| SMT Power Inductor   SIWCM73L Type   Features   RoHS compliant.   Low profile (2.5mm max. height) SMD type.   Magnetically shielded,suitable for high density mounting.   High energy storage and low DCR.   Provided with embossed carrier tape packing.   Idel for power source circuits, DC-DC converter,   DC-AC inverters inductor application.   In addition to the standard versions shown here,   customized inductors are available to meet your exact requirements.   Mechanical Dimension:   RECOMMENDED PAD PATTERNS   3.0   2.5   C B F UNIT:mm/inch   A = 7.0 0.3 / 0.276 0.012   B = 7.0 0.3 / 0.276 0.012   C = 2.5/ 0.098 Max.   D = 4.0 0.1 / 0.157 0.004   E = 1.5/ 0.059   E D A F = 2.0/ 0.079   3.0   25oC: 1KHz, 1V   Electrical Characteristics:   2 1 DCR   ) MAX   L Irated   (Adc)   PART NO.   ( (uH)   10000.00   1000.00   100.00   10.00   SIWCM73L-100   SIWCM73L-120   SIWCM73L-150   SIWCM73L-180   SIWCM73L-220   SIWCM73L-270   SIWCM73L-330   SIWCM73L-390   SIWCM73L-470   SIWCM73L-560   SIWCM73L-680   SIWCM73L-820   SIWCM73L-101   SIWCM73L-121   SIWCM73L-151   SIWCM73L-181   SIWCM73L-221   SIWCM73L-271   SIWCM73L-331   SIWCM73L-391   SIWCM73L-471   SIWCM73L-561   SIWCM73L-681   SIWCM73L-821   SIWCM73L-102   SIWCM73L-122   SIWCM73L-152   SIWCM73L-182   SIWCM73L-222   SIWCM73L-272   SIWCM73L-332   SIWCM73L-392   10   0.200   0.700   0.616   0.572   0.524   0.468   0.432   0.392   0.372   0.340   0.284   0.276   0.256   0.228   0.208   0.188   0.168   0.160   0.144   0.128   0.120   0.104   0.096   0.088   0.080   0.072   0.070   0.064   0.055   0.050   0.046   0.040   0.037   12   15   0.220   0.291   0.307   0.355   0.412   0.456   0.580   0.671   0.735   0.981   1.110   1.250   1.400   1.850   2.110   2.540   4.130   4.350   4.860   6.640   7.250   8.180   9.680   15.400   18.100   18.800   20.600   32.300   36.800   40.900   48.800   392   332   272   222   182   152   122   102   821   681   561   471   391   331   271   221   181   151   121   101   820   680   560   470   390   330   270   220   180   150   120   100   18   22   27   33   39   47   56   68   82   100   120   150   180   220   270   330   390   470   560   680   820   1000   1200   1500   1800   2200   2700   3300   3900   1.00   0.00   0.01   0.10   1.00   10.00   CURRENT (A)   1. Tolerance of inductance: 30% for 10~82uH, 20% for 100~820uH, 10% for 1000~3900uH.   2. Irated is the DC current which cause the inductance drop 10% typical of its nominal inductance without current   and the surface temperature of the part increase less than 45oC.   3. Operating temperature : -20oC to 105oC (including self-temperature rise).   DELTA ELECTRONICS, INC.   (TAOYUAN PLANT CPBG)   252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.   TEL: 886-3-3591968; FAX: 886-3-3591991   66   Download from Www.Somanuals.com. All Manuals Search And Download.   |