LCD Digital Camera
QV-2400UX/QV-2900UX
User’s Guide
• All example procedures in
this User’s Guide are based
on the QV-2400UX.The same
procedures also apply to the
QV-2900UX, unless
specifically noted otherwise.
• Certain camera models may
not be available in some
geographic areas.
QV-2400UX
English
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Lens .........................................................................E-21
Contents
Changing the Lens Angle
Installing a Conversion Lens
Using a Filter
E-21
E-22
E-23
E-24
E-2 INTRODUCTION
Lens Precautions
Monitor Screen Indicators .......................................E-25
Unpacking ................................................................. E-2
Contents .................................................................... E-3
Quick Reference ....................................................... E-7
REC mode
PLAY mode
Changing the Contents of the Monitor Screen
E-25
E-26
E-27
Operation Indicator Lamp .......................................E-28
Getting Ready
Recording an Image
Playback
E-7
E-8
E-9
REC mode
E-28
PLAY mode
E-29
Deleting Images
E-10
Using the Bundled Accessories ..............................E-30
Using the Lens Cap
Attaching the Strap
Using the Soft Case
E-30
E-30
E-31
Features ..................................................................E-12
Recording Features
E-13
Precautions .............................................................E-15
Power Requirements ..............................................E-32
General Precautions
Operating conditions
Condensation
E-15
E-16
E-16
E-17
Loading Batteries
E-32
E-35
E-35
E-36
E-37
E-37
Battery Handling Precautions
Low Battery Indicator
Using AC Power
Turning the Camera On and Off
Power Save Settings
About the camera’s backlight…
E-18 GETTING ACQUAINTED
Memory Cards .........................................................E-39
General Guide .........................................................E-18
Inserting a Memory Card into the Camera
Removing a Memory Card from the Camera
Formatting a Memory Card
E-39
E-40
E-41
E-42
E-42
Front
E-18
E-19
E-20
E-20
Back
Terminals and Ports
Bottom
Memory Card Precautions
IBM Microdrive Precautions
Menu Screens .........................................................E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
E-3
INTRODUCTION
Setting the Current Date and Time .........................E-45
E-64 OTHER RECORDING FUNCTIONS
Setting the Date and Time
Selecting the Date Format
Time Stamp
E-45
E-46
E-47
Shooting Portraits ...................................................E-64
Shooting Landscapes .............................................E-65
Shooting Night Scenes ...........................................E-66
E-48 BASIC IMAGE RECORDING
Instant Setup Using the Best Shot Mode ...............E-67
Specifying the Location of Best Shot Mode
Recording a Simple Snapshot ................................E-48
Scene Images
E-69
E-70
About the REC Mode Monitor Screen
About Auto Focus
Recording Precautions
Image Recording when the Battery is Low
E-50
E-50
E-50
E-51
Registering Your Own Scene Setups
Importing a Scene from the Best Shot Library
on the CD-ROM
E-71
Recording a Movie ..................................................E-73
Using Zoom .............................................................E-51
To record a movie using the normal mode
E-73
Using Optical Zoom
E-51
To record a movie using the past mode
E-74
Using Digital Zoom
E-52
Shooting Panoramas ..............................................E-75
Shooting at Fixed Intervals .....................................E-76
Using the Flash .......................................................E-53
Flash Status Indicators
Adjusting the Flash Intensity
Precautions when Using Flash
E-54
E-54
E-55
Canceling an Interval Mode Timer Operation
E-78
Specifying the Exposure Mode ...............................E-78
Selecting the Focus Mode ......................................E-56
Program AE
E-78
E-79
E-80
E-82
E-83
Using the Auto Focus Mode
Using the Macro Mode
Using the Infinity Mode
Using the Manual Focus Mode
Using Focus Lock
E-56
E-57
E-58
E-58
E-59
Aperture Priority AE
Shutter Speed Priority AE
Manual Exposure
Quick Exposure Mode Selection
Selecting the Metering Mode ..................................E-84
Specifying Image Size and Quality .........................E-60
Using the Self-timer ................................................E-61
Exposure Compensation.........................................E-62
Quick Metering Mode Selection
E-85
Setting the Sensitivity Level ....................................E-85
Using the Filter Function .........................................E-86
Download from Www.Somanuals.com. All Manuals Search And Download.
E-4
INTRODUCTION
Selecting White Balance .........................................E-87 Displaying the 9-image View ................................E-103
Adjusting White Balance Manually
E-87
Selecting a Specific Image in the 9-image View
E-104
Quick White Balance Selection
E-88
Displaying the Histogram ......................................E-105
Using the Slide Show Feature ..............................E-106
Resizing an Image ................................................E-107
Cropping an Image................................................E-108
Enhancing Certain Colors .......................................E-89
Turning the On-screen Grid On and Off .................E-90
Specifying Outline Sharpness ................................E-91
Specifying Color Saturation ....................................E-91
Specifying Contrast .................................................E-92
Saving Uncompressed Images (TIFF Mode) .........E-92
Specifying Power On Default Settings ...................E-93
E-110 DELETING IMAGES
Deleting the Displayed Image ............................... E-110
Deleting Selected Images ..................................... E-111
Deleting All Images in Selected Folders ............... E-112
Deleting All Unprotected Images .......................... E-113
Resetting the Camera
E-94
Using the Camera’s Shortcut Features ..................E-95
Changing REC mode FUNCTION Menu Settings
Using the Shortcut Buttons
To assign REC mode FUNCTION menu items
to shortcut buttons
Directly Accessing the REC mode FUNCTION Menu E-98
Cycling through REC mode FUNCTION Menu Settings E-98
E-95
E-96
E-114 MANAGING IMAGES
Folders and Files................................................... E-114
Folders
E-114
Files
E-115
E-99 PLAYBACK
Selecting a Folder for Playback ............................ E-116
Protecting Images Against Deletion ..................... E-116
Basic Playback Operation.......................................E-99
Playing a Movie .....................................................E-100
Playing a Panorama ..............................................E-101
Enlarging the Playback Image ..............................E-102
Protecting Selected Images
E-116
Protecting and Unprotecting All Images
in Selected Folders
Protecting and Unprotecting All Images
E-117
E-118
Download from Www.Somanuals.com. All Manuals Search And Download.
E-5
INTRODUCTION
DPOF..................................................................... E-119 Using a Memory Card to Transfer Image Data ....E-135
Making DPOF Settings for Particular Images
Making DPOF Settings for Particular Folders
Making DPOF Settings of All Images
on the Memory Card
E-119
E-120
Memory Card Data
DCF Protocol
Memory Card File Structure
Image Files Supported by the Camera
Precautions when Using a Memory Card
on a Computer
E-136
E-136
E-137
E-138
E-121
PRINT Image Matching.........................................E-122
E-139
Using the HTML Card Browser .............................E-140
E-123 OTHER SETTINGS
Specifying the Card Browser Type
Viewing Card Browser File Contents
Saving Card Browser Files
E-140
E-142
E-145
Turning the Monitor Screen Indicators On and Off... E-123
Changing the Display Language ..........................E-124
Turning the Confirmation Beep On and Off .......... E-125
E-146 REFERENCE
Camera Menus ......................................................E-146
E-126 CONNECTING TO EXTERNAL EQUIPMENT
REC mode
E-146
PLAY mode
E-147
Connecting to a Television ....................................E-127
Mode Settings .......................................................E-148
Selecting the Video Output Signal Mode
E-128
Settings in Each Mode
E-148
Connecting the Wired Remote Controller
Recording Mode + Exposure Mode Combinations E-149
to the Camera .......................................................E-129
Troubleshooting.....................................................E-150
Messages
E-153
Connecting an External Flash Unit
(QV-2900UX Only) ................................................ E-129
Specifications ........................................................E-155
External Flash Unit Requirements
E-129
Attaching an External Flash Unit
E-130
Connecting to a Computer ....................................E-132
USB Port Connection (Windows, Macintosh)
E-133
Using a Serial Port Connection
E-134
Download from Www.Somanuals.com. All Manuals Search And Download.
E-6
INTRODUCTION
Quick Reference
Getting Ready
1
2
(page E-32)
(page E-39)
Load batteries.
Insert the memory card.
1
2
3
1
2
3
PUSH
3
(page E-45)
Set the current time and date.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-7
INTRODUCTION
Recording an Image (page E-48)
4
Point the camera at the subject, compose
the image on the monitor screen, and
press the shutter release button half way
to focus the image.
5
Press the shutter release
button all the way down
to record the image.
1
PO
WER
Remove the lens
cap from the lens.
ON/OFF
W
T
REC
PLA
Y
3
SHIFT
INFO
2
Slide the REC/PLAY
selector to “REC”.
MF
RESIZE
Slide the POWER ON/OFF
switch to the right to turn
on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-8
INTRODUCTION
Playback (page E-99)
3
Use [+] (forward) and [–] (back)
to scroll through stored images
on the monitor screen.
PO
WER
ON/OFF
W
T
REC
C
PLA
Y
1
2
SHIFT
INFO
Slide the REC/PLAY
selector to “PLAY”.
Slide the POWER
ON/OFF switch to
the right to turn on
the camera.
MF
RESIZE
Download from Www.Somanuals.com. All Manuals Search And Download.
E-9
INTRODUCTION
Deleting Images (page E-110)
3
Use [+] (forward) and [–]
(back) to scroll through
6
Use [+] and [–] to move the
stored images and display
the one you want to delete.
cursor to “Yes” and then
press the shutter release
button to delete the image
you selected.
1
Slide the POWER
ON/OFF switch to
the right to turn
on the camera.
PO
WER
ON/OFF
W
T
2
REC
Slide the REC/PLAY
selector to “PLAY”.
5
Double check to make
sure you really want to
delete the image you
CARD
PLA
Y
SHIFT
INFO
MF
RESIZE
selected.
• You can exit the image delete
operation by pressing MENU.
4
Press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-10
INTRODUCTION
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss resulting from the use of this
manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any loss or claims by third parties which may arise
through the use of the QV-2400UX or the QV-2900UX.
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss caused by deletion of data as a
result of malfunction, repairs, or battery replacement. Be
sure to back up all important data on other media to protect
against its loss.
• Windows and Internet Explorer are registered trademarks
of Microsoft Corporation.
• Macintosh is a registered trademark of Apple Computer,
Inc.
• CompactFlashTM and
SanDisk Corporation.
logo are registered trademarks of
• The USB driver uses software by Phoenix Technologies
Ltd.,
Compatibility Software Copyright C 1997
Phoenix Technologies Ltd., All Rights Reserved.
• IBM is a registered trademarks of International Business
Machines Corporation.
• Other company, product and service names used herein
may also be trademarks or service marks of others.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-11
INTRODUCTION
• VIDEO OUT terminal
Features
Connect to your TV for big-screen viewing of images.
• High-resolution 2.11-megapixel CCD
• 1.8-inch low-glare color LCD (HAST)
• USB compatibility
Connect to your computer for quick and easy image ex-
changed.
• 12X zoom: 3X optical zoom, 4X digital zoom (QV-2400UX)
32X zoom: 8X optical zoom, 4X digital zoom (QV-2900UX)
• HTML File Card Browser
Images are displayed on your computer screen in a convenient
format.
You can view a gallery of image thumbnails on your computer
screen.
• Swivel lens mechanism
Shoot from the angle you want without moving the camera
body.
• External flash connectability (QV-2900UX only)
• Memory card image storage
Supports CompactFlash cards (CF TYPE I/II) and the IBM
microdrive.
• Digital Print Order Format (DPOF)
Images can be printed easily in the sequence you want using a
DPOF compatible printer. DPOF can also be used when speci-
fying images and quantities for printing by professional print
services.
• DCF Data Storage
• Image management and manipulation software
DCF (Design rule for Camera File system) data storage proto-
col provides image inter-compatibility between the digital cam-
era and printers.
The QV-2400UX or the QV-2900UX comes bundled with a CD-
ROM disc that’s packed with useful software. Photo Loader au-
tomates uploading of images to your computer, and Panorama
Editor lets you stitch images together into panorama scenes.
Other bundled applications include Internet Explorer (Web
browser), Outlook Express (e-mail software), and QuickTime
(movie viewer). You also get a copy of the Adobe Acrobat
Reader PDF file reader for reading the user documentation on
the CD-ROM disc.
• PRINT Image Matching support
Images include PRINT Image Matching data (mode setting and
other camera setup information). A printer that supports PRINT
Image Matching reads this data and adjusts the printed image
accordingly, so your images come out just the way you in-
tended when you recorded them.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-12
INTRODUCTION
Recording Features
Portrait Mode
Best Shot Mode
page E-64
page E-65
page E-66
page E-67
page E-73
page E-75
Landscape Mode
Movie Mode
Night Scene Mode
Panorama Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
E-13
INTRODUCTION
Histogram
Interval Mode
page E-76
page E-105
Four exposure modes
Program AE, aperture priority AE, shutter speed priority
AE, manual exposure
pages E-78 to E-83
Three metering modes
Multi-pattern, center weighted, spot
pages E-84
Four focus modes
Auto focus, macro, infinity, manual
pages E-56 to E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
E-14
INTRODUCTION
• Should foreign matter or water ever get into the camera,
Precautions
immediately turn power off, unplug the AC adaptor from the
power outlet, and contact your dealer or nearest CASIO
service provider. Using the camera under these conditions
creates the danger of fire and electrical shock.
General Precautions
Be sure to observe the following important precautions
whenever using the QV-2400UX or the QV-2900UX.
• Should you ever notice smoke or a strange odor coming out
of the camera, immediately turn power off and unplug the
AC adaptor from the power outlet. Using the camera under
these conditions creates the danger of fire and electrical
shock. After making sure there is no more smoke coming
from the camera, take it to your nearest CASIO service pro-
vider for repair. Never attempt your own maintenance.
• At least once a year, unplug the AC adaptor from the power
outlet and clean the area around the prongs of the plug.
Dust build up around the prongs can create the danger of
fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn power off, unplug the AC adaptor from the
power outlet, and contact your nearest CASIO service pro-
vider.
• Never use the camera inside of an air craft or in any other
areas where its use is prohibited. Doing so can result in an
accident.
• Physical damage and malfunction of this camera can
cause the image data stored in its memory to be deleted.
Be sure to always keep backup copies of data by transfer-
ring them to personal computer memory.
All references in this manual to “this camera” and “the cam-
era” refer to the CASIO QV-2400UX or QV-2900UX Digital
Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so cre-
ates the danger of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electrical shock when exposed. Always leave main-
tenance and repair work up to authorized CASIO service
providers.
• Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vi-
sion and create the danger of accident.
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage if
it is fired too close to the eyes, especially with young chil-
dren. When using the flash, the camera should be at least
one meter from the eyes of the subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the danger of fire and
electrical shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-15
INTRODUCTION
• Never open the battery compartment cover, disconnect the
Condensation
AC adaptor from the camera or unplug it from the wall
socket while recording images. Doing so will not only make
storage of the current image impossible, it can also corrupt
other image data already stored in camera memory.
• When you bring the camera indoors on a cold day or other-
wise expose it to a sudden change of temperature, there is
the possibility that condensation can form on the exterior or
on interior components. Condensation can cause malfunc-
tion of the camera, so you should avoid exposing it to con-
ditions that might cause condensation.
• To keep condensation from forming, place the camera into
a plastic bag before moving it into a location that is much
warmer or colder than your current location. Leave it in the
plastic bag until the air inside the bag has a chance to
reach the same temperature as the new location. If con-
densation does form, remove the batteries from the cam-
era and leave the battery compartment cover open for a
few hours.
Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C.
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject to
temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
Download from Www.Somanuals.com. All Manuals Search And Download.
E-16
INTRODUCTION
About the camera’s backlight…
• The camera is equipped with a fluorescent light source to
provide the back lighting for its LCD.
• The normal service life of the backlight is approximately six
years, when the camera is used for about two hours a day.
• Should the LCD image appear abnormally dark, take the
camera to your dealer or an authorized CASIO service pro-
vider to have the light source replaced. Note that you will
be charged for this replacement.
•
Under very cold conditions, the backlight may require more
time than normal to light, or reddish bands may appear in
the displayed image. These conditions do not indicate mal-
function, and normal operation should return at higher tem-
peratures.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-17
GETTING ACQUAINTED
This section contains important information you should know when trying to operate the camera.
General Guide
The following illustrations show the names of each component, button, and switch on the camera.
Front
MENU button
(page E-44)
Terminal panel cover
(page E-20)
[+] / [–] buttons
(page E-44)
Flash
(page E-53)
Shutter release
button
(page E-44, 48)
Exposure
sensor
(page E-55)
Lens
(page E-21)
QV-2900UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-18
GETTING ACQUAINTED
POWER ON/OFF switch
(page E-37)
Back
Zoom slider
(pages E-51, 102, 103)
Monitor screen
(page E-25)
REC/PLAY selector
(page E-48)
Operation lamp
(page E-28)
PO
WER
ON/OFF
Memory card slot cover
(page E-39)
W
T
External flash
sync terminal
(pages E-126, 130)
REC
(Self-Timer/Delete)
button (pages E-61, 111)
CARD
PLA
Y
SHIFT
INFO
MF
RESIZE
/
/MF RESIZE
(Focus/Resize)
button (pages E-56, 107)
Terminal cap
SHIFT INFO (Shift/
Information) button
(pages E-26, 95)
(page E-130)
(Flash/Folder) button
(pages E-53, 116)
QV-2900UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-19
GETTING ACQUAINTED
Terminals and Ports
Bottom
Terminal Panel
Cover (page E-20)
Release button
(page E-32)
VIDEO OUT terminal
Tripod screw hole
(page E-126)
DIGITAL terminal
(page E-126)
W
T
O N / O F F
W E P R O
PUSH
OPEN
USB VIDEO OUT DIGITAL
DC IN 6V
Battery compart-
ment cover
(page E-32)
DC IN 6V terminal
(page E-36)
USB port
(page E-126)
Open Terminal Panel Cover
Download from Www.Somanuals.com. All Manuals Search And Download.
E-20
GETTING ACQUAINTED
Lens
A
The swivel lens mechanism lets you easily aim at the angle
you want, without changing the position of the camera body.
Changing the Lens Angle
B
A ....Image displayed
when recording
B ....Display of
recorded image
IMPORTANT!
• Do not use undue force when rotating the lens mecha-
nism and never try to force it past the point where rota-
tion stops naturally. Rough handling can cause the
lens mechanism to break and other damage to the
camera.
• The proper orientation of the lens when you store the
camera in its case depends on your camera model.
* QV-2400UX: Lens should be pointed forward.
• Whenever you swivel the lens so it is pointing in the direc-
tion of the back of the camera, the image on the monitor
screen is automatically adjusted so it shows a mirror image
of what it picked up by the lens. This makes self-portrait
images appear with the correct orientation when viewed on
a display.
* QV-2900UX: Lens should be pointed up.
• Never set the camera down while the lens is pointed
downwards. Doing so can cause bending or other
damage to the area around the lens.
• Always leave the lens cap on the lens except when
you are actually recording images.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-21
GETTING ACQUAINTED
• Wide Conversion Lens LU-8W: 0.7X
Installing a Conversion Lens
• Focusing distance when installed
QV-2400UX/QV-2900UX: Approximately 1cm to ∞
Optionally available conversion lenses change the focal dis-
tance, which provides enhanced telephoto or wide-angle ca-
pabilities. The method you should use to install a conversion
lens depends on your camera model.
• QV-2400UX: You must install an optionally available lens
adaptor (LU-8A) in order to use a conversion lens.
• QV-2900UX: A conversion lens can be installed directly,
without an adaptor.
Wide
Conversion
Lens (LU-8W)
Conversion
Lens Adaptor
(LU-8A)
• Tele Conversion Lens LU-8T: 1.5X
• Focusing distance when installed
QV-2400UX: Approximately 1m to ∞
QV-2900UX: Approximately 2.5m to ∞
Tele
Conversion
Lens (LU-8T)
QV-2400UX
QV-2900UX
IMPORTANT!
• Be sure to use the Conversion Lens Adaptor when-
ever you install a conversion lens. If you don’t, the
lens will come into contact with the conversion lens
when it extends from the camera, resulting in malfunc-
tion. (QV-2400UX only)
Conversion
Lens Adaptor
(LU-8A)
• Flash is disabled while a conversion lens is being
used.
QV-2400UX
QV-2900UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-22
GETTING ACQUAINTED
• Setting the camera to wide-angle zoom while the Tele
Using a Filter
Conversion Lens causes shadows around the periph-
ery of the image. This is because the frame of the at-
tached lens blocks some of the light coming into the
lens. Because of this, you should always use tele-
photo zoom whenever you are using the Tele Conver-
sion Lens.
• The effects of camera movement are magnified while
the Tele Conversion Lens is being used. Whenever
you are using a conversion lens, install the cushion
that comes with it and mount the camera on a tripod
so it is secure.
The lenses of both camera models are threaded.
With the QV-2400UX, you can screw on an optionally avail-
able Conversion Lens Adapter (LU-8A) and then attach a
commercially available lens filter.
With the QV-2900UX, you can screw a commercially avail-
able lens filter directly to the lens, without using the Conver-
sion Lens Adapter.
IMPORTANT!
• When using a lens filter with the QV-2400UX, be sure
you first screw the optionally available Conversion
Lens Adapter onto the lens. A filter attached directly to
the lens of the QV-2400UX will come into contact with
the convex surface of the lens and damage it.
• The designs of some filters can cause shadows
around the periphery of the image.
• Auto focus and flash may not produce desired results
while a filter is on the lens.
• Filters do not produce exactly the same results as
those obtained with a film-based camera.
• Due to certain characteristics of the Wide Conversion
Lens, you may notice some slight distortion in images
recorded with it installed.
• Make sure that
(Macro Mode) is selected as the
focus mode whenever you are using the Wide Conver-
sion Lens.
• Note that optical zoom is restricted as shown below in
the Macro Mode
.
* QV-2400UX: 1X fixed (QV-2400UX)
* QV-2900UX: 1X to 1.6X (QV-2900UX)
• Do not use multiple filters in combination.
• Use of the flash while a commercially available lens
hood is installed may not produce desired results.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-23
GETTING ACQUAINTED
Lens Precautions
• Fingerprints, dust, or any other soiling of the lens can inter-
fere with proper image recording. Never touch the lens with
your fingers. You can remove dust particles from the lens
surface by using a lens blower to blow them off. Next, wipe
the surface of the lens with a soft lens cloth.
• The lens of the QV-2400UX extends from its body when
you turn on power and retracts when you turn off power.
Take care not to subject the lens to undue force or impact,
and never set the camera face down so the lens is in con-
tact with a tabletop, etc. Be sure to remove the lens cap
before turning on the camera. If you turn on the QV-
2400UX while the REC/PLAY selector is set to “REC” and
its lens cap is attached, the message “LENS CAP!” ap-
pears on the monitor screen and power turns off automati-
cally. If this happens, remove the lens cap and then turn on
power.
• Never remove the batteries from the QV-2400UX or unplug
its AC adaptor while the lens is extended. Doing so leaves
the lens extended, and creates the risk of lens damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-24
GETTING ACQUAINTED
Monitor Screen Indicators
The following describes the different indicators and markings that appear on the camera’s monitor screen.
REC mode
Focus Mode indicator
None Auto Focus
Macro
Self-timer
10 SEC, 2 SEC
Recording Mode indicator
NORMAL
Zoom factor
Memory capacity
Infinity
PORTRAIT
LANDSCAPE
NIGHT SCENE
BEST SHOT
Manual Focus
(Remaining number of
storable images)
Flash Mode indicator
None Auto
MOVIE
Image size
1600 x 1200 pixels
800 x 600 pixels
MOVIE (PAST)
Spot metering
indicator
Flash Off
PANORAMA
INTERVAL
Flash On
Quality
Red-eye reduction
FINE, NORMAL, ECONOMY, TIFF
•
Flash indicator indicates
that the flash will fire
(when auto flash is
selected).
Camera shake
indicator
Image information
Movie Recording: recording time
........... seconds
Panorama: number of images
........... P1 to P10
Aperture value
Battery capacity
Shutter speed value
Date and time
This information appears for one or
two seconds, and then disappears.
•
An out of range
aperture or shutter
speed causes the
corresponding monitor
screen value to turn
yellow.
EV value
Auto Focus frame
•
•
Focusing complete: Green
Focusing failed: Red
The recording mode, memory capacity, image size, quality, and battery
capacity indicators do not appear on the REC mode monitor screen when
the “Indicators” option is turned off (page E-123).
No memory card loaded
warning
Download from Www.Somanuals.com. All Manuals Search And Download.
E-25
GETTING ACQUAINTED
I Screen when SHIFT INFO is pressed
PLAY mode
Pressing SHIFT INFO also
SHIFT
INFO
MF
RESIZE
displays the FUNCTION menu
(page E-95).
Folder name
Image protection indicator
File number
SHIFT INFO button
Metering Mode indicator
(multi)
(center)
(spot)
Image size
Quality
Date/Time
Battery
capacity
White balance
(Auto)
The above indicators do not appear on the PLAY mode
monitor screen when the “Indicators” option is turned off
(page E-123).
(Daylight)
(Shade)
Exposure Mode indicator
(program AE)
(Tungsten)
(Fluorescent)
(Manual)
(aperture priority AE)
(shutter speed priority AE)
(manual)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-26
GETTING ACQUAINTED
I Screen when SHIFT INFO is pressed
White balance Flash Mode indicator
Changing the Contents of the Monitor Screen
Each press of the SET/DISP button changes the contents of
the monitor screen as shown below.
REC mode
Display indicators on (page E-25)
SET/DISP
SET/DISP
Aperture
value
Folder name
File number
FUNCTION menu on (page E-26)
Shutter
speed
value
PLAY mode
Metering Mode
indicator
Display indicators on (page E-26)
Exposure Mode
SET/DISP
indicator
PLAY Mode details on (page E-26)
SET/DISP
SET/DISP
Recording Mode
indicator
Histogram display on (page E-105)
IMPORTANT!
• The above indicators may not appear when viewing
images recorded using a different digital camera
model.
IMPORTANT!
• The histogram does not appear for movie images.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-27
GETTING ACQUAINTED
REC mode
Operation Indicator Lamp
Lamp
Color
The Operation lamp shows the operational status of the
camera as described below.
On
Flashing
Please Wait
Green
Auto focus operation
complete
(after power on)
Monitor screen
turned off due to
sleep state activation
Image store operation in
progress
SHIFT
INFO
MF
RESIZE
Movie store operation in
progress
Self-timer countdown in
progress
Operation lamp
Low battery
Format operation in
progress
Please Wait
(after power off)
Amber
Red
Exposure warning
Cannot focus
Memory full
Flash is charging.
Memory card error
Memory card is not
formatted
Data save error
Cannot charge the flash
• The camera is ready to record when the lamp is off.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-28
GETTING ACQUAINTED
PLAY mode
Lamp
Color
On
Flashing
Green
–
Please Wait
(after power on)
Delete operation in
progress
Image protection
operation in progress
Making DPOF settings
Low battery
Format operation in
progress
Please Wait
(after power off)
Red
–
Memory card error
Memory card is not
formatted
No memory card in the
camera
Download from Www.Somanuals.com. All Manuals Search And Download.
E-29
GETTING ACQUAINTED
Attaching the Strap
Using the Bundled Accessories
Attach the strap as shown in the illustration below.
Using the Lens Cap
Always keep the lens cap on the lens whenever you are not
using the camera.
Large loop
Small loop
IMPORTANT!
Ring
• Be sure to keep the strap around your wrist when us-
ing the camera to protect against accidentally drop-
ping it.
Cap holder
• The supplied strap is intended for use with this camera
only. Do not use it for any other application.
• Never swing the camera around by the strap.
Attach the lens cap holder to the ring. This protects against
accidental loss of the lens cap.
I QV-2400UX Users
• Be sure to turn off camera power and let the lens retract
into the camera before attaching the lens cap.
• Never turn on camera power with the lens cap affixed to the
lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-30
GETTING ACQUAINTED
Using the Soft Case
Keep the camera in its soft case to protect it when not in use.
I QV-2400UX
A pocket is provided inside the case
for memory card storage. To insert a
memory card, open the flap of the
pocket and slide the card into it.
Flap
Monitor screen
facing down
IMPORTANT!
• Never put any other objects besides the camera into
the soft case.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-31
GETTING ACQUAINTED
1. While holding down the re-
Power Requirements
lease button on the battery
compartment cover (on the
bottom of the camera),
slide the cover in the direc-
tion indicated by the arrow
in the nearby illustration
and open the cover.
PUSH
Your camera features a two-way power supply that lets you
use either AA-size batteries or household AC current.
A set of AA-size alkaline batteries is supplied with the cam-
era. The other items listed below are available separately.
I Batteries
• Four AA-size alkaline batteries: LR6
• Four AA-size lithium batteries: FR6
• Four AA-size nickel metal hydride rechargeable batteries:
NP-H3
2. Load batteries with their
+/- ends facing as
shown in the nearby
illustration.
I Household Current
• AC Adaptor: AD-C620
• AC Adaptor/Charger: BC-3HA
Loading Batteries
Make sure that camera power is turned off whenever loading
or replacing batteries.
3. While holding down the
release button, slide the
battery compartment
cover back to its original
position to close it.
IMPORTANT!
• Never use manganese batteries. Use only the battery
types specifically mentioned in this User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-32
GETTING ACQUAINTED
I Battery Life Guidelines
Recording one image per minute under the above conditions
reduces battery life to about one sixth of that noted above.
Battery life is greatly affected by how much you use flash,
zoom and other functions, and how long you leave power
turned on.
The battery life guideline values given below indicate the
amount of time at standard temperature (25°C) until power
automatically turns off due to battery failure. They do not
guarantee that batteries will provide the amount of service
indicated. Low temperatures and continued use reduce bat-
tery life.
I Tips for Prolonging Battery Life
• Use the
using it.
button to turn off the flash when you are not
Type of
Operation
AA-size Alkaline AA-size Lithium AA-size Ni-MH
Batteries LR6
Batteries FR6
Batteries NP-H3
• You can also use the power save settings (page E-37) to
protect against wasting battery power when you forget to
turn off the camera.
Continuous
Playback
170 minutes
300 minutes
180 minutes
Continuous
Recording
80 minutes
(480 shots)
200 minutes
(1200 shots)
120 minutes
(720 shots)
IIAlkaline Battery Life
The actual life of alkaline batteries is affected by a variety of
factors, including the battery manufacturer, the amount of
time the batteries spend in storage before you use them,
temperature while you are recording, and photographic con-
ditions. As a rule, we recommend the use of lithium batteries
or Ni-MH batteries, which have longer lives than alkaline bat-
teries.
• The above figures are approximations only.
• The above guidelines are based on the following battery
types:
Alkaline: MX1500 (AA) DURACELL ULTRA
Lithium: Energizer
* Battery life varies with brand.
• Figures are based on continuous recording under the fol-
lowing conditions.
Flash turned off
One zoom slider switching between T (Telephoto) and W
(Wide-angle)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-33
GETTING ACQUAINTED
The following examples show how alkaline battery life
changes under different conditions.
I About rechargeable batteries
Use only the nickel-metal hydride batteries (NP-H3) that are
available from your dealer as options for this camera. Proper
camera operation is not guaranteed when other recharge-
able batteries are used.
photographic conditions
shooting conditions
Example 1: Intermittent use of the camera shortens battery
life.
AC Adaptor/Charger : BC-3HA
Nickel-metal hydride batteries (4-battery set)/Quick
Charger Set : BC-1HB4
Nickel-metal hydride batteries (4-battery set) : NP-H3P4
Conditions
• Temperature: 25°C
• Repeat of a cycle of recording of one shot per minute
for 10 minutes, followed by one minute of playback,
and a nine minutes of power off (power on, full lens
extention, half lens contraction, full lens extension,
image recording, power off)
IMPORTANT!
• Be sure to keep all four batteries together as a set at
all times, for both charging and powering the camera.
Mixing batteries from different sets can shorten overall
battery life and cause malfunction of the camera.
• Rechargeable batteries cannot be charged while they
are loaded in the camera.
• Flash on
Approximate Battery Life: 50 minutes (46 shots)
Example 2: Low temperatures shorten battery life.
Conditions
• Temperature: 0°C
• Repeat of a cycle of recording of one shot per minute
for 10 minutes, followed by one minute of playback,
and a nine minutes of power off (power on, full lens
extention, half lens contraction, full lens extension,
image recording, power off)
• Flash on
Approximate Battery Life: 12 minutes (11 shots)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-34
GETTING ACQUAINTED
• Dead batteries are susceptible to leakage, which can
Battery Handling Precautions
cause serious damage to your camera. Remove batteries
from the camera as soon as you notice they are dead.
• The batteries that power the camera normally become
warm as they discharge.
Incorrect use or handling of batteries can cause them to leak
or burst and create the danger of serious damage to your
camera. Be sure to note the following important precautions
to avoid problems with batteries.
• Use only LR6 (AM-3) type alkaline or FR6 type
lithium or Ni-MH (nickel-metal hydride) dry cell
batteries with this camera. Never mix old bat-
teries with new ones. Doing so can result in
bursting or leaking of batteries, creating the
danger of fire or personal injury.
Low Battery Indicator
The following shows how the battery capacity indicator on
the monitor screen and the indicator display changes as bat-
tery power is used. Replace all four batteries as soon as pos-
sible after they go dead. If you continue to use the camera
CAUTION
• Always make sure that the plus (+) and minus
while the battery level is
matically turn off.
or
, camera power will auto-
(–) ends of the batteries are facing correctly, as
noted by the markings on the camera itself.
Improper loading of batteries can result in
bursting or leaking of batteries, creating the
danger of personal injury or soiling of objects
nearby.
Battery
High
Low
Capacity
Monitor
Screen
• Remove batteries from the camera if you do not plan to use
it for more than two weeks.
• Never recharge batteries, never allow direct connection
between two ends of a battery, and never try to take batter-
ies apart.
• Do not expose batteries to direct heat or dispose of them
by burning. Doing so can create the danger of explosion.
• Never mix batteries of different types.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-35
GETTING ACQUAINTED
AC Adaptor precautions
Using AC Power
• Never use an electrical outlet whose voltage is
outside the rating marked on the AC adaptor.
Doing so can create the danger of fire or elec-
trical shock. Use only the optional AC adaptor
specified for this camera.
Use the adaptor as shown below to power the camera from a
household power outlet.
DC IN 6V
(AC power terminal)
• Do not allow the AC adaptor power cord to be-
come cut or damaged, do not place heavy ob-
jects on it, and keep it away from heat. A dam-
aged power cord creates the risk of fire and
electrical shock.
AC Adaptor
• Never try to modify the AC adaptor power cord,
or subject it to severe bending, twisting, or pull-
ing. Doing so creates the risk of fire and elec-
trical shock.
CAUTION
• Never touch the AC adaptor while your hands
are wet. Doing so creates the risk of electrical
shock.
• AC Adaptor: AD-C620 (Option)
• Do not overload extension cords or wall out-
lets. Doing so creates the danger of fire and
electrical shock.
• Should the cord of the AC adaptor become
damaged (exposed internal wiring), request a
replacement from an authorized CASIO ser-
vice provider. A damaged AC adaptor cord
creates the danger of fire or electrical shock.
• AC Adaptor/Charger: BC-3HA (Option)
The BC-3HA functions both as an AC adaptor and as a
charger unit for AA-size nickel metal hydride batteries. It
comes complete with four rechargeable nickel metal hy-
dride batteries. This AC adaptor/charger unit can be used
with any household power outlet rated for 100V to 240V
AC.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-36
GETTING ACQUAINTED
• Be sure to turn off power before connecting or disconnect-
ing the adaptor.
Turning the Camera On and Off
Sliding the POWER ON/OFF switch
• Always turn camera power off before disconnecting the AC
adaptor, even if the camera has batteries installed. If you
don’t, the camera will turn off automatically when you dis-
connect the AC adaptor. You also run the risk of damaging
the camera whenever you disconnect the AC adaptor with-
out first turning power off.
to the right toggles camera power on
POWER
ON/OFF
and off.
POWER ON/OFF
• The AC adaptor may become warm to the touch after ex-
tended periods of use. This is normal and is not cause for
alarm.
• After using the camera, turn it off and unplug the adaptor
from the AC outlet.
• The camera automatically switches over to AC adaptor
powered operation whenever the AC adaptor is plugged
into the camera.
Power Save Settings
The settings described below let you specify sleep and auto
power off trigger times that help to conserve valuable battery
power.
AUTO POWER OFF
Auto Power Off turns off camera power if no operation is
performed for five minutes in the PLAY mode. In the REC
mode, you can specify an Auto Power Off trigger time of
two or five minutes.
• Always use the AC adaptor to power the camera whenever
it is connected to a computer.
SLEEP
The monitor screen enters a sleep state if no operation is
performed for a specified amount of time in the REC mode.
Pressing any button immediately wakes up the monitor and
restores normal operation. You can specify 30 seconds, 1
minute, or 2 minutes before the sleep state is triggered, or
you can turn off this setting entirely.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-37
GETTING ACQUAINTED
• In the PLAY mode, Auto Power Off trigger time is fixed
To power save settings
at five minutes.
• Sleep is disabled in the PLAY mode.
1. Turn on the camera and slide the REC/PLAY
selector to “REC”.
• Performing any button operation while the monitor is
asleep immediately wakes it up and restores normal
operation.
2. Press MENU.
• The Auto Power Off setting is given priority if you have
“2 min” set for both Sleep and Auto Power Off. This
means that the camera turns off if you do not perform
any operation for about two minutes in the REC mode.
3. Use [+] (down) and [–] (up) to select “FUNC-
TION”, and then press the shutter release but-
ton.
• Auto Power Off is automatically disabled when under
any one of the following conditions.
4. Use [+] (down) and [–] (up) to select the item
whose settings you want to change, and then
press the shutter release button.
— While a slideshow is playing
— When you are performing operations on a com-
puter, printer, or other external device connected
to the camera’s DIGITAL terminal or USB port.
• To make auto power off settings, select “Auto Power
Off”.
• To make sleep settings, select “Sleep”.
— While the AC adaptor is connected to the camera
5. On the screen that appears, use [+] and [–] to
make the setting you want, and then press the
shutter release button.
Auto power off settings: “2 min” “5 min”
Sleep settings: “Off” “30 sec” “1 min” “2 min”
Download from Www.Somanuals.com. All Manuals Search And Download.
E-38
GETTING ACQUAINTED
Side marked arrow
should face the front
side of the camera!
2. As shown in the
Memory Cards
illustration, slide the
memory card into the
slot and push it in as
far as it will go.
This camera supports use of a CompactFlash memory card
(CF TYPE I/II) or IBM microdrive for image storage. Note
that all mentions of “memory” card in this manual refer both
to a CompactFlash memory card and IBM microdrive, unless
specifically noted otherwise.
• If the Eject button is
extended, press it in
before sliding the
memory card into the
slot.
IMPORTANT!
Eject button
• Make sure that the power of the camera is turned off
before you insert or remove a memory card.
• When inserting a memory card into the camera, make
sure that the card is oriented correctly. Make sure that
the correct side of the card is facing up, and that you
insert the correct end of the card into the camera.
Side marked
with arrow
3. Close the memory card
slot cover.
Inserting a Memory Card into the Camera
1. Open the memory card
slot cover.
Memory card slot cover
Download from Www.Somanuals.com. All Manuals Search And Download.
E-39
GETTING ACQUAINTED
5. Close the memory card
Removing a Memory Card from the Camera
slot cover.
1. Open the memory card
slot cover.
IMPORTANT!
• Insert only memory cards into the memory card slot.
Inserting any other type of card can cause malfunc-
tion.
2. Press the eject button
so it extends from the
camera.
• Should water or any other foreign matter get into the
memory card slot, immediately turn off power, unplug
the AC adaptor, and contact your original retailer or
nearest CASIO Service Provider.
• Never eject the CompactFlash card while the card slot
is facing downwards. Doing so creates the danger of
the CompactFlash card falling, which can corrupt im-
age data on the card.
• Never remove the memory card from the camera
while the operation lamp or card access lamp is flash-
ing. Doing so can cause loss of recorded images or
corruption of memory card data.
Eject button
3. Press the eject button
once again to eject the
card.
4. Remove the memory
card.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-40
GETTING ACQUAINTED
2. Select “Format” using one of the following two
Formatting a Memory Card
You can format a memory card to delete all of the data
stored on it.
key operations, and then press the shutter re-
lease button.
If you are here
REC mode
Select this on the menu screen
“FUNCTION” “SET UP” “Format”
“SET UP” “Format”
IMPORTANT!
• Formatting a memory card deletes all images on the
card, even if some or all of the images are protected
(page E-112).
• Formatting a memory card deletes all Best Shot Mode
scene sample images stored on it. After deleting the
card, you have to import the scenes you want to the
memory card (page E-72).
• Data deleted by a memory card format operation can-
not be recovered! Be sure to carefully check and con-
firm that you no longer need the data stored in a
memory card before formatting it.
PLAY mode
• Use [+] and [–] to select each menu item, and press
the shutter release button to advance to the next
menu.
3. In response to the confirmation message that
appears, use [+] and [–] to select “Yes” to for-
mat or “No” to exit, and then press the shutter
release button.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-41
GETTING ACQUAINTED
• Formatting is recommended for any memory card that you
Memory Card Precautions
suspect contains corrupted image data (due to a DECODE
ERROR, strange image colors, malformed images) or
newly purchased memory cards.
• Images cannot be recorded with this camera unless a
memory card is installed in it.
• Be sure to use only CASIO brand CompactFlash cards.
Proper operation with other memory cards is not guaran-
teed.
• Before starting a format operation, load a full set of new
batteries (alkaline or lithium) into the camera or connect
the AC adaptor to power the camera. Interruption of cam-
era power during the format operation results in improper
formatting, making it impossible to use the memory card.
• Static electricity, electrical noise, and other electrical phe-
nomena can cause corruption or even total loss of the data
stored on a memory card. Because of this, you should al-
ways make backup copies of important images on other
media (magnetic optical disk, floppy diskette, computer
hard disk, etc.).
IBM Microdrive Precautions
Compatibility of the camera with the IBM microdrive has
been confirmed by CASIO. However, you should note the
following important points whenever using the IBM
microdrive.
• Memory card problems can be corrected by reformatting
the memory card. Reformatting a memory card deletes all
images stored on the card, but you can use a computer to
copy the images you want to keep to the computer’s hard
disk before reformatting your card. If you plan to be record-
ing images where you do not have access to a computer, it
is a good idea to take along an extra memory card or two
just in case you experience an unexpected memory card
problem.
• Be sure to carefully read all of the documentation that
comes with the microdrive before using it.
• Note that the microdrive becomes hot during normal use.
Take care when removing it from the camera.
• Take care to avoid strong pressure on the label side of the
microdrive when it is removed from the camera. Strong
pressure can damage internal components and cause mal-
function.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-42
GETTING ACQUAINTED
• Never turn off camera power or subject the camera to im-
pact while the operation lamp is flashing. Doing so can
cause malfunction of the microdrive.
In case of microdrive malfunction....
• Contact your original microdrive retailer or the contact
point noted in the microdrive documentation.
• CASIO does not provide any servicing or maintenance
support for the microdrive.
• Note that CASIO assume no responsibility for any data
loss you may suffer while using the microdrive.
• This camera supports use of both a CompactFlash card
and the microdrive. Note, however, that ejecting a
microdrive from the camera is relatively more difficult than
ejecting a CompactFlash card.
• The microdrive is a very high precision device. Dropping
the camera can result in malfunction of the microdrive,
even though the camera is undamaged. Take extra care
when handling the camera while the microdrive is installed.
• The microdrive has very large storage capacity. Because
of this, certain operations can take a relatively long time to
perform.
• The microdrive may not operate properly in areas where
barometric pressure is low. Because of this, you should
avoid using it at high altitudes.
• A microdrive consumes much more electrical power than a
CompactFlash card. Depending on how a microdrive is
used, it can greatly reduce battery life. When using alkaline
batteries, certain operating conditions and certain battery
brands can result in batteries going dead right after you
install new ones. Whenever using a microdrive, we recom-
mend that you use rechargeable nickel metal hydride bat-
teries or lithium batteries to power the camera.
• When battery power is low, the amount of time required
between shots may become longer. This longer interval is
designed to protect the microdrive.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-43
GETTING ACQUAINTED
Example Displays
Menu Screens
Pressing MENU displays the menu screen. The contents of
the menu screen depend on whether you are in the PLAY
mode or REC mode. The following procedure shows opera-
tion in the REC mode as an example.
REC mode, page 1
Items
1. Slide the POWER ON/OFF switch to the right to
turn on the camera.
2. Slide the REC/PLAY selector to “REC”.
On-screen guidance
• To perform a menu operation in the PLAY mode, slide
the REC/PLAY selector to “PLAY”.
REC mode FUNCTION menu, page 2
3. Press MENU.
4. Use [+] and [–] to select the item you want, and
Items
then press the shutter release button.
• Make setting in accordance with the guidance mes-
sages that appear on the monitor screen.
[+] [–]: Item selection, page scrolling
On-screen guidance
Shutter release button: Applies displayed setting
MENU: Returns to previous screen
• Pressing the
button is sometimes required to exit
certain setting screens.
• See the “Camera Menus” on page E-146 for more informa-
tion about menu contents.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-44
GETTING ACQUAINTED
Setting the Date and Time
Setting the Current Date and Time
Use the following procedures to set the current date and
time, and to select the date format.
When you record an image, the time and date the image was
shot is registered in accordance with data from the camera’s
built-in clock. You can even use the time stamp function to
“stamp” the date and time inside the image.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
2. Press MENU.
3. Select “Date/Time” using one of the following
two key operations, and then press the shutter
release button.
IMPORTANT!
• The time and date settings are cleared if the camera is
left for about 24 hours without battery and AC power
being supplied. If this happens, restore power and
make new time and date settings before using the
camera again.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Date/Time”
PLAY mode
“Date/Time”
• A flashing time display indicates that the time and date
(clock) settings have been cleared. Use the procedure
on this page to make the correct time and date set-
tings.
• Use [+] and [–] to select each menu item, and press
the shutter release button to advance to the next
menu.
• If you do not set the camera’s built-in clock to the cur-
rent date and time, all images are recorded with the
default date and time, which probably is not your cor-
rect current date and time. Be sure to correctly set the
clock before you use the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-45
GETTING ACQUAINTED
4. Select and change the digits on the screen to
Selecting the Date Format
You can use the following procedure to select one of the
three different date formats.
set the current date and time.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
Green
marker
2. Press MENU.
3. Select “Date Style” using one of the following
two key operations, and then press the shutter
release button.
Shutter release button: Moves the green marker.
[+] / [–]: Increases and decreases the currently selected
digit.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Date Style”
5. Press
6. Press
to apply your settings.
PLAY mode
“Date Style”
to exit this setting screen.
• Use [+] and [–] to select each menu item, and press
the shutter release button to advance to the next
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-46
GETTING ACQUAINTED
4. Use [+] and [–] to select the setting you want to
1. Turn on the camera and then slide the REC/
use, and then press the shutter release button
to apply it.
PLAY selector to “REC”.
2. Press MENU.
Example: October 18, 2001
3. Select “FUNCTION” “Time Stamp”, and then
Year/Month/Day: 01/10/18
Day/Month/Year: 18/10/01
Month/Day/Year: 10/18/01
press the shutter release button.
4. Use [+] and [–] to select the setting you want,
and then press the shutter release button to
apply it.
5. Press
to exit this setting screen.
Example:
Date: October 18, 2001
Time: 1:25pm
Time Stamp
When it is turned on, the time stamp function digitally stamps
the recording date and time in the lower right corner of each
image as it is recorded. Note that once an image is stamped,
the date and time cannot be deleted.
Off : No time stamping
2001/10/18 : Year/Month/Day
18 1:25pm : Day Hour:Minutes
2001/10/18 1:25pm : Year/Month/Day Hour:Minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
E-47
|