LCD COLOR TELEVISION
W260F8U
W320F8U
W370F8U
OPERATION MANUAL
Please read this manual carefully before operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
All the features and specifications are subject to change without notice for improvement.
W260F8U/W320F8U/W370F8U
JUJ6.491.1164
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Important Safety Instructions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order to prevent potential danger, please observe the following instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the service life of your LCDTV
product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product
is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for
future reference.
3. Heed all warnings--- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Attachments---Only use attachments/accessories specified by the manufacturer. Do not use
attachments not recommended by the manufacturer. Use of improper attachments can result in
accidents.
6. Power source---This product is intended to be supplied by a listed power supply indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system.
7. Power cord protection ---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids---Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short internal
parts. For the same reason, do not spill water or liquid on the product.
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
11. Damage requiring service---If any of the following conditions occurs, unplug the power cord from the
AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into
the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating
instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive
adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
PAGE 1
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any
noticeable abnormality in the product indicates that the product needs servicing.
12. Replacement parts---In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or
other danger.
13. Safety checks---Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
14. Wall mounting---Be sure to install the product according to the method recommended by the
manufacturer. This is a safety feature.
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. Do not place the
product on an unstable trolley, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. When mounting the
product on a wall, be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the manufacturer.
16. Careful move---When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. Sudden stops,
excessive force and uneven floor surfaces can cause the product to fall
from the trolley.
17. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection for this television equipment during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage
to the equipment due to lightning and power-line surges.
18. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may
result in fire, electric shock, or other hazards.
19. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the
cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or
shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer’s instructions are followed.
21.Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
22.Panel protection---The LCD panel used in this product is made of glass.
PAGE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Therefore, it can break when the product is dropped or impacted upon by
other objects. Be careful not to be injured by broken glass pieces in case
the LCD panel breaks.
23.Pixel defect---The LCD panel is a very high technology product, giving
you finely detailed pictures. Occasionally, a few non-active pixels may
appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
mportant Safety Instructions
Using the Remote Control
●Use the remote control by pointing it towards the remote sensor window
of the set. Objects between the remote control and sensor window may
prevent proper operation. Cautions regarding use of remote control
Note: the illustration is for your reference only, the remote sensor may
locate differently with different model.
Cautions regarding use of remote control
● Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
● Do not install or place the remote control under direct sunlight. The heat may cause
deformation of the unit.
●The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or
operate the remote control closer to the remote sensor window.
Batteries for Remote Control
S
If the remote control fails to operate the LCDTV functions, replace the batteries in the remote control.
1 Open the battery cover.
2 Insert two size-AAA batteries.
● Place the batteries with their terminals corresponding to the (+) and (-)
indications in the battery compartment.
3 Replace the cover until the lock clicks.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
● Place batteries with their terminals corresponding to the (+) and (–) indications.
● Different types of batteries have different characteristics. Do not mix batteries of different types.
● Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a cloth.
● The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
PACKING LIST
LCD TV
1
1
1
1
2
Operation Manual
Infrared Remote Control
AC Power Cable
AAA Batteries
Note:
Please keep the wrapping box and the padding well for future convenient use when you convey them.
GENERAL INFORMATION
„
„
Radio Frequency input; support CATV
Capable of receiving the full-append cable programs in 470MHZ
AV input
Capable of receiving NTSC，PAL，SECAM color system; Convenient to watch VCR
(video cassette recorder), Pickup Camera, other Disc’s programs
„
AV output
Capable of transmitting signal of different AV/RF systems to other AV receivers through
the current AV cable
„
„
Y/C component signal input (same to S-Video input)
Convenient to receive the Y/C high definition component signal from DVD
YPbPr input
Capable of receiving the high definition YPbPr signal in 480i, 480p, 576i, 720p, 1080i,
and 1080p formats
„
PC input
a. Convenient to connect with the host computer
b. Use as the display terminal
c. Connect the 3.5mm(diameter) audio cord to your computer’s audio main board, you
can listening the beautiful music transmitted from your host computer
DVI input
„
Convenient to receive DVI signal
PIP, POP, PBP function
„
„
„
„
„
„
Turn on with intelligence
Zoom mode
LTI, CTI, and black field
BBE sound technology
MTS sound technology
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
„
„
„
„
„
„
„
„
Trusurround sound technology
Full-light display
Picture amending display function
Fleshtone enhancement and improvement
Super definition display panel
3:2, 2:2 Pull Down
TV program scan function
Timer function
Automatically off at certain preset time, and enters into the standby mode
Blue background with noise reduction
„
„
In TV, AV1,AV2 and YPbPr modes, screen displays soft blue background if there is no
signal input
Auto Off if no signal input
In TV mode, the LCD TV will automatically power off within 15 minutes and enter into
the Power Energy Saving Mode if there is no signal input.
Multi Language On-Screen Display menu
„
„
Ordinary and graphical user interface makes the menu operation more user-friendly
Power Energy Saving Mode (power management mode)
In PC mode, the LCD TV will automatically power off within 15 seconds and enter into
the Power Energy Saving Mode if there is no VGA signal input. It will automatically exit
from the Power Energy Saving Mode and work again when it received a valid VGA
signal or press any button on the panel/remote control.
Plug and Play
„
„
No installation software is needed to use the TV as computer terminal display
equipment
Auto adjustment
Adjust the picture’s quality automatically
„
„
„
No flicker, no radiation, environment-protective and healthy
Legerity, convenient, low power consumption
Favorite Channel, we can edit or select favorite channels conveniently
BRIEF INTRODUCTION
Front Panel
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
W260F8U/W320F8U
Infrared Receiver
Indicator Light
W370F8U
Infrared Receiver
Indicator Light
Panel Buttons
W260F8U/W320F8U
W370F8U
Button
【TV/AV】
【MENU】
Description
To switch among TV, AV1, AV2, YPbPr, PC, and DVI modes.
The same function to【AV】 on remote control.
To enter or exit from the OSD (On-Screen Display) menu.
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
【VOL-】
【VOL+】
To decrease the sound volume. Adjust functions in menu operation.
To increase the sound volume. Adjust functions in menu operation.
1.To decrease channel number in TV mode
2. to select functions in menu operation.
1.To increase channel number in TV mode
2.to select functions in menu operation.
To turn the LCD TV on or enter into STANDBY.
【CH-】
【CH+】
【
】
The same function to【
】on remote control.
Note:
In this operation manual, 【】symbol means Button.
Rear Panel
AV Input(1)
AC Input
Items
Description
AC input
AC power input jack
Signal input/output terminal
AV input (1), headphone output, see illustration 1
TV signal input, AV input (2), AV output , YPbPr
input, see illustration 2
Signal input/output terminal
Signal input/output terminal
PC and DVI input, see illustration 3
Enlarged View of Signal Input/Output Terminals 1:
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Enlarged View of Signal Input/Output Terminals 2:
Enlarged View of Signal Input/Output Terminals 3:
Items
Description
One-way AV input port; one-way S-Video input terminal; S-Video 1 is the first if
VIDEO, S-Video 1 connect at one time, and the screen displays AV1 (Y/C)
AV IN (1)
HEADPHONE
OUT
Headphone audio signal output
One-way AV input port; one-way S-Video input terminal; S-Video 2 is the first if
VIDEO, S-Video 2 connect at one time, and the screen displays AV2 (Y/C)
AV IN(2)
AV OUT
For TV, AV1, and AV2 modes only
Capable of transmitting YPbPr signal from DVD or other equipments to YPbPr
input port
COMPONENT IN
DVI IN
PC IN
Digital video signal input
PC signal input
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
REMOTE CONTROL
Screen Size Mode Selection
Power On/Off
Recall
Channel Number
Signal Source Selection
Picture Mode Selection
Invalid Button
Sound Mode Selection
On-screen Display Menu
Invalid Button
Channel Up
Enter
Volume Up
Volume Down
Channel Down
Invalid Buttons
Display
Sleep Timer
Sound Mute
Picture Still
Scan
MTS
Invalid Button
Favorite
Invalid Buttons
PIP Channel Up
Location
PIP Swap
PIP Source Selection
PIP Still
PIP Size
PIP On/Off
PIP Channel Down
PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
TV Functions Except Teletext Functions
1 . RECALL : Return to last viewed program
2 . ZOOM : Adjust displayable aspect ratio
3 . POWER ON/OFF : Switch on or off TV set
4 . 0-9 Number Keys : Key in the alphanumeric digits to switch to the designated channel
directly
5 . AV : Toggle between different signal sources available
6 . MENU : To go to the On Screen Display(OSD) menus
7 . P MODE : Select different mode of picture setting
8 . S MODE : Select different mode of sound setting
9 . P+ : Scroll to next channel
10 . P- : Scroll to previous channel
11 . V- :Decrease audio volume
12 . V+ : Increase audio volume
13 . OK : Select or confirm sub menu of the OSD
14 . DISPLAY : Show info of current program
15 . SLEEP : Select time of TV to sleep mode
16 . MUTE : Mute sound
17 . ∞I/II: Select between mono or stereo and SAP
18. SCAN : Enter multi pip quickly
19 . FAVOR : Edit or select the favorite channels
20 . STILL : Freeze the current picture
21 . PIP SOURCE SELECTION : Select source of sub-Picture source
22 . PIP LOCATION : Adjust position of Picture in PIP
23 . PIP CHANNEL UP : Switch to the next channel of sub-Picture
24 . PIP SWAP : Interchange main picture displayed with sub-Picture source
25 . PIP STILL : Freeze screen of sub-Picture source
26 . PIP SIZE : Adjust size or mode of sub-Picture
27. PIP CHANNEL DOWN : Switch to the previous channel of sub-Picture
28. PIP ON/OFF : Turn on or off sub-Picture function
PAGE 10
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
INSTALLATION
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated
location.
2. Connect the output terminal of RF cable to the corresponding TV input terminal.
3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV
with AV connecter. Ensure that every AV signal cable is connected correctly to the
corresponding port.
4. Connect one side of PC, DVI terminals to the corresponding signal source terminal, and
connect the other side to the corresponding LCD TV terminal. Screw down the
thumbscrews on both sides to secure it. Affix the plug with care to avoid damage.
5. Connect the power cord to the AC outlet. Do ensure that other connected devices to the
same power source are switched off.
Caution:
Please refer the power range of this product to the back label on the back cover, do not
connect to any power supply, which is out of this range. When unplugging the power cord,
do not touch the metal part.
When connecting, plug directly and lightly to the interface, otherwise you will damage
the stitch.
GENERAL OPERATION
To Turn the TV On
1. When you turn on the power, the indicator light on the front panel will blink till the TV
displays pictures.
2. In Standby mode, press 【 】on the remote control or front panel to enter to Power On
mode.
To Turn the TV Off
1. Press【 】on the remote control or the front panel to switch off the TV.
2. Unplug the power cord from the AC outlet to turn the TV off completely.
Caution: The TV will be shut off automatically when the power trips. The following will occur
if the power cord is plugged the AC outlet then:
a. The TV will be in standby mode when switched on
b. The TV will be automatically on if it was in other modes (such as AV/PC
mode) apart from TV mode
Do not turn on/off the TV too often
Auto Off if No Signal Input
The TV will auto off and enter into Standby mode after 15 minutes when there is no signal
(For instance, no program signal transmitted from the TV Station) input or no operation of
pressing buttons.
Indicator Light
Status
Working mode
Standby
Timer On
Timer Off
Light Color
Off
Description
The TV works normally
In Standby Mode
Timer On is valid.
Timer Off is valid
Red
Green
Green
Power Off
No Indicator
The TV is turned off
Sleep in PC/DVI mode; To start working again
by pressing any key or any signal is received
Sleep (PC, DVI)
Yellow
PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
MENU OPERATION
1. Use the On Screen Display MENU to adjust the picture’s quality.
2. multiple operating languages are available.
3. The display time for the menu ranges from 3~60 seconds. This can be adjusted in the
General Setting menu.
4. Use the Panel buttons or the Remote Control to operate
the MENU.
FUNCTION INTRODUCTION
Using the Channel Setting Menu (For TV use Only)
1) Press【MENU】and then use【V+】/【V-】 to select the
Channel Setting menu in TV mode.
2) Use 【P+】/【P-】to make the desired adjustment.
Current Channel
Press 【V+】/【V-】 to increase/decrease the channel
number.
Channel Label
Press【OK】to enter the edit mode.
Press【P+】/【P-】to select the desired letter, press【V+】
/【V-】for next operation.
Skip
After Auto Search, there may be some repeated programs
stored. Skipping the repeated programs can shorten the
program selection.
1. Press【P+】/【P-】to search for the Program skipped.
2. Input the channel number directly to resume the Program Number skipped.
Auto Search
In the Channel Setting Menu, press 【P+】/【P-】
to select Auto Search and press【OK】【/ V+】to start
Auto Searching mode.
1. During searching, the sound and color
systems are automatically adjusted and
programs are stored.
2. When search is finished, all 125 channels are stored, o【r MENU】is pressed during the
search process, the search will automatically stop and go to the channel setting menu
with channel one.
Manual Search
(This option would be in gray ,which means invalid to operate in the
current mode)
In TV mode, select Manual Search option and press【OK】/【V+】to enter into Manual
Search .
PAGE 12
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Fine (This option would be in gray ,which means invalid to operate in the current
mode)
When the picture and sound of a channel are not satisfactory after Auto Search or Manual
Search, please use the Fine function.
Note:
During auto search, manual search, and fine tune operation, you will be asked to enter the
password if any program is locked.
Channel Table
Two kinds of program list, Air & Cable for you to choose, 2~69 for Air list, and 1~125 for
Cable list. (for U.S.A users)
Auto Scan
In TV mode, select Auto Scan to activate the scan mode. All pictures will be displayed in the
current channel. The current program will be displayed in the middle of the screen, with
twelve small pictures around the middle picture. All pictures are scanned, beginning with the
current program, from the upper-left side screen in clockwise direction. Use 【P+】/【P-】
and【V+】/【V-】to select the desired channel; Use 【OK】to exit from the Auto Scan mode
and watch only the selected channel. Use【MENU】to exit from the Auto Scan mode directly.
Exchange (This option would be in gray ,which means invalid to operate in the
current mode)
Using the Picture Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select the
Picture Setting menu.
2)Press【P+】/【P-】to make the desired adjustment.
Full light Watch
Adjusts the brightness of the LCD TV according to the
environment.
Picture Mode
Four modes to be selected: Standard, Mild, Bright, User.
Brightness
To adjust the picture’s brightness.
Contrast
To adjust the picture’s contrast.
Saturation
To adjust the picture’s saturation.
Sharpness
To adjust the picture’s definition.
Hue
To adjust the picture’s tint. (For NTSC signal only)
PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Color Temp
Four modes can be chosen: Warm, Normal, Cool, and User. (User mode is valid for PC &
DVI only)
Fleshtone
To adjust the human skin tones
Using the Audio Setting Menu
1) Press【MENU】and then use【V+】/【V-】to select the Audio Setting menu.
2) Press【P+】/【P-】to make the desired adjustment.
Sound Mode
To select the desired sound mode among Standard, News, Music and User
Bass
To adjust the accompanying sound’s bass
Treble
To adjust the accompanying sound’s treble
Surround
To select the surround mode among Off, Normal and
Spatial
Balance
To adjust the balance between the left and right tracks
MTS
1. Stereo Select for stereo reception when viewing a
program
2. Select to automatically switch the LCD TV to second
audio programs when a signal is received. (If no SAP
signal is presented, the LCD TV remains in stereo
mode.)
3.Select for mono reception (Use to reduce noise during
weak stereo broadcasts).
BBE
To turn BBE On or Off
TruSurround
To turn TruSurround On or Off
Volume
To increase or decrease the volume
Using the General Setting Menu
1) Press【MENU】and then use【V+】/【V-】to select the General Setting menu.
2) Press【P+】/【P-】to make the desired adjustment.
PAGE 14
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Language
To select the different languages displayed
OSD H Position
To adjust the OSD position horizontally
OSD V Position
To adjust the OSD position vertically
OSD Timeout
To adjust the length of time the OSD to be displayed on
the screen without any commands
Blue Screen
To set the Blue Screen on/off when there is no signal
input in TV, AV, AV1, AV2, YPbPr modes
Close Caption
Only valid for U.S.A users
Scaler Mode
To select viewable screen modes of Fill Screen, 4:3, Wide, Cinema and Sub Title.
Factory Reset
All users’ settings can be reset to the default settings except the TV programs
Transparency
To adjust the OSD transparency
Using the Timer Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select
the Timer Setting menu.
2) Press【P+】/【P-】to make the desired adjustment.
Sleep Time
To set the sleep time of the TV. This can be set with the
remote control 【SLEEP】button.
Current Time
Press【OK】/【V+】to enter the mode.
Press【V+】【/ V-】to set the Minute/Hour and press【P+】
/【P-】to adjust the time value.
On Time
Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value.
On Channel
To set the default channel when turning on the TV. Press【V+】/【V-】to change the channel
number.
PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Off Time
Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value.
Timer Mode
Set the clock time mode.
Using the Vchip Setting
1) Press 【MENU】and then use 【V+】/【V-】to select
the Vchip Setting menu.
2) Press【P+】/【P-】to make the desired adjustment.
When Enter VChip Menu, Input Correct Password. The
initial password is “1601”,you can set or change your
password by “Change Password” Item, but the
password “1601” is always valid.
Parental Lock
Press【P+】【/ P-】to select the parental lock, press【V+】
/【V-】to cycle the following selections:
Off→Child→Youth→Y. Adult→Custom→
1. Off To turn Parental Lock off
2.Child To allow programs for ages up to 6
3. To allow programs for ages 7 and older
4. Youth Adult To allow programs for ages 14 and
older
5.Custom To set Custom ratings
Change Password
To change your password.
Movie Rating
Press【P+】/【P-】to select these options.
Press【OK】to block or unblock .
Age
G
Description
All Children and General Audience
Parental Guidance Suggested
PG
PG-13
R
Parental Guidance for Children under 13
Restricted viewing, Parental Guidance is Suggested for Children under 17
No one 17 and under allowed
NC-17
X
All the audience
If the current program rating is superior to that of
Vchip setting , the current picture would be blocked.
Meanwhile, this dialogue box(see it right) appears
on the screen, which show the current program
rating.
PAGE 16
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
TV Rating
Block programs by their rating, content or both.
1)Press【P+】/【P-】to select these options.
2)Press【OK】to block or unblock.
Using the PC Setting menu (for PC mode only)
1) Press【MENU】and then use【V+】/【V-】 to select the PC Setting menu.
2) Press【P+】/【P-】to make the desired adjustment. Five modes for you to choose: Auto
Tracking, Clock, Phase, H position, V position.
● Auto Tracking
To adjust automatically the picture’s clock, phase, H
Position andV Position to get the best visual effect.
● Phase
To adjust pictures’ sampling phase in PC mode
● Clock
To adjust pictures’ sampling frequency .
● H Position
To adjust picture’s position horizontally in PC mode.
● V Position
To adjust picture’s position vertically in PC mode.
Note:
In the menu, gray items means invalid to operate in the current mode.
OTHER FUNCTIONS INTRODUCTION
Standby Mode
Press【 】on the TV panel/Remote Control, the LCD TV will store the current setup and
enter into standby mode with a red indicator light. To Power on the LCD TV, press the button
again.
Signal Switch
Press 【AV】on the remote control to select the signal sources orderly. They are TV, AV1,
AV2, YPbPr, PC, and DVI.
The upper-right corner of the screen will display the corresponding information.
Channel Selection
Press 【CH+】 / 【CH-】 on the panel or 【P+】 /【P-】on the remote control to change
the channels. If a channel number is in SKIP ON mode, the next channel will be displayed.
A maximum of three channel numbers can be input at one time on the remote control.
PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Note: The biggest number you can input is 125 or 69 and use number buttons to input your
desired channel number. During this input operation you can change to the
corresponding channel directly with pressing 【OK】, and press【MENU】to cancel.
Volume Control
Press 【V+】/【V-】 to increase or decrease the volume continuously when the main menu
is not displayed on the screen. The range is 0-100.
The Volume menu will automatically be off if there is no operation about 4 seconds.
Mute
Press the【MENU】on the remote control to turn On/Off the MUTE mode. Alternatively, press
【MUTE】, change the volume level to turn the MUTE off.
The
symbol will appear bottom-left corner of the screen the Mute function is
switched on.
The
symbol is hidden when the menu operation is entered, but the feature is still
valid. It appears again when the menu operation is exited. When there is no valid signal
input, the TV will be mute (but no mute symbol) with a blue background.
Sound Mode Selection
Press【S.MODE】to select standard, News, Music, and User modes.
The value of Standard, News, Music modes are the default setting, and they cannot be
adjusted. Only User mode can be altered.
Picture Mode Selection
Press【P.MODE】to Switch among Standard, Mild, Bright and User modes
Information Display
Press 【 DISPLAY 】 to reveal the current signal source and its
corresponding information of Channel Number, Channel label, Color
System, Stereo/FM Mono and signal source of PIP. Characters in green
on the upper-right side display information for the main picture in TV
mode while characters in red displays the source information for the
sub-picture. Press again to exit.
Sleep Function
Press【SLEEP】to select the sleep time between
intervals of 10, 20, 30, 60, 90, 120, 180 minutes
or switch off the SLEEP function. A prompt will
appear when it is one minute from SLEEP. Press
any button to exit.
Recall
Press 【RECALL】to revert to the previous channel in TV mode, or the previous signal
source.
PAGE 18
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Scaler Mode
Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes.
STILL
Press【STILL】to freeze or unfreeze the current image.
Program Scan
Press 【SCAN】to browse TV programs, this function is the same as “Auto scan” in Channel
Setting Menu
Favorite channel
Press 【FAVOR】to select or set your favorite
channels as show in the right picture
You can press【P+】【/ P-】to select the desired Item.
Mode
To select Mode Item, press 【V+】/【V-】to select
Auto or Manual Mode.
(1) In Auto mode, the channel is auto sorted by the
time, if we watch the channel over ten minutes, it will be set in the first position.
(2) In Manual mode, you can press digit keys on the remote control to edit each channel. In
edit status, you may press 【MENU】to exit or press 【OK】to confirm your operation, and
then the channel you edited will be set.
Once you enter into the selected Channel item, the channel will be set
You can press any button of【MENU】,【OK】to exit from the Favorite Menu.
MTS switch
You can press (∞I/II) to select among Mono, Stereo and SAP, in each channel ,Stereo and
SAP mode your selection will be stored.
CCD
Press【CC】to select the caption option，same function to Close Caption item of the menu.
PIP/POP/PBP Function
Press【
】to enter into or exit from the sub-picture mode. In this mode, you can realize
these functions as follows:
1. Press【
】to switch the sub-picture signal source among TV、AV1、AV2、YPbPr、
PC and DVI in cycle.
2. Press【
】to switch the sub-picture mode among PIP、PBP and POP.
● PIP Mode: To overlap a sub-picture (PIP) in small size wherever you want to locate ;
● PBP Mode: To place two pictures in the same size side by side. Both main picture and
sub-picture (PBP) cover half of the display screen area.
● POP Mode: A main picture covers 12/16 of the display screen area while a sub-picture
(POP) covers 1/16.
3. Press【
4. Press【
】to switch between main picture and sub-picture.
】to freeze or continue the current sub-picture .
5. Press【
】to adjust the sub-picture position on display in PIP mode.
PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
Switches of the sub-picture’s channel can be realized by pressing 【CH+】/【CH-】in TV
mode.
The sub-picture can enter into TV mode directly by pressing【CH+】/【CH-】in other modes.
Main Pic
TV
AV1
AV2
YPbPr
PC
DVI
Sub Pic
TV
AV1
AV2
YPbPr
PC
DVI
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Note: All buttons mentioned in this operation are on the remote control, signs of “●” mean
that both pictures can be displayed at the same time and the blanks mean that both modes
can not be displayed at the same time.
PAGE 20
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
TROUBLESHOOTING
Before calling a technician, please check the following table to see if the below mentioned
symptoms can be diagnosed and fixed.
Symptoms
Possible Reasons
Correction
No picture, no
sound, and no
indicator light on
1.The power cord is not plugged in
2.The power is off
1.Plug the power cord in
2.Turn the power on
1.Contrast, sharpness, color and
volume are all in the minimum value or
TV is in mute mode
2.PC has no signal in PC mode
3.The signal cord is not correctly
connected
1. Alter the value of contrast,
sharpness, color and volume
No picture, no
sound, but the green
light indicator
2.Press any button or input PC signal
3.Connect the signal cord correctly
1.Adjust the value of Contrast,
sharpness, and color
2.Set the Color system to the country
broadcasting standard
3.Set the Sound system to the country
broadcasting standard
1.Contrast, sharpness, and color are
set improperly
2.Color system is set improperly
3.Sound system is set improperly
Picture and sound
with abnormity
Picture is spotted or Signal source is low-grade or the signal
with snow cord is in a lower quality
Blue background in No Video signal or the signal cord is
Use the qualified signal cord
Connect the signal cord properly
AV mode
improperly/not connected
Picture is unclear, or
moves or have black
stripes on horizontal
position in PC mode
Adjust automatically by selecting Auto
Adjust or adjust Clock、 Phase、H
Position 、V Position manually after
entering into the PC Setting menu to
solve this problem
Picture is not well adjusted
PC Picture is not in
the middle of the
screen
1.Connect the audio signal cord
properly
No Audio signal or the signal cord is
improperly/not connected
No sound
2.Set the sound system properly
1.Make sure the positive and the
negative polarities are correct.
2.Check if there is a loose contact
between the batteries and the springs
3.Replace the batteries
The remote control
does not work
Batteries are improperly installed or
exhausted
Colors of PC Picture
on display are
improper
The user made the wrong Color Temp
adjustment
Readjust the Color Temperature
PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
SPECIFICATIONS
Model: W260F8U
Items
Specifications
Size (diagonal)
26 inch
1280X768
Recommended Resolution
Dot Pitch
0.4425mm(H) X0.1475mm (V)
LCD
items
panel
Number of Dots
Viewable Area
Color Display
1280XRGBX768
566.4mm(H) x339.84mm (V)
16.7million
Color System
Sound System
NTSC
M
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV Output
VGA/SVGA/XGA/WXGA 60Hz
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
2x5w
One way
Headphone Output
AV (S-Video) Input
YPbPr Input
One way
Two ways (audio is using in community)
One way
One way
One way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
804mm（W）×510mm(H)×294mm(D)
（including the pedestal）
804mm (W) X436mm (H) X106mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
17.5kg（Approx.）
PAGE 22
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
SPECIFICATIONS
Model: W320F8U
Items
Specifications
Size (diagonal)
Resolution
Dot Pitch
31.56 inch
1366X768
0.1703mm(H) X0.5108mm (V)
1366XRGBX768
LCD
items
panel
Number of Dots
Viewable Area
Color Display
697.685mm(H) x392.256mm (V)
16.7million
Color System
Sound System
NTSC
M
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV Output
VGA/SVGA/XGA/WXGA 60Hz
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
2x5w
One way
Headphone Output
AV (S-Video) Input
YPbPr Input
One way
Two ways (audio is using in community)
One way
One way
One way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
954mm（W）×579mm(H)×314mm(D)
（including the pedestal）
954mm (W) X502mm (H) X105mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
21.5kg(Approx.)
PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
W260F8U/W320F8U/W370F8U
SPECIFICATIONS
Model: W370F8U
Items
Specifications
Size (diagonal)
Resolution
Dot Pitch
37.02 inch
1366X768
0.200mm(H) X0.600mm (V)
1366XRGBX768
LCD
items
panel
Number of Dots
Viewable Area
Color Display
819.6mm(H) x460.8mm (V)
16.7million
Color System
Sound System
NTSC
M
PC, DVI Qualified Input Format
YPbPr Input Format
Audio Output Consumption
AV (Video,Y/C) Input
Headphone Output
AV1 (Video, RGB) Input
AV1 (TV-Video)Output
AV2(Video, Y/C) Input
AV2(TV-Video,) Output
YPbPr Input
VGA/SVGA/XGA/WXGA 60Hz
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
2x5w
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
One Way
PC Input
DVI Input
Voltage Input
Please refer to the back label
Rated Power Consumption
Standby Power Consumption
≤2W
1118mm（W）×646mm(H)×334mm(D)
（including the pedestal）
1118mm (W) X587mm (H) X106mm (D)
(Not Including the pedestal)
Unit Dimension
Recommended resolution in PC mode
Unit Weight
1280x768 60Hz
29.5kg (Approx.)
PAGE 24
Download from Www.Somanuals.com. All Manuals Search And Download.
|