USER GUIDE
Aleratec
1:11 USB Copy Cruiser SA™
Part No. 330107
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio/TV Interference Statement
The equipment described in this guide emits radio frequency energy. If it
is not installed in accordance with the manufacturer’s instructions, it may
cause interference with radio or television reception.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instruction manual, this
equipment may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be verified by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an electrical outlet on a circuit that is different
from the circuit to which the receiver is connected.
•
Consult your dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a Class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and/or modifications made to this equipment, without the approval
of manufacturer, could void the user’s authority to operate this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Regulations
WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to authorized personnel
only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction.......................................................................................1
Product Features .....................................................................................1
Key Items – 1:11 USB Copy Cruiser SA................................................1
1:11 USB Copy Cruiser SA Display Panel.............................................2
Precautions.......................................................................................3
Installation ..............................................................................................3
Operation ................................................................................................3
Transportation.........................................................................................3
Overview............................................................................................4
Main Menu..............................................................................................4
Subfunctions of Main Menu Items 5, 6, and 7 .......................................5
Using the USB Duplicator................................................................7
Synchronous and Asynchronous.............................................................7
Main Menu..............................................................................................8
Copy ...............................................................................................8
Compare ........................................................................................ 11
Copy+Compare..............................................................................14
Capacity Check..............................................................................18
Information....................................................................................19
Utility.............................................................................................20
Setup..............................................................................................27
Specifications .................................................................................33
Technical Support ..........................................................................34
Service and Support.......................................................................35
Technical Support FAX Back Form...............................................38
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this 1:11 USB Copy Cruiser SA. Please read this
User Guide thoroughly before using this product.
•
Page 2 shows the 1:11 USB Copy Cruiser SA Display Panel.
Product Features
•
•
•
•
•
Stand Alone, no computer required.
Copy to, Compare, or Erase up to 11 drives simultaneously.
Backlighted LCD display shows function selected and job progress.
Compatible with popular drive capacities and formats.
Fast Synchronous and Asynchronous copying.
Key Items – 1:11 USB Copy Cruiser SA
Controller and
Display Panel
Power Switch
Source USB Port
Target USB Ports
(11)
Note: Choose a Good Location
1. Do not place near heat sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust, mechanical vibration or
shock.
2. Good care will help assure maximum product life. Improper operating
environment and misuse may void the warranty.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1:11 USB Copy Cruiser SA Display Panel
1
2
4
3
5
1
2
3
4
5
Display shows all functions and messages
ENT button is used to execute a selected function
ESC button is used to cancel a selected function
UP arrow is used to scroll up through functions or menus
DOWN arrow is used to scroll down through functions or menus
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Before installing your 1:11 USB Copy Cruiser SA, please read the following.
Installation
Avoid placing the 1:11 USB Copy Cruiser SA in a location subject to:
•
•
•
•
•
•
High humidity
High temperature
Excessive dust
Mechanical vibration
Direct sunlight
Electromagnetic radiation
Operation
Avoid exposing the duplicator to sudden changes in temperature as
condensation may form on the lens inside the duplicator. Operating the
duplicator immediately after a sudden increase in temperature may result in
a malfunction during playback or writing operations.
Transportation
Keep the original packing materials for future moving or shipping of the
1:11 USB Copy Cruiser SA.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Main Menu
This section provides a listing of the functions of the 1:11 USB Copy
Cruiser SA. Detailed descriptions of each function are given in the next
section. The functions are numbered for easy reference; these numbers are
also used in the next section.
USB Duplicator
ENT
ESC
1. Copy
USB Duplicator
ENT
ESC
2. Compare
USB Duplicator
ENT
ESC
3. Copy+Compare
USB Duplicator
ENT
ESC
4. Capacity Check
USB Duplicator
ENT
ESC
5. Information
USB Duplicator
ENT
ESC
6. Utility
USB Duplicator
ENT
ESC
7. Setup
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Subfunctions of Main Menu Items 5, 6, and 7
The main menu “Information” function has 2 subfunctions. These are:
5.1 USB Info
USB Duplicator
ESC
ENT
5. Information
5.2 System Info
The main menu “Utility” function has 6 subfunctions. These are:
6.1 Format FAT
6.2 Measure Speed
6.3 Media Check
USB Duplicator
ENT
ESC
6. Utility
6.4 Quick Erase USB
6.5 Full Erase USB
6.6 System Update
6.7 Calc. Checksum
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Subfunctions of Main Menu Items 5, 6, and 7 - continued
The main menu “Setup” function has 8 subfunctions. These are:
7.1 Start-up Menu
7.2 Copy Area
7.3 Button Beep
7.4 Asyn Hold Time
7.5 Ignore Size
USB Duplicator
ENT
ESC
7. Setup
7.6 Asynchronous
Enable/Disable
7.7 Language
7.8 Working Mode
Normal/Turbo
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Synchronous and Asynchronous
The 1:11 USB Copy Cruiser SA supports two copying methods:
•
•
Synchronous
Asynchronous
Synchronous Copying
Synchronous Copying means that all flash drives begin copying together.
Synchronous Copying is used when the source data is larger than the system
buffer (256MB).
You can check the size of the data source drive by inserting the source drive
into the USB Duplicator and using the arrow keys to first select “Information”,
then select “USB Info”.
Plug in one source and up to 11 target USB flash drives. The display will read
out the number of USB flash drives that are ready for copying and the content
size. When you have finished loading the target drives use the arrow keys to
select “Copy” and then select OK.
Asynchronous Copying
Asynchronous Copying is used when the data files are the same as or less than
the systems buffer memory (256MB). If the source data content is less than
the systems buffer memory you can copy flash drives continuously by taking
out the drive which has finished copying, and replacing it with another blank.
Asynchronous Copying will start immediately after loading the first target
drive.
When this process is used the source data is read into systems buffer first. You
can check the size of the data source USB flash drive by inserting it into the
USB Duplicator and using the arrow keys to first select “Information”, then
select “USB Info”.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Functions are selected with the arrow keys. The numbers correspond to the
Function listing in the previous section.
Copy
This function makes USB flash copies. The duplicator auto detects and
supports Synchronous, and Asynchronous methods of Copy.
Synchronous Copying
In Synchronous Copying all USB flash drives are copied simultaneously.
Synchronous Copying is used when the source data is larger than the system
buffer (256MB).
1. Load the source flash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Copy is displayed on
the LCD screen.
USB Duplicator
ENT
ESC
1. Copy
2. Press the OK button on the display panel. The LCD will display the
following status:
USB(963M)
450M
ENT
ESC
0 ready
Note: The number beside “USB” is the capacity of the USB flash drive
in megabytes. The number to the right is the size occupied by files or
images.
3. Load the blank target flash drives into the USB Duplicator. The LCD
will display the number of blank media loaded and ready for copying.
USB(963M)
450M
ENT
ESC
3 ready
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Synchronous Copying - continued
4. Finish loading the blank target flash drives, then press the OK button on the
display panel.
5. The LCD will display the status of the copying process.
Total MBytes
on source
Copy
15%
450M
68M
ENT
ESC
0:32
Percent Complete
Time elapsed
MBytes copied
6. When Copy is complete LCD will display the following status:
Total OK: 5 OK: 5 NG: 0
1:03 OK: 5 NG: 0
ENT
ESC
If the Copy fails, the LCD will display the number of flash drives that failed
and passed.
Note: When copying is in process the Green LED on the front panel is
blinking. Do not take out the drive while it is copying. When copying is
finished the Green LED stays on (no blinking). If an error occurs during the
copy process a Red LED will display.
Asynchronous Copying
Asynchronous Copy is used only when the source content is the same as or less
than the system buffer (256MB). With the source content read into the systems
buffer you can copy flash drives continuously by taking out the drive which has
finished copying, and replacing it with another blank. This process is repeated
until the copying job is complete.
1. Load the source flash drive into the USB Duplicator. Use the UP or DOWN
arrow to scroll through the menu until Copy is displayed on the LCD screen.
USB Duplicator
ENT
ESC
1. Copy
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
2. Press the OK button on the display panel. The USB Duplicator will start
to read the source content into the system’s buffer and immediately start
copying any loaded target USB flash drives.
USB(58M) 450M
ENT
ESC
Reading...
3. Load the blank target flash drives into the USB Duplicator. The LCD will
display the number of blank media loaded and copying.
Pass: 0
Fail: 0
Working
3
ENT
ESC
Note: When copying is in process the Green LED on the front panel is
blinking. Do not take out the drive while it is copying. When copying is
finished the Green LED stays on (no blinking). If an error occurs during the
copy process a Red LED will display.
4. As finished drives are removed, and new blanks inserted, the display
will show the number of copies completed and the number of USB
flash drives still in the copying process. If the Copy fails, the LCD will
display the number of flash drives that failed and passed.
Pass: 5
Fail: 0
Working
2
ENT
ESC
Note: During Asynchronous Copying you can use the UP and DOWN
arrow keys to check each flash drives copying status.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Compare
This function will compare the finished target USB flash drives to the source
USB flash drive after copying is complete. The USB Duplicator supports
Compare in both Synchronous, and Asynchronous modes.
Synchronous Compare
In Synchronous Compare all USB flash drives are compared simultaneously.
1. When copying is complete and with the data source drive and the target
USB flash drives still loaded in the USB Duplicator, use the UP or
DOWN arrow to scroll through the menu until Compare is displayed on
the LCD screen.
USB Duplicator
ENT
ESC
2. Compare
2. Press the OK button on the display panel to select Compare. The LCD
will display the following status:
USB (953M)
3 ready
925M
ENT
ESC
3. Press OK again and the Compare will start as shown in the display below.
Compare
15%
925M
0:18 226M
ENT
ESC
Note: When Compare is in process the Green LED on the front panel
is blinking. Do not take out the drive while it is running a comparison.
When Compare is finished the Green LED stays on (no blinking). If an
error occurs during the copy process a Red LED will display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
4. When Compare is complete the display will show the total, and the
number that pass and fail.
Total OK: 5 OK: 5 NG: 0
1:03 OK: 5 NG: 0
ENT
ESC
Asynchronous Compare
Asynchronous Compare is used only when the source content is the same as
or less than the system buffer (256MB). With the source content read into
the systems buffer you can compare flash drives continuously by taking out
the drive which has finished comparing, and replacing it with another flash
drive. This process is repeated until the comparison job is complete.
1. Load the source flash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Compare is displayed
on the LCD screen.
USB Duplicator
2. Compare
ENT
ESC
2. Press the OK button on the display panel. The USB Duplicator will
start to read the source content into the system’s buffer and immediately
start comparing any loaded target USB flash drives.
USB(58M) 450M
Reading...
ENT
ESC
3. Load the target flash drives to be compared into the USB Duplicator.
The LCD will display the number of flash drives loaded and comparing.
Pass: 0
Fail: 0
Working
3
ENT
ESC
Note: When compare is in process the Green LED on the front panel
is blinking. Do not take out the drive while it is comparing. When
comparing is finished the Green LED stays on (no blinking). If an error
occurs during the process a Red LED will display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Asynchronous Compare - continued
4. As finished drives are removed, and new flash drives inserted, the
display will show the number of comparisons completed and the
number of USB flash drives still in the comparison process. If the
Compare fails, the LCD will display the number of flash drives that
failed and passed.
Pass: 5
Fail: 0
Working
2
ENT
ESC
Note: During Asynchronous Compare you can use the UP and DOWN
arrow keys to check each flash drives comparison status.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Copy+Compare
This function will Copy and Compare USB flash drives. The duplicator
auto detects and supports Synchronous, and Asynchronous methods of
Copy+Compare.
Synchronous Copy+Compare
In Synchronous Copy+Compare all USB flash drives are copied and
compared simultaneously. Synchronous Copy+Compare is used when the
source data is larger than the system buffer (256MB).
1. Load the source flash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Copy+Compare is
displayed on the LCD screen.
USB Duplicator
ENT
ESC
3. Copy+Compare
2. Press the OK button on the display panel. The LCD will display the
following status:
USB(963M)
450M
ENT
ESC
0 ready
Note: The number beside “USB” is the capacity of the USB flash drive
in megabytes. The number to the right is the size occupied by files or
images.
3. Load the blank target flash drives into the USB Duplicator. The LCD
will display the number of media loaded and ready for Copy+Compare.
USB(963M)
450M
ENT
ESC
3 ready
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Synchronous Copy+Compare - continued
4. Finish loading the blank target flash drives, then press the OK button
on the display panel.
5. The LCD will display the status of the copying process.
Copy
15%
450M
68M
ENT
ESC
0:32
6. When Copy is complete LCD will display the following status:
Total: 11/0
Pass 11
ENT
ESC
Fail 0
If the Copy fails, the LCD will display the number of flash drives that
failed and passed.
7. When Copy is complete the Compare portion will automatically begin.
The LCD will display the status of the copying process.
Compare
15%
925M
0:18 226M
ENT
ESC
8. When Compare is complete the display will show the total, and the
number that pass and fail.
Total OK: 5 OK: 5 NG: 0
1:03 OK: 5 NG: 0
ENT
ESC
Note: When Copy+Compare is in process the Green LED on the front
panel is blinking. Do not take out the drive while it is working. When
Copy+Compare is finished the Green LED stays on (no blinking). If an
error occurs during the process a Red LED will display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
Asynchronous Copy+Compare
Asynchronous Copy+Compare is used only when the source content
is the same as or less than the system buffer (256MB). With the source
content read into the systems buffer you can copy and compare flash drives
continuously by taking out the drive which has finished its Copy+Repair
cycle, and replacing it with another blank. This process is repeated until the
Copy+Compare job is complete.
1. Load the source flash drive into the USB Duplicator. Use the UP or
DOWN arrow to scroll through the menu until Copy+Compare is
displayed on the LCD screen.
USB Duplicator
ENT
ESC
3. Copy+Compare
2. Press the OK button on the display panel. The USB Duplicator will
start to read the source content into the system’s buffer and immediately
start copying any loaded target USB flash drives.
USB(58M) 450M
Reading...
ENT
ESC
3. Load the blank target flash drives into the USB Duplicator. The LCD
will display the number of blank media loaded and copying.
Pass: 0
Fail: 0
Working
3
ENT
ESC
Note: When copying is in process the Green LED on the front panel is
blinking. Do not take out the drive while it is copying. When copying is
finished the Green LED stays on (no blinking). If an error occurs during
the copy process a Red LED will display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Asynchronous Copy+Compare - continued
4. If the Copy fails, the LCD will display the number of flash drives that
failed and passed.
Pass: 5
Fail: 0
Working
2
ENT
ESC
Note: During Asynchronous Copying you can use the UP and DOWN
arrow keys to check each flash drives copying status.
5. When Copy is complete the Compare portion will automatically begin.
The LCD will display the status of the copying process.
Compare
15%
925M
0:18 226M
ENT
ESC
6. When Compare is complete the display will show the total, and the
number that pass and fail.
Total OK: 5 OK: 5 NG: 0
1:03 OK: 5 NG: 0
ENT
ESC
When Copy+Compare is finished with any of the target drives you
can take out the finished drive and put another blank flash drive for
Copy+Compare.
Note: When Copy+Compare is in process the Green LED on the front
panel is blinking. Do not take out the drive while it is working. When
Copy+Compare is finished the Green LED stays on (no blinking). If an
error occurs during the process a Red LED will display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Capacity Check
This function will check the capacity of each flash drive inserted. When
finished the following screen will appear.
Pass: 12
Fail: 0
Capacity
0
ENT
ESC
Using the UP and DOWN arrows, you can scroll thru each drive
loaded to display capacity.
[#01] SIZE: 953M
Capacity OK
ENT
ESC
Information
This function includes 2 subfunctions. These are:
5.1 USB Info
5.2 System Info
USB Duplicator
5. Information
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
5.1 USB Info.
USB Info is a function that displays the USB flash drives basic information
such as flash type, content size, and available space.
1. Use UP or DOWN arrow to scroll through the menu until Information
is displayed on the LCD screen.
5. Information
1. USB Info
Press the OK button to select or press ESC to go to the next setting.
2. Press OK to get USB Info. You can scroll through each drive with
the arrow keys. Press ESC when finished. The LCD will display the
following status:
01
FAT 16
USB 953M
925M
5.2 System Info.
1. Use UP or DOWN arrow to scroll through the menu until System
Information is displayed on the LCD screen.
5. Information
2. System Info
2. Press the DOWN arrow to get to System Info. and press OK.
Press ESC twice to return to the Main Menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Utility
The main menu Utility function has 6 subfunctions. These are:
6.1 Format FAT
6.2 Measure Speed
6.3 Media Check
USB Duplicator
6. Utility
6.4 Quick Erase USB
6.5 Full Erase USB
6.6 System Update
6.7 Calc. Checksum
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
6.1 Format FAT
This function is used to format flash drives with the duplicator. If the
original format is FAT, then the format operation will not change the format,
but will write over any data on the flash drive.
If the format is not FAT (e.g. NTFS, Linux, or FAT multi-partition) the
controller will check the capacity of the flash drive. If the capacity is greater
than 2GB, it will automatically use FAT 32 format. If the capacity is less
than 2GB, it will use FAT 16.
1. Load the flash drives into the USB Duplicator. Use the UP or DOWN
arrow to scroll through the menu until Utility is displayed on the LCD
screen.
USB Duplicator
6. Utility
2. Use the UP and DOWN arrow keys to check the status of any of the
flash drives loaded in the machine. Drives inserted in the first port
(source) will not be formatted.
[Utility]
1. Format FAT
Do FORMAT
Confirm?
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
6.2 Measure Speed
This function will measure the read and write speeds of drives loaded in the
ports.
1. Load drives. Use UP or DOWN arrow to scroll through the menu until
Utility is displayed on the LCD screen. Press the OK button to select or
press ESC to go to the next setting.
USB Duplicator
6. Utility
2. Press OK and scroll to Measure Speed. The LCD will display the
following status:
[Utility]
2. Measure Speed
3. Use the UP and Down arrow keys to check each drive.
[#2] Read: 21.7MB
Write: 10.7 MB
Port position
6.3 Media Check
This function is used to check flash drives with the controller. There are
2 types of checks that can be performed. Safe and Normal. The area to be
examined can be set for each check.
1. Load drives. Use UP or DOWN arrow to scroll through the menu until
Utility is displayed on the LCD screen. Press the OK button to select or
press ESC to go to the next setting.
USB Duplicator
6. Utility
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
2. Press OK and scroll to Media Check. The LCD will display the
following status:
[Utility]
3. Media Check
3. Use UP or DOWN arrow to scroll through the available options:
6.3.1 Safe Check
This function will read all the data on the flash drive with no writing so
as to preserve all of the data and format on the drive. Use the UP and
Down arrow keys to check the results on all of the drives loaded.
[Media Check]
1. Safe 100%
(percentage of drive tested)
6.3.2 Normal Check
The controller will read and write in each area of the drive. If one of the
areas cannot be written to or read, the display will show an error. Use the
UP and Down arrow keys to check the results on all of the drives loaded.
Note: All data and formats will be destroyed with the Normal Check.
[Media Check]
2. Normal 100%
(percentage of drive tested)
6.3.3 Setup Range
This function will adjust the percentage of the drive tested in the Safe
and Normal Checks. Use the Up and Down arrow keys to change the
percentage tested.
[Media Check]
3. Setup Range
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
6.4 Quick Erase USB
Quick Erase USB is a function that can quickly erase the target USB flash
drive.
Note: The Quick Erase USB function will only erase the FAT table index
of each target flash drives.
1. Use UP or DOWN arrow to scroll through the menu until Utility is
displayed on the LCD screen. Press the OK button to select or press
ESC to go to the next setting.
USB Duplicator
6. Utility
2. Press OK and scroll to Quick Erase USB. The LCD will display the
following status:
6. Utility
4. Quick Erase USB
3. Press OK to select. The LCD will display the following status:
Do Erase All
Confirm?
Press OK for Yes or ESC for No.
4. LCD display will show the following screen when finished.
Pass: 2
Fail: 0
Working
0
Note: This function will erase the flash drive’s data content. It will not
erase the flash drive’s FAT 16/32 format. If the format of the target drive
is not FAT 16/32, the Quick Erase won’t execute.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
6.5 Full Erase USB
Full Erase USB is a function what will erase all data on the target USB flash
drive.
Note: The Full Erase USB will completely erase data of each of the target
flash drives This function will also clear the FAT table in the flash drive.
You will not be able to read the flash drive on PC until it is re-formatted.
1. Use UP or DOWN arrow to scroll through the menu until Utility is
displayed on the LCD screen. Press the OK button to select or press
ESC to go to the next setting.
USB Duplicator
6. Utility
2. Press OK and scroll to Full Erase USB. The LCD will display the
following status:
6. Utility
5. Full Erase USB
3. Press OK to select. The LCD will display the following status:
Do Erase All
Confirm?
Press OK for Yes or ESC for No.
4. LCD display will show the following screen when finished.
Pass: 2
Fail: 0
Working
0
6.6 System Update
This function is used to update your systems firmware. (Contact Aleratec
Technical Support for the latest version.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
6.7 Calc. Checksum
The Calculate Checksum function computes a checksum for the contents
of the source drive. This alphanumeric can be used to ensure that no minor
changes due to alteration or virus have occurred on the source drive since
its last use.
1. Use UP or DOWN arrow to scroll through the menu until Utility is
displayed on the LCD screen. Press the OK button to select or press
ESC to go to the next setting.
USB Duplicator
6. Utility
2. Press OK and scroll to Calc. Checksum. The LCD will display the
following status:
6. Utility
7. Calc. Checksum
3. Press OK to select. Depending on content, some time will be spent
calculating the Checksum. Once done, the LCD will display the
calculated Checksum.
Checksum=
AE5277D9
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
Main Menu
Setup
This function includes 8 subfunctions. These are:
7.1 Start-up Menu
7.2 Copy Area
7.3 Button Beep
7.4 Asyn Hold Time
7.5 Ignore Size
USB Duplicator
7. Setup
7.6 Asynchronous
Enable/Disable
7.7 Language
7.8 Working Mode
Normal/Turbo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
7.1 Startup Menu
Startup Menu allows you to select which function displays first when the USB
Duplicator is turned on.
This function selects the menu item that will be the first item shown on the
display when you turn on the duplicator. The default setting is Copy.
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press OK.
USB Duplicator
7. Setup
2. Use the UP or Down arrow to scroll through the Setup options until Startup
Menu is displayed on the LCD screen.
7. Setup:
1. Startup Menu
Startup Menu
1. Copy
7.2 Copy Area
This function supports the selection of Quick Copy or Copy whole area of the
source.
7.2.1 Only Data area – Quick Copy
If the controller system can verify FAT 16, 32, NTFS, Linux Ext 2, Ext
3 format for the source, the system will copy just the data area when
this function is selected. If it cannot verify the format, the system will
automatically copy the whole area of the source. For example, if a 2GB
source is FAT 32 and it has 50MB of data, the system will copy only the
50MB of data.
7.2.2 Whole area – Controller will copy whole area of the source.
If the source is not FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format, the
system will copy the entire media, even the blank area. When this function
is selected, Quick Copy will not be used. The copy process takes longer.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
7.3 Button Beep
This setting controls the button sound.
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press the OK.
USB Duplicator
7. Setup
2. Use the UP or Down arrow to scroll through the Setup options until
Button Beep is displayed on the LCD screen.
7. Setup:
3. Button Beep
3. Default setting is ON. Use the UP or DOWN arrows to select either ON
or OFF. Press the OK button to change, or ESC to exit.
Button Beep
On
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
7.4 Asyn Hold Time
This function allows you to set the time to exit Asynchronous Copying
when you pull all the USB flash drives out of the duplicator. The default
setting is 30 seconds. If after 30 seconds no new drives are plugged into
the USB Duplicator the LCD will ask to exit Asynchronous or to stay in
Asynchronous mode. Press OK to exit Asynchronous Copying or press
ESC to keep this status.
To change the default setting for Asyn Hold Time use the following
procedure:
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press the OK button to select.
USB Duplicator
7. Setup
2. Use the UP or Down arrow to scroll through the Setup options until
Asyn Hold Time is displayed on the LCD screen. Press OK.
7. Setup:
4. Asyn Hold Time
3. Default setting is 30 seconds; press the arrow keys to change. Press
ESC to exit.
Asyn Hold Time
30sec.
7.5 Ignore Size
To make sure the FAT table of each flash drive was copied correctly all
source and target flash drives should be the same capacity. Each flash drive
potentially has some capacity difference due to the manufacturing process.
To ensure both the source and target flash drives are at the same capacity
you can set the capacity tolerance. This function is used to set the tolerance
% of flash capacity difference between source and targets.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
7.5 Ignore Size - continued
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press the OK button to select or press
ESC to go to the next setting.
USB Duplicator
7. Setup
2. Use the UP or Down arrow to scroll through the options until Ignore
Size is displayed on the LCD screen. Press OK.
7. Setup:
5. Ignore Size
3. Default setting is 3% ; press the arrow keys to change and press OK.
Ignore Size
3%
Note: Source flash drive and blank drives need to be the same capacity for two reasons.
1. During the copy process the source flash drive “index sector” is copied to
the target flash drive. The index sector of a flash drive contains the drives
specifications, size and FAT table. Different drive sizes will have different index
sectors. For example if your are copying a 2G source flash drive to a 4G target
flash drive without performing data transforming, the index sector of the 2G
source would be copied to the 4G target flash drive effectively changing it to a 2G
flash drive because of the copied 2G index sector.
2. If you allow the system to execute data transforming from a source flash drive to
multiple target flash drive in addition to longer copying time there is a potential for
data loss during data transforming.
Note: If you need to copy a source flash to a target with a big capacity difference there
are two ways to avoid potential problems.
1. Use the Setup function Ignore Size to increase the tolerance % of the source and
target.
2. Turn the Setup function Analyze Source to OFF.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Duplicator
7.6 Asynchronous (Enable/Disable)
This function allows the user to enable/disable asynchronous copying. Use
Up and Down arrow keys to toggle between and push OK to select, or ESC
to exit.
7.7 Language
This function selects the language shown on the display (English,
Traditional Chinese, Simplified Chinese, and Japanese).
To change the default setting for Asyn Hold Time use the following
procedure:
1. Use the UP or DOWN arrow to scroll through the menu until Setup is
displayed on the LCD screen. Press the OK button to select or press
ESC to go to the next setting.
USB Duplicator
7. Setup
2. Use the UP or Down arrow to scroll through the options until Language
is displayed on the LCD screen.
7. Setup:
7. Language
3. To select, press the OK button, or ESC to exit.
7.8 Working Mode (Normal/Turbo)
This function allows the user to select between Normal and Turbo working
modes. Select using the Up and Down arrow keys and push OK.
Note: Turbo Mode is faster but it will copy errors. Normal speed is safer.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Operating Type
• Stand-alone (No PC Required)
• 11
Number of Targets
Supported Media
• USB Flash/Pen Drive requiring less than 500mA
from USB Port
Transfer Speed
• 128MB/min Typical
• Synchronous or Asynchronous
• 2 x 16 Backlit
Copy Mode
LCD Display
Power Requirements
Operating Temperature
Operating Humidity
• 115V or 230V
• 41°F - 122°F
• 15% - 90%
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
After reading this User Guide, if you need additional assistance with this
product, please contact Aleratec Technical Support. Our technical staff will
be happy to assist you, but they may need your help to better assist you.
Calling Aleratec Technical Support without all the necessary information
can be both time consuming and frustrating. Therefore, please try to have
the following information ready before calling:
1. Part Number - the part number is located on the bottom of the 1:11
USB Copy Cruiser SA.
2. Serial Number - the serial number is located on the bottom of the 1:11
USB Copy Cruiser SA.
3. Troubles - your questions about the 1:11 USB Copy Cruiser SA. Please
provide enough information about your problems so our technical staff
can recreate and diagnose it.
Technical Support Addresses and Phone Numbers
X
X
By e-mail: [email protected]
By Telephone: 1-818-678-0484
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific
Time, Monday through Friday, excluding U.S. holidays.
Please try to call from a phone near your computer system.
X
Access is available 24 hours a day, 365 days a year, via:
The World Wide Web at: www.aleratec.com
FAX at: 1-818-678-0483
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support
Aleratec, Inc., Limited Warranty
This Limited Warranty covers defects encountered in the course of
normal use of this product and does not apply to damage from improper
use, abuse, accidents, unauthorized service, or inadequate packaging
when shipping the product to Aleratec, Inc.
Aleratec, Inc. provides the following limited warranty for this product
only if the product was originally purchased for use, not re-sale, from
Aleratec, Inc., an Aleratec, Inc. authorized dealer or distributor, or any
other Aleratec, Inc. approved reseller for this product. This product is
warranted to be free from defects in workmanship and material for a
period of one year from the date of your original purchase.
If the product fails during normal and proper use within the warranty
period, Aleratec, Inc. will, at its option, repair or replace the product at
no cost (except shipping and insurance). This limited warranty does not
include service to repair damage from improper installation, accident,
disaster, misuse, abuse, or modifications to the subsystem, or by any
other causes unrelated to defective materials or workmanship.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support
Please Note:
This Warranty is valid only within the United States and Puerto Rico,
and applies only to products that are new and unopened on the date
of purchase. For areas outside the United States and Puerto Rico,
contact the authorized dealer from whom you purchased this product to
determine which warranty, if any, applies.
THIS LIMITED WARRANTY CONSTITUTES YOUR SOLE AND
EXCLUSIVE REMEDY, AND THE SOLE AND EXCLUSIVE
LIABILITY OF ALERATEC, INC., AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OF ITEMS FOR A PARTICULAR PURPOSE.
Your sole remedy shall be repair or replacement, with new or
refurbished components, as provided in this Limited Warranty.
Aleratec, Inc. shall not be liable for any direct, indirect, special
incidental products or consequential damages, including, but not
limited to, any loss of data or loss of profits or business, regardless of
the form of action or theory of liability resulting from any defect in,
or use of, this product (even if Aleratec, Inc. has been advised of the
possibility of such damages).
In any event, the liability of Aleratec, Inc. under this Limited Warranty,
for damages to you or any third party, regardless of the form of action
or theory of liability, shall not exceed the purchase price you paid for
this product.
Some states do not allow limitations of the disclaimer of implied
warranties, the period an implied warranty lasts, or the exclusion or
limitation of incidental or consequential damages, so the exclusions and
limitations stipulated in this Limited Warranty may not apply to you.
This Limited Warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support
To Obtain Warranty Service:
You must ship your subsystem to the authorized dealer where your
subsystem was purchased within the one year warranty period and
no later than thirty days after discovery of claimed defect, whichever
occurs first. In either case, you must provide proof of original purchase
before any warranty service can be performed. Products and parts
provided as a result of warranty service may be other than new but
will be in good working order and become your property at the time of
exchange. At the same time, the exchanged products or parts become
the property of Aleratec, Inc.
When shipping the subsystem for service, you agree to insure the
Duplicator, to prepay shipping charges, and to use the original shipping
container or equivalent. Any service outside the scope of this limited
warranty shall be at Aleratec, Inc.’s or its Authorized Service Provider’s
rates and terms then in effect.
This warranty gives you specific legal rights; you may also have other
rights which vary from state to state.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support FAX Back Form
Aleratec, Inc.
Technical Support Fax Back Form
Please record the following information to help expedite any warranty claim:
Model No.: _____________ Serial No.: ____________________________
Date Purchased ________________________________________________
Place of Purchase:______________________________________________
To: Technical Support Group FAX: 1-818-678-0483
FROM: _____________________FAX: ____________________________
E-MAIL ________________________
RE: ________________________TEL: ____________________________
DATE: _______________# OF PAGES: ____________________________
I am experiencing the following problems with my USB Duplicator:
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
By answering these questions, your problem will be solved more rapidly.
com on the internet.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Number: 330107_ENG_Rev. A
Copyright © 2010
Specifications subject to change without notice.
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|