MOMENTS
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
MODEL NUMBER:
R126SS Pressure Balance Rough Valve Body
With Built-in Diverter & Screw Driver Stops.
LESS Trim.
T506.602 Bath/shower Trim Kit
With Built-in Diverter
• Brass wall escutcheon with built-in diverter
• Adjustable “3 function” Showerhead
• Brass tub spout
• LESS Valve
T506.600 Valve Only Trim Kit
With Built-in Diverter
• Brass wall escutcheon
• LESS Valve
1-5/8" TO 3-1/4"
T506.602 Shown with R126SS
FINISHED WALL
1/2" NPT
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge with volume and temperature control. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" NPT threaded
5-5/8" REF.
OPTIONAL TO
2-3/8"
FINISHED FLOOR
USUALLY BETWEEN
80'' AND 86'
8-1/8" REF.
Showerhead has
inlets/outlets with screwdriver stops.
2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable
brass wall escutcheon. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adapter. Brass tub spout.
74" FOR
HEAD CLEARANCE
"SEE
SHW
ILLUSTRATION"
8-3/8"
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
TUB
18"
OPTIONAL
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
6-1/2"
Pressure Balancing Valve:
Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool “thumping”. Avoids failure
due to mineral deposits - ideal for use with hard water.
1/2" NPT
1-1/2" REF.
TOP OF
4"
TUB RIM
Built-in Diverter: Easy to use, integrated in valve body
and includes positive shut-off. Allows spout and
showerhead in any desired installation location.
BOTTOM OF
TUB
5-5/8"
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
1-3/4"
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
OUTLETS 1/2" NPT
5-5/8"
THREADED INLETS (STOPS)
INLETS
1/2" NPT
SUGGESTED SPECIFICATION:
ceramic disc valve
Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless
cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American
Standard Model # R126SS with T506.___.___ trim kit.
PRESSURE BALANCE BATH/SHOWER
B13
© 2008 AS America Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|