User's Manual
CADA-C32A Series
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing Cavalry.
We at Cavalry extend our sincere gratitude for your purchase of this product.
We hope our dedication to delivering high quality products with excellent
customer service will ensure your continued interest in our products.
This manual will assist in the operation of the product. To optimize your
experience with this product, we recommend reading this entire manual
before usage. Please keep this manual for future reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Preface ....................................................................................................
List of Accessories .............................................................................
Product Illustrations ...........................................................................
Features .............................................................................................
Setup Instructions ..............................................................................
RAID ..................................................................................................
Troubleshooting .................................................................................
Warranty and Contact ........................................................................
2
5
6
8
9
13
16
19
4
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Accessories
1.
2.
3.
4.
5.
External power adapter / power cord (look may vary with product)
FireWire 400 cable
3
FireWire 800 cable
USB 2.0 cable
Resources CD
4
2
1
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front
1
1. LED status indicators
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
2. Power switch
3
4
5
2
3. Power jack
4. FireWire 400 port
5. FireWire 800 port (2)
6. USB 2.0 port
7. Ventilation fan
6
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Plug-and-play for Mac OS X and above
USB 2.0 and FireWire 400/800 capability
Pre-formatted in Mac OS X Extended
Supports RAID
Exceptional heat dissipating ability
LED light indicators
Nearly silent operation
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Instructions
Follow the steps below to successfully setup your Cavalry External Hard
Drive with your computer.
Step 1. Start your computer and wait for the Mac OS to load completely.
Step 2. Connect the power adapter to the drive. Then
plug the power adapter into an electrical outlet.
NOTE: Make sure the flat end of the plug is facing
toward the power switch to prevent damage to the pins.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3. Connect the square end of the USB cable to the hard drive. Then
connect the flat end of the USB cable to the USB port on your computer.
USB Cable Plug
USB Port
NOTE: The same procedure applies for FireWire users.
Step 4. Turn the power switch on.
NOTE: Connect the USB cable to the drive before connecting the cable to
the computer. To disconnect, remove the cable from the computer first.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5. Installing drivers for the Cavalry External Hard Drive.
Mac OS X
Plug-and-play. No device drivers or configuration required. The
computer will automatically detect the USB External Hard Drive as a
new USB device and will be ready to use.
Windows 2000/XP/Vista
No drivers required. But reformatting the hard disk is a requirement.
1. Right-click on My Computer and select "Manage".
2. In the left column go under "Storage" and select "Disk
Management".
3. Right-click on the new drive on the bottom and select "Format".
4. Select "NTFS" under "File System". Click OK.
Formatting may take a few minutes to complete.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 98SE/Me
1. Make sure Windows 98SE/Me is fully updated
and click on "Windows 98 Driver". Extract the file.
3. Navigate the device manager.
4. Right-click on the yellow question mark indicating an unknown
external storage device.
5. When the device driver wizard starts, click on the "Browse" button
to select the search directory to find drivers.
6. Find the USB 2.0-98 driver in the extracted file.
7. Click "Next" to continue.
Step 6. Your external hard drive is now ready to use.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RAID
Your product has been preconfigured as RAID 1 (mirrored). "Mirrored"
means that each of the two disks in your disk array contains the same data,
providing protection against one drive failing; however, when the drive
appears on your computer, it will be recognized as a single hard drive.
NOTE: Although the box indicates two hard drives are included, the total
capacity in RAID 1 mode will not equal the sum of the two because the
second drive is used as a "backup" of the first drive. (e.g. two 250GB drives
do not have a 500GB capacity. Instead, only 250GB is available for storage,
while the other 250GB is a backup of that data.)
Please contact us at [email protected] if you would like
to reconfigure the RAID settings on your drive.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
LED light indicator does not turn on
Make sure the power adapter is securely connected to a working electrical
outlet. Secondly, make sure the USB / FireWire cable is inserted correctly
into the hard drive and the computer. Turn on the power switch (page 7).
Computer does not detect hard drive
Make sure the USB / FireWire cables are securely connected. If this does
not work, attach another known working device and working cable into the
USB / FireWire port on the computer. If your computer does not detect your
known working device, the problem could be your computer's USB / FireWire
port. If the port and cable both work, and the hard drive is still not detected,
please contact customer support.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Loud noises coming from external hard drive
In most cases, loud noises coming from the drive suggest it may either be
defective or a part is loose. We apologize for any inconvenience this may
cause. Please contact customer service for assistance.
"HDD1 ERROR" or "HDD2 ERROR" lights appear
This indicates one of the drives may need replacing. If the drive is set up with
RAID1, the hard drive must be replaced by another hard drive of the same
capacity, brand, and model number. Open the enclosure, remove the failed
hard drive and replace with the new drive. After inserting the new drive and
closing the unit, turn it on and the new hard drive will automatically be rebuilt
using a copy of the data from the good hard drive. The unit does not need to
be connected to the computer in order to be rebuilt. Do not turn off the power
during the rebuilding process.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard drive will not work with my PC
This hard drive is formatted for Macs. Format the hard drive according to the
instructions provided in the Setup Instruction section. Alternatively, see the
"Formatting Instructions.pdf" located in the "Contents" folder of the
Resources CD.
If you have more questions, please refer to the Frequently Asked
further inquiries, you may contact Bason/Cavalry tech support at
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
This product comes with a one year warranty from the date of purchase.
activate the warranty. Please have your Serial Number and Model Number
ready. We are not responsible for any loss of data. Please back up your data
often to avoid unexpected losses.
Contact
Cavalry Storage, Inc.
555 E. Easy St.
Simi Valley, CA 93065
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CA1043
061008
Download from Www.Somanuals.com. All Manuals Search And Download.
|