ROD HOLDER & DOWNRIGGER
TROLLING SYSTEM
Rod Holders:
ANGLED FIXED MOUNT 1907000
Adjustable Single Axis 1907001
Adjustable Rail Mount 1907020
Adjustable Clamp Mount 1907021
Adjustable Dual Axis 1907002
Adjustable Downrigger Mount 1907022
(METALLIC)
1907023
Adjustable Downrigger Mount
(BlACK)
CAUTION:
READ THIS MANUAL CAREFULLY
BEFORE OPERATING YOUR
NEW CANNON ACCESSORY.
RETAIN FOR FUTURE REFERENCE.
NOTE: Do not return your CANNON accessory to your
retailer. Your retailer is not authorized to repair or re-
place this unit. You may obtain service by:
• calling CANNON at 1-800-227-6433;
• returning your accessory to the Factory Service Center;
121 Power Drive, Mankato, MN 56001
Please include proof of purchase and purchase date for
warranty service with any of the above options.
Adjustable Dual Axis Rod Holder Shown
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1907022 Adjustable – Downrigger Mount Rod Holder - Metallic
1907023 Adjustable – Downrigger Mount Rod Holder - Black
The Adjustable – Dual Axis Rod Holder is also available on a Cannon
downrigger mount in a metallic or black finish (metallic finish shown right).
1904015 Rail Mount 3/4” to 1-1/4”
1904016 Rail Mount 1-1/4” to 2”
Cannon Rail Mounts allow for the mounting of Cannon Single and Dual
Axis Rod Holders to round or square rail. Two sizes are available for round and
square tube styles. Components are made from clear anodized aluminum and
stainless steel for strength and corrosion resistance.
1904020 Clamp Mount
Cannon Rail Mounts allow for the mounting of Cannon single and
dual axis rod holders to any transom or allowable clamping edge.
Clamp opens to two and a half inches and is made from clear anodized
aluminum and stainless steel for strength and corrosion resistance.
1904000 Deck Mount
The Cannon Deck Mount plate is a four inch by three inch clear
anodized aluminum plate which allows the hard mounting of Cannon Dual
Axis Rod Holders. The plate comes with a black protective mounting boot
and all mounting hardware.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1904025 Aluminum Mounting Track 6”
1904026 Aluminum Mounting Track 12”
1904027 Aluminum Mounting Track 18”
1904028 Aluminum Mounting Track 24”
1904029 Aluminum Mounting Track 36”
Cannon tracks allow for flexible mounting positions and easy
removal of Cannon’s track system accessories. Locking grooves allow
thumb screws to index with track and prevent accessories from twisting.
The system is compatible with Cannon, Bert’s, and Traxtech track sys-
tem products. Components are made from clear anodized aluminum
and stainless steel for strength and corrosion resistance. All mounting
hardware included. Available in 6, 12, 18, 24, and 36 inch lengths.
1904005 Pedestal Mount Track 12”
1904006 Pedestal Mount Track 18”
The pedestal mounting track is three inches high and allows for
mounting of Cannon’s track system accessories. Pedestal can be sur-
face mounted or slid into mounting track for a variety of mounting posi-
tions and easy removal. The system is compatible with Cannon, Bert’s,
and Traxtech track system products. Components are made from clear
anodized aluminum and stainless steel for strength and corrosion resis-
tance. Mounting hardware is included. Pedestal is available in twelve
and eighteen inch track lengths for mounting up to three track system rod holders.
1904010 Gimbal Mount Track – Side Gunnel
1904011 Gimbal Mount Track – Stern
Cannon’s Gimbal Mount Track allow for mounting of Cannon’s
track system accessories in flush mount rod holders. Thirty degree an-
gled gimbals have twelve inch tube length with an outer diameter of 1-1/2
inches. Eighteen inches of track allow for mounting up to three track
system rod holders. The system is compatible with Cannon, Bert’s, and
Traxtech track system products. Components are made from clear ano-
dized aluminum and stainless steel for strength and corrosion resistance.
1904030 Fixed Base Downrigger Pedestal 4”
1904031 Fixed Base Downrigger Pedestal 6”
CAUTION:
Cannon’s fixed base downrigger pedestals
can be surface mounted or track mounted for a vari-
ety of mounting positions and easy removal. The
3/4” thick aluminum top plate is pre-drilled and
tapped for mounting Cannon downriggers as well as
most Scotty®, Big Jon®, Penn®, Vector, Proos,
The Cannon Pedestal
Mount is intended for
use with a Track that is
mounted directly to the
deck of the boat ONLY.
Fishlander and Walker downriggers. Components are made from clear ano-
dized aluminum and stainless steel for strength and corrosion resistance. The
fixed base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1904032 Swivel Base Downrigger Pedestal 4”
1904033 Swivel Base Downrigger Pedestal 6”
Cannon’s swivel base downrigger pedestals can be surface
mounted or track mounted for a variety of mounting positions and easy re-
moval. With 16 locking points, these downrigger pedestals allow for 360°
downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum
top plate is pre-drilled and tapped for mounting Cannon downriggers as well
as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker
downriggers. Bearing system ensures smooth swivel action even while a
downrigger weight is attached. Components are made from clear anodized
aluminum and stainless steel for strength and corrosion resistance. The
swivel base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.
Rod Holder \ Accessory Compatibility
Mounts
Track Mount
Gimbal Track Mount Pedestal Track Mount
Rail Mount
Clamp Mount
Deck Mount
Rod Holde r
Angled Fixed Mount
Adjustable Single Axis
Adjustable Dual Axis
●
●
●
●
●
●
●
●
●
○
○
○
○
●
*
*
●
●
*
*
●
●
- Compatible
- Not Compatible * - Compatible with removal of track mount plate
●
○
Pedestal Mount \ Accessory Compatibility
Mounts
Track Mount
Gimbal Track Mount Pedestal Track Mount
Rail Mount
Clamp Mount
Deck Mount
Pedestal
4" Fixed Mount
●
●
●
●
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
●
●
●
●
6" Fixed Mount
4" Swivel Mount
6" Swivel Mount
○
- Compatible
- Not Compatible
●
○
Part
Part Number Description
USED ON
Replacement Parts
1904005, 1904006, 1904010, 1904018, 1904025,
1904026, 1904027, 1904028, 1904029
3396562
3390210
3393413
3391515
33986110
END CAP
VINYL CAP
1907000
THUMB SCREW
CAP ROD HOLDER
WEAR TIP
1907000, 1907001, 1907002, 1904005, 1904006
1907001, 1907002, 1907020, 1907021, 1907022,
1907023
1907001, 1907002, 1907020, 1907021, 1907022,
1907023
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CANNON® LIMITED WARRANTY
Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from
defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson
Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be
returned, prepaid and with proof of the date of purchase to the following:
● Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001
This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" with-
out any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the origi-
nal purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty.
EXCLUSIONS
This warranty does not apply in the following circumstances:
•
When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner
other than according to the instructions furnished with the product
•
•
When a serial number has been defaced, altered, or removed
When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal
use, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's
manual
LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC.
DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WAR-
RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EX-
TEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT
OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID
UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential dam-
ages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state.
Johnson Outdoors, Inc. / Cannon Division
121 Power Drive, Mankato, MN 56001
1-800-227-6433
© 2008 Johnson Outdoors, Inc. All rights reserved.
To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com
WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity.
Product protected by United States Patent number des. D573685, D573686, D574920
Form No. 3397120 Rev D
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|