™
Dura-Flux
Issued March 2008 • Index No. SPEC DF-1.3
350 Amp Self-Shielded FCAW Guns
All Guns are Not Created Equal.
TM
A welding gun should be durable, easy
to use and customized to your specific
application. Our guns put you in control:
you choose the options you need and
we'll build a gun to last. We even ship
most of our guns within 24 hours.
350 Amp Dura-Flux gun
TM
shown with Centerfire
contact tip, sleeved 6 inch
neck with 60˚ bend and
trigger guard.
Built for welders using self-
shielded flux-cored wire, Dura-Flux
guns are designed for exceptional
performance and comfort in
the most demanding industrial
environments.
TM
Centerfire contact tips are easy-to-use and
high performing - they provide better arc starts,
less spatter and more consistent welds - and also
last up to three times longer than competitive
brands.
Sleeved and aluminum armored necks
available in multiple length options for optimal
weld accessibility and improved operator
comfort.
Trigger is sealed from outside contaminants,
simply replaced and absorbs less heat than a
metal trigger for long-life, greater arc-on time
and lower heat output.
Trigger guard instead of full size heat shield
allows access to tight spaces while protecting
trigger from damage.
Ultra heavy-duty steel monocoil power cables
are highly resistant to kinking for exceptional wire
feed in abusive environments.
Back end with durable rigid strain relief and
easily interchangeable direct plugs and trigger
leads connect to wire feeders and machines
from major manufacturers and allow simple
maintenance.
TM
Dura Flux Gun Part Number
Build a Dura-Flux gun part number by choosing required cable length, neck and direct plug.
FLX3515AM is an example of a typical configuration. It consists of a 350 amp Dura-Flux gun
with 15' cable, 6" x 60˚ neck and Miller style direct plug.
Power pin liner changes quickly without set
screw for user-friendly maintenance and reduced
downtime.
Amperage
Cable Length
Neck
Direct Plug
Duty Cycle
®
A
D
M
L
FLX35 350 amp 10 10' (3.05 m)
15 15' (4.57 m)
6" (15.2 cm) x 60˚
12" (30.5 cm) x 30˚
Miller
®
Lincoln
60% NEMA
at 350 Amps
®
T
Tweco
®
E
Euro
Made with
All Dura-Flux guns are compatible with 1/16" - 3/32" (1.6 mm - 2.4 mm) wire.
Bernard® and Miller® are registered trademarks of Illinois Tool Works Inc. Other brands mentioned are for reference only and
are the registered trademarks of their respective companies, and are not affiliated with Illinois Tool Works Inc.
Pride and without
Compromise in the USA
®
Bernard
An Illinois Tool Works Company
449 West Corning Road, Box 667
Beecher, Illinois 60401 USA
Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)
Fax: 708-946-6726
For more information, visit us at BernardWelds.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|