BLUETOOTH® DEVICES
• Increase the distance between
the equipment and receiver.
This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
RSS INFORMATION
LOCATION OF PARTS
AND CONTROLS
LOCATION OF PARTS
AND CONTROLS
LI-ION BATTERY WARNINGS
CHARGING THE SPEAKER
This device contains a Lithium-ion
battery. The battery must be recycled
or disposed of properly. Contact your
local waste management office for
information on battery recycling
or disposal.
This device complies with RSS-210
of the IC Rules; Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
1. Insert the included USB cable's
MICRO USB connection into the
MICRO USB CHARGING PORT
on the speaker.
The speaker pairs with devices
that use the Bluetooth® Hands
Free Profile (HFP) and/or the
Advanced Audio Distribution Profile
(A2DP). HFP enables hands-free
communication and the A2DP
dictates how audio is streamed
from one device to another over
a Bluetooth® connection. When
you pair devices to the speaker,
the devices operate according
to their protocols. For example,
when you pair a smartphone to the
speaker, it handles calls and plays
music since it has both the HFP
and A2DP protocols. MP3 players
with Bluetooth® and A2DP only
play music and cell phones (not
smartphones) only handle calls.
• Connect the equipment to an outlet
on a circuit different from that to
which the receiver is connected.
1. Charging LED Indicator (behind
speaker grill)
™
Big Blue Go
1
2
2. LED Ring
• Consult the dealer or an
experienced radio/TV technician
for help.
2. The speaker can be charged
several ways:
WIRELESS BLUETOOTH® SPEAKER
3. Pairing/Play/Pause Button
4. Micro USB Charging Port
5. Power/Battery Level Switch
6. Volume Up Button
• Plug the USB cable's USB
connection into the included
AC/DC power adapter. Plug
the AC/DC power adapter into
an electrical wall outlet.
FCC INFORMATION
This equipment has been tested
and found to comply with the
limits for a Class B Digital Device,
pursuant to Part 15 of the FCC
This equipment complies with
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
Cet appareil est conforme à la norme
RSS-210 de la règlementation
d'Industrie Canada ; son utilisation
est soumise aux deux conditions
suivantes :
3
7. Volume Down Button
8. Call Answer/Track Forward
Button
1. This equipment may not cause
harmful interference.
• Plug the USB cable's USB
connection into the included
12V/24V CAR ADAPTER and
plug the 12V/24V CAR
ADAPTER into your vehicle's
DC socket.
Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
(1) l'appareil ne doit pas produire de
brouillage, et
9. Call End or Ignore/Track Back
Button
2. This equipment must accept any
interference received, including
interference that may cause
undesired operation.
(2) l'utilisateur de l'appareil
4
5
10. Vehicle Suction Mount
11. 12V/24V Car Adapter
12. AC/DC Adapter
doit accepter tout brouillage
radioélectrique subi, même si le
brouillage est susceptible d'en
compromettre le fonctionnement.
• Plug the USB cable's USB
connection into your computer’s
USB port.
Modifications not authorized by the
manufacturer may void the user’s
authority to operate this device.
This equipment complies with FCC
RF radiation exposure limits set forth
for an uncontrolled environment. This
transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
PAIRING YOUR DEVICE
13. USB to Micro USB Charging
Cable
The device meets the exemption from
the routine evaluation limits in section
2.5 of RSS 102 and compliance with
RSS-102 RF exposure. Users can
obtain Canadian information on RF
exposure and compliance.
1. Prepare your device to pair using
Bluetooth® wireless technology,
making sure you are within 33
feet of the speaker. Refer to
your device’s owner's manual for
details if necessary.
3. The CHARGING LED INDICATOR
is RED while the speaker is
6
7
8
9
charging. When the speaker is
fully charged, the CHARGING
LED INDICATOR is GREEN. For
first time use, charge the speaker
for at least 3 hours.
12
Le dispositif rencontre l'exemption
des limites courantes d'évaluation
dans la section 2.5 de RSS 102
et la conformité à l'exposition
de RSS-102 rf, utilisateurs peut
obtenir l'information canadienne sur
l'exposition et la conformité de rf.
10
2. Slide the POWER SWITCH to l
to turn the speaker on. A tone
will sound and the LED RING will
illuminate solid blue for 5 seconds.
4. When speaker's battery is low,
the CHARGING LED INDICATOR
will flash RED.
Merrimack, New Hampshire, USA 03054
800-846-3000 Brookstone.com
•
• Reorient or relocate the
receiving antenna.
Note: When the LED RING is off and
any button is pressed, the LED RING
840066
11
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|