E
INSTRUCTION
MANUAL
E
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Canon product.
The EOS 5D Mark II is a high-performance, digital SLR camera with a
full-frame (approx. 36mm x 24mm) CMOS sensor with 21.10 effective
megapixels. Other features include DIGIC 4, high-precision and high-
speed, 9-point AF (plus six Assist AF points); approx. 3.9 fps
continuous shooting; Live View shooting; and Full HD (Full High-
Definition) movie shooting.
The camera is highly responsive to any shooting situation at anytime,
provides many features for demanding shoots, and expands shooting
possibilities with system accessories.
Take a Few Test Shots to Familiarize Yoursewith the
Camera
With a digital camera, you can immediately view tige you have
captured. While reading this manual, taw test ss and see how
they come out. You can then better uhe cam.
To avoid botched pictures and ccidenthe Safety arnings
(p.219,220) and Handling s (p13).
Testing the Ca Beand Liability
After shootinglayback and ther the image has been
properly record. If the cameremory card is faulty and the
images cannot recordeor downloaded to a personal computer,
Canon cannot be ld liafor any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.
CF Card
In this manual, “card” refers to the CF card. The CF card (for
recording images) is not included. Please purchase it separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Battery Pack LP-E6
(with protective cover)
Battery Charger
LC-E6/LC-E6E*
Camera
(with eyecup and
body cap)
Wide Strap
EW-EOS5DMKII
Interface
-200
Sto Video Cable
STV-250N
EOS DITAL
Solution sk
(Software
Software Instruction
Manual
(1) Instruction Manual (this booklet)
(2) Pocket Guide
Quick start guide to shooting.
(3) CD-ROM Guide
Guide to the bundled software (EOS DIGITAL
Solution Disk) and Software Instruction Manuals.
* Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a
power cord.)
If you purchased a Lens Kit, check that the lens is included.
Depending on the Lens Kit type, the lens instruction manual might also be
included.
Be careful not to lose any of the above items.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Conventions Used in this Manual
Icons in this Manual
<6>
<5>
: Indicates the Main Dial.
: Indicates the Quick Control Dial.
<9>
: Indicates the Multi-controller.
<0>
: Indicates the setting button.
0, 9,
, 8: Indicates that the respective function remains
active for 4 sec., 6 sec., 10 sec., or 16 sec.
respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the mera and on the
LCD monitor.
3: Indicates a function which can banged essing the
<M> button and changing.
M
: When shown on the right of thindicates at the
function is availaben tode Dial is set to d, s,
f, a, or F.
* Functioh canthe fu-automatic modes (1/C).
(p.**) : Referce page numore information.
: Tip or vice for better shooting.
: Problemolving vice.
: Warning to nt shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is already set to <1> or <J> (p.27).
<5> operations explained in this manual assume that the power
switch is already set to <J>.
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF50mm f/1.4 USM lens (or EF24-105mm f/4L IS USM).
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapters
For first-time DSLR users, chapters 1 and 2 explain the camera’s
basic operations and shooting procedures.
Introduction
2
23
47
Camera basics.
Getting Started
1
Basic Shooting
2
Fully automatic shooting.
53
77
Image Settings
3
4
Setting the AF aDrive s
Advanced Op
87
5
Soting featureypes of subjects.
Live iew Shoting and Movies
107
6
Shohile vwing the LCD monitor.
127
147
153
171
189
Image Playback
7
8
9
10
Sensor Cleaning
Printing Images and Transferring Images to a Computer
Customizing the Camera
Reference
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Contents
Introduction
Item Check List.................................................................................................. 3
Conventions Used in this Manual...................................................................... 4
Chapters............................................................................................................ 5
Index to Features ............................................................................................ 10
Handling Precautions ...................................................................................... 12
Quick Start Guide............................................................................................ 14
Nomenclature.................................................................................................. 16
Getting Started
23
1
Charging the Battery ................................................................................ 24
Installing and Removing the Battery.................................................. 26
Turning on the Power................................................................ 27
Installing and Removing the CF Card.................................. 29
Attaching and Detaching a Lens ............................................. 31
About the Lens Image St.................................................... 33
Basic Operation.................................................................. 34
9 Using the Quick Con................................................... 38
3MenOperons.......................................................... 40
Before YoStart.......................................................................... 42
Setting Interface Language .................................................................... 42
Setting thate and e............................................................................ 42
Formatting tard ................................................................................. 43
Set the Power-off Time/Auto Power Off ....................................................... 44
Reverting the Camera to the Default Settings.............................................. 45
About Copyright Information......................................................................... 46
Basic Shooting
47
2
1 Fully Automatic Shooting .......................................................................... 48
1 Full Auto Techniques ................................................................................ 50
C Creative Auto Shooting ............................................................................. 51
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Contents
Image Settings
53
3
Setting the Image-recording Quality.................................................................54
i: Setting the ISO Speed..............................................................................57
ASelecting a Picture Style..........................................................................59
ACustomizing a Picture Style.....................................................................61
ARegistering a Picture Style.......................................................................63
B: Setting the White Balance.......................................................................65
O Custom White Balance .........................................................................66
P Setting the Color Temperature ...............................................................67
uWhite Balance Correction ..........................................................................68
Lens Peripheral Illumination Correction ......................................................70
Creating and Selecting a Folder...........................................................72
File Numbering Methods......................................................................74
Setting the Color Space ............................................................76
Setting the AF and Drive Mo
77
4
5
f: Selecting the A.............................................................78
SSelecting the AF ...........................................................81
When Fail..............................................................84
MFanual Focusing ...............................................................84
i Scting the Drive Mod....................................................................85
j Selfer Operan....................................................................................86
Advanced erations
87
d: Program AE................................................................................................88
s: Shutter-Priority AE ...................................................................................90
f: Aperture-Priority AE.................................................................................92
Depth of Field Preview..................................................................................93
a: Manual Exposure.......................................................................................94
q Selecting the Metering Mode .....................................................................95
Setting Exposure Compensation......................................................................96
h Auto Exposure Bracketing (AEB) ..............................................................97
AAE Lock ......................................................................................................98
F: Bulb Exposures ..........................................................................................99
Mirror Lockup .................................................................................................101
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Contents
R Remote Control Shooting........................................................................... 102
DFlash Photography .................................................................................... 103
Setting the Flash ........................................................................................... 105
Live View Shooting and Movies
107
6
7
A Preparing for Live View Shooting............................................................ 108
Shooting ........................................................................................................ 110
Using AF to Focus......................................................................................... 113
Focusing Manually......................................................................................... 119
Silent Shooting .............................................................................................. 120
k Shooting Movies................................................................................ 121
Image Playback
127
xImage Playback............................................................... 128
B Shooting Information Display .................................. 129
H I Searching for Images uickly ...................................... 131
u/y Magnified View...................................................... 133
bRotating the Image..................................................... 134
Auto Playbacide Sh................................................ 135
k PlayinMovies ................................................................ 137
Viewing tImages on TV............................................................ 139
K ProtecImages................................................................................. 141
LErasing Ies.................................................................................... 142
Changing Imagck Settings............................................................... 144
Adjusting the LCD Monitor Brightness ....................................................... 144
Setting the Image Review Time ................................................................. 145
Auto Rotate of Vertical Images................................................................... 146
Sensor Cleaning
147
8
fAutomatic Sensor Cleaning ................................................................... 148
Appending Dust Delete Data......................................................................... 149
Manual Sensor Cleaning............................................................................... 151
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Contents
Printing Images and Transferring Images to a Computer 153
9
Preparing to Print ...........................................................................................154
wPrinting......................................................................................................156
Trimming the Image ....................................................................................161
W Digital Print Order Format (DPOF)...........................................................163
Direct Printing with DPOF ..............................................................................166
dTransferring Images to a Personal Computer..........................................167
Customizing the Camera
171
10
Setting Custom Functions...........................................................................172
Custom Functions .....................................................................................173
Custom Function Settings..................................................................174
C.Fn I : Exposure ....................................................................174
C.Fn II : Image.................................................................176
C.Fn III : Autofocus/Drive ...................................................178
C.Fn IV: Operation/O........................................................182
Registering My Men...........................................................186
wRegister Camera .........................................................187
Refence
189
11
B Ccking Camera Settings ....................................................................190
Checkinhe Battenformation...................................................................192
Using a Hhoower Outlet...................................................................196
Replacing the Date/Time Battery ...................................................................197
Function Availability Table .............................................................................198
Menu Settings ................................................................................................200
Troubleshooting Guide...................................................................................203
Error Codes....................................................................................................209
System Map ...................................................................................................210
Specifications.................................................................................................212
Index ..............................................................................................................223
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Index to Features
Image improvement features
• Auto Lighting Optimizer Î p.177
• Lens peripheral illumination
Power
Battery
• Charging
• Battery check
Î p.24
Î p.28
correction
Î p.70
• Noise reduction
for long exposures
• Noise reduction
for high ISO speeds
• Highlight tone priority
•
Battery information check Î p.192
Î p.176
Power outlet
Auto power off
Î p.196
Î p.44
Î p.176
Î p.177
Lens
White balance
Attaching/Detaching
Zoom
Î p.31
Î p.32
Î p.33
White balance tting
Custom B
Î p.65
Î p.66
Image Stabilizer
Cotempesetting Î p.67
alance cection Î p.68
Basic Settings
(Menu Functions)
keting
Î p.69
Language
Date/Time
Î
AF
AF de
Î p.78
LCD brightness
adjustment
Î
Î p
p.29
AF point selection
• Assist AF points
• AF point expansion
Manual focusing
Î p.81
Î p.80
Î p.180
Î p.84
Beeper
Shoot w/o car
Recording Imag
Metering
Format
Î p.43
Î p.72
Î p.74
Metering mode
Î p.95
Create/select a folder
File No.
Drive
Drive modes
Î p.85
Î p.56
Image Quality
Maximum burst
Image-recording quality Î p.54
ISO speed
Î p.57
Î p.59
Î p.76
Picture Style
Color space
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Index to Features
Movies
Î p.121
Î p.145
Shooting
Creative Auto
Program AE
Î p.51
Î p.88
Î p.90
Î p.92
Î p.94
Î p.99
Î p.101
Î p.38
Î p.86
Î p.102
Image playback
Image review time
Shutter-priority AE
Aperture-priority AE
Manual exposure
Bulb
Single image display
Î p.128
• Shooting information
display
Î p.129
Î p.137
Î p.131
Movie playback
Index display
Mirror lockup
Quick Control screen
Self-timer
Image browsing
(Jump disy)
Î p.132
Î p.133
Î p.134
Î p.146
Î p.135
Remote control
Maged vw
Manual rotate
image ate
playback
Exposure adjustment
Exposure compensation Î p.96
AEB
97
wing the images
n TV
AE lock
Î p.139
Î p.141
Î p.142
Exposure level
increments
tect
Erase
Flash
Customization
External fla
Flash control
Î p.103
Î p.105
Custom Function (C.Fn) Î p.171
My Menu
Î p.186
Flash Custom Functions Î p.106
Camera user setting
registration
Î p.187
Live View shooting
Sensor cleaning/
Dust reduction
Stills
Î p.108
• AF
- Quick mode
- Live mode
- Live face
Î p.113
Î p.115
Sensor cleaning
Î p.147
Î p.149
Add Dust Delete Data
detection mode
• Manual focusing
• Exposure simulation
• Grid
Î p.116
Î p.119
Î p.109
Î p.111
Î p.120
Viewfinder
Dioptric adjustment
Î p.34
Changing the focusing
screen
Î p.184
• Silent shooting
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunctio
The camera contains precision electronic circuitry. Nevetempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lewfinderx mirror, and
focusing screen. Do not use cleaners organic vents to clean
the camera body or lens. For stubborn e camera he nearest
Canon Service Center.
Do not touch the camera’ontawith your fingers. This is to
prevent the contacts from rrodcontacts can cause camera
misoperation.
If the camers suddenly bthe cold into a warm room,
condensatiomay form on thnd internal parts. To prevent
condensatiofirst put the camera in a sealed plastic bag and let it adjust to
the warmer teperature fore taking it out of the bag.
If condensation ms oe camera, do not use the camera. This is to avoid
damaging the camerIf there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot coming up, have the camera checked by your Canon
dealer or check the camera yourself and make sure it is working properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Handling Precautions
LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
In low or high temperatures, the LCD monitor display may seem slow or it
might look black. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the follog:
Do not drop, bend, or wet the card. Do not subit xcessive force,
physical shock, and vibration.
Do not store or use the card near aving a stg magnetic field
such as a TV set, speakers, or mavoid placrone to having
static electricity.
Do not leave the card nlighear a heat source.
Store the card in a ca
Do not store the card humlocations.
Lens
After detacg the lens from ra, attach the lens
caps or put wn the lenwith the rear end up to avoid
scratching thns surfand electrical contacts.
Contacts
Cautions During Prolonged Use
When you shoot continuously for a prolonged period or use Live View shooting
for a long period, the camera may become hot. Although this is not a
malfunction, holding the hot camera for a long period can cause slight skin
burns.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Quick Start Guide
Insert the battery. (p.26)
To charge the battery, see page 24.
1
Attach the lens. (p.31)
Align the red dot.
2
3
4
5
Set tocus mde switch
o <AF1)
Open the slot cover and
insert a card. (p.29)
Face the label side toward you
and insert the end with the
small holes into the camera.
Set the power switch to <1>.
(p.27)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Quick Start Guide
Set the Mode Dial to <1> (Full
Auto). (p.48)
All the necessary camera settings will
be set automatically.
6
7
Focus the subject. (p.35)
Look through the viewfinder and aim
the viewfinder center over the subject.
Press the shutter utton halfway, and
the camera ll fos the subject.
Taicture. (35)
ress e shutter button completely to
e thicture.
8
9
Review the picture. (p.145)
The captured image will be displayed
for about 2 sec. on the LCD monitor.
To display the image again, press the
<x> button (p.128).
To view the images captured so far, see “Image Playback” (p.128).
To delete an image, see “Erasing Images” (p.142).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Nomenclature
For detailed information, reference page numbers are provided in
parentheses (p.**).
<o> AF mode
selection/Drive mode
selection button (p.78/85)
<n> Metering mode selection
White balance selection button (p.95/65)
/
LCD panel (p.18)
<m> ISO speed
setting/Flash exposure
compensation button
(p.57/103)
EF lens mount index (p.31)
Flash-sync contacts (p.103)
Hot shoe (p.103)
<U> LCD panel
illumination button
(p.99)
<Vocal plane mark
de Dial (p.20)
<6> Main Dial
(p.36)
Shutter button
(p.35)
Strap mount
(p.23)
Remote control
sensor (p.102)
Self-timer lamp
(p.86)
Terminal cover
Microphone
(p.124)
Grip (Battery
compartment
Date/time battery
(p.197)
DC coupler
hole (p.196)
Depth-of-field preview
button (p.93)
Mirror (p.101,151)
Contacts (p.13)
Lens mount
Lens release button (p.32)
Lens lock pin
Audio/video OUT terminal (p.139)
PC terminal (p.104)
Digital terminal (p.154,167)
Remote control terminal (N3 type) (p.100)
HDMI mini OUT terminal (p.140)
External microphone IN terminal (p.125)
Body cap (p.31)
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Nomenclature
<p> AF start button
(p.35,79,110)
<9> Multi-controller (p.36)
Dioptric adjustment knob (p.34)
Speaker (p.138)
<A/I> AE lock/
FE lock button/Index/
Reduce button
Eyecup (p.100)
(p.98/103/131/133,161)
Viewfinder eyepiece
<S/u>
<A/l> Live View
shooting/Print/Share button
(p.109/159,168)
AF point selection/
Magnify button
(p.81/133,161)
<M> Menu button
(p.40)
Strap mount
(p.23)
<A> Picture Style
selection button (p.59)
<B> Info/
Trimming orientation
button
Card slot
cover (p.29)
(p.112,128,190/161)
<x> Playback
button (p.128)
Battery
<L> Erase bun
(p.142)
compartment
cover release
lever (p.26)
Extension systerminal
LCD monitor (p
Battery compartment
cover (p.26)
Light sensor (p.144)
Access lamp (p.30)
Tripod socket
<5> Quick Control Dial (p.37)
Power/Quick Control Dial
switch (p.27)
<0> Setting/Movie shooting button (p.40/122)
Card slot (p.29)
Card ejection button (p.30)
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Nomenclature
LCD Panel
- - -
- ])
- - -
Shutter speed
AF point selection ([ -
-
Busy (buSY)
Card full warning (FuLL CF)
Card error warning (Err CF)
No card warning (no CF)
Error code (Err)
Image-recording quality (p.54)
37 Large/Fine
38 Large/Normal
47 Medium/Fine
48 Medium/Normal
67 Small/Fine
Cleaning image sensor (CLn)
Aperture
Shots remaining
68 Small/Normal
Shots remaining
ng WB bracketing
1
RAW
D Small RAW
Stimer countdown
Bexposure time
White balance (p.65)
QAuto
hite balance
ection (p.68)
W
Daylight
E Shade
Aode (p.78)
X
One-Shot AF
R
Y
U
Cloudy
Tungsten light
White
fluorescent light
9
AI Focus AF
I
Flash
Z
AI Servo AF
O Custom
Color
temperature
P
Drive mode (p.85)
u
i
Single shooting
Continuous shooting
10-sec. self-timer/
Remote control
Battery check (p.28)
Exposure level indicator
k
2-sec. self-timer/
Remote control
Exposure compensation
amount (p.96)
AEB range (p.97)
<h> AEB (p.97)
Flash exposure compensation
amount (p.103)
Flash exposure
compensation (p.103)
Card writing status
ISO speed (p.57)
Metering mode (p.95)
q Evaluative metering
w Partial metering
<0> Monochrome shooting (p.60)
<g> ISO speed (p.57)
r Spot metering
e Center-weighted average metering
<A> Highlight tone priority (p.177)
The display will show only the settings currently applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Nomenclature
Viewfinder Information
Spot metering circle
AF points
Focusing screen
(Superimposed display)
<g>
ISO speed
White balance
correction
<o> Focus
confirmation
light
<
> Battery check
<A> Aock/
Ain-progress
Max. burst
<0> Monochrome
<D> Flasady
ImproE lock
shooting
warning
ISO speed
<A> Highlight tone priority
<e> High-speed sync
(FP flash)
<d> FE lock/
FEB in-progress
Exposure level indicator
Exposure compensation amount
Flash exposure compensation
amount
<y> Flash exposure
AEB range
compensation
Shutter speed
FE lock (FEL)
Busy (buSY)
Card full warning (FuLL CF)
Card error warning (Err CF)
No card warning (no CF)
Aperture
The display will show only the settings currently applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Nomenclature
Mode Dial
Camera User Settings
Most camera settings can be registered under w,
x, or y(p.187).
F
: Bulb (p.99)
a : Manual exposure (p.94)
f: Aperture-priority Ap.92)
s : Shutter-iority A90)
d
: Prop.88)
maModes
s press the shutter button.
Fmatic shooting suitable for the
subject.
1: Full Auto (p.48)
C: Creative Auto (p.51)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Nomenclature
EF24-105mm f/4L IS USM lens
Focus mode switch (p.31)
Distance scale
Infrared index
Hood mount
(p.32)
Zoom ring (p.32)
Zoom position index
(p.32)
77 mm filter thread
(front of lens)
Focusing ring (p.84,119)
ontacts (p.13)
Image Stabilizer switch (p.33)
Lens mondex (p.31)
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with
genuine Canon accessories. Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leakage and/or explosion of a battery
pack). Please note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Nomenclature
Battery Charger LC-E6
Charger for Battery Pack LP-E6 (p.24).
Power plug
Battery pack slot
Charge lamp
This power unit is intended to be correcrientata vertical or
floor mount position.
IMPORTANT SAFETY INSTS-SAHESE INSTRUCTIONS.
DANGER-TO REDUCE THRE OELECTRIC SHOCK,
CAREFULLY FOLLOW THTION
For connection a suply no, use an attachment plug adapter
of the proper cfiguration for tutlet.
Battery Charger -E6
Charger for Battery Pack LP-E6 (p.24).
Power cord
Charge lamp
Battery pack slot
Power cord socket
Download from Www.Somanuals.com. All Manuals Search And Download.
22
1
Getting Started
This chapter explains preparatoand bas
camera operations.
the trap
end of the strap through
ra’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
attached to the strap (p.100).
Eyepiece cover
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Charging the Battery
Remove the protective cover.
1
Attach the battery.
As shown in the illustration, attach the
battery securely.
2
To detach the battery, follow the
above procedure in reverse.
Recharge the atte.
For LC-E6
As the arroflip out the
batter’s prongand insert
e prto a power outlet.
LC-E6
3
-E6
LC-E6E
ct thpower cord to the
er and insert the plug into the
wer outlet.
X Recharging starts automatically and
the charge lamp blinks in orange.
Charge Lamp
Charge Level
Color
Indicator
0 - 50%
50 - 75%
75% or higher
Fully charged
Blinks once per second
Blinks twice per second
Blinks three times per second
Lights on
Orange
Green
It takes about 2.5 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and battery’s charge level.
For safety reasons, recharging in low temperatures (5
41 F - 50 F) will take a longer time (up to 4 hours).
Download from Www.Somanuals.com. All Manuals Search And Download.
°C - 10°C /
°
°
24
Charging the Battery
Tips for Using the Battery and Charger
Recharge the battery on the day before or on the day it is to be used.
Even during non-use or storage, a charged battery will gradually
discharge and lose its power.
After recharging the battery, detach it and unplug the power
cord or prongs from the power outlet.
You can attach the cover in a different
orientation to indicate whether the battery
has been recharged or not.
If the battery has been recharged, attach the
cover so that the battery-shaped hole <
aligned over the blue sticker on tery. If tattery is
exhausted, attach the cover in te orienon.
When not using the a, rehe battery.
If the battery is left in for a olonged period, a small amount
of power current is reing ixcess discharge and shorter
battery liStothe e protective cover attached. Storing
the batteafter it is fully can lower the battery’s performance.
The batty chargcan also be used in foreign countries.
The battery arges compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has worn out.
Purchase a new battery.
The charger cannot charge any battery other than Battery Pack LP-E6.
Battery Pack LP-E6 is dedicated to Canon products only. Using it with an
incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Installing and Removing the Battery
Installing the Battery
Load a fully charged Battery Pack LP-E6 into the camera.
Open the battery compartment
cover.
Slide the lever as shown by the arrow
1
2
3
and open the cover.
Insert the battery.
Insert the end with battery
contacts.
Insert tattery t locks in
pla
se thver.
s thover until it snaps shut.
Only the Batterack LP6 can be used.
Removing the Battery
Open the cover and remove the
battery.
Press the battery release lever as shown
by the arrow and remove the battery.
To prevent short circuiting, be sure to
attach the protective cover to the battery.
After opening the battery compartment cover, be careful not to swing it back
further.
Otherwise, the hinge might break.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Turning on the Power
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
<1> : The camera turns on.
<J> : The camera and <5> operate
(p.37).
About the Automatic Self-Cleaning Sensor
Whenever you set the power switch to <1/Jor <2>, the
sensor cleaning will be executed automatcallyuring the sensor
cleaning, the LCD monitor will display <fn during the
sensor cleaning, you can still shoressing e shutter button
halfway (p.35) to stop the sensand taa picture.
If you turn on/off the power switcJ>/<2at a short
interval, the <f> inot displayed. This is normal and
not a problem.
About Ao Power Of
To save btery pow, the camera turns off automatically after about
1 minute of n-opation. To turn on the camera again, just press
the shutter button halfway (p.35).
You can change the auto power-off time with the menu’s [5Auto
power off] setting (p.44).
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Turning on the Power
Checking the Battery Level
When the power switch is set to <1> or <J>, the battery level will be
indicated in one of six levels:
Icon Level (%)
Indication
100 - 70 Sufficient battery level
69 - 50 Battery level exceeds 50%
49 - 20 Battery level below 50%
19 - 10 Battery vel is low
9 - 1
Battbe exhausted soon
Recharge e battery
Battery Life
Temperature
Possible shots
At 23
A0°C / 32°F
Approx. 750
App
The figures ae are based on ged Battery Pack LP-E6, no Live View
shooting, and PA (Camera & ImaProducts Association) testing standards.
The actual nber oots may be fewer than indicated above
depending on the ooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
The lens operation is powered by the camera’s battery. Depending on
the lens used, the number of possible shots may be lower.
Using the Image Stabilizer of the lens will decrease the number of
possible shots (shorter battery life).
For battery life with Live View shooting, see page 111.
See the [7Battery info.] menu to further check the battery’s condition
(p.192).
If size-AA/LR6 batteries are used in Battery Grip BG-E6, a four-level
indicator will be displayed. ([
/
] will not be displayed.)
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Installing and Removing the CF Card
Although the thickness is different between the two types of CF
(CompactFlash) cards, either one can be inserted into the camera.
Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used.
Installing the Card
Open the cover.
Slide the cover as shown by the
1
arrow to open it.
Label side
Insert the cd.
2
3
As swn in lustration, face
side tod you and
inend with e small holes
intcamera.
f the ard is inserted in the wrong
y, it ay damage the camera.
e card ejection button will stick out.
Card ejeton
se the cover.
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
X When you set the power switch to
<1> or <J>, the number of
remaining shots will be displayed on
the LCD panel.
Shots remaining
The number of shots remaining depends on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
Setting the [1Shoot w/o card] menu option to [Off] will prevent you
from forgetting to install a card (p.200).
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Installing and Removing the CF Card
Removing the Card
Open the cover.
1
Set the power switch to <2>.
Make sure the access lamp is off,
then open the cover.
Access lamp
Remove the card.
2
Press the card ejecn button.
X The card will ome t.
Close the cover
Card ejection button
The access lamp lighwhile e picture is taken, when
data is being transferd anhen data is being
recordedaderad. While the access lamp is lit
or blinki, never do anowing. Doing so may damage
the imagdata. It may also ge the card or camera.
• Opening e card scover.
• Removing e batt.
• Shaking or bag the camera around.
If the card already contains recorded images, the image number might
not start from 0001 (p.74).
If a card-related error message is displayed on the LCD monitor, remove
and reinstall the card. If the error persists, use a different card.
If you can transfer all the images in the card to a personal computer,
transfer all the images and then format the card. The card may then
return to normal.
When holding a hard disk-type card, always hold its sides. You may
damage the card by holding its flat surfaces. Compared to CF cards,
hard disk-type cards are more vulnerable to vibration and physical
shock. If you use such a card, be careful not to subject the camera to
vibration or physical shock especially while recording or displaying
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Attaching and Detaching a Lens
Attaching a Lens
Remove the caps.
Remove the rear lens cap and the
1
body cap by turning them as shown
by the arrow.
Attach the lens.
2
Align the red dots on the lens and
camera and turn e lens as shown by
the arrow until it aps in place.
On , set thfocus mode
3 switAF> (autocus).
If it iet to <MF> (manual focus),
tofos will not operate.
move the front lens cap.
4
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
The camera cannot be used with EF-S lenses.
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Attaching and Detaching a Lens
About Zooming
To zoom, turn the zoom ring on the lens
with your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.
Detaching the Lens
While pressing the ens release
button, turn thlenas shown by
the arrow.
Turuntil it ps, then
deta
ttach st cap to the detached
.
Attaching a oo
When the dedted EW-83H ttached to the EF24-105mm f/4L
IS USM lens, it n block nwanted light and also protect the front of
the lens from rainow, st, etc. When storing the lens in a bag, etc.,
you can also attach ood in reverse.
Align the hood’s red mark with
1
the red index on the lens edge.
Turn the hood to the position
2 shown in the illustration.
Turn the hood clockwise to attach it
securely.
If the hood is not properly attached, the image periphery might look dark.
When attaching or detaching the hood, grasp the hood toward the
bottom to turn it. If you hold the front edge of the hood, it might get bent
out of shape and become unable to turn.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
About the Lens Image Stabilizer
When you use the IS lens’ built-in Image Stabilizer, camera shake is
corrected to obtain a less blurred shot. The procedure explained here is
based on the EF24-105mm f/4L IS USM lens as an example.
* IS stands for Image Stabilizer.
Set the IS switch to <1>.
1
Set the camera’s power switch to
<1>.
Press the shuttebutton halfway.
2
X The Image abier will operate.
Take icture
picture los steady in the
3
vie, press the shutter button
comtely to take the picture.
The Image Stabilizer is not effective for moving subjects.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
If you use the EF24-105mm f/4L IS USM lens for panned shots,
correction of camera shake might not be so effective.
The Image Stabilizer can operate with the focus mode switch set to
either <AF> or <MF>.
If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to <2>.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Basic Operation
Adjusting the Viewfinder Clarity
Turn the dioptric adjustment
knob.
Turn the knob left or right so that the
nine AF points in the viewfinder look
sharp.
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, sold separately) is
recommended.
Holding the Camera
To obtain sharp images, hold the camminimizamera
shake.
Horizontal shooting
Vertical shooting
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. Press the camera against your face and look through the viewfinder.
6. To maintain a stable stance, place one foot in front of the other.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and
automatic exposure metering that sets
the shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayeon the LCD panel
and in the viewfind0).
Pressing comly
This the sher and takes the
pict
Preventing a Sh
Camera mement durinent of exposure is called camera
shake. Camra shake can cablurred pictures. To prevent camera
shake, note follow:
• Hold and ste camera as shown on the previous page.
• Press the shutter button halfway to autofocus, then press the
shutter button completely.
In the d/s/f/a/F modes, pressing the <p> button halfway
will execute the same operation.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Basic Operation
6 Using the Main Dial for Selecting
(1)
After pressing a button, turn the
<6> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <6>
dial to set the desired setting.
When the function turns off or if you
press the shutter button halfway, the
camera will be ready thoot.
Use this dial eleor set the
metering mode, Ade, ISO
speint, etc.
(2)
urn th> dial ony.
ookiat the viewfinder or LCD
rn th<6> dial to set the
etting.
his dial to set the shutter speed,
aperture, etc.
9 Operating the ulti-controller
The <9> consists of a key with eight
directions and a button at the center.
Use it to select the AF point, correct
the white balance, move the AF point
or magnifying frame during Live View
shooting, scroll the playback image
during magnified view, operate the
Quick Control screen, etc.
You can also use it to select or set
menu options (except [3Erase
images] and [5Format]).
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Basic Operation
5Using the Quick Control Dial for Selecting
Before using the <5> dial, set the power switch to <J>.
(1)
After pressing a button, turn the
<5> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <5>
dial to set the desired setting.
When the function ns off or if you
press the shutter buon halfway, the
camera will be do shoot.
Usdial to sct or set the white
ive modflash exposure
coion, AF pt, etc.
n th<5> dial only.
loog at the viewfinder or LCD
turn the <5> dial to set the
ed setting.
Use this dial to set the exposure
compensation amount, the aperture
setting for manual exposures, etc.
You can also do step (1) when the power switch is set to <1>.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
9 Using the Quick Control Screen
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
Display the Quick Control screen.
Press <9> straight down.
X The Quick Control screen will appear.
1
(
)
Set the desired setting.
2
3
Use <9> to select function.
In the <1> (A) mode, you
can secertain modes (p.85)
an-recordquality
(p.54
brief ription of the selected
tion displayed on the screen’s
m.
1 (Full Auto)
he <5> or <6> dial to
ge the setting.
d/s/f/a/F
Take the picture.
Press the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
If [8C.Fn III -3: AF point selection method] is set to [1: Multi-controller
direct], the Quick Control screen cannot be displayed (p.179).
Regarding the <C> (Creative Auto) mode, see page 51.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
9 Using the Quick Control Screen
Quick Control Screen Nomenclature
Picture Style (p.59)
ISO speed (p.57)
Highlight tone priority
Aperture (p.92)
Shutter speed (p.90)
(p.177)
Exposure compensation/
AEB setting (p.97)
Flash exposure
compensation (p.103)
Shooting mode (p.20)
AF point (p.81)
Metering mode (p.95)
e mode (p.85)
Image-recording
quality (p.54)
White bce (p.65)
AF mode (p.78)
Function Setting D
the uick Control screen, select
function and press <0>. The
respective setting screen will then
appear (except for the shutter speed
and aperture).
Turn the <5> or <6> dial to
change the setting.
Press <0> to return to the Quick
Control screen.
Ð <0>
Highlight tone priority <A> cannot be set with the Quick Control screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
3Menu Operations
You can set various functions with the menus such as the image-
recording quality, date/time, etc. While looking at the LCD monitor, you
use the <M> button on the camera back and the <6> <5> dials.
<M> button
LCD monitor
<6> Main Dial
<5>
Quk Control Dial
0> tton
Fully-Automatic Modes (1/CScree
*The [2/8/9] s are ndisplayed in the fully-automatic modes. When
a fully-automatic mis , there are menu items which are not displayed.
d/s/f/a/F Menu Screen
5Set-up
8
Custom Functions
3Playback
1Shooting
9My Menu
Tab
Menu settings
Menu items
Download from Www.Somanuals.com. All Manuals Search And Download.
40
3Menu Operations
Menu Setting Procedure
Display the menu.
Press the <M> button to display
1
the menu.
Select a tab.
Turn the <6> dial to select a tab.
2
3
Select the desired item.
Turn the <5> dto select the item,
then press 0
ect e setting.
rn th<5> dial to select the
sired setting.
he current setting is indicated in
blue.
Set the desired setting.
Press <0> to set it.
5
Exit the menu.
Press the <M> button to exit the
6
menu and return to camera shooting.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
You can also use <9> to set menu settings. (Except for [3Erase
images] and [5Format].)
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Before You Start
3 Setting the Interface Language
Select [Language].
1
Under the [6] tab, select
[Language] (the third item from the
top), then press <0>.
Set the desired language.
2
Turn the <5> or <6> dial to select
the language, then press <0>.
X The language will change.
3Setting the Date and Time
Check if the camera’s date are correctly. If necessary, set
the correct date and time.
Date/Time].
1
r the [6] tab, select [Date/
Time], then press <0>.
Set the date, time and date display format.
2
Turn the <
Press <0> so
Turn the < > dial to select the desired
setting, then press < > (Returns to
5
> dial to select the number.
is displayed.
5
0
).
Exit the setting.
Turn the <5> dial to select [OK],
then press <0>.
3
X The date/time will be set and the
menu will reappear.
It is important to set the correct date/time because it will be recorded
together with each captured image.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Before You Start
3Formatting the Card
If the card is new or was previously formatted by another camera or
personal computer, formatting the card with the camera is
recommended.
When the card is formatted, all images and data in the card will
be erased. Even protected images will be erased, so make
sure there is nothing you need to keep. If necessary, transfer
the images to a personal computer, etc., before formatting the
card.
Select [Format]
Under the ] taselect [Format],
1
then press <
ct [K].
n the <5> dial to select [OK],
en press <0>.
X The card will be formatted.
X When the formatting is completed,
the menu will reappear.
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be aware
of this when selling or discarding the card. When discarding the card,
destroy the card physically to prevent personal data from being leaked.
The card capacity displayed on the card format screen might be smaller
than the capacity indicated on the card.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Before You Start
3Set the Power-off Time/Auto Power Off
You can change the auto power-off time for the camera to turn off
automatically after a certain period of non-operation. If you do not want
the camera to turn off automatically, set this to [Off]. After the power
turns off, you can turn on the camera again by pressing the shutter
button or other button.
Select [Auto power off].
1
Under the [5] tab, select [Auto
power off], then press <0>.
Set the desired tim
2
Turn the <5> select the
settinpress >.
Even if [Off] has been set, the LCD monn off automcally after
30 min. to save power. (The ’s pows not turn off.)
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Before You Start
3Reverting the Camera to the Default SettingsN
The camera’s shooting settings and menu settings can be reverted to the default.
Select [Clear settings].
1
Under the [7] tab, select [Clear
settings], then press <0>.
Select [Clear all camera settings].
2
Turn the <5> dto select [Clear all
camera stingthen press <0>.
Sele].
T5> dial select [OK],
3
th<0>.
Setti[Clear all camera settings]
ll rethe camera to the following
ault settings:
Shting Settings
Image-Recording Settings
AF mode
One-SAF
Quality
73
AF point selection tic selection
ISO speed
Picture Style
Color space
White balance
WB correction
WB-BKT
Auto
Standard
sRGB
q (Evaluative
Metering mode
metering)
Drive mode
u (Single shooting)
0 (Zero)
Q (Auto)
Canceled
Canceled
Exposure
compensation
AEB
Canceled
Peripheral
illumination
correction
Enable/
Correction
data retained
Flash exposure
compensation
0 (Zero)
File numbering
Auto cleaning
Dust Delete Data
Continuous
Enable
Live View
shooting
Disable
Custom Functions No changes
Erased
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Before You Start
Camera Settings
Camera Settings
Auto power off
Beep
1 min.
On
10 images
Image jump w/6
Auto rotate
OnzD
Shoot w/o card
Review time
Highlight alert
On
LCD brightness
Date/Time
Auto: Standard
No changes
No changes
No changes
2 sec.
Disable
Language
AF point display Disable
Histogram Brightness
Video system
Camera user settings No changes
My Menu settings No changes
3About Copyright InformationN
If you use EOS Utility (provided softwyour cright
information, the copyright information ded to thmage’s Exif
information. With the cameropyriormation can only be
viewed or deleted. If your ormon has not been set, it will
be grayed out on the screble.
he [Clear settings] screen
ayed, press the <B> button to
display the copyright information.
Press the <M> button to return
to the [Clear settings] screen.
To delete the copyright information,
select [Delete copyright
information] on the [Clear settings]
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
2
Basic Shooting
This chapter explains how to usly-automic
modes (1/C) on tDiabest results.
With the fully-automatiC)ll you do is point
and shoot athameything automatically
(p.198). Alto prevent btures due to mistaken
operations, ajor shooting settings cannot be changed in the
fully-automatmodes
Fully-
automatic
modes
About the Auto Lighting Optimizer
In the fully-automatic modes (1/C), the Auto Lighting Optimizer
will adjust the image automatically to obtain the optimum
brightness and contrast. In the d/s/f modes, the Auto
Lighting Optimizer is enabled by default (p.177).
Download from Www.Somanuals.com. All Manuals Search And Download.
47
1 Fully Automatic Shooting
Set the Mode Dial to <1>.
1
AF point
Aim any AF point over the
2 subject.
All the AF points will be used to focus,
and generally the closest object will
be focused.
Aiming the center AF point over the
subject will make fousing easier.
Focus the subje.
3
Presutter bun halfway, and
the ng ring rotate to
focus.
AF int which achieves focus
riefly ash in red. At the same
he beeper will sound and the
confirmation light <o> in the
wfinder will light.
Focus confirmation light
Take the picture.
Press the shutter button completely to
take the picture.
4
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
1 Fully Automatic Shooting
FAQ
The focus confirmation light <o> blinks and focus is not
achieved.
Aim the AF point over an area having good contrast between light
and dark, then press the shutter button halfway (p.84). If you are too
close to the subject, move away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points.
As long as the AF point covering the desired subject flashes, you
can take the picture.
The beeper continues to beep softly. (Tfos confirmation
light <o> also does not light.)
It indicates that the camera is fntinuouon a moving
subject. (The focus confirmation > does noght.) While the
beeper is beeping, yess shutter button completely to
shoot a moving sub
Pressinhe uttefway does not focus the subject.
When thfocus mode the lens is set to <MF> (Manual
Focus), e camera does not focus. Set the focus mode switch to
<AF> (AuFocus)
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred shot
due to camera shake. Either use a tripod or an external EX-series
Speedlite (sold separately, p.103) when shooting.
Although I used an external Speedlite, the bottom part of the
photo came out dark.
If the lens hood is attached, it will obstruct the flash. If the subject is
near to the camera, detach the hood before shooting with flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
1 Full Auto Techniques
Recomposing the Shot
Depending on the scene, position the subject toward e left or right to
create a balanced background and good perspive.
In the <1> (Full Auto) mode, while you press the er button
halfway to focus a still subject, the foclockedou can then
recompose the shot and press the shucompley to take the
picture. This is called “focus
Shooting a Mong S
In the <1> (Full Auto) mode, if the subject moves (distance to camera
changes) during or after you focus, AI Servo AF will take effect to focus
the subject continuously. As long as you keep aiming the AF point on
the subject while pressing the shutter button halfway, the focusing will
be continuous. When you want to take the picture, press the shutter
button completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
C Creative Auto Shooting
The <1> Full Auto mode takes care of everything, whereas the <C>
Creative Auto mode enables you to easily change the picture’s
brightness, depth of field, color tone (Picture Style), etc. The default
settings are the same as the <1> (Full Auto) mode.
* CA stands for Creative Auto.
Set the Mode Dial to <C>.
1
X The Creative Auto screen appears on
the LCD monitor.
Press <9> straight down.
2
X You can use <9to select a
function. (
)
Functions (1shown on the next
pbe seled.
t thesired setting.
e <> to select the function.
rief description of the selected
nction is displayed on the screen’s
bottom.
Turn the <5> or <6> dial to
change the setting.
Press <9> straight down to return to
step 2 screen.
Take the picture.
When the picture is taken, the LCD
4
monitor turns off.
If you change the shooting mode or turn off the power switch, the Creative
Auto settings will revert to the default. However, the image-recording quality,
self-timer and remote control settings will be retained.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
C Creative Auto Shooting
ISO speed
Shutter speed and aperture
(1)
(2)
(3)
(5)
(4)
Possible shots
Battery check
(1) Blurring/sharpening the background
Maximum burst
If you move the index mark toward the left, tharound will look
more blurred. If you move it toward tt, the bground will
look more in focus.
(2) Adjusting the picture briess
If you move the index mthe t, the picture will look
darker. If you move it tht, thpicture will look brighter.
(3) Picture Sty
You can sect one of four tyles (p.59, 60).
(4) Single, conuous, sf-timer, and remote control shooting
If you select <>, yoan shoot continuously up to about 3.9 shots
per sec. If you se<Q>, see the notes ( ) for “Self-timer
Operation” on page 86 and for “Remote Control Shooting” on page
102.
(5) Image-recording quality
When you press <0>, the image-recording quality setting screen
will appear. To set the image-recording quality, see “Setting the
Image-recording Quality” on page 54. After adjusting all the desired
settings, press <0> to return to the screen in step 2 on the
previous page.
When using an external flash, (1) cannot be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
3
Image Settngs
This chapter explains image-relction setgs:
Image-recording quaspePicture Styles,
white balance, color
In the fulautmatic C), only the image-
recordinquality, lens illumination correction,
and file mbering method can be set as explained in this
chapter. Fders caalso be created and selected.
The M icon thight of the page title indicates that the
function can be used when the Mode Dial is set to <d
F>.
/s/
f
/a/
Download from Www.Somanuals.com. All Manuals Search And Download.
53
3Setting the Image-recording Quality
You can select the pixel count and the image quality. There are six JPEG
recording quality settings: 73, 83, 74, 84, 76, and 86. There
are three RAW recording quality settings: 1, D1, and D2. RAW
images must be processed with the provided software (p.56).
Select [Quality].
Under the [1] tab, select [Quality],
1
then press <0>.
Select the image-recording quality.
2
To select a RAW seng, turn the
<6> dial. To selea JPEG setting,
turn the <5> l.
On the er right“***M
(m**** x **number
indicecorded el count,
d [**he number of possible
s (dilayed up to 999).
<0o set the selected quality.
Image-recordiQuality Setles
3 only
1 only
1+73
D2+74
* If [–] is set for both RAW and JPEG, 73 will be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
3 Setting the Image-recording Quality
Guide to Image-recording Quality Settings (Approx.)
Pixels
(megapixels)
Printing
Size
File Size Possible Maximum
Quality
(MB)
6.1
3.0
3.6
1.9
2.1
1.0
Shots
Burst
73
83
74
310
78 (310)
Approx. 21.0
(21.0M)
A2 or larger
Around A3
Around A4
610
610 (610)
330 (510)
990 (990)
910 (910)
1680 (1680)
510
Approx. 11.1
(11.1M)
JPEG
84
76
86
990
910
Approx. 5.2
(5.2M)
1680
Approx. 21.0
(21.0M)
1
RAW D1
D2
A2 or larger
Around A3
Arou
25.8
1
72
120
70
57
13 (14)
15 (15)
20 (20)
8 (8)
Approx. 10.0
(9.9M)
Approx. 5.2
(5.2M)
0.8
1
73
Approx. 21.0 A2 or lar
Approx. 2larg
.8+6.1
RAW
+
JPEG
D1 Approx.
A3
4.8+6.1
10.8+6.1
89
8 (8)
8 (8)
pprox. ger
73
D
73
Approx. 5.
Approx. 21.0 rger
A4
110
Figures for e file sizeossible shots, and maximum burst during continuous
shooting are sed on anon’s testing standards (ISO 100 and Standard
Picture Style) us2GB card. These figures will vary depending on the
subject, card brand, ISO speed, Picture Style, Custom Functions, etc.
Maximum burst during continuous shooting figures in parentheses apply to an
Ultra DMA (UDMA) 2GB card based on Canon’s testing standards.
If you select both RAW and JPEG, the same image will be recorded
simultaneously to the card in both types at the selected image-recording
quality. The two images will be saved in the same folder with the same
file numbers (file extension .JPG for JPEG and .CR2 for RAW).
When D1 or D2 is selected, the LCD panel will display D.
The icons are read as follows: 1 (RAW), D1 (Small RAW1),
D2 (Small RAW2), JPEG, 7 (Fine), 8 (Normal), 3 (Large), 4
(Medium), and 6 (Small).
Download from Www.Somanuals.com. All Manuals Search And Download.
55
3Setting the Image-recording Quality
About RAW
The RAW image is the data output by the image sensor, converted to
digital data and recorded on the card as is. You can select it from
among 1, D1, or D2. “RAW” written in the text will refer to
all three RAW settings: 1, D1, and D2.
With RAW images, you can use the provided software to make various
adjustments as needed. From the RAW image, the software can
develop and produce the adjusted image in the desired type such as
JPEG or TIFF.
About [8C.Fn II -2: High ISO speed noise redtion] and
RAW or RAW+JPEG images
Although [8C.Fn II -2: High ISO speed reductp.176) settings
(Standard/Low/Strong/Disable) are apecorded ages, the
images used for image playback (on the tor or TV een) and
direct printing (except RAW3) applied with noise reduction
(noise may be noticeable ).
Confirm the noise reductint noe-reduced images with
Digital Photo ional are).
Commercial ftware might not be able to display RAW images. Using the
provided softwe is recomended.
Maximum Burst During Continuous Shooting
The maximum burst during continuous shooting indicated on the
preceding page is the number of continuous shots that can be taken
without stopping, based on a formatted 2GB card.
The number is displayed in the
viewfinder on the bottom right. If the
maximum burst is 99 or higher, “99” will
be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
3Setting the Image-recording Quality
The maximum burst is displayed even when a card is not in the camera.
Make sure that a card is loaded before taking a picture.
If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong],
the maximum burst will be greatly reduced (p.176).
If the viewfinder displays “99” for the maximum burst, it means the maximum
burst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 or
lower. If you stop the continuous shooting, the maximum burst will increase.
After all the captured images are written to the card, the maximum burst will
be as listed on page 55.
i: Setting the ISO SpN
Set the ISO speed (image sensor’s y to light) suit the
ambient light level. In thomamodes (1/C), the ISO
speed is set automatic
s the <m> button. (9)
Set the ISO speed.
2
While looking at the LCD panel or
viewfinder, turn the <6> dial.
It can be set within ISO 100-6400 in
1/3-stop increments.
With “A” selected, the ISO speed will
be set automatically (p.58).
Download from Www.Somanuals.com. All Manuals Search And Download.
57
i: Setting the ISO SpeedN
ISO Speed Guide
Shooting Situation
ISO Speed
Flash Range
(No flash)
L, 100 - 200
Sunny outdoors
The higher the ISO speed,
400 - 800
Overcast skies, evening the farther the flash range
will be.
1600 - 6400, H1, H2
Dark indoors or night
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the
settable ISO speed range will be ISO 200 - 6400 (p.177).
Using a high ISO speed or shooting in high-temperatuconditions may
result in more grainy images. Long exposures can alscause irregular
colors in the image.
When you shoot at high ISO speeds, horizontal stray appear as
noise.
With [8C.Fn I -3: ISO expaset to “L” (equivalent to ISO 50),
“H1” (equivalent to ISO 122” (ealent to ISO 25600) can also
be set (p.174).
About “A” uto) ISO Spee
If the ISO speed is set to “A”, the actual
ISO speed to be set will be displayed
when you press the shutter button
halfway. As indicated below, the ISO
speed will be set automatically to suit the
shooting mode.
Shooting Mode
1/C/d/s/f
a/ F
ISO Speed Setting
ISO 100 - 3200
Fixed at ISO 400
Fixed at ISO 400*
With flash
* If fill flash results in overexposure, ISO 100 or a higher ISO will be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
A
Selecting a Picture StyleN
By selecting a Picture Style, you can obtain image effects matching
your photographic expression or the subject.
In the <1> (Full Auto) mode, you cannot select the Picture Style.
Press the <A> button.
1
When the camera is ready to shoot,
press the <A> button.
X The Picture Style screen will appear.
Select a Picture Style.
2
Turn the <6> <5> dial to select
a Picture S, tn press <0>.
X The ure Stll take effect and
a will be ady to shoot.
You can also use the yle] nu to select the Picture Style.
Picture Syle Effects
PStanda(C: Sndard)
The image loid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes. This is set automatically in
the <1> (Full Auto) mode.
QPortrait (C: Smooth skin tones)
For nice skin tones. The image looks softer. Effective for close-ups
of women or children.
By changing the [Color tone] (p.61), you can adjust the skin tone.
RLandscape (C: Vivid blues and greens)
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
ASelecting a Picture StyleN
SNeutral
This Picture Style is for users who prefer to process images with
their personal computer. For natural colors and subdued images.
UFaithful
This Picture Style is for users who prefer to process images with
their personal computer. When the subject is captured under a color
temperature of 5200K, the color is adjusted colorimetrically to match
the subject’s color. The image is dull and subdued.
VMonochrome (C: Monochrome image)
For black-and-white images.
Black-and-white images shot in JPEG cannot be rrted to color. If
you want to later shoot pictures in color, makre e
[Monochrome] setting has been cd. When nochrome] is
selected, <0> will appear in er and oe LCD panel.
WUser Def. 1-3
You can register your owyle sings for [Portrait],
[Landscape], etc (p.63fineicture Style which has not
been set will ave e sas the Standard Picture Style.
About the Sbols
The symbols on the f the Picture Style selection screen refer to
parameters such as [Sharpness] and [Contrast]. The numerals
indicate the parameter settings, such as [Sharpness] and [Contrast],
for each Picture Style.
Symbols
g
h
i
j
k
l
Sharpness
Contrast
Saturation
Color tone
Filter effect (Monochrome)
Toning effect (Monochrome)
Download from Www.Somanuals.com. All Manuals Search And Download.
60
A
Customizing a Picture StyleN
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see the next page.
Press the <A> button.
1
Select a Picture Style.
2
Turn the <6> or <5> dial to select
a Picture Style, then press the <B>
button.
Select a paramer.
3
Turn the <5to select a
pr, then pss <0>.
he parameter.
rn the <5> dial to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameter. The Picture
Style selection screen will reappear.
X Any settings different from the default
will be displayed in blue.
Parameter Settings and Effects
gSharpness
hContrast
0: Less sharp outline
-4: Low contrast
+7: Sharp outline
+4: High contrast
iSaturation
jColor tone
-4: Low saturation
-4: Reddish skin tone
+4: High saturation
+4: Yellowish skin tone
Download from Www.Somanuals.com. All Manuals Search And Download.
61
ACustomizing a Picture StyleN
By selecting [Default set.] in step 3, you can revert the respective
Picture Style to its default parameter settings.
To shoot with the Picture Style you modified, follow step 2 on the
preceding page to select the modified Picture Style and then shoot.
Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast] explained on the preceding
page.
kFilter Effect
With a filter effect lito a
monochrage, yan make
white ceen trestand out
more.
Filter
e Effts
N: None
Noral black-and-ith no filter effects.
Ye:Yellow The ue sky will look moral, and the white clouds will look crisper.
Or:Orange The bsky will k slightly darker. The sunset will look more brilliant.
R: Red
The blue wilok quite dark. Fall leaves will look crisper and brighter.
G:Green Skin tones and lips will look fine. Tree leaves will look crisper and brighter.
Increasing the [Contrast] will make the filter effect more pronounced.
lToning Effect
By applying a toning effect, you can
create a monochrome image in that
color. It can make the image look more
impressive.
The following can be selected: [N:None]
[S:Sepia] [B:Blue] [P:Purple]
[G:Green].
Download from Www.Somanuals.com. All Manuals Search And Download.
62
A
Registering a Picture StyleN
You can select a base Picture Style such as [Portrait] or [Landscape], adjust
its parameters as desired and register it under [User Def. 1], [User Def. 2], or
[User Def. 3]. You can create Picture Styles whose parameter settings such as
for sharpness and contrast are different. You can also adjust the parameters of a
Picture Style which has been registered to the camera with the provided software.
Press the <A> button.
1
2
Select [User Def.].
Turn the <6> or <5> dial to select
[User Def. *], thpress the <B>
button.
Pres>.
With icture Style] selected, press
0>.
Select the base Picture Style.
4
Turn the <5> dial to select the base
Picture Style, then press <0>.
To adjust the parameters of a Picture
Style which has been registered to the
camera with the provided software,
select the Picture Style here.
Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
63
ARegistering a Picture StyleN
Set the parameter.
6
Turn the <5> dial to adjust the
parameter as desired, then press
<0>.
For details, see “Customizing a
Picture Style” on pages 61-62.
Press the <M> button to register
the new Picture Style. The Picture
Style selection screwill then
reappear.
X The base PictuStwill be
indicathe rigf [User Def. *].
If a Picture Style has already been registered under [User Def. *], changing
the base Picture Style in step 4 will nullify the parameter settings of the
registered Picture Style.
To shoot with the registered Picture Style, follow step 2 on the preceding
page to select [User Def. *] and then shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
B:Setting the White BalanceN
White balance (WB) is for making the white areas look white. Normally, the
<Q
> (Auto) setting will obtain the correct white balance. If natural-looking
colors cannot be obtained with < >, you can select the white balance for
each light source or set it manually by shooting a white object. In the fully-
automatic modes (1/C), < > is set automatically.
Q
Q
Press the <n> button. (9)
1
2
Select the white balance.
While looking at the LCD panel, turn
the <5> dial.
Display
Q
W
Mode
Cerature (Arox. K: Kelvin)
Auto
3000 - 7000
5200
Daylight
Sha
E
R
7000
Cdy, twilight, su
Tusten light
6000
Y
3200
U
Whiluoresclight
Flash u
4000
I
6000
O
P
Custom (p.66)
2000 - 10000
2500 - 10000
Color temperature (p.67)
About White Balance
To the human eye, a white object looks white regardless of the type of
lighting. With a digital camera, the color temperature is adjusted with
software to make the white areas look white. This adjustment serves as
the basis for the color correction. The result is natural-looking colors in
the pictures.
You can also use the [2White balance] menu to set the white balance.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
B: Setting the White BalanceN
O Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Do this procedure under
the actual light source to be used.
Photograph a white object.
1
The plain, white object should fill the
spot metering circle.
Focus manually and set the standard
exposure for the whie object.
You can set any whbalance.
Spot metering circle
Select m WB].
2
Under ] tab, select [Custom
], thpress <0>.
ustowhite balance selection
n will appear.
Import the white balance data.
3
Turn the <6> or <5> dial to select
the image captured in step 1, then
press <0>.
X On the dialog screen which appears,
select [OK] and the data will be
imported.
Press the <n> button. (9)
4
After exiting the menu, press the
<n> button.
Select the custom white balance.
5
Look at the LCD panel and turn the
<5> dial to select <O>.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
B: Setting the White BalanceN
If the exposure obtained in step 1 is way off, a correct white balance
might not be obtained.
If the image was captured while the Picture Style was set to
[Monochrome] (p.60), it cannot be selected in step 3.
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
The personal white balance registered with the provided software will be
registered under <O>. If you do step 3, the data for the registered
personal white balance will be erased.
P Setting the Color Temperature
You can set the white balance’s coature nerically in Kelvin.
This is for advanced users.
lect hite balance].
nder e <2> tab, select [White
ance], then press <0>.
the color temperature.
2
Turn the <5> dial to select the [P].
Turn the <6> dial to set the color
temperature, then press <0>.
The color temperature can be set
from 2500K to 10000K in 100K
increments.
When setting the color temperature for an artificial light source, set white
balance correction (magenta or green) as necessary.
If you want to set <P> to the reading taken with a commercially-
available color temperature meter, take test shots and adjust the setting
to compensate for the difference between the color temperature meter’s
reading and the camera’s color temperature reading.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
uWhite Balance CorrectionN
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
White Balance Correction
Select [WB SHIFT/BKT].
1
Under the [2] tab, select [WB
SHIFT/BKT], then ss <0>.
the balance correction.
2
<9to move the “ ” mark to the
d poion.
r blue, A is amber, M is
enta, and G is green. The color in
the respective direction will be
Sample setting: AG1
corrected.
On the upper right, “SHIFT” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB SHIFT/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <u> will be displayed in the
viewfinder and on the LCD panel.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: Measuring unit indicating the
density of a color temperature conversion filter.)
Download from Www.Somanuals.com. All Manuals Search And Download.
68
uWhite Balance CorrectionN
White Balance Auto Bracketing
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing amount.
In step 2 for white balance correction,
when you turn the > dial, the “ ” mark
on the screen will ange to “
5
”
(3 points). Tng e dial to the right sets
the racketind turning it to the
M/G braeting.
B/A bias ±3 levels
X Ot side of tscreen, “BKT”
indithe bracketing direction and
he bcketing amount.
essinhe <B> button will cancel
he [WB SHIFT/BKT] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Suee
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to one-third the
normal number. Also, the white balance icon will blink on the LCD panel.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT” stands for Bracketing.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
3
Lens Peripheral Illumination Correction
Due to the lens characteristics, the four corners of the picture might look
darker. This is called lens light fall-off or drop in peripheral illumination.
This can be corrected. For JPEG images, lens light fall-off is corrected
when the image is captured. For RAW images, it can be corrected with
Digital Photo Professional (provided software).
The default setting is [Enable].
Select [Peripheral illumin.
correct.].
Under the [1] tab, select
[Peripheral illumincorrect.], then
press <0>.
1
Set the correctioting.
2
On n, check at the
attac[Correcn data
vailadisplayed.
orreion data not available] is
yed, ee “About the Lens
ction Data” on the next page.
the <5> dial to select [Enable],
then press <0>.
Take the picture.
The image will be recorded with the
3
corrected peripheral illumination.
Correction enabled
Correction disabled
Download from Www.Somanuals.com. All Manuals Search And Download.
70
3Lens Peripheral Illumination Correction
About the Lens Correction Data
The camera already contains lens peripheral light correction data for
about 25 lenses. In step 2, if you select [Enable], the peripheral light
correction will be applied automatically for any lens whose correction
data has been registered in the camera.
With the EOS Utility (provided software), you can check which lenses
have their correction data registered in the camera. You can also
register the correction data for unregistered lenses. For details, see the
Software Instruction Manual (CD-ROM) for EOS Utility.
For JG images alrd, lens peripheral light correction
cannbe applied.
Depeng on shoong conditions, noise might appear on the image
periphe
When usinparty lens, setting the correction to [Disable] is
recommended, even if [Correction data available] is displayed.
Lens peripheral light correction is applied even when an Extender is
attached.
If the correction data for the attached lens has not been registered to the
camera, the result will be the same as when the correction is set to
[Disable].
The correction amount applied will be slightly lower than the maximum
correction amount settable with Digital Photo Professional (provided
software).
If the lens does not have distance information, the correction amount will
be lower.
The higher the ISO speed, the lower the correction amount will be.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
3Creating and Selecting a Folder
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving
captured images.
Create a Folder
Select [Select folder].
1
Under the [5] tab, select [Select
folder], then press <0>.
Selecfolde
2
Turn dial to sct [Create
lder]n press <0>.
Create a new folder.
3
Turn the <5> dial to select [OK],
then press <0>.
X A new folder with a higher one-up
folder number is created.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
3Creating and Selecting a Folder
Selecting a Folder
With the Select folder screen
Lowest file number
Quantity of images
in folder
displayed, turn the <5> dial to select
the desired folder, then press <0>.
X The folder where the captured
images will be saved will be selected.
Subsequent captured images will be
recorded into the selected folder.
Folder name
Highest file number
About Foers
As with “10OS5D” for examplhe folder name starts with three digits
(folder numbfollowey five alphanumeric characters. A folder can contain
up to 9999 imas (file o. 0001 - 9999). When a folder becomes full, a new
folder with a higher ne-up folder number is created automatically. Also, if
manual reset (p.75) is executed, a new folder will be created automatically.
Folders numbered from 100 to 999 can be created.
Creating Folders with a Personal Computer
With the card open on the screen, create a new folder named “DCIM”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the “100ABC_D” format
where the first three digits is 100 - 999 followed by five alphanumeric
characters. The five characters can be a combination of upper- or lower-case
letters from A to Z, numerals, and an underscore “_”. There can be no space in
the folder name. Also, folder names cannot have the same three-digit number
such as “100ABC_D” and “100W_XYZ” even if the letters are different.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
3File Numbering Methods
The file number is like the frame number on a roll of film. The captured
images are assigned a sequential file number from 0001 to 9999 and
saved in one folder. You can change how the file number is assigned.
The file number will appear on a personal computer in this format:
IMG_0001.JPG.
Select [File numbering].
1
Under the [5] tab, select [File
numbering], then press <0>.
Select the file numbering method.
2
Turn the <5> dial select the
desired meth, thepress <0>.
Continuous
Continues the file numbering sequeafter thard is
replaced or a new folder id.
Even after you replace the ate ew folder, the file
numbering continues in se999This is convenient when
you want to sathe imageanywhere between 0001 to
9999 in multipcards or foldene folder in your personal
computer.
If the replacemeard oxisting folder already contains images
recorded previously, ile numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use a
newly-formatted card each time.
File numbering after
replacing the card
File numbering after
creating a folder
Card-1
Card-1
Card-2
100
XXX-0051
101
XXX-0052
XXX-0051
XXX-0052
Next sequential file
Download from Www.Somanuals.com. All Manuals Search And Download.
74
3File Numbering Methods
Auto Reset
The file numbering restarts from 0001 each time the card is
replaced or a new folder is created.
Whenever the card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to organize
images according to cards or folders. If the replacement card or existing
folder already contains images recorded previously, the file numbering
of the new images might continue from the file numbering of the existing
images in the card or folder. If you want to save images with the file
numbering starting from 0001, use a newly formattd card each time.
ile nbering after
eag a folder
File numbering after
replacing the card
rd-1
Card-1
Card-2
0
XXX-0051
101
XXX-0001
XXX-0051
File numberin
Manual set
To reset the le numring to 0001 or to start from file number
0001 in a new lder
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder starts
from 0001. This is convenient when you want to use different folders for the
images taken yesterday and the ones taken today, for example. After the
manual reset, the file numbering returns to continuous or auto reset.
If the file number in the folder No. 999 reaches 9999, shooting will not be
possible even if the card still has storage capacity. The LCD monitor will
display a message to replace the card. Replace with a new card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “.MOV” for movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
3Setting the Color SpaceN
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal shooting, sRGB is recommended.
In the fully-automatic modes (1/C), sRGB is set automatically.
Select [Color space].
1
Under the [2] tab, select [Color
space], then press <0>.
Set the desired color space.
2
Select [sRGB] or [Adobe RGB], then
press <0>.
About Adobe RGB
This color space imainly mercl printing and other
industrial useshis setting mended if you do not know
about image pcessing, Adoband Design rule for Camera File
System 2.0 (Ex2.21). Thimage will look very subdued in the sRGB
personal computenviroment and with printers not compatible with
Design rule for Camile System 2.0 (Exif 2.21). Post-processing of
the image with software will therefore be required.
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual in the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
4
Setting the AF and
Drive Mdes
The viewfin9 AF pois. By
sa sule AF point, you
with utofocus while
fsubjt as desired.
You can alselect e AF mode and drive mode best
matching the hooticonditions and subject.
The M icon on the right of the page title indicates that the
function can be used when the Mode Dial is set to <d
F>.
/s/
f
/a/
In the fully-automatic modes (1/C), the AF mode, AF
point selection, and drive mode are set automatically.
<AF> stands for auto focus. <MF> stands for manual focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
f: Selecting the AF ModeN
Select the AF mode suiting the shooting conditions or subject. In the
fully-automatic modes (1/C), “AI Focus AF” is set automatically.
On the lens, set the focus mode
switch to <AF>.
1
Press the <o> button. (9)
2
Select mode.
hile lg at the LCD panel, turn
3
<6dial.
: Oe-Shot AF
: AI Focus AF
Z: AI Servo AF
Download from Www.Somanuals.com. All Manuals Search And Download.
78
f: Selecting the AF ModeN
One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
When focus is achieved, the AF point
which achieved focus will flash in red,
and the focus confirmation light <o>
in the viewfinder will also light.
With evaluative metering, the
exposure settinill be set at the
same time focus achieved.
AF point Focus confirmation
light
While you hon the shutter button
hahe focull be locked. You
compose shot if desired.
In the d
/s/f/a/F shooting AF is alspossible by
pressing the <p.
If focus cannot be acus cfirmation light <o> in the
viewfier wilblink. a picture cannot be taken even if the
shuttbutton is pressly. Recompose the picture and try to
focus ain. Or see “When tofocus Fails” (p.84).
If the [Beep] mu is set to [Off], the beeper will not sound when
focus is aeved
AI Servo AF for Moving Subjects
This AF mode is for moving subjects when
the focusing distance keeps changing. While
you hold down the shutter button halfway,
the subject will be focused continuously.
The exposure is set at the moment
the picture is taken.
In the d
/s/f/a/F shooting
modes, AF is also possible by
pressing the <p> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
f: Selecting the AF ModeN
When the AF point selection (p.81) is automatic, the camera first
uses the center AF point to focus. Within the spot metering circle,
there are six invisible Assist AF points („ in diagram) that function in
the AI SERVO AF mode. Therefore, even if the subject moves away
from the center AF point during autofocusing, focusng can still
continue. Also, even if the subject moves far awaom the center
AF point, focus tracking continues as long ae sject is covered
by another AF point.
A manually-selected AF point will k the suct in the AI
Servo AF mode.
With AI Servo AF, the beeound en when focus is achieved.
Also, the focus confirmatithe wfinder will not light.
AI Focus Afor Automatic itching of AF Mode
AI Focus AF switches the AF mode
from One-Shot AF to AI Servo AF
automatically if the still subject starts
moving.
After the subject is focused in the
One-Shot AF mode, if the subject
starts moving, the camera will detect
the movement and change the AF
mode automatically to AI Servo AF.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound softly. However, the focus confirmation light
<o> in the viewfinder will not light.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
SSelecting the AF PointN
Select one of the nine AF points to autofocus. Manual selection enables
you to select one of the nine AF points. And automatic selection has the
camera automatically select one of the nine AF points.
In the fully-automatic modes (1/C), automatic AF point selection will
be set automatically. You cannot select the AF point.
Press the <S> button. (9)
1
X The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
Select the pot.
2
To st an Ant, you can either
or turn <6> or <5>
d
Selecting with the roll
e AF point selection will change in
e direction you tilt the <9>.
If you press <9> straight down, the
center AF point will be selected.
If you keep tilting it in the same
direction, it will toggle between
manual and automatic AF point
selection.
When all AF points light up, automatic
AF point selection will be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
SSelecting the AF PointN
Selecting with the Dial
When you turn the <6> or <5>
dial, the AF point selection will
change in the respective direction.
When all AF points light up, automatic
AF point selection will be set.
When looking at the LCD panel to select the AF point, note the following:
Automatic selection , center
right , top
,
If focus cannot be achieved with the external, EOS-dedicated Speedlite’s
AF-assist beam, select the center AF point.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
SSelecting the AF PointN
Lens’ Maximum Aperture and AF Sensitivity
With lenses whose maximum aperture is larger than f/5.6
With the center AF point, cross-type AF (sensitive to both vertical and
horizontal lines) is possible. The remaining eight AF points are
horizontal-line sensitive or vertical-line sensitive.
With lenses whose maximum aperture is larger than f/2.8
With the center AF point, high-precision, cross-type AF sensitive to both
vertical and horizontal lines is possible. The center AF point’s sensitivity
to vertical and horizontal lines is about twice as sensitive as the other
AF points. The remaining eight AF points are horiztal-line sensitive or
vertical-line sensitive.
* Except with the EF28-80mm f/2.8-4L USM and EF52.5 Compact Macro
lenses.
The Assist AF points used in the AI Servo AF
mode are within the spot metering circle and not
displayed like normal AF points. They function as
follows:
: Vertical-line sensitive with f/2.8 and f/5.6
lenses, as with the center AF point.
: Horizontal-line sensitive with f/5.6 lenses.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
When Autofocus Fails
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects difficult to focus
Low-contrast subjects
(Example: Blue sky, solid-color walls, etc.)
Subjects in low light
Extremely backlit or reflective subjects
(Example: Car with a reflective body, etc.)
Near and far subjects covered by an AF point
(Example: Animal in a cage, etc.)
Repetitive patterns
(Example: Skyscraper windows, computer koa, etc.)
In such cases, do one of the following:
(1) With One-Shot AF, focus an objecme distae as the
subject and lock the focus ore reing (p.50).
(2) Set the lens focus mod<Mand focus manually.
MF: Manuaocusing
Set the lens focus mode switch to
<MF>.
1
2
Focus the subject.
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.
If you press the shutter button halfway during manual focusing, the active
AF point and the focus confirmation light <o> in the viewfinder will light
when focus is achieved.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
i Selecting the Drive ModeN
Single and continuous drive modes are provided. In the <1> (Full
Auto) mode, single shooting is set automatically.
Press the <o> button. (9)
1
Select the drive mode.
While looking at the LCD panel, turn
2
the <5> dial.
u : Single shooting
When you press the shutter betely, onhot will be taken.
i : Continuous shooting (Max. s per sec.)
While you press tbuttcompletely, shots will be taken
continuously.
Q : 10-sectimentro
k: 2-seself-timer/Rtrol
For s-timer shootingthe next page. For remote control
shooti, see pa102.
When the intl buffer memory becomes
full during continuous shooting, “buSY” will
be displayed in the viewfinder and on the
LCD panel and shooting will be disabled
Maximum burst
temporarily. As the captured images are recorded to the card, you will be
able to shoot more images. Press the shutter button halfway to check in
the viewfinder’s bottom right for the current maximum burst. This is the
maximum number of shots that can be taken continuously.
If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait
until the access lamp stops blinking, then replace the card.
When the battery level is low, the continuous shooting speed will be
slightly slower.
In the AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
Download from Www.Somanuals.com. All Manuals Search And Download.
85
j Self-timer Operation
Use the self-timer when you want to be in the picture. The <Q> (10
sec. timer) can be used in all shooting modes.
Press the <o> button. (9)
1
Select the self-timer.
2
Look at the LCD panel and turn the
<5> dial.
Q : 10-sec. self-timer
k: 2-sec. self-timerN
Take the picture.
3
Fobject anress the
shutcomplet
ou cack the self-timer
ratiowith the self-timer lamp,
er, acountdown display (in
ds) on the LCD panel.
seconds before the picture is
taken, the self-timer lamp will stay on
and the beeper will sound faster.
After taking self-timer shots, you should check the image for proper focus
and exposure (p.128).
If you will not look through the viewfinder when you press the shutter
button, attach the eyepiece cover (p.100). If stray light enters the
viewfinder when you press the shutter button, it may throw off the
exposure.
When using the self-timer to shoot only yourself, use focus lock (p.50) for
an object at about the same distance as where you will be.
To cancel the self-timer after it starts, press the <o> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
5
Advanced Operations
In the d/a/F
ng ms, you can select
er seed, aperture, and
era ettings to change
ure and obtain various
e
The M icon on the right of the page title indicates that the
function can be used when the Mode Dial is set to <d
F>.
After you press the shutter button halfway and let go, the
/s/
f
/a/
LCD panel and viewfinder information will remain displayed
for about 4 sec. (0).
Functions which can be set in the d
/s/f/a/F
shooting modes are listed in “Function Availability Table”
(p.198)
First set the power switch to <J>.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
* <d> stands for Program.
* AE stands for Auto Exposure.
Set the Mode Dial to <d>.
1
Focus the subject.
Look through the viewfinder and aim
2
the selected AF poover the
subject. Then ress e shutter button
halfway.
X The t which hieves focus
flasand the cus
confirght <o> the
wfins bottom right lights (with
ShoF + automatic AF point
on).
hutter speed and aperture will
set automatically and displayed in
the viewfinder and on the LCD panel.
Check the shutter speed and
3 aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
Take the picture.
4
Compose the shot and press the
shutter button completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
d: Program AE
If the “30"” shutter speed and the maximum aperture
blink, it indicates underexposure.
Increase the ISO speed or use flash.
If the “8000” shutter speed and the minimum aperture
blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering the
lens.
Differences Between <d> and <1> (Full Auto)
With <1>, many functions such the AF mode, drive ode, and metering
mode are set automatically to prevent spoiled shots. e functions you can
set are limited. With <d>, only the shutter spend erture are set
automatically. You can freely set the Ade, drive, and other
functions.
About Program Shift
In the Program AE an fchange the shutter speed and
aperture combinatiet bhe camera while maintaining the
same expure. Thgram ift.
To do is, press the down halfway, then turn the <6>
dial ul the desired shd or aperture value is displayed.
Progrshift is canceled automatically after the picture is taken.
Prograhift canbe used with flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
s: Shutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture to obtain the correct exposure matching the
brightness of the subject. This is called shutter-priority AE. A faster
shutter speed can freeze the action or moving subject. Or a slower
shutter speed can create a blurred effect, giving the impression of
motion.
* <s> stands for Time value.
Frozen action
urred mo
(Fast shutter speed)
shutter spd)
e Me Dial to <s>.
Set the desired shutter speed.
While looking at the LCD panel, turn
the <6> dial.
2
Focus the subject.
Press the shutter button halfway.
X The aperture is set automatically.
3
Check the viewfinder display and
4 shoot.
As long as the aperture is not
blinking, the exposure will be correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
s: Shutter-Priority AE
If the maximum aperture blinks, it indicates
underexposure.
Turn the <6> dial to set a slower shutter speed until
the aperture stops blinking or set a higher ISO speed.
If the minimum aperture blinks, it indicates
overexposure.
Turn the <6> dial to set a faster shutter speed until
the aperture stops blinking or set a lower ISO speed.
Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the deminator of the
fractional shutter speed. For example, “125” indicates 125 sec. Also, “0"5”
indicates 0.5 sec. and “15"” is 15 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
f: Aperture-Priority AE
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to obtain the correct exposure suiting the
subject brightness. This is called aperture-priority AE.
A higher f/number (smaller aperture hole) will make more of the
foreground and background fall within acceptable focus. On the other
hand, a lower f/number (larger aperture hole) will make less of the
foreground and background fall within acceptable focus.
* <f> stands for Aperture value (aperture opening).
Sharp foreground and background
(With a small aperture o
d backgrod
(Wrge aperture opening)
ModDial to <f>.
Set the desired aperture.
While looking at the LCD panel, turn
the <6> dial.
2
Focus the subject.
Press the shutter button halfway.
3
X
The shutter speed is set automatically.
Check the viewfinder display and
4 shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
f: Aperture-Priority AE
If the “30"” shutter speed blinks, it indicates
underexposure.
Turn the <6> dial to set a larger aperture (smaller
f/number) until the blinking stops or set a higher ISO
speed.
If the “8000” shutter speed blinks, it indicates
overexposure.
Turn the <6> dial to set a smaller aperture (larger
f/number) until the blinking stops or set a lower ISO
speed.
Aperture Display
The larger the f/number, the smaller the apertpeg will be. The
apertures displayed will differ depending the lenlens is attached to
the camera, “00” will be displayed fture.
Depth of Field Pre
the pth-of-field preview button
p down the lens to the current
ture setting. You can check the
depth of field (range of acceptable focus)
through the viewfinder.
A higher f/number will make more of the foreground and background fall
within acceptable focus. However, the viewfinder will look darker.
If the depth of field is difficult to discern, hold down the depth-of-field
preview button while turning the <6> dial.
The exposure will be locked (AE lock) while the depth-of-field preview
button is pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
a: Manual Exposure
In this mode, you set both the shutter speed and aperture as desired. To
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available handheld exposure meter.
This method is called manual exposure.
* <a> stands for Manual.
Set the Mode Dial to <a>.
1
Set the shutter speed and
2 aperture.
To set the sher sed, turn the
<6> dial.
To serture, the power
swit, and tuthe <5>
dial.
Standard exposure index
Exposure level rk
the ubject.
the utter button halfway.
xposure setting will be
layed in the viewfinder and on the
LCD panel.
The exposure level mark <s> lets you
see how far you are from the
standard exposure level.
Set the exposure.
Check the exposure level and set the
4
5
desired shutter speed and aperture.
Take the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
q Selecting the Metering ModeN
You can select one of four methods to measure the subject brightness.
In the fully-automatic modes (1/C), evaluative metering is set
automatically.
Press the <n> button. (9)
1
Select the metering mode.
2
While looking at e LCD panel, turn
the <6> l.
q ive mng
Throunmetering mode suited for
poen blit subjects. The camera
sets e automatically to suit the scene.
w Partial metering
Eftive when the background is much brighter
n the subject due to backlighting, etc. Partial
metering covers about 8% of the viewfinder area at
the center.
r Spot metering
This is for metering a specific part of the subject or
scene. The metering is weighted at the center
covering about 3.5% of the viewfinder area.
e Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Setting Exposure CompensationN
Exposure compensation is used to alter the standard exposure set by
the camera. You can make the image look brighter (increased
exposure) or darker (decreased exposure). You can set the exposure
compensation up to ±2 stops in 1/3-stop increments.
Set the Mode Dial to <d>, <s>,
or <f>.
1
Check the exposure level
2 indicator.
Press the shutter button halfway and
check the exposure vel indicator.
Increased exposure for a
brighter image
Set the exposucmpensation
3 amount
Set switch tJ>, and
while at the viewnder or LCD
el, tthe <5> dial.
he <
button halfway or within (
ressing the shutter button halfway.
> dial while pressing the
Decreased exposure for a
darker image
0
)
cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
Take the picture.
4
If [8C.Fn II -4: Auto Lighting Optimizer] (p.177) is set to a setting other
than [3: Disable], the image may look bright even if a decreased exposure
compensation or flash exposure compensation (p.103, 105) has been set.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
Take care not to turn the <
inadvertently. To prevent this, set the power switch to <
5
> dial and change the exposure compensation
>.
1
The exposure compensation can also be set with [2Expo. comp./
AEB] menu (p.97).
Download from Www.Somanuals.com. All Manuals Search And Download.
96
h Auto Exposure Bracketing (AEB)N
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
Select [Expo. comp./AEB].
1
Under the [2] tab, select [Expo.
comp./AEB], then press <0>.
Set the AEB amount.
2
Turn the <
You can set the eosure compensation
amount withe < > dial. If AEB is
6> dial to set the AEB amount.
combined with ure compensation,
Aapplied ntering on the
empensatiamount.
AEB amount
Pr> to set the amount.
X When you exit the m> anhe AEB level will be displayed
on the LCD panel.
the picture.
ocus and press the shutter button
completely. The three bracketed shots will
be taken in this sequence: Standard,
decreased, and increased exposure.
Canceling AEB
Follow steps 1 and 2 to turn off the AEB amount display.
AEB will be canceled automatically when you set the power switch
to <2> or when the flash is ready to fire.
If the drive mode is set to <u>, you must press the shutter button three
times. When <i> is set and you hold down the shutter button
completely, three shots will be taken continuously, then the camera will
stop shooting. When <Q> or <k> is set, the three bracketed shots
will be taken after a 10-sec. or 2-sec. delay.
Neither flash nor bulb exposures can be used with AEB.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
AAE LockN
Use AE lock when the area of focus is to be different from the exposure
metering area or when you want to take multiple shots at the same
exposure setting. Press the <A> button to lock the exposure, then
recompose and take the shot. This is called AE lock. It is effective for
backlit subjects.
Focus the subject.
Press the shutter button halfway.
X The exposure setting will be
1
displayed.
Press the <A> buon. (0)
2
X The <A> icoightn the viewfinder
to indicate that thosure setting is
lockck).
Eacpress thA> button,
it lockrrent auto exposure
ing.
pose and take the picture.
3
you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
AE Lock Effects
AF Point Selection Method (p.81)
Metering Mode
(p.95)
Automatic Selection
Manual Selection
AE lock is applied at the AF
point that achieved focus.
AE lock is applied at the
selected AF point.
q*
AE lock is applied at the center AF point.
wre
* When the lens’ focus mode switch is set to <MF>, AE lock is applied at the
center AF point.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
F: Bulb Exposures
When bulb is set, the shutter stays open while you hold down the shutter
button completely, and closes when you let go of the shutter button. This
is called bulb exposure. Use bulb exposures for night scenes, fireworks,
the heavens, and other subjects requiring long exposures.
Set the Mode Dial to <F>.
1
Set the desired aperture.
2
While looking at the LCD panel, turn the
> or < > l.
<6
5
Take the picre
3
Whu hold n the shutter
exposuwill continue.
X Td exposutime will be
dispd on the LCD panel.
Elapsed exposure time
Since ulb exposuree noise than usual, the image might
look gh or grainy.
When 8C.Fn II -1Long exp. noise reduction] is set to [1: Auto] or
[2: On], ise gented by the bulb exposure can be reduced (p.176).
For bulb euusing the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.
Bulb exposures can also be taken with a remote controller (sold separately, p.102).
When you press the remote controller’s transmit button, the bulb exposure will start
immediately or 2 sec. later. Press the button again to stop the bulb exposure.
ULCD Panel Illumination
Each time you press the <U> button,
the LCD panel illumination will turn on or
off (9). During a bulb exposure,
pressing the shutter button completely
will turn off the LCD panel illumination.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
F: Bulb Exposures
Using the Eyepiece Cover
If you take a picture without looking at the viewfinder, light entering the
eyepiece can throw off the exposure. To prevent this, use the eyepiece
cover (p.23) attached to the camera strap.
Remove the eyecup.
1
Push the bottom of the eyecup
upward.
Attaching the epce cover.
2
Slide thyepiece er down into
the groove attach it.
Connecting he Remo
You can connethe Remote SRS-80N3 or Timer Remote
Controller TC-83 (both ld separately) or any EOS accessory
equipped with an -typerminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
Open the terminal cover.
1
Connect the plug to the remote
2 control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug’s silver part and pull out.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Mirror LockupN
Although using the self-timer or Remote Switch can prevent camera
shake, using mirror lockup to prevent camera vibrations can also help
when you use a super telephoto lens or shoot close ups.
When [8C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.180),
shooting with mirror lockup will be possible.
1 Focus the subject, press the shutter button completely
and release it.
X The mirror will swing up.
2 Press the shutter button completely agin.
X The picture is taken and the mirror gos badown.
In very bright light such as at the bki slope on unny day, take
the picture promptly r loc
Do not point the cahe sThe sun’s heat can scorch and
damage the shutte
If you e buexpo-timer, and mirror lockup in
combation, keep prehutter button completely (self-timer
delay e + bulb exposure time). If you let go of the shutter button
during 10-sec.sec. self-timer countdown, there will be a shutter-
release sd. Tis not the actual shutter release (no picture is taken).
When [1: Enable] is set, single shooting will take effect even if the drive
mode is set to continuous.
When the self-timer is set to <Q> or <k>, the picture will be taken
after 10 sec. or 2 sec. respectively.
The mirror locks up, and after 30 seconds, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.
For mirror lockup shots, using the Remote Switch RS-80N3 or Timer
Remote Controller TC-80N3 (both sold separately) is recommended.
You can also lockup the mirror and shoot with the remote controller (sold
separately, p.102). With Remote Controller RC-1, setting it to a 2-sec.
delay is recommended for shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
R Remote Control Shooting
With Remote Controller RC-1 or RC-5 (both
sold separately), you can shoot remotely up
to about 5 meters/16.4 feet from the
camera. RC-1 enables you to shoot
immediately or have a 2-sec. delay, and
RC-5 has a 2-sec. delay.
RC-1
RC-5
Focus the subject.
1
Set the lens focus mode switch to
2 <MF>.
You can also sot h <f>.
Press obutton. (9)
3
ct thelf-timer.
at tLCD panel and turn the
dial tselect <Q> or <k>.
Press the remote controller’s
5 transmit button.
Point the remote controller toward the
camera’s remote control sensor and
press the transmit button.
X The self-timer lamp lights and the
picture is taken.
Remote
control
sensor
Camera misoperation may occur near certain types of fluorescent lights.
During wireless remote control, try to keep the camera away from
fluorescent light.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
DFlash Photography
EOS-dedicated, EX-series Speedlites
An EX-series Speedlite (sold separately) makes flash photography as
easy as normal shooting without flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features
of EX-series Speedlites.
Shoe-mount Speedlites
MaLites
FE Lock
This enables you to oper sh exposure for a specific part
of the subject. Aim tr cer over the subject, then press
the <A> n and ure.
Flash Eposure Com
In the se way as normosure compensation, you can set
exposure ompenson for flash. You can set the flash exposure
compensatup t2 stops in 1/3-stop increments (with the
camera).
Press the camera’s <m> button, then turn the <5> dial while
looking at the LCD panel or LCD monitor.
Using Non-EX-series Canon Speedlites
With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
When using a Speedlite which has manual flash mode, shoot in the
manual flash mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
DFlash Photography
Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with non-Canon compact flash units at 1/
200 sec. and slower speeds. With large studio flash units, since the
flash duration is longer, set the sync speed within 1/60 sec. to 1/30 sec.
Be sure to test the flash synchronization before shooting.
PC Terminal
The camera’s PC terminal can be
used with flash units having a sync
cord. The PC termiis threaded to
prevent inadvnt sconnection.
The ca’s PC nal has no
polan connt any sync
cord s of its prity.
Cautions for Live View
When using a non-Canon Live ew shooting, set the [6
Live View/Movfun. setlent shoot.] to [Disable]
(p.120). The flh will not fire to [Mode 1] or [Mode 2].
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Do not connect to the camera’s PC terminal any flash unit requiring 250
V or more.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not fire.
A flash unit attached to the camera’s hot shoe and a flash unit connected to
the PC terminal can both be used at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
3Setting the FlashN
When an EX-series Speedlite (such as the 580EX II and 430EX II)
settable by the camera is attached, you can use the camera’s menu
screen to set the Speedlite’s flash function settings and Custom
Functions.
First attach the Speedlite to the camera and turn on the Speedlite.
For details on Speedlite functions, refer to the Speedlite’s instruction
manual.
Flash Function Settings
Select [External Speedlite
control].
Under the ] taselect [External
Spete conthen press <0>.
1
Seleh functin settings].
2
Tur<5> dial to select [Flash
nctn settings], then press <0>.
the flash function settings.
3
Turn the <5> dial to select a flash
function and set it as desired. The
procedure is the same as setting a
menu function.
On the screen, the settable items and
what’s displayed will differ depending
on the current flash mode, flash
Custom Function settings, etc.
If you press the <B> button in step 3, you can revert the setting to the
default.
With an EX-series Speedlite not settable with the camera, only [Flash
exp. comp], [E-TTL II], and [Flash firing] are settable for [Flash
function settings].
(For some EX-series Speedlites, [Shutter sync.] is also settable.)
Download from Www.Somanuals.com. All Manuals Search And Download.
105
3Setting the FlashN
About E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire
metered scene as with an external metering flash. Flash exposure
compensation may be necessary depending on the scene, so this setting is
for advanced users.
Flash C.Fn Settings
Select [Flash C.Fn settings].
1
Turn the <5> dial select [Flash
C.Fn settingheress <0>.
e flah function settings.
he <> dial to select the
n number, then set the
ion. The procedure is the same
as setting the camera’s Custom
Functions (p.172).
Canceling Speedlite Custom Function Settings
In step 1, select [Clear all Speedlite C.Fn’s] to clear all the Speedlite’s
Custom Function settings (except [C.Fn-0: Distance indicator
display]).
If you use an EX-series Speedlite and the Speedlite Custom Function’s
[Flash metering mode] is set to [TTL (autoflash)], the flash will always be
fired at full output.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
6
Live View Shooting
and Movies
You can shoot while viewing the pice camerLCD
monitor. This is called “Lsho.” You can shoot
both still photos and m
When shting mies at the 1920x1080 size (Full HD
quality), uslae-capacity card having an actual
reading/writing speed of at least 8 MB/sec.
If you use a card with a slow writing speed when shooting movies
at 1920x1080, the movie might not be recorded properly. Also, if
you playback movies on a card having a slow read/write speed,
movie might not playback properly.
To check the card’s read/write speed, refer to the card
manufacturer’s Web site.
About Remote Live View Shooting
With EOS Utility (provided software) installed in your personal
computer, you can connect the camera to the personal computer
and shoot remotely while viewing the computer screen. For details,
see the Software Instruction Manual in the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
A Preparing for Live View ShootingN
This sets the camera for Live View shooting of still photos. To shoot
movies, see page 121.
Set the shooting mode.
1
Select one of the following modes:
d
/s/f/a/F.
Select [Live View/Movie func.
2 set.].
Under the [6] tab, elect [Live View/
Movie func. set.], tn press <0>.
Select c. settin].
urn t> dial to select [LV func.
ing]en press <0>.
3
tandfor Live View.
Select the [Live View function
4 settings] type.
Turn the <5> dial to select [Stills
only], then press <0>.
For details on [Stills+movie], see
page 121.
Select the [Screen settings] type.
5
Turn the <5> dial to select [Stills
display], then press <0>.
X The screen for step 3 will reappear.
For details about this function, see
the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
A Preparing for Live View ShootingN
Display the Live View image.
6
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
Press the <A> button again to turn
off the LCD monitor and quit the Live
View shooting.
About [Screen settings]
You can select the LCD monitor’s image brightnes
Stills displayh
Geared for still photos, the imaglayed ae standard
brightness to make it easy to se
Exposure simulatio
Geared for still photViemage will closely reflect the
brightness level of tcape. If you set exposure
compention, he imess will change accordingly.
Movie dplaye
Geared fmovies, e image is displayed at the standard brightness
and the deof fiewill be wider than with [Stills display]. The
shooting coverwill also correspond to the proportion of the movie-
recording size which was set. (The semi-transparent mask on the top,
bottom, left, and right of the screen will not be included in the recorded
movie.) Even when [Movie display] is set, you can take still photos by
pressing the shutter button completely. The shutter speed, aperture,
and ISO speed will be set automatically.
During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.
Cautions for using Live View shooting are on pages 125-126.
Still and movie shooting are possible even in the fully-automatic modes
(1/C) (p.121).
Download from Www.Somanuals.com. All Manuals Search And Download.
109
ShootingN
Live View shooting is effective for still subjects whose distance to the
camera does not change. If you handhold the camera and shoot while
viewing the LCD monitor, camera shake can cause blurred images.
Using a tripod is recommended.
Use AF to focus.
1
Press the <p> button.
X The camera will focus with the current
AF mode (p.113).
Take the pictur
Presutter bn completely.
X The ll be takand the
captue is displaed on the
D mor.
2
the age review ends, the
a wilreturn to Live View
ng automatically.
Operations ring Le View Display
As with normal sg through the viewfinder, while the Live View
image is displayed, you can still use the camera buttons to change
settings and playback images.
When you press the <o> or <m> button, the setting
screen will appear on the LCD monitor and you can change the
settings.
During Live View shooting, the metering mode will be set to
evaluative metering regardless of the current metering mode setting.
To check the depth of field for still photos, press the depth-of-field
preview button. The image brightness displayed will be close to the
actual brightness of the resulting image.
During continuous shooting, the exposure set for the first shot will
also be applied to subsequent shots.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
ShootingN
Pressing the <M> button will display the menu screen so you
can set menu functions. Press the <M> button again to return
to the Live View image. If you select [2Dust Delete Data],
[6Sensor cleaning], [7Clear settings], or [7Firmware Ver.],
the Live View shooting will be terminated.
Battery Life with Live View Still Photo Shooting
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible Shots
Approx. 200
Approx. 180
The figures above are based on a fully-charged BattePack LP-E6 and CIPA
(Camera & Imaging Products Association) testing stanrds.
Continuous Live View shooting is possible for ab2 urs at 23°C/73°F or
1 hour and 50 minutes at 0°C/32°F (wi-chargetery Pack LP-E6).
The imagfield view is about 100%.
If the camera not operated for a prolonged period, the power will turn
off automatically as set with [5Auto power off] (p.44). If [5Auto
power off] is set to [Off], the Live View shooting will stop automatically
after 30 min. (camera power remains on).
A grid can be displayed. With the [6Live View/Movie func. set.]
menu’s [Grid display], you can set either [Grid 1 ] or [Grid 2 ].
With the [6Live View/Movie func. set.] menu’s [Metering timer], you
can change how long the AE lock’s setting is to be retained.
When you take a picture with flash, the shutter will sound like it took two
shots. However, only one shot will be taken.
With the stereo video cable (provided) or HDMI cable (sold separately),
you can display the Live View image on a TV (p.139-140).
You can also use a remote controller (sold separately, p.102) for Live
View shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
ShootingN
About the Information Display
Each time you press the <
B
> button, the information display will change.
White balance
Movie shooting remaining time/Elapsed time
AF point (Quick mode)
Screen settings
· h: Stills display
· g: Exposure simulation
· e: Movie display
Magnifying frame
Histogram
AE lock
Picture Style
AEB
AF mode
FEB
·
·
·
: Quick mode
: Live mode
ash-ready
attery check
ghlight tone priority
:
Live face detection mode
Drive mode
Movie recording size
Image-recording quality
Shutter speed
speed
emainin
re compeion
Aperture
Expocator/AEB e
* The display will show only the urrenplied.
About the <E> icon
If Live Viehng is ect sunlight or other hot
environmts, the <E> ifor the camera’s high internal
temperat) may appear on reen. If Live View shooting continues
with a higternal teerature, it may degrade image quality. You
should theree stop e View shooting if the warning icon appears.
If you use a har-type card and continue Live View shooting while
the <E> warning icon is displayed, the camera’s internal temperature
will further increase and the Live View shooting will then stop
automatically. Live View shooting will be disabled until the camera’s
internal temperature decreases.
The histogram and <g> icon are displayed when [Exposure
simulation] has been set as explained in step 5 on page 108. If <g>
is blinking, it indicates that the Live View image is not being displayed at
the suitable brightness due to low or bright light conditions. However, the
captured image will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low light or bright light conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Using AF to FocusN
Selecting the AF Mode
The AF modes available are [Quick mode], [Live mode] (p.115), and
[Liveu mode] (face detection) (p.116).
If you want to achieve precise focusing, set the lens focus mode switch
to <MF>, magnify the image, and focus manually (p.119).
Select the AF mode.
Under [6Live View/Movie func.
set.], select [AF mode].
While the Live Viw image is
displayed, if you ess the
<outt, you can also
selee AF mwith the <6>
Quick Mo:
The dedicad AF sensor ifocus in the One-Shot AF mode
(p.79), usinhe same F method as with viewfinder shooting.
Although you n focuhe desired area quickly, the Live View image
will be interruptomentarily during the AF operation.
AF point
Display the Live View image.
1
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
The small box in the screen is the AF
point, and the larger box is the
magnifying frame.
Magnifying frame
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Using AF to FocusN
Select the AF point.
2
3
Press the <o> button, then
use <9> to select the AF point.
If you keep tilting <9> in the same
direction, it will toggle between
manual and automatic AF point
selection.
Focus the subject.
Aim the AF point over the subject,
and hold down the p> button.
X The Live Vieagwill turn off, the
reflex mor will gck down, and
AF cuted.
X Wheachievehe beeper
ill sod the Live View image
eapar.
F pot used to focus will be
yed in red.
Take the picture.
4
Check the focus and exposure, then
press the shutter button to take the
picture (p.110).
You cannot take a picture during autofocusing. Take the picture only
while the Live View image is displayed.
Autofocus will not work with the release button on Remote Switch
RS-80N3 and Timer Remote Controller TC-80N3 (both sold separately).
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Using AF to FocusN
Live Mode:
The image sensor is used to focus. Although AF is possible with the
Live View image displayed, the AF operation will take longer than
with Quick mode. Also, achieving focus may be more difficult than with
Quick mode.
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
1
X The AF point < will appear.
Move the AF i
2
Uto mohe AF point to
wwant to us (it cannot go
to es of the picture).
f yoress <9> straight down, the
F powill return to the image
nter.
AF point
us the subject.
3
Aim the AF point over the subject,
and hold down the <p> button.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn red.
Take the picture.
4
Check the focus and exposure, then
press the shutter button to take the
picture (p.110).
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Using AF to FocusN
Liveu (Face Detection) Mode:
With the same AF method as the Live mode, the human face is
detected and focused. Have the target person face the camera.
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
1
When a face is detected, the <p>
frame will appear ovr the face to be
focused.
If multiple facee dcted, <
be displ. Use t> to move the
ver the et face.
> will
9
<
Focus tject.
ss t<p> button to focus
ce cered by the <p> frame.
2
3
ocus is achieved, the AF point will
een and the beeper will sound.
X ocus is not achieved, the AF point
will turn red.
If a face cannot be detected, the < > AF
point will be displayed and the center AF
point will be used for focusing.
Take the picture.
Check the focus and exposure, then
press the shutter button to take the
picture (p.110).
Download from Www.Somanuals.com. All Manuals Search And Download.
116
Using AF to FocusN
If the focus is way off, face detection will not be possible. If the lens
enables manual focusing even while the lens focus switch is set to
<f>, turn the focusing ring to attain rough focus. The face will then be
detected and <p> will be displayed.
An object other than a human face might be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, titled horizontally or diagonally, or partially
hidden.
The <p> focusing frame might cover only part of the face.
When you press <9> straight down, it will switch the Live mode
(p.115). You can tilt the <9> to switch to another point. If you press
<9> straight down again, it will switch bacLivu (face detection)
mode.
Since AF is not possible with a fed near tedge of the
picture, the <p> will be grayed you prese <p>
button, the center AF p< > wd to focus.
Live Moand Livu (Face Detection) Mode Notes
AF operatio
Focusing will e slightly longer.
Even when focus has been achieved, pressing the <p> button will
focus again.
The image brightness may change during and after the AF operation.
If the image flickers, making it difficult to focus, stop and resume the Live
View shooting under the actual light source to be used. Check that the
flickering has stopped, then autofocus.
If you press the <u> button in the Live mode, the AF point area will be
magnified. If it is difficult to focus in the magnified view, return to the
normal view and autofocus. Note that the AF speed may differ between
the normal and magnified views.
If you autofocus in the Live mode’s normal view and then magnify the
image, the focus might be off.
In the Liveu mode, pressing the <u> button will not magnify the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Using AF to FocusN
Live Mode and Liveu (Face Detection) Mode Notes
Shooting conditions which can make focusing difficult:
Low-contrast subjects such as the blue sky and solid-color, flat surfaces.
Subjects in low light.
Stripes and other patterns where there is contrast only in the horizontal
direction.
Under a light source whose brightness, color, or pattern keeps changing.
Night scenes or points of light.
Under fluorescent lighting or when the image flickers.
Extremely small subjects.
Subjects at the edge of the picture.
Subjects strongly reflecting light.
The AF point covers both a near and faraway sct (ch as an animal
in a cage).
Subjects which keep moving within t and cat keep still
due to camera shake or subject blur
A subject approaching or g awae camera.
Autofocusing while the ay ofocus.
Soft focus effect is appfocuens.
A special eilter i
In the Livmode or Liveu (faetection) mode, if you want to shoot a
peripheral bject and e target subject is not in focus, aim the center
AF point ovee subt to focus, then take the picture.
The external Spete will not emit the AF-assist beam.
Autofocus will not work with the release button on Remote Switch RS-
80N3 and Timer Remote Controller TC-80N3 (both sold separately).
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Focusing ManuallyN
You can magnify the image and focus precisely manually.
Set the lens focus mode switch to
<MF>.
Turn the lens focusing ring to focus
1
roughly.
Moving the magnifying frame.
2
Use <9> to move the magnifying
frame to the posion where you want
to focus.
If you pres9straight down, the
mang fraill return to the
ter.
Magnifying frame
Magimage.
Preshe <u> button.
e imge within the magnifying
me will be magnified.
3
ch time you press the <u> button,
the view will change as follows:
5x
10x
Normal view
Focus manually.
4
5
While looking at the magnified image,
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the normal view.
AE lock
Magnified area position
Magnification
Take the picture.
Check the focus and exposure, then
press the shutter button to take the
picture (p.110).
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Silent ShootingN
Below are instructions for setting the [6
Live View/Movie func. set.] menu’s [Silent
shoot.].
Mode 1
The shooting operation noise is quieter than with normal shooting
through the viewfinder. When you set the drive mode to <i>, you
can shoot continuously at approx. 3 fps.
Mode 2
When you press the shutter button coetely, one shot will be
taken. While you keep holding dotter but, the camera
operation will be suspended. Then return to e shutter
button’s halfway positionmera ation will resume. The
shooting noise is thered. En if the current drive mode
is set to continuous, onot wbe taken.
Disable
If you use a S-E lens to martical shift movements or use an
Extension Te, be suto set this to [Disable]. Setting it to [Mode
1] or [Mode 2] ll resin incorrect or irregular exposures.
When you press the shutter button completely, the shutter will sound
like it took two shots. However, only one shot will be taken.
If you use flash, the [Disable] operation will take effect even if you had
set it to [Mode 1] or [Mode 2].
When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it is set to [Mode 1] or [Mode 2].
If [Mode 2] is set and you use a remote controller (p.102) to shoot, the
operation will be the same as with [Mode 1].
Download from Www.Somanuals.com. All Manuals Search And Download.
120
k Shooting Movies
You can shoot movies in all shooting modes. Also, during the Live View
image display or movie shooting, you can take still photos by pressing
the shutter button completely. Playing back the movie on a TV set
connected to the camera is recommended (p.139-140).
Select [6Live View/Movie func.
set.].
The menu procedure is the same as
1
on page 108.
Enable movshoting.
2
Fullyatic Ms (1/C)
vie recoing] and set it to
[E
s/fa/F Modes
ect [LV func. setting].
lect [Stills+movie], then select
[Movie display].
Set the movie recording size.
3
Select [Movie rec. size] and set the
size.
• [1920x1080]
Full HD (Full High-Definition)
quality
• [640x480]
4:3 standard quality
Download from Www.Somanuals.com. All Manuals Search And Download.
121
k Shooting Movies
Display the Live View image.
Press the <A> button.
X The image matching the [Screen
settings] (p.109) setting is displayed
on the LCD monitor.
4
Focus the subject.
Before shooting a movie, focus with
5
AF or manual focus (p.113-119).
o: Shooting movie
Start shooting the ovie.
6
Press <
0> to tart oting the movie.
While the movie shot, the “
o
”
mark splayed the upper right
of th
p shg the movie.
s <> again.
7
Movie Shoog me
With a 4GB ard, you can sovie in [1920x1080] for about 12
min. At [64080], abo24 min. (Based on Canon’s testing
standards.)
You can shoot movip to about 90 min. total at 23°C/73°F. Or up to about
80 min. total at 0°C/32°F (with a fully-charged Battery Pack LP-E6).
About the Screen
During movie shooting, the top, bottom, left, and right parts of the screen will
have a semi-transparent mask. The area enclosed by the semi-transparent
mask will be the movie image that is recorded. The semi-transparent mask
size will change depending on the [Movie rec. size] setting (p.121).
In the fully-automatic modes (1/C), the movie shooting screen
will always be displayed.
In the d/s/f/a/F modes, if [LV func. setting] is set to
Stills+movie], you can still shoot movies by pressing < > even if [Screen
settings] has been set to [Stills display] or [Exposure simulation].
Download from Www.Somanuals.com. All Manuals Search And Download.
[
0
122
k Shooting Movies
Taking Still Photos During Movie Shooting
You can take a still photo at anytime by pressing the shutter button
completely, even during movie shooting. The shutter speed and aperture are
set automatically. The ISO speed is also set automatically within ISO 100 - 3200.
The still photo will cover the entire screen including the semi-transparent mask.
If you take a still photo during movie shooting, the movie will record a still photo
for about 1 sec. The captured still photo will be recorded to the card, and when
the Live View image is displayed, the movie shooting will resume automatically.
One movie file and the still photo file(s) will be recorded to the card.
Notes on Movie Shooting
Recording and Image Quality
After you start shooting a movie, the shooting stop automatically if
the file size reaches 4 GB or if thexceeds min. 59 sec.
For movie shooting, the ISO speed is sey. ISO 100 is as standard, then
it can increase up to ISO andabl12800) for low-light conditions.
If the attached lens e Stzer, the Image Stabilizer will
operate at all times not ss the shutter button halfway.
The Imbilizee total movie shooting time or the
numbof possible sase. If you use a tripod or if the Image
Stabir is not necessashould set the IS switch to <2>.
The cara’s built-microphone will also record the operation noise of the
Image Stlizer, Amotor, and in-focus beeper. Also, if you operate the
camera’s dias during movie shooting, the respective operation noise
will also be recorded. If you use a commercially-available external
microphone, you can prevent (or reduce) these noises from being recorded.
Autofocusing during movie shooting is not recommended since it might
momentarily throw the focus way off or change the exposure. If the AF
mode has been set to [Quick mode], AF is not possible even if you
press the <p> button during movie shooting.
If [Screen settings] has been set to [Stills display] or [Exposure
simulation], the start of the movie shooting might momentarily record a
substantial exposure change.
Operation
External flash cannot fire for still photos taken during movie shooting.
If [Screen settings] has been set to [Movie display], the depth-of-field
preview button will not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
k Shooting Movies
Notes on Movie Shooting
Playback and Connection to TV
If the brightness suddenly changes greatly during movie shooting, that
part might look momentarily still when you playback the movie.
If you connect the camera to a TV set with an HDMI cable (p.140) and
display the Live View image while shooting a movie at [1920x1080], the
image displayed on the TV set will be small. However, the movie itself
will be recorded in the [1920x1080] size as set.
If you connect the camera to a TV set (p.139-140) and display the Live View
image while shooting a movie, the TV will not output the sound. (The sound will
be properly recorded, but the camera will not output the souto the TV set.)
If you use a card having a slow writing speed, the five-linator
on the right might appear during movie shootndicate
much data has not yet been written to the ing capacof
the internal buffer memory). The slower thster the
indicator will climb upward. If tator beull, movie
shooting will stop automatichas st writing speed,
the indicator will either not ael wiardly go upward.
First, shoot a feovied can rite fast enough.
Indicator
Recording nd Image Qual
The movie ll be reced in the MOV format.
The movie we reced in the Picture Style currently set.
The movie will bcorded in the sRGB-equivalent color space
optimized for movies.
Exposure
With [Screen settings] set to [Movie display] or during movie shooting,
you can adjust the image brightness (exposure compensation) by setting
the power switch to <J> and turning the <5> dial (except in 1/C
modes).
During movie shooting, you can lock the exposure (AE lock) by pressing
the <A> button. To cancel the AE lock, press the <S> button. (The
metering timer will not operate.)
Center-weighted average metering will be used for movie shooting. If the
AF mode is set to [Liveu (Face detection) mode], the exposure control
will be evaluative metering linked to the detected face.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
About Sound
The sound is recorded in monaural by the camera’s built-in microphone
(p.16).
Stereo sound recording is possible by connecting an external
microphone equipped with a stereo mini plug (3.5mm dia.) to the
camera’s external microphone IN terminal (p.16).
The sound recording level will be adjusted automatically.
Display and Operating the Camera
The shutter speed and aperture displayed in the Live View screen when
the shutter button is pressed halfway are for shooting still photos.
If you take still photos during movie shooting whilrive mode is set to
<Q> or <k>, <u> (single shooting) will take ect automatically.
You can use Remote Controller RC-1/RC-5 d sarately, p.102) to
start and stop the movie shooting. C-1, setiming switch to
<2> (2-sec. delay), then press button. If e switch is set to
<o> (immediate shooting), still ing will taeffect.
If the movie shooting ossiblthe insufficient remaining
capacity of the cardrding e and movie shooting remaining
time (p.112) will bed.
Live VieShooting Cautions for Stills and Movies
Notes Abohe LivView Image
Under low ligbright light conditions, the Live View image might not
reflect the brightness of the captured image. However, for movies, the
movie image displayed will be recorded in almost the same way you see
it on the LCD monitor.
If the light source within the image changes, the screen might flicker. If
this happens, stop and resume the Live View shooting under the actual
light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun, the bright
area might appear black on the LCD monitor. In still photos, such bright
areas will be recorded properly as a bright area. In movies, the bright areas
will be recorded in almost the same way you see it on the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Live View Shooting Cautions for Stills and Movies
Notes About the Live View Image
Under low light, the Live View image might show chrominance noise. In
still photos, chrominance noise is not recorded. However, in movies, it
will be recorded in almost the same way you see it on the LCD monitor.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
Notes About the Shooting Results
When you shoot continuously with Live View function for a long period,
the camera’s internal temperature may increase and it can degrade
image quality. Terminate Live View shooting when nohooting images.
Before taking a long exposure or shooting a mie, stLive View
shooting temporarily and wait several minutes befoting. This is to
prevent image degradation.
Live View shooting in high temperahigh ISO eeds may
cause noise or irregular colors.
If you shoot still photos SO spr shoot a movie in low light,
horizontal stripes may eabls noise.
If you take the picture is mnified, the exposure might
not come t as sirednormal view before taking the
picture. Ding the magnifshutter speed and aperture will be
displayed red. Even if you the picture during magnified view, the
captured ige will sw the normal view.
Custom Functio
Live View shooting will disable certain Custom Function settings (p.173).
If [8C.Fn II -4: Auto Lighting Optimizer] (p.177) is set to anything
other than [3: Disable], the image may look bright even if a decreased
exposure compensation or flash exposure compensation has been set.
Notes about lenses and flash
The focus preset feature on super telephoto lenses cannot be used.
With an external Speedlite, FE lock, modeling flash, and test flash cannot
be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
7
Image Playback
This chapter explains how to plnd eras
photos and movies, hsplaages on a TV
screen, and other plted nctions.
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a personal computer or whose
file name was changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
xImage Playback
Single Image Display
1
Playback the image.
Press the <x> button.
X The last captured image or last image
viewed will appear.
Select the image.
2
To playback images starting with the
last image, turn the 5> dial
counterclockwise. Tplayback
images starting h e first captured
imaghe dial ckwise.
PreB> buttto change
the dimat.
Single imdispl
Single image display +
Image-recording quality
Shooting information display
Histogram display
Exit the image playback.
3
Press the <x> button to exit the
image playback and return the
camera to shooting ready.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
xImage Playback
B Shooting Information Display
Protect
Exposure compensation amount
AF Microadjustment
Folder number - File number
Card
Flash exposure
compensation amount
Aperture
Histogram
Shutter speed/
Recording time
(Brightness/RGB)
Picture Style and
settings
Metering mode
Shooting mode/
Movie
SO speed
Highlight tone priority
Color temperature if
<
P> is set
or space
Dae and time
Image-recording
quality/Movie-
recording size
Original decision (image
verification) data appended
Playback number/
Total images reced
e size
ite balance correction
Whbalance
* When you st in the W+JPEG mode, the JPEG image file size will be
displayed.
About the Highlight Alert
When the [4Highlight alert] menu is set to [Enable], overexposed
highlight areas will blink. To obtain more image detail in the
overexposed areas, set the exposure compensation to a negative
amount and shoot again.
About the AF Point Display
When the [4AF point disp.] menu is set to [Enable], the AF point
which achieved focus will be displayed in red. If automatic AF point
selection was used, multiple AF points might be displayed in red.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
xImage Playback
About the Histogram
The brightness histogram display shows the exposure level
distribution and overall brightness. The RGB histogram display is for
checking the color saturation and gradation. The display can be
switched with the [4Histogram] menu.
[Brightness] Display
Sample Histograms
This histogram is a graph showing the
distribution of the image’s brightness level. The
horizontal axis indicates the brightness level
(darker on the left and brighter on the right),
while the vertical axis indicates how many
pixels exist for each brightness level. The mo
pixels there are toward the left, the dthe
image. And the more pixels there ahe
right, the brighter the image. If there
many pixels on the left, w dewill be
lost. And if there are tos on he
right, the highdetaThe
Dark image
rmal brightness
Bright image
gradation inetween will ced. By checking the image and
its brightnehistogram, yoee the exposure level inclination
and the ovel tone reoduction.
[RGB] Display
This histogram is a graph showing the distribution of each primary
color’s brightness level in the image (RGB or red, green, and blue). The
horizontal axis indicates the color’s brightness level (darker on the left
and brighter on the right), while the vertical axis indicates how many
pixels exist for each color brightness level. The more pixels there are
toward the left, the darker and less prominent the color. And the more
pixels there are toward the right, the brighter and denser the color. If
there are too many pixels on the left, the respective color information will
be lacking. And if there are too many pixels on the right, the color will be
too saturated with no detail. By checking the image’s RGB histogram,
you can see the color’s saturation and gradation condition and white
balance inclination.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
xSearching for Images Quickly
H
Display Multiple Images on One Screen (Index display)
Search for images quickly with the index display showing four or nine
images on one screen.
Turn on the index display.
1
During image playback, press the
<I> button.
X The 4-image index display will
appear. The currently-selected image
will be highlightein a blue frame.
Press the <Ibutton again to
switch to th-ige index display.
Î
Î
ct the image.
2
When you turn the <6> dial, you
can browse the images as set with
[4Image jump w/6] (p.132).
Turn the <5> dial to move the blue
frame to select the image.
Press the <u> button to display the
selected image in the normal view.
(9 images → 4 images → 1 image)
Download from Www.Somanuals.com. All Manuals Search And Download.
131
xSearching for Images Quickly
IJump through Images (Jump display)
With the single image display, index display, and magnified view, you
can turn the <6> dial to jump through the images.
Select the jump method.
1
In the [4Image jump w/6] menu,
select the desired jump method from
[1 image/10 images/100 images/
Screen/Date/Folder/Movies/Stills],
then press <0>.
With the indedisp, you can jump
by a single screselecting
[Scr
If yoump by te, select
[Datep by folde, select
lder
by jumping.
2
Press the <x> button to playback
the image.
Turn the <6> dial.
X The jump display will proceed
according to the selected jump
method.
X On the bottom right, the jump method
and current image location are
indicated.
Jump method
Image location
Download from Www.Somanuals.com. All Manuals Search And Download.
132
u/y Magnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.
Magnify the image.
During image playback, press the
1
<u> button.
X The image will be magnified.
To increase the magnification, hold
down the <u> button. The image will
continue to be magnified until it
reaches the maximum magnification.
Press the <I> button to reduce
the magnificatiof you hold down
the button, imge will continue to
redo the simage display.
Magnified area position
roll ound the image.
e <> to scroll around the
gnified image.
exit the magnified display, press
the <x> button and the single-
image display will return.
During the magnified view, you can turn the <5> (or <6>) dial to view
another image at the same magnification and position (the display jumps
according to the selected jump method).
Magnified view is not possible during the image review immediately after
the image is taken.
The movie image cannot be magnified.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
bRotating the Image
You can rotate the displayed image to the desired orientation.
Select [Rotate].
Under the [3] tab, select [Rotate],
1
then press <0>.
Select the image.
2
Turn the <5> dial select the
image to be rotated
You can also sct image on the
index y.
tate tage.
3
h timyou press <0>, the
will tate clockwise as follows:
270° → 0°
ate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
If you have set [5Auto rotate] to [OnzD] (p.146) before taking
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set the [5Auto rotate] menu to [OnzD].
A movie cannot be rotated.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
3
Auto Playback (Slide Show)
You can playback the images in the card as an automatic slide show.
Select [Slide show].
1
Under the [4] tab, select [Slide
show], then press <0>.
Select the images to be played
Quantity of images for playback
2 back.
Turn the <5> dial to select the item,
then press <0
[All images/vs/Stills]
Tu<5> do select one of
g: [jAmages/
k/zStills]Then press
<0
der/ate]
n the <5> dial to select either
nFolder] or [iDate].
When <z > is displayed
brightly, press the <B> button.
Turn the <5> dial to select the folder
or date, then press <0>.
Item
Playback Images
jAll images All the still photos and movies in the card will be played back.
Still photos and movies in the selected folder will be played
back.
nFolder
Still photos and movies taken on the selected shooting date will
be played back.
iDate
kMovies
zStills
Only the movies in the card will be played back.
Only the still photos in the card will be played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
3Auto Playback (Slide Show)
Set the playback time and repeat
3 option.
Turn the <5> dial to select [Set up],
then press <0>.
For still photos, set the [Play time]
and [Repeat] options, then press the
<M> button.
[Play time]
[Repeat]
Start tshow.
urn t> dial to select [Start],
pre<0>.
4
[Loang image...] is displayed
ew seconds, the slide show will
To pause the slide show, press <0>.
During pause, [ ] will be displayed
on the upper left of the image. Press
<0> again to resume the slide
show.
Quit the slide show.
5
To quit the slide show and return to
the setting screen, press the
<M> button.
During pause, you can turn the <5> or <6> dial to view another
image.
During the slide show, auto power off will not work.
The display time may vary depending on the image.
To view the slide show on a TV set, see page 139-140.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
k Playing Movies
Playback the image.
Press the <x> button to display the
1
image.
Select a movie.
2
Turn the <5> dial to select the image.
During the single-image display, the
<1s> icon displayed on the
upper left indicas that it is a movie.
During the dex play, the perforation
on the left ede image indicates
thmovie. vies cannot be
pm the indisplay. Press
thbutton to switch to the
singmage display.
s <>.
the single-image display, press <0>.
he movie playback panel will appear
on the bottom.
Playback the movie.
Turn the <5> dial to select [7]
(play), then press <0>.
4
X The movie playback will start.
You can pause the movie playback by
pressing <0>.
During movie playback, you can
adjust the sound volume by turning
the <6> dial.
Speaker
For more details on the playback
procedure, see the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
k Playing Movies
Item
2 Exit
Playback Description
Returns to the single-image display.
7 Play
Pressing <0> toggles between play and stop.
Adjust the slow motion speed by turning the <5> dial. The
slow-motion speed is indicated on the upper right.
8 Slow motion
5 First frame
Displays the movie’s first frame.
Each time you press <0>, a single previous frame is
displayed. If you hold down <0>, it will rewind the movie.
3 Previous frame
Each time you press <0>, the movie will play frame-by-
frame. If you hold down <0>, it will fasforward the
movie.
6 Next frame
4 Last frame
Displays the movie’s last frame
Playback position
mm’ SS”
Playback time
Turn the <6> dial to volume oe camera’s
built-in sp.17).
Volume
Press the <B> button to switch the information display.
If you took a still photo when you shot the movie, the still photo will be
displayed for about 1 sec. during the movie playback.
If you connect the camera to a TV set (p.139-140) to playback a movie,
adjust the sound volume with the TV set. (Turning the <6> dial will not
adjust the sound volume.)
Movies cannot be edited with the camera. With ZoomBrowser EX/
ImageBrowser (provided software), you can edit out the unnecessary
beginning or ending parts of the movie.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Viewing the Images on TV
You can also view the still photos and movies on a TV set. Before
connecting or disconnecting the cable between the camera and
television, turn off the camera and television.
* Adjust the movie’s sound volume with the TV set.
* Depending on the TV set, part of the image displayed might be cut off.
Viewing on Non-HD (High-Definition) TV Sets
Connect the provided stereo
1
video cable to the camera.
Connect the stereo video cable to the
camera’s <q> terminal. Insert
the cable g ale way in.
Cone videcable to the TV
(Red)
2 set
(White)
Cohe stereo video cable to the
TV’s eo IN terminal and to the
dio terminal.
(Yellow)
on the TV and switch the
s video input to select the
connected terminal.
Set the camera’s power switch to
4 <1>.
Press the <x> button.
X The image will appear on the TV
5
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
To playback the movie, see page 137.
If the video system format does not match the TV’s, the images will not be
displayed properly. Set the proper video system format with [6Video system].
Do not use any stereo video cable other than the one provided. Images
might not be displayed if you use a different video cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
Viewing the Images on TV
Viewing on HD (High-Definition) TV Sets
The HDMI Cable HTC-100 (sold separately) is required.
Connect the HDMI cable to the
camera.
Connect the HDMI cable to the
camera’s <D> terminal.
1
With the plug’s <dHDMI MINI> logo
facing the front of the camera, insert it into
the camera’s <D> terminal.
Connect the HDI cae to the TV set.
Connect the HDle to the TV’s
2
HD.
Turn oand swch the
3 vidnput to select the
cted ort.
camera’s power switch to
4
Press the <x> button.
X The image will appear on the TV
5
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
The images will be displayed automatically
at the TV’s optimum resolution.
* By pressing the <B>
button, you can change
the display format.
To playback movies, see page 137.
Do not connect any other device to the camera’s <D>
terminal. Doing so may cause a malfunction.
Some TVs might not be able to display the captured images. In such a
case, use the provided stereo video cable to connect to the TV.
The camera’s <q> terminal and <D> terminal cannot
be used at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
140
K Protecting Images
Protecting the image prevents it from being erased accidentally.
Select [Protect images].
1
Under the [3] tab, select [Protect
images], then press <0>.
X The protect setting screen will
appear.
Image protect icon
Select the image and protect it.
Turn the <5> dl to select the
2
image to be proted, then press
<0>.
X Whimage rotected, the
will appr on the screen.
To he image otection, press
<0gain. The <K> icon will
isapar.
prott another image, repeat step
To exit the image protection, press
the <M> button. The menu will
reappear.
If you format the card (p.43), the protected images will also be erased.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.
If you erase all the images (p.143), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
141
LErasing Images
You can either select and erase images one by one or erase them in
one batch. Protected images (p.141) will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect it.
Erasing a Single Image
Playback the image to be erased.
1
Press the <L> butn.
2
X The erase meu wippear at the
bottom of the s
e thage.
the 5> dial to select [Erase],
ress 0>. The image
yed will be erased.
3Checkmarking <X> Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time.
Select [Erase images].
1
Under the [3] tab, select [Erase
images], then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
LErasing Images
Select [Select and erase images].
2
Turn the <5> dial to select [Select
and erase images], then press
<0>.
X An image will appear.
Press the <I> button to display
the three-image view. To return to the
single-image display, press the <u>
button.
Select the imago be erased.
3
Turn the <> dto select the
imago be er, then press
X Tcon will bdisplayed on
the left.
o ere another image, repeat step
e the image.
Press the <L> button.
Turn the <5> dial to select [OK],
then press <0>.
X The selected image will be erased.
3Erasing All Images in a Folder or Card
You can erase all the images in a folder or card at one time. When the
[3Erase images] menu is set to [All images in folder] or [All images
on card], all the images in the folder or card will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Changing Image Playback Settings
3Adjusting the LCD Monitor Brightness
The LCD monitor’s brightness is adjusted automatically for optimum
viewing. You can set the automatic adjustment’s brightness level
(brighter or darker) or adjust the brightness manually.
Select [LCD brightness].
1
Under the [6] tab, select [LCD
brightness], then press <0>.
Select [Auto] or [Manual].
2
Turn the <6> diamake the
selection.
Adjughtnes
3
While g to the gry chart, turn
<5ial, then press <0>.
an ust [Auto] to one of three
and [Manual] to one of seven
.
Automatic adjustment
Manual adjustment
While [Auto] is set, be careful not to obstruct the round, external light
sensor (left of the power switch) with your finger, etc.
To check the image’s exposure, you should look at the histogram
(p.130).
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Changing Image Playback Settings
3Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
Select [Review time].
1
Under the [1] tab, select [Review
time], then press <0>.
Set the desired time.
2
Turn the <5> to select the
setting, thpre<0>.
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Changing Image Playback Settings
3Auto Rotate of Vertical Images
Vertical images are rotated automatically so they
are displayed vertically on the camera’s LCD
monitor and personal computer instead of
horizontally. The setting of this feature can be
changed.
Select [Auto rotate].
1
Under the [5] tab, select [Auto
rotate], then press 0>.
Set the auto rate.
2
Turn the 5> dielect the
setpress <>.
OnzD
The vertical image is aotaton both the camera’s
LCD monitoand n the mputer.
OnD
The verticamage is automatically rotated only on the personal
computer.
Off
The vertical image is not rotated.
Auto rotate will not work with vertical images captured while Auto rotate was
[Off]. They will not rotate even if you later switch it to [On] for playback.
Immediately after image capture, the vertical image will not be
automatically rotated for the image review.
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
If the vertical image is not automatically rotated on the personal
computer screen, it means the software you are using is unable to rotate
the image. Using the provided software is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
8
Sensor Cleaning
The camera has a Self Cleaninr Unit atthed
to the image sensor’s yer -pass filter) to
shake off dust autom
The Dust Dele Date apended to the
image so at the dusaining can be erased
automaticy by Digital Professional (provided
software).
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to
attach the body cap to the camera.
Remove dust on the body cap before attaching it.
Even while the Self Cleaning Sensor Unit is operating, you can
press the shutter button halfway to interrupt the cleaning and start
shooting immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
fAutomatic Sensor Cleaning
Whenever you set the power switch to <1/J> or <2>, the Self
Cleaning Sensor Unit operates to automatically shake off the dust on
the front of the sensor. Normally, you need not be aware of this
operation. However, you can execute the sensor cleaning at anytime as
well as disable it.
Cleaning the Sensor Now
Select [Sensor cleaning].
1
Under the [6] tab, select [Sensor
cleaning], then pres<0>.
Select [now].
2
Turdial to ect [Clean
nown press <0>.
ect [], then press <0>.
crewill indicate that the
r is being cleaned. Although
will be a shutter sound, a
ture is not taken.
For best res, do thensor cleaning while the camera bottom is
placed on a tabher flat surface.
Even if you repeat the sensor cleaning, the result will not improve that
much. Right after the sensor cleaning is finished, the [Clean nowf]
option will remain disabled temporarily.
Disabling Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
X The sensor cleaning will no longer be executed when you set the
power switch to <1/J> or <2>.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
3Appending Dust Delete DataN
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that might be visible on captured images. However, in case visible dust
still remains, you can append the Dust Delete Data to the image to later
erase the dust spots. The Dust Delete Data is used by Digital Photo
Professional (provided software) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(∞). If the lens has no distance scale, look at tfront of the lens
and turn the focusing ring clockwise all tway
Obtain the Dust Delete Data
Selecst Delete Data].
ndehe [2] tab, select [Dust
lete ata], then press <0>.
Select [OK].
Turn the <5> dial to select [OK],
2
then press <0>. After the automatic
sensor cleaning ends, a message will
appear. Although there will be a
shutter sound, a picture is not taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
149
3Appending Dust Delete DataN
Photograph a solid-white object.
3
At a distance of 20 cm - 30 cm /
0.7 ft. - 1.0 ft., fill the viewfinder with a
patternless, solid-white object and
take a picture.
X
The picture will be taken in the aperture-
priority AE mode with an aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the caera.
X When the pictre is en, the camera
will start obtainitDust Delete
Data. the Duelete Data is
obtessage appear.
Selecnd the meu will
ppe
data as not obtained
ssfully, a message to that effect
pear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, you
should update the Dust Delete Data by obtaining it again.
To erase dust spots automatically with the bundled software, see the
Software Instruction Manual in the CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a new sheet of white paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
3Manual Sensor CleaningN
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Sensor cleaning].
1
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Sean manally].
2
T5> dial telect [Clean
maly], then press <0>.
Select [OK].
Turn the <5> dial to select [OK],
3
then press <0>.
X In a moment, the mirror will lockup
and the shutter will open.
“CLn” will blink on the LCD panel.
End the cleaning.
4
Set the power switch to <2>.
As power source, using the AC Adapter Kit ACK-E6 (sold separately) is
recommended.
If you use the battery, make sure it is fully recharged. If a battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
3Manual Sensor CleaningN
While cleaning the sensor, never do any of the following. Doing any
of the following will cut off the power and close the shutter. The
shutter curtains and image sensor might get damaged.
• Setting the power switch to <2>.
• Opening the battery compartment cover.
• Opening the card slot cover.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the tter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. wing force can
damage the sensor or the spray gas ze on thnsor.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
9
Printing Images and Transferring
Images to a Coputer
Printing (p.154)
You can connect thectly a printer and print
out the imin thameris compatible with
“wPictidge” which ard for direct printing.
Digital nt Order Format DPOF) (p.163)
DPOF (Dal Print rder Format) enables you to print
images recod ihe card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
Transferring Images to a Personal Computer (p.167)
By connecting the camera to a personal computer, you can
transfer images from the camera’s card by operating the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
153
Preparing to Print
The direct printing procedure is done entirely with the camera
while looking at the LCD monitor.
Connecting the Camera to a Printer
Set the camera’s power switch to
<2>.
1
Set up the printer.
2
For details, she nter’s
instructmanua
Connamera the
3 rinter.
the erface cable provided with
ame
connecting the cable plug to
mera’s <D> terminal, the
ble plug’s <D> icon must face the
front side of the camera.
To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
4
Set the camera’s power switch to
5 <1>.
X Some printers may make a beeping
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Preparing to Print
Playback the image.
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
wPictBridge
6
X The <l> button lamp will light in
blue.
Movicannot be pri
The cmera cannot be uprinters compatible only with CP Direct
or BubJet Dire
Do not any inace cable other than the one provided.
If there is a eping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
1. Press the <x> button to playback the image.
2. Press <0>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.162).
You can also print RAW images taken by this camera.
If you use the battery to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to about 3.5 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using the AC Adapter Kit ACK-E6 (sold separately) to
power the camera is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
155
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon
Select the image to be printed.
Check that the <w> icon is
1
displayed on the upper left of the LCD
monitor.
Turn the <5> dial to select the
image to be printed.
Press <
0>.
2
X The print settiscrn will appear.
Print setting screen
Sets tffects (p.8).
Sets the e number irinting to on
.
quaty to be printed.
trimmg (p.161).
paper size, type, and layout.
ns to step 1.
Starts the printing.
The paper size, type, out you have set are displayed.
* Depending on the printer, settings such as the date and file number
imprinting and trimming might not be available.
Select [Paper settings].
3
Select [Paper settings], then press
<0>.
X The paper settings screen will
appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
wPrinting
QSetting the Paper Size
YSetting the Paper Type
Select the size of the paper loaded in
the printer, then press <0>.
X The paper type screen will appear.
Select the type of the paper loaded in
the printer, then press <0>.
When using a Canon printer and
Canon paper, rethe printer’s
instruction nuto check what
papeypes cused.
X layout sen will appear.
USetting the Page Layout
elehe page layout, then press
0>.
e print setting screen will reappear.
Bordered
he print have white borders along the edges.
print l have no white borders. If your printer cannot print
bordess prints, the print will have borders.
Borderless
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
Borderedc
xx-up
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
On A4 or Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF (p.163) will be printed.
• [20-upc] will have the shooting information* imprinted.
20-upc
35-upp
The page layout will vary depending on the printer type or its
settings.
Default
* From the Exif data, the camera name, lens name, shooting mode, shutter speed,
aperture, exposure compensation amount, ISO speed, white balance, etc., will be
imprinted.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
wPrinting
Set the printing effects.
4
Set as necessary. If you need not set
any printing effects, go to step 5.
The screen display may differ
depending on the printer.
Select the option on the upper right,
then press <0>.
Select the desired printing effect with
the dial, then press <0>.
If the <e> icon is diplayed next to
<z>, you can o adjust the
printing effect 16
Item
on
The image will be printeto the prir’s standard
colors. The imExif ded to make utomatic
corrections
EOn
EOff
No automwill berformed.
hage with higher saturation to produce
more vivid blns.
EVivid
The image noise uced before printing.
rints in bk-and-white with true blacks.
ENR
0 B/W
Pin ck-and-white with cool, bluish blacks.
Prints in black-and-white with warm, yellowish blacks.
0 Cool tone
0 Warm tone
Prints the image in the actual colors and contrast. No
automatic color adjustments will be applied.
zNatural
zNatural M
EDefault
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing
adjustments than with “Natural.”
The printing will differ depending on the printer. For details,
see the printer’s instruction manual.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 160.
Download from Www.Somanuals.com. All Manuals Search And Download.
158
wPrinting
Set the date and file number
5 imprinting.
Set as necessary.
Select <I>, then press <0>.
Set as desired, then press <0>.
Set the number of copies.
Set as necessary.
Select <R>, thepress <0>.
Set the number copies, then press
<0>.
6
Starg.
SelPrint], then press <0>.
he <l> button’s blue lamp will
7
nk anthe printing will start.
With Easy printing, you can print another image with the same settings.
Just select the image and press the <l> button lit in blue. With Easy
printing, the number of copies will always be 1. (You cannot set the
number of copies.) Also, any trimming (p.161) will not be applied.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.161) has been applied, it will take longer to print
the image.
To stop the printing, press <0> while [Stop] is displayed, then select
[OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
159
wPrinting
eAdjustment of Printing Effects
In step 4 on page 158, select the printing
effect. When the <e> icon is displayed
next to <z>, press the <B>
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can
the histogram’s distribution and ad
image’s brightness and cost.
With the Adjust levels sayeress
the <B> button to chitiof
the <h>. Tur5> adjust
the shadow evel (0 - 127ht level
(128 - 255)
kBrightene
Effective in bacitions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show up on the
screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <9>. B is for blue, A is amber, M is magenta, and G is
green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
Download from Www.Somanuals.com. All Manuals Search And Download.
160
wPrinting
Trimming the Image
Tilt correction
You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.
1 On the print setting screen, select [Triming].
2 Set the trimming frame size, positiod proportion.
The image area within the trimmine printede trimming frame’s
vertical-to-horizontal proportion can with [Papsettings].
Changing the trimme si
When you press <I> button, the size of the
trimming me we smler the trimming frame, the
larger he image mwill be for the printing.
Moving e trimming fr
Use <9to move e frame over the image vertically or horizontally. Move
the trimmiframe til it covers the desired image area or composition.
Rotating the frme
Each time you press the <B> button, the trimming frame will toggle
between the vertical and horizontal orientations. This enables you to
create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <5> dial, you can adjust the image tilt angle by
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the <O> icon on the screen will turn blue.
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
161
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttonn the printer to
resume printing. For details, see the printer’s instruction mual.
Error Messages
If a problem occurs during printing, an eage wilear on the
camera’s LCD monitor. Press <0> to g. After fig the
problem, resume printing. For details on a printing blem, refer
to the printer’s instruction
Paper Error
Check whetpapeaded the printer.
Ink Error
Check the inter’s ink level, ck the waste ink tank.
Hardware Er
Check for anrinter pblems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
W Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file No. imprinting. The
print settings will be applied to all print-ordered images. (They cannot
be set individually for each image.)
Setting the Printing Options
Select [Print order].
1
X Under the [3] tab, select [Print
order], then press <0>.
Select et up]
t up], thpress <0>.
2
the option as desired.
3
Set the [Print type], [Date], and [File
No.].
Select the option, then press <0>.
Select the desired setting, then press
<0>.
[Print type]
[Date]
[File No.]
Download from Www.Somanuals.com. All Manuals Search And Download.
163
W Digital Print Order Format (DPOF)
Standard Prints one image on one sheet.
K
L
K
L
Index
Multiple, thumbnail images are printed on one sheet.
Print type
Both
Prints both the standard and index prints.
On
Date
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
Off
On
Off
File number
Exit the setting.
4
Press the <7> ton.
X The print order swill reappear.
NeSel.Ima, [Byn], or
[All iorder the ages to be
inted
Even if [De] and [File Noo [On], the date or file No. might not
be imprindepending on the print type setting and printer model.
When printwith DPF, you must use the card whose print order
specifications e n set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
Print ordering does not work with RAW images and movies.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
164
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
Press the <I> button to display the
three-image view. To return to the single-
image display, press the <u> button.
After completing the print order, press
the <M> button to save the print
order to the card.
[Standard] [Both]
Press <0> d a nt order for 1 copy
of the displayed will be placed.
The<5> l to set the
numies (up t9) to be printed
for tha.
Quantity
Total images
selected
ex]
<
uded in the index print. The <
will also appear on the upper left.
0and the displayed image will
Check mk
X
>
Index icon
Byn
Select [Bynnelect the folder. A print order for 1 copy of all the
images in the folder will be placed. If you select Clear all and a
folder, the print order for all the images in the folder will be canceled.
All image
A print order for 1 copy of all the images in the card will be placed. If
you select Clear all, the print order for all the images in the card will
be canceled.
Note that RAW images and movies will not be included in the print order
even if you set “Byn” or “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
WDirect Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1 Preparing to print.
See page 154. Follow the “Connecting the Camera to a Printer”
procedure up to step 5.
2 Under the [3] tab, select [Print order
3 Select [Print].
[Print] will be displayed only if tis conned to the
printer and printing is e.
4 Set the [Paper setti6)
Set the ptineffececessary.
5 Select [O.
Before print, be suo set the paper size.
Certain printerimprint the file No.
If [Bordered] is set, the date might be imprinted on the border, depending on the printer.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
•
When you set the index, you changed the paper setting before resuming the printing.
• When you paused the printing, the card’s remaining capacity was low.
If a problem occurs during printing, see page 162.
Download from Www.Somanuals.com. All Manuals Search And Download.
166
d
Transferring Images to a Personal Computer
By connecting the camera to a personal computer, you can transfer
images from the camera’s card by operating the camera. This feature is
called direct image transfer.
Before connecting the camera to a personal computer, be sure
to install the provided software (EOS DIGITAL Solution Disk
on CD-ROM) in the personal computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
Preparation for Image Transfer
Set the camera’power switch to
<2>.
1
Cone cama to the
2 permpute
Usterface cable provided with
he cera.
hen nnecting the cable plug to
camera’s <D> terminal, the
ble plug’s <D> icon must face the
front side of the camera.
Connect the plug on other end of the
cable to the personal computer’s
USB port.
Set the camera’s power switch to
3 <1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
X The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera’s LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
167
dTransferring Images to a Personal Computer
If the [EOS Utility] screen does not appear, see Software Instruction
Manual in the CD-ROM.
Before disconnecting the cable, turn off the camera. Pull out the cable by
grasping the plug (instead of the cord).
Transferring Images to a Personal Computer
The images sent to the personal computer will be saved in the [My
Pictures] folder or [Pictures] folder in subfolders organized according
to the shooting date.
All images
This is to transfer almages in the
card to onal couter.
Seleages], thpress the
<ln.
<l> button’s blue lamp will
and e image transfer will start.
the image transfer is
eted, the lamp will stay on.
Since movie files are larger than still photo files, they will take longer to
transfer.
During the file transfer, do not disconnect the cable.
Shooting will be disabled while the direct transfer screen is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
168
dTransferring Images to a Personal Computer
Options other than [All images] are explained below. To start the image
transfer, press the <l> button.
New images
Images which have not yet been transferred to the personal
computer will be selected by the camera automatically and
transferred.
Transfer order images
You select the images and they are transferred to the personal
computer in a batch. To select the images, see page 170.
Select & transfer
You select thagindividually to be
transfer. To exess the <M>
but
Wallpapr
The imae you select anfer will appear as the personal
computewallpap. To exit, press the <M> button.
If you press <0> instead of the <l> button, a confirmation dialog
will appear. Select [OK], then press <0> to start the transfer.
RAW images and movies cannot be transferred as wallpaper.
Download from Www.Somanuals.com. All Manuals Search And Download.
169
dTransferring Images to a Personal Computer
3Selecting the Images to be Transferred
Under the [3] tab, you can use
[Transfer order] to select the images to
be transferred to a personal computer.
When you select [Transfer order
images] on page 169, you can transfer
the images set by the transfer order.
Sel.Image
Select and order images e by one. Press
<0
> to include thspled image in the
transfer ordhe < > will also appear
on the fter comting the
transfer s the < > button to
the trorder to the card.
X
M
Byn
Select [Bynselecl the iages in the folder will then
be included the transfer select Clear all and a folder, the
transfer ordfor all the imagee folder will be canceled.
All image
When you select age, all the images in the card will be
included in the transfer order. If you select Clear all, the transfer
order for all the images in the card will be canceled.
Do not put into the camera any images whose transfer order was set by a
different camera and then try to specify another transfer order. The images
in the transfer order might all be overwritten. Also, depending on the image
type, the transfer order may not be possible.
For the transfer order, if you select an image captured in the RAW+JPEG
mode, it will be counted as one image. During the direct image transfer, both
the RAW and JPEG images will be transferred to the personal computer.
If you want to transfer more than 999 images in one batch, select [All
images] on the direct transfer screen (p.168).
Download from Www.Somanuals.com. All Manuals Search And Download.
170
10
Customizing the
Camera
With Custom Functions, you cae the cara
functions according trefere. Also, the
current camera settisavd under the Mode
Dial’s <w>, x>, aositis.
The featurs explaineapter can be set and
used in thollowing shomodes: d, s, f, a,
F.
Download from Www.Somanuals.com. All Manuals Search And Download.
171
3Setting Custom FunctionsN
Select [8].
Turn the <6> dial to select the [8]
1
tab.
Select the group.
Turn the <5> dial to select C.Fn I -
IV, then press <0>.
2
Select the Custom Function
Custom Function No.
3 number.
Turn the <5> dial tselect the
Custom Function Nthen press
<0>.
Changetting s desired.
4
5
Turn dial to sect the
etting ber), then press <0>.
eat ps 2 to 4 if you want to set
Cusm Functions.
bottom of the screen, the
nt Custom Function settings are
indicated below the respective
function numbers.
Exit the setting.
Press the <M> button.
X The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
Even after all the Custom Functions are cleared, the setting for [8C.Fn IV -
5: Focusing Screen] will remain unchanged.
Download from Www.Somanuals.com. All Manuals Search And Download.
172
3 Custom FunctionsN
LV Movies
e
LV Stills
C.Fn I: Exposure
1
2
3
4
5
6
7
Exposure level increments
ISO speed setting increments
ISO expansion
k
k
k
p.174
p.175
Bracketing auto cancel
Bracketing sequence
Safety shift
k
k
k
k
Flash sync. speed in Av mode
C.Fn II: Image
1
2
3
4
Long exposure noise reduction
p.176
High ISO speed noise reduction
Highlight tone priority
k
k
Auto Lighting Optimizer
C.Fn III: Autofocus/Driv
1
2
3
4
5
6
7
8
Lens drive when AF
Lens AF stop button
AF poinelecn me
Superiosed display
AF-assbeam firing
k
p.1
p.179
(2, 3 & 5 work/*)
k (Quick mode)
k (Quick mode)
Mirror locp
p.180
p.181
AF point arxpion
AF Microadjustment
k (Quick mode)
C.Fn IV: Operation/Others
1
2
3
4
5
6
Shutter button/AF-ON button
AF-ON/AE lock button switch
Assign SET button
(3 works/*)
p.182
p.183
k
(5 & 6 do not work)
Dial direction during Tv/Av
Focusing screen
k
p.184
p.185
Add original decision data
k
* Disabled in movie mode
Shaded Custom Functions do not function during Live View (LV) still photo
and/or movie shooting. (Settings are disabled.)
Download from Www.Somanuals.com. All Manuals Search And Download.
173
3
Custom Function SettingsN
C.Fn I: Exposure
C.Fn I -1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
The exposure level will be displayed in the viewfinder and on the LCD
panel as shown below.
C.Fn I -2 ISO speed setting nts
0: 1/3-stop
1: 1-stop
C.Fn I -3 exp
0: Off
1: On
Enables “L” (uivalent ISO 50), “H1” (equivalent to ISO 12800), and
“H2” (equivalenISO 5600) to be selectable for the ISO speed.
C.Fn I -4 Bracketing auto cancel
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
Download from Www.Somanuals.com. All Manuals Search And Download.
174
3Custom Function SettingsN
C.Fn I -5 Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
WB Bracketing
AEB
B/A Direction
M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
-
:
:
Decreased exposure - : Blue bias
Increased exposure + : Amber bias
- : Magenta bias
+ : een bias
+
C.Fn I -6 Safety shift
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE d apertureriority AE (f)
modes. When the subhtneanges erratically and the
correct autoexposure btaid, the camera will change the
exposure setting autbtain correct exposure.
C.Fn I 7 Flash sd in Av mode
0: Auto
1: 1/200-1/60 ec. aut
When flash is ith aperture-priority AE (f), this prevents a slow
flash-sync speed from being used in low-light conditions. Effective for
preventing subject blur and camera shake. The only problem is that,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This better prevents subject
blur and camera shake than with setting 1. However, the background will
come out darker than with setting 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
175
3Custom Function SettingsN
C.Fn II: Image
C.Fn II -1 Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. The
[On] setting may be effective for noise that cannot be etected or
reduced with the [Auto] setting.
With setting 1 and 2, after the picture is ten, the eduction
process may take the same amount the expre. During the
noise reduction, shooting is still posg as the mimum burst
indicator in the viewfinder sws “1” o
With setting 2, if a long usering Live View shooting,
“BUSY” will be displaye Viedisplay will not appear untill
the noise redon proted. (u cannot take another
picture.)
C.Fn II -2 High ISspeed noise reduction
Reduces the noise nerd in the image. Although noise reduction is
applied at all ISO speeds, it is particularly effective at high ISO speeds. At
low ISO speeds, the noise in the shadow areas is further reduced. Change
the setting to suit the noise level.
0: Standard
1: Low
2: Strong
3: Disable
With setting 2, the maximum burst for continuous shooting will greatly
decrease.
Download from Www.Somanuals.com. All Manuals Search And Download.
176
3Custom Function SettingsN
C.Fn II -3 Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highlights. The gradation between the grays
and highlights becomes smoother.
With setting 1, noise in the shadow areas may be slightly more than usual.
With setting 1, the settable ISO speed range will be 200 - 6400.
Also, <A> (dynamic range) will be displayed on thCD panel and in the
viewfinder.
C.Fn II -4 Auto Lighting Ozer
If the images comes out dark or the
low, the brightness and cont are c
automatically.
For RAW images, the csettiin
the camera can be appliesseith
Digital PhotProfesionatware).
0: Standar
Ð
1: Low
2: Strong
3: Disable
Depending on the shooting conditions, noise might increase.
This function will not work if manual exposure or bulb exposure has been
set.
In fully-automatic modes (1/C), [Standard] will be set automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
177
3Custom Function SettingsN
C.Fn III: Autofocus/Drive
C.Fn III -1 Lens drive when AF impossible
If autofocus is executed, but focus cannot be achieved, the camera can
either keep trying to focus or stop.
0: Focus search on
1: Focus search off
Prevents the camera from becoming grossly out of focus as it attempts
to focus again. Especially convenient with super telephoto lenses which
can become extremely out of focus.
C.Fn III -2 Lens AF stop button function
* The AF stop button is provided only on super teleto enses.
0: AF stop
1: AF start
AF operates only while the buton is phile the bon is
pressed, AF operation wiera abled.
2: AE lock
When the buttos pressappld. Convenient when you
want to focuand meter ats of the picture.
3: AF point: M 9 Auto/Auto
In the manuAF point selection mode, the button instantly switches to
automatic AF int seleon only while you hold it down. This is
convenient in thI So AF mode when you can no longer track the
subject with the manually-selected AF point. In the automatic AF point
selection mode, the button selects the center AF point only while you
hold it down.
4: ONE SHOT z AI SERVO
In the One-Shot AF mode, the camera switches to AI Servo AF mode
only while you hold down the button. And in the AI Servo AF mode, the
camera switches to One-Shot AF mode only while you hold down the
button. Convenient when you need to keep switching between One-Shot
AF and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already <ON>, the Image Stabilizer operates
when you press the button. With setting 5, the Image Stabilizer will not
operate when you press the shutter button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
178
3Custom Function SettingsN
C.Fn III -3 AF point selection method
0: Normal
Press the <S> button, then use <9> or <6/5> dial to select an AF
point.
1: Multi-controller direct
Without pressing the <S> button first, you can just use the <9> to
select the desired AF point. Pressing the <S> button will set it to
automatic AF point selection.
2: Quick Control Dial direct
Without pressing the <S> button first, you can just use the <5> to
select the desired AF point. By holding down the S> button and
turning the <6> dial, you can set the exposure mpensation.
C.Fn III -4 Superimposed display
0: On
1: Off
When focus is achievpoinot flash in red in the
viewfinder. Recommit is hersome to see it light up.
The AF point will still u selt it.
C.Fn I-5 AF-asfiring
Enables or ables the EOS-dedicated Speedlite’s AF-assist beam.
0: Enable
1: Disable
The AF-assist beam is not emitted.
If the external, EOS-dedicated Speedlite’s [AF-assist beam firing] Custom
Function is set to [Disabled], the Speedlite will not emit the AF-assist beam
even if the camera’s C.Fn III -5-0 is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
179
3Custom Function SettingsN
C.Fn III -6 Mirror lockup
0: Disable
1: Enable
Prevents camera vibrations caused by the reflex mirror action which can
disturb shooting with super telephoto lenses or close-up (macro)
shooting. See page 101 for the mirror lockup procedure.
C.Fn III -7 AF point area expansion
0: Disable
1: Enable
When you select AI Servo AF and the center AF poinhe six Assist AF
points (p.80) will also function. Seven AF pointill trk the subject.
This is effective for subjects that move erratically, g it difficult for
only the center AF point to track it.
Download from Www.Somanuals.com. All Manuals Search And Download.
180
3Custom Function SettingsN
C.Fn III -8 AF Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
correct focusing from being achieved. AF adjustment cannot be
done during Live View shooting in Live and Liveu modes.
You can make fine adjustments for the AF’s
point of focus. It can be adjusted in ±20 steps
(-: Forward / +: Backward).
The adjustment amount of one step varies
depending on the maximum aperture of the lens.
Adjust, shoot (73), and heck the focus.
Repeat to adjust the AF’oint of focus.
With setting 1 or 2 selected, press the <B> on view the register
screen. To cancel all the registered adjustments, he <L> button.
0: Disable
1: Adjust all by same amount
The same adjustment is ap
all lenses.
2: Adjust bens
An adjustmt can bet individually for any
particular lendjuents for up to 20 lenses
can be registered in the camera. When a lens
whose focus adjustment has been registered
is attached to the camera, its point of focus will
be shifted accordingly.
If adjustments for 20 lenses have already been registered and you want to
register an adjustment for another lens, select a lens whose adjustment can
be overwritten or deleted.
It is best to make the adjustment at the actual place to be photographed.
This will make the adjustment more precise.
With setting 2, if an Extender is used, the adjustment will be registered
for the lens and Extender combination.
The registered AF microadjustments will be retained even if you use the Custom
Function to clear all settings (p.172). However, the setting itself will be [0: Disable].
Download from Www.Somanuals.com. All Manuals Search And Download.
181
3Custom Function SettingsN
C.Fn IV: Operation/Others
C.Fn IV -1 Shutter button/AF-ON button
0: Metering + AF start
1: Metering + AF start/AF stop
During autofocusing, you can press the <p> button to stop the
autofocusing.
2: Metering start/Metering + AF start
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <p> button to start or
stop the AI Servo AF operation. The exposure is set he moment the
picture is taken. Thus, the optimum focusing anexpure will always
be achieved as you wait for the decisive momen
3: AE lock/Metering + AF start
Convenient when you want to focus at differeparts of the
picture. Press the <p> button to d autofocand press
the shutter button halfway AE l
4: Metering + AF start/Dis
The <p> button wi
C.Fn IV -AF-ON/Atton switch
0: Disable
1: Enable
The functions of thp> and <A/y> buttons will be switched
with each other’s function.
When set to 1, press the <p> button to display the image index or to
reduce the image display.
Download from Www.Somanuals.com. All Manuals Search And Download.
182
3Custom Function SettingsN
C.Fn IV -3 Assign SET button
You can assign a frequently-used function to <0>. When the camera is
ready to shoot, you can press <0>.
0: Normal (disabled)
1: Image quality
Press <0> to display the image-recording quality setting screen on the
LCD monitor. Turn the <6> or <5> dial to set the desired image-
recording quality, then press <0>.
2: Picture Style
Press <0> to display the Picture Style selection screen on the LCD
monitor. Turn the <6> or <5> dial to select a Pture Style, then
press <0>.
3: Menu display
Gives the same function as the <Mbutton
4: Image replay
Gives the same function as the <.
5: Quick Control screen
When you press <0Col screen will appear. Use <9>
to select the function<5or <6> dial to set it.
6: Record mLive
If the [6ive View/Moet.] menu has been set to enable
movie soting (p.121), pr0> to start shooting a movie when the
camera ieady to sot.
C.Fn IV -4 direction during Tv/Av
0: Normal
1: Reverse direction
The dial’s turning direction for setting the shutter speed and aperture
can be reversed.
In the manual exposure mode, the direction of the <6> and <5>
dials will be reversed. In other shooting modes, the <6> dial will be
reversed. The direction of the <5> dial will be the same in the manual
exposure mode and for setting exposure compensation.
Download from Www.Somanuals.com. All Manuals Search And Download.
183
3Custom Function SettingsN
C.Fn IV -5 Focusing Screen
If you change the focusing screen, change this setting to match the
focusing screen type. This is to obtain the correct exposures.
0: Eg-A
1: Eg-D
2: Eg-S
About focusing screen characteristics
Eg-A: Standard Precision Matte
Standard focusing screen that comes with the camera. Provides
good viewfinder brightness and enables easy manual focusing.
Eg-D: Precision Matte with grid
This is the Eg-A with a grid. It makes
it easier to align horizontal or verl
lines.
Eg-S: Super Precision
Focusing screen manfocusing easier than with
the E-A. Eectivo mainly focus manually.
About SupPrecision MattS and Maximum Lens Aperture
This focusscreen ptimized for f/2.8 and faster lenses.
If the lens is wer tf/2.8, the viewfinder will look darker than with
Eg-A.
Even if all the Custom Functions are cleared, this setting will be retained.
Since the standard Eg-A focusing screen comes with the camera, C.Fn
IV -5-0 is already factory set.
To change the focusing screen, refer to the instructions that come with
the focusing screen.
The C.Fn IV -5 setting is not included in the registered camera user
settings (p.187).
Download from Www.Somanuals.com. All Manuals Search And Download.
184
3Custom Function SettingsN
C.Fn IV -6 Add original decision data
0: Off
1: On
Data for verifying whether the image is original or not is appended to the
image automatically. When the shooting information of an image
appended with the verification data is displayed (p.129), the <L> icon
will appear.
To verify whether the image is original, the Original Data Security Kit
OSK-E3 (sold separately) is required.
The images are not compatible with the image encryption/decryption
features of Original Data Security Kit OSK-E3.
Download from Www.Somanuals.com. All Manuals Search And Download.
185
3
Registering My MenuN
For faster access, you can register up to six menus and Custom
Functions whose settings you change frequently.
Select [My Menu settings].
1
Under the [9] tab, select [My Menu
settings], then press <0>.
Select [Register].
2
Turn the <5> dial to select
[Register], then press <0>.
Register the desireitems.
3
Turn the <5al select the item,
then pr<0>.
Whfirmatioialog
appeou selecK] and
ess , the menu will be
tere
an rester up to six items in My
turn to the screen in step 2,
press the <M> button.
About My Menu ings
Sort
You can change the order of the registered menu items in My Menu.
Select [Sort] and select the menu item whose order you want to
change. Then press <0>. With [z] displayed, turn <5> to change
the order, then press <0>.
Delete / Delete all items
Deletes the registered menu items. [Delete] deletes one menu item
at a time, and [Delete all items] deletes all menu items.
Display from My Menu
When [Enable] is set, the [9] tab will be displayed first when you
display the menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
wRegister Camera User SettingsN
Under the Mode Dial’s <w>, <x>, and <y> positions, you can
register most of the current camera settings including your preferred
shooting mode, menus, Custom Function settings, etc.
Select [Camera user setting].
1
Under the [7] tab, select [Camera
user setting], then press <0>.
Select [Register
2
Turn the <dto select
[Rer], then ss <0>.
Regdesireitems.
3
Tur<5> dial to select the Mode
Dial sition where the camera
ttingre to be registered, then
ss <0>.
hen the confirmation dialog
appears, select [OK] and press
<0>.
X The current camera settings (p.190)
will be registered under the Mode
Dial’s C* position.
About Camera user setting’s [Clear settings]
In step 2, if you select [Clear settings], the respective Mode Dial
position will revert to the default setting effective before you registered
the camera settings. The procedure is the same as step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
187
wRegister Camera User SettingsN
Settings Registered
Shooting functions
Shooting mode + setting, ISO speed, AF mode, AF point, Metering
mode, Drive mode, Exposure compensation amount, Flash
exposure compensation amount
Menu Functions
[1] Quality, Beep, Shoot w/o card, Review time, Peripheral
illumination correction
[2] Exposure compensation/AEB, White balance, Custom WB,
WB SHIFT/BKT, Color space, Picture Style
[4] Highlight alert, AF point display, Historam, ide show,
Image jump w/6
[5] Auto power off, Auto rotate, Fbering
[6] LCD brightness, Sensor cleo cleani), Live View/
Movie function settin
[7] INFO. button, Exedliontrol
[8] Custom Functio
The My Menu settings will not be registered.
When the Mode Dial is set to the <w>, <x>, or <y> position, the [7
Clear settings] and [8Clear all Custom Func. (C.Fn)] menus will not
work.
Even when the Mode Dial is set to the <w>, <x>, or <y> position,
you can still change the drive mode and menu settings. If you want to
register those changes, follow the procedure on the preceding page.
By pressing the <B> button, you can check which shooting mode is
registered under the <w>, <x>, and <y> positions (p.190).
Download from Www.Somanuals.com. All Manuals Search And Download.
188
11
Refernce
This chapter provides reference tion for mera
features, system acc, etce back of this
chapter also has an ake easier to look up
needed information.
Download from Www.Somanuals.com. All Manuals Search And Download.
189
B Checking Camera Settings
When the camera is ready to shoot, press the <B> button and
“Camera settings” and “Shooting functions” screens will appear.
When “Shooting functions” is displayed, you can set the shooting
functions while looking at the LCD monitor.
Display “Camera set.” and
“Shoot. func.”
Press the <B> button.
X The button toggles between the two
screens.
Display one of the
Under the [7b, ect [INFO.
buttonen pres0>.
Sera set.] [Shoot.
funcess <0
Camera Settings
Shooting mode registered under
the Mode Dial’s w, x, and y
positions
(p.76)
(p.68, 69)
(p.67)
Auto rotate display (p.146)
Transfer of some images failed*
(p.29, 55)
Date/Time (p.42)
Auto power off (p.44)
* This icon is displayed only when the transfer of some images failed while using
the Wireless File Transmitter WFT-E4/E4A.
Download from Www.Somanuals.com. All Manuals Search And Download.
190
B Checking Camera Settings
Shooting Functions
AE lock
Aperture
Shutter speed
Picture Style
ISO speed
Highlight tone priority
Exposure level/
Flash exposure
compensation
AEB range
Shooting mode
AF point
Metering mode
e mode
Image-recording
quality
Sts remaining
White bnce
Quick Control icon
Battery check
White balance co
AF mode
Maximum burst
When yopre<9wn, the Quick Control screen
appears p.38).
If you prs the <m>, <o>, <n>, or <S> button,
the setting creen appear on the LCD monitor and you can turn
the <6> or dial to set the respective function. You can also
select the AF point with <9>.
If you turn off the power while the “Shooting settings display” screen is
displayed, the same screen will be displayed when you turn on the power
again. To avoid this, press the <B> button to turn off the display on the
LCD monitor, then turn off the power switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
191
3Checking the Battery Information
You can check the battery’s condition on the LCD monitor. The Battery
Pack LP-E6 has a unique serial No., and you can register multiple
battery packs to the camera. When you use this feature, you can check
the registered battery pack’s remaining capacity and operation history.
Select [Battery info.].
Under the [7] tab, select [Battery
info.], then press <0>.
X The battery info screen will appear.
Battery position
Model of the battery or household power
source being used.
Remaining batteracitisplayed by the
battery check display 1% increments.
Shutteshots tawith the
currene numbereset when
the battarged.
ry’s rarge performance level is
ed in ne of three levels.
een): ttery’s recharge
performance is fine.
een): Battery’s recharge performance
is slightly degraded.
(Red): Purchasing a new battery is
recommended.
Do not use any battery other than the Battery Pack LP-E6. Otherwise, the
camera’s full performance may not be attained or malfunction can result.
If you use two LP-E6 battery packs in the Battery Grip BG-E6, battery
information for the two battery packs will appear.
When size-AA/LR6 batteries are used in the Battery Grip BG-E6, only
the battery check display will be displayed.
If for some reason, communication with the battery is not successful, the
battery check display will show <
> on the LCD panel and in the
viewfinder. [Cannot communicate with battery] will be displayed. Just
select [OK] and you can continue shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
192
3Checking the Battery Information
Registering the Battery to the Camera
You can register up to six Battery Pack LP-E6’s to the camera. To
register multiple battery packs to the camera, do the procedure below
for each battery pack.
Press the <B> button.
1
With the Battery info. screen
displayed, press the <B> button.
X The battery history screen will
appear.
X If the battery haot been registered,
it will be grd .
Selegister]
2
T5> dial select
[R, then press <0>.
The nfirmation dialog will appear.
Select [OK].
Turn the <5> dial to select [OK],
3
then press <0>.
X The battery pack will be registered,
and the battery history screen will
reappear.
X The grayed out battery will now be
displayed in white letters.
Press the <M> button. The
Battery info. screen will reappear.
Battery registration is not possible if size-AA/LR6 batteries are in the
Battery Grip BG-E6 or if you use the AC Adapter Kit ACK-E6.
If six battery packs have already been registered, [Register] cannot be
selected. To delete unnecessary battery information, refer to page 195.
Download from Www.Somanuals.com. All Manuals Search And Download.
193
3Checking the Battery Information
Labeling the Serial No. on the Battery
Affixing the serial No. onto all the registered Battery Pack LP-E6’s with
a label makes it convenient.
Write the serial No. on a label.
Serial No.
1
Write the serial No. displayed on the
battery history screen on a label
about 25 mm x 15 mm / 1.0 in. x
0.6 in. in size.
Take oubatternd affix the
a81a5900
2 label.
Set thswitch to 2>.
en thattery compartment cover
emothe battery.
he label as shown (side with no
cal contacts) in the illustration.
Repeat this procedure for all of your
battery packs so you can easily see
the serial No.
Do not affix the label on any part other than as shown in the illustration in
step 2. Otherwise, the misplaced label might make it difficult to insert the
battery or impossible to turn on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
194
3Checking the Battery Information
Checking the Remaining Capacity of a Registered Battery Pack
You can check the remaining capacity of any battery pack (even while
not installed) and also when it was last used.
Date last used
Look for the serial No.
Serial No.
Refer to the battery’s serial No. label
and look for the battery’s serial No. on
the battery history screen.
X You can check the respective battery
pack’s remaining capacity and the
date when it waast used.
Remaining capacity
Deleting the Registered Battk Informion
1 Select [Delete ba.].
Follow step 2 on sel[Delete battery info.], then
press 0>.
2 Select e battery pabe deleted.
Turn t<5> l to select the battery pack to be deleted, then
press <0
X <X> will appear.
To delete another battery pack, repeat this procedure.
3 Press the <L> button.
X The confirmation dialog will appear.
4 Select [OK].
Turn the <5> dial to select [OK], then press <0>.
X The battery pack information will be deleted, and the screen in
step 1 will reappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
195
Using a Household Power Outlet
With the AC Adapter Kit ACK-E6 (sold separately), you can connect the
camera to a household power outlet and not worry about the battery
level.
Connect the DC plug.
Connect the DC Coupler’s plug to the
1
AC adapter’s socket.
Connect the power cord.
2
Connect the power rd as shown in
the illustration
After uthe ca, unplug the
pom the per outlet.
ce thd in the groove.
3
rt thord carefully without
ging e cord.
Insert the DC Coupler.
4
Open the battery compartment cover
and open the DC Coupler cord notch
cover.
Insert the DC Coupler securely until it
locks and put the cord through the
notch.
DC coupler cord hole
Close the cover.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1> or <J>.
Download from Www.Somanuals.com. All Manuals Search And Download.
196
Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera’s date and time.
Its service life is about 5 years. If you turn on the power and the date/
time is reset, replace the back-up battery with a new CR1616 lithium
battery as described below.
The date/time setting will also be reset, so be sure to set the
correct date/time (p.42).
Set the power switch to <2>.
1
Unscrew the battery holder
2 screw.
Use a smPhilscrewdriver.
Be careful nose the screw.
Take battery older.
3
Pusut the battery in direction d.
Replace the battery in the battery
4 holder.
Make sure the battery is in the proper
+ – orientation.
Tighten the battery holder screw.
5
For the date/time battery, be sure to use a CR1616 lithium battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
197
Function Availability Table
o: Set automatically k: User selectable
: Not selectable
Mode Dial
JPEG
1
k
k
k
o
C
k
k
k
o
d
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
s
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
f
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
a
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
F
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Quality
RAW
RAW+JPEG
Auto
ISO speed
Manual
Standard
o
k
k
k
Portrait
Landscape
Neutral
Picture
Style
Faithful
Monochrome
User Defined
Auto
o
Pet WB
Cum WB
Color teraturetting
WB correction
WB bracketing
sRGB
White
balance
o
o
Color
space
Adobe RGB
Auto Lighting Optimizer
o
k
o
k
Peripheral illumination correction
Long exposure noise reduction
High ISO speed noise reduction
Highlight tone priority
k
k
k
k
k
k
k
k
o
o
Download from Www.Somanuals.com. All Manuals Search And Download.
198
Function Availability Table
o: Set automatically k: User selectable
: Not selectable
Mode Dial
One-Shot
AI Servo
AI Focus
1
C
d
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
s
k
k
k
k
k
k
f
k
k
k
k
k
k
k
k
k
a
k
k
k
k
k
k
k
k
k
F
k
k
k
k
k
k
k
k
k
AF
o
o
o
o
Auto
AF point
selection
Manual
Evaluative
Partial
o
o
Metering
mode
Spot
Center-weighted average
Program shift
Exposure com
k
k
k
k
k
k
k
k
k
k
k
k
Exposure AEB
E lo
k
Depth-of-field pre
ngle shog
k
k
k
k
k
k
o
k
k
k
Coshooting
10 sec. self-timer/
Remote control
D r i v e
k
k
k
k
k
k
2 sec. self-timer/
Remote control
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
FE lock
External
Speedlite
Flash exposure
compensation
Flash control
Stills only
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Live View
shooting
Stills+movie
k
k
Download from Www.Somanuals.com. All Manuals Search And Download.
199
Menu Settings
1Shooting 1 (Red)
Page
54
73 / 83 / 74 / 84 / 76 / 86
1 / D1 / D2
On / Off
Quality
Beep
–
Shoot w/o card
Review time
On / Off
29
Off / 2 sec. / 4 sec. / 8 sec. / Hold
145
Peripheral illumination
correction
Enable / Disable
70
2Shooting 2 (Red)
Exposure
compensation/AEB
1/3-stop increments, ±2 stops
97
Q / W / E / R / Y / O / P
(2500 - 10000)
White balance
Custom WB
65
66
Manual setting nce
WB coion: Wce correction
WBbalbracketing
68
69
WB SHIFT/BKT
Color space
sRGB
76
PQPortrait / RLandscape /
Picture Style
SFaithful / VMonochrome / 59-64
WUse1, 2, 3
Dust Delete Dat
Oins data to be used to erase dust spots
149
3Playback 1 (Blue
Protect images
Rotate
Erase-protect images
141
134
142
163
Rotate vertical images
Erase images
Erase images
Print order
Specifies images to be printed (DPOF)
Select images to be transferred to a personal
computer
Transfer order
170
–
Displayed when external media is used via
WFT-E4/E4A (sold separately)
External media backup
The shaded menu items are not displayed in the fully-automatic modes (1/
C).
Download from Www.Somanuals.com. All Manuals Search And Download.
200
Menu Settings
4Playback 2 (Blue)
Highlight alert
Page
129
129
130
Disable / Enable
Disable / Enable
Brightness / RGB
AF point display
Histogram
Select the images, set the Play time and
repeat settings for automatic playback
Slide show
135
1 image / 10 images / 100 images / Screen /
Date / Folder / Movies / Stills
132
Image jump w/6
5Set-up 1 (Yellow)
1min. / 2 min. / 4 min. / 8 min5 min. / 30
min. / Off
Auto power off
44
Auto rotate
Format
OnzD / OnD / Off
146
43
Initialize and a in the d
Continuous / Manual et
Cnd sellder
File numbering
Select folder
74
72
hen T-E4/E4A (sold separately)
WFT settings
–
–
Recording fctio
media sele
n external media is used via
W(sold separately)
6Set-up 2 ellow)
Auto: Adjustable to one of three brightness levels
Manual: Adjustable to one of seven brightness levels
LCD brightness
144
42
Set the date (year, month, day) and time (hour,
min., sec.)
Date/Time
Language
25 languages
42
Video system
NTSC / PAL
139
Auto cleaning: Enable / Disable
Clean now
148
151
Sensor cleaning
Clean manually
LV func. setting* / Silent shooting / Metering timer
Live View/Movie
function settings
108
Grid display / AF mode / Movie recording size /
Sound recording
* In the <1/C> modes, the option will change to [Movie recording].
Download from Www.Somanuals.com. All Manuals Search And Download.
201
Menu Settings
7Set-up 3 (Yellow)
Page
192
Type, Remaining capacity, Shutter count,
Recharge performance, Battery registration,
Battery history
Battery info.
Normal display / Camera settings / Shooting
function
INFO. button
190
105
187
External Speedlite
control
Flash function settings / Flash C.Fn settings /
Clear all Speedlite C.Fn’s
Register current camera settings to the Mode
Dial’s w, x, or yposition
Camera user setting
Clear all camera settings / Delete pyright
information
Clear settings
Firmware Ver.
45
–
For updating the firmware
8Custom Functions (Orange)
C.Fn I : Exposure
174
176
C.Fn II : Image
C.Fn III : Autofocus/
Cumera desired
178
182
172
Drive
C.Fn IV : Operaon/
Other
Clear all Custom
Functions (C.Fn)
Crs all Custom Function settings
9My Menu (Green)
Register frequently-used menu items and
Custom Functions
My Menu settings
186
Download from Www.Somanuals.com. All Manuals Search And Download.
202
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power-Related Problems
The battery cannot be recharged with the battery charger provided.
Do not recharge any battery pack other than genuine Canon Battery
Pack LP-E6.
The charger’s lamp blinks at high speed.
If there is a problem with the battery chargor tery pack or if
communication with the battery pon-Canattery packs) is not
possible, the protective circuit te the cging and the
orange lamp will blink quickly at nterval. If re is a problem
with the battery chattery , unplug the charger’s power
plug from the powech areattach the battery pack to the
charger. it 2 to n recnect the power plug to the
power utlet. If the psts, contact your dealer or nearest
Canoervice Center.
The chargelamoes not blink.
If the internal temperature of the battery pack attached to the charger
is high, the charger will not charge the battery for safety reasons (lamp
off). During the charging, if the battery’s temperature becomes high for
any reason, the charging will stop automatically (lamp blinks).When
the battery temperature goes down, the charging will resume
automatically.
The camera does not operate even when the power switch is set to <
1>.
The battery is not properly installed in the camera (p.26).
Recharge the battery (p.24).
Make sure the battery compartment cover is closed (p.26).
Make sure the card slot cover is closed (p.29).
Download from Www.Somanuals.com. All Manuals Search And Download.
203
Troubleshooting Guide
The access lamp still blinks even when the power switch is
set to <2>.
If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. When the image recording is
completed, the power will turn off automatically.
The battery becomes exhausted quickly.
Use a fully-charged battery (p.24).
The battery performance might be degraded. See te [7Battery
info.] menu to check the battery’s performance levp.192). If the
battery performance is poor, replace the battwitnew one.
If you keep displaying the Quick Coneen (p.or shooting with
Live View function (p.107) for a priod, the mber of
possible shots will decrease.
The camera turns off b
Auto poweff n effnot want auto power off to take
effect, sehe [5Auto menu to [Off].
Shooting-Reled Poblems
No images can be shot or recorded.
The card is not properly inserted (p.29).
If the card is full, replace the card or delete unnecessary images to
make room (p.29, 142).
If you try to focus in One-Shot AF mode while the focus confirmation
light <o> in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to focus, or focus manually (p.35, 84).
Download from Www.Somanuals.com. All Manuals Search And Download.
204
Troubleshooting Guide
The image is out of focus.
Set the lens focus mode switch to <AF> (p.31).
To prevent camera shake, hold the camera still and press the shutter
button gently (p.34, 35).
If the lens has an Image Stabilizer, set the IS switch to <1>.
The card cannot be used.
If a card error message is displayed, see page 30 or 209.
The maximum burst during continuous shting is lower.
Set [8C.Fn II -2: High ISO speed noise ron] to one of the
following settings: [Standard/Lole]. If it et to [Strong], the
maximum burst will greatly dec76).
If you shoot a subject h has etails (field f grass, etc.), the
file size will be largmaxim burst will be lower as
mentioned on pag
ISO 100 cnnot be se
If [8Cn II -3: Hihlight tone priority] is set to [Enable], the
settable O speeange will be ISO 200 - 6400. When [Disable] is
set, you cay ISO speed (p.177).
When I use the <f> mode with flash, the shutter speed
becomes slow.
If you shoot night scenes, the shutter speed becomes slow
automatically (slow-sync shooting) so that both the subject and
background are properly exposed. If you do not want a slow shutter
speed to be set, set [8C.Fn I -7: Flash sync. speed in Av mode] to
1 or 2 (p.175).
Download from Www.Somanuals.com. All Manuals Search And Download.
205
Troubleshooting Guide
The flash does not fire.
Make sure the flash (or PC sync cord) is securely attached to the
camera.
If you use a non-Canon flash with Live View shooting, set [Silent
shoot.] to [Disable] (p.104).
The flash always fires at full output.
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.103).
When the [Flash metering mode] flash Custom Fction is set to
[TTL (autoflash)], the flash will always be firt foutput (p.106).
Flash exposure compensation cset.
If flash exposure compension has been set wh the
Speedlite, flash expossatiannot be set with the
camera. When the Spexpure compensation is set to
0, flash expcombe swith the camera.
Live View soting is not pble.
For Live Vieshootinuse a memory card (a hard disk-type card is not
recommendeddisk-type card requires a lower temperature
range for operation than normal memory cards. If the temperature gets
too high, the Live View shooting may stop temporarily to prevent damage
to the card’s hard disk. When the camera’s internal temperature
decreases, you can resume Live View shooting (p.112).
I cannot take still photos at the shutter speed, aperture or ISO
speed I set during Live View shooting.
Set [Screen settings] to [Stills display] or [Exposure simulation]
(p.109).
Download from Www.Somanuals.com. All Manuals Search And Download.
206
Troubleshooting Guide
The movie shooting quits by itself.
If the card’s writing speed is slow, movie shooting may stop
automatically. Use a card with a read/write speed of at least 8 MB per
sec. To find out the card’s read/write speed, see the card
manufacturer’s Web site.
If the movie file size reaches 4 GB or if the movie is shot for 29 min. 59
sec., the movie shooting will stop automatically.
When the movie is played, camera operation noise can be heard.
If you operate the camera’s dial or lens during vie shooting, the
operation noise will also be recorded. Usernal microphone
(commercially available) (p.123).
Display & Operatioblem
The LCD moitor dlay clear image.
If dusadhering to tnitor, wipe its surface with a lens cloth
or sofoth.
In low oigh temratures, the LCD monitor display may seem slow
or might loblaIt will return to normal at room temperature.
Few tabs and options are displayed on the menu screen.
In the fully-automatic modes (1/C), some tabs and options are not
displayed. Set the shooting mode to d/s/f/a/F (p.40).
Part of the image blinks in black.
The [4Highlight alert] option is set to [Enable] (p.129).
A red box is displayed on the image.
The [4AF point disp.] option is set to [Enable] (p.129).
Download from Www.Somanuals.com. All Manuals Search And Download.
207
Troubleshooting Guide
The image cannot be erased.
If the image has been erase-protected, it cannot be erased (p.141).
The file name’s first character is an underscore (“_MG_”).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.76).
The file numbering does not start from 0001.
If you use a card which already has images record, the file
numbering might start from the last image in the ca(p.74).
The shooting date and time displas incot.
The correct date and time has not p.42).
No image appears on een
Make sure the stereo HDMcable’s plug is connected
all the wan (p.139,14
Set the vo OUT format AL) to the same video format as
the TV (p.1).
Use the stervideo ble that came with the camera (p.139).
Printing-Related Problems
There are fewer printing effects than listed in the instruction
manual.
The printing effects displayed may differ depending on the printer. The
instruction manual lists all the printing effects available (p.158).
Download from Www.Somanuals.com. All Manuals Search And Download.
208
Error Codes
If there is a problem with the camera, an
error message appears. Follow the on-
screen instructions.
Error No.
To recover from the error screen, turn the
power switch <2> and <1>, or
remove and reinstall the battery.
If error 02 (Card problem) is displayed,
remove and reinstall the card or format the
card. This may resolve the problem.
Countermeasures
If the same error keeps appearing, there may be a problem. Write
down the error code and consult your nearest anon Service
Center.
No.
Error Solutio
Communications between thand lens aulty. Clean the
lens contacts.
01
ÎClean the eles on e camera and lens, use a Canon
lens, or have ens cked or repaired. (p.13,16)
The is a probleard. Replace the card.
02
04
Îmove and install tcard again, replace the card, or format the
c. (p.29,
Cannoages because the card is full. Replace the card.
ÎReplace the card, erase unnecessary images, or format the card.
(p.29, 142, 43)
Self Cleaning Sensor Unit malfunction. Consult with Canon
Service Center.
06
ÎOperate the power switch or have the camera checked or repaired.
(p.27)
Shooting is not possible. Turn the power switch to <2> and
<1> again or re-install the battery.
10, 20,
30, 40,
50, 60,
70, 80
ÎOperate the power switch, remove and install the battery again, use
a Canon lens, or have the camera checked or repaired. (p.27,26)
Download from Www.Somanuals.com. All Manuals Search And Download.
209
System Map
Eyepiece Extender
EP-EX15
ST-E2 220EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite
MR-14EX MT-24EX
Rubber Frame Eb
Bundled
Accessories
E-series Dioptric
Adjustment Lenses
Focusing
Screen Eg-A
Eyecup Eb
Stra
EW-EOS5DM
Angle Finder C
Date / time
Battery Pack
LP-E6
CR1616 lithium battery
Barger
LC-E6 or LC-E6E
Focusing Screen
Eg-D Eg-S
Battery Grip
BG-E6
Car Battery
Cable
CB-570
AC Adapter DC Coupler
AC-E6
DR-E6
AC Adapter Kit
ACK-E6
Car Battery Charger
CBC-E6
Battery Magazine
BGM-E6
Download from Www.Somanuals.com. All Manuals Search And Download.
210
System Map
Timer Remote Remote
Controller
TC-80N3
Wireless
Controller
LC-5
Remote
Controller
RC-5
Remote
Controller
RC-1
Switch
RS-80N3
EF lenses
External microphone
HDMI 0
Stereo Video Cable STV-250N
EOS DIGITAoftware Instruction
TV/Video
USB external media
File Tramitter
4/WFT-E4A
USB GPS unit
Solution Disk
Manual
Wireless LAN
access point
Interface C
IFC-200U
Wireless LAN adapter
Ethernet port
Interface Cable IFC-500U
Personal
computer
USB port
Windows Vista
Windows XP
Mac OS X
Original Data
Security Kit
OSK-E3
Card reader
PC card slot
PictBridge-compatible printer
CF card
PCMCIA adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
211
Specifications
• Type
Type:
Digital, single-lens reflex, AF/AE camera
Recording media:
Image sensor size:
Compatible lenses:
Type I or II CF card, UDMA-compatible
Approx. 36 x 24 mm
Canon EF lenses (except EF-S lenses)
(The effective lens focal length is the same as indicated on the lens)
Canon EF mount
Lens mount:
• Image Sensor
Type:
CMOS sensor
Effective pixels:
Aspect ratio:
Approx. 21.10 megapixels
3:2
Dust delete feature:
Auto, Manual, Dust Delete Data apding
• Recording System
Recording format:
Image type:
Design rule for Camera File Syst
JPEG, RAW (14-biiginal)
RAW+JPEG simulording poble
Large : prox. 21pixels (561x 3744)
Mediu11.1egapixels (4080 x 2720)
Sma20 mapixels (2784 x 1856)
RAW 00 mapixels (5616 x 3744)
sRAW00 megapixels (3861 x 2574)
sRAW2 : 20 megapixels (2784 x 1856)
Recorded pixels:
Create/select a fer: Possible
• Image Processi
Picture Style:
dard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
White balance:
Auto, Preset (Daylight, Shade, Cloudy, Tungsten light,
White fluorescent light, Flash), Custom, Color
temperature setting (2500-10000K)
White balance correction and white balance bracketing
features provided
* Color temperature information transmission enabled
Applicable to long exposures and high ISO speed shots
Noise reduction:
Automatic image
brightness correction: Auto Lighting Optimizer
Highlight tone priority: Provided
Lens peripheral
illumination correction: Provided
Download from Www.Somanuals.com. All Manuals Search And Download.
212
Specifications
• Viewfinder
Type:
Eye-level pentaprism
Coverage:
Magnification:
Eye point:
Vertical/Horizontal approx. 98%
-1
Approx. 0.71x (-1 m with 50mm lens at infinity)
-1
Approx. 21 mm (From eyepiece lens center at -1 m
-1
)
Built-in dioptric adjustment:-3.0 - +1.0 m (dpt)
Focusing screen:
Interchangeable (2 types sold separately), Eg-A standard
focusing screen provided
Mirror:
Quick-return type
Depth-of-field preview: Provided
• Autofocus
Type:
TTL secondary image-registratiophase detection
AF points:
9 plus 6 Assist AF points
Metering range:
Focus modes:
EV -0.5 - 18 (at 233°F, IS
One-Shot AF, , AI FocF, Manual focusing
(MF)
AF-assist beam:
AF Microadjustment:
Emitthe Ecated external Speedlite
Atmeossible
• Exposure Control
Metering mod:
35aperture metering
• Evering (linkable to any AF point)
• Partial ring (approx. 8% of viewfinder at center)
• ot metering (approx. 3.5% of viewfinder at center)
enter-weighted average metering
Metering range:
EV 1 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Exposure control:
Program AE (Full Auto, Creative Auto, Program), shutter-
priority AE, aperture-priority AE, manual exposure, bulb
exposure
ISO speed:
(Recommended
exposure index)
Full Auto, Creative Auto: ISO 100 - 3200 set automatically
P, Tv, Av, M, B: ISO 100 - 6400 (in 1/3-stop increments)
settable, Auto, or expandable to ISO 50
(L), ISO 12800 (H1), or ISO 25600 (H2)
Exposure compensation: Manual and AEB (Settable in combination with manual
exposure compensation)
Settable amount: ±2 stops in 1/3- or 1/2-stop increments
AE lock:
Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button
Download from Www.Somanuals.com. All Manuals Search And Download.
213
Specifications
• Shutter
Type:
Electronically-controlled, focal-plane shutter
Shutter speeds:
1/8000 sec. to 30 sec., bulb (Total shutter speed range.
Available range varies by shooting mode.) X-sync at 1/200 sec.
• Drive System
Drive modes:
Single shooting, continuous shooting, 10-sec. self-timer/
remote control, 2-sec. self-timer/remote control
Max. approx. 3.9 shots/sec.
Continuous shooting speed
:
Max. burst:
JPEG Large/Fine: Approx. 78 shots (Approx. 310 shots),
RAW: Approx. 13 shots (Approx. 14 shots),
RAW+JPEG Large/Fine: Approx. 8 shoApprox. 8 shots)
* Figures are based on Canon’s tesg standards (ISO
100 and Standard Picture Susa 2GB card.
* Figures in parenthespply to ra DMA (UDMA)
2GB card bases testing ndards.
• External Speedlite
Compatible flash:
Flash metering:
Flash exposure
compensation:
FE lock:
EX-selites
E-TT
2 sto2-stop increments
Provide
Provided
PC terminal:
• Live View Shoog
Shooting modes:
Focusing:
hoto shooting and movie shooting
Quick mode (Phase-difference detection)
Live mode, Live face detection mode (Contrast detection)
Manual focusing (5x/10x magnification possible)
Evaluative metering with the image sensor (still photos) /
Center-weighted average metering (movies)
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Metering modes:
Metering range:
Silent shooting:
Movie:
Provided (Still photo shooting)
MOV (Video: H.264, Audio: Linear PCM)
Recording size: 1920x1080 (Full HD), 640x480 (SD)
Continuous movie shooting time: Full HD approx. 12 min.
SD approx. 24 min.
* Based on Canon's testing standards using a 4GB card.
Download from Www.Somanuals.com. All Manuals Search And Download.
214
Specifications
• LCD Monitor
Type:
TFT color liquid-crystal monitor
Monitor size and dots: 3-in. with approx. 920,000 dots (VGA)
Coverage: Approx. 100%
Brightness adjustment: Auto (Darker/Standard/Brighter), Manual (7 levels)
Interface languages:
25
• Image Playback
Image display formats: Single, Single + Info (Image-recording quality, shooting
information, histogram)
4-image index, 9-image index, image rotate possible
Zoom magnification:
Image browsing
methods:
Approx. 1.5x - 10x
Single image, jump by 10 00 ages, jump by
screen, by shootinte, by fby movie, by stills
Overexposed link
Highlight alert:
Movie playback:
Enabled (LCD eo/audio T, HDMI OUT)
Builteaker
• Direct Printing
Compatible printers:
Printable imas:
Print orderin
Patiblinters
JPmages
DPO1 compatible
• Customizan
Custom Functi:
Camera user settiegister under Mode Dial’s C1, C2, and C3 positions
My Menu registration: Provided
• Interface
Digital terminal:
For personal computer communication and direct printing
(Hi-Speed USB)
Audio/video output
terminal:
3.5mm dia. stereo mini jack (NTSC/PAL selectable)
HDMI mini OUT terminal: Type C (Auto switching of resolution)
External microphone
input terminal:
3.5mm dia. stereo mini jack
Remote control terminal: Compatible with remote control via N3 Type
Wireless remote control
Extension system
terminal:
:
With Remote Controller RC-1/RC-5
For connection to Wireless File Transmitter WFT-E4/E4A
Download from Www.Somanuals.com. All Manuals Search And Download.
215
Specifications
• Power Source
Battery:
Battery Pack LP-E6 (Qty. 1)
* AC power can be supplied via AC Adapter Kit ACK-E6
* With Battery Grip BG-E6 attached, size-AA/LR6
batteries can be used
Battery information:
Remaining capacity, Shutter count, and Recharge
performance displayed
Battery life:
With viewfinder shooting:
(Based on CIPA
testing standards)
At 23°C/73°F, approx. 850 shots. At 0°C/32°F, approx.
750 shots
.
With Live View shooting:
At 23°C/73°F, approx. 200 shots. AC/32°F, approx.
180 shots.
• Dimensions and Weight
Dimensions (W x H x D): 152 x 113.5 x 75 .5 x 3.0 i
Weight:
• Operation Environment
C -
85%
Approx. 810 g / 28.only)
Working temperature range:0
°
104°
Working humidity:
• Battery Pack P-E6
Type:
Rated voltage:
Rechargeaum-ion battery
7.2 C
Battery capacity:
180Ah
Working temperature range
Working humidity:
- 40
85% or less
Dimensions (W x H x D): 38.4 x 21 x 56.8 mm / 1.5 x 0.8 x 2.2 in.
Weight: Approx. 80 g / 2.8 oz.
°C / 32°F - 104°F
• Battery Charger LC-E6
Type:
Charger dedicated to the Battery Pack LP-E6
Recharging time:
Rated input:
Approx. 2 hours 30 min.
100 - 240 V AC (50/60 Hz)
8.4 V DC/1.2A
Rated output:
Working temperature range:5
°
C - 40
85% or less
Dimensions (W x H x D): 69 x 33 x 93 mm / 2.7 x 1.3 x 3.7 in. (Plug collapsed)
Weight: Approx. 130 g / 4.6 oz.
°C / 41°F - 104°F
Working humidity:
Download from Www.Somanuals.com. All Manuals Search And Download.
216
Specifications
• Battery Charger LC-E6E
Type:
Charger dedicated to the Battery Pack LP-E6
Power cord length:
Recharging time:
Rated input:
Approx. 2 m / 6.6 ft.
Approx. 2 hours 30 min.
100 - 240 V AC (50/60 Hz)
8.4 V DC/1.2A
Rated output:
Working temperature range:5
Working humidity:
°
C - 40
85% or less
Dimensions (W x H x D): 69 x 33 x 93 mm / 2.7 x 1.3 x 3.7 in.
Weight: Approx. 125 g / 4.4 oz. (excluding power cord)
°C / 41°F - 104°F
• EF24-105mm f/4L IS USM
Angle of view:
Diagonal extent: 84
Horizontal extent: 74
°
- 23
°
20'
°
- 19
Vertical extent: 53 °
Lens construction:
Minimum aperture:
Closest focusing
distance:
Max. magnification:
Field of view:
18 elements i
f/22
0ft. (Fimage sensor plane)
0m)
5106 m / 21.1 x 13.6 - 6.2 x 4.2 in. (at
0.4
Image Stabilr:
Filter size:
Lens
7mm
Lens cap:
7U
Max. diameter x l.5 x 107 mm / 3.3 x 4.2 in.
Weight:
Hood:
Case:
Approx. 670 g / 23.6 oz.
EW-83H
LP1219 (sold separately)
All specifications above are based on Canon’s testing standards.
The camera’s specifications and exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
About Full HD 1080
Full HD 1080 indicates compatibility with High-Definition with
1080 vertical pixels (scanning lines).
Download from Www.Somanuals.com. All Manuals Search And Download.
217
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
CompactFlash is a trademark of SanDisk Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in
the United States and other countries.
HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or
registered trademark of HDMI Licensing LLC.
All other corporate and product names and trademarks mioned in this
manual are the property of their respective owners.
*
This digital camera supports Design rule for Camera Fiem 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is d that ences
compatibility between digital cameras aBy conneg the camera
to an Exif Print-compliant printer, the shoation is inporated to
optimize the print output.
About MPEG4 Licensi
“This product is ensed under AT&for the MPEG-4 standard and may be
used for encodinPEG-4 copliant video and/or decoding MPEG-4 compliant video
that was encoded y (1) for ersonal and non-commercial purpose or (2) by a
video provider licensnhe AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.”
* Notice displayed in English as required.
Download from Www.Somanuals.com. All Manuals Search And Download.
218
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reverpolarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the alloe amnt temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed thing time.
- Do not insert any foreign metallic objects electricntacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from childd swallows e battery, consult a
physician immediately. (Battermicals the stomach and intestines.)
• When disposing of a battek-up ery, insulate the electrical contacts
with tape to prevent contatallic jects or batteries. This is to prevent
fire or an explosion.
• If excessive at, ske, oted during battery pack recharging,
immediately nplug the battem the power outlet to stop the recharging
and prevenfire.
• If the battery ck or backbattery leaks, changes color, deforms, or emits smoke or
fumes, removimmediay. Be careful not to get burned in the process.
• Prevent any batte from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
219
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards belo
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull plug insthe cord.
- Do not scratch, cut, or excessively bend thut a heavject on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to ther outlet.
- Do not use a cord whose insulbeen d.
• Occasionally unplug the powea droth to clean off the dust around
the power outlet. If the surrounmid, oily, the dust on the power outlet
may become moist short-co caua fire.
Preventing ury or Equmage
• Do not leave eqment inside a car he hot sun or near a heat source. The
equipment may ome hot acause skin burns.
• Do not carry the cara arouwhile it is attached to a tripod. Doing so may cause
injury. Also make surd is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
220
Digital Camera Model DS126201 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equment does cause
harmful interference to radio or television receptiowhich can be
determined by turning the equipment off ann, thuser is encouraged
to try to correct the interference by one or morfollowing
measures:
— Reorient or relocate the recea.
— Increase the separation betwipment aneceiver.
— Connect the equipmnto an a circuit diffrent from
that to which the cond.
—
Consult the deariencradio/TV technician for help.
The cable with the ferrite with tdigital camera must be used
with this equeordth Class B limits in Subpart B of Part
15 of the Frules.
Do not makany changes or mtions to the equipment unless otherwise
specified in manual. uch changes or modifications should be made, you
could be requd to stoperation of the equipment.
Canon U.S.A. Inc
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This Class B digital apparatus complies with Canadian ICES-003.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E6 (rated input: 100-240 V AC 50/60 Hz, rated output:
8.0 V DC). Using anything else can cause fire, overheating, or
electrical shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
221
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety
and operating instructions for Battery Charger LC-E6 & LC-E6E.
2. Before using the charger, read all instructions and cautionary remarks on
(1) the charger, (2) the battery pack, and (3) the product using the battery
pack.
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E6.
Other types of batteries may burst, causing personal injury and other
damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than
by cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped tripped over, or
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or g - place them
immediately.
9. Do not operate the charger if it has recharp bloeen dropped,
or otherwise damaged in any way; talified sereman.
10. Do not disassemble the charger; take ied servican when
service or repair is required. rect rey may result n a risk of
electric shock or fire.
11. To reduce risk of electric chaer from outlet before
attempting any maintena.
MAINTENANCNSTUCTI
Unless otherwistated in this e are no user serviceable parts
inside. Refer scing to qualified man.
USA aanada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
222
Index
10-sec. or 2-sec. delay....................86
1920x1080 ....................................121
1st-curtain sync.............................105
4- or 9-image index display...........131
640x480 ........................................121
Borders (Yes/No).......................... 157
Bracketing ........................ 69, 97, 174
Bulb ................................................ 99
Noise reduction........................ 176
Bulb exposures............................... 99
C
A
w, x, y............................. 20, 187
C (Creative Auto)......................... 51
Cable................................ 3, 139, 140
AC Adapter Kit ..............................196
Access lamp....................................30
Adobe RGB.....................................76
AE lock............................................98
AEB.................................97, 174, 175
AF J Focusing
AF Microadjustment......................181
AF stop button...............................178
AF-ON (AF start) button..........35, 182
AI FOCUS (AI Focus AF)................80
AI SERVO (AI Servo AF) .....79
AI Servo AF......................
Aperture-priority AE .........
Assist AF poin.......
Auto Lighting ptimizer.........
Auto playbac...........................
Auto power of..................27, 44
Auto reset.............................75
Auto rotate of vertical ages .......146
Autofocus J Focusing
Camera
Camera shake.......................... 101
Clear camsettings................ 45
Holding the mera.................... 34
Settiestion display ....... 190
era sha..................... 33, 35
user segs ............. 20, 187
.......................... 13, 29, 43
d reminder............................ 29
ormat........................................ 43
oblem...................................... 30
Cen-weighted average metering... 95
CF card J Card
Cleaning ....................................... 147
Clear camera settings .................... 45
Clock .............................................. 42
Color space .................................... 76
Color temperature .......................... 67
Color tone............................... 61, 160
Continuous ..................................... 74
Continuous shooting............... 85, 191
Contrast.................................. 61, 160
Cool tone (printing)....................... 158
Copyright information ..................... 46
Cord.................................. 3, 139, 140
Creative Auto.................................. 51
M icon ............................................. 4
Cross-type focusing........................ 83
Automatic selection (AF).................81
Av (Aperture-priority AE).................92
B
B (Bulb)...........................................99
B/W ...........................................60, 62
Battery J Power
Battery check..................................28
Battery Grip...................................192
Beeper ..............................48, 79, 200
Black-and-white (printing) .............158
Black-and-white image..............60, 62
Custom Functions ........................ 172
Clearing all............................... 172
Download from Www.Somanuals.com. All Manuals Search And Download.
223
Index
Flash
Custom Functions.................... 106
D
Date/Time .......................................42
Date/time battery replacement...197
External Speedlite............ 103, 104
FE lock..................................... 103
Flash control ............................ 105
Flash exposure compensation .. 103
Flash sync (1st/2nd curtain)..... 105
Flash-sync speed............. 104, 175
DC coupler....................................196
Default (printing) ...........................158
Depth-of-field preview.....................93
Digital terminal......................154, 167
Dioptric adjustment.........................34
Direct printing J Printing
Flash exposure
compensation............... 103, 174, 191
Flash mode .................................. 105
Flash-sync contacts ....................... 16
Focus confirmatiight ................. 48
Focus lock................................. 50
Focus mode itc................ 31, 84
Direct selection .............................179
Direct transfer ...............................167
DPOF............................................163
Drive mode .............................85, 191
Dust Delete Data ..........................149
Dynamic range..............................177
Fo
e ...................... 78, 191
display .................. 129
selection .... 81, 179, 191
Assist beam........................ 179
Beer ......................... 48, 79, 200
Diffit-to-focus subjects........... 84
Live View shooting........... 113, 119
Manual focusing................. 84, 119
Out of focus ................. 49, 84, 118
Recompose................................ 50
E
Erase (image) ............................
Error codes ............................
E-TTL autoflash .....................
Evaluative meteri...........
Exposure compsation .........96
Exposure simulan .....................10
EX-series Speedli................103
Extension..............................75
External Speedlite J Flas
Focusing screen........................... 184
Folder Create/Select ...................... 72
Format (CF card initialization)........ 43
Full Auto......................................... 48
Full HD ......................................... 121
Full High-Definition....................... 121
Function availability table............. 198
Eyecup..........................................100
Eyepiece cover .......................23, 100
F
Faithful............................................60
FE lock..........................................103
FEB...............................................105
File name........................................74
File number.....................................74
File size...........................55, 123, 129
Filter effect (Monochrome)..............62
Fine (Image-recording quality)........55
Firmware Ver.................................202
G
Grid display .................................. 111
Grid matte .................................... 184
H
HDMI............................................ 140
High-Definition...................... 121, 140
High ISO speed noise reduction .. 176
Download from Www.Somanuals.com. All Manuals Search And Download.
224
Index
Highlight alert................................129
Highlight detail loss.......................129
Highlight tone priority ....................177
Histogram (Brightness/RGB) ........130
Hot shoe........................................104
Household power..........................196
Language selection ........................ 42
Large (Image-recording quality) ..... 55
LCD monitor ................................... 13
Brightness adjustment ............. 144
Image playback........................ 127
Menu settings..................... 40, 200
Shooting functions ................... 191
I
LCD panel ...................................... 18
Illumination................................. 99
Lens.......................................... 21, 31
Lock release............................... 32
Peripheral illumination correction .... 70
ICC profile.......................................76
Illumination (LCD panel) .................99
Image
AF point display........................129
Auto playback...........................135
Auto rotate................................146
Erase ........................................142
Highlight alert............................129
Histogram .................................130
Index.........................................131
Jump display (Image browsin132
Magnified view..............
Manual rotate...............
Playback......................
Protect ................
Shooting ormation........
Transfer tersonal compute
View on T.........................139
Live View shong ....................... 107
Grid displa........................... 111
Inforon play................... 112
ive face tion mode......... 116
mode .......................... 115
al focusi.............. 113, 119
e recording .................... 121
ssible shots.......................... 111
uick mode.............................. 113
reen settings ........................ 109
Sent shooting ......................... 120
Long exposure noise reduction .... 176
M
M (Manual exposure) ..................... 94
Magnified view...................... 119, 133
Main Dial
Main Dial.................................... 36
Quick Control Dial...................... 37
Malfunction................................... 203
Manual AF point selection.............. 81
Manual exposure............................ 94
Manual focusing ..................... 84, 119
Manual reset................................... 75
Maximum burst......................... 55, 56
Medium (Image-recording quality) ... 55
Memory card J Card
Image dust pretion ..............147
Image review time.............145
Image Stabilizer (lens) ....................33
Image transfer...............................167
Image-recording quality ..................54
Index display.................................131
ISO speed.......................57, 174, 191
Automatic setting........................58
ISO expansion..........................174
J
JPEG...............................................54
Jump display.................................132
L
Landscape ......................................59
Download from Www.Somanuals.com. All Manuals Search And Download.
225
Index
Menu
PC terminal ............................ 16, 104
Peripheral illumination correction... 70
Menu settings...........................200
My Menu...................................186
Setting operation ........................40
3icon .........................................4
Metering mode........................95, 191
MF (Manual focusing).....................84
Microphone (Built-in/External) ......124
Mirror lockup.........................101, 180
Mode Dial J Shooting mode
Personal computer
Image transfer.......................... 167
Wallpaper................................. 169
Personal white balance.................. 67
PictBridge..................................... 153
Picture Style ............................ 59 - 64
Pixels.............................................. 54
Playback J Image
Monochrome image..................60, 62
Portrait............................................ 59
Possible shots............. 28, 55, 111
Power
Auto pooff................. 27, 44
Baery che...................... 28
info.......................... 192
ld power................ 196
shots......... 28, 55, 111
rge ................................... 24
Sh ........................................ 27
Movie
Playback...................................137
Recording.................................121
View on TV...............................139
Multi-controller ..........................36, 81
My Menu.......................................186
N
Natural/M (printing)................
Neutral ...................................
Noise reduction.............
Nomenclature ........................
Non-Canon flash nits ..................10
Normal (Image-reding qua) ...55
NR (printing) ......................158
NTSC..........................................201
Number...........................................74
recismatte ............................ 184
essing completely....................... 35
essing halfway............................ 35
Printing......................................... 153
Page layout.............................. 157
Paper settings.......................... 156
PictBridge ................................ 153
Print Order (DPOF).................. 163
<l> button.......................... 159
Printing effects ......................... 160
Tilt correction ........................... 161
Trimming.................................. 161
O
ONE SHOT (One-Shot AF).............79
One-Shot AF...................................79
Original decision
Program AE.................................... 88
Program shift ............................. 89
Protect (image erase-protection) ... 141
(image verification) data ...............185
P
Q
P (Program AE) ..............................88
PAL ...............................................201
Paper settings (printing)................156
Partial metering...............................95
Quick Control Dial .......................... 37
Quick Control screen...................... 38
Quick mode.................................. 113
Download from Www.Somanuals.com. All Manuals Search And Download.
226
Index
sRAW (Small RAW).................. 54, 56
sRGB.............................................. 76
Still photo J Image
Strap............................................... 23
Superimposed display.................. 179
System map ................................. 210
R
RAW..........................................54, 56
RAW+JPEG ....................................54
Recharge ........................................24
Recording func..............................201
Remote control shooting.......100, 102
Remote Switch..............................100
Rotate (image) ..............134, 146, 161
T
Toning effect (Monochrome)........... 62
Transfer order (image) ................. 170
Trimming (printing) ....................... 161
Tripod socket................................ 17
Tv (Shutter-pty AE)................... 90
S
Safety shift ....................................175
Safety warnings ............................219
Saturation................................61, 160
Self-timer.........................................86
Sensor cleaning ............................147
Sepia (Monochrome) ......................62
SET button......................................40
Sharpness...........................1
Shoot w/o card.................
Shooting information displ
U
DMA (U)................... 29, 55
gital) teral........... 154, 167
fined............................ 187
Visystem........................ 139, 201
View on TV................................... 139
Viewfinder....................................... 19
Dioptric adjustment .................... 34
Vivid.............................................. 158
Volume (Movie playback) ............. 138
Shooting mod..............
Aperture-ority AE..........
Bulb .................................
Creative A..........................51
Full Auto ...........................48
Manual exposu.............94
Program AE................................88
Shutter-priority AE ......................90
W
Wallpaper ..................................... 169
Warm tone (printing)..................... 158
WB J White balance
White balance......................... 65, 191
Bracketing.................................. 69
Correction .................................. 68
Custom....................................... 66
Personal..................................... 67
Shooting settings display ..............191
Shutter button .................................35
Shutter sync..................................105
Shutter-priority AE...........................90
Silent shooting ..............................120
Single image display.....................128
Single shooting ...............................85
Slide show.....................................135
Small (Image-recording quality)......54
Small RAW................................54, 56
Spot metering..................................95
Wireless remote control................ 102
Download from Www.Somanuals.com. All Manuals Search And Download.
227
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
CANON EUROPA N.V.
AFRICA &
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
MIDDLE EAST
17,Quai du Président Paul Doumer, 92414 Courbevoie Cederance
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingd
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeny
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Mi
CANON Schweiz A.G.
Industriestrasse 12, 8on, Sw
Canon GmbH
Zetschegasse 11, stria
CANON España,
Av. ropa,6 Adrid, S
ON ugal
a Alfredo da Silva016 Amadora, Portugal
CENTRAL &
NON LATIN AMERIC
SOUTH AMERICA Waterford WaySuite 400 Miami, FL 33126,U.S.A.
ASIA
CN (China) , LTD.
15ao BuilNo.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Gangnam Finance Center 17F, 737,Yeoksam-Dong, Gangnam-Gu, Seoul, 135-984, Korea
OCEANIA
JAPAN
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of September 2008. For information
on the camera’s compatibility with any accessories and lenses introduced after
this date, contact any Canon Service Center.
CT1-1028-000
© CANON INC. 2008
PRINTED IN JAPAN
Download from Www.Somanuals.com. All Manuals Search And Download.
|