 1

7E 30 30 32 34 20 a 0D

7E 30 30 32 35 20 a 0D

7E 30 30 32 36 20 a 0D

7E 30 30 32 37 20 a 0D

7E 30 30 32 38 20 a 0D

7E 30 30 32 39 20 a 0D

7E 30 30 33 30 20 a 0D

7E 30 30 33 31 20 a 0D

7E 30 30 33 32 20 a 0D

7E 30 30 33 33 20 31 0D

Color

Red Gain

Green Gain

Blue Gain

Red Bias

Green Bias

Blue Bias

Cyan

Yellow

Magenta

Reset

n = -50 (a=2D 35 30) ~ 50 (a=35 30)

~XX34 n

~XX35 1

~XX35 2

~XX35 3

~XX35 4

7E 30 30 33 34 20 a 0D

7E 30 30 33 35 20 31 0D

7E 30 30 33 35 20 32 0D

7E 30 30 33 35 20 33 0D

7E 30 30 33 35 20 34 0D

BrilliantColor^TM

Degamma

n = 0 (a=30) ~ 10 (a=31 30)

Film

Video

Graphics

~XX36 1

~XX36 2

~XX36 3

~XX37 1

~XX37 2

~XX37 3

7E 30 30 33 36 20 31 0D

7E 30 30 33 36 20 32 0D

7E 30 30 33 36 20 33 0D

7E 30 30 33 37 20 31 0D

7E 30 30 33 37 20 32 0D

7E 30 30 33 37 20 33 0D

Color Temp.

Warm

Medium

Cold

Auto

RGB

Color Space

YUV

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

~XX39 5

~XX39 6

~XX39 9

~XX39 10

~XX39 1

7E 30 30 33 39 20 35 0D

7E 30 30 33 39 20 39 0D

7E 30 30 33 39 20 31 30 0D

7E 30 30 33 39 20 31 0D

Input Source

VGA1

VGA2

S-Video

Video

HDMI

~XX195 1

~XX195 0

7E 30 30 37 31 20 31 0D

7E 30 30 37 31 20 30 0D

Image AI

Off

~XX44 n

~XX45 n

7E 30 30 34 34 20 a 0D

7E 30 30 34 35 20 a 0D

Tint

n = 0 (a=30) ~ 100 (a=31 30 30)

Color (Saturation)

(WXGA only)

~XX60 1

~XX60 2

~XX60 5

~XX60 6

~XX60 7

7E 30 30 36 30 20 31 0D

7E 30 30 36 30 20 32 0D

7E 30 30 36 30 20 35 0D

7E 30 30 36 30 20 36 0D

7E 30 30 36 30 20 37 0D

Format

4:3

16:9/16:10

LBX

Native

AUTO

(XGA only)

~XX60 1

~XX60 2

~XX60 3

~XX60 6

~XX60 7

7E 30 30 36 30 20 31 0D

7E 30 30 36 30 20 32 0D

7E 30 30 36 30 20 35 0D

7E 30 30 36 30 20 36 0D

7E 30 30 36 30 20 37 0D

Format

4:3

16:9-I

16:9-II

Native

AUTO

~XX61 n

~XX62 n

~XX63 n

~XX64 n

~XX66 n

~XX69 1

~XX69 0

~XX230 1

~XX230 0

~XX231 1

~XX231 0

7E 30 30 36 31 20 a 0D

7E 30 30 36 32 20 a 0D

7E 30 30 36 33 20 a 0D

7E 30 30 36 34 20 a 0D

7E 30 30 36 36 20 a 0D

7E 30 30 36 39 20 31 0D

7E 30 30 36 39 20 30 0D

7E 30 30 32 33 30 20 31 0D

7E 30 30 32 33 30 20 30 0D

7E 30 30 32 33 31 20 31 0D

7E 30 30 32 33 31 20 30 0D

Overscan

Zoom

n = 0 (a=30) ~ 10(a=31 30)

n = -5 (a=2D 35) ~ 25 (a=32 35)

n = -50 (a=2D 35 30) ~ +50 (a=35 30)

n = -40 (a=2D 34 30) ~ 40 (a=34 30)

H Image Shift

V Image Shift

V Keystone

Auto Keystone

3D Mode

3D Sync Invert

Off

~XX70 1

~XX70 2

~XX70 3

~XX70 4

~XX70 5

~XX70 6

~XX70 7

~XX70 8

~XX70 9

~XX70 10

~XX70 11

~XX70 12

~XX70 13

~XX70 14

~XX70 15

~XX70 16

~XX70 17

~XX70 18

~XX70 19

~XX70 20

~XX70 21

~XX70 22

~XX70 23

~XX70 25

7E 30 30 37 30 20 31 0D

7E 30 30 37 30 20 32 0D

7E 30 30 37 30 20 33 0D

7E 30 30 37 30 20 34 0D

7E 30 30 37 30 20 35 0D

7E 30 30 37 30 20 36 0D

7E 30 30 37 30 20 37 0D

7E 30 30 37 30 20 38 0D

7E 30 30 37 30 20 39 0D

7E 30 30 37 30 20 31 30 0D

7E 30 30 37 30 20 31 31 0D

7E 30 30 37 30 20 31 32 0D

7E 30 30 37 30 20 31 33 0D

7E 30 30 37 30 20 31 34 0D

7E 30 30 37 30 20 31 35 0D

7E 30 30 37 30 20 31 36 0D

7E 30 30 37 30 20 31 37 0D

7E 30 30 37 30 20 31 38 0D

7E 30 30 37 30 20 31 39 0D

7E 30 30 37 30 20 32 30 0D

7E 30 30 37 30 20 32 31 0D

7E 30 30 37 30 20 32 32 0D

7E 30 30 37 30 20 32 33 0D

7E 30 30 37 30 20 32 35 0D

Language

English

German

French

Italian

Spanish

Portuguese

Polish

Dutch

Swedish

Norwegian/Danish

Finnish

Greek

Traditional Chinese

Simplified Chinese

Japanese

Korean

Russian

Hungarian

Czechoslovak

Arabic

Thai

Turkish

Farsi

Vietnamese

~XX71 1

~XX71 2

~XX71 3

~XX71 4

7E 30 30 37 31 20 31 0D

7E 30 30 37 31 20 32 0D

7E 30 30 37 31 20 33 0D

7E 30 30 37 31 20 34 0D

Projection

Front-Desktop

Rear-Desktop

Front-Ceiling

Rear-Ceiling

~XX72 1

~XX72 2

~XX72 3

~XX72 4

~XX72 5

7E 30 30 37 32 20 31 0D

7E 30 30 37 32 20 32 0D

7E 30 30 37 32 20 33 0D

7E 30 30 37 32 20 34 0D

7E 30 30 37 32 20 35 0D

Menu Location

Top Left

Top Right

Centre

Bottom Left

Bottom Right

(WXGA only)

~XX90 1

~XX90 0

7E 30 30 39 31 20 31 0D

7E 30 30 39 31 20 30 0D

Screen Type

16:10

16:9

~XX91 1

~XX91 0

~XX73 n

~XX74 n

~XX75 n

~XX76 n

7E 30 30 39 31 20 31 0D

7E 30 30 39 31 20 30 0D

7E 30 30 37 33 20 a 0D

7E 30 30 37 34 20 a 0D

7E 30 30 37 35 20 a 0D

7E 30 30 37 36 20 a 0D

Signal

Automatic

Frequency

Phase

H. Position

V. Position

Off

n = -5 (a=2D 35) ~ 5 (a=35) By signal

n = 0 (a=30) ~ 31 (a=33 31) By signal

n = -5 (a=2D 35) ~ 5 (a=35) By timing

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

~XX77 n

7E 30 30 37 37 20 aabbcc 0D Security

Security Timer

Month/Day/Hour

n = mm/dd/hh

mm = 00 (aa=30 30) ~ 12 (aa=31 32)

dd = 00 (bb=30 30) ~ 30 (bb=33 30)

hh = 00 (cc=30 30) ~ 24 (cc=32 34)

~XX78 1

~XX78 0

7E 30 30 37 38 20 31 0D

7E 30 30 37 38 20 32 0D

Security

Off

(0/2 for backward compatible)

~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 01 (a=30 31) ~ 99 (a=39 39)

~XX80 1

~XX80 0

~XX81 n

7E 30 30 38 30 20 31 0D

7E 30 30 38 30 20 30 0D

7E 30 30 38 31 20 a 0D

Mute

Off

Volume

n = 0 (a=30) ~ 10 (a=31 30)

~XX82 1

~XX82 2

~XX83 1

7E 30 30 38 32 20 31 0D

7E 30 30 38 32 20 32 0D

7E 30 30 38 33 20 31 0D

Logo

Optoma

User

Logo Capture

~XX88 0

~XX88 1

~XX88 2

7E 30 30 38 38 20 30 0D

7E 30 30 38 38 20 31 0D

7E 30 30 38 38 20 32 0D

Closed Captioning

Off

cc1

cc2

~XX100 1

~XX100 0

~XX100 3

~XX101 1

~XX101 0

~XX102 1

~XX102 0

~XX103 1

~XX103 0

7E 30 30 31 30 30 20 31 0D

7E 30 30 31 30 30 20 30 0D

7E 30 30 31 30 30 20 33 0D

7E 30 30 31 30 31 20 31 0D

7E 30 30 31 30 31 20 30 0D

7E 30 30 31 30 32 20 31 0D

7E 30 30 31 30 32 20 30 0D

7E 30 30 31 30 33 20 31 0D

7E 30 30 31 30 33 20 30 0D

Source Lock

Off

Next Source

High Altitude

Off

Information Hide

Keypad Lock

~XX104 1

~XX104 2

~XX104 3

~XX104 4

~XX104 5

7E 30 30 31 30 34 20 31 0D

7E 30 30 31 30 34 20 32 0D

7E 30 30 31 30 34 20 33 0D

7E 30 30 31 30 34 20 34 0D

7E 30 30 31 30 34 20 35 0D

Background Color

Blue

Black

Red

Green

White

~XX105 1

~XX105 0

~XX106 n

~XX107 n

~XX114 1

~XX114 0

7E 30 30 31 30 35 20 31 0D

7E 30 30 31 30 35 20 30 0D

7E 30 30 31 30 36 20 a 0D

7E 30 30 31 30 37 20 a 0D

7E 30 30 31 31 34 20 31 0D

7E 30 30 31 31 34 20 30 0D

Advanced

Direct Power On

Off

Auto Power Off (min) n = 0 (a=30) ~ 180 (a=31 38 30) , step=5

Sleep Timer (min) n = 0 (a=30) ~ 995 (a=39 39 35) , step=5

Power Mode(Standby) Eco.(<=1W)

Active

~XX109 1

~XX109 0

~XX110 1

~XX110 0

~XX111 1

~XX111 0

7E 30 30 31 30 39 20 31 0D

7E 30 30 31 30 39 20 30 0D

7E 30 30 31 31 30 20 31 0D

7E 30 30 31 31 30 20 30 0D

7E 30 30 31 31 31 20 31 0D

7E 30 30 31 31 31 20 30 0D

Lamp Reminder

Brightness Mode

Lamp Reset

Off

Bright

STD

Yes

~XX112 1 7E 30 30 31 31 32 20 31 0D Reset Yes

~XX210 n 7E 30 30 32 30 30 20 n 0D Display message on the OSD n: 1-30 characters

SEND to emulate Remote

~XX140 1

~XX140 3

~XX140 4

~XX140 5

~XX140 6

~XX140 7

~XX140 8

~XX140 9

~XX140 10

~XX140 11

~XX140 12

~XX140 13

~XX140 14

~XX140 15

~XX140 16

~XX140 17

~XX140 18

~XX140 19

~XX140 20

~XX140 21

~XX140 22

~XX140 23

~XX140 24

~XX140 25

~XX140 26

~XX140 27

7E 30 30 31 34 30 20 31 0D

7E 30 30 31 34 30 20 33 0D

7E 30 30 31 34 30 20 34 0D

7E 30 30 31 34 30 20 35 0D

7E 30 30 31 34 30 20 36 0D

7E 30 30 31 34 30 20 37 0D

7E 30 30 31 34 30 20 38 0D

7E 30 30 31 34 30 20 39 0D

7E 30 30 31 34 30 20 31 30 0D

7E 30 30 31 34 30 20 31 31 0D

7E 30 30 31 34 30 20 31 32 0D

7E 30 30 31 34 30 20 31 33 0D

7E 30 30 31 34 30 20 31 34 0D

7E 30 30 31 34 30 20 31 35 0D

7E 30 30 31 34 30 20 31 36 0D

7E 30 30 31 34 30 20 31 37 0D

7E 30 30 31 34 30 20 31 38 0D

7E 30 30 31 34 30 20 31 39 0D

7E 30 30 31 34 30 20 32 30 0D

7E 30 30 31 34 30 20 32 31 0D

7E 30 30 31 34 30 20 32 32 0D

7E 30 30 31 34 30 20 32 33 0D

7E 30 30 31 34 30 20 32 34 0D

7E 30 30 31 34 30 20 32 35 0D

7E 30 30 31 34 30 20 32 36 0D

7E 30 30 31 34 30 20 32 37 0D

Power

Mouse Up

Mouse Left

Mouse Enter

Mouse Right

Mouse Down

Mouse Left Click

Mouse Right Click

Up/Page +

Left/Source

Enter (for projection MENU)

Right/Re-SYNC

Down/Page -

Keystone +

Keystone -

Volume -

Volume +

Brightness (1)

Menu (2)

3D(3)

HDMI (4)

Freeze (5)

AV Mute (6)

S-Video (7)

VGA (8)

Video (9)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

SEND from projector automatically

232 ASCII Code HEX Code

Function

Projector Return

Description

System status

INFOn

n : 0/1/2/3/4/6/7/8 = Standby/Warming/Cooling/Out of Range/

Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out

READ from projector

232 ASCII Code HEX Code

Function

Projector Return

Description

~XX121 1

~XX122 1

~XX123 1

7E 30 30 31 32 31 20 31 0D

7E 30 30 31 32 32 20 31 0D

7E 30 30 31 32 33 20 31 0D

Input Source

Software Version

Display Mode

OKn

OKdddd

OKn

n : 0/1/2/3/4/5 = None/VGA1/VGA2/S-Video/Video/HDMI

dddd: FW version

n : 0/1/2/3/4/5/6/7/8 = None/Presentation/Bright/Movie/sRGB/

User/Blackboard/Classroom/3D

~XX124 1

~XX125 1

~XX126 1

~XX127 1

7E 30 30 31 32 34 20 31 0D

7E 30 30 31 32 35 20 31 0D

7E 30 30 31 32 36 20 31 0D

7E 30 30 31 32 37 20 31 0D

Power State

Brightness

Contrast

OKn

n : 0/1 = Off/On

Aspect Ratio

(EW610ST) n: 0/1/2/3/4 = 4:3/16:9 or 16:10 */LBX/Native/AUTO

(EX610ST) n: 0/1/2/3/4 = 4:3/16:9-I/16:9-II/Native/AUTO

*16:9 or 16:10 depend on Screen Type setting

~XX128 1

~XX129 1

7E 30 30 31 32 38 20 31 0D

7E 30 30 31 32 39 20 31 0D

Color Temperature

Projection Mode

OKn

n : 0/1/2 = Warm/Medium/Cold

n : 0/1/2/3 = Front-Desktop/Rear-Desktop/Front-Ceiling/Rear-Ceiling

~XX150 1

7E 30 30 31 35 30 20 31 0D

Information

OKabbbbccdddde

a : 0/1 = Off/On

bbbb: Lamp Hour

cc: source 00/01/02/03/04/05=

None/VGA1/VGA2/S-Video/Video/HDMI

dddd: FW version

e : Display mode 0/1/2/3/4/5/6/7/8=

None/Presentation/Bright/Movie/sRGB/User/

Blackboard/Classroom/3D

~XX151 1

~XX108 1

~XX108 2

7E 30 30 31 35 31 20 31 0D

7E 30 30 31 30 38 20 31 0D

Model name

Lamp Hours

Cumulative Lamp Hours

OKn

OKbbbb

OKbbbbb

n: 6/7/8/9=EW610ST/EX610ST/EW605ST/EX605ST

bbbb: Lamp Hour

bbbbb: (5 digits) Total Lamp Hours

Note; Dukane projector model. 8412 is produced by Optoma Technology Inc.

Similar models are sold worldwide and. correspond to model number TW610ST.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Ceiling Mount Installation

1. To prevent damage to your projector, please use the

Dukane ceiling mount.

2. If you wish to use a third party ceiling mount kit, please

ensure the screws used to attach a mount to the projector

meet the following specifications:

Screw type: M3*3



Maximum screw length: 10mm



Minimum screw length: 7.5mm





Please note that

damage resulting

from incorrect

installation will void

the warranty.

Warning:

1. If you buy a ceiling

mount from another

company, please

be sure to use the

correct screw size.

Screw size will vary

depending on the

thickness of the

306.00

mounting plate.

76.52

110.00

2. Be sure to keep

at least 10 cm gap

between the ceiling

and the bottom of the

projector.

3. Avoid installing the

projector near a heat

source.

Unit: mm

59.00

80.48

Lens

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Regulation & Safety Notices

This appendix lists the general notices of your projector.

FCC notice

This device has been tested and found to comply with the

limits for a Class B digital device pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This device generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this device does cause

harmful interference to radio or television reception, which can

be determined by turning the device off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television

technician for help.

Notice: Shielded cables

All connections to other computing devices must be

made using shielded cables to maintain compliance with

FCC regulations.

Caution

Changes or modiﬁcations not expressly approved by the

manufacturer could void the user’s authority, which is

granted by the Federal Communications Commission, to

operate this projector.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received,

including interference that may cause undesired

operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian

ICES-003.

Remarque à l’intention des utilisateurs

canadiens

Cet appareil numerique de la classe B est conforme a la

norme

NMB-003 du Canada.

Declaration of Conformity for EU

countries

• EMC Directive 2004/108/EC (including amendments)

• Low Voltage Directive 2006/95/EC

• R & TTE Directive 1999/5/EC (if product has RF function)

Disposal instructions

Do not throw this electronic device into the

trash when discarding. To minimize pollution

and ensure utmost protection of the global

environment, please recycle it.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Dukane Audio Visual

2900 Dukane Drive

Toll Free: 888-245-1966

St. Charles, Illinois 60174

www.dukane.com/audiovisual

Fax: 630.584.5156

e-mail: [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

Compaq Network Card 157299 B21 User Manual
Country Flame Stove HR 01 User Manual
CTX Computer Monitor PV520 User Manual
Cypress Computer Hardware CY8CNP101 User Manual
Delta Electronics Network Card VFDB 4132 Series User Manual
Digital Antenna Network Card DA298 User Manual
Fisher Price Motorized Toy Car 75547 User Manual
GE Oven 169089 User Manual
Global Machinery Company Chainsaw ELC2000 User Manual
Global Machinery Company Planer 420W User Manual