1
Specifications
Throat Diameter
50 mm (2 in)
8 Ω
Nominal Impedance
Minimum Impedance
Power Handling
8.3 Ω
(1200 –20000 Hz)
Nominal2
80 W
160 W
109.5 dB
Continuous Program3
Sensitivity (1W/1m)4
Frequency Range
0.5 – 18 kHz
1200 Hz
75 mm (3 in)
Aluminium
0.14 mH
Recommended Crossover5
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
Also available in 16 Ω, data upon request
Titanium
2.05 T
Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter
Depth
Net Weight
132 mm (5.2 in)
85 mm (3.3 in)
3 kg (6.6 lb)
Shipping Weight (4 units)
Shipping Box (4 units)
12.5 kg (27.5 lb)
300x160x210 mm
(11.8x6.3x8.3 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
DE 950 | Hf Compression drivers
5 12 dB/oct. or higher slope high-pass filter.
Top performance 2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a FEA computer
optimized lightweight Neodimium magnet assembly using a copper shorting ring result
in excellent response characteristics, very high efficiency and outstanding upper end
performance. The DE 950 features one of the highest magnetic fields currently available.
This unit weights only 2.8 kg. Recommended for low crossover frequencies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|