Agilen t Tech n ologies 8935 Ser ies E 6380A
CDMA Cellu la r /P CS Ba se St a t ion Test Set
GP IB Syn t a x R efer en ce Gu id e
F ir m w a r e Ver sion : B.02.00 a n d a bove
Agilent Part Number E6380-90073
Revision E
P r in t ed in UK
Sep t em ber 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
Manufacturer's Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Safety Considerations for this Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Conventions Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Trademark Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Which Documents are Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using This Dictionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
AFANalyzer subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
:AIN <string>
:AIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
:DEMPhasis <string>
:DEMPhasis? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
:DEMPhasis:GAIN <string>
:DEMPhasis:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
:DETector <string>
:DETector? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
:DETector:PKLocation <string>
:DETector:PKLocation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
:DETector:SETTling <string>
:DETector:SETTling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
:ELResistor <real number>
:ELResistor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
:FILT1| FILTER1 <string>
:FILT1?| FILTER1? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
:FILT2| FILTER2 <string>
:FILT2?| FILTER2? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
:GTIMe <real number>
:GTIMe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
:INPut <string>
:INPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
:INPut:GAIN <string>
:INPut:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
:NOTCh:GAIN <string>
:NOTCh:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:NOTCh:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
:RANGing <string>
:RANGing? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
:SMPoint <string>
:SMPoint? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
:SPEaker:MODE <string>
:SPEaker:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
:SPEaker:VOLume <string>
:SPEaker:VOLume? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
AFG1| AFGENERATOR1 subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
:AM <real number>
:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
:DESTination <string>
:DESTination? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
:FM <real number>
:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
:FREQuency <real number>
:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
:OUTPut <real number>
:OUTPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
AFG2| ENCoder subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
:AM <real number>
:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
:BURSt <integer>
:BURSt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
:DESTination <string>
:DESTination? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
:FILTer <string>
:FILTer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
:FILTer:MODE <string>
:FILTer:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
:FM <real number>
:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
:FREQuency <real number>
:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
:MODE <string>
:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
:OUTPut <real number>
:OUTPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
:PEMPhasis <string>
:PEMPhasis? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:POLarity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
:SEND:MODE <string>
:SEND:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
:SEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
:STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
:AMPS| TACS:BUSY <string>
:AMPS| TACS:BUSY? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
:AMPS| TACS:CHANnel <string>
:AMPS| TACS:CHANnel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
:AMPS| TACS:DATA:AM <real number>
:AMPS| TACS:DATA:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
:AMPS| TACS:DATA:FM <real number>
:AMPS| TACS:DATA:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
:AMPS| TACS:DATA:LEVel <real number>
:AMPS| TACS:DATA:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
:AMPS| TACS:FILLer:DATA1 <string>
:AMPS| TACS:FILLer:DATA2 <string>
:AMPS| TACS:FILLer:DATA1?
:AMPS| TACS:FILLer:DATA2? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
:AMPS| TACS:FILLer:SEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
:AMPS| TACS:FILLer:STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
:AMPS| TACS:FVCMessage <string>
:AMPS| TACS:FVCMessage? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
:AMPS| TACS:MESSage:DATA1 <string>
:AMPS| TACS:MESSage:DATA2 <string>
:AMPS| TACS:MESSage:DATA1?
:AMPS| TACS:MESSage:DATA2? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
:AMPS| TACS:SAT:AM <real number>
:AMPS| TACS:SAT:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
:AMPS| TACS:SAT:FM <real number>
:AMPS| TACS:SAT:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
:AMPS| TACS:SAT:LEVel <real number>
:AMPS| TACS:SAT:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
:AMPS| TACS:STANdard <string>
:AMPS| TACS:STANdard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
:DTMF:FREQuency:COLumn <multiple real number>
:DTMF:FREQuency:COLumn? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
:DTMF:FREQuency:ROW <multiple real number>
:DTMF:FREQuency:ROW? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:DTMF:OFFTime <real number>
:DTMF:OFFTime? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
:DTMF:ONTime <real number>
:DTMF:ONTime? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
:DTMF:SEQuence <string>
:DTMF:SEQuence? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
:DTMF:STANdard <string>
:DTMF:STANdard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
:DTMF:TWISt <real number>
:DTMF:TWISt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
:FGENerator:SUNits <string>
:FGENerator:SUNits? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
:FGENerator:WAVeform <string>
:FGENerator:WAVeform? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
:NAMPs| NTACs:BUSY <string>
:NAMPs| NTACs:BUSY? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
:NAMPs| NTACs:CHANnel <string>
:NAMPs| NTACs:CHANnel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
:NAMPs| NTACs:DSAT:MESS <string>
:NAMPs| NTACs:DSAT:MESS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
:NAMPs| NTACs:DSAT:SEND <string>
:NAMPs| NTACs:DSAT:SEND? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
:NAMPs| NTACs:DSAT:STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
:NAMPs| NTACs[:FOCC]:AM <real number>
:NAMPs| NTACs[:FOCC]:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
:NAMPs| NTACs[:FOCC]:FM <real number>
:NAMPs| NTACs[:FOCC]:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
:NAMPs| NTACs[:FOCC]:LEVel <real number>
:NAMPs| NTACs[:FOCC]:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
:NAMPs| NTACs[:FOCC]:RATE <real number>
:NAMPs| NTACs[:FOCC]:RATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
:NAMPs| NTACs[:FOCC]:FILLer:DATA1 <string>
:NAMPs| NTACs[:FOCC]:FILLer:DATA2 <string>
:NAMPs| NTACs[:FOCC]:FILLer:DATA1?
:NAMPs| NTACs[:FOCC]:FILLer:DATA2? . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
:NAMPS| NTACS[:FOCC]:MESSage:DATA1 <string>
:NAMPS| NTACS[:FOCC]:MESSage:DATA2 <string>
:NAMPS| NTACS[:FOCC]:MESSage:DATA1?
:NAMPS| NTACS[:FOCC]:MESSage:DATA2? . . . . . . . . . . . . . . . . . . . . . . . . . 95
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:NAMPs| NTACs:FVC:MESS <string>
:NAMPs| NTACs:FVC:MESS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
:NAMPs| NTACs:FVC:RATE <real number>
:NAMPs| NTACs:FVC:RATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
:NAMPs| NTACs:FVC:AM <real number>
:NAMPs| NTACs:FVC:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
:NAMPs| NTACs:FVC:FM <real number>
:NAMPs| NTACs:FVC:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
:NAMPs| NTACs:FVC:LEVel <real number>
:NAMPs| NTACs:FVC:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
:NAMPs| NTACs:SEND
:NAMPs| NTACs:SEND? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
:NAMPS| NTACS:STANdard <string>
:NAMPS| NTACS:STANdard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CANalyzer subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
:ACP:POWer:CALibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
:ACP:POWer:FILTer <real number>
:ACP:POWer:FILTer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
:ACP:POWer:OFFSet <real number>
:ACP:POWer:OFFSet? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
:ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
:AUTO:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
:AUTO:POWer:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
:CHANnel:POWer:CALibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
:CHANnel:POWer:FILTer
:CHANnel:POWer:FILTer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
:DARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
:DIRection <string>
:DIRection? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
:EVENt:QUALifier <string>
:EVENt:QUALifier? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
:EVENt:TRIGger <string>
:EVENt:TRIGger? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
:EVENt:TRIGger:DELay <real number>
:EVENt:TRIGger:DELay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
:MODE <string>
:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
:PATH:GAIN <string>
:PATH:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
:PATH:GAIN:MODE <string>
:PATH:GAIN:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:PNINcrement <real number>
:PNINcrement? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
:PNMode <string>
:PNMode? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
:PNOFfset <real number>
:PNOFfset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
:POWer:GAIN <string>
:POWer:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
:POWer:GAIN:MODE <string>
:POWer:GAIN:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
:POWer:SAMPle:TIME <real number>
:POWer:SAMPle:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
:POWer:ZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
:POWer:ZERO:MODE <string>
:POWer:ZERO:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
:SAMPle:TIME <real number>
:SAMPle:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
:SPECial <string>
:SPECial? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
:TRIGger:STATe <string>
:TRIGger:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
CBUFfer subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
:DATA <48 or 72 character hex string>
:DATA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
:FRAMe:COUNt <integer> <real number>
:FRAMe:COUNt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
:FRAMe:STARt <integer>,<real number>
:FRAMe:STARt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
:FRAMe:LOAD <integer>,<real number>
:FRAMe:LOAD? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
:MODE <string>
:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
:STATe <string>
:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
:PATH <string>
:PATH? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CDANalyzer subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
:CONTrol <string>
:CONTrol? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
:CPOWer:CALibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:EVENt:QUALifier <string>
:EVENt:QUALifier? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
:EVENt:TRIGger <string>
:EVENt:TRIGger? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
:EVENt:TRIGger:DELay <real number>
:EVENt:TRIGger:DELay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
:FPOWer:NAVG <integer>
:FPOWer:NAVG? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
:FPOWer:TOFFset <real number>
:FPOWer:TOFFset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
:FPOWer:TOFFset:TRANsfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
:GAIN <string>
:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
:GAIN:MODE <string>
:GAIN:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
:MARKer:POSition <real number>
:MARKer:POSition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
:MEASure <string>
:MEASure? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
:MODE <string>
:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
:PATH:GAIN <real number>
:PATH:GAIN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
:PNINcrement <real number>
:PNINcrement? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
:PNMode <string>
:PNMode? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
:PNOFfset <real number>
:PNOFfset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
:POWer:REFerence <string>
:POWer:REFerence? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
:PUNit <string>
:PUNit? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
:SAMPle:TIME <real number>
:SAMPle:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
:SCALe:PHASe <string>
:SCALe:PHASe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
:SCALe:POWer <string>
:SCALe:POWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
:SCALe:TIME <string>
:SCALe:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:THRShld <real number>
:THRShld? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
:IS2000:CONTrols <string>
:IS2000:CONTrols? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
:IS2000:GAIN:MODE <string>
:IS2000:GAIN:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
:IS2000:GAIN:PATH <real number>
:IS2000:GAIN:PATH? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
:IS2000:GAIN[:SETTing] <string>
:IS2000:GAIN[:SETTing]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
:IS2000:GAIN:VALue? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
:IS2000:MARKer:MODE <string>
:IS2000:MARKer:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
:IS2000:MARKer:POSition <integer>
:IS2000:MARKer:POSition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
:IS2000:MARKer:REFerence <string>
:IS2000:MARKer:REFerence? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
:IS2000:MARKer:SCALe <string>
:IS2000:MARKer:SCALe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
:IS2000:MEASurement:INTerval <real number>
:IS2000:MEASurement:INTerval? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
:IS2000:MEASurement:MODE <string>
:IS2000:MEASurement:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
:IS2000:MEASurement:ORDer <string>
:IS2000:MEASurement:ORDer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
:IS2000:MEASurement[:TYPE] <string>
:IS2000:MEASurement[:TYPE]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
:IS2000:PNUMber:INCRement <integer>
:IS2000:PNUMber:INCRement?
:IS2000:PNumber:INCRement <integer>
:IS2000:PNumber:INCRement? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
:IS2000:PNUMber:MODE <string>
:IS2000:PNUMber:MODE?
:IS2000:PNumber:MODE <string>
:IS2000:PNumber:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
:IS2000:PNUMber:OFFSet <integer>
:IS2000:PNUMber:OFFSet?
:IS2000:PNumber:OFFset <integer>
:IS2000:PNumber:OFFset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
:IS2000:POWer:FAST:NAVG <integer>
:IS2000:POWer:FAST:NAVG? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:IS2000:POWer:UNIT <string>
:IS2000:POWer:UNIT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
:IS2000:THReshold <real number>
:IS2000:THReshold? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
:IS2000:TRIGger:ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
:IS2000:TRIGger:DARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
:IS2000:TRIGger:DELay <real number>
:IS2000:TRIGger:DELay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
:IS2000:TRIGger[:EVENt] <string>
:IS2000:TRIGger[:EVENt]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
:IS2000:TRIGger:QUALifier <string>
:IS2000:TRIGger:QUALifier? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
CGENerator subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
:CONTrol <string>
:CONTrol? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
:DATA:SOURce <string>
:DATA:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
:DATA:RATE <string>
:DATA:RATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
:DIRection <string>
:DIRection? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
:EBNO:LEVel <real number>
:EBNO:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
:EQFilter <string>
:EQFilter? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
:EVENsec <string>
:EVENsec? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
:SPECial <string>
:SPECial? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
CONFigure subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
:BADDress <integer>
:BADDress? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
:BEEPer <string>
:BEEPer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
:BMODe <string>
:BMODe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
:CDMA:MODE <string>
:CDMA:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
:DATE <integer>
:DATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
:KNOB <string>
:KNOB? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:NOTChmode <string>
:NOTChmode? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
:OFLevel:MODE <string>
:OFLevel:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
:OFLevel:ANTenna <real number>
:OFLevel:ANTenna? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
:OFLevel:DUPLex <real number>
:OFLevel:DUPLex? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
:OFLevel:RFINout <real number>
:OFLevel:RFINout? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
:OFRequency <real number>
:OFRequency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
:OMODe <string>
:OMODe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
:OPERation:AUTO
:OPERation:HOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
:PCMCia:CARD:STATus? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
:PCMCia:CARD:TYPE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
:PCMCia:CARD:SIZE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
:PRINt:ADDRess <integer>
:PRINt:ADDRess? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
:PRINt:LINes| LINE <integer>
:PRINt:LINes| LINE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
:PRINt:DESTination| PORTs <string>
:PRINt:DESTination?| PORTs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
:PRINt:FFSTart <string>
:PRINt:FFSTart? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
:PRINt:FFENd <string>
:PRINt:FFENd? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
:PRINt:TITLe <string>
:PRINt:TITLe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
:PRINt:PRINter| HPModel| HPMO <string>
:PRINt:PRINter| HPModel| HPMO? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
:REFerence:INPut:EXTernal <string>
:REFerence:INPut:EXTernal? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
:REFerence:INPut:SELect <string>
:REFerence:INPut:SELect? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
:RFCStandard <string>
:RFCStandard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
:RFDisplay <string>
:RFDisplay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:RFIMped <string>
:RFIMped? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
:SPOR9| SPORT9| SB9| SP9:BAUD <string>
:SPOR9| SPORT9| SB9| SP9:BAUD? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
:SPOR9| SPORT9| SB9| SP9:PARity <string>
:SPOR9| SPORT9| SB9| SP9:PARity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
:SPOR9| SPORT9| SB9| SP9:DATA <string>
:SPOR9| SPORT9| SB9| SP9:DATA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
:SPOR9| SPORT9| SB9| SP9:STOP <string>
:SPOR9| SPORT9| SB9| SP9:STOP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
:SPOR9| SPORT9| SB9| SP9:FCONtrol| FLOW <string>
:SPOR9| SPORT9| SB9| SP9:FCONtrol| FLOW? . . . . . . . . . . . . . . . . . . . . . . 167
:SPOR9| SPORT9| SB9| SP9:IBECho <string>
:SPOR9| SPORT9| SB9| SP9:IBECho? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
:SPOR9| SPORT9| SB9| SP9:IECHo <string>
:SPOR9| SPORT9| SB9| SP9:IECHo? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
:SPOR9| SPORT9| SB9| SP9:MODem:MODE <string>
:SPOR9| SPORT9| SB9| SP9:MODem:MODE? . . . . . . . . . . . . . . . . . . . . . . . . 168
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:NUMBer
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:NUMBer? . . . . . . . . . . . . . 169
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:TIMeout
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:TIMeout? . . . . . . . . . . . . . . 170
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:HDELay
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:HDELay? . . . . . . . . . . . . . . 170
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:RETRy
:SPOR9| SPORT9| SB9| SP9:MODem:CONNect:RETRy? . . . . . . . . . . . . . . . 171
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing1
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing1?
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing2
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing2?
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing3
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:STRing3? . . . . . . . . . . . . 172
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:ECHaracter
:SPOR9| SPORT9| SB9| SP9:MODem:CONFigure:ECHaracter? . . . . . . . . . 172
:SPOR9| SPORT9| SB9| SP9:MODem:SECurity:STATe
:SPOR9| SPORT9| SB9| SP9:MODem:SECurity:STATe? . . . . . . . . . . . . . . . . 173
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:SPOR9| SPORT9| SB9| SP9:MODem:SECurity:PASSword
:SPOR9| SPORT9| SB9| SP9:MODem:SECurity:PASSword? . . . . . . . . . . . . 174
:SPOR9| SPORT9| SB9| SP9:SIN| SINP <string>
:SPOR9| SPORT9| SB9| SP9:SIN| SINP? . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
:SPOR10| SPORT10| SB10| SP10:BAUD <string>
:SPOR10| SPORT10| SB10| SP10:BAUD? . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
:SPOR10| SPORT10| SB10| SP10:PARity <string>
:SPOR10| SPORT10| SB10| SP10:PARity? . . . . . . . . . . . . . . . . . . . . . . . . . . 175
:SPOR10| SPORT10| SB10| SP10:DATA <string>
:SPOR10| SPORT10| SB10| SP10:DATA? . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
:SPOR10| SPORT10| SB10| SP10:STOP <string>
:SPOR10| SPORT10| SB10| SP10:STOP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
:SPOR10| SPORT10| SB10| SP10:FCONtrol| FLOW <string>
:SPOR10| SPORT10| SB10| SP10:FCONtrol| FLOW? . . . . . . . . . . . . . . . . . 177
:SPOR10| SPORT10| SB10| SP10:MODem:MODE <string>
:SPOR10| SPORT10| SB10| SP10:MODem:MODE? . . . . . . . . . . . . . . . . . . . 178
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:NUMBer
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:NUMBer? . . . . . . . . . 179
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:TIMeout
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:TIMeout? . . . . . . . . . 179
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:HDELay
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:HDELay? . . . . . . . . . 180
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:RETRy
:SPOR10| SPORT10| SB10| SP10:MODem:CONNect:RETRy? . . . . . . . . . . 180
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing1
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing1?
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing2
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing2?
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing3
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:STRing3? . . . . . . . 181
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:ECHaracter
:SPOR10| SPORT10| SB10| SP10:MODem:CONFigure:ECHaracter? . . . . . 181
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:SPOR10| SPORT10| SB10| SP10:MODem:SECurity:STATe
:SPOR10| SPORT10| SB10| SP10:MODem:SECurity:STATe? . . . . . . . . . . . . 182
:SPOR10| SPORT10| SB10| SP10:MODem:SECurity:PASSword
:SPOR10| SPORT10| SB10| SP10:MODem:SECurity:PASSword? . . . . . . . . 183
:SPOR11| SPORT11| SB11| SP11:BAUD <string>
:SPOR11| SPORT11| SB11| SP11:BAUD? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
:SPOR11| SPORT11| SB11| SP11:PARity <string>
:SPOR11| SPORT11| SB11| SP11:PARity? . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
:SPOR11| SPORT11| SB11| SP11:DATA <string>
:SPOR11| SPORT11| SB11| SP11:DATA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
:SPOR11| SPORT11| SB11| SP11:STOP <string>
:SPOR11| SPORT11| SB11| SP11:STOP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
:SPOR11| SPORT11| SB11| SP11:FCONtrol| FLOW <string>
:SPOR11| SPORT11| SB11| SP11:FCONtrol| FLOW? . . . . . . . . . . . . . . . . . . 185
:SPOR11| SPORT11| SB11| SP11:MODem:MODE <string>
:SPOR11| SPORT11| SB11| SP11:MODem:MODE? . . . . . . . . . . . . . . . . . . . . 186
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:NUMBer
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:NUMBer? . . . . . . . . . 187
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:TIMeout
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:TIMeout? . . . . . . . . . . 188
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:HDELay
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:HDELay? . . . . . . . . . . 188
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:RETRy
:SPOR11| SPORT11| SB11| SP11:MODem:CONNect:RETRy? . . . . . . . . . . . 189
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing1
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing1?
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing2
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing2?
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing3
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:STRing3? . . . . . . . . 190
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:ECHaracter
:SPOR11| SPORT11| SB11| SP11:MODem:CONFigure:ECHaracter? . . . . . 190
:SPOR11| SPORT11| SB11| SP11:MODem:SECurity:STATe
:SPOR11| SPORT11| SB11| SP11:MODem:SECurity:STATe? . . . . . . . . . . . . 191
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:SPOR11| SPORT11| SB11| SP11:MODem:SECurity:PASSword
:SPOR11| SPORT11| SB11| SP11:MODem:SECurity:PASSword? . . . . . . . . 192
:SPSelect <string>
:SPSelect? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
:SRLocation <string>
:SRLocation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
:TIME <real number>
:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
DECoder subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
:ARM:MODE <string>
:ARM:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
:LEVel:AM <real number>
:LEVel:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
:LEVel:FM <real number>
:LEVel:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
:LEVel:VOLTs <real number>
:LEVel:VOLTs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
:MODE <string>
:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
:POLarity <string>
:POLarity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
:STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
:AMPS| TACS:GATE <real number>
:AMPS| TACS:GATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
:AMPS| TACS:MESSage <string>
:AMPS| TACS:MESSage? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
:AMPS| TACS:STANdard <string>
:AMPS| TACS:STANdard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
:AMPS| TACS:TRIGger:PATTern <string>
:AMPS| TACS:TRIGger:PATTern? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
:DTMF:GATE <real number>
:DTMF:GATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
:FGEN:GATE <real number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
:NAMPs| NTACs:CHANnel <string>
:NAMPs| NTACs:CHANnel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
:NAMPs| NTACs:GATE <real number>
:NAMPs| NTACs:GATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
:NAMPs| NTACs:DTMF:GATE <real number>
:NAMPs| NTACs:DTMF:GATE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
:NAMPs| NTACs:RVC <string>
:NAMPs| NTACs:RVC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:NAMPs| NTACs:STANdard <string>
:NAMPs| NTACs:STANdard? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
:NAMPs| NTACs:TRIGger:PATTern <string>
:NAMPs| NTACs:TRIGger:PATTern? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
DISPlay
DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Integer Number Setting Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
I/Q Plot Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
CONTrols <string>
:CONTrols? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
[:DISPlay]:SCALe <string>
[:DISPlay]:SCALe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
:MEASurement:MODE <string>
:MEASurement:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
:MEASurement:INTerval <real number>
:MEASurement:INTerval? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
:TRIGger:DARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
:TRIGger:DELay <real number>
:TRIGger:DELay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
:TRIGger[:EVENt] <string>
:TRIGger[:EVENt]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
:TRIGger:QUALifier <string>
:TRIGger:QUALifier? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
MEASure subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
:RESet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
:AFRequency:ACLevel <meas cmnd>
:AFRequency:ACLevel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
:AFRequency:AM <meas cmnd>
:AFRequency:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
:AFRequency:DCAM <meas cmnd>
:AFRequency:DCAM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
:AFRequency:DCFM <meas cmnd>
:AFRequency:DCFM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
:AFRequency:DCVolts <meas cmnd>
:AFRequency:DCVolts? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
:AFRequency:DISTortion <meas cmnd>
:AFRequency:DISTortion? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
:AFRequency:FM <meas cmnd>
:AFRequency:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:AFRequency:FREQuency <meas cmnd>
:AFRequency:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
:AFRequency:SELect <meas cmnd>
:AFRequency:SELect? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
:AFRequency:SINAD <meas cmnd>
:AFRequency:SINAD? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
:AFRequency:SNR <meas cmnd>
:AFRequency:SNR? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
:CANalyzer:ADC:APOWeradc:LEVel <meas cmnd>
:CANalyzer:ADC:APOWeradc:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
:CANalyzer:ADC:EVMadc:LEVel <meas cmnd>
:CANalyzer:ADC:EVMadc:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
:CANalyzer:ADC:RHOadc:LEVel <meas cmnd>
:CANalyzer:ADC:RHOadc:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
:CANalyzer:ADC:TPOWeradc:LEVel <meas cmnd>
:CANalyzer:ADC:TPOWeradc:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
:CANalyzer:CARrier:FEEDthrough <meas cmnd>
:CANalyzer:CARrier:FEEDthrough? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
:CANalyzer:ERRor:FREQuency <meas cmnd>
:CANalyzer:ERRor:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
:CANalyzer:ERRor:MAGNitude <meas cmnd>
:CANalyzer:ERRor:MAGNitude? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
:CANalyzer:ERRor:PHASe <meas cmnd>
:CANalyzer:ERRor:PHASe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
:CANalyzer:EVM <meas cmnd>
:CANalyzer:EVM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
:CANalyzer:PNOFfset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
:CANalyzer:POWer:ACP:LRATio <meas cmnd>
:CANalyzer:POWer:ACP:LRATio? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
:CANalyzer:POWer:ACP:URATio <meas cmnd>
:CANalyzer:POWer:ACP:URATio? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
:CANalyzer:POWer:ACP:CENTer <meas cmnd>
:CANalyzer:POWer:ACP:CENTer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
:CANalyzer:POWer:AVG <meas cmnd>
:CANalyzer:POWer:AVG? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
:CANalyzer:POWer:CHANnel <meas cmnd>
:CANalyzer:POWer:CHANnel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
:CANalyzer:RHO <meas cmnd>
:CANalyzer:RHO? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
:CANalyzer:TIME:OFFSet <meas cmnd>
:CANalyzer:TIME:OFFSet? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:CDANalyzer:ADC <meas cmnd>
:CDANalyzer:ADC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
:CDANalyzer:CARRier:FEEDthrough <meas cmnd>
:CDANalyzer:CARRier:FEEDthrough? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
:CDANalyzer:CPOWer <meas cmnd>
:CDANanlyzer:CPOWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
:CDANalyzer:ERRor:FREQuency <meas cmnd>
:CDANalyzer:ERRor:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
:CDANalyzer:ERHo? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
:CDANalyzer:MARKer:APOWer <meas cmnd>
:CDANalyzer:MARKer:APOWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
:CDANalyzer:MARKer:LEVel <meas cmnd>
:CDANalyzer:MARKer:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
:CDANalyzer:MARKer:PHASe <meas cmnd>
:CDANalyzer:MARKer:PHASe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
:CDANalyzer:MARKer:TIME <meas cmnd>
:CDANalyzer:MARKer:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
:CDANalyzer:TIME:OFFSet <meas cmnd>
:CDANalyzer:TIME:OFFSet? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
:CDANalyzer:TRACe:POWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
:CDANalyzer:TRACe:TOFFset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
:CDANalyzer:TRACe:TPOWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
:CDANalyzer:IS2000:ADC <meas cmds>
:CDANalyzer:IS2000:ADC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:CDANalyzer:IS2000:PNumber:OFFSet?
:CDANalyzer:IS2000:PNUMber:OFFSet? . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:I:ACTive?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:COMBined:ACTive?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:QACTive?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:IS2000:ACTive? 244
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:I:ALL?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:COMBined:ALL?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:Q:ALL?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:IS2000:ALL? . . . 245
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:I[:VALue]?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:Q[:VALue]?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:COMBined[:VALue]?
:CDANalyzer:IS2000:TRACe:ABSolute:POWer:COMPlex:IS2000[:VALue]? 246
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:I:ACTive?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:COMBined:ACTive?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:QACTive?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:IS2000ACTive? . . . . . . . . . 253
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:I:ALL?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:COMBined:ALL?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:Q:ALL?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:IS2000:ALL? . . . . . . . . . . . 254
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:I[:VALue]?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:COMBined[:VALue]? . . . . 255
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:Q[:VALue]?
:CDANalyzer:IS2000:TRACe:POWer:COMPlex:IS2000? . . . . . . . . . . . . . . . 256
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:DEC:AMPS| TACS:NBITs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
:DEC:AMPS| TACS:CDATa? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
:DEC:AMPS| TACS:DATA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
:DEC:DTMF:LOW:FREQuency:ABSolute <meas cmnd>
:DEC:DTMF:LOW:FREQuency:ABSolute? . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
:DEC:DTMF:LOW:FREQuency:ERRor <meas cmnd>
:DEC:DTMF:LOW:FREQuency:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
:DEC:DTMF:LOW:FREQuency:DISPlay <string>
:DEC:DTMF:LOW:FREQuency:DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
:DEC:DTMF:HIGH:FREQuency:ABSolute <meas cmnd>
:DEC:DTMF:HIGH:FREQuency:ABSolute? . . . . . . . . . . . . . . . . . . . . . . . . . . 263
:DEC:DTMF:HIGH:FREQuency:ERRor <meas cmnd>
:DEC:DTMF:HIGH:FREQuency:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
:DEC:DTMF:HIGH:FREQuency:DISPlay <string>
:DEC:DTMF:HIGH:FREQuency:DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
:DEC:DTMF:TIME:ON <meas cmnd>
:DEC:DTMF:TIME:ON? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
:DEC:DTMF:TIME:OFF <meas cmnd>
:DEC:DTMF:TIME:OFF? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
:DEC:FGENerator:FREQuency <meas cmnd>
:DEC:FGENerator:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
:DEC:NAMPs| NTACs:NBITs <meas cmnd>
:DEC:NAMPs| NTACs:NBITs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
:DEC:NAMP:DTMF:LOW:FREQuency:ABSolute <meas cmnd>
:DEC:NAMP:DTMF:LOW:FREQuency:ABSolute? . . . . . . . . . . . . . . . . . . . . . 267
:DEC:NAMP:DTMF:LOW:FREQuency:ERRor <meas cmnd>
:DEC:NAMP:DTMF:LOW:FREQuency:ERRor? . . . . . . . . . . . . . . . . . . . . . . . 267
:DEC:NAMP:DTMF:LOW:DISPlay <string>
:DEC:NAMP:DTMF:LOW:DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
:DEC:NAMP:DTMF:HIGH:FREQuency:ABSolute <meas cmnd>
:DEC:NAMP:DTMF:HIGH:FREQuency:ABSolute? . . . . . . . . . . . . . . . . . . . . 268
:DEC:NAMP:DTMF:HIGH:FREQuency:ERRor <meas cmnd>
:DEC:NAMP:DTMF:HIGH:FREQuency:ERRor? . . . . . . . . . . . . . . . . . . . . . . 269
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:DEC:NAMP:DTMF:HIGH:DISPlay <string>
:DEC:NAMP:DTMF:HIGH:DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
:DEC:NAMP:DTMF:TIME:ON <meas cmnd>
:DEC:NAMP:DTMF:TIME:ON? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
:DEC:NAMP:DTMF:TIME:OFF <meas cmnd>
:DEC:NAMP:DTMF:TIME:OFF? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
:DEC:NAMP:DTMF:SYMBol? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
:IQPLot[:DISPlay]:I? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
:IQPLot[:DISPlay]:Q? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
:OSCilloscope:MARKer:LEVel:AM <meas cmnd>
:OSCilloscope:MARKer:LEVel:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
:OSCilloscope:MARKer:LEVel:FM <meas cmnd>
:OSCilloscope:MARKer:LEVel:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
:OSCilloscope:MARKer:LEVel:VOLTs <meas cmnd>
:OSCilloscope:MARKer:LEVel:VOLTs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
:OSCilloscope:MARKer:TIME <meas cmnd>
:OSCilloscope:MARKer:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
:OSCilloscope:TRACe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
:RFRequency:SELect <string>
:RFRequency:SELect? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
:RFRequency:FREQuency:ABSolute <meas cmnd>
:RFRequency:FREQuency:ABSolute? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
:RFRequency:FREQuency:ERRor <meas cmnd>
:RFRequency:FREQuency:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
:RFRequency:POWer <meas cmnd>
:RFRequency:POWer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
:SANalyzer:MARKer:DELTa:FREQuency <meas cmnd>
:SANalyzer:MARKer:DELTa:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . 278
:SANalyzer:MARKer:DELTa:LEVel <meas cmnd>
:SANalyzer:MARKer:DELTa:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
:SANalyzer:MARKer[:NORMal]:FREQuency <meas cmnd>
:SANalyzer:MARKer[:NORMal]:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . 280
:SANalyzer:MARKer[:NORMal]:LEVel <meas cmnd>
:SANalyzer:MARKer[:NORMal]:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
:SANalyzer:TRACe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Number Measurement Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
OSCilloscope subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285
:CONTrol
:CONTrol? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:MARKer:NPEak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
:MARKer:PPEak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
:MARKer:POSition <real number>
:MARKer:POSition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
:SCALe:TIME <string>
:SCALe:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
:SCALe:VERTical:AM <string>
:SCALe:VERTical:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
:SCALe:VERTical:FM <string>
:SCALe:VERTical:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
:SCALe:VERTical:OFFSet <real number>
:SCALe:VERTical:OFFSet? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
:SCALe:VERTical:VOLTs <string>
:SCALe:VERTical:VOLTs? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
:TRIGger:LEVel <real number>
:TRIGger:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
:TRIGger:MODE <string>
:TRIGger:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
:TRIGger:DELay <real number>
:TRIGger:DELay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
:TRIGger:PRETrigger <real number>
:TRIGger:PRETrigger? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
:TRIGger:SENSe <string>
:TRIGger:SENSe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
:TRIGger:SOURce <string>
:TRIGger:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
:TRIGger:TYPE <string>
:TRIGger:TYPE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
PROGram subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
[:SELected]:DEFine <program data>
[:SELected]:DEFine? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
[:SELected]:DELete
[:SELected]:DELete:ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
[:SELected]:EXECute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
[:SELected]:STATe <variable>
[:SELected]:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
[:SELected]:NUMBer <variable>(,<nvalues>)
[:SELected]:NUMBer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
[:SELected]:STRing <variable>(,<nvalues>)
[:SELected]:STRing? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
[:SELected]:WAIT
[:SELected]:WAIT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
RAM Usage Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298
SPEC:RAMDISKALLOC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
SPEC:RAMFORIBASIC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
SPEC:SAVEREGALLOC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
SPEC:TOTALUSERRAM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Real Number Setting Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
[REGister] subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
:CLEar <integer or string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
:CLEar:ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
:RECall <integer or string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
:RECall:LIST? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
:SAVE <integer or string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
:SAVE:LIST? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
:ATTenuator <string>
:ATTenuator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
:ATTenuator:MODE <string>
:ATTenuator:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
:FREQuency <real number>
:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
[:FREQuency]:GTIMe <real number>
[:FREQuency]:GTIMe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
:IFBW <string>
:IFBW? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
:INPut <string>
:INPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
:PMEasurement:DETector <string>
:PMEasurement:DETector? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
:PMEasurement:ZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
:PMEasurement:ZERO:MODE
:PMEasurement:ZERO:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
:SENSitivity <string>
:SENSitivity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
:SQUelch <string>
:SQUelch? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
RFGenerator subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
:AMPLitude <real number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
:ATTenuator <string>
:ATTenuator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:CHANnel <string>
:CHANnel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
:FM:COUPling <string>
:FM:COUPling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
:FM:DCZero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
:FREQuency <real number>
:FREQuency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
:MODulation:AOUT <string>
:MODulation:AOUT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
:MODulation:EXTernal:AM <real number>
:MODulation:EXTernal:AM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
:MODulation:EXTernal:DESTination <string>
:MODulation:EXTernal:DESTination? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
:MODulation:EXTernal:FM <real number>
:MODulation:EXTernal:FM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
:OUTPut <string>
:OUTPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
:ATTenuator <string>
:ATTenuator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
:ATTenuator:MODE <string>
:ATTenuator:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
:CFRequency <real number>
:CFRequency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
:CONTrol <string>
:CONTrol? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
:DISPlay:SCALe <string>
:DISPlay:SCALe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
:INPut <string>
:INPut? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
:MARKer:DELTa:NPEak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
:MARKer:DELTa:NPLevel <real number>
:MARKer:DELTa:NPLevel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
:MARKer:DELTa:PEAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
:MARKer:DELTa:POSition <real number>
:MARKer:DELTa:POSition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
:MARKer:MODE <string>
:MARKer:MODE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:MARKer[:NORMal]:NPLevel <real number>
:MARKer[:NORMal]:NPLevel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
:MARKer[:NORMal]:PEAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
:MARKer[:NORMal]:POSition <real number>
:MARKer[:NORMal]:POSition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
:MARKer:REFmode
:MARKer:REFmode? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
:MASK:BEEP
:MASK:BEEP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
:MASK:DISPlay
:MASK:DISPlay? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
:MASK:FIXed:LOWer:POINts:NUMBer
:MASK:FIXed:LOWer:POINts:NUMBer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
:MASK:FIXed:LOWer:POINts:LEVEL1(through LEVEL15)
:MASK:FIXed:LOWer:POINts:LEVEL1? (through LEVEL15) . . . . . . . . . . . 322
:MASK:FIXed:LOWer:POINts:FREQuency1 (through FREQ15)
:MASK:FIXed:LOWer:POINts:FREQuency1? (through FREQ15) . . . . . . . . 323
:MASK:FIXed:UPPer:POINts:NUMBer
:MASK:FIXed:UPPer:POINts:NUMBer? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
:MASK:FIXed:UPPer:POINts:EDIT
:MASK:FIXed:UPPer:POINts:EDIT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
:MASK:FIXed:UPPer:POINts:LEVEL1 (through LEVEL15)
:MASK:FIXed:UPPer:POINts:LEVEL1? (through LEVEL15) . . . . . . . . . . . 324
:MASK:FIXed:UPPer:POINts:FREQuency1 (through FREQ15)
:MASK:FIXed:UPPer:POINts:FREQuency1? (through FREQ15) . . . . . . . . . 325
:MASK:RELative:LOWer:POINts:NUMBer
:MASK:RELative:LOWer:POINts:NUMBer? . . . . . . . . . . . . . . . . . . . . . . . . . 325
:MASK:RELative:LOWer:POINts:EDIT
:MASK:RELative:LOWer:POINts:EDIT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
:MASK:RELative:LOWer:POINts:LEVEL1 (through LEVEL15)
:MASK:RELative:LOWer:POINts:LEVEL1? (through LEVEL15) . . . . . . . . 326
:MASK:RELative:LOWer:POINts:FREQuency1 (through FREQ15)
:MASK:RELative:LOWer:POINts:FREQuency1? (through FREQ15) . . . . . 327
:MASK:RELative:UPPer:POINts:NUMBer
:MASK:RELative:UPPer:POINts:NUMBer? . . . . . . . . . . . . . . . . . . . . . . . . . 327
:MASK:RELative:UPPer:POINts:LEVEL1 (through LEVEL15)
:MASK:RELative:UPPer:POINts:LEVEL1? (through LEVEL15) . . . . . . . . 328
:MASK:RELative:UPPer:POINts:FREQuency1 (through FREQ15)
:MASK:RELative:UPPer:POINts:FREQuency1? (through FREQ15) . . . . . . 329
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:MASK:TYPE
:MASK:TYPE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
:RFGenerator <string>
:RFGenerator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
:RLEVel <real number>
:RLEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
:SPAN <real number>
:SPAN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
:TGENerator:AMPLitude <real number>
:TGENerator:AMPLitude? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
:TGENerator:DESTination <string>
:TGENerator:DESTination? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
:TGENerator:OFRequency <real number>
:TGENerator:OFRequency? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
:TGENerator:SWEep <string>
:TGENerator:SWEep? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
:TRACe:MHOLd <string>
:TRACe:MHOLd? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
:TRACe:NORMalize <string>
:TRACe:NORMalize? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
:TRACe:SAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
STATus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
:PRESet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
:CALibration:ENABle
:CALibration:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
:CALibration:NTRansition
:CALibration:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
:CALibration[:EVENt?]:PTRansition
:CALibration[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
:COMMunicate:ENABle
:COMMunicate:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
:COMMunicate[:EVENt?]:NTRansition
:COMMunicate[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
:COMMunicate[:EVENt?]:PTRansition
:COMMunicate[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
:HARD1:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
:HARD1:ENABle
:HARD1:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:HARD1[:EVENt?]:NTRansition
:HARD1[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
:HARD1[:EVENt?]:PTRansition
:HARD1[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
:HARD2:CONDition
:HARD2:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
:HARD2:ENABle
:HARD2:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
:HARD2[:EVENt?]:NTRansition
:HARD2[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
:HARD2[:EVENt?]:PTRansition
:HARD2[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
:OPERation:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
:OPERation:ENABle
:OPERation:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
:OPERation[:EVENt?]:NTRansition
:OPERation[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
:OPERation[:EVENt?]:PTRansition
:OPERation[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
:CALibrating:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
:CALibrating:ENABle
:CALibrating:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
:CALibrating[:EVENt?]:NTRansition
:CALibrating[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
:CALibrating[:EVENt?]:PTRansition
:CALibrating[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
:QUEStionable:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
:QUEStionable:ENABle
:QUEStionable:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
:QUEStionable[:EVENt?]:NTRansition
:QUEStionable[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
:QUEStionable[:EVENt?]:PTRansition
:QUEStionable[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
:MEASuring:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
:MEASuring:ENABle
:MEASuring:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
:MEASuring[:EVENt?]:NTRansition
:MEASuring[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
:MEASuring[:EVENt?]:PTRansition
:MEASuring[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
:CDMA1:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten t s
:CDMA1:ENABle
:CDMA1:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
:CDMA1[:EVENt?]:NTRansition
:CDMA1[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
:CDMA1[:EVENt?]:PTRansition
:CDMA1[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
:IBASic:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
:IBASic:ENABle
:IBASic:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
:IBASic[:EVENt?]:NTRansition
:IBASic[:EVENt?]:NTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
:IBASic[:EVENt?]:PTRansition
:IBASic[:EVENt?]:PTRansition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
SYSTem:[ERRor?] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
TRIGger subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
:ABORt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
:IMMediate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
:MODE:RETRigger
:MODE:RETRigger? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
29
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
R egu la tor y In for m a t ion
Ma n u fa ctu r er 's Decla r a t ion
This statement is provided to comply with the requirements of the
German Sound Emission Directive, from 18 J anuary 1991.
This product has the following sound pressure emission specification:
•
•
•
•
sound pressure Lp <70 dB(A)
at the operator position
under normal operation
according to ISO 7779:1988/EN 27779:1991 (Type Test).
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den Anforderungen der
Maschinenlärminformationsverordnung vom 18 J anuar 1991.
•
•
•
Schalldruckpegel Lp < 70 dB(A).
Am Arbeitsplatz.
Normaler Betrieb.
•
Nach ISO 7779:1988/EN 27779:1991 (Typprüfung).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Sa fet y
GENERAL
This product and related documentation must be reviewed for
familiarization with safety markings and instructions before operation.
This product has been designed and tested in accordance with IEC
Publication 1010, "Safety Requirements for Electronic Measuring
Apparatus," and has been supplied in a safe condition. This instruction
documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the
product in a safe condition.
SAFETY SYMBOLS
Indicates instrument damage can occur if indicated operating limits are
exceeded. Refer to the instructions in this guide.
!
Indicates hazardous voltages.
Indicates earth (ground) terminal
WARNING
CAUTION
A WAR NING n ot e d en ot es a h a za r d . It ca lls a t t en t ion t o a
p r oced u r e, p r a ct ice, or t h e lik e, w h ich , if n ot cor r ect ly
p er for m ed or a d h er ed t o, cou ld r esu lt in p er son a l in ju r y. Do n ot
p r oceed b eyon d a WARNING sign u n t il t h e in d ica t ed con d it ion s
a r e fu lly u n d er st ood a n d m et .
A CAUTION note denotes a hazard. It calls attention to an operation
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in damage to or destruction of part or all of the
product. Do not proceed beyond an CAUTION note until the indicated
conditions are fully understood and met.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Sa fet y Con sid er a tion s for t h is
In st r u m en t
SAFETY EARTH GROUND
A uninterruptible safety earth ground must be provided from the main
power source to the product input wiring terminals, power cord, or
supplied power cord set.
CHASSIS GROUND TERMINAL
To prevent a potential shock hazard, always connect the rear-panel
chassis ground terminal to earth ground when operating this
instrument from a dc power source.
WARNING
Th is p r od u ct is a Sa fet y Cla ss I in st r u m en t (p r ovid ed w it h a
p r ot ect ive ea r t h in g gr ou n d in cor p or a t ed in t h e p ow er cor d ).
Th e m a in s p lu g sh a ll on ly b e in ser t ed in a sock et ou t let
p r ovid ed w it h a p r ot ect ive ea r t h con t a ct . An y in t er r u p t ion of
t h e p r ot ect ive con d u ct or in sid e or ou t sid e of t h e p r od u ct is
lik ely t o m a k e t h e p r od u ct d a n ger ou s. In t en t ion a l in t er r u p t ion
is p r oh ib it ed .
!
Th is p r od u ct is n ot in t en d ed for u se in w et or d a m p
en vir on m en t s. Do n ot exp ose t h is p r od u ct t o excessive
m oist u r e. Op er a t e t h is p r od u ct on ly w it h in t h e t em p er a t u r e
a n d h u m id it y r a n ges sp ecified in t h e u ser ’s m a n u a l.
!
!
Th is in st r u m en t is eq u ip p ed w it h in t er n a l gr ou n d fa u lt cir cu it
in t er r u p t er cla ss A.
•
•
•
•
Th is d evice d oes n ot p r ot ect a ga in st elect r ica l sh ock d u e t o
con t a ct w it h b ot h cir cu it con d u ct or s or a fa u lt in su p p ly
w ir in g t o p r od u ct .
Do n ot u se ext en sion cor d t o con n ect t h is p r od u ct t o p ow er
r ecep t a cle. At t en t ion -n e p a s u t iliser d e r a llon ge p ou r
r a ccor d er le d et ect eu r -d isjon ct eu r a la p r ise d e cou r a n t .
Rep la ce cor d set on ly w it h Agilen t Tech n ologies 8120 ser ies.
At t en t ion - R em p la cer u n iq u em en t p a r u n cor d on a m ovib le
n u m er o 8120.
Do n ot u se in w et loca t ion . Ne p a s u t iliser d a n s u n
em p la cem en t m ou ille.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Wh en ever it is lik ely t h a t t h e p r ot ect ion h a s b een im p a ir ed , t h e
in st r u m en t m u st b e m a d e in op er a t ive a n d b e secu r ed a ga in st
a n y u n in t en d ed op er a t ion .
If t h is in st r u m en t is t o b e en er gized via a n a u t ot r a n sfor m er (for
volt a ge r ed u ct ion ), m a k e su r e t h e com m on t er m in a l is
con n ect ed t o t h e ea r t h t er m in a l of t h e p ow er sou r ce.
If t h is p r od u ct is n ot u sed a s sp ecified , t h e p r ot ect ion p r ovid ed
b y t h e eq u ip m en t cou ld b e im p a ir ed . Th is p r od u ct m u st b e u sed
in a n or m a l con d it ion (in w h ich a ll m ea n s for p r ot ect ion a r e
in t a ct ) on ly.
No op er a t or ser vicea b le p a r t s in t h is p r od u ct . Refer ser vicin g
t o q u a lified p er son n el. To p r even t elect r ica l sh ock , d o n ot
r em ove cover s.
Ser vicin g in st r u ct ion s a r e for u se b y q u a lified p er son n el on ly.
To a void elect r ica l sh ock , d o n ot p er for m a n y ser vicin g u n less
you a r e q u a lified t o d o so.
Th e op en in g of cover s or r em ova l of p a r t s is lik ely t o exp ose
d a n ger ou s volt a ges. Discon n ect t h e p r od u ct fr om a ll volt a ge
sou r ces w h ile it is b ein g op en ed .
Ad ju st m en t s d escr ib ed in t h e m a n u a l a r e p er for m ed w it h
p ow er su p p lied t o t h e in st r u m en t w h ile p r ot ect ive cover s a r e
r em oved . E n er gy a va ila b le a t m a n y p oin t s m a y, if con t a ct ed ,
r esu lt in p er son a l in ju r y.
Th e p ow er cor d is con n ect ed t o in t er n a l ca p a cit or s t h a t m y
r em a in live for 5 secon d s a ft er d iscon n ect in g t h e p lu g fr om it s
p ow er su p p ly.
F or Con t in u ed p r ot ect ion a ga in st fir e h a za r d , r ep la ce t h e lin e
fu se(s) w it h T 250 V 5.0 A fu se(s) or t h e sa m e cu r r en t r a t in g a n d
t yp e (for exa m p le, n or m a l b low or t im e d ela y). Do n ot u se
r ep a ir ed fu ses or sh or t cir cu it ed fu seh old er s.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Always use the three-prong ac power cord supplied with this product.
Failure to ensure adequate earth grounding by not using this cord may
cause personal injury and/or product damage.
This product is designed for use in Installation Category II and
Pollution Degree 2 per IEC 1010 and IEC 664 respectively. For indoor
use only.
This product has autoranging line voltage input, be sure the supply
voltage is within the specified range.
Ventilation Requirements: When installing the product in a cabinet, the
convection into and out of the product must not be restricted. The
ambient temperature (outside the cabinet) must be less than the
maximum operating temperature of the product by 4° C for every 100
watts dissipated in the cabinet. If the total power dissipated in the
cabinet is greater than 800 watts, then forced convection must be used.
To prevent electrical shock, disconnect instrument from mains (line)
before cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
Product
Markings
CE - the CE mark is a registered trademark of the European Union. A
CE mark accompanied by a year indicated the year the design was
proven.
CSA - the CSA mark is a registered trademark of the Canadian
Standards Association.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Cer tifica tion
Agilent Technologies certifies that this product met its published
specifications at the time of shipment from the factory. Agilent further
certifies that its calibration measurements are traceable to the United
States National Institute of Standards and Technology, to the extent
allowed by the Institute’s calibration facility, and to the calibration
facilities of other International Standards Organization members.
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
Agilent Technologies
Manufacturer’s Address:
Spokane Site
24001 E. Mission Avenue
Liberty Lake, Washington 99019-9599
declares that the product
Product Name:
Agilent Technologies 8935 CDMA Cellular/PCS
Base Station Test Set
Model Number:
Agilent Technologies E6380A
Product Options:
conforms to the following Product specifications:
Safety: IEC 1010-1:1990+A1 / EN 61010-1:1993
EMC:
CISPR 11:1990/EN 55011:1991- Group 1, Class A
IEC 1000-3-2:1995 / EN 61000-3-2: 1995
IEC 1000-3-2:1995 / EN 61000-3-3: 1994
EN 50082-1:1992
IEC 801-2:1991 4kV CD, 8kV AD
IEC 801-3:1984 3V/m
Supplementary Information:
This product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC and
carries the CE-marking accordingly.
Spokane, Washington USA
November 20,1998
Vince Roland
Reliability & Regulatory
Engineer
European Contact: Your local Agilent Technologies and Service Office or Agilent Technologies GmbH
Department ZQ/Standards Europe, Herrenberger Strasse 130, D-71034 Böblinger, Germany (FAX+49-7031-14-3143)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Agilen t Tech n ologies Wa r r a n ty Sta tem en t for
Com m er cia l P r od u ct s
Agilent Technologies 8935 Series E6380A CDMA Cellular/PCS Base Station Test Set
Duration of
Warranty: 1 Year
1. Agilent Technologies warrants Agilent hardware, accessories and
supplies against defects in materials and workmanship for the
period specified above. If Agilent Technologies receives notice of such
defects during the warranty period, Agilent Technologies will, at its
option, either repair or replace products which prove to be defective.
Replacement products may be either new or like-new.
2. Agilent Technologies warrants that Agilent software will not fail to
execute its programming instructions, for the period specified above,
due to defects in material and workmanship when properly installed
and used. If Agilent Technologies receives notice of such defects
during the warranty period, Agilent will replace software media
which does not execute its programming instructions due to such
defects.
3. Agilent Technologies does not warrant that the operation of Agilent
products will be uninterrupted or error free. If Agilent Technologies
is unable, within a reasonable time, to repair or replace any product
to a condition as warranted, customer will be entitled to a refund of
the purchase price upon prompt return of the product.
4. Agilent Technologies products may contain remanufactured parts
equivalent to new in performance or may have been subject to
incidental use.
5. The warranty period begins on the date of delivery or on the date of
installation if installed by Agilent Technologies. If customer
schedules or delays Agilent installation more than 30 days after
delivery, warranty begins on the 31st day from delivery.
6. Warranty does not apply to defects resulting from (a) improper or
inadequate maintenance or calibration, (b) software, interfacing,
parts or supplies not supplied by Agilent Technologies, (c)
unauthorized modification or misuse, (d) operation outside of the
published environmental specifications for the product, or (e)
improper site preparation or maintenance.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE
WARRANTIES ARE EXCLUSIVE AND NO OTHER
WARRANTYOR CONDITION, WHETHER WRITTEN OR ORAL IS
EXPRESSED OR IMPLIED AND AGILENT TECHNOLOGIES
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR
CONDITIONS OR MERCHANTABILITY, SATISFACTORY
QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
8. Agilent Technologies will be liable for damage to tangible property
per incident up to the greater of $300,000 or the actual amount paid
for the product that is the subject of the claim, and for damages for
bodily injury or death, to the extent that all such damages are
determined by a court of competent jurisdiction to have been directly
caused by a defective Agilent Technologies product.
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES
IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOLE
AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE,
IN NO EVENT WILL AGILENT TECHNOLOGIES OR ITS
SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT,
SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST
PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW
ZEALAND: THE WARRANTY TERMS CONTAINED IN THIS
STATEMENT, EXCEPT TO THE EXTENT LAWFULLY
PERMITTED, DO NOT EXCLUDE RESTRICT OR MODIFY AND
ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS
APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Assist a n ce
Maintenance
Agreements
Product maintenance agreements and other customer assistance
agreements are available for Agilent Technologies products. For any
assistance, contact your nearest Agilent Technologies Sales and Service
Office.
Regional Sales
and Service
Offices
Ta b le 1
R egion a l Sa les a n d Ser vice Offices
United States of America:
Agilent Technologies
Test and Measurement Call
Center
P.O. Box 4026
Englewood, CO 80155-4026
Canada:
Agilent Technologies Canada
Inc.
5150 Spectrum Way
Mississauga, Ontario
L4W 5G1
Europe:
Agilent Technologies
European Marketing
Organization
P.O. Box 999
1180 AZ Amstelveen
The Netherlands
(tel) 1 800 452 4844
(tel) 1 877 894 4414
(tel) (3120) 547 9999
J apan:
Latin America:
Australia/New Zealand:
Agilent Technologies
Australia Pty Ltd.
347 Burwood Highway
Forest Hill, Victoria 3131
Agilent Technologies J apan
Ltd.
Measurement Assistance
Center
9-1 Takakura-Cho,
Hachioji-Shi,
Tokyo 192-8510, J apan
Agilent Technologies
Latin America Region
Headquarters
5200 Blue Lagoon Drive,
Suite #950
Miami, Florida 33126
U.S. A.
(tel) 1 800 629 485
(Australia)
(fax) (61 3) 9272 0749
(tel) 0 800 738 378
(New Zealand)
(tel) (81) 456-56-7832
(fax) (81) 426-56-7840
(tel) (305) 267 4245
(fax) (305) 267 4286
(fax) (64 4) 802 6881
Asia Pacific:
Agilent Technologies
24/F, Cityplaza One,
111 Kings Road,
Taikoo Shing, Hong Kong
(tel) (852) 3197 7777
(fax) (852) 2506 9233
39
Download from Www.Somanuals.com. All Manuals Search And Download.
P ow er Ca bles
Ta ble 2
P ow er Ca bles
P lu g Typ e
P lu g Descr ip t ion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le Descr ip tion s
St r a igh t/St r a igh t
St r a igh t/90°
8120-1689
8120-1692
79 in ch es, m in t gr a y
79 in ch es, m in t gr a y
Earth Ground
Line
Neutral
Used in the following locations
Afghanistan, Albania, Algeria, Angola, Armenia, Austria, Azerbaijan, Azores
Bangladesh, Belgium, Benin, Bolivia, Boznia-Herzegovina, Bulgaria, Burkina Faso,
Burma, Burundi, Byelarus
Cameroon, Canary Islands, Central AfricanRepublic, Chad, Chile, Comoros, Congo,
Croatia, Czech Republic, Czechoslovakia
Denmark, Djibouti
East Germany, Egypt, Estonia, Ethiopia
Finland, France, French Guiana, French Indian Ocean Areas
Gabon, Gaza Strip, Georgia, Germany, Gozo, Greece
Hungary
Iceland, Indonesia, Iran, Iraq, Israel, Italy, Ivory Coast
J ordan
Kazakhstan, Korea, Kyrgystan
Latvia, Lebanon, Libya, Lithuania, Luxembourg
Macedonia, Madeira Islands, Malagasy Republic, Mali, Malta, Mauritania, Miquelon,
Moldova, Mongolia, Morocco, Mozambique
Nepal, Netherlands, Netherlands Antilles, Niger, Norway
Oman
Pakistan, Paraguay, Poland, Portugal
Rep. South Africa, Romania, Russia, Rwanda
Saudi Arabia (220V), Senegal, Slovak Republic, Slovenia, Somalia, Spain, Spanish
Africa, Sri Lanka, St.Pierce Islands
Sweden, Syria
Tajikistan, Thailand, Togo, Tunisia, Turkey, Turkmenistan
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble 2
P ow er Ca bles
P lu g Typ e
P lu g Descr ip t ion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le Descr ip tion s
St r a igh t/St r a igh t
St r a igh t/90°
8120-1689
8120-1692
79 in ch es, m in t gr a y
79 in ch es, m in t gr a y
Earth Ground
Line
Neutral
USSR, Ukraine, Uzbekistan
Western Africa, Western Sahara
Yugoslavia
Zaire
Ta ble 3
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip tion s
m a le/fem a le
Agilen t P a r t
#
(ca b le & p lu g)
Ca b le Descr ip t ion s
Straight/Straight
8120-0698
90 inches, black
Earth Ground
Line
Line
Used in the following locations
Peru
Ta ble 4
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip tion s
m a le/fem a le
Agilen t P a r t # Ca b le Descr ip tion s
(ca b le & p lu g)
Straight/Straight
Straight/90°
8120-2104
8120-2296
79 inches, gray
79 inches, gray
Line
Neutral
Earth Ground
Used in the following locations
Switzerland
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble 5
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip t ion s
m a le/fem a le
Agilen t P a r t
#
(ca b le &
p lu g)
Ca b le Descr ip tion s
Straight/Straight
Straight/90
Straight/Straight
8120-1378
8120-1521
8120-1751
90 inches, jade gray
90 inches, jade gray
90 inches, jade gray
125V
Earth Ground
Neutral
Line
Used in the following locations
American Samoa
Bahamas, Barbados, Belize, Bermuda, Brazil,
Caicos, Cambodia, Canada, Cayman Islands, Columbia, Costa Rica, Cuba
Dominican Republic
Ecuador, El Salvador
French West Indies
Guam, Guatemala, Guyana
Haiti, Honduras
J amaica
Korea
Laos, Leeward and Windward Is., Liberia
Mexico, Midway Islands
Nicaragua
Other Pacific Islands
Panama, Philippines, Puerto Rico
Saudi Arabia (115V,127V), Suriname
Taiwan, Tobago, Trinidad, Trust Territories of Pacific Islands
Turks Island
United States
Venezuela, Vietnam, Virgin Islands of the US
Wake Island
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble 6
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip tion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le
Descr ip tion s
Straight/Straight
Straight/90°
8120-4753
8120-4754
90 inches, dark gray
90 inches, dark gray
J IS C 8303, 100 V
Earth Ground
Neutral
Line
Used in the following locations
J apan
Ta ble 7
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip t ion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le
Descr ip tion s
90° /STRAIGHT
8120-2956
8120-2957
8120-3997
79 inches, gray
79 inches, gray
79 inches, gray
90°/90°
Straight/Straight
Earth Groun
Neutral
Line
Used in the following locations
Denmark
Greenland
Ta ble 8
P ow er Ca bles
P lu g Descr ip t ion s Agilen t P a r t #
P lu g Typ e
Ca b le Descr ip tion s
m a le/fem a le
(ca b le & p lu g)
Straight/Straight
Straight/90°
8120-4211
8120-4600
79 inches, mint gray
79 inches, mint gray
Earth Ground
Line
Neutral
Used in the following locations
Botswana
India
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble 8
P ow er Ca bles
P lu g Descr ip t ion s Agilen t P a r t #
P lu g Typ e
Ca b le Descr ip tion s
m a le/fem a le
(ca b le & p lu g)
Lesotho
Malawi
South-West Africa (Namibia), Swaziland
Zambia, Zimbabwe
Ta ble 9
P ow er Ca bles
P lu g Typ e (Ma le)
P lu g
Descr ip tion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le Descr ip tion s
90°/Straight
90°/90°
8120-1351
8120-1703
90 inches, mint gray
90 inches, mint gray
Earth Ground
Line
Neutral
Used in the following locations
Bahrain, British Indian Ocean Terr., Brunei
Canton, Cyprus
Enderbury Island, Equatorial Guinea
Falkland Islands, French Pacific Islands
Gambia, Ghana, Gibraltar, Guinea
Hong Kong
Ireland
Kenya, Kuwait
Macao, Malaysia, Mauritius
Nigeria
Qatar
Seychelles, Sierra Leone, Singapore, Southern Asia, Southern Pacific Islands, St. Helena,
Sudan
Tanzania
Uganda, United Arab Emirates, United Kingdom
Yeman (Aden & Sana)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta ble 10
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip t ion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le
Descr ip tion s
Straight/Straight
Straight/90°
8120-1369
8120-0696
79 inches, gray
80 inches, gray
Earth Ground
Neutral
Line
Used in the following locations
Argentina, Australia
China (People’s Republic)
New Zealand
Papua New Guinea
Uruguay
Western Samoa
Ta ble 11
P ow er Ca bles
P lu g Typ e
P lu g
Descr ip tion s
m a le/fem a le
Agilen t P a r t #
(ca b le & p lu g)
Ca b le Descr ip t ion s
Straight/Straight
Straight/Straight
Straight/90°
8120-1860
8120-1575
8120-2191
8120-4379
60 inches, jade gray
30 inches, jade gray
60 inches, jade gray
15.5 inches, jade gray
Earth Ground
Line
Neutral
Straight/90°
Used in the following locations
System Cabinets
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Atten tion
ATTENTION
Static Sensitive
Devices
This instrument was constructed in an ESD (electro-static discharge) protected
environment. This is because most of the semiconductor devices used in this
instrument are susceptible to damage by static discharge.
Depending on the magnitude of the charge, device substrates can be punctured
or destroyed by contact or mere proximity of a static charge. The result can
cause degradation of device performance, early failure, or immediate
destruction.
These charges are generated in numerous ways such as simple contact,
separation of materials, and normal motions of persons working with static
sensitive devices.
When handling or servicing equipment containing static sensitive devices,
adequate precautions must be taken to prevent device damage or destruction.
Only those who are thoroughly familiar with industry accepted techniques for
handling static sensitive devices should attempt to service circuitry with these
devices.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ven tion s Used in Th is Ma n u a l
The following conventions are used throughout this manual to help
clarify instructions and reduce unnecessary text:
•
“Test Set” refers to the Agilent Technologies 8935 CDMA
Cellular/PCS Base Station Test Set.
•
•
Test Set keys are indicated like this: Preset
Test Set screen information, such as a measurement result or an
error message, is shown like this: TX Channel Power -1.3 dBm
NOTE
HP-IB and GPIB are one and the same.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Tr a d em a r k Ack n ow led gm en ts
Hewlett-Packard and HP are registered trademarks of
Hewlett-Packard Company.
Microsoft‚ Windows , and MS-DOS ‚ are registered trademarks of
Microsoft Corporation.
ProComm‚ is a registered trademark of DataStorm Technologies, Inc.
HyperTerminal is a registered trademark of Hilgraeve, Incorporated.
Pentium is a registered trademark of Intel Corporation.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Wh ich Docu m en ts a r e Requ ir ed
The following documents are part of the Test Set’s document set. Use
the table to help you decide which document you need.
Ta b le 12
Docu m en t Na viga t ion
Docu m en t
P a r t Nu m ber
Usa ge
CDMA Application
Guide
E6380-90016
Use this manual for basic CDMA
measurements and for getting started with
the Test Set.
AMPS Application
Guide
E6380-90017
E6380-90019
Use this manual for making AMPS base
station measurements.
Reference Guide
Use this manual for screen and field
descriptions and general operation
information about the Test Set.
Programmer ’s Guide
E6380-90018
E6380-90015
5966-0512E
Use this manual to learn HP-IB syntax and for
learning how to program the Test Set.
Assembly Level Repair
Guide (this manual)
Use this manual to perform calibration on the
Test Set and for general service information.
Technical
Test Set’s specifications data sheet
Specifications
Publication
CDROM
E6380-90027
Includes all of the above documents.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Notice
Not ice
Permission to use, copy, and distribute this template is hereby granted,
provided that the above copyright notice appears in all copies and that
both that copyright notice and this permission notice appear in
supporting hardcopy and online documentation. All other rights
reserved.
The name of Agilent Technologies, Inc. or the Agilent Technologies logo
may not be used in advertising or publicity pertaining to distribution of
this template without specific, written prior permission. Agilent
Technologies makes no representations about the suitability of this
template for any purpose. It is provided “as is” without expressed or
implied warranty.
Agilent Technologies disclaims all warranties with regard to this
template, including all implied warranties of merchantability and
fitness. In no event shall Agilent Technologies, Inc. be liable for any
special, indirect or consequential damages or any damages whatsoever
resulting from loss of use, data or profits, whether in an action of
contract, negligence or other tortious action, arising out of or in
connection with the use or performance of this template.
52
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Using This Dictionary
Usin g Th is Diction a r y
This dictionary is arranged according to GPIB subsystem. Each
subsystem contains syntax for a specific set of functions within the Test
Set.
NOTE
For all intents and purposes, GPIB and HP-IB may be considered one
and the same protocol throughout this manual.
When using the electronic form of this guide, you can cut-and-paste the
syntax into your programming code. It is set up especially for this
purpose, and where possible, the syntax includes the limits or expected
values for the command.
Descr ip tion of Com m a n d s
The typical format of each entry is as follows:
root:branch1:branch2:branch3:command parameter !limits
root:branch1:branch2:branch3:command ‘argument’
E q u iva len t Com m a n d s
Commands separated by a vertical bar | are equivalent. For example,
for the command AFG2| ENCoder:AMPS:BUSY ‘Idle’, either
AFG2:AMPS:BUSY ‘Idle’
or
ENC:AMPS:BUSY ‘Idle’
will set the AMPS encoder to the idle state.
Op t ion a l Com m a n d s
Commands enclosed in square brackets [ ] are optional. For example,
for the command AFG2| ENC:NAMP| NTAC[:FOCC]:AM 30 either
AFG2:NAMP:FOCC:AM 30
or
AFG2:NAMP:AM 30
will set the NAMPS encoder ’s data level on the forward control channel
to AM. (Other combinations are possible with the above command.)
Chapter 1
53
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
AFANa lyzer su bsystem
:AIN <str in g>
:AIN?
These commands set/query the input state of the AUDIO IN LO
connector.
Syn t a x
AFAN:AIN ‘Gnd’
‘Float’
‘600 to Hi’
AFAN:AIN?
Scr een /field eq u iva len t
AFAN:AIN sets the Audio In Lofield on the AF ANALYZER screen.
:DEMP h a sis <str in g>
:DEMP h a sis?
These commands set/query the state of the de-emphasis networks in
the audio analyzer and speaker circuitry.
Syn t a x
AFAN:DEMP ‘750 us’
‘Off’
AFAN:DEMP?
Scr een /field eq u iva len t
AFAN:DEMP sets the De-Emphasisfield on the AF ANALYZER screen.
54
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:DEMP h a sis:GAIN <str in g>
:DEMP h a sis:GAIN?
These commands set/query the AF analyzer ’s amplifier gain. This
command is only effective when autoranging is turned off using the
AFAN:RANG ‘Hold’ command.
Gain is automatically set when the AFAN:RANG ‘Auto’ command is
used. If autoranging is enabled (AFAN:RANG ‘Auto’) and you attempt
to change the gain setting by sending the AFAN:DEMP:GAIN
command, the value you send will be overridden by the autoranging
function.
Syn t a x
AFAN:DEMP:GAIN ‘0 dB’
‘10 dB’
‘20 dB’
‘30 dB’
AFAN:DEMP:GAIN?
Scr een /field eq u iva len t
AFAN:DEMP:GAIN sets the De-Emp Gainfield on the AF ANALYZER
screen when the Gain Cntlfield is set to Hold.
Chapter 1
55
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:DETector <str in g>
:DETector ?
These commands set/query the type of detector used for AF signals.
Syn t a x
AFAN:DET ‘RMS’
'RMS*SQRT2'
'PK+'
'PK-'
'PK+-/2'
'PK+-MAX'
'PK+ HOLD'
'PK- HOLD'
'PK+-/2 Hd'
'PK+-MX Hd'
AFAN:DET?
Scr een /field eq u iva len t
AFAN:DET controls the Detectorfield on the AF ANALYZER screen.
:DETector :P KLoca tion <str in g>
:DETector :P KLoca tion ?
These commands set/query the signal source for the peak detector
measurements.
Syn t a x
AFAN:DET:PKL ‘Filters’
‘De-Emp’
AFAN:DET:PKL?
Scr een /field eq u iva len t
AFAN:DET:PKL controls the Pk Det Tofield on the AF ANALYZER
screen.
56
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:DETector :SETTlin g <str in g>
:DETector :SETTlin g?
These commands set/query the settling time for audio measurements.
(Use Fast when measuring signals greater than 200 Hz).
Syn t a x
AFAN:DET:SETT ‘Fast’
‘Slow’
AFAN:DET:SETT?
Scr een /field eq u iva len t
AFAN:DET SETT controls the Settlingfield on the AF ANALYZER
screen.
:ELResistor <r ea l n u m ber >
:ELResistor ?
These commands set/query the external load resistance for
measurements using the AUDIO IN HI and LO connectors.
but does not use the :STATe command.
Syn t a x
AFAN:ELR <real number> !valid from 1 ohm to 1 megohm
AFAN:ELR? !returns the value in ohms
Scr een /field eq u iva len t
AFAN:ELR controls the Ext Load Rfield on the AF ANALYZER screen.
Chapter 1
57
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:F ILT1| F ILTER1 <str in g>
:F ILT1?| F ILTER1?
These commands set/query the audio filter 1 selection.
Syn t a x
AFAN:FILT1 ‘20Hz HPF’
‘50HZ HPF’
‘300Hz HPF’
‘C MESSAGE’
AFAN:FILT1?
Scr een /field eq u iva len t
AFAN:FILT1 controls the Filter 1field on the AF ANALYZER screen
:F ILT2| F ILTER2 <str in g>
:F ILT2?| F ILTER2?
These commands set/query the audio filter 2 selection.
Syn t a x
AFAN:FILT2 ‘300Hz LPF’
‘3kHz LPF’
‘15kHz LPF’
‘>99kHz LP’
‘6kHz BPF’
AFAN:FILT2?
Scr een /field eq u iva len t
AFAN:FILT2 controls the Filter 2field on the AF ANALYZER screen.
58
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:GTIMe <r ea l n u m ber >
:GTIMe?
This command sets the gate time (how long the AF counter samples the
input signal) for the audio frequency counter.
but does not use the :STATe command.
Syn t a x
AFAN:GTIM <real number> !valid from 10 milliseconds to 1
second
AFAN:GTIM?
Scr een /field eq u iva len t
AFAN:GTIM controls the AF Cnt Gatefield on the AF ANALYZER
screen.
:INP u t <str in g>
:INP u t?
These commands set/query the input to the audio analyzer.
Syn t a x
AFAN:INP ‘FM Demod’
‘AM Demod’
‘SSB Demod’
‘Audio In’
‘Ext Mod’
‘FM Mod’
‘AM Mod’
‘Audio Out’
AFAN:INP?
Scr een /field eq u iva len t
AFAN:INP controls the AF Anl Infield on the AF ANALYZER screen.
Chapter 1
59
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:INP u t:GAIN <str in g>
:INP u t:GAIN?
These commands set/query the input gain setting for the audio
analyzer. This command is only effective when autoranging is turned
off using the AFAN:RANG ‘Hold’ command.
Gain is automatically set when the AFAN:RANG ‘Auto’ command is
used. If autoranging is enabled (AFAN:RANG ‘Auto’) and you attempt
to change the gain setting by sending the AFAN:INP:GAIN command,
the value you send will be overridden by the autoranging function.
Syn t a x
AFAN:INP:GAIN ‘0 dB’
‘20 dB’
‘40 dB’
AFAN:INP:GAIN?
Scr een /field eq u iva len t
AFAN:INP:GAIN controls the Input Gainfield on the AF ANALYZER
screen when the Gain Cntlfield is set to Hold.
60
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:NOTCh :GAIN <str in g>
:NOTCh :GAIN?
These commands set/query the gain of the AF analyzer ’s notch filter
amplifier. This command is only effective when autoranging is turned
off using the AFAN:RANG ‘Hold’ command.
Gain is automatically set when the AFAN:RANG ‘Auto’ command is
used. If autoranging is enabled (AFAN:RANG ‘Auto’) and you attempt
to change the gain setting by sending the AFAN:NOTC:GAIN
command, the value you send will be overridden by the autoranging
function.
Syn t a x
AFAN:NOTC:GAIN ‘0 dB’
‘10 dB’
‘20 dB’
‘30 dB’
‘40 dB’
AFAN:NOTC:GAIN?
Scr een /field eq u iva len t
AFAN:NOTC:GAIN controls the Notch Gainfield on the AF
ANALYZER screen when the Gain Cntlfield is set to Hold.
:NOTCh :F REQu en cy <r ea l n u m ber >
:NOTCh :F REQu en cy?
These commands set/query the center frequency for the variable
Syn t a x
AFAN:NOTC:FREQ <real number> !valid 330 Hz to 10 kHz
AFAN:NOTC:FREQ?
Scr een /field eq u iva len t
AFAN:NOTC:FREQ controls the Notch Freqfield on the AF
ANALYZER screen.
Chapter 1
61
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:RANGin g <str in g>
:RANGin g?
These commands set/query the gain control mode of the AF analyzer.
Syn t a x
AFAN:RANG ‘Auto’
‘Hold’
AFAN:RANG?
Scr een /field eq u iva len t
AFAN:RANG controls the Gain Cntlfield on the AF ANALYZER
screen.
:SMP oin t <st r in g>
:SMP oin t?
These commands set/query the signal source for the oscilloscope.
Syn t a x
AFAN:SMP ‘De-Emp’
‘Filters’
‘Input’
‘Notch’
AFAN:SMP?
Scr een /field eq u iva len t
AFAN:SMP controls the Scope Tofield on the AF ANALYZER screen.
62
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFANalyzer subsystem
:SP Ea k er :MODE <str in g>
:SP Ea k er :MODE ?
These commands set/query the automatic level control (ALC) function
for the instrument’s internal speaker.
Syn t a x
AFAN:SPE:MODE ‘On’
‘Off’
AFAN:SPE:MODE?
Scr een /field eq u iva len t
AFAN:SPE:MODE controls the Speaker ALCfield on the AF
ANALYZER screen.
:SP Ea k er :VOLu m e <str in g>
:SP Ea k er :VOLu m e?
These commands set/query the speaker volume, which is controlled by
the Volume knob when ‘Pot’ is selected.
Syn t a x
AFAN:SPE:VOL ‘Pot’
‘Off’
AFAN:SPE:VOL?
Scr een /field eq u iva len t
AFAN:SPE:VOL controls the Speaker Volfield on the AF ANALYZER
screen.
Chapter 1
63
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG1|AFGENERATOR1 subsystem
AF G1| AF GENERATOR1 su bsystem
:AM <r ea l n u m ber >
:AM?
This command sets AM modulation depth when the AFG1:DEST ‘AM’
is used first.
Syn t a x
AFG1:AM <real number>
AFG1:AM? !returns the value of the amplitude modulation
Scr een /field eq u iva len t
AFG1:AM controls the AFGen1 Tofield (lower subfield) on the RF
GENERATOR screen.
:DESTin a tion <str in g>
:DESTin a tion ?
AFG1:DEST sets/queries the destination of AF generator 1’s signal.
Syn t a x
AFG1:DEST ‘AM’
‘FM’
‘Audio Out’
AFG1:DEST?
Scr een /field eq u iva len t
AFG1:DEST controls the AFGen1 Tofield (upper subfield) on the RF
GENERATOR screen.
64
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG1|AFGENERATOR1 subsystem
:F M <r ea l n u m ber >
:F M?
This command sets FM modulation deviation when the AFG1:DEST
‘FM’ command is used.
Syn t a x
AFG1:FM <real number>
AFG1:FM?
Scr een /field eq u iva len t
AFG1:FM controls the AFGen1 Tofield (lower subfield) on the RF
GENERATOR screen.
:F REQu en cy <r ea l n u m ber >
:F REQu en cy?
This command set the frequency of audio frequency generator 1.
not including the :STATe command.
Syn t a x
AFG1:FREQ <real number>
AFG1:FREQ?
Scr een /field eq u iva len t
AFG1:FREQ controls the AFGen1 Freqfield on the RF GENERATOR
screen.
Chapter 1
65
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG1|AFGENERATOR1 subsystem
:OUTP u t <r ea l n u m ber >
:OUTP u t?
This command sets the amplitude of the audio signal (volts rms) at the
AUDIO OUT connector if the AFG1:DEST is ‘Audio Out’.
Syn t a x
AFG1:OUTP <real number>
AFG1:OUTP?
Scr een /field eq u iva len t
AFG1:OUTP controls the AFGen1 Tofield (lower subfield) on the RF
GENERATOR screen.
66
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
AF G2| ENCod er su bsystem
:AM <r ea l n u m ber >
:AM?
This command sets AM modulation depth if the command AFG2:DEST
‘AM’ is used first.
Syn t a x
AFG2:AM <real number>
AFG2:AM? !returns the value of the amplitude modulation
Scr een /field eq u iva len t
AFG2:AM controls the AFGen2 Tofield (lower subfield) on the RF
GENERATOR screen when the upper subfield is set to AM.
:BURSt <in t eger >
:BURSt?
These commands set/query the number of times the message data is
output. To use this function, the AFG2:SEND:MODE command must
specify ‘Burst’ first.
Syn t a x
AFG2:BURS <integer>
AFG2:BURS?
Scr een /field eq u iva len t
AFG2:BURS controls the Burstsfield on the SIGNALING ENCODER
screen when the Modefield is set to DTMF, AMPS-TACS, or NAMP-NTAC.
Chapter 1
67
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:DESTin a tion <str in g>
:DESTin a tion ?
:DEST sets/queries the destination of the AF generator 2’s signal.
Syn t a x
AFG2:DEST ‘AM’
‘FM’
‘Audio Out’
AFG2:DEST?
Scr een /field eq u iva len t
AFG2:DEST controls the AFGen2 Tofield (upper subfield) on the RF
GENERATOR screen.
68
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:F ILTer <st r in g>
:F ILTer ?
To improve performance, one of four premodulation filters is
automatically selected for each encoder mode. The automatically
selected filter can be changed only by using GPIB commands.
We recommend that you leave this setting at its automatically selected
setting.
If it is necessary to override the automatic settings, the
AFG2:FILT:MODE ‘ON’ command must be executed first (filter mode
OFF is the power up default state.) The following error will occur if the
user attempts to select an alternate filter without first setting the filter
mode to ON: Entry not accepted.The syntax to change or query the
premodulation filter is shown in the example below.
Syn t a x
AFG2:FILT ‘None’
‘20 kHzLPF’
‘250 HzLPF’
‘150 HzLPF’
AFG2:FILT?
E xa m p le
AFG2:FILT:MODE 'ON' !turn filter selection mode on
AFG2:FILT:MODE? !query the current mode setting
AFG2:FILT 'NONE|20kHz LPF|250Hz LPF|150Hz LPF'
!select one to change the setting
AFG2:FILT? !query the new filter setting
Scr een /field eq u iva len t
AFG2:FILT has no screen/field equivalent.
Chapter 1
69
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:F ILTer :MODE <str in g>
:F ILTer :MODE?
These commands set/query the premodulation filter ’s control.
We recommend that you leave this setting at its default setting (filter
mode OFF is the power up default state.) See the :FILTer command on
Syn t a x
AFG2:FILT:MODE ‘ON’
‘OFF’
AFG2:FILT:MODE?
Scr een /field eq u iva len t
AFG2:FILT:MODE has no screen/field equivalent.
:F M <r ea l n u m ber >
:F M?
This command sets FM modulation deviation if the AFG2:DEST is ‘FM’.
Syn t a x
AFG2:FM <real number>
AFG2:FM?
Scr een /field eq u iva len t
AFG2:FM controls the AFGen2 Tofield (lower subfield) on the RF
GENERATOR screen when the upper subfield is set to FM.
70
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:F REQu en cy <r ea l n u m ber >
:F REQu en cy?
This command set/queries the output frequency of AF generator 2.
but does not use the :STATe command.
Syn t a x
AFG2:FREQ <real number>
AFG2:FREQ?
Scr een /field eq u iva len t
AFG2:FREQ controls the AFGen2 Freqfield on the RF GENERATOR
screen.
:MODE <str in g>
:MODE?
This command sets the type of signaling encoder.
Syn t a x
AFG2:MODE ‘Func Gen’
‘DTMF’
‘AMPS-TACS’
‘NAMP-NTAC’
AFG2:MODE?
Scr een /field eq u iva len t
AFG2:MODE controls the Modefield on the SIGNALING ENCODER
screen.
Chapter 1
71
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:OUTP u t <r ea l n u m ber >
:OUTP u t?
This command sets the amplitude of the audio signal (volts rms) at the
AUDIO OUT connector if the AFG2:DEST is ‘Audio Out’.
Syn t a x
AFG2:OUTP <real number>
AFG2:OUTP?
Scr een /field eq u iva len t
AFG2:OUT controls the AFGen2 Tofield (lower subfield) on the RF
GENERATOR screen when the upper subfield is set to Audio Out.
:P EMP h a sis <str in g>
:P EMP h a sis?
This command sets pre-emphasis filters for the DTMF encoder.
Syn t a x
AFG2:PEMP ‘On’
‘Off’
AFG2:PEMP?
Scr een /field eq u iva len t
AFG2:PEMP controls the Pre-Empfield on the SIGNALING ENCODER
screen when the Modefield is set to DTMF.
72
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:P OLa r ity <str in g>
:P OLa r ity?
This command causes the digitally modulated signals to be sent with a
normal or inverted response to the digital data. When Inverted, a
digital 1 produces a frequency shift in an FM carrier opposite to normal
operation.
Syn t a x
AFG2:POL ‘Norm’
‘Invert’
AFG2:POL?
Scr een /field eq u iva len t
AFG2:POL controls the Polarityfield on the SIGNALING ENCODER
screen when the Modefield is set to AMPS-TACSor NAMP-NTAC.
:SEND:MODE <str in g>
:SEND:MODE?
These commands set/query the mode used when a message is sent.
•
‘Single’ outputs the entire message once.
•
•
•
‘Burst’ outputs the message the number of times specified by the
AFG2:BURS command.
‘Cont’ outputs the message continuously until the AFG2:STOP
command is sent.
‘Step’ outputs a single step in an encoder sequence each time the
AFG2:SEND command is sent. After the entire sequence is output,
the encoder returns to the first character in the sequence.
Syn t a x
AFG2:SEND:MODE ‘Single’
‘Burst’
‘Cont’
‘Step’
AFG2:SEND:MODE?
Scr een /field eq u iva len t
AFG2:SEND:MODE controls then Send Modefield on the SIGNALING
ENCODER screen when the Modefield is set to AMPS-TACS, NAMP-NTAC,
or DTMF.
Chapter 1
73
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:SEND
This command sends the encoder data stream.
Syn t a x
AFG2:SEND
Scr een /field eq u iva len t
AFG2:SEND controls the Sendfield on the SIGNALING ENCODER
screen when the Modefield is set to AMPS-TACS, NAMP-NTAC, or DTMF.
:STOP
This command stops the data stream that is being output when
AFG2:SEND:MODE is ‘Cont’ or ‘Burst’.
Syn t a x
AFG2:STOP
Scr een /field eq u iva len t
AFG2:STOP controls the Stopfield on the SIGNALING ENCODER
screen when the Modefield is set to AMPS-TACS, NAMP-NTAC, or DTMF.
74
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:BUSY <str in g>
:AMP S| TACS:BUSY?
These commands set/query the busy/idle status information included in
the signaling sequence.
•
•
•
‘Idle’ sets the busy/idle bits of the forward control channel
information to indicate an idle state.
‘Busy’ sets the busy/idle bits of the forward control channel
information to indicate an busy state.
‘WS Delay’ (word sync delay) prevents a busy/idle change until the
word sync information has been received and a defined number of
delay bits has been counted. The delay is set with the
AFG2:AMPS:BUSY:DEL command.
•
‘1stBitDly’ (first bit delay) causes the busy/idle bit to be set after a
bit has been received and a defined number of delay bits has been
counted. The delay is set with the AFG2:AMPS:BUSY:DEL
command.
This command requires that the AFG2:AMPS:CHAN command
specifies ‘Cntl’.
Syn t a x
AFG2:AMPS:BUSY ‘Idle’
‘Busy’
‘WS Delay
‘1stBitDly’
AFG2:AMPS:BUSY?
Scr een /field eq u iva len t
AFG2:AMPS:BUSY controls the Busy/Idlefield on the SIGNALING
ENCODER screen when the Modefield is set to AMPS-TACSand the
Channelfield is set to Cntl.
Chapter 1
75
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:BUSY:DELa y <in teger >
These commands set/query the number of bits that are counted before a
busy/idle bit changes from the idle state to the busy state. This function
is used in conjunction with the WS Delay and 1stBitDly settings of the
AFG2:AMPS| TACS:BUSY command. This command also requires that
the AFG2:AMPS:CHAN command is specifies ‘Cntl’.
Syn t a x
AFG2:AMPS:BUSY:DEL <real number>
Scr een /field eq u iva len t
AFG2:AMPS:BUSY:DEL controls the B/I Delayfield on the
SIGNALING ENCODER screen when the Modefield is set to
AMPS-TACS and the Channel field is set to Cntl.
:AMP S| TACS:CHANn el <str in g>
:AMP S| TACS:CHANn el?
These commands set/query the channel type. ‘Cntl’ selects the forward
control channel (FOCC). ‘Voice’ selects the forward voice channel (FVC).
Syn t a x
AFG2:AMPS:CHAN ‘Cntl’
‘Voice’
AFG2:AMPS:CHAN?
Scr een /field eq u iva len t
AFG2:AMPS:CHAN controls the Channelfield on the SIGNALING
ENCODER screen when the Modefield is set to AMPS-TACS.
76
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:DATA:AM <r ea l n u m b er >
:AMP S| TACS:DATA:AM?
These commands set/query the data level when the AFG2:DEST ‘AM’
command is used first. The data level units are %.
Syn t a x
AFG2:AMPS:DATA:AM
AFG2:AMPS:DATA:AM?
Scr een /field eq u iva len t
AFG2:AMPS:DATA:AM controls the Data Levelfield when AFGen2 To
field is set to AMon the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACS.
:AMP S| TACS:DATA:F M <r ea l n u m b er >
:AMP S| TACS:DATA:F M?
These commands set/query the data level when the AFG2:DEST ‘FM’
command is used. The data level units are kHz.
Syn t a x
AFG2:AMPS:DATA:FM
AFG2:AMPS:DATA:FM?
Scr een /field eq u iva len t
AFG2:AMPS:DATA:FM controls the Data Levelfield when AFGen2 To
field is set to FMon the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACS.
Chapter 1
77
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:DATA:LEVel <r ea l n u m ber >
:AMP S| TACS:DATA:LEVel?
These commands set/query the data level when the AFG2:DEST ‘Audio
Out’ command is used first. The data level units are mV.
Syn t a x
AFG2:AMPS:DATA:LEV
AFG2:AMPS:DATA:LEV?
Scr een /field eq u iva len t
AFG2:AMPS:DATA:LEV controls the Data Levelfield when AFGen2
Tofield is set to Audio Outon the SIGNALING ENCODER screen
when the Modefield is set to AMPS-TACS.
:AMP S| TACS:DATA:RATE <r ea l n u m ber >
These commands set/query the data rate of the encoded message.
but does not use the :STATe command.
Syn t a x
AFG2:AMPS:DATA:RATE
Scr een /field eq u iva len t
AFG2:AMPS:DATA:RATE controls the Data Rate field on the
SIGNALING ENCODER screen when the Modefield is set to
AMPS-TACS.
78
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:F ILLer :DATA1 <str in g>
:AMP S| TACS:F ILLer :DATA2 <str in g>
:AMP S| TACS:F ILLer :DATA1?
:AMP S| TACS:F ILLer :DATA2?
These commands set/query FOCC filler data. Each filler contains 7
hexadecimal characters representing the 2 type bits and 26 information
bits of the control filler/message word. The control filler is sent
continuously when the :AMPS| TACS:FILL:SEND command is used or
after a control message has been sent using :AMPS| TACS:SEND.
Both filler fields must be full (seven digits) for the forward control
channel information to be structured correctly. Do not leave any blank
spaces.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:AMPS:FILL:DATA1 <string>
AFG2:AMPS:FILL:DATA2 <string>
AFG2:AMPS:FILL:DATA1?
AFG2:AMPS:FILL:DATA2?
Scr een /field eq u iva len t
AFG2:AMPS:FILL:DATA1 and DATA 2 control the Fillerfields for
Stream A and Stream B on the SIGNALING ENCODER screen when
the Modefield is set to AMPS-TACSand the Channelfield is set to Cntl.
:AMP S| TACS:F ILLer :SEND
This command sends the filler information that is entered with the
AFG2:FILL:DATA1 and AFG2:FILL:DATA2 commands.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:AMPS:FILL:SEND
Scr een /field eq u iva len t
AFG2:AMPS:FILL:SEND controls the Send Fillerfield on the
SIGNALING ENCODER screen when the Modefield is set to
AMPS-TACSand the Channelfield is set to Cntl.
Chapter 1
79
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:F ILLer :STOP
This command stops the output of filler data.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:AMPS:FILL:STOP
Scr een /field eq u iva len t
AFG2:AMPS:FILL:STOP controls the Stop Fillerfield on the
SIGNALING ENCODER screen when the Modefield is set to
AMPS-TACSand the Channelfield is set to Cntl.
:AMP S| TACS:F VCMessa ge <str in g>
:AMP S| TACS:F VCMessa ge?
These commands set/query the 7 hexadecimal characters representing
the 2 type bits and 26 information bits in the forward voice channel
(FVC) message word. All seven characters must be present (with no
blank spaces) for the message to be valid. The SAT is turned off while
the FVC message stream is sent.
This command is used with the AFG2:AMPS:CHAN ‘Voice’ command.
Syn t a x
AFG2:AMPS:FVCM <string>
AFG2:AMPS:FVCM?
Scr een /field eq u iva len t
AFG2:AMPS:FVCM controls the Messagefield on the SIGNALING
ENCODER screen when the Modefield is set to AMPS-TACSand the
Channelfield is set to Voice.
80
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:MESSa ge:DATA1 <st r in g>
:AMP S| TACS:MESSa ge:DATA2 <st r in g>
:AMP S| TACS:MESSa ge:DATA1?
:AMP S| TACS:MESSa ge:DATA2?
These commands set/query FOCC Stream A and Stream B message
data. Like the filler data, the message information can only be input in
full (seven digit) lines. Also, message streams A and B must have the
same number of lines in them.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:AMPS:MESS:DATA1 <string>
AFG2:AMPS:MESS:DATA2 <string>
AFG2:AMPS:MESS:DATA1?
AFG2:AMPS:MESS:DATA2?
Scr een /field eq u iva len t
AFG2:AMPS:MESS controls the Messagefields for FOCC Stream A
and Stream B on the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACS. These fields are displayed only when the
Channelfield is set to Cntl.
:AMP S| TACS:SAT:AM <r ea l n u m b er >
:AMP S| TACS:SAT:AM?
These commands set/query the SAT level when the AFG2:DEST ‘AM’
and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level
units are %.
Syn t a x
AFG2:AMPS:SAT:AM
AFG2:AMPS:SAT:AM?
Scr een /field eq u iva len t
AFG2:AMPS:SAT:AM controls the SAT Levelfield when AFGen2 To
field is set to AMon the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACSand the Channelfield is set to Voice.
Chapter 1
81
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:SAT:F M <r ea l n u m ber >
:AMP S| TACS:SAT:F M?
These commands set/query the SAT level when the AFG2:DEST ‘FM’
and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level’s
units are kHz.
Syn t a x
AFG2:AMPS:SAT:FM
AFG2:AMPS:SAT:FM?
Scr een /field eq u iva len t
AFG2:AMPS:SAT:FM controls the SAT Levelfield when AFGen2 To
field is set to FMon the SIGNALING ENCODER screen when the Mode
field is set to AMPS-TACS and the Channel field is set to Voice.
:AMP S| TACS:SAT:LEVel <r ea l n u m ber >
:AMP S| TACS:SAT:LEVel?
These commands set/query the SAT level when the AFG2:DEST ‘Audio
Out’ and AFG2:AMPS:CHAN ‘Voice’ commands are used. The SAT level
units are mV.
Syn t a x
AFG2:AMPS:SAT:LEV
AFG2:AMPS:SAT:LEV?
Scr een /field eq u iva len t
AFG2:AMPS:SAT:LEV controls the SAT Levelfield when AFGen2 To
field is set to Audio Outon the SIGNALING ENCODER screen when
the Modefield is set to AMPS-TACSand the Channelfield is set to Voice.
82
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMP S| TACS:SAT:F REQu en cy <r ea l n u m ber >
These commands set/query the supervisory audio tone’s frequency. This
signal is sent continuously whenever AFG2:AMPS:CHAN ‘Voice’ is
used, but is interrupted when a FVC message is sent.
but does not use the :STATe command.
Syn t a x
AFG2:AMPS:SAT:FREQ
Scr een /field eq u iva len t
AFG2:AMPS:SAT:FREQ controls the SAT Freq field on the
SIGNALING ENCODER screen when the Modefield is set to
AMPS-TACSand the Channelfield is set to Voice.
:AMP S| TACS:STANd a r d <str in g>
:AMP S| TACS:STANd a r d ?
These commands set/query the radio standard for the encoder.
Syn t a x
AFG2:AMPS:STAN ‘AMPS’
‘TACS’
‘JTACS’
AFG2:AMPS:STAN?
Scr een /field eq u iva len t
AFG2:AMPS:STAN controls the Standardfield on the SIGNALING
ENCODER screen when the Modefield is set to AMPS-TACS.
Chapter 1
83
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:DTMF :F REQu en cy:COLu m n <m u ltip le r ea l n u m b er >
:DTMF :F REQu en cy:COLu m n ?
These commands set/query the frequencies for the vertical columns in
the symbol frequencies table of the DTMF encoder.
Syn t a x
AFG2:DTMF:FREQ:COL <integer value>,<real number>
AFG2:DTMF:FREQ:COL? <integer value>
Scr een /field eq u iva len t
AFG2:DTMF:FREQ:COL controls vertical columns in the Symbol
Frequencies (Hz): table on the SIGNALING ENCODER screen
when the Modefield is set to DTMF.
:DTMF :F REQu en cy:ROW <m u lt ip le r ea l n u m ber >
:DTMF :F REQu en cy:ROW?
These commands set/query the frequencies for the horizontal rows in
the symbol frequencies table of the DTMF encoder.
Syn t a x
AFG2:DTMF:FREQ:ROW <integer value>,<real number>
AFG2:DTMF:FREQ:ROW? <integer value>
Scr een /field eq u iva len t
AFG2:DTMF:FREQ:ROW controls horizontal rows in the Symbol
Frequencies (Hz):table on the SIGNALING ENCODER screen when
the Modefield is set to DTMF.
:DTMF :OF FTim e <r ea l n u m b er >
:DTMF :OF FTim e?
These commands set/query the length of time each DTMF tone is off
during the sequence.
Syn t a x
AFG2:DTMF:OFFT <real number>
AFG2:DTMF:OFFT?
Scr een /field eq u iva len t
AFG2:DTMF:OFFT controls the Off Timefield on the SIGNALING
ENCODER screen when the Modefield is set to DTMF.
84
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:DTMF :ONTim e <r ea l n u m ber >
:DTMF :ONTim e?
These commands set/query the length of time each DTMF tone is on
during the sequence.
but does not use the :STATe command.
Syn t a x
AFG2:DTMF:ONT <real number>
AFG2:DTMF:ONT?
Scr een /field eq u iva len t
AFG2:DTMF:ONT controls the On Timefield on the SIGNALING
ENCODER screen when the Modefield is set to DTMF.
:DTMF :SEQu en ce <str in g>
:DTMF :SEQu en ce?
These commands set/query the sequence of tones output by the
signaling encoder.
Syn t a x
AFG2:DTMF:SEQ <string>
AFG2:DTMF:SEQ?
Scr een /field eq u iva len t
AFG2:DTMF:SEQ controls the Sequencefield on the SIGNALING
ENCODER screen when the Modefield is set to DTMF.
Chapter 1
85
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:DTMF :STANd a r d <str in g>
:DTMF :STANd a r d ?
These commands set/query the standard applied to the encoded data.
The standard affects the types of frames that can be sent, the range of
valid channel numbers, the encoding of the frame data, and the
interpretation of received frames.
Syn t a x
AFG2:DTMF:STAN ‘Bell’
AFG2:DTMF:STAN?
Scr een /field eq u iva len t
AFG2:DTMF:STAN controls the Standardfield on the SIGNALING
ENCODER screen when the Modefield is set to DTMF.
:DTMF :TWISt <r ea l n u m ber >
:DTMF :TWISt?
These commands set/query the ratio of amplitudes (in dB) between the
high frequency and low frequency tone in each DTMF pair. A positive
twist value indicates a higher amplitude for the high frequency tone. A
negative value indicates a higher amplitude for the low frequency tone.
Twist and pre-emphasis affect the relative levels of the high and low
tones within each symbol (tone pair). See the “Twist and Pre-emphasis”
in the Reference Guide for details about the interactions of twist and
pre-emphasis.
but does not use the :INCR or :STATe commands.
Syn t a x
AFG2:DTMF:TWIS <real number>
AFG2:DTMF:TWIS?
Scr een /field eq u iva len t
AFG2:DTMF:TWIS controls the Twistfield on the SIGNALING
ENCODER screen when the Modefield is set to DTMF.
86
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:F GENer a tor :SUNits <str in g>
:F GENer a tor :SUNits?
These commands set/query whether the signal’s output is in units of
rms or peak. The AFG2:DEST ‘Audio Out’ command must be used with
this command.
Syn t a x
AFG2:FGEN:SUN ‘RMS’
‘Peak’
AFG2:FGEN:SUN?
Scr een /field eq u iva len t
AFG2:FGEN:WAV controls the Sine Unitsfield on the SIGNALING
ENCODER screen when the Modefield is set to Func Genand the
AFGen2 Tofield is set to Audio Out.
:F GENer a tor :WAVefor m <str in g>
:F GENer a tor :WAVefor m ?
These commands set/query the type of waveform generated by the
function generator.
Syn t a x
AFG2:FGEN:WAV ‘Sine’
‘Square’
‘Triangle’
‘Ramp(+)’ !Positive-going ramp
‘Ramp(-)’ !Negative-going ramp
‘DC(+)’
‘DC(-)’
‘Uni Noise’ !Universal noise
‘Gau Noise’ !Gaussian noise
AFG2:FGEN:WAV?
Scr een /field eq u iva len t
AFG2:FGEN:WAV controls the Waveformfield on the SIGNALING
ENCODER screen when the Modefield is set to Func Gen.
Chapter 1
87
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:BUSY <str in g>
:NAMP s| NTACs:BUSY?
These commands set/query the busy/idle status information included in
the signaling sequence.
•
•
•
‘Idle’ sets the busy/idle bits of the forward control channel
information to indicate an idle state.
‘Busy’ sets the busy/idle bits of the forward control channel
information to indicate an busy state.
‘WS Delay’ (word sync delay) prevents a busy/idle change until the
word sync information has been received and a defined number of
delay bits has been counted. The delay is set with the
AFG2:NAMPS:BUSY:DEL command.
•
‘1stBitDly’ (first bit delay) causes the busy/idle bit to be set after a
bit has been received and a defined number of delay bits has been
counted. The delay is set with the AFG2:NAMPS:BUSY:DEL
command.
This command requires that the AFG2:NAMPS:CHAN command
specifies ‘Cntl’.
Syn t a x
AFG2:NAMP:BUSY ‘Idle’
‘Busy’
‘WS Delay
‘1stBitDly’
AFG2:NAMP:BUSY?
Scr een /field eq u iva len t
AFG2:NAMP:BUSY controls the Busy/Idleon the SIGNALING
ENCODER screen when the Modefield is set to NAMP-NTACand the
Channelfield is set to Cntl.
88
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:BUSY:DELa y <in teger >
This command sets the number of bits that are counted before a
busy/idle bit changes form the idle state to the busy state. This function
is used in conjunction with the WS Delay and 1stBitDly settings of the
:NAMPs| NTACs:BUSY command.
Syn t a x
AFG2:NAMP:BUSY:DEL <real number>
Scr een /field eq u iva len t
AFG2:NAMP:BUSY:DEL controls the B/I Delayfield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTACand the Channelfield is set to Cntl.
:NAMP s| NTACs:CHANn el <str in g>
:NAMP s| NTACs:CHANn el?
These commands set/query the channel type. ‘Cntl’ selects the forward
control channel (FOCC). ‘Voice’ selects the forward voice channel (FVC).
Syn t a x
AFG2:NAMP:CHAN ‘Cntl’
‘Voice’
AFG2:NAMP:CHAN?
Scr een /field eq u iva len t
AFG2:NAMP:CHAN controls the Channelfield on the SIGNALING
ENCODER screen when the Modefield is set to NAMP-NTAC.
Chapter 1
89
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:DSAT:MESS <str in g>
:NAMP s| NTACs:DSAT:MESS?
These commands set/query the 24-bit digital supervisory audio tone
(DSAT) sequence. The seven standard sequences are: 2556CB, 255B2B,
256A9B, 25AD4D, 26AB2B, 26B2AD, and 2969AB. (These codes are the
inverse of the seven DST codes.)
DSAT is output continuously when AFG2:NAMP:DSAT:SEND is sent.
It is only stopped when AFG2:NAMP:DSAT:STOP is sent, or when the
DST message stream is sent.
Syn t a x
AFG2:NAMP:DSAT:MESS <string>
AFG2:NAMP:DSAT:MESS?
Scr een /field eq u iva len t
AFG2:NAMP:DSAT:MESS controls the FVC DSATfield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Voice.
:NAMP s| NTACs:DSAT:SEND <str in g>
:NAMP s| NTACs:DSAT:SEND?
This command set/query sends the 24-bit digital supervisory audio tone
(DSAT) sequence. DSAT is output continuously when
AFG2:NAMP:DSAT:SEND is sent. It is only stopped when
AFG2:NAMP:DSAT:STOP is sent, or when a message or DST is sent. If
a message or DST is sent, the DSAT data is output after the message is
output.
Syn t a x
AFG2:NAMP:DSAT:SEND
AFG2:NAMP:DSAT:SEND?
Scr een /field eq u iva len t
AFG2:NAMP:DSAT:SEND controls the FVC Send DSATfield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Voice.
90
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:DSAT:STOP
This command stops the DSAT if it is being sent. See
Syn t a x
AFG2:NAMP:DSAT:STOP
Scr een /F ield E q u iva len t
AFG2:NAMP:DSAT:STOP controls the Stop DSATfield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Voice.
:NAMP s| NTACs[:F OCC]:AM <r ea l n u m ber >
:NAMP s| NTACs[:F OCC]:AM?
This command sets/queries the data level when the AFG2:DEST ‘AM’
command is used. The data level units are %.
Syn t a x
AFG2:NAMP:FOCC:AM
AFG2:NAMP:FOCC:AM?
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:AM controls the Data Levelfield when AFGen2
Tofield is set to AMon the SIGNALING ENCODER screen when the
Modefield is set to NAMP-NTAC, and the Channelfield is set to Cntl.
Chapter 1
91
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs[:F OCC]:F M <r ea l n u m ber >
:NAMP s| NTACs[:F OCC]:F M?
This command sets/queries the data level when the AFG2:DEST ‘FM’
command is used. The data level units are kHz.
Syn t a x
AFG2:NAMP:FOCC:FM
AFG2:NAMP:FOCC:FM?
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:FM controls the Data Levelfield when AFGen2
Tofield is set to FMon the SIGNALING ENCODER screen when the
Modefield is set to NAMP-NTAC, and the Channelfield is set to Cntl.
:NAMP s| NTACs[:F OCC]:LEVel <r ea l n u m ber >
:NAMP s| NTACs[:F OCC]:LEVel?
These commands set/query the data level when the AFG2:DEST ‘Audio
Out’ command is used. The data level units are mV.
Syn t a x
AFG2:NAMP:FOCC:LEV
AFG2:NAMP:FOCC:LEV?
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:LEV controls the Data Levelfield when AFGen2
Tofield is set to Audio Outon the SIGNALING ENCODER screen
when the Modefield is set to NAMP-NTAC, and the Channelfield is set to
Cntl.
92
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs[:F OCC]:RATE <r ea l n u m ber >
:NAMP s| NTACs[:F OCC]:RATE ?
These commands set/query the data rate of the encoded message.
but does not use the :STATe command.
Syn t a x
AFG2:NAMP:FOCC:RATE
AFG2:NAMP:FOCC:RATE?
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:RATE controls the Data Rate field on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Cntl.
:NAMP s| NTACs[:F OCC]:F ILLer :DATA1 <str in g>
:NAMP s| NTACs[:F OCC]:F ILLer :DATA2 <str in g>
:NAMP s| NTACs[:F OCC]:F ILLer :DATA1?
:NAMP s| NTACs[:F OCC]:F ILLer :DATA2?
These commands set/query FOCC filler data. Each filler contains 7
hexadecimal characters representing the 2 type bits and 26 information
bits of the control filler/message word. The control filler is sent
continuously when the :NAMPs| NTACs[:FOCC]:FILL:SEND command
is used or after a control message has been sent using
:NAMPs| NTACs:SEND.
Both filler fields must be full (seven digits) for the forward control
channel information to be structured correctly. Do not leave any blank
spaces.
To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:NAMP[:FOCC]:FILL:DATA1 <string>
AFG2:NAMP[:FOCC]:FILL:DATA2 <string>
AFG2:NAMP[:FOCC]:FILL:DATA1?
AFG2:NAMP[:FOCC]:FILL:DATA2?
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:FILL:DATA1 and DATA 2 control the Filler
fields for Stream A and Stream B on the SIGNALING ENCODER
screen when the Modefield is set to NAMP-NTAC, and the Channelfield is
set to Cntl.
Chapter 1
93
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs[:F OCC]:F ILLer :SEND
This command sends the filler information that is entered with the
AFG2:FILL:DATA1 and AFG2:FILL:DATA2 commands.
To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:NAMP[:FOCC]:FILL:SEND
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:FILL:SEND controls the Send Fillerfield on
the SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Cntl.
:NAMP s| NTACs[:F OCC]:F ILLer :STOP
This command stops the output of filler data.
To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:NAMP[:FOCC]:FILL:STOP
Scr een /field eq u iva len t
AFG2:NAMP[:FOCC]:FILL:STOP controls the Stop Fillerfield on
the SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Cntl.
94
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP S| NTACS[:F OCC]:MESSa ge:DATA1 <str in g>
:NAMP S| NTACS[:F OCC]:MESSa ge:DATA2 <str in g>
:NAMP S| NTACS[:F OCC]:MESSa ge:DATA1?
:NAMP S| NTACS[:F OCC]:MESSa ge:DATA2?
These commands set/query FOCC Stream A and Stream B message
data. Like the filler data, the message information can only be input in
full (seven digit) lines. Also, message streams A and B must have the
same number of lines in them.
To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.
Syn t a x
AFG2:NAMP[:FOCC]:MESS:DATA1 <string>
AFG2:NAMP[:FOCC]:MESS:DATA2 <string>
AFG2:NAMP[:FOCC]:MESS:DATA1?
AFG2:NAMP[:FOCC]:MESS:DATA2?
Scr een /field eq u iva len t
AFG2:NAMP:MESS controls the Messagefields for FOCC Stream A
and Stream B on the SIGNALING ENCODER screen when the Mode
field is set to NAMP-NTAC. These fields are displayed only when the
Channelfield is set to Cntl.
:NAMP s| NTACs:F VC:MESS <str in g>
:NAMP s| NTACs:F VC:MESS?
These commands set/query the seven hexadecimal characters (28 bits)
of the FVC message. These 7 characters are combined with 12 parity
bits calculated by the encoder to output a 40-character data stream.
This data is output when the AFG2:NAMP:FVC:SEND ‘Message’
command is sent.
The entire field must contain data. No blank spaces are allowed. The
DSAT is turned off while the FVC message stream is sent.
Syn t a x
AFG2:NAMP:FVC:MESS <string>
AFG2:NAMP:FVC:MESS?
Scr een /field eq u iva len t
AFG2:NAMP:FVC:MESS controls the FVC Messagefield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Voice.
Chapter 1
95
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:F VC:R ATE <r ea l n u m ber >
:NAMP s| NTACs:F VC:R ATE?
These commands set/query the data rate of the encoded message.
but does not use the :STATe command.
Syn t a x
AFG2:NAMP:FVC:RATE <real number>
AFG2:NAMP:FVC:RATE?
Scr een /field eq u iva len t
AFG2:NAMP:FVC:RATE controls the Data Rate field on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Voice.
:NAMP s| NTACs:F VC:AM <r ea l n u m b er >
:NAMP s| NTACs:F VC:AM?
This command sets/queries the data level when the AFG2:DEST ‘AM’
command is used. The data level units are %.
Syn t a x
AFG2:NAMP:FVC:AM
AFG2:NAMP:FVC:AM?
Scr een /field eq u iva len t
AFG2:NAMP:FVC:AM controls the Data Levelfield when AFGen2 To
field is set to AMon the SIGNALING ENCODER screen when the Mode
field is set to NAMP-NTAC, and the Channelfield is set to Voice.
96
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:F VC:F M <r ea l n u m b er >
:NAMP s| NTACs:F VC:F M?
This command sets/queries the data level when the AFG2:DEST ‘FM’
command is used. The data level units are kHz.
Syn t a x
AFG2:NAMP:FVC:FM
AFG2:NAMP:FVC:FM?
Scr een /field eq u iva len t
AFG2:NAMP:FVC:FM controls the Data Levelfield when AFGen2 To
field is set to FMon the SIGNALING ENCODER screen when the Mode
field is set to NAMP-NTAC, and the Channelfield is set to Voice.
:NAMP s| NTACs:F VC:LEVel <r ea l n u m ber >
:NAMP s| NTACs:F VC:LEVel?
These commands set/query the data level when the AFG2:DEST ‘Audio
Out’ command is used. The data level units are mV.
Syn t a x
AFG2:NAMP:FVC:LEV
AFG2:NAMP:FVC:LEV?
Scr een /field eq u iva len t
AFG2:NAMP:FVC:LEV controls the Data Levelfield when AFGen2 To
field is set to Audio Outon the SIGNALING ENCODER screen when
the Modefield is set to NAMP-NTAC, and the Channelfield is set to Voice.
Chapter 1
97
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMP s| NTACs:SEND
:NAMP s| NTACs:SEND?
This command sets/queries the type of data sent when the AFG2:SEND
command is used.
•
Selecting ‘Message’ sends the contents of the forward voice message
(AFG2:NAMP:FVC:MESS <string>).
•
Selecting ‘DST’ causes the digital signaling tone sequence to be
output. The DST sequence that is sent is the inverse of the sequence
entered in the DSAT message (AFG2:DSAT:MESS <string>).
Syn t a x
AFG2:NAMP:FVC:SEND ‘Message’
‘DST’
AFG2:NAMP:FVC:SEND?
Scr een /F ield E q u iva len t
AFG2:NAMP:FVC:SEND controls the FVC Message/DSTfield on the
SIGNALING ENCODER screen when the Modefield is set to
NAMP-NTACand the Channelfield is set to Voice.
:NAMP S| NTACS:STANd a r d <str in g>
:NAMP S| NTACS:STANd a r d ?
These commands set/query the radio standard for the encoder.
Syn t a x
AFG2:NAMP:STAN ‘NAMPS’
‘NTACS’
AFG2:NAMP:STAN?
Scr een /field eq u iva len t
AFG2:NAMP:STAN controls the Standardfield on the SIGNALING
ENCODER screen when the Modefield is set to NAMP-NTAC.
98
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
CANa lyzer su bsystem
The CANalyzer subsystem controls functions unique to the CDMA
ANALYZER screen.
:ACP :P OWer :CALibr a te
This command initiates calibration of the adjacent channel power
measurement for the current RF analyzer frequency at the selected
frequency offset and filter bandwidth.
Syn t a x
CAN:ACP:POW:CAL
E xa m p le
CAN:ACP:POW:CAL !calibrates ACP measurement
Scr een /field eq u iva len t
CAN:ACP:POW CAL controls the ACP Calfield on the CDMA
ANALYZER screen.
:ACP :P OWer :F ILTer <r ea l n u m ber >
:ACP :P OWer :F ILTer ?
This command selects the filter bandwidth over which the adjacent
channel power measurement is made in the adjacent channels. Valid
values are 10 kHz to 1.23 MHz with 500 Hz resolution.
Syn t a x
CAN:ACP:POW:FILT <real number>
CAN:ACP:POW:FILT?
E xa m p le
CAN:ACP:POW:FILT 10 kHz !sets the filter BW to 10 kHz
CAN:ACP:POW:FILT?
!returns the filter BW setting
Scr een /field eq u iva len t
CAN:ACP:POW:FILT controls the ACP Fltr BWfield on the CDMA
ANALYZER screen.
Chapter 1
99
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:ACP :P OWer :OF F Set <r ea l n u m ber >
:ACP :P OWer :OF F Set?
This command sets the frequency offset used when making adjacent
channel power measurements. The setting designates the frequency
offset from the center frequency at which the measurement is made.
Valid values are 100 kHz to 3 MHz.
Syn t a x
CAN:ACP:POW:OFFS <real number>
CAN:ACP:POW:OFFS?
E xa m p le
CAN:ACP:POW:OFFS 100 kHz !sets the freq. offset to 100 kHz
CAM:ACP:POW:OFFS?
!returns freq. offset setting
Scr een /field eq u iva len t
CAN:ACP:POW:OFFS controls the ACP Offsetfield on the CDMA
ANALYZER screen.
:ARM
This command arms the measurements based on the type of
measurement (single or continuous), qualifying events, and triggering
events.
To put the CDMA analyzer in single triggering mode, use the
TRIG:MODE:RETR SING command.
For continuous triggering, use TRIG:MODE:RETR REP.
Syn t a x
CAN:ARM
!arms the CDMA analyzer measurements
E xa m p le
TRIG:MODE:RETR SING !sets the trigger mode to Single
CAN:ARM
!arms the measurement
Scr een /field eq u iva len t
CAN:ARM controls the Arm Meassubfield of the Analyzerfield.
100
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:AUTO:GAIN?
This command returns the gain setting. The value and mode of the gain
are set by the commands :PATH:GAIN and :PATH:GAIN:MODE. This
query is valid only while measuring rho, EVM or channel power.
Syn t a x
CAN:AUTO:GAIN?
Scr een /field eq u iva len t
CAN:AUTO:GAIN? queries the Gainfield of the CDMA ANALYZER
screen. This field is displayed when a rho, EVM, or channel power
measurement is selected.
:AUTO:P OWer :GAIN?
This command returns the gain setting. The value and mode of the gain
are set by the commands :POW:GAIN and :POW:GAIN:MODE. This
query is valid only while measuring average power.
Syn t a x
CAN:AUTO:POW:GAIN?
Scr een /field eq u iva len t
CAN:AUTO:POW:GAIN? queries the Pwr Gainfield of the CDMA
ANALYZER screen when measuring average power.
:CHANn el:P OWer :CALibr a te
This command calibrates the channel power measurement. The Test
Set requires a few moments to complete this calibration. To determine
when the calibration is finished, poll the status register.
Syn t a x
CAN:CHAN:POW:CAL
E xa m p le
CAN:CHAN:POW:CAL
!calibrates channel power
Scr een /field eq u iva len t
CAN:CHAN:POW:CAL controls the Chn Pwr Calfield of the CDMA
ANALYZER screen while measuring channel power.
Chapter 1
101
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:CHANn el:P OWer :F ILTer
:CHANn el:P OWer :F ILTer ?
These commands set/query the filter for the channel power
measurement.
•
‘1.23M’ measures the absolute channel power level of the RF signal
in a 1.23 MHz bandwidth centered around the RF channel or tune
frequency setting. This measurement must be calibrated using the
CAN:CHAN:CPOW:CAL command each time the frequency is
changed.
•
‘30kHz’ measures the adjacent channel power (that is the power in
the sidebands around the chosen CDMA channel).
Syn t a x
CAN:CHAN:POW:FILT ‘1.23M’
‘30kHz’
CAN:CHAN:POW:FILT?
Scr een /field eq u iva len t
CAN:CHAN:POW:FILT controls the Ch Pwr Filtfield of the CDMA
ANALYZER screen while measuring channel power.
:DARM
This command works with the :ARM command to control the
measurements.
Syn t a x
CAN:DARM
Scr een /field eq u iva len t
CAN:DARM controls the Disarmsubfield of the Analyzerfield on the
CDMA ANALYZER screen.
102
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:DIRection <str in g>
:DIRection ?
These commands set/query the direction of the CDMA analyzer. This
command is valid only when frequency tuning mode is selected
(CONF:RFD ‘Freq’).
:DIR is not used while measuring average power.
Syn t a x
CAN:DIR ‘Fwd’
‘Rev’
CAN:DIR?
Scr een /field eq u iva len t
CAN:DIR controls the Anl Dirfield of the CDMA ANALYZER screen.
:EVENt :QUALifier <str in g>
:EVENt :QUALifier ?
These commands set/query the qualifying event for the trigger. The
qualifying event is the event that must occur before a trigger is
accepted. The trigger event is set by the :EVEN:TRIG command.
Syn t a x
CAN:EVEN:QUAL ‘None’
‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Ampl Lo’
‘Ampl Mid’
‘Ampl Hi’
‘External’
CAN:EVEN:QUAL?
Scr een /field eq u iva len t
CAN:EVEN:QUAL sets the Qual Eventfield on the CDMA
ANALYZER screen.
Chapter 1
103
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:EVENt :TRIGger <str in g>
:EVENt :TRIGger ?
These commands set/query the trigger setting of the CDMA
ANALYZER screen.
Syn t a x
CAN:EVEN:TRIG ‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Delay’
‘Immed’
CAN:EVEN:TRIG?
E xa m p le
CAN:EVEN:TRIG ‘Delay’
!sets the trigger to run after the delay has been set by the
CAN:EVEN:TRIG:DEL command.
CAN:EVEN:TRIG ‘2 s’ !sets the trigger to run after 2 seconds
Scr een /field eq u iva len t
CAN:EVEN:TRIG sets the Trig Eventfield of the CDMA ANALYZER
screen.
:EVENt :TRIGger :DELa y <r ea l n u m ber >
:EVENt :TRIGger :DELa y?
These commands set/query the delay value of the trigger when the
Number Setting Syntax” on page 299, but does not use the :DUNits,
:UNITs, or :STATe commands.
Syn t a x
CAN:EVEN:TRIG:DEL <real number> !values from 20 µs to 10 s
CAN:EVEN:TRIG:DEL?
!returns the value set
Scr een /field eq u iva len t
CAN:EVEN:TRIG:DEL controls the Trig Eventfield on the CDMA
ANALYZER screen when the Trig Eventfield is set to Delay.
104
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:MODE <str in g>
:MODE?
These commands set/query the measurement displayed in the upper
left corner of the display.
Syn t a x
CAN:MODE ‘Avg Pwr’
‘ACP’
‘Rho’
‘EVM’
‘Chan Pwr’
CAN:MODE?
Scr een /field eq u iva len t
CAN:MODE selects the measurement to be displayed in the upper-left
corner of the screen.
Chapter 1
105
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:PATH:GAIN <str in g>
:PATH:GAIN?
These commands set/query the gain of the CDMA analyzer. This
command will only be enabled when autoranging is turned off
(CAN:PATH:MODE ‘Hold’).
This command may conflict with the code domain analyzer ’s settings
CDAN:PATH:GAIN and CDAN:PATH:MODE. For example, if
autoranging is turned off (‘Hold’) in the CDMA analyzer and turned on
in the Code Domain Analyzer (‘Auto’) the ‘Hold’ setting will always
override the ‘Auto’ setting. When autoranging is turned off, setting
either analyzer ’s gain will automatically change the other ’s to the same
setting.
Use the CAN:POW:GAIN command when making an average power
measurement.
Syn t a x
CAN:PATH:GAIN ‘0 dB’
‘6 dB’
‘12 dB’
‘18 dB’
‘24 dB’
‘30 dB’
‘36 dB’
CAN:PATH:GAIN?
Scr een /field eq u iva len t
CAN:PATH:GAIN sets the lower subfield of the Gainfield of the CDMA
ANALYZER screen. This subfield is only selectable when the upper
subfield is set to Hold.
106
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:PATH:GAIN:MODE <st r in g>
:PATH:GAIN:MODE?
These commands set/query the mode of the Gainfield, allowing you to
choose between an autoranging gain (‘Auto’) or a fixed gain (‘Hold’).
This command may conflict with the code domain analyzer ’s settings
CDAN:PATH:GAIN and CDAN:PATH:MODE. For example, if
autoranging is turned off (‘Hold’) in the CDMA analyzer and turned on
in the Code Domain Analyzer (‘Auto’), the ‘Hold’ setting will always
override the ‘Auto’ setting. When autoranging is turned off, setting
either analyzer ’s path gain will automatically change the other ’s to the
same setting.
For average power measurements, use the CAN:POW:GAIN:MODE
command.
Syn t a x
CAN:PATH:GAIN:MODE ‘Auto’
‘Hold’
CAN:PATH:GAIN:MODE?
Scr een /field eq u iva len t
CAN:PATH:GAIN:MODE sets the Auto/Holdsubfield of the Gainfield
of the CDMA ANALYZER or CODE DOM screen.
:P NINcr em en t <r ea l n u m ber >
:P NINcr em en t?
These commands set/query the PN increment. If you know the PN
increment, enter it with this command to speed the PN offset search. If
you do not know the increment, enter a 1.
Syn t a x
CAN:PNIN <real number> !values from 1 to 256
CAN:PNIN?
!returns the value of the PN increment
Scr een /field eq u iva len t
CAN:PNIN:INCR controls the PN Incrmentfield on the CDMA
ANALYZER. This field is displayed only when the Find PNfield is set to
Auto.
Chapter 1
107
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:P NMod e <st r in g>
:P NMod e?
These commands set/query the PN offset mode.
•
•
‘Auto’ is used to calculate the system’s PN offset if it is unknown.
When ‘Auto’ is selected, the CAN:PNIN command can be used to
enter a PN increment and speed the PN offset calculation.
‘Manual’ is used to enter a known PN offset. When ‘Manual’ is
selected, the PN offset is entered using the CAN:PNOF command.
Syn t a x
CAN:PNM ‘Auto’
‘Manual’
CAN:PNM? !returns the PN Offset mode
Scr een /field eq u iva len t
CAN:PNM controls the Find PNfield on the CDMA ANALYZER screen.
:P NOF fset <r ea l n u m b er >
:P NOF fset?
These commands set/query the PN offset of the system.
Syn t a x
CAN:PNOF <real number> !values from 0.0 to 511.984375
CAN:PNOF?
!returns the value of the PN Offset
Scr een /field eq u iva len t
CAN:PNOF controls the PN Offsetfield on the CDMA ANALYZER
screen. This field is displayed only when the Find PNfield is set to
Manual.
108
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:P OWer :GAIN <str in g>
:P OWer :GAIN?
These commands set/query the gain of the CDMA analyzer. These
commands are valid only when an average power (Avg Pwr)
measurement is selected. For channel power, EVM, or rho
measurements, use the CAN:PATH:GAIN command.
Syn t a x
CAN:POW:GAIN ‘0 dB’
‘6 dB’
‘12 dB’
‘24 dB’
‘30 dB’
‘36 dB’
‘42 dB’
‘48 dB’
‘54 dB’
‘60 dB’
‘66 dB’
‘72 dB’
CAN:POW:GAIN?
Scr een /field eq u iva len t
CAN:POW:GAIN sets the Pwr Gainfield of the CDMA ANALYZER
screen when Avg Pwris displayed.
Chapter 1
109
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:P OWer :GAIN:MODE <str in g>
:P OWer :GAIN:MODE?
These commands set/query the mode of the Pwr Gainfield, allowing
you to choose between automatic gain (Auto) or fixed gain (Hold).This
command is valid only when average power is selected. For channel
power, EVM and rho measurements, use the CAN:PATH:GAIN:MODE
command.
Syn t a x
CAN:POW:GAIN:MODE ‘Auto’
‘Hold’
CAN:POW:GAIN:MODE?
Scr een /field eq u iva len t
CAN:POW:GAIN:MODE sets the Auto/Holdsubfield of the Pwr Gain
field of the CDMA ANALYZER screen, when Avg Pwris displayed.
:P OWer :SAMP le:TIME <r ea l n u m ber >
:P OWer :SAMP le:TIME?
These commands set/query the power interval. This interval is the
amount of time that average power or channel power is measured.This
does not use the :STATe command.
Syn t a x
CAN:POW:SAMP:TIME <real number>
!values from 0.00025 to .02666 s
CAN:POW:SAMP:TIME?
Scr een /field eq u iva len t
CAN:POW:SAMP:TIME sets the Pwr Intvlfield of the CDMA
ANALYZER screen.
110
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:P OWer :ZERO
This command zeroes the power meter for an average power
measurement.
Syn t a x
CAN:POW:ZERO
Scr een /field eq u iva len t
CAN:POW:ZERO controls the Pwr Zerofield on the CDMA ANALYZER
screen. This field is only available when the average power
measurement is selected.
:P OWer :ZERO:MODE <str in g>
:P OWer :ZERO:MODE?
These commands set/query whether the power meter is automatically
zeroed or if the zero function must be manually activated. This
command is used for average power measurements.
Syn t a x
CAN:POW:ZERO:MODE ‘Auto’
‘Manual’
CAN:POW:ZERO:MODE?
Scr een /field eq u iva len t
CAN:POW:ZERO:MODE controls the Auto Zerofield on the CDMA
ANALYZER screen. This field is only available when the average power
measurement is selected.
Chapter 1
111
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:SAMP le:TIME <r ea l n u m ber >
:SAMP le:TIME?
These commands set/query the amount of time that rho or EVM is
Syn t a x
CAN:SAMP:TIME <real number>
!values from 0.00025 to 0.02 seconds, for Forward Analyzer
Direction (CAN:DIR ‘Fwd’)
!values from 0.0025 to 0.01 seconds for Reverse Channel
Direction (CAN:DIR ‘Rev’)
CAN:SAMP:TIME?
Scr een /field eq u iva len t
CAN:SAMP:TIME sets the Meas Intvlfield of the CDMA ANALYZER
screen when a rho or EVM measurement is selected.
:SP ECia l <st r in g>
:SP ECia l?
These commands set/query the phase of the I and Q signals that are
analyzed by the Test Set.
Syn t a x
CAN:SPEC ‘Normal’ !set for IS-95 standard rotation
‘Inverted’
CAN:SPEC?
Scr een /field eq u iva len t
CAN:SPEC controls the setting of the Anl Specialfield of the CDMA
ANALYZER screen.
112
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CANalyzer subsystem
:TRIGger :STATe <st r in g>
:TRIGger :STATe?
These commands set/query the state of the trigger.
CAN:TRIG:STAT can be overridden with the TRIG:MODE:RETR REP
and TRIG:MODE:RETR SING trigger commands. When the trigger
commands are used, the state of the field on the display is not updated.
(For instance, the screen may show Singleselected when
TRIG:MODE:RETR REP is used.)
Syn t a x
CAN:TRIG:STAT ‘Single’
‘Cont’
CAN:TRIG:STAT?
Scr een /field eq u iva len t
CAN:TRIG:STAT controls Single/Contsubfield of the Analyzerfield
on the CDMA ANALYZER screen.
Chapter 1
113
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CBUFfer subsystem
CBUF fer su bsyst em
CBUF controls the CDMA data buffer. This system allows you to send
CDMA data through the CDMA generator. You can send all zeroes,
external data via the DATA IN connector, random data, or data
supplied via GPIB.
:DATA <48 or 72 ch a r a cter h ex str in g>
:DATA?
These commands set/query the actual data string sent in the CDMA
data buffer. The command CGEN:DATA:SOUR ‘Data Buff’ in the
data source.
Syn t a x
CBUF:DATA <hex string> !48 or 72 character hex string
CBUF:DATA?
Scr een /field eq u iva len t
CBUF:DATA is controlled by the Data Sourcefield of the CDMA
GENERATOR screen, but :DATA has no direct screen equivalent.
:F RAMe:COUNt <in teger > <r ea l n u m ber >
:F RAMe:COUNt?
These commands set/query the number of frames to be transmitted. It
is applicable no matter what the source of data is (data buffer, zeroes,
and :UNITs commands.
Syn t a x
CBUF:FRAM:COUN <integer>,<real number>
CBUF:FRAM:COUN? <integer> !returns the count corresponding to
‘integer’
Scr een /field eq u iva len t
CBUF:FRAM:COUN controls the # of Framesfield of the CDMA
GENERATOR screen. The # of Framefield is displayed when the Data
Sourceis set to Data Buff.
114
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CBUFfer subsystem
:F RAMe:STARt <in teger >,<r ea l n u m ber >
:F RAMe:STARt?
These commands set/query the first frame of data to be sent. This
282, but does not use the :DUNits and :UNITs commands.
Syn t a x
CBUF:FRAM:STAR <integer>,<real number>
CBUF:FRAM:STAR?
Scr een /field eq u iva len t
CBUF:FRAM:STAR controls the Start Framefield of the CDMA
GENERATOR screen.
:F RAMe:LOAD <in teger >,<r ea l n u m ber >
:F RAMe:LOAD?
These commands load/query the data into the GPIB buffer. This
282, but does not use the :DUNits and :UNITs commands.
Syn t a x
CBUF:FRAM:LOAD <integer>,<real number>
CBUF:FRAM:LOAD?
Scr een /field eq u iva len t
CBUF:FRAM:LOAD has no equivalent field.
:MODE <str in g>
:MODE?
These commands set/query the mode of the data buffer.
Syn t a x
CBUF:MODE ‘Single’
‘Cont’
CBUF:MODE?
Scr een /field eq u iva len t
CBUF:MODE controls the Single/Contsubfield of the Data Source
field on the CDMA GENERATOR screen.The Data Sourcefield must
be set to Data Buffto display these choices.
Chapter 1
115
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CBUFfer subsystem
:STATe <st r in g>
:STATe?
These commands set/query the mode of the data buffer.
Syn t a x
CBUF:STAT ‘Idle’
‘Send’
CBUF:STAT?
Scr een /field eq u iva len t
CBUF:STAT controls Idle/Sendsubfield of the Data Sourcefield on
the CDMA GENERATOR screen. The Data Sourcefield must be set to
Data Buffto display these choices.
116
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CCOMmon subsystem
CCOMm on su bsystem
:PATH <str in g>
:PATH?
These commands set/query RF path of the CDMA generator.
Syn t a x
CCOM:PATH ‘Bypass’
‘IQ’
CCOM:PATH?
Scr een /field eq u iva len t
CCOM:PATH controls the CW RF Pathfield of the CDMA GENERATOR
screen.
Chapter 1
117
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
CDANa lyzer su b system
CDAN controls the code domain analyzer.
:CONTr ol <str in g>
:CONTr ol?
These commands set/query the control menu displayed on the code
domain analyzer, when the CDMA standard is set to “IS-95 Only”.
Syn t a x
CDAN:CONT ‘Main’
‘Marker’
‘Trigger’
‘Aux’
‘Gain’
‘PN Setup’
‘FP Setup’
‘CD Setup’
CDAN:CONT?
Scr een /field eq u iva len t
CDAN:CONT controls the menu Controlsfield on the Mainmenu of
the CODE DOM screen,when the CDMA standard is set to “IS-95
Only”.
118
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:CP OWer :CALib r a te
This command initiates the channel power calibration. When this
command is received, an internally generated calibration signal is
measured using the average power technique. Channel power is also
measured and a correction factor is generated. This correction factor is
applied to subsequent channel power measurements. Calibration
should be performed whenever a new set of measurements is made and
whenever the frequency of the measured signal is changed.
Syn t a x
CDAN:CPOW:CAL
Scr een /field eq u iva len t
CDAN:CPOW:CAL controls Chn Pwr Calmeasurement field on the CD
Setup menu of the CODE DOM screen, when the CDMA standard is
set to “IS-95 Only”. The field displayed on the CD Setup menu when
the Measurement field on the Main menu is set to Power or Fast
Power, and the CD pwr unit field on the CD Setup menu is set to Abs.
:EVENt :QUALifier <str in g>
:EVENt :QUALifier ?
These commands set/query the qualifying event for the trigger. The
qualifying event is the event that must occur before a trigger is
accepted. The trigger event is set by the :EVEN:TRIG command.
Syn t a x
CDAN:EVEN:QUAL ‘None’
‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Ampl Lo’
‘Ampl Mid’
‘Ampl Hi
‘External’
Scr een /field eq u iva len t
CDAN:EVEN:QUAL controls the Qual Eventfield of the CODE DOM
screen. This field is displayed on the Triggermenu, when the CDMA
standard is set to “IS-95 Only”.
Chapter 1
119
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:EVENt :TRIGger <str in g>
:EVENt :TRIGger ?
These commands set/query the trigger setting of the CODE DOM
screen.
Syn t a x
CDAN:EVEN:TRIG ‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Delay’
‘Immed’
CDAN:EVEN:TRIG?
Scr een /field eq u iva len t
CDAN:EVEN:TRIG sets the Trig Eventfield of the CODE DOM
screen, when the CDMA standard is set to “IS-95 Only”. This field is
displayed on the Triggermenu.
:EVENt :TRIGger :DELa y <r ea l n u m ber >
:EVENt :TRIGger :DELa y?
These commands set/query the delay value of the trigger when the
Number Setting Syntax” on page 299, but does not use the :DUNits,
:UNITs, or :STATe commands.
Syn t a x
CDAN:EVEN:TRIG:DEL <real number> !values from 20 µs to 10 s
CDAN:EVEN:TRIG:DEL?
!returns the value set
Scr een /field eq u iva len t
CDAN:EVEN:TRIG:DEL controls the Trig Eventfield on the Trigger
menu of the CODE DOM screen when Trig Eventis set to Delay,
when the CDMA standard is set to “IS-95 Only”.
120
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:F P OWer :NAVG <in teger >
:F P OWer :NAVG?
These commands set/query the number of averages made by the fast
power measurement.
Syn t a x
CDAN:FPOW:NAVG <integer>
CDAN:FPOW:NAVG?
Scr een /field eq u iva len t
CDAN:FPOW:NAVG controls the Num Avgsfield on the FP Setupmenu
of the CODE DOM screen, when the CDMA standard is set to “IS-95
Only”.
:F P OWer :TOF F set <r ea l n u m ber >
:F P OWer :TOF F set?
These commands set/query the time offset for the fast power
measurement. :FPOW:TOFF can be either entered with this command,
or it can be transferred via the :FPOW:TOFF:TRAN command.
This number can be entered in microseconds only.
Syn t a x
CDAN:FPOW:TOFF <real number> !0 to 26667
CDAN:FPOW:TOFF?
Scr een /field eq u iva len t
CDAN:FPOW:TOFF controls the Time Offsetfield on the FP Setup
menu of the CODE DOM screen, when the CDMA standard is set to
“IS-95 Only”.
:F P OWer :TOF F set:TRANsfer
This command transfers the measured time offset from the Tm Ofs
measurement field to the Time Offsetfield.
Syn t a x
CDAN:FPOW:TOFF:TRAN
Scr een /field eq u iva len t
CDAN:FPOW:TOFF:TRAN controls the Ofs Trnsferfield on the
FP Setupmenu of the CODE DOM screen, when the CDMA standard is
set to “IS-95 Only”.
Chapter 1
121
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:GAIN <str in g>
:GAIN?
These commands set/query the gain of the code domain analyzer. This
command will only be enabled when autoranging is turned off
(CDAN:GAIN:MODE ‘Hold’).
This command may conflict with the CDMA analyzer ’s settings
CAN:PATH:GAIN and CAN:PATH:MODE. For example, if autoranging
is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code
Domain Analyzer (‘Auto’), the ‘Hold’ setting will always override the
‘Auto’ setting. When autoranging is turned off, setting either analyzer ’s
gain will automatically change the other ’s to the same setting.
Use the CAN:POW:GAIN command when making an average power
measurement.
Syn t a x
CDAN:GAIN ‘0 dB’
‘6 dB’
‘12 dB’
‘18 dB’
‘24 dB’
‘30 dB’
‘36 dB’
CDAN:GAIN?
Scr een /field eq u iva len t
CDAN:GAIN sets the lower subfield of the Gainfield of the CODE DOM
screen, when the CDMA standard is set to “IS-95 Only”. This subfield is
only selectable when the upper subfield is set to Hold.
122
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:GAIN:MODE <str in g>
:GAIN:MODE?
These commands set/query the mode of the Gainfield, allowing you to
choose between an autoranging gain (‘Auto’) or a fixed gain (‘Hold’).
This command may conflict with the CDMA analyzer ’s settings
CAN:PATH:GAIN and CAN:PATH:MODE. For example, if autoranging
is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code
Domain Analyzer (‘Auto’), the ‘Hold’ setting will always override the
‘Auto’ setting. When autoranging is turned off, setting either analyzer ’s
path gain will automatically change the other ’s to the same setting.
For average power measurements, use the CAN:POW:GAIN:MODE
command.
Syn t a x
CDAN:GAIN:MODE ‘Auto’
‘Hold’
CDAN:GAIN:MODE?
Scr een /field eq u iva len t
CDAN:GAIN:MODE sets the Auto/Holdsubfield of the Gainfield of the
CODE DOM screen, when the CDMA standard is set to “IS-95 Only”.
:GAIN:VALu e?
This command queries the gain of the code domain analyzer. This
command will only be enabled when autoranging is turned on
(CDAN:GAIN:MODE ‘Auto’).
Syn t a x
CDAN:GAIN:VAL? !returns 0 dB,6 dB,12 dB,18 dB,24 dB, 30 db,
36 dB
Scr een /field eq u iva len t
When the CDMA standard is set to “IS-95 Only”, the
CDAN:GAIN:VAL? reads the lower subfield of the Gainfield of the
CODE DOM screen when the upper subfield is set to Auto,
Chapter 1
123
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:MARKer :P OSition <r ea l n u m b er >
:MARKer :P OSition ?
These commands set/query the position of the marker.
Syn t a x
CDAN:MARK:POS <real number> !values from 0 to 63
CDAN:MARK:POS?
Scr een /field eq u iva len t
CDAN:MARK:POS controls the Walsh Chanfield on the Markermenu
of the CODE DOM screen, when the CDMA standard is set to “IS-95
Only”.
:MEASu r e <str in g>
:MEASu r e?
These commands set/query the type of measurement performed in the
CODE DOM screen.
Syn t a x
CDAN:MEAS ‘Power’
‘Fast Pwr’
‘Timing’
‘Phase’
CDAN:MEAS?
Scr een /field eq u iva len t
CDAN:MEAS controls the Measurementfield of the Mainmenu on the
CODE DOM screen, when the CDMA standard is set to “IS-95 Only”.
124
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:MODE <str in g>
:MODE?
These commands set/query the measurement state of the code domain
analyzer.
CDAN:MODE can be overridden with the TRIG:MODE:RETR REP and
TRIG:MODE:RETR SING trigger commands. When the trigger
commands are used, the state of the field on the display is not updated.
(For instance, the screen may show Singleselected when
TRIG:MODE:RETR REP is used.)
Syn t a x
CDAN:MODE ‘Single’
‘Cont’
CDAN:MODE?
Scr een /field eq u iva len t
CDAN:MODE controls the Single/Contsubfield of the Measurement
field on the Mainmenu of the CODE DOM screen, when the CDMA
standard is set to “IS-95 Only”.
:PATH:GAIN <r ea l n u m ber >
:PATH:GAIN?
These commands set/query the gain into the code domain analyzer. This
command fine tunes the gain setting. This value is only selectable
through GPIB.
Syn t a x
CDAN:PATH:GAIN <real number> !values from 0 to 36 dB in 0.1
dB steps
CDAN:PATH:GAIN?
Scr een /field eq u iva len t
CDAN:PATH:GAIN has no equivalent field. This applies when the
CDMA standard is set to “IS-95 Only”.
Chapter 1
125
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:P NINcr em en t <r ea l n u m ber >
:P NINcr em en t?
These commands set/query the PN increment. If you know the PN
incrment, enter it with this command to speed the PN offset search. If
you do not know the increment, enter a 1.
Syn t a x
CDAN:PNIN <real number>!values from 1 to 256
CDAN:PNIN?
!returns the value of the PN increment
Scr een /field eq u iva len t
CDAN:PNIN controls the PN Incrmentfield on the CODE DOM screen
when the CDMA standard is set to “IS-95 Only”. This field is displayed
only when the Find PNfield on the PN Setupmenu is set to Auto.
:P NMod e <st r in g>
:P NMod e?
These commands set/query the PN offset mode.
•
•
‘Auto’ is used to calculate the system’s PN offset if it is unknown.
When ‘Auto’ is selected, the CDAN:PNIN command can be used to
enter a PN increment and speed the PN offset calculation.
‘Manual’ is used to enter a known PN offset. When ‘Manual’ is
selected, the PN offset is entered using the CDAN:PNOF command.
Syn t a x
CDAN:PNM ‘Auto’
‘Manual’
CDAN:PNM? !returns the PN Offset mode
Scr een /field eq u iva len t
CDAN:PNM controls the Find PNfield on the PN Setupmenu of the
CODE DOM screen, when the CDMA standard is set to “IS-95 Only”.
126
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:P NOF fset <r ea l n u m b er >
:P NOF fset?
These commands set/query the PN offset of the system.
Syn t a x
CDAN:PNOF <real number> !values from 0.0 to 511.984375
CDAN:PNOF?
!returns the value of the PN Offset
Scr een /field eq u iva len t
CDAN:PNOF controls the PN Offsetfield on the CODE DOM screen
when the CDMA standard is set to “IS-95 Only”. This field is displayed
only when the Find PNfield on the PN Setupmenu is set to Manual.
:P OWer :REF er en ce <str in g>
:P OWer :REF er en ce?
These commands set/query the power reference for the code domain
analyzer.
Syn t a x
CDAN:POW:REF ‘0 dB ref’
CDAN:POW:REF?
Scr een /field eq u iva len t
CDAN:POW:REF controls the upper subfield of the Pwr Scalefield on
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”. This field is displayed on the Markermenu.
Chapter 1
127
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:P UNit <str in g>
:P UNit?
These commands set/query whether power measurements are absolute
power measurements or relative power measurements.
•
‘Abs’ - Absolute code domain power displays the power in each of the
64 Walsh channels, relative to the total power inside a 1.23 MHz
bandwidth centered at the tune frequency. The 64 Walsh channels (0
through 63) are represented by a vertical bar on the analyzer ’s
display.
•
‘Rel’ - Relative code domain power displays the power in each of the
64 Walsh channels, relative to the pilot’s power. (Pilot power is
approximately two-thirds of the total power.) The 64 Walsh codes (0
through 63) are represented by a vertical bar on the analyzer ’s
display.
Syn t a x
CDAN:PUN ‘Abs’
‘Rel’
CDAN:PUN?
Scr een /field eq u iva len t
CDAN:PUN controls the CD pwr unitfield on the CODE DOM screen
when the CDMA standard is set to “IS-95 Only”.
:SAMP le:TIME <r ea l n u m ber >
:SAMP le:TIME?
These commands set/query the time interval for the code domain
measurements.
Syn t a x
CDAN:SAMP:TIME <real number> !values 0.00025 to 0.00125 s
CDAN:SAMP:TIME?
Scr een /field eq u iva len t
CDAN:SAMP:TIME controls the Meas Intvlfield on the Auxmenu of
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”.
128
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:SCALe:P HASe <str in g>
:SCALe:P HASe?
These commands set/query the scale that is used when measuring code
domain phase when using the code domain analyzer.
Syn t a x
CDAN:SCAL:PHAS ‘1 mRad’
‘2 mRad’
‘5 mRad’
‘10 mRad’
‘20 mRad’
‘50 mRad’
CDAN:SCAL:PHAS?
Scr een /field eq u iva len t
CDAN:SCAL:PHAS controls the Phase/divfield on the Phase
measurement menu of the CODE DOM screen when the CDMA
standard is set to “IS-95 Only”.
:SCALe:P OWer <str in g>
:SCALe:P OWer ?
These commands set/query the scale that is used when measuring code
domain power when using the code domain analyzer.
Syn t a x
CDAN:SCAL:POW ‘1 dB/div’
‘2 dB/div’
‘5 dB/div’
CDAN:SCAL:POW?
Scr een /field eq u iva len t
CDAN:SCAL:POW controls lower subfield of the Pwr Scalefield on the
Markermenu of the CODE DOM screen when the CDMA standard is
set to “IS-95 Only”. This field is displayed only when a power or fast
power measurement is selected.
Chapter 1
129
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:SCALe:TIME <str in g>
:SCALe:TIME?
These commands set/query the time per division portion of the scale
that is used when measuring code domain timing.
Syn t a x
CDAN:SCAL:TIME ‘1 ns’
‘2 ns’
‘5 ns’
‘10 ns’
‘20 ns’
‘50 ns’
CDAN:SCAL:TIME?
Scr een /field eq u iva len t
CDAN:SCAL:TIME controls the Time/divfield on the Marker menu of
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”. This field is displayed only when a timing measurement is
selected
:THRSh ld <r ea l n u m ber >
:THRSh ld ?
These commands set/query the minimum display threshold for code
domain timing and phase measurements. Walsh channels that have
power levels below the threshold are not displayed in the timing and
phase displays. Querying these measurements for Walsh channels that
are below the threshold level using GPIB will return a default value of
9e99.
Syn t a x
CDAN:THRS <real number> !values minus 30 to 0.0 dB
CDAN:THRS?
Scr een /field eq u iva len t
CDAN:THRS controls the Thresholdfield on the Auxmenu of the
CODE DOM screen when the CDMA standard is set to “IS-95 Only”.
130
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:CONTr ols <str in g>
:IS2000:CONTr ols?
These commands set/query the controls menu displayed on the Code
Domain analyzer screen when the CDMA standard is set to “IS-2000”.
Syn t a x
CDAN:IS2000:CONT ‘Main’
‘Marker’
‘Trigger’
‘Aux’
‘Gain’
‘Reference’
‘PN Setup’
‘FP Setup’
CDAN:IS2000:CONT?
Scr een /field eq u iva len t
CDAN:IS2000:CONT controls the menu Controlsfield of the CODE
DOMAIN screen when the CDMA standard is set to “IS-2000”.
Chapter 1
131
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:GAIN:MODE <str in g>
:IS2000:GAIN:MODE?
For IS-2000 only. These commands set/query the mode of the Gainfield,
allowing you to choose between an autoranging gain (‘Auto’) or a fixed
gain (‘Hold’).
This command may conflict with the CDMA analyzer ’s settings
CAN:PATH:GAIN and CAN:PATH:MODE. For example, if autoranging
is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code
Domain Analyzer (‘Auto’), the ‘Hold’ setting will always override the
‘Auto’ setting. When autoranging is turned off, setting either analyzer ’s
path gain will automatically change the other ’s to the same setting.
For average power measurements, use the CAN:POW:GAIN:MODE
command.
Syn t a x
CDAN:IS2000:GAIN:MODE ‘Auto’
‘Hold’
CDAN:IS2000:GAIN:MODE?
Scr een /field eq u iva len t
CDAN:IS2000:GAIN:MODE sets the Auto/Holdsubfield of the Gain
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
:IS2000:GAIN:PATH <r ea l n u m b er >
:IS2000:GAIN:PATH?
For IS-2000 only. These commands query/set returns the gain
information from the Code Domain analyzer. The command allows you
to fine tune the gain setting.
Syn t a x
CDAN:IS2000:GAIN:PATH <real number> !values from 0 to 36 dB
in 0.1 dB steps
CDAN:IS2000:GAIN:PATH?
Scr een /field eq u iva len t
CDAN:IS2000:GAIN:PATH has no corresponding field. This applies
when the CDMA standard is set to “IS-2000”.
132
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:GAIN[:SE TTin g] <str in g>
:IS2000:GAIN[:SE TTin g]?
For IS-2000 only. These commands set/query the gain of the Code
Domain analyzer. This command will only be enabled when
autoranging is turned off (CDAN:IS2000:GAIN:MODE ‘Hold’).
This command may conflict with the CDMA analyzer ’s settings
CAN:PATH:GAIN and CAN:PATH:MODE. For example, if autoranging
is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code
Domain Analyzer (‘Auto’), the ‘Hold’ setting will always override the
‘Auto’ setting. When autoranging is turned off, setting either analyzer ’s
gain will automatically change the other ’s to the same setting.
Use the CAN:POW:GAIN command when making an average power
measurement.
Syn t a x
CDAN:IS2000:GAIN[:SETT] ‘0 dB’
‘6 dB’
‘12 dB’
‘18 dB’
‘24 dB’
‘30 dB’
‘36 dB’
CDAN:IS2000:GAIN[:SETT]?
Scr een /field eq u iva len t
CDAN:IS2000:GAIN[:SETT] sets the lower subfield of the Gainimage
of the CODE DOMAIN screen. This subfield can only be set when the
upper subfield is set to Holdwhen the CDMA standard is set to
“IS-2000”.
Chapter 1
133
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:GAIN:VALu e?
IS-2000 only. This query returns the gain value, as a string, that is
shown in the gain field of the code domain screen. This command will
only be enabled when autoranging is turned on
(CDAN:IS2000:GAIN:MODE ‘Auto’).
Syn t a x
CDAN:IS2000:GAIN:VAL? !returns 0 dB, 6 dB, 12 dB, 18 dB,
24 dB, 30 db, 36 dB
Scr een /field eq u iva len t
CDAN:IS2000:GAIN:VAL? reads the lower subfield of the Gainimage of
the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and the upper field is set to Auto.
:IS2000:MARKer :MODE <str in g>
:IS2000:MARKer :MODE?
IS-2000 only. These commands set/query the string that matches the
field contents of the field that selects the way channel width
information is presented: In terms of Channel size or Walsh order.
Syn t a x
CDAN:IS2000:MARK:MODE <string>
CDAN:IS2000:MARK:MODE?
Scr een /field eq u iva len t
CDAN:IS2000:MARK:MODE? reads the selection field Chan
Size/Walsh Ord/Sprd Fact/Rate RC-3/Rate RC-4/Rate RC-5 in
the measurement portion of the CODE DOMAIN screen when the
CDMA standard is set to “IS-2000”.
134
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:MARKer :P OSition <in teger >
:IS2000:MARKer :P OSition ?
IS-2000 only. These commands set/query the integer that corresponds
to the current position of the marker in the CODE DOMAIN screen
when the CDMA standard is set to “IS-2000”.
Syn t a x
CDAN:IS2000:MARK:POS <integer> !values from 0 to 127
CDAN:IS2000:MARK:POS?
Scr een /field eq u iva len t
CDAN:IS2000:MARK:POS controls the Marker Posfield of the Marker
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
:IS2000:MARKer :REF er en ce <str in g>
:IS2000:MARKer :REF er en ce?
IS-2000 only. These commands set/query the power reference, as a
string, in terms of dB, for the code domain analyzer.
Syn t a x
CDAN:IS2000:MARK:REF <string>
CDAN:IS2000:MARK:REF?
Scr een /field eq u iva len t
CDAN:IS2000:MARK:REF controls the Pwr Reffield on the Marker
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
Chapter 1
135
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:MARKer :SCALe <str in g>
:IS2000:MARKer :SCALe?
IS-2000 only. These commands set/query the scale that is used when
measuring code domain power in dB/div units in the code domain
analyzer.
Syn t a x
CDAN:IS2000:MARK:SCAL ‘1 dB/div’
‘2 dB/div’
‘5 dB/div’
CDAN:IS2000:MARK:SCAL?
Scr een /field eq u iva len t
CDAN:IS2000:MARK:SCAL controls the Pwr Scalefield on the Marker
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
:IS2000:MEASu r em en t:INTer va l <r ea l n u m ber >
:IS2000:MEASu r em en t:INTer va l?
IS-2000 only. These commands set/query the real number for the time
interval of the code domain measurements performed in the IS-2000
CODE DOMAIN screen.
Syn t a x
CDAN:IS2000:MEAS:INT <real number>
!values 1.5 to 8.0 ms
CDAN:IS2000:MEAS:INT?
Scr een /field eq u iva len t
CDAN:IS2000:MEAS:INT controls the Meas Intfield of the Auximage
of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
136
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:MEASu r em en t:MODE <str in g>
:IS2000:MEASu r em en t:MODE?
IS-2000 only. These commands set/query the measurement state for the
code domain analyzer. This mode can be overridden with the
TRIG:MODE:RETR REP and TRIG:MODE:RETR SING trigger
commands. When the trigger commands are used, the state of the field
on the display are not updated. For example, the screen may show
Single selected when TRIG:MODE:RETR REP is used.
Syn t a x
CDAN:IS2000:MEAS:MODE ‘Single’
‘Cont’
CDAN:IS2000:MEAS:MODE?
Scr een /field eq u iva len t
CDAN:IS2000:MEAS:MODE controls the Single/Contsubfield of the
Measurement field of the Main image of the CODE DOMAIN screen
when the CDMA standard is set to “IS-2000”.
:IS2000:MEASu r em en t:OR Der <str in g>
:IS2000:MEASu r em en t:OR Der ?
IS-2000 only. These commands set/query the channel order of
measurement currently shown on the CODE DOMAIN screen. The
channel order can follow the Hadamard ordering in which all 128
channels are ordered consecutively from 0 to 127, or they can follow the
Bit Reverse ordering.
Syn t a x
CDAN:IS2000:MEAS:ORD ‘Bit Reverse’
‘Hadamard’
CDAN:IS2000:MEAS:ORD?
Scr een /field eq u iva len t
CDAN:IS2000:MEAS:ORD controls the Meas Orderfield of the Aux
image on the CODE DOMAIN screen when the CDMA standard is set
to “IS-2000”.
Chapter 1
137
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:MEASu r em en t[:TYP E] <str in g>
:IS2000:MEASu r em en t[:TYP E]?
IS-2000 only. These commands set/query the type of measurement
performed in the CODE DOMAIN screen.
Syn t a x
CDAN:IS2000:MEAS[:TYPE] ‘Power’
‘Fast Pwr’
‘Power&Noise’
‘Complex Pwr’
‘FstPwr Sync’
CDAN:IS2000:MEAS[:TYPE]?
Scr een /field eq u iva len t
CDAN:IS2000:MEAS[:TYPE] sets the Measurement field of the Main
image on the CODE DOMAIN screen when the CDMA standard is set
to “IS-2000”.
:IS2000:P NUMber :INCRem en t <in teger >
:IS2000:P NUMber :INCRem en t?
:IS2000:P Nu m ber :INCRem en t <in teger >
:IS2000:P Nu m ber :INCRem en t?
IS-2000 only. These commands set/query the PN increment. If you know
the PN increment, enter it with this command to speed the PN offset
search. If you do not know the increment, enter a 1.
Syn t a x
CDAN:IS2000:PNUM:INCR <integer> !values from 1 to 256
CDAN:IS2000:PNUM:INCR? !returns the value of the PN increment
CDAN:IS2000:PN:INCR <integer> !values from 1 to 256
CDAN:IS2000:PN:INCR? !returns the value of the PN increment
Scr een /field eq u iva len t
CDAN:IS2000:PNUM:INCR and CDAN:IS2000:PN:INCR control the
PN Incrmentfield on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”. This field is displayed only when the Find
PNfield on the PN Setupimage is set to Auto.
138
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:P NUMber :MODE <str in g>
:IS2000:P NUMber :MODE?
:IS2000:P Nu m ber :MODE <str in g>
:IS2000:P Nu m ber :MODE?
IS-2000 only. These commands set/query the PN setup.
•
‘Auto’ is used to calculate the system’s PN offset if it is unknown.
When ‘Auto’ is selected, the CDAN:IS2000:PNUM:INCR command
can be used to enter a PN increment and speed the PN offset
calculation.
•
‘Manual’ is used to enter a known PN offset. When ‘Manual’ is
selected, the PN offset is entered using the CDAN:IS2000:PN:OFFS
command.
Syn t a x
CDAN:IS2000:PNUM:MODE ‘Auto’
‘Manual’
CDAN:IS2000:PNUM:MODE? !returns the PN Offset mode
CDAN:IS2000:PN:MODE ‘Auto’
‘Manual’
CDAN:IS2000:PN:MODE? !returns the PN Offset mode
Scr een /field eq u iva len t
CDAN:IS2000:PNUM:MODE and CDAN:IS2000:PN:MODE control the
Find PNfield on the PN Setupimage of the CODE DOMAIN screen
when the CDMA standard is set to “IS-2000”.
Chapter 1
139
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:P NUMber :OF F Set <in teger >
:IS2000:P NUMber :OF F Set?
:IS2000:P Nu m ber :OF F set <in teger >
:IS2000:P Nu m ber :OF F set?
IS-2000 only. These commands set/query the contents of the PN offset
field in the Code Domain analyzer.
Syn t a x
CDAN:IS2000:PNUM:OFFS <integer> !values from 0 to 512
CDAN:IS2000:PNUM:OFFS? !returns the value of the PN Offset
CDAN:IS2000:PN:OFFS <integer> !values from 0 to 512
CDAN:IS2000:PN:OFFS? !returns the value of the PN Offset
Scr een /field eq u iva len t
CDAN:IS2000:PNUM:OFFS and CDAN:IS2000:PN:OFFS control the
PN Offsetfield on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”. This field is displayed only when the Find
PNfield on the PN Setupimage is set to Manual.
:IS2000:P OWer :CHANn el[:CALibr a te]
IS-2000 only. This command initiates the channel power calibration.
When this command is received, an internally generated calibration
signal is measured using the average power technique. Channel power
is also measured and a correction factor is generated. This correction
factor is applied to subsequent channel power measurements.
Calibrations should be performed whenever a new set of measurements
is made and whenever the frequency of the measured signal is changed.
Syn t a x
CDAN:IS2000:POW:CHAN[:CAL]
Scr een /field eq u iva len t
CDAN:IS2000:POW:CHAN[:CAL] controls the Chn Pwr Cal
measurement field on the Reference image of the CODE DOMAIN
screen when the CDMA standard is set to “IS-2000” and the CD pwr
unitfield is set to Abs.
140
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:P OWer :FAST:NAVG <in teger >
:IS2000:P OWer :FAST:NAVG?
IS-2000 only. These commands set/query the number of averages made
during fast power measurements.
Syn t a x
CDAN:IS2000:POW:FAST:NAVG <integer>
CDAN:IS2000:POW:FAST:NAVG?
Scr een /field eq u iva len t
CDAN:IS2000:POW:FAST:NAVG controls the Num Avgsfield of the FP
Setup menu on the CODE DOMAIN screen when the CDMA standard
is set to “IS-2000”.
:IS2000:P OWer :UNIT <str in g>
:IS2000:P OWer :UNIT?
IS-2000 only. These commands set/query whether power measurements
are absolute power measurements or relative power measurements.
•
‘Abs’ - Absolute code domain power displays the power in each of the
128 Walsh channels, relative to the total power inside a 1.23 MHz
bandwidth centered at the tune frequency.
•
‘Rel’ - Relative code domain power displays the power in each of the
128 Walsh channels, relative to the power of the Pilot signal. (Pilot
power is approximately two-thirds of the total power.)
Syn t a x
CDAN:IS2000:POW:UNIT ‘Abs’
‘Rel’
CDAN:IS2000:POW:UNIT?
Scr een /field eq u iva len t
CDAN:IS2000:POW:UNIT controls the CD pwr unitfield of the
Reference image on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
Chapter 1
141
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:THResh old <r ea l n u m b er >
:IS2000:THResh old ?
IS-2000 Only. These commands set/query the minimum display
threshold for code domain measurements. Walsh channels that have
power levels below the threshold are not displayed as active channels.
Syn t a x
CDAN:IS2000:THR <real number> !values minus 80 to 0.0 dB
CDAN:IS2000:THR? !returns the Threshold value
Scr een /field eq u iva len t
CDAN:THRS controls the Thresholdfield on the Auxmenu of the
CODE DOM screen when the CDMA standard is set to “IS-2000”.
142
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:TRIGger :ARM
IS-2000 only. This command arms code domain measurements. This
command does not affect continuous measurement and will always be
overridden by GPIB triggering commands. To effectively put the code
domain analyzer in single triggering mode, use the
TRIG:MODE:RETR SING command. For continuous triggering, use
more complete discussion of GPIB triggering.
Syn t a x
CDAN:IS2000:TRIG:ARM !arms the measurement
Scr een /field eq u iva len t
CDAN:IS2000:TRIG:ARM controls the Arm Meassubfield of the
Analyzerfield on the Mainmenu of the CODE DOMAIN screen when
the CDMA standard is set to “IS-2000”.
:IS2000:TRIGger :DARM
IS-2000 only. This command disarms the code domain measurements.
This command does not affect continuous measurement and will always
be overridden by GPIB triggering commands. To effectively put the code
domain analyzer in single triggering mode, use the
TRIG:MODE:RETR SING command. For continuous triggering, use
more complete discussion of GPIB triggering.
Syn t a x
CDAN:IS2000:TRIG:DARM !disarms measurements that have been
previously armed
Scr een /field eq u iva len t
CDAN:IS2000:TRIG:DARM controls the Disarm subfield of the
Analyzerfield on the Mainmenu of the CODE DOMAIN screen when
the CDMA standard is set to “IS-2000”.
Chapter 1
143
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:TRIGger :DELa y <r ea l n u m ber >
:IS2000:TRIGger :DELa y?
IS-2000 only. This command/query sets/returns the real number that
matches the Trig Delay field in the code domain measurements. The
contents are measured in microseconds.
Syn t a x
CDAN:IS2000:TRIG:DEL <real number> !values from 20µs to 10 s
CDAN:IS2000:TRIG:DEL?
Scr een /field eq u iva len t
CDAN:IS2000:TRIG:DEL controls the Trig Delaysubfield of the
Triggerimage when the Trig Event is set to Delay on the CODE
DOMAIN screen when the CDMA standard is set to “IS-2000”.
:IS2000:TRIGger [:EVENt] <str in g>
:IS2000:TRIGger [:EVENt]?
IS-2000 only. This command returns the string that matches the Trig
Event field in the code domain measurements.
Syn t a x
CDAN:IS2000:TRIG[:EVEN] ‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Delay’
‘Immed’
CDAN:IS2000:TRIG[:EVEN]?
Scr een /field eq u iva len t
CDAN:IS2000:TRIG[:EVEN] controls the Trig Event field of the
Trigger image of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
144
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:TRIGger :QUALifier <str in g>
:IS2000:TRIGger :QUALifier ?
IS-2000 only. This command returns the string that matches the Qual
Event field in the code domain measurements.
Syn t a x
CDAN:IS2000:TRIG:QUAL ‘None’
‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Ampl Lo’
‘Ampl Mid’
‘Ampl Hi’
‘External’
CDAN:IS2000:TRIG:QUAL?
Scr een /field eq u iva len t
CDAN:IS2000:TRIG:QUAL controls the Qual Event field of the
Trigger image of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
Chapter 1
145
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CGENerator subsystem
CGE Ner a tor su b system
:CONTr ol <str in g>
:CONTr ol?
These commands set/query the CDMA generator ’s mode. It defines the
type of data being sent.
Syn t a x
CGEN:CONT ‘Data’
‘Eb/No’
‘Noise’
CGEN:CONT?
Scr een /field eq u iva len t
CGEN:CONT controls the Gen Modefield of the CDMA GENERATOR
screen.
:DATA:SOURce <str in g>
:DATA:SOURce?
These commands set/query the type or source of the data being sent.
Syn t a x
CGEN:DATA:SOUR ‘Zeroes’
!Data is all zeroes
‘Ext’
!Data comes from the DATA IN port
!Generates random data
‘Random’
‘Data Buff’ !Gets data from the data buffer
CGEN:DATA:SOUR?
Scr een /field eq u iva len t
CGEN:DATA:SOUR controls the Data Sourcefield of the CDMA
GENERATOR screen.
146
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CGENerator subsystem
:DATA:RATE <str in g>
:DATA:RATE?
:DATA:RATE sets the data transfer rate for data from the :DATA:SOUR
command.
Syn t a x
CGEN:DATA:RATE ‘14.4 Kbps’
‘9.6 Kbps’
CGEN:DATA:RATE?
Scr een /field eq u iva len t
CGEN:DATA:RATE controls the Data Ratefield of the CDMA
GENERATOR screen.
:DIRection <str in g>
:DIRection ?
:DIR sets/queries the direction of the CDMA generator. Fwd produces
QPSK modulation to imitate a base station. Rev produces OQPSK
modulation to imitate a mobile station.
Syn t a x
CGEN:DIR ‘Fwd’
‘Rev’
CGEN:DIR?
Scr een /field eq u iva len t
CGEN:DIR controls the Gen Dirfield of the CDMA GENERATOR
screen.
Chapter 1
147
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CGENerator subsystem
:EBNO:LEVel <r ea l n u m ber >
:EBNO:LEVel?
These commands set/query the level of the generator when it is in
Syn t a x
CGEN:EBNO:LEV <real number> !values from −5 to +25 dB
CGEN:EBNO:LEV?
Scr een /field eq u iva len t
:EBNO:LEV controls the generator ’s level when the Gen Modefield on
the CDMA GENERATOR screen is set to Eb/No.
:EQF ilter <str in g>
:EQF ilter ?
These commands set/query the setting of the equalization filter used to
create forward channel signals. This command is used when you want
to override the default setting (EQ In). The filter is bypassed for reverse
link signals and cannot be overridden. Therefore, this command is valid
only when the CGEN:DIR ‘Fwd’ command is used.
Syn t a x
CGEN:EQF ‘EQ In’ !switches the Equalization filter in
‘Out’ !bypasses the Equalization filter
CGEN:EQF?
Scr een /field eq u iva len t
CGEN:EQF controls the EQ In/Outsubfield of the Gen Dirfield on the
CDMA GENERATOR screen. This field is displayed only when Fwdis
selected in the Fwd/Revsubfield.
148
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CGENerator subsystem
:EVENsec <str in g>
:EVENsec?
These commands set/query the even-second input’s setting. When
enabled, signals applied to the EVEN SECOND SYNC IN port
synchronize the Test Set’s timing circuits.
Syn t a x
CGEN:EVEN ‘Enable’
‘Not’
CGEN:EVEN?
Scr een /field eq u iva len t
CGEN:EVEN controls the Even Sec Infield of the CDMA
GENERATOR screen.
:SP ECia l <st r in g>
:SP ECia l?
These commands set/query the rotation of IQ modulated signals.
Normal creates and analyzes IQ signals with standard rotation.
Inverted creates and analyzes IQ signals with reverse-rotation.
(Reverse rotation is opposite to the direction specified in the IS-95
standards.)
Syn t a x
CGEN:SPEC ‘Normal’
‘Invert’
CGEN:SPEC?
Scr een /field eq u iva len t
CGEN:SPEC controls the Gen Specialfield of the CDMA
GENERATOR screen. This field is also displayed on the CDMA
ANALYZER screen
Chapter 1
149
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
CONF igu r e su bsystem
The CONFigure subsystem contains commands that control several
different screens: I/O CONFIGURE, INSTRUMENT CONFIGURE, and
PRINTER CONFIGURE.
:BADDr ess <in teger >
:BADDr ess?
These commands set/query the GPIB address for the Test Set. This
Syn t a x
CONF:BADD <integer> !valid from 0 to 30
CONF:BADD?
Scr een /field eq u iva len t
CONF:BADD controls the HP-IB Adrsfield of the I/O CONFIGURE
screen.
:BEEP er <st r in g>
:BEEP er ?
These commands set/query the volume of the Test Set’s beeper.
Syn t a x
CONF:BEEP ‘Off’
‘Quiet’
‘Loud’
CONF:BEEP?
Scr een /field eq u iva len t
CONF:BEEP controls the Beeperfield of the INSTRUMENT
CONFIGURE screen.
150
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:BMODe <str in g>
:BMODe?
These commands set/query the GPIB control mode.
Syn t a x
CONF:BMOD ‘Control’
‘Talk&Lstn’
CONF:BMOD?
Scr een /field eq u iva len t
CONF:BMOD controls the Modefield of the I/O CONFIGURE screen.
:CDMA:MODE <str in g>
:CDMA:MODE?
These commands set/query the standard selected in the CDMA Std field
in the INSTRUMENT CONFIGURE screen. CDMA:MODE returns
either IS-95 Only or IS-2000 depending on the current state of the field.
Syn t a x
CONF:CDMA:MODE ‘IS-95 Only’
‘IS-2000’
CONF:CDMA:MODE?
Scr een /field eq u iva len t
CDMA:MODE controls the CDMA Std field of the INSTRUMENT
CONFIGURE screen.
Chapter 1
151
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:DISP la y:MESSa ges
:DISP la y:MESSa ges?
These commands set/query the reporting of messages during normal
operation. A ‘Yes’ setting means that all messages are displayed as they
occur.
Syn t a x
CONF:DISP:MESS ‘Yes’
‘No’
CONF:DISP:MESS?
Scr een /field eq u iva len t
CONF:DISP:MESS controls the Display User Messages field of the
INSTRUMENT CONFIGURE screen.
:DATE <in teger >
:DATE?
These commands set/query the date set within the Test Set. This
Syn t a x
CONF:DATE <integer> !Use MMDDYY format
CONF:DATE?
Scr een /field eq u iva len t
CONF:DATE controls the Datefield of the INSTRUMENT
CONFIGURE screen.
:KNOB <str in g>
:KNOB?
This command is the equivalent of the pressing the cursor-control knob.
Syn t a x
CONF:KNOB ‘On’
‘Off’
CONF:KNOB?
Scr een /field eq u iva len t
CONF:KNOB has no field associated with this command.
152
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:NOTCh m od e <str in g>
:NOTCh m od e?
These commands set/query the coupling between the AF Generator 1
and a notch filter. The frequency and gain of the notch filter is set by
the AFAN:NOTC:GAIN and AFAN:NOTC:FREQ commands.
Syn t a x
CONF:NOTC ‘AFGen1’ !notch filter switched in
‘None’ !no notch filter
CONF:NOTC?
Scr een /field eq u iva len t
CONF:NOTC controls the Notch Coup lfield of the INSTRUMENT
CONFIGURE screen.
:OF Level:MODE <str in g>
:OF Level:MODE?
These commands set/query the RF level offset, and is typically used to
compensate for path loss between the Test Set and the base station.
Syn t a x
CONF:OFL:MODE ‘On’
‘Off’
CONF:OFL:MODE?
Scr een /field eq u iva len t
CONF:OFL:MODE controls the RF Level Offsetfield of the
INSTRUMENT CONFIGURE screen.
Chapter 1
153
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:OF Level:ANTen n a <r ea l n u m ber >
:OF Level:ANTen n a ?
These commands set/query the path loss from the device-under-test to
the Test Set’s ANT IN port. This correction is applied when the
CONF:OFL:MODE ‘On’ command is used.
but does not use the :STATe command.
Syn t a x
CONF:OFL:ANT <real number> !values: −100.0 to 100.0
CONF:OFL:ANT?
Scr een /field eq u iva len t
CONF:OFL:ANT controls the Antenna Infield of the INSTRUMENT
CONFIGURE screen. This value in this field is used when the RF
Level Offsetfield is set to On.
:OF Level:DUP Lex <r ea l n u m ber >
:OF Level:DUP Lex?
These commands set/query the path loss from the DUPLEX OUT
connector to the device-under-test. This correction is applied when the
CONF:OFL:MODE ‘On’ command is used.
but does not use the :STATe command.
Syn t a x
CONF:OFL:DUPL <real number> !values: −100.0 to 100.0
CONF:OFL:DUPL?
Scr een /field eq u iva len t
CONF:OFL:DUPL controls the Duplex Outfield on the INSTRUMENT
CONFIGURE screen. This value in this field is used when the RF
Level Offsetfield is set to On.
154
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:OF Level:RF INou t <r ea l n u m ber >
:OF Level:RF INou t?
These commands set/query the path loss from the RF IN/OUT
connector to the device-under-test. This correction is applied when the
CONF:OFL:MODE ‘On’ command is used.
but does not use the :STATe command.
Syn t a x
CONF:OFL:RFIN <real number> !values: minus 100.0 to 100.0
CONF:OFL:RFIN?
Scr een /field eq u iva len t
CONF:OFL:RFIN controls the RF In/Outfield of the INSTRUMENT
CONFIGURE screen. This value in this field is used when the RF
Level Offsetfield is set to On.
:OF Req u en cy <r ea l n u m ber >
:OF Req u en cy?
These commands set/query the frequency offset between the Test Set’s
generator and analyzer. This command is used only in frequency tuning
mode (CONF:RFD ‘Freq’) and RF offset must be turned on
(CONF:OMODE ‘On’).
but does not use the :STATe command.
Syn t a x
CONF:OFR <real number>
CONF:OFR?
Scr een /field eq u iva len t
CONF:OFR controls the (Gen)-(Anl)field of the INSTRUMENT
CONFIGURE screen.
Chapter 1
155
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:OMODe <str in g>
:OMODe?
These commands set/query the state of the RF offset defined in the
CONF:OFR command.
Syn t a x
CONF:OMOD ‘On’
‘Off’
CONF:OMOD?
Scr een /field eq u iva len t
CONF:OMOD controls the RF Offsetfield of the INSTRUMENT
CONFIGURE screen.
:OP ERa tion :AUTO
:OP ERa tion :HOLD
These commands control the autoranging routine in the Test Set.
:AUTO enables the routines, :HOLD disables them.
Syn t a x
CONF:OPER:AUTO !enables and autoranging
CONF:OPER:HOLD !disables and autoranging
Scr een /field eq u iva len t
CONF:OPER:AUTO and :OPER:HOLD control the Range Holdfield of
the INSTRUMENT CONFIGURE screen.
:P CMCia :CARD:STATu s?
This command queries whether or not a PC card is inserted in the Test
Set’s front-panel card slot (No Card, or Inserted).
Syn t a x
CONF:PCMC:CARD:STAT?
Scr een /F ield E q u iva len t
CONF:PCMC:CARD:STAT? queries the Card Statusfield on the I/O
CONFIGURE screen.
156
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:P CMCia :CARD:TYP E?
This command queries the type of PC card inserted in the Test Set’s
front-panel card slot (such as, RAM or ROM).
Syn t a x
CONF:PCMC:CARD:TYPE?
Scr een /F ield E q u iva len t
CONF:PCMC:CARD:TYPE? queries the Card Statusfield on the I/O
CONFIGURE screen.
:P CMCia :CARD:SIZE?
This command queries the size of the PC card inserted in the Test Set’s
front-panel card slot (such as, 1M Bytes).
Syn t a x
CONF:PCMC:CARD:SIZE?
Scr een /F ield E q u iva len t
CONF:PCMC:CARD:SIZE? queries the Card Statusfield on the I/O
CONFIGURE screen.
:P RINt:ADDRess <in teger >
:P RINt:ADDRess?
These commands set/query the printer address used when
CONF:PRIN:DEST is ‘HP-IB’.
Syn t a x
CONF:PRIN:ADDR <integer> !values 0 to 30
CONF:PRIN:ADDR?
Scr een /field eq u iva len t
CONF:PRIN:ADDR controls the Printer Adrsfield of the PRINTER
CONFIGURE screen. This field is displayed only when the Printer
Portfield is set to HP-IB.
Chapter 1
157
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:P RINt:LINes| LINE <in teger >
:P RINt:LINes| LINE?
:PRIN:LIN sets/queries the number of lines to be printed per page. This
Syn t a x
CONF:PRIN:LIN <integer> !values: 5 to 120
CONF:PRIN:LIN?
Scr een /field eq u iva len t
CONF:PRIN:LIN controls the Lines/Pagefield of the PRINTER
CONFIGURE screen.
:P RINt:DESTin a tion | P ORTs <st r in g>
:P RINt:DESTin a tion ?| P ORTs?
These commands set/query the port setting for the printer. The
:PRIN:DEST command is equivalent to the :PRIN:PORT command.
Syn t a x
CONF:PRIN:DEST ‘Serial 9’
‘Parallel 15’
‘HP-IB’
CONF:PRIN:DEST?
Scr een /field eq u iva len t
CONF:PRIN:DEST controls the Printer Portfield of the PRINTER
CONFIGURE screen.
158
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:P RINt:F F STa r t <str in g>
:P RINt:F F STa r t?
These commands set/query a form feed (blank page) at the start of
printing.
Syn t a x
CONF:PRIN:FFST ‘Yes’
‘No’
CONF:PRIN:FFST?
Scr een /field eq u iva len t
CONF:PRIN:FFST controls the FF at Startfield of the PRINTER
CONFIGURE screen.
:P RINt:F F ENd <str in g>
:P RINt:F F ENd ?
These commands set/query a form feed (blank page) at the end of
printing.
Syn t a x
CONF:PRIN:FFEN ‘Yes’
‘No’
CONF:PRIN:FFEN?
Scr een /field eq u iva len t
CONF:PRIN:FFEN controls the FF at Endfield of the PRINTER
CONFIGURE screen.
Chapter 1
159
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:P RINt:TITLe <str in g>
:P RINt:TITLe?
These commands set/query the title of the print output.
Available character set:
ABCDEFGHIJ KLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
_0123456789 !@#$%^&*()-+=<>?[]{}\ | ’;:”,./
Syn t a x
CONF:PRIN:TITL ‘<string>’ !up to 50 characters
CONF:PRIN:TITL?
Scr een /field eq u iva len t
CONF:PRIN:TITL controls the Print Titlefield of the PRINTER
CONFIGURE screen.
:P RINt:P RINter | HP Mod el| HP MO <str in g>
:P RINt:P RINter | HP Mod el| HP MO?
These commands set/query the type of printer chosen for printing.
Syn t a x
CONF:PRIN:PRIN ‘ThinkJet’
‘QuietJet’
‘PaintJet’
‘DeskJet’
‘LaserJet’
‘Epson FX-80’
‘Epson LX-850’
CONF:PRIN:PRIN?
Scr een /field eq u iva len t
CONF:PRIN:PRIN controls the Modelfield of the PRINTER
CONFIGURE screen.
160
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:REF er en ce:INP u t:EXTer n a l <str in g>
:REF er en ce:INP u t:EXTer n a l?
These commands set/query the external reference frequency. The
external reference is selected using the :REFerence:INPut:SELect
command.
Syn t a x
CONF:REF:INP:EXT ‘1 MHz’
‘2 MHz’
‘5 MHz’
‘10 MHz’
‘15 MHz’
‘1X Chip’
‘2X Chip’
‘4X Chip’
‘8X Chip’
‘16X Chip’
CONF:REF:INP:EXT?
Scr een /field eq u iva len t
CONF:REF:INP:EXT controls the Ext Ref Infield of the
INSTRUMENT CONFIGURE screen.
Chapter 1
161
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:REF er en ce:INP u t:SELect <st r in g>
:REF er en ce:INP u t:SELect?
These commands set/query the reference input selection. ‘Internal’ and
‘External’ define an internal or external reference. ‘Auto’ will switch
between external and internal inputs, based on the signal’s presence.
However, you must still set the frequency of the external reference
input (CONF:REF:INP:EXT) even though this is set to ‘Auto’. It does
not automatically select the frequency.
Syn t a x
CONF:REF:INP:SEL ‘Auto’
‘Internal’
‘External’
CONF:REF:INP:SEL?
Scr een /field eq u iva len t
CONF:REF:INP:SEL controls the Ref Selectfield of the
INSTRUMENT CONFIGURE screen.
162
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:RF CSta n d a r d <str in g>
:RF CSta n d a r d ?
These commands set/query the RF channel standard. This command is
used in conjunction with the CONF:RFD ‘Chan’ command.
Syn t a x
CONF:RFCS ‘N AMER PCS’
‘KOR PCS 0’
‘KOR PCS 1’
‘MS AMPS’
‘LS AMPS’
‘MSL NAMPS’
‘MSM NAMPS’
‘MSU NAMPS’
‘LSL NAMPS’
‘LSM NAMPS’
‘LSU NAMPS’
‘MS TACS’
‘LS TACS’
‘MS ETACS’
‘LS ETACS’
‘MS NTACS’
‘LS NTACS’
‘MS JTACS’
‘LS JTACS’
‘USER-DEF’
CONF:RFCS?
Scr een /field eq u iva len t
CONF:RFCS controls the RF Chan Stdfield of the INSTRUMENT
CONFIGURE screen. This field is displayed only when the RF Display
field is set to Chan.
Chapter 1
163
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:RF Disp la y <str in g>
:RF Disp la y?
These commands set/query the RF display mode. See the Reference
Guide for more information about frequency and channel tuning.
Syn t a x
CONF:RFD ‘Freq’ !sets RF display to frequency tuning mode
‘Chan’ !sets RF display to channel tuning mode
CONF:RFD?
Scr een /field eq u iva len t
CONF:RFD controls the RF Displayfield of the INSTRUMENT
CONFIGURE screen.
:RF IMp ed <str in g>
:RF IMp ed ?
These commands set/query the way that RF generator ’s voltages are
expressed (across a 50 ohm load or open circuit). The RF generator ’s
amplitude units must be V, mV, uV, or dBuV for this command to have
an effect.
Syn t a x
CONF:RFIM ‘50 ohm’
‘emf’
CONF:RFIM?
Scr een /field eq u iva len t
CONF:RFIM controls the RF Gen Voltsfield of the INSTRUMENT
CONFIGURE screen.
164
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:BAUD <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:BAUD?
These commands set/query the baud rate of the SERIAL 9 port.
Syn t a x
CONF:SPOR9:BAUD‘150’
‘300’
‘600‘
‘1200‘
‘2400‘
‘4800‘
‘9600‘
‘19200‘
CONF:SPOR9:BAUD?
Scr een /field eq u iva len t
CONF:SPOR9:BAUD controls the Serial Baudfield of the I/O
CONFIGURE screen.
:SP OR 9| SP ORT9| SB9| SP 9:PARity <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:PARity?
These commands set/query the parity of the SERIAL 9 port.
Syn t a x
CONF:SPOR9:PAR‘None’
‘Odd’
‘Even’
‘Always 1’
‘Always 0’
CONF:SPOR9:PAR?
Scr een /field eq u iva len t
CONF:SPOR9:PAR controls the Parityfield of the I/O CONFIGURE
screen.
Chapter 1
165
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:DATA <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:DATA?
These commands set/query the number of data bits per data word sent
over the SERIAL 9 port.
Syn t a x
CONF:SPOR9:DATA ‘7 bits’
‘8 bits’
CONF:SPOR9:DATA?
Scr een /field eq u iva len t
CONF:SPOR9:DATA controls the Data Lengthfield of the I/O
CONFIGURE screen.
:SP OR 9| SP ORT9| SB9| SP 9:STOP <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:STOP ?
These commands set/query the number of stop bits used for serial
communication over the SERIAL 9 port.
Syn t a x
CONF:SPOR9:STOP ‘1 bit’
‘2 bits’
CONF:SPOR9:STOP?
Scr een /field eq u iva len t
CONF:SPOR9:STOP controls the Stop Lengthfield of the I/O
CONFIGURE screen.
166
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:F CONtr ol| F LOW <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:F CONtr ol| F LOW?
These commands set/query the flow control to set the pace of serial
communications for the SERIAL 9 port.
Syn t a x
CONF:SPOR9:FCON ‘Xon/Xoff’
‘None’
CONF:SPOR9:FCON?
Scr een /field eq u iva len t
CONF:SPOR9:FCON controls the Flow Controlfield of the
I/O CONFIGURE screen.
:SP OR 9| SP ORT9| SB9| SP 9:IBE Ch o <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:IBE Ch o?
These commands set/query the screen and error message echoing from
IBASIC.
Syn t a x
CONF:SPOR9:IBEC ‘On’
‘Off’
CONF:SPOR9:IBEC?
Scr een /field eq u iva len t
CONF:SPOR9:IBEC controls the IBASIC Echofield of the I/O
CONFIGURE screen.
Chapter 1
167
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:IECHo <str in g>
:SP OR 9| SP ORT9| SB9| SP 9:IECHo?
These commands set/query the character and screen echoing
(instrument echo) when using an external ASCII RS-232 terminal or
computer to enter or edit the IBASIC program.
Syn t a x
CONF:SPOR9:IECH ‘On’
‘Off’
CONF:SPOR9:IECH?
Scr een /field eq u iva len t
CONF:SPOR9:IECH controls the Inst Echofield of the I/O
CONFIGURE screen.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :MODE <st r in g>
:SP OR 9| SP ORT9| SB9| SP 9:MODem :MODE?
These commands set/query the modem mode.
Syn t a x
CONF:SPOR9:MOD:MODE ‘Disable’
‘Ignore’
‘Answer’
‘Dial Back’
CONF:SPOR9:MOD:MODE? <returns quoted string>
Scr een /field eq u iva len t
CONF:SPOR9:MOD:MODE controls the Modem Modefield of the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CALL:ORIGin a te
This command causes the modem to place a call using the dialing string
entered with the CONF:SPOR9:MOD:CONN:NUMB command.
Syn t a x
CONF:SPOR9:MOD:CALL:ORIG
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CALL:ORIG controls the Orignatesubfield of the
Callfield on the MODEM CONFIGURE screen when the Serial Port
field is set to Port 9.
168
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CALL:DISCon n ect
This command causes the modem to disconnect from the call in
progress. It also cancels any pending call origination retries
(CONF:SPOR9:MOD:CONN:RETRy). This field is inactive when
CONF:SPOR9:MOD:MODE ‘Disable’ command is used.
Syn t a x
CONF:SPOR9:MOD:CALL:DISC
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CALL:DISC controls the Disconnectsubfield of
the Callfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CALL:STATu s?
This command queries the status of the modem.
Syn t a x
CONF:SPOR9:MOD:CALL:STAT?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CALL:STAT? queries the Statusfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:NUMBer
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:NUMBer ?
This command queries the status of the modem.
Syn t a x
CONF:SPOR9:MOD:CONN:NUMB <string up to 40 characters>
CONF:SPOR9:MOD:CONN:NUMB?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONN:NUMB controls the Number to Callfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 9.
Chapter 1
169
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:TIMeou t
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:TIMeou t?
This command sets/queries the number of seconds to wait before
aborting a connection attempt. This applies to both answer and
originate activities.
Syn t a x
CONF:SPOR9:MOD:CONN:TIM <integer>
CONF:SPOR9:MOD:CONN:TIM?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONN:TIM controls the Connection Time-out
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:HDE La y
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:HDE La y?
This command sets/queries the number of seconds to wait before
attempting an origination. This applies to the delay prior to attempting
a dialback as well as the delay prior to retrying an origination as part of
the retry sequence.
Syn t a x
CONF:SPOR9:MOD:CONN:HDEL <integer>
CONF:SPOR9:MOD:CONN:HDEL?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONN:HDEL controls the Hold-off Delayfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 9.
170
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:RE TRy
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONNect:RE TRy?
This command sets/queries the number of calls that will be tried before
an origination attempt is terminated. The total number of tries will be
the number entered in this field, plus one for the original attempt.
Syn t a x
CONF:SPOR9:MOD:CONN:RETR <integer>
CONF:SPOR9:MOD:CONN:RETR?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONN:RETR controls the Retriesfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:UP Da te
This command is used to send the modem configuration strings entered
in the CONF:SPOR9:MOD:CONF:STR1, STR2, and STR3 commands.
Syn t a x
CONF:SPOR9:MOD:CONF:UPD
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONF:UPD controls the Modem Configuration
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 9.
Chapter 1
171
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g1
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g1?
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g2
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g2?
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g3
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:STRin g3?
These commands are used to enter the modem configuration strings to
be sent when the CONF:SPOR9:MOD:CONF:UPD command is
executed. Each string has a maximum of 40 characters.
STR 1 is the initial configuration string sent to the modem when the
CONF:SPOR9:MOD:CONF:UPD command is executed. The second line
is the second string sent, and the third line is the third string sent. The
second and third lines can be left blank.
Syn t a x
CONF:SPOR9:MOD:CONF:STR1 <string>
CONF:SPOR9:MOD:CONF:STR1?
CONF:SPOR9:MOD:CONF:STR2 <string>
CONF:SPOR9:MOD:CONF:STR2?
CONF:SPOR9:MOD:CONF:STR3 <string>
CONF:SPOR9:MOD:CONF:STR3?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONF:STR1 controls the first line of the Modem
Initialization/Configurationfield on the MODEM CONFIGURE
screen when the Serial Portfield is set to Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:ECHa r a ct er
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:ECHa r a ct er ?
This command sets/queries a one-character, non-printable escape
character that you use to define your own escape command sequence.
Syn t a x
CONF:SPOR9:MOD:CONF:ECH <character>
CONF:SPOR9:MOD:CONF:ECH?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONF:ECH controls the Command Escape
Characterfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 9.
172
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :CONF igu r e:E CEQiva len t?
This command reports the decimal equivalent of the escape character
entered with the CONF:SPOR9:MOD:CONF:ECH.
Syn t a x
CONF:SPOR9:MOD:CONF:ECEQ?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:CONF:ECEQ? queries the Decimal Equivalent
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:MODem :SECu r ity:STATe
:SP OR 9| SP ORT9| SB9| SP 9:MODem :SECu r ity:STATe?
This command controls the usage of a password security challenge.
•
•
‘Off’ - no password challenge on connection
‘On’ - issues a password challenge on connection. The caller must
enter a password. The password must match the string entered in
the CONF:SPOR9:MOD:SEC:PASS command.
Syn t a x
CONF:SPOR9:MOD:SEC:STAT ‘On’
‘Off’
CONF:SPOR9:MOD:CONF:STAT?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:SEC:STAT controls the Incoming Call Security
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 9.
Chapter 1
173
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:MODem :SECu r ity:PASSw or d
:SP OR 9| SP ORT9| SB9| SP 9:MODem :SECu r ity:PASSw or d ?
This command sets/queries the password required by a security
challenge when the CONF:SPOR9:MOD:SEC:STAT ‘On’ command is
used.
Syn t a x
CONF:SPOR9:MOD:SEC:PASS <string>
CONF:SPOR9:MOD:SEC:PASS?
Scr een /field eq u iva len t
CONF:SPOR9:MOD:SEC:PASS controls the Psswordfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 9.
:SP OR 9| SP ORT9| SB9| SP 9:SIN| SINP <st r in g>
:SP OR 9| SP ORT9| SB9| SP 9:SIN| SINP ?
These commands set/query the destination of data characters received
by the Test Set via the SERIAL 9 port.
Syn t a x
CONF:SPOR9:SIN ‘Inst’
‘IBASIC’
CONF:SPOR9:SIN?
Scr een /field eq u iva len t
CONF:SPOR9:SIN controls the Serial_9 Infield of the I/O
CONFIGURE screen.
:SP OR 9| SP ORT9| SB9| SP 9:STATu s:LINE?
This command queries the line status register.
Syn t a x
CONF:SPOR9:STAT:LINE?
Scr een /field eq u iva len t
No screen/field equivalent.
174
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 9| SP ORT9| SB9| SP 9:STATu s:MODem ?
This command queries the modem status register.
Syn t a x
CONF:SPOR9:STAT:MOD?
Scr een /field eq u iva len t
No screen/field equivalent.
:SP OR 10| SP ORT10| SB10| SP 10:BAUD <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:BAUD?
These commands set/query the baud rate of the SERIAL 10 port.
Syn t a x
CONF:SPOR10:BAUD ‘150’
‘300’
‘600’
‘1200’
‘2400’
‘4800’
‘9600’
‘19200’
CONF:SPOR10:BAUD?
Scr een /field eq u iva len t
CONF:SPOR10:BAUD controls the Serial Baudfield of the I/O
CONFIGURE screen.
:SP OR 10| SP ORT10| SB10| SP 10:PARity <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:PARity?
These commands set/query the parity of the SERIAL 10 port.
Syn t a x
CONF:SPOR10:PAR ‘None’
‘Odd’
‘Even’
‘Always 1’
‘Always 0’
CONF:SPOR10:PAR?
Scr een /field eq u iva len t
CONF:SPOR10:PAR controls the Parityfield of the I/O CONFIGURE
screen.
Chapter 1
175
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:DATA <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:DATA?
These commands set/query the number of data bits per data word sent
over the SERIAL 10 port.
Syn t a x
CONF:SPOR10:DATA ‘7 bits’
‘8 bits’
CONF:SPOR10:DATA?
Scr een /field eq u iva len t
CONF:SPOR10:DATA controls the Data Lengthfield of the I/O
CONFIGURE screen.
:SP OR 10| SP ORT10| SB10| SP 10:STOP <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:STOP ?
These commands set/query the number of stop bits used for serial
communication over the SERIAL 10 port.
Syn t a x
CONF:SPOR10:STOP ‘1 bit’
‘2 bits’
CONF:SPOR10:STOP?
Scr een /field eq u iva len t
CONF:SPOR10:STOP controls the Stop Lengthfield of the I/O
CONFIGURE screen.
176
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:F CONtr ol| F LOW <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:F CONtr ol| F LOW?
These commands set/query the flow control to set the pace of serial
communications for the SERIAL 10 port.
Syn t a x
CONF:SPOR10:FCON ‘Xon/Xoff’
‘None’
CONF:SPOR10:FCON?
Scr een /field eq u iva len t
CONF:SPOR10:FCON controls the Flow Controlfield of the I/O
CONFIGURE screen.
:SP OR 10| SP ORT10| SB10| SP 10:STATu s:LINE?
This command queries the line status register.
Syn t a x
CONF:SPOR10:STAT:LINE?
Scr een /field eq u iva len t
No screen/field equivalent.
:SP OR 10| SP ORT10| SB10| SP 10:STATu s:MODem ?
This command queries the modem status register.
Syn t a x
CONF:SPOR10:STAT:MOD?
Scr een /field eq u iva len t
No screen/field equivalent.
Chapter 1
177
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :MODE <str in g>
:SP OR 10| SP ORT10| SB10| SP 10:MODem :MODE?
These commands set/query the modem mode.
Syn t a x
CONF:SPOR10:MOD:MODE ‘Disable’
‘Ignore’
‘Answer’
‘Dial Back’
CONF:SPOR10:MOD:MODE? !returns quoted string
Scr een /field eq u iva len t
CONF:SPOR10:MOD:MODE controls the Modem Modefield of the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CALL:OR IGin a te
This command causes the modem to place a call using the dialing string
entered with the CONF:SPOR10:MOD:CONN:NUMB command.
Syn t a x
CONF:SPOR10:MOD:CALL:ORIG
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CALL:ORIG controls the Orignatesubfield of
the Callfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CALL:DISCon n ect
This command causes the modem to disconnect from the call in
progress. It also cancels any pending call origination retries
(CONF:SPOR10:MOD:CONN:RETRy). This field is inactive when
CONF:SPOR10:MOD:MODE ‘Disable’ command is used.
Syn t a x
CONF:SPOR10:MOD:CALL:DISC
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CALL:DISC controls the Disconnectsubfield of
the Callfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 10.
178
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CALL:STATu s?
This command queries the status of the modem.
Syn t a x
CONF:SPOR10:MOD:CALL:STAT?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CALL:STAT? queries the Statusfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :NUMBer
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :NUMBer ?
This command queries the status of the modem.
Syn t a x
CONF:SPOR10:MOD:CONN:NUMB <string up to 40 characters>
CONF:SPOR10:MOD:CONN:NUMB?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONN:NUMB controls the Number to Callfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :TIMeou t
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :TIMeou t?
This command sets/queries the number of seconds to wait before
aborting a connection attempt. This applies to both answer and
originate activities.
Syn t a x
CONF:SPOR10:MOD:CONN:TIM <integer>
CONF:SPOR10:MOD:CONN:TIM?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONN:TIM controls the Connection Time-out
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 10.
Chapter 1
179
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :HDELa y
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :HDELa y?
This command sets/queries the number of seconds to wait before
attempting an origination. This applies to the delay prior to attempting
a dialback as well as the delay prior to retrying an origination as part of
the retry sequence.
Syn t a x
CONF:SPOR10:MOD:CONN:HDEL <integer>
CONF:SPOR10:MOD:CONN:HDEL?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONN:HDEL controls the Hold-off Delayfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :RETRy
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONNect :RETRy?
This command sets/queries the number of calls that will be tried before
an origination attempt is terminated. The total number of tries will be
the number entered in this field, plus one for the original attempt.
Syn t a x
CONF:SPOR10:MOD:CONN:RETR <integer>
CONF:SPOR10:MOD:CONN:RETR?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONN:RETR controls the Retriesfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:UP Da te
This command is used to send the modem configuration strings entered
in the CONF:SPOR10:MOD:CONF:STR1, STR2, and STR3 commands.
Syn t a x
CONF:SPOR10:MOD:CONF:UPD
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONF:UPD controls the Modem Configuration
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 10.
180
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g1
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g1?
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g2
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g2?
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g3
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:STRin g3?
These commands are used to enter the modem configuration strings to
be sent when the CONF:SPOR10:MOD:CONF:UPD command is
executed. Each string has a maximum of 40 characters.
STR 1 is the initial configuration string sent to the modem when the
CONF:SPOR10:MOD:CONF:UPD command is executed. The second
line is the second string sent, and the third line is the third string sent.
The second and third lines can be left blank
Syn t a x
CONF:SPOR10:MOD:CONF:STR1 <string>
CONF:SPOR10:MOD:CONF:STR1?
CONF:SPOR10:MOD:CONF:STR2 <string>
CONF:SPOR10:MOD:CONF:STR2?
CONF:SPOR10:MOD:CONF:STR3 <string>
CONF:SPOR10:MOD:CONF:STR3?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONF:STR1 controls the first line of the Modem
Initialization/Configurationfield on the MODEM CONFIGURE
screen when the Serial Portfield is set to Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:ECHa r a cter
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:ECHa r a cter ?
This command sets/queries a one-character, non-printable escape
character that you use to define your own escape command sequence.
Syn t a x
CONF:SPOR10:MOD:CONF:ECH <character>
CONF:SPOR10:MOD:CONF:ECH?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONF:ECH controls the Command Escape
Characterfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 10.
Chapter 1
181
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :CONF igu r e:ECEQiva len t?
This command reports the decimal equivalent of the escape character
entered with the CONF:SPOR10:MOD:CONF:ECH.
Syn t a x
CONF:SPOR10:MOD:CONF:ECEQ?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:CONF:ECEQ? queries the Decimal Equivalent
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 10.
:SP OR 10| SP ORT10| SB10| SP 10:MODem :SECu r it y:STATe
:SP OR 10| SP ORT10| SB10| SP 10:MODem :SECu r it y:STATe?
This command controls the usage of a password security challenge.
•
•
‘Off’ - no password challenge on connection
‘On’ - issues a password challenge on connection. The caller must
enter a password. The password must match the string entered in
the CONF:SPOR10:MOD:SEC:PASS command.
Syn t a x
CONF:SPOR10:MOD:SEC:STAT ‘On’
‘Off’
CONF:SPOR10:MOD:CONF:STAT?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:SEC:STAT controls the Incoming Call
Securityfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 10.
182
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 10| SP ORT10| SB10| SP 10:MODem :SECu r it y:PASSw or d
:SP OR 10| SP ORT10| SB10| SP 10:MODem :SECu r it y:PASSw or d ?
This command sets/queries the password required by a security
challenge when the CONF:SPOR10:MOD:SEC:STAT ‘On’ command is
used.
Syn t a x
CONF:SPOR10:MOD:SEC:PASS <string>
CONF:SPOR10:MOD:SEC:PASS?
Scr een /field eq u iva len t
CONF:SPOR10:MOD:SEC:PASS controls the Psswordfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 10.
:SP OR 11| SP ORT11| SB11| SP 11:BAUD <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:BAUD?
These commands set/query the baud rate of the SERIAL 11 port.
Syn t a x
CONF:SPOR11:BAUD ‘150’
‘300’
‘600’
‘1200’
‘2400’
‘4800’
‘9600’
‘19200’
CONF:SPOR11:BAUD?
Scr een /field eq u iva len t
CONF:SPOR11:BAUD controls the Serial Baudfield of the I/O
CONFIGURE screen.
Chapter 1
183
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:PARit y <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:PARit y?
These commands set/query the parity of the SERIAL 11 port.
Syn t a x
CONF:SPOR11:PAR
‘None’
‘Odd’
‘Even’
‘Always 1’
‘Always 0’
CONF:SPOR11:PAR?
Scr een /field eq u iva len t
CONF:SPOR11:PAR controls the Parityfield of the I/O CONFIGURE
screen.
:SP OR 11| SP ORT11| SB11| SP 11:DATA <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:DATA?
These commands set/query the number of data bits per data word sent
over the SERIAL 11 port.
Syn t a x
CONF:SPOR11:DATA ‘7 bits’
‘8 bits’
CONF:SPOR11:DATA?
Scr een /field eq u iva len t
CONF:SPOR11:DATA controls the Data Lengthfield of the I/O
CONFIGURE screen.
184
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:STOP <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:STOP ?
These commands set/query the number of stop bits used for serial
communication over the SERIAL 11 port.
Syn t a x
CONF:SPOR11:STOP ‘1 bit’
‘2 bits’
CONF:SPOR11:STOP?
Scr een /field eq u iva len t
CONF:SPOR11:STOP controls the Stop Lengthfield of the I/O
CONFIGURE screen.
:SP OR 11| SP ORT11| SB11| SP 11:F CONtr ol| F LOW <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:F CONtr ol| F LOW?
These commands set/query the flow control to set the pace of serial
communications for the SERIAL 11 port.
Syn t a x
CONF:SPOR11:FCON ‘Xon/Xoff’
‘None’
CONF:SPOR11:FCON?
Scr een /field eq u iva len t
CONF:SPOR11:FCON controls the Flow Controlfield of the I/O
CONFIGURE screen.
:SP OR 11| SP ORT11| SB11| SP 11:STATu s:LINE?
This command queries the line status register.
Syn t a x
CONF:SPOR11:STAT:LINE?
Scr een /field eq u iva len t
No screen/field equivalent.
Chapter 1
185
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:STATu s:MODem ?
This command queries the modem status register.
Syn t a x
CONF:SPOR11:STAT:MOD?
Scr een /field eq u iva len t
No screen/field equivalent.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :MODE <str in g>
:SP OR 11| SP ORT11| SB11| SP 11:MODem :MODE?
These commands set/query the modem mode.
Syn t a x
CONF:SPOR11:MOD:MODE ‘Disable’
‘Ignore’
‘Answer’
‘Dial Back’
CONF:SPOR11:MOD:MODE? <returns quoted string>
Scr een /field eq u iva len t
CONF:SPOR11:MOD:MODE controls the Modem Modefield of the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CALL:ORIGin a te
This command causes the modem to place a call using the dialing string
entered with the CONF:SPOR11:MOD:CONN:NUMB command.
Syn t a x
CONF:SPOR11:MOD:CALL:ORIG
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CALL:ORIG controls the Orignatesubfield of
the Callfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 11.
186
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CALL:DISCon n ect
This command causes the modem to disconnect from the call in
progress. It also cancels any pending call origination retries
(CONF:SPOR11:MOD:CONN:RETRy). This field is inactive when
CONF:SPOR11:MOD:MODE ‘Disable’ command is used.
Syn t a x
CONF:SPOR11:MOD:CALL:DISC
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CALL:DISC controls the Disconnectsubfield of
the Callfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CALL:STATu s?
This command queries the status of the modem.
Syn t a x
CONF:SPOR11:MOD:CALL:STAT?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CALL:STAT? queries the Statusfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:NUMBer
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:NUMBer ?
This command queries the status of the modem.
Syn t a x
CONF:SPOR11:MOD:CONN:NUMB <string up to 40 characters>
CONF:SPOR11:MOD:CONN:NUMB?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONN:NUMB controls the Number to Callfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 11.
Chapter 1
187
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:TIMeou t
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:TIMeou t?
This command sets/queries the number of seconds to wait before
aborting a connection attempt. This applies to both answer and
originate activities.
Syn t a x
CONF:SPOR11:MOD:CONN:TIM <integer>
CONF:SPOR11:MOD:CONN:TIM?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONN:TIM controls the Connection Time-out
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:HDELa y
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:HDELa y?
This command sets/queries the number of seconds to wait before
attempting an origination. This applies to the delay prior to attempting
a dialback as well as the delay prior to retrying an origination as part of
the retry sequence.
Syn t a x
CONF:SPOR11:MOD:CONN:HDEL <integer>
CONF:SPOR11:MOD:CONN:HDEL?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONN:HDEL controls the Hold-off Delayfield
on the MODEM CONFIGURE screen when the Serial Portfield is set
to Port 11.
188
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:RETRy
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONNect:RETRy?
This command sets/queries the number of calls that will be tried before
an origination attempt is terminated. The total number of tries will be
the number entered in this field, plus one for the original attempt.
Syn t a x
CONF:SPOR11:MOD:CONN:RETR <integer>
CONF:SPOR11:MOD:CONN:RETR?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONN:RETR controls the Retriesfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:UP Da te
This command is used to send the modem configuration strings entered
in the CONF:SPOR11:MOD:CONF:STR1, STR2, and STR3 commands.
Syn t a x
CONF:SPOR11:MOD:CONF:UPD
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONF:UPD controls the Modem Configuration
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 11.
Chapter 1
189
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g1
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g1?
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g2
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g2?
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g3
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:STR in g3?
These commands are used to enter the modem configuration strings to
be sent when the CONF:SPOR11:MOD:CONF:UPD command is
executed. Each string has a maximum of 40 characters.
STR 1 is the initial configuration string sent to the modem when the
CONF:SPOR11:MOD:CONF:UPD command is executed. The second
line is the second string sent, and the third line is the third string sent.
The second and third lines can be left blank.
Syn t a x
CONF:SPOR11:MOD:CONF:STR1 <string>
CONF:SPOR11:MOD:CONF:STR1?
CONF:SPOR11:MOD:CONF:STR2 <string>
CONF:SPOR11:MOD:CONF:STR2?
CONF:SPOR11:MOD:CONF:STR3 <string>
CONF:SPOR11:MOD:CONF:STR3?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONF:STR1 controls the first line of the Modem
Initialization/Configurationfield on the MODEM CONFIGURE
screen when the Serial Portfield is set to Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:ECHa r a cter
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:ECHa r a cter ?
This command sets/queries a one-character, non-printable escape
character that you use to define your own escape command sequence.
Syn t a x
CONF:SPOR11:MOD:CONF:ECH <character>
CONF:SPOR11:MOD:CONF:ECH?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONF:ECH controls the Command Escape
Characterfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 11.
190
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :CONF igu r e:ECEQiva len t?
This command reports the decimal equivalent of the escape character
entered with the CONF:SPOR11:MOD:CONF:ECH.
Syn t a x
CONF:SPOR11:MOD:CONF:ECEQ?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:CONF:ECEQ? queries the Decimal Equivalent
field on the MODEM CONFIGURE screen when the Serial Portfield
is set to Port 11.
:SP OR 11| SP ORT11| SB11| SP 11:MODem :SECu r ity:STATe
:SP OR 11| SP ORT11| SB11| SP 11:MODem :SECu r ity:STATe?
This command controls the usage of a password security challenge.
•
•
‘Off’ - no password challenge on connection
‘On’ - issues a password challenge on connection. The caller must
enter a password. The password must match the string entered in
the CONF:SPOR11:MOD:SEC:PASS command.
Syn t a x
CONF:SPOR11:MOD:SEC:STAT ‘On’
‘Off’
CONF:SPOR11:MOD:CONF:STAT?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:SEC:STAT controls the Incoming Call
Securityfield on the MODEM CONFIGURE screen when the Serial
Portfield is set to Port 11.
Chapter 1
191
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SP OR 11| SP ORT11| SB11| SP 11:MODem :SECu r ity:PASSw or d
:SP OR 11| SP ORT11| SB11| SP 11:MODem :SECu r ity:PASSw or d ?
This command sets/queries the password required by a security
challenge when the CONF:SPOR11:MOD:SEC:STAT ‘On’ command is
used.
Syn t a x
CONF:SPOR11:MOD:SEC:PASS <string>
CONF:SPOR11:MOD:SEC:PASS?
Scr een /field eq u iva len t
CONF:SPOR11:MOD:SEC:PASS controls the Psswordfield on the
MODEM CONFIGURE screen when the Serial Portfield is set to
Port 11.
:SP Select <str in g>
:SP Select?
These commands set/query the selected serial port for configuration
purposes. It defines which port’s configuration settings are displayed on
the I/O CONFIGURE screen.
Syn t a x
CONF:SPS ‘Serial 9’
‘Serial 10’
‘Serial 11’
CONF:SPS?
Scr een /field eq u iva len t
CONF:SPS controls the Serial Portfield of the I/O CONFIGURE
screen.
192
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
CONFigure subsystem
:SRLoca tion <str in g>
:SRLoca tion ?
These commands set/query the save and recall locations.
Syn t a x
CONF:SRL ‘INTERNAL’
‘CARD’
‘RAM’
CONF:SRL?
Scr een /field eq u iva len t
CONF:SRL controls the Save/Recallfield of the I/O CONFIGURE
screen.
:TIME <r ea l n u m ber >
:TIME?
These commands set/query the Test Set’s time-of-day clock (hh.mm).
The clock uses the 24-hour format. For example 1:30 pm is 13.30.
but does not use the :STAT, :DUN, :INCR, or :UNITs command.
Syn t a x
CONF:TIME <real number> !hh.mm where hh is hours, mm is
minutes
CONF:TIME?
Scr een /field eq u iva len t
CONF:TIME controls the Timefield of the INSTRUMENT
CONFIGURE screen.
Chapter 1
193
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
DECod er su bsystem
:ARM:MODE <str in g>
:ARM:MODE?
These commands set/query the measurement arming mode. This
command specifies how long you want the analyzer to decode incoming
signals.
•
‘Single’ tells the analyzer to display the information received during
one gate time. Measurements are triggered using the
DGAN:TRIG:ARM and retriggered using the same command. To
disarm the measurement, use the DEC:STOP command.
•
‘Cont’ is used to automatically re-arm the analyzer and display the
measurements continuously until the DEC:ARM:MODE ‘Single’
command is sent. Each measurement is overwritten by subsequent
measurements.
Syn t a x
DEC:ARM:MODE ‘Single’
‘Cont’
DEC:ARM:MODE?
Scr een /field eq u iva len t
DEC:ARM:MODE controls the Single/Contfield on the SIGNALING
DECODER screens.
194
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:LEVel:AM <r ea l n u m ber >
:LEVel:AM?
These commands set/query the expected data signal level (after
de-emphasis, if used). For more information about the effects of
de-emphasis, see the “De-emphasis and Input Level” description in the
Reference Guide.
The higher the level of signal expected by the analyzer, the higher the
trigger level is set. The input level should be set high enough to prevent
false triggering, but low enough to allow triggering for valid signals.
This may require you to set the input level well below the expected level.
This command requires one of the following settings for the AF
analyzer ’s input (AFAN:INP), ‘AM Mod’ or ‘AM Demod’.
but does not use the :STATe command.
Syn t a x
DEC:LEV:AM <real number>
DEC:LEV:AM?
Scr een /field eq u iva len t
DEC:LEV:AM controls the Input Levelfield on the SIGNALING
DECODER screen when the AF Anl Infield is set to AM Modor AM
Demod.
Chapter 1
195
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:LEVel:F M <r ea l n u m ber >
:LEVel:F M?
These commands set/query the expected data signal level (after
de-emphasis, if used). For more information about the effects of
de-emphasis, see the “De-emphasis and Input Level” in the Reference
Guide.
The higher the level of signal expected by the analyzer, the higher the
trigger level is set.The input level should be set high enough to prevent
false triggering, but low enough to allow triggering for valid signals.
This may require you to set the input level well below the expected level.
This command requires one of the following settings for the AF
analyzer ’s input (AFAN:INP), ‘FM Mod’ or ‘FM Demod’.
but does not use the :STATe command.
Syn t a x
DEC:LEV:FM <real number>
DEC:LEV:FM?
Scr een /field eq u iva len t
DEC:LEV:FM controls the Input Levelfield on the SIGNALING
DECODER screen when the AF Anl Infield is set to FM Modor FM
Demod.
196
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:LEVel:VOLTs <r ea l n u m ber >
:LEVel:VOLTs?
These commands set/query the expected data signal level (after
de-emphasis, if used). For more information about the effects of
de-emphasis, see the “De-emphasis and Input Level” in the Reference
Guide.
The higher the level of signal expected by the analyzer, the higher the
trigger level is set. The input level should be set high enough to prevent
false triggering, but low enough to allow triggering for valid signals.
This may require you to set the input level well below the expected level.
This command requires one of the following settings for the AF
analyzer ’s input (AFAN:INP), ‘Audio In’, ‘Audio Out’, ‘Ext Mod’ or ‘SSB
Demod’.
but does not use the :STATe command.
Syn t a x
DEC:LEV:VOLT <real number>
DEC:LEV:VOLT?
Scr een /field eq u iva len t
DEC:LEV:VOLT controls the Input Levelfield on the SIGNALING
DECODER screen when the AF Anl Infield is set to Audio In, Audio
Out, Ext Mod, or SSB Demod.
:MODE <str in g>
:MODE?
These commands set/query the mode of the signaling decoder.
Syn t a x
DEC:MODE ‘Func Gen’
‘DTMF’
‘AMPS-TACS’
‘NAMP-NTAC’
DEC:MODE?
Scr een /field eq u iva len t
DEC:MODE controls the Modefield on the SIGNALING DECODER
screen.
Chapter 1
197
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:P OLa r ity <str in g>
:P OLa r ity?
These commands match/query the polarity of the encoded signal being
analyzed. This function is helpful for restoring the proper data polarity
when the transmitter, repeater, or receiver in you communications
system has an odd number of inversions. These inversions cause the
received data to be inverted when decoded.
•
When DEC:POL ‘Norm’ is used, a logical high (1) is displayed when a
positive peak in the received signal is detected. A negative peak
displays a logical low (0).
•
When DEC:POL ‘Invert’ is used, a logical low (0) is displayed when a
positive peak in the received signal is detected. A negative peak
displays a logical high (1).
Inverting amplifiers used in transmitters, receivers, and repeaters can
cause an inversion of the modulating digital data. If the decoded signal
does not display the expected results, change the polarity to see if the
signal is being inverted before it is decoded.
Syn t a x
DEC:POL ‘Norm’
‘Invert’
DEC:POL?
Scr een /field eq u iva len t
DEC:POL controls the Polarityfield on the SIGNALING DECODER
screen when the Modefield is set to AMPS-TACSor NAMP-NTAC.
:STOP
This command is used to disarm the decoder when you are making
single measurements (DEC:ARM:MODE ‘Single’). It is not used with
continuous measurements.
Syn t a x
DEC:STOP
Scr een /field eq u iva len t
DEC:STOP controls the Stop Measfield on the SIGNALING
DECODER screens.
198
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:AMP S| TACS:GATE <r ea l n u m ber >
:AMP S| TACS:GATE?
This command specifies how long the decoder analyzes a signal after it
has been triggered. Up to 6.55 seconds of gate time can be specified. The
minimum gate time must be long enough to allow the preamble and all
necessary data bits to be captured.
If the gate time is too long, the decoder ’s buffer becomes full. A message
is displayed instructing you to decrease the gate time.
but does not use the :STATe command.
Syn t a x
DEC:AMPS:GATE <real number>
DEC:AMPS:GATE?
Scr een /field eq u iva len t
DEC:AMPS:GATE controls the Gate Timefield on the SIGNALING
DECODER screen when the Modefield is set to AMPS-TACS.
:AMP S| TACS:MESSa ge <str in g>
:AMP S| TACS:MESSa ge?
These commands set/query which of the message streams (entered in
the encoder ’s message fields) will be decoded.
Syn t a x
DEC:AMPS:MESS ‘FOCC A&B’
‘FOCC A’
‘FOCC B’
‘RECC’
‘FVC’
‘RVC’
DEC:AMPS:MESS?
Scr een /field eq u iva len t
DEC:AMPS:MESS has no equivalent screen control field.
Chapter 1
199
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:AMP S| TACS:STANd a r d <str in g>
:AMP S| TACS:STANd a r d ?
These commands set/query the expected frame structure and channel
range of the decoder ’s incoming signal. Trying to run a test with the
wrong standard selected will result in incorrectly decoded data, or will
result in a displayed error message.
Syn t a x
DEC:AMPS:STAN ‘AMPS’
‘TACS’
‘JTACS’
DEC:AMPS:STAN?
Scr een /field eq u iva len t
DEC:AMPS:STAN controls the Standardfield on the SIGNALING
DECODER screen when the Modefield is set to AMPS-TACS.
:AMP S| TACS:TRIGger :PATTer n <str in g>
:AMP S| TACS:TRIGger :PATTer n ?
These commands set/query the bit pattern to filter displayed
information. The decoder only displays the received data when this
binary pattern is encountered immediately after triggering. This is
helpful when you only want to display messages containing very
specific information.
The trigger pattern is entered as a sequence of ones, zeros, and dots. A
dot will cause the decoder to trigger for either a one or a zero in that bit
position in the received data stream.
Syn t a x
DEC:AMPS:TRIG:PATT <string>
DEC:AMPS:TRIG:PATT?
Scr een /field eq u iva len t
DEC:AMPS:TRIG:PATT controls the Trigger Pattern (bin) field on
the SIGNALING DECODER screen when the Modefield is set to
AMPS-TACS.
200
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:DTMF :GATE <r ea l n u m ber >
:DTMF :GATE?
This command specifies how long the decoder analyzes a signal after it
has been triggered. Up to 6.55 seconds of gate time can be specified.
If the gate time is too long, the decoder ’s buffer becomes full. A message
is displayed instructing you to decrease the gate time.
but does not use the :STATe command.
Syn t a x
DEC:DTMF:GATE <real number>
DEC:DTMF:GATE?
Scr een /field eq u iva len t
DEC:DTMF:GATE controls the Gate Timefield on the SIGNALING
DECODER screen when the Modefield is set to DTMF.
:F GEN:GATE <r ea l n u m ber >
This command specifies how long the decoder analyzes a signal after it
has been triggered. Up to 6.55 seconds of gate time can be specified.
If the gate time is too long, the decoder ’s buffer becomes full. A message
is displayed instructing you to decrease the gate time.
but does not use the :STATe command.
Syn t a x
DEC:FGEN:GATE <real number>
Scr een /field eq u iva len t
DEC:FGEN:GATE controls the Gate Timefield on the SIGNALING
DECODER screen when the Modefield is set to Func Gen.
Chapter 1
201
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:NAMP s| NTACs:CHANn el <str in g>
:NAMP s| NTACs:CHANn el?
These commands set/query the type of data to decode.
•
•
‘Cntl’ selects reverse control channel (RECC) data.
‘Voice’ selects reverse voice channel (RVC) data.
Syn t a x
DEC:NAMP:CHAN ‘Cntl’
‘Voice’
DEC:NAMP:CHAN?
Scr een /field eq u iva len t
DEC:NAMP:CHAN controls the Channelfield on the SIGNALING
DECODER screen when the Modefield is set to AMPS-TACSor
NAMP-NTAC.
:NAMP s| NTACs:GATE <r ea l n u m ber >
:NAMP s| NTACs:GATE ?
This command specifies how long the decoder analyzes a signal after it
has been triggered. Up to 6.55 seconds of gate time can be specified. The
minimum gate time must be long enough to allow the preamble and all
necessary data bits to be captured.
If the gate time is too long, the decoder ’s buffer becomes full. A message
is displayed instructing you to decrease the gate time.
This function is not used with the NAMPS-NTACS RVC decoder.
but does not use the :STATe command.
Syn t a x
DEC:NAMP:GATE <real number>
DEC:NAMP:GATE?
Scr een /field eq u iva len t
DEC:NAMP:GATE controls the Gate Timefield on the SIGNALING
DECODER screen when the Modefield is set to NAMP-NTAC.
202
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:NAMP s| NTACs:DTMF :GATE <r ea l n u m ber >
:NAMP s| NTACs:DTMF :GATE?
These commands set/query how long the decoder analyzes a signal after
it has been triggered. Up to 6.55 seconds of gate time can be specified.
The minimum gate time must be long enough to allow the preamble
and all necessary data bits to be captured.
If the gate time is too long, the decoder ’s buffer becomes full. A message
is displayed instructing you to decrease the gate time.
but does not use the :STATe command.
Syn t a x
DEC:NAMP:DTMF:GATE <real number>
DEC:NAMP:DTMF:GATE?
Scr een /field eq u iva len t
DEC:NAMP:DTMF:GATE controls the Gate Time field on the
SIGNALING DECODER screen when the Modefield is set to
NAMP-NTAC, the Channelfield is set to Voice, and the Measurefield is
set to DTMF.
:NAMP s| NTACs:RVC <str in g>
:NAMP s| NTACs:RVC?
These commands set/query the type of decoded data to display. This
command is used in conjunction with the DEC:NAMP:CHAN ‘Voice’
command.
Syn t a x
DEC:NAMP:RVC ‘DSAT’
‘Data’
‘DTMF’
DEC:NAMP:RVC?
Scr een /field eq u iva len t
DEC:NAMP:RVC controls the Measurefield on the SIGNALING
DECODER screen when the Modefield is set to NAMP-NTACand the
Channelfield is set to Voice.
Chapter 1
203
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DECoder subsystem
:NAMP s| NTACs:STANd a r d <str in g>
:NAMP s| NTACs:STANd a r d ?
These commands set/query the expected frame structure and channel
range of the decoder ’s incoming signal. Trying to run a test with the
wrong standard selected will result in incorrectly decoded data, or will
result in a displayed error message.
Syn t a x
DEC:NAMP:STAN ‘NAMP’
‘NTAC’
DEC:NAMP:STAN?
Scr een /field eq u iva len t
DEC:NAMP:STAN controls the Standardfield on the SIGNALING
DECODER screen when the Modefield is set to NAMP-NTAC.
:NAMP s| NTACs:TRIGger :PATTer n <str in g>
:NAMP s| NTACs:TRIGger :PATTer n ?
These commands set/query the bit pattern to filter displayed
information. The decoder only displays the received data when this
binary pattern is encountered immediately after triggering. This is
helpful when you only want to display messages containing very
specific information.
The trigger pattern is entered as a sequence of ones, zeros, and dots. A
dot will cause the decoder to trigger for either a one or a zero in that bit
position in the received data stream.
This function is not available for decoding NAMPS-NTACS RVC
information.
Syn t a x
DEC:NAMP:TRIG:PATT <string>
DEC:NAMP:TRIG:PATT?
Scr een /field eq u iva len t
DEC:NAMP:TRIG:PATT controls the Trigger Pattern (bin) field on
the SIGNALING DECODER screen when the Modefield is set to
NAMP-NTAC, and the Channelfield is set to Cntl.
204
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
DISPlay subsystem
DISP la y su bsystem
The DISPlay subsystem controls the display of screens. A screen should
be displayed before a measurement from that screen is made.
DISP la y
DISP la y?
DISP sets/queries which screen is displayed. You use the DISP REM
command to lock the Test Set’s display.
Syn t a x
DISP AFANalyzer !AF ANALYZER screen
DISP CANanalyzer !CDMA ANALYZER screen
DISP CDANalyzer !CODE DOM screen (code domain analyzer)
DISP CONFigure
DISP DECoder
DISP ENCoder
DISP HELP
!INSTRUMENT CONFIGURE screen
!SIGNALING DECODER screen
!SIGNALING ENCODER screen
!HELP screen
DISP IOConfigure !I/O CONFIGURE screen
DISP IQPlot
!IQ PLOT screen
!MESSAGES screen
DISP MESSages
DISP OSCilloscope !SCOPE screen
DISP PCONfigure !PRINTER CONFIGURE screen
DISP RFANalyzer !RF ANALYZER screen
DISP RFGen
!RF GENERATOR screen
!SPEC ANL screen
!SERVICE screen
DISP SANalyzer
DISP SERVice
DISP TCONfigure !TESTS (External Devices) screen
DISP REMote
DISP?
!locks the display
!returns the screen name being displayed
Chapter 1
205
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Integer Number Setting Syntax
In teger Nu m ber Settin g Syn ta x
This syntax is for setting values of commands which require integer
values. It is to be used with commands which call for the Integer
Number Setting Syntax.
An example of a command that requires the Integer Setting Syntax is
Syn ta x
:Previous Syntax <integer_value> !decimal value
:Previous Syntax #B<Binary_integer_value> !maximum 32 bits
:Previous Syntax #O<Octal_integer_value>
:Previous Syntax #H<Hexadecimal_integer_value>
:Previous Syntax:INCRement UP !Increments the present value
:Previous Syntax:INCRement DOWN !Decrements the present value
:Previous Syntax? !Query Returns the present value
E xa m p le 1-1
E xa m p les
RFAN:RFCH 47
RFAN:RFCH #B101111 !sets channel to 47 binary
RFAN:RFCH #O57 !sets channel to 47 octal
RFAN:RFCH #H2F !sets channel to 47 hexadecimal
RFAN:RFCH:INCR UP !increments by 1
RFAN:RFCH:INCR DOWN !decrements by 1
206
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
I/Q Plot Subsystem
I/Q P lot Su bsystem
CONTr ols <str in g>
:CONTr ols?
These commands set/query the string that matches the current field
contents.
Syn t a x
IQPL:CONT ‘Main’
‘Trigger’
IQPL:CONT?
Scr een /field eq u iva len t
IQPL:CONT? reads current contents of Controls field on the IQ PLOT
screen. Only the images Main and Trigger are available.
[:DISP la y]:SCALe <st r in g>
[:DISP la y]:SCALe?
These commands set/query the string that matches the current field
contents.
Syn t a x
IQPL[:DISP]:SCAL ‘0.50/div’
‘1.0/div’
‘2.0/div’
‘4.0/div’
IQPL[:DISP]:SCAL?
Scr een /field eq u iva len t
IQPL[:DISP]:SCAL? sets or reads the current value of the Scale field
on the IQ PLOT screen. This field sets the scale of the plot.
Chapter 1
207
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
I/Q Plot Subsystem
:MEASu r em en t:MODE <str in g>
:MEASu r em en t:MODE?
These commands set/query the current measurement mode for the I/Q
plot screen.
Syn t a x
IQPL:MEAS:MODE ‘Single’
‘Cont’
IQPL:MEAS:MODE?
Scr een /field eq u iva len t
IQPL:MEAS:MODE reads the Measurement field of the Main image on
the IQ PLOT screen.
:MEASu r em en t:INTer va l <r ea l n u m ber >
:MEASu r em en t:INTer va l?
These commands set/query the current field contents of the IQ plot
screen field, Meas Int. The units of time are measured in milliseconds.
Syn t a x
IQPL:MEAS:INT <real number> ! values from 1.5 to 8.0 ms
IQPL:MEAS:INT? !returns the time interval.
Scr een /field eq u iva len t
IQPL:MEAS:INT sets the Meas Int field on the IQ PLOT screen. The
query returns the current setting.
:TRIGger :ARM
This command arms the IQ Plot measurement. This command does not
affect continuous measurement. To put the IQ Plot measurement in
single triggering mode, use the TRIG:MODE:RETR SING command.
triggering.
Syn t a x
IQPL:TRIG:ARM !arms the IQ Plot measurements.
Scr een /field eq u iva len t
IQPL:TRIG:ARM controls the Arm Meas field of the Analyzer field on
the Main image of the IQ PLOT screen.
208
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
I/Q Plot Subsystem
:TRIGger :DARM
This command disarms the IQ Plot measurement when it has been put
into single triggering mode using the TRIG:MODE:RETR SING. See
GPIB triggering.
Syn t a x
IQPL:TRIG:DARM !disarms the IQ Plot measurements.
Scr een /field eq u iva len t
IQPL:TRIG:DARM controls the Disarm selection of the Analyzer field
of the Main image of the IQ PLOT screen.
:TRIGger :DELa y <r ea l n u m ber >
:TRIGger :DELa y?
These commands set/query the current field contents of the
Trig Delayfield on the IQ Plot screen.
Syn t a x
IQPL:TRIG:DEL <real number from 20µs to 10s>
IQPL:TRIG:DEL?
Scr een /field eq u iva len t
IQPL:TRIG:DEL sets the Trig Delay field of the Trigger image when
the Trig Event field is set to Delay on the IQ PLOT screen. The query
returns the current value.
:TRIGger [:EVENt] <st r in g>
:TRIGger [:EVENt]?
These commands set/query the trigger interval in the IQ plot screen.
Syn t a x
IQPL:TRIG[:EVEN] ‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Delay’
‘Immed’
IQPL:TRIG[:EVEN]?
Scr een /field eq u iva len t
IQPL:TRIG[:EVEN] sets the Trig Event field of the Trigger image
on the IQ PLOT screen.
Chapter 1
209
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
I/Q Plot Subsystem
:TRIGger :QUALifier <str in g>
:TRIGger :QUALifier ?
These commands set/query the qualifying event for the trigger in the IQ
plot screen. The qualifying event is the event that must occur before a
trigger is accepted. The trigger event is set by the IQPL:TRIG:EVEN
command.
Syn t a x
IQPL:TRIG:QUAL ‘None’
‘27 ms’
‘20 ms’
‘80 ms’
‘2 s’
‘Ampl Lo’
‘Ampl Mid’
‘Ampl Hi’
‘External’
IQPL:TRIG:QUAL?
Scr een /field eq u iva len t
IQPL:TRIG:QUAL sets the Qual Event field of the Trigger image of
the IQ PLOT screen. The query returns the current setting.
210
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
MEASu r e su bsystem
The MEAS subsystem has a set of unique commands. These are the
measurement command <meas cmnd> set. They control features of the
Test Set such as setting measurement limits, units and the meters. See
these commands.
Most commands have both a <meas cmnd> parameter and a query
command.
•
The command using <meas cmnd> allows you to set certain
parameters of the measurement such as limits, averages, and units.
•
The query command is the command that reads the measurement
and returns a value.
:RESet
This command resets all measurements in progress.
Syn t a x
MEAS:RESET
Scr een /field eq u iva len t
MEAS:RESET does not have an equivalent control field on the Test Set.
:AF Req u en cy:ACLevel <m ea s cm n d >
:AF Req u en cy:ACLevel?
These commands set/query the AC level measurement. It measures the
AC level of the audio source (SSB Demod, Audio In, Ext Mod, or Audio
Out) as selected by the AFAN:INP command on page 59.
Syn t a x
MEAS:AFR:ACL <meas cmd>
MEAS:AFR:ACL? !returns real value
Scr een /field eq u iva len t
MEAS:AFR:ACL? reads the AC Levelmeasurement field on the AF
ANALYZER screen when the AF Anl Infield is set to Audio In, Audio
Out, Ext Mod, or SSB Demod. This measurement is also displayed on the
RF ANALYZER and RF GENERATOR screens.
Chapter 1
211
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:AM <m ea s cm n d >
:AF Req u en cy:AM?
These commands set/query the AM depth measurement. To use this
measurement you must select either the AM Mod or AM Demod audio
source (AFAN:INP).
Syn t a x
MEAS:AFR:AM <meas cmd>
MEAS:AFR:AM? !returns real value
E xa m p le
MEAS:AFR:AM:METer ON !displays the measurement in the meter
Scr een /field eq u iva len t
MEAS:AFR:AM? reads the AM Depthmeasurement field on the AF
ANALYZER screen when the AF Anl Infield is set to AM Mod, or AM
Demod. This measurement is also displayed on the RF ANALYZER and
RF GENERATOR screens.
:AF Req u en cy:DCAM <m ea s cm n d >
:AF Req u en cy:DCAM?
These commands set/query the DC AM measurement. To use this
measurement, you must have the DC level measurement selected (see
Syn t a x
MEAS:AFR:DCAM <meas cmd>
MEAS:AFR:DCAM? !returns a real value
E xa m p le
MEAS:AFR:DCAM:AVERage 4 !averages DCAM over 4 measurements
MEAS:AFR:DCAM?
!returns the measured value
Scr een /field eq u iva len t
MEAS:AFR:DCAM? reads the DC Level(%) measurement field on the
AF ANALYZER screen when the AF Anl Infield is set to AM Mod, or AM
Demod. This measurement is also displayed on the RF GENERATOR
and RF ANALYZER screens.
212
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:DCF M <m ea s cm n d >
:AF Req u en cy:DCF M?
These commands set/query the DC FM measurement. To use this
measurement, you must have the DC level measurement selected (see
Syn t a x
MEAS:AFR:DCFM <meas cmd>
MEAS:AFR:DCFM? !returns a real value
E xa m p le
MEAS:AFR:DCFM:AVERage 4 !averages DCFM over 4 measurements
MEAS:AFR:DCFM?
!returns the measured value
Scr een /field eq u iva len t
MEAS:AFR:DCFM? reads the DC Level(kHz) measurement field on
the AF ANALYZER screen when the AF Anl Infield is set to FM Mod, or
FM Demod. This measurement is also displayed on the RF GENERATOR
and RF ANALYZER screens.
Chapter 1
213
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:DCVolts <m ea s cm n d >
:AF Req u en cy:DCVolts?
These commands set/query the DC voltmeter. To use this measurement,
you must have the DC level measurement selected (see
audio sources: SSB Demod, Audio In, Ext Mod, or Audio Out (see
Syn t a x
MEAS:AFR:DCV <meas cmd>
MEAS:AFR:DCV? !returns a real value
E xa m p le
MEAS:AFR:DCV mV !sets the measurement unit to mV
MEAS:AFR:DCV? !returns the real value in millivolts
Scr een /field eq u iva len t
MEAS:AFR:DCV? reads the DC Level(V) measurement field on the AF
ANALYZER screen when the AF Anl Infield is set to Audio In, Audio
Out, Ext Mod, or SSB Demod. This measurement is also displayed on the
RF GENERATOR and RF ANALYZER screens.
:AF Req u en cy:DISTor tion <m ea s cm n d >
:AF Req u en cy:DISTor tion ?
These commands set/query the distortion measurement. This
measurement is selected by using the MEAS:AFR:SEL ‘Distn’
using the :AFR:DIST query command.
Syn t a x
MEAS:AFR:DIST <meas cmd>
MEAS:AFR:DIST? !returns a real value
E xa m p le
MEAS:AFR:SEL ‘DISTN’ ! selects the distortion measurement
MEAS:AFR:DIST?
!returns the measured value
Scr een /field eq u iva len t
MEAS:AFR:DIST? reads the Distnmeasurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
214
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:F M <m ea s cm n d >
:AF Req u en cy:F M?
These commands set/query the FM deviation measurement. This
measurement is active when FM Mod or FM Demod is selected by using
Syn t a x
MEAS:AFR:FM <meas cmd>
MEAS:AFR:FM? !returns real value
E xa m p le
MEAS:AFR:FM:AVERage:RESet !resets the number of averages
MEAS:AFR:FM?
!returns the measured value
Scr een /field eq u iva len t
MEAS:AFR:FM? reads the FM Deviationmeasurement field on the AF
ANALYZER screen when the AF Anl Infield is set to FM Mod, or FM
Demod. This measurement is also displayed on the RF GENERATOR
and RF ANALYZER screens.
:AF Req u en cy:F R EQu en cy <m ea s cm n d >
:AF Req u en cy:F R EQu en cy?
These commands set/query the audio frequency measurement. This
measurement is active when AF Freq is selected by using the
Syn t a x
MEAS:AFR:FREQ <meas cmd>
MEAS:AFR:FREQ? !returns real value
E xa m p le
MEAS:AFR:SEL ‘AF Freq’ !selects the measurement
MEAS:AFR:FREQ?
!returns the measurement’s value
Scr een /field eq u iva len t
MEAS:AFR:FREQ? reads the AF Freqmeasurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
Chapter 1
215
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:SE Lect <m ea s cm n d >
:AF Req u en cy:SE Lect?
These commands set/query which audio frequency measurement is
displayed on the AF ANALYZER screen.These measurements are also
displayed on the RF GENERATOR and RF ANALYZER screens.
Syn t a x
MEAS:AFR:SEL ‘SINAD’
‘Distn’
‘SNR’
‘AF Freq’
‘DC Level’
MEAS:AFR:SEL?
!returns the selected measurement
E xa m p le
MEAS:AFR:SEL ‘AF Freq’ !selects the AF Frequency measurement
Scr een /field eq u iva len t
MEAS:AFR:SEL selects the audio frequency measurement that will be
displayed on the AF ANALYZER screen. These measurements are also
displayed on the RF GENERATOR and RF ANALYZER screens.
:AF Req u en cy:SINAD <m ea s cm n d >
:AF Req u en cy:SINAD?
These commands set/query the SINAD measurement. SINAD must
first be selected using the MEAS:AFR:SEL ‘SINAD’ command (see
Syn t a x
MEAS:AFR:SINAD <meas cmd> !controls the SINAD command
MEAS:AFR:SINAD?
!returns the measured value
E xa m p le
MEAS:AFR:SINAD
!selects the measurement
Scr een /field eq u iva len t
MEAS:AFR:SINAD? reads the SINADmeasurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
216
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:AF Req u en cy:SNR <m ea s cm n d >
:AF Req u en cy:SNR?
These commands set/query the SNR measurement. SNR must first be
Syn t a x
MEAS:AFR:SNR <meas cmd> !controls the SNR command
MEAS:AFR:SNR?
!returns the measurement’s value
E xa m p le
MEAS:AFR:SNR
!displays the measurement
Scr een /field eq u iva len t
MEAS:AFR:SNR? reads to the SNRmeasurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
:CANa lyzer :ADC:AP OWer a d c:LEVel <m ea s cm n d >
:CANa lyzer :ADC:AP OWer a d c:LEVel?
These commands set/query the ADC for the average power
measurement. The ADC is a measure of how close the actual input
signal is to the maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ADC:APOW:LEV <meas cmd>
MEAS:CAN:ADC:APOW:LEV?
E xa m p le
MEAS:CAN:ADC:APOW:LEV? !displays the measured value
Scr een /field eq u iva len t
MEAS:CAN:ADC:APOW:LEV? reads the ADC FSmeasurement field on
the CDMA ANALYZER screen when an average power measurement is
selected. This measurement is also displayed on the CDMA
GENERATOR screen.
Chapter 1
217
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :ADC:EVMa d c:LEVel <m ea s cm n d >
:CANa lyzer :ADC:EVMa d c:LEVel?
These commands set/query the ADC for the EVM measurement. The
ADC is a measure of how close the actual input signal is to the
maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ADC:EVM:LEV <meas cmd>
MEAS:CAN:ADC:EVM:LEV?
E xa m p le
MEAS:CAN:ADC:EVM:LEV? !displays the measurement
Scr een /field eq u iva len t
MEAS:CAN:ADC:EVM:LEV? reads the ADC FSmeasurement field on
the CDMA ANALYZER screen when an EVM measurement is selected.
:CANa lyzer :ADC:RHOa d c:LEVel <m ea s cm n d >
:CANa lyzer :ADC:RHOa d c:LEVel?
These commands set/query the ADC for the rho measurement. The
ADC is a measure of how close the actual input signal is to the
maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ADC:RHO:LEV <meas cmd>
MEAS:CAN:ADC:RHO:LEV?
E xa m p le
MEAS:CAN:ADC:RHO:LEV? !displays the measurement
Scr een /field eq u iva len t
MEAS:CAN:ADC:RHO:LEV? reads the ADC FSmeasurement field on
the CDMA ANALYZER screen when a rho measurement is selected.
This measurement is also displayed on the CDMA GENERATOR
screen.
218
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :ADC:TP OWer a d c:LEVel <m ea s cm n d >
:CANa lyzer :ADC:TP OWer a d c:LEVel?
These commands set/query the ADC for the channel power
measurement. The ADC is a measure of how close the actual input
signal is to the maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ADC:TPOW:LEV <meas cmd>
MEAS:CAN:ADC:TPOW:LEV?
E xa m p le
MEAS:CAN:ADC:TPOW:LEV? !displays the measurement
Scr een /field eq u iva len t
MEAS:CAN:ADC:TPOW:LEV? reads the ADC FSmeasurement field on
the CDMA ANALYZER screen. This measurement is also displayed on
the CDMA GENERATOR screen.
:CANa lyzer :CAR r ier :F EE Dth r ou gh <m ea s cm n d >
:CANa lyzer :CAR r ier :F EE Dth r ou gh ?
These commands set/query the carrier feedthrough measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:CAR:FEED <meas cmd>
MEAS:CAN:CAR:FEED? !returns the level
E xa m p le
MEAS:CAN:CAR:FEED?
Scr een /field eq u iva len t
MEAS:CAN:CAR:FEED? reads the Carrier Feedthrumeasurement
field on the CDMA ANALYZER screen. This measurement is also
displayed on the CDMA GENERATOR screen.
Chapter 1
219
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :ERR or :F REQu en cy <m ea s cm n d >
:CANa lyzer :ERR or :F REQu en cy?
These commands set/query the frequency error measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ERR:FREQ <meas cmd>
MEAS:CAN:ERR:FREQ?
E xa m p le
MEAS:CAN:ERR:FREQ?
Scr een /field eq u iva len t
MEAS:CAN:ERR:FREQ? reads the Frequency Errormeasurement
field on the CDMA ANALYZER screen. This measurement is also
displayed on the CDMA GENERATOR screen.
:CANa lyzer :ERR or :MAGNitu d e <m ea s cm n d >
:CANa lyzer :ERR or :MAGNitu d e?
These commands set/query the magnitude error measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ERR:MAGN <meas cmd>
MEAS:CAN:ERR:MAGN?
E xa m p le
MEAS:CAN:ERR:MAGN?
Scr een /field eq u iva len t
MEAS:CAN:ERR:MAGN? reads the Magnitude Errormeasurement
field on the CDMA ANALYZER screen. This measurement is also
displayed on the CDMA GENERATOR screen.
220
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :ERR or :P HASe <m ea s cm n d >
:CANa lyzer :ERR or :P HASe?
These commands set/query the phase error measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:ERR:PHAS <meas cmd>
MEAS:CAN:ERR:PHAS?
E xa m p le
MEAS:CAN:ERR:PHAS?
Scr een /field eq u iva len t
MEAS:CAN:ERR:PHAS? reads the Phase Errormeasurement field on
the CDMA ANALYZER screen. This measurement is also displayed on
the CDMA GENERATOR screen.
:CANa lyzer :EVM <m ea s cm n d >
:CANa lyzer :EVM?
These commands set/query the error vector magnitude (EVM)
measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:EVM <meas cmd>
MEAS:CAN:EVM?
E xa m p le
MEAS:CAN:EVM? !returns EVM in %
Scr een /field eq u iva len t
MEAS:CAN:EVM? reads the EVMmeasurement field on the CDMA
ANALYZER screen. This measurement is also displayed on the CDMA
GENERATOR screen.
Chapter 1
221
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :P NOF fset?
This command queries the PN offset measurement.
Syn t a x
MEAS:CAN:PNOF? !returns the measurement
Scr een /field eq u iva len t
MEAS:CAN:PNOF? reads the PN Offsetmeasurement field on the
CDMA ANALYZER screen. This measurement is also displayed on the
CDMA GENERATOR screen.
:CANa lyzer :P OWer :ACP :LRATio <m ea s cm n d >
:CANa lyzer :P OWer :ACP :LRATio?
These commands set/query lower ratio measurement of the adjacent
channel power measurement. This ratio is the ratio of the total power in
the specified bandwidth at the specified offset below the center
frequency, to the power at the center frequency.
Syn t a x
MEAS:CAN:POW:ACP:LRAT <meas cmd>
MEAS:CAN:POW:ACP:LRAT?
Scr een /field eq u iva len t
MEAS:CAN:POW:ACP:LRAT? reads the Lower ACP Ratio
measurement field on the CDMA ANALYZER screen when an ACP
measurement is selected. This measurement is also displayed on the
CDMA GENERATOR screen.
222
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :P OWer :ACP :URATio <m ea s cm n d >
:CANa lyzer :P OWer :ACP :URATio?
These commands set/query upper ratio measurement of the adjacent
channel power measurement. This ratio is the ratio of the total power in
the specified bandwidth at the specified offset above the center
frequency, to the power at the center frequency.
Syn t a x
MEAS:CAN:POW:ACP:URAT <meas cmd>
MEAS:CAN:POW:ACP:URAT?
Scr een /field eq u iva len t
MEAS:CAN:POW:ACP:URAT? reads the Upper ACP Ratio
measurement field on the CDMA ANALYZER screen when an ACP
measurement is selected. This measurement is also displayed on the
CDMA GENERATOR screen.
:CANa lyzer :P OWer :ACP :CENTer <m ea s cm n d >
:CANa lyzer :P OWer :ACP :CENTer ?
These commands set/query center channel measurement of the
adjacent channel power measurement.
Syn t a x
MEAS:CAN:POW:ACP:CENT <meas cmd>
MEAS:CAN:POW:ACP:CENT?
Scr een /field eq u iva len t
MEAS:CAN:POW:ACP:CENT? reads the Center Channel
measurement field on the CDMA ANALYZER screen when an ACP
measurement is selected. This measurement is also displayed on the
CDMA GENERATOR screen.
Chapter 1
223
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :P OWer :AVG <m ea s cm n d >
:CANa lyzer :P OWer :AVG?
These commands set/query the average power measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:POW:AVG <meas cmd>
MEAS:CAN:POW:AVG?
E xa m p le
MEAS:CAN:POW:AVG? !returns the measurement
Scr een /field eq u iva len t
MEAS:CAN:POW:AVG? reads the Avg Pwrmeasurement field on the
CDMA ANALYZER screen. This measurement is also displayed on the
CDMA GENERATOR screen.
:CANa lyzer :P OWer :CHANn el <m ea s cm n d >
:CANa lyzer :P OWer :CHANn el?
These commands set/query the channel power measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:POW:CHAN <meas cmd>
MEAS:CAN:POW:CHAN?
E xa m p le
MEAS:CAN:POW:CHAN? !displays the measurement
Scr een /field eq u iva len t
MEAS:CAN:POW:CHAN? reads the Chan Pwrmeasurement field on
the CDMA ANALYZER screen. This measurement is also displayed on
the CDMA GENERATOR screen.
224
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CANa lyzer :RHO <m ea s cm n d >
:CANa lyzer :RHO?
These commands set/query the rho measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:RHO <meas cmd>
MEAS:CAN:RHO?
E xa m p le
MEAS:CAN:RHO?
Scr een /field eq u iva len t
MEAS:CAN:RHO? reads the Rhomeasurement field on the CDMA
ANALYZER screen. This measurement is also displayed on the CDMA
GENERATOR screen.
:CANa lyzer :TIME :OF F Set <m ea s cm n d >
:CANa lyzer :TIME :OF F Set?
These commands set/query the time offset measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CAN:TIME:OFFS <meas cmd>
MEAS:CAN:TIME:OFFS?
E xa m p le
MEAS:CAN:TIME:OFFS?
Scr een /field eq u iva len t
MEAS:CAN:TIME:OFFS? reads the Time Offsetmeasurement field
on the CDMA ANALYZER screen. This measurement is also displayed
on the CDMA GENERATOR screen.
Chapter 1
225
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :ADC <m ea s cm n d >
:CDANa lyzer :ADC?
IS-95 Only mode. These commands set/query the ADC measurement in
the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:ADC <meas cmd>
MEAS:CDAN:ADC?
E xa m p le
MEAS:CDAN:ADC?
Scr een /field eq u iva len t
MEAS:CDAN:ADC? reads the ADCfsmeasurement field on the Gain
menu of the CODE DOM screen when the CDMA standard is set to
“IS-95 Only”.
:CDANa lyzer :CARRier :F EEDth r ou gh <m ea s cm n d >
:CDANa lyzer :CARRier :F EEDth r ou gh ?
IS-95 Only mode. These commands set/query the carrier feedthrough
measurement on the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:CARR:FEED <meas cmd>
MEAS:CDAN:CARR:FEED?
E xa m p le
MEAS:CDAN:CARR:FEED?
Scr een /field eq u iva len t
MEAS:CDAN:CARR:FEED? reads the Car FTmeasurement field on
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”.
226
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :CP OWer <m ea s cm n d >
:CDANa n lyzer :CP OWer ?
IS-95 Only mode. These command set/query the channel power
measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:CPOW <meas cmd>
MEAS:CDAN:CPOW?
Scr een /field eq u iva len t
MEAS:CDAN:CPOW? reads the ChPwrmeasurement field on the CD
Setupmenu of the CODE DOM screen when the CDMA standard is set
to “IS-95 Only”.
:CDANa lyzer :ER Ror :F RE Qu en cy <m ea s cm n d >
:CDANa lyzer :ER Ror :F RE Qu en cy?
IS-95 Only mode. These commands set/query the frequency error
measurement on the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:ERR:FREQ <meas cmd>
MEAS:CDAN:ERR:FREQ?
E xa m p le
MEAS:CDAN:ERR:FREQ?
Scr een /field eq u iva len t
MEAS:CDAN:ERR:FREQ? reads the Freq Errmeasurement field on
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”.
Chapter 1
227
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :ER Ho?
IS-95 Only mode. This command queries the estimated rho
measurement. Estimated rho is an approximation of rho that is
calculated without taking the system out of service.
Syn t a x
MEAS:CDAN:ERH?
Scr een /field eq u iva len t
MEAS:CDAN:ERH? queries the Est Rhofield CODE DOM screen
when the CDMA standard is set to “IS-95 Only”.
:CDANa lyzer :MARKer :AP OWer <m ea s cm n d >
:CDANa lyzer :MARKer :AP OWer ?
IS-95 Only mode. These commands set/query the absolute power
measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:MARK:APOW <meas cmd>
MEAS:CDAN:MARK:APOW?
E xa m p le
MEAS:CDAN:MARK:APOW?
Scr een /field eq u iva len t
MEAS:CDAN:MARK:APOW? reads the Lvlfield on the Markermenu
of the CODE DOM screen when power (or fast power) measurement is
selected and the Ch pwr unitfield on the CD Setupmenu is set to Abs.
This applies when the CDMA standard is set to “IS-95 Only”.
228
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :MARKer :LE Vel <m ea s cm n d >
:CDANa lyzer :MARKer :LE Vel?
IS-95 Only mode. These commands set/query the level at the marker on
the code domain analyzer ’s trace during power or fast power
made relative to the value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:MARK:LEV <meas cmd>
MEAS:CDAN:MARK:LEV?
E xa m p le
MEAS:CDAN:MARK:LEV?
Scr een /field eq u iva len t
MEAS:CDAN:MARK:LEV? reads the Lvlfield on the Markermenu of
the CODE DOM screen when a power or fast power measurement is
selected, and the Ch pwr unitfield on the CD Setupmenu is set to Rel.
This applies when the CDMA standard is set to “IS-95 Only”.
Chapter 1
229
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :MARKer :P H ASe <m ea s cm n d >
:CDANa lyzer :MARKer :P H ASe?
IS-95 Only mode. These commands set/query the phase at the marker
on the code domain analyzer ’s trace during phase measurements (see
value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:MARK:PHAS <meas cmd>
MEAS:CDAN:MARK:PHAS?
E xa m p le
MEAS:CDAN:MARK:PHAS?
Scr een /field eq u iva len t
MEAS:CDAN:MARK:PHAS? reads the Phsefield on the Markermenu
of the CODE DOM screen when a phase measurement is selected. This
applies when the CDMA standard is set to “IS-95 Only”.
230
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :MARKer :TIME <m ea s cm n d >
:CDANa lyzer :MARKer :TIME?
IS-95 Only mode. These commands set/query the time at the marker on
the code domain analyze’s trace during a timing measurement (see
value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:MARK:TIME <meas cmd>
MEAS:CDAN:MARK:TIME?
E xa m p le
MEAS:CDAN:MARK:TIME?
Scr een /field eq u iva len t
MEAS:CDAN:MARK:TIME? reads the Timefield on the Markermenu
of the CODE DOM screen when a timing measurement is selected. This
applies when the CDMA standard is set to “IS-95 Only”.
:CDANa lyzer :P NOF fset?
IS-95 Only mode. This command queries the PN offset measurement.
Syn t a x
MEAS:CDAN:PNOF?
E xa m p le
MEAS:CDAN:PNOF?
Scr een /field eq u iva len t
MEAS:CDAN:PNOF? queries the PN Ofsmeasurement field on the
CODE DOM screen whent he CDMA standard is set to “IS-95 Only”,
and the CD pwr unitis set to Abson the CD Setup image of the CODE
DOMAIN screen.
Chapter 1
231
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :TIME:OF F Set <m ea s cm n d >
:CDANa lyzer :TIME:OF F Set?
IS-95 Only mode. These commands set/query the time offset
measurement of the code domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:TIME:OFFS <meas cmd>
MEAS:CDAN:TIME:OFFS?
E xa m p le
MEAS:CDAN:TIME:OFFS? !displays the measurement
Scr een /field eq u iva len t
MEAS:CDAN:TIME:OFFS? reads the Time Ofsmeasurement field on
the CODE DOM screen when the CDMA standard is set to “IS-95
Only”.
:CDANa lyzer :TR ACe:P OWer ?
IS-95 Only mode. This command queries the power in each of the 64
Walsh channels, relative to the pilot’s power. (Pilot power is
approximately two-thirds of the total power.) The measurement returns
64 values (in dB), one for each point.
Syn t a x
MEAS:CDAN:TRAC:POW?
Scr een /field eq u iva len t
MEAS:CDAN:TRAC:POW? does not correspond to any field on the
CODE DOM screen. This applies when the CDMA standard is set to
“IS-95 Only”.
232
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :TR ACe:TOF F set?
IS-95 Only mode. This command queries the timing in the 64 trace
points of the code domain analyzer. The measurement returns 64 values
(in seconds), one for each point.
Syn t a x
MEAS:CDAN:TRAC:TOFF?
Scr een /field eq u iva len t
MEAS:CDAN:TRAC:TOFF? does not correspond to any field on the
CODE DOM screen. This applies when the CDMA standard is set to
“IS-95 Only”.
:CDANa lyzer :TR ACe:P ER Ror ?
IS-95 Only mode. This command queries the phase in the 64 trace
points in the code domain analyzer. The measurement returns 64
values (in radians), one for each point.
Syn t a x
MEAS:CDAN:TRAC:PERR?
Scr een /field eq u iva len t
MEAS:CDAN:TRAC:PERR? does not correspond to any field on the
CODE DOM screen. This applies when the CDMA standard is set to
“IS-95 Only”.
:CDANa lyzer :TR ACe:TP OWer ?
IS-95 Only mode. This command queries the absolute (true) power in
each of the 64 Walsh channels, relative to the total power inside a 1.23
MHz bandwidth centered at the tune frequency. The measurement
returns 64 values (in dB), one for each point.
Syn t a x
MEAS:CDAN:TRAC:TPOW?
Scr een /field eq u iva len t
MEAS:CDAN:TRAC:TPOW? does not correspond to any field on the
CODE DOM screen. This applies when the CDMA standard is set to
“IS-95 Only”.
Chapter 1
233
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:ADC <m ea s cm d s>
:CDANa lyzer :IS2000:ADC?
IS-2000 only. These commands set/query the ADC measurement in the
Code Domain analyzer.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:CDAN:IS2000:ADC <meas cmds>
MEAS:CDAN:IS2000:ADC?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:ADC? reads the ADCfsmeasurement field on the
Gainmenu of the CODE DOMAIN screen when the CDMA standard is
set to “IS-2000”.
:CDANa lyzer :IS2000:CAR Rier [:F E EDth r ou gh ]?
IS-2000 only. This query returns a floating point number representing
the carrier feedthrough currently displayed in the Code Domain
analyzer of the Test Set.
Syn t a x
MEAS:CDAN:IS2000:CARR[:FEED]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:CARR[:FEED]? reads the Carrier FT
measurement field on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
234
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:CHANn el[:P OWer ]?
IS-2000 only. This query returns the channel power value (when active)
with the units dBm.
Syn t a x
MEAS:CDAN:IS2000:CHAN[:POW]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:CHAN[:POW]? reads the Chan Power
measurement field from the Referencemenu when the CD pwr unit is
set to Abson the CODE DOMAIN screen when the CDMA standard is
set to “IS-2000”.
:CDANa lyzer :IS2000:F RE Qu en cy[:E RRor ]?
IS-2000 only. This query returns frequency error for the main RF.
Syn t a x
MEAS:CDAN:IS2000:FREQ[:ERR]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:FREQ[:ERR]? reads the Freq Errmeasurement
field on the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
:CDANa lyzer :IS2000:MAR Ker :CHANn el:NUMBer ?
IS-2000 only. This query returns the Walsh Channel number for the
current marker position.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:NUMB?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:NUMB? reads the Chan Numfield
on the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
Chapter 1
235
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:MAR Ker :CHANn el:RATE:RC3?
IS-2000 only. This query returns the RC-3 data rate value for the
channel selected by the Marker ’s current position. The return value is
an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC3?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC3? reads the RATE RC-3
field of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and Sprd Factis selected.
:CDANa lyzer :IS2000:MAR Ker :CHANn el:RATE:RC4?
IS-2000 only. This query returns the RC-4 data rate value for the
channel selected by the Marker ’s current position. The return value is
an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC4?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC4? reads the RATE RC-4
field of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and Sprd Factis selected.
236
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:MAR Ker :CHANn el:RATE:RC5?
IS-2000 only. This query returns the RC-5 data rate value for the
channel selected by the Marker ’s current position. The return value is
an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC5?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:RATE:RC5? reads the RATE RC-5
field of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and Sprd Factis selected.
:CDANa lyzer :IS2000:MAR Ker :CHANn el:SP R ea d [:RATE]?
IS-2000 only. This query returns the spread factor (1, 2, 4, 8, 16, 32, 64,
128) of the channel selected by the Marker ’s current position. The
return value is an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:SPR[:RATE]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:SPR:RATE? reads the SPRD FACT
field of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
:CDANa lyzer :IS2000:MAR Ker :CHANn el[:WALSh ]:ORDer ?
IS-2000 only. This query returns the Walsh order (1, 2, 3, 4, 5, 6, 7) of
the channel selected by the marker ’s current position.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:WALS:ORD?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:WALS:ORD? reads the Walsh Ord
field of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
Chapter 1
237
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:MAR Ker :CHANn el[:WALSh ]:NUMBer ?
IS-2000 only. This query returns the parenthetical Walsh channel
number for the the channel selected by the marker ’s current position.
The return value is an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:WALS:ORD?
Scr een /field eq u iva len t MEAS:CDAN:IS2000:MARK:CHAN:WALS:ORD?
reads the Walsh Ord field of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
:CDANa lyzer :IS2000:MAR Ker :CHANn el:WIDTh ?
IS-2000 only. This query returns the total number of channels that
make up the currently selected supplemental channel. The return value
is an integer.
Syn t a x
MEAS:CDAN:IS2000:MARK:CHAN:WIDT?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:CHAN:WIDT? reads the Chan Sizefield
of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and Chan Sizeis selected.
238
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:MAR Ker :COMP lex:I[:LE Vel]?
IS-2000 only. This query returns the Marker Level for the I channel
(Top bar), when the Complex Power Measurement is active. The return
is a floating point number.
Syn t a x
MEAS:CDAN:IS2000:MARK:COMP:I[:LEV]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:COMP:I[LEV]? reads the I Pwr Lvl field
on the Mainmenu of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000” and the Measurement field is set to
Complex Pwr.
:CDANa lyzer :IS2000:MAR Ker :COMP lex:Q[:LEVel]?
IS-2000 only. This query returns the Marker Level for the Q channel
(bottom bar) when the Complex Power Measurement is active. The
return is a floating point number.
Syn t a x
MEAS:CDAN:IS2000:MARK:COMP:Q[:LEV]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:COMP:Q[:LEV]? reads the Q Pwr Lvl
field on the Mainmenu of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000” and measurement is Complex Pwr.
:CDANa lyzer :IS2000:MAR Ker :LEVel:ABSolu te?
IS-2000 only. This query returns the Marker Level, in dBm, when the
Channel power mode is active. The return is a floating point number
formatted as shown on the screen.
Syn t a x
MEAS:CDAN:IS2000:MARK:LEV:ABS?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:LEV:ABS? reads the Marker Lvl field of
the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and CD pwr unit is set to Abs.
Chapter 1
239
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:MAR Ker :NOISe?
IS-2000 only. This query returns the Marker Level for the Noise, when
the Power & Noise measurement is active. The return will be a floating
point number.
Syn t a x
MEAS:CDAN:IS2000:MARK:NOIS?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK:NOIS? reads the Noise Lvlfield in the
RH column of the Markermenu on the CODE DOMAIN screen when
the CDMA standard is set to “IS-2000” and measurement is Power &
Noise.
:CDANa lyzer :IS2000:MAR Ker [:P OWer ]?
IS-2000 only. This query returns the Marker Level, in dB, when the
Channel Power Mode is inactive. The return will be a floating point
number.
Syn t a x
MEAS:CDAN:IS2000:MARK[:POW]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:MARK[POW]? reads the Marker Lvlfield of the
CODE DOMAIN screen when the CDMA standard is set to “IS-2000”
and the CD pwr unitfield on the Reference menu is set to Rel.
:CDANa lyzer :IS2000:P Nu m ber :OF F Set?
:CDANa lyzer :IS2000:P NUMber :OF F Set?
IS-2000 only. This query returns the measured PN offset of the Pilot
signal as an integer value.
Syn t a x
MEAS:CDAN:IS2000:PN:OFFS?
MEAS:CDAN:IS2000:PNUM:OFFS?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:PN:OFFS? and
MEAS:CDAN:IS2000:PNUM:OFFS? queries the PN Ofsmeasurement
field on the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
240
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:RHO[:ESTim a ted ]?
IS-2000 only. This query returns the Estimated Rho when present (not
available in FAST Power Measurement). The returned value is a
floating point number. Estimated rho is an approximation of rho that is
calculated when there are more signals than a pilot alone.
Syn t a x
MEAS:CDAN:IS2000:RHO[:EST]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:RHO:EST? reads the Est Rhofield on the CODE
DOMAIN screen when the CDMA standard is set to “IS-2000”.
:CDANa lyzer :IS2000:TIME :OF F Set?
IS-2000 only. This query returns the time offset value of the current
Code Domain measurement as a floating point number.
Syn t a x
MEAS:CDAN:IS2000:TIME:OFFS?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TIME:OFFS? reads the Time Ofsmeasurement
field on the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
Chapter 1
241
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer [:BASic][:VALu e]?
IS-2000 only. This query returns an array of 128 values representing
the true (absolute) power of the Walsh channel on which the Marker is
currently positioned.
NOTE
The value returned represents the absolute power of the Walsh channel
not the supplemental channel. The power of the supplemental channel
must be read directly from the Marker Lvlvalue on the CODE
DOMAIN screen, or with the MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ALL?
query.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS][:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS][:VAL]? returns values
that match the values displayed for Power, Fast Power, and Power &
Noise measurements when CD pwr unit is set to Absfrom the
Reference image on the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer [:BASic]:ACTive?
IS-2000 only. This query returns the active channel information for the
Code Domain trace when making a Power, Fast Power, or Fast Power
Synchronize measurement. The returned entity consists of an integer
representing the number of active channels followed by a four-value
record for each channel. The four values for each record are:
•
•
•
•
Channel number
Spread factor for this channel
Power for this channel
A fourth (ignore it) value
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ACT?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ACT? has no equivalent
field on the CODE DOMAIN screen. The information can only be
returned when the CDMA standard is set to “IS-2000”, the
measurement selected is Power, Fast Poweror FstPwr Sync, and CD
pwr unitis set to Abson the Reference image of the CODE DOMAIN
screen.
242
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer [:BASic]:ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power, Fast Power, or Fast
Power Synchronize measurement. The returned entity consists of 128
four-value records for each bar in the trace. The four values for each
record are:
•
Channel number. If the selected location is part of a supplemental
channel, all the Walsh channels that comprise the supplemental
channel will be returned.
•
Power for this channel. If this is a supplemental channel, the total
power for the supplemental channel will be returned.
•
•
A third (ignore it) value
A flag indicating that the next bar should be connected to this bar as
part of a wider supplemental channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ALL?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW[:BAS]:ALL? has no equivalent
field on the CODE DOMAIN screen. The information can only be
returned when the CDMA standard is set to “IS-2000”, the
measurement selected is Power, Fast Poweror FstPwr Sync, and CD
pwr unitis set to Abson the Reference image of the CODE DOMAIN
screen.
Chapter 1
243
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TR ACe:ABSolu te:P OWer :COMP lex:I:ACTive?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:COMBin ed :ACTive?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:QACTive?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:IS2000:ACTive?
IS-2000 only. These queries return the active channel information for
the Code Domain trace when making a Complex Power measurement.
The return values consist of an integer representing the number of
active channels followed by a four value record for each channel. The
four values for each record are channel number, spread factor for this
channel, I value for this channel and the Q value for this channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:I:ACT?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:COMB:ACT?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:Q:ACT?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:IS2000:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value of these queries. These values are only accessible when the
CDMA standard is set to “IS-2000”, the measurement selected is
Complex Power, and CD pwr unitis set to Abson the Reference image
of the CODE DOMAIN screen.
244
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:I:ALL?
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :COMP lex:COMBin ed :ALL?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:Q:ALL?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:IS2000:ALL?
IS-2000 only. These queries return the information necessary to
recreate the Code Domain trace when making a Complex Power
measurement. The returned entity consists of 128 four-value records for
each bar in the trace. The four values for each record are channel
number, I value for this channel, Q value for this channel and a flag
indicating that the next bar should be connected to this bar as part of a
wider supplemental channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:I:ALL?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:COMB:ALL?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:Q:ALL?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:IS2000:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Complex Power, and CD pwr unitis set to Abson the Reference image
of the CODE DOMAIN screen.
Chapter 1
245
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:I[:VALu e]?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:Q[:VALu e]?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:COMBin ed [:VALu e]?
:CDANa lyzer :IS2000:TR ACe:ABSolu t e:P OWer :COMP lex:IS2000[:VALu e]?
IS-2000 only. These queries return an array of 128 values that
represent Spreader I Input Power and Spreader Q Input Power. This
represents the power of both IS-95 and IS-2000 channels.
NOTE
The values returned represent the absolute power of individual Walsh
channels not the supplemental channels of which they may be a part.
The power of supplemental channels must be read directly from
I Pwr Leveland Q Pwr Level fields on the CODE DOMAIN screen
when Complex Power measurement has been selected, or using the
queries: MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:Q:ALL? or
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:IS2000:ALL?
Syn ta x
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:I[:VAL]?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:COMB[:VAL]?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:Q[:VAL]?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:IS2000[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:I[:VAL]?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:COMB[:VAL]? returns
information (top set of bars) displayed for the Complex Power
measurement when CD pwr unit is set to Abs on the Reference
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”. MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:Q[:VAL]?
MEAS:CDAN:IS2000:TRAC:ABS:POW:COMP:IS2000[:VAL]? returns
the information displayed in the bottom trace of the Complex Power
measurement when the CD pwr unit is set to Abs on the Reference
image of the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
246
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :NOISe:ACTive?
IS-2000 only. This query returns active channel information for the
Code Domain trace when making a Power and Noise measurement. The
return entity consists of an integer representing the number of active
channels, followed by a four value record for each channel. The four
values for each record are channel number, spread factor for this
channel, Power, and Noise for this channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:NOIS:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Power and Noise, and CD pwr unitis set to Abson the Reference
image of the CODE DOMAIN screen.
Chapter 1
247
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :NOISe:ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power and Noise measurement.
The return entity consists of 128 four value records for each bar in the
trace. The four values for each record are channel number, Power for
this channel, Noise for this channel a flag indicating that the next bar
should be connected to this bar as part of a wider supplemental
channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:NOIS:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Power and Noise, and CD pwr unitis set to Abson the Reference
image of the CODE DOMAIN screen.
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :NOISe[:VALu e]?
IS-2000 only. This query returns an array of 128 values representing
each channel’s true (absolute) noise power.
NOTE
The values returned represent the absolute noise power of individual
Walsh channels not the noise of supplemental channels of which they
may be a part. The noise of supplemental channels must be read
directly from the Noise Lvlvalue on the CODE DOMAIN screen with
the Power & Noise measurement activated, or using the query
MEAS:CDAN:IS2000:TRAC:ABS:POW:POW:ALL?
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:NOIS[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW:NOIS[:VAL]? returns the noise
portion (hatched bars on the screen) of the measured power of each
channel of a Power and Noise measurement, when CD pwr unit is set
to Abson the Reference image of the CODE DOMAIN screen when the
CDMA standard is set to “IS-2000”.
248
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :P OWer :ACTive?
IS-2000 only. This query returns active channel information for the
Code Domain trace when making a Power and Noise measurement. The
return entity consists of an integer representing the number of active
channels followed by a four value record for each channel. The four
values for each record are channel number, spread factor for this
channel, Power, and Noise for this channel ..
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:POW:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Power and Noise, and CD pwr unitis set to Abson the Reference
image of the CODE DOMAIN screen.
Chapter 1
249
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :P OWer :ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power and Noise measurement.
The return entity consists of 128 four value records for each bar in the
trace. The four values for each record are channel number, Power for
this channel, Noise for this channel, and a flag indicating that the next
bar should be connected to this bar as part of a wider supplemental
channel.
When the selected location is part of a supplemental channel, all the
Walsh channels that comprise the supplemental channel will be
returned. If it is part of a supplemental channel, the total power for the
supplemental channel will be returned.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:POW:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Power and Noise, and CD pwr unitis set to Abson the Reference
image of the CODE DOMAIN screen.
:CDANa lyzer :IS2000:TRACe:ABSolu te:P OWer :P OWer [:VALu e]?
IS-2000 only. This query returns an array of 128 values representing
the true (absolute) power for each channel’s power level when making a
Power & Noise measurement.
NOTE
The value returned represents the absolute power of individual Walsh
channels not the supplemental channel of which they may be a part.
The power of supplemental channels must be read directly from the
Marker Lvlvalue on the CODE DOMAIN screen with the Power &
Noise measurement selected.
Syn t a x
MEAS:CDAN:IS2000:TRAC:ABS:POW:POW[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:ABS:POW:POW[:VAL]? returns the power
portion (top bars on the screen) of the measured power of each channel
of a Power and Noise measurement, when CD pwr unit is set to Abson
the Reference image of the CODE DOMAIN screen when the CDMA
standard is set to “IS-2000”.
250
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer [:BASic]:ACTive?
IS-2000 only. This query returns the active channel information for the
Code Domain trace when making a Power, Fast Power or Fast Power
Synchronize measurement. The return entity consists of an integer
representing the number of active channels followed by a four value
record for each channel. The four values for each record are channel
number, spread factor for this channel, Power for this channel and a
fourth value that should be ignored.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW[:BAS]:ACT?
Scr een /field eq u iva len t
There is no equivalent field for this query on the CODE DOMAIN
screen. The information is accessible only when a Power, Fast Power,
orPower & Noise measurement is being displayed, CD pwr unit is set
to Relfrom the Reference image on the CODE DOMAIN screen and
the CDMA standard is set to “IS-2000”.
Chapter 1
251
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer [:BASic]:ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power, Fast Power or Fast
Power Synchronize measurement. The return consists of 128 four value
records for each bar in the trace. The four values for each record are
channel number, Power for this channel, a third value that should be
ignored and a flag indicating that the next bar should be connected to
this bar as part of a wider supplemental channel.
If the selected location is part of a supplemental channel, all the Walsh
channels that comprise the supplemental channel and total power for
the supplemental channel will be returned.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW[:BAS]:ALL?
Scr een /field eq u iva len t
There is no equivalent field for this query on the CODE DOMAIN
screen. The information is accessible only when a Power, Fast Power,
orPower & Noise measurement is being displayed, CD pwr unit is set
to Relfrom the Reference image on the CODE DOMAIN screen and
the CDMA standard is set to “IS-2000”.
:CDANa lyzer :IS2000:TRACe:P OWer [:BASic][:VALu e]?
IS-2000 only. This query returns an array of 128 values representing
each channel’s power relative to the specified reference power.
NOTE
The values returned represent the power of individual Walsh channels
not the supplemental channels of which they may be a part. The power
of supplemental channels must be read directly from the Marker Lvl
value on the CODE DOMAIN screen.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW[:BAS][:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:POW[:BAS][:VAL]? returns values that
match those displayed for Power, Fast Power, and Power & Noise
measurements when CD pwr unit is set to Relfrom the Reference
image on the CODE DOMAIN screen when the CDMA standard is set
to “IS-2000”.
252
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:I:ACTive?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:COMBin ed :ACTive?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:QACTive?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:IS2000ACTive?
IS-2000 only. These queries return the active channel information for
the Code Domain trace when making a Complex Power measurement.
The return values consist of an integer representing the number of
active channels followed by a four value record for each channel. The
four values for each record are channel number, spread factor for this
channel, I value for this channel and the Q value for this channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:COMP:I:ACT?
MEAS:CDAN:IS2000:TRAC:POW:COMP:COMB:ACT?
MEAS:CDAN:IS2000:TRAC:POW:COMP:Q:ACT?
MEAS:CDAN:IS2000:TRAC:POW:COMP:IS2000:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value of these queries. These values are only accessible when the
CDMA standard is set to “IS-2000”, the measurement selected is
Complex Powerand the CD pwr unitis set to Relon the Reference
image of the CODE DOMAIN screen.
Chapter 1
253
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:I:ALL?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:COMBin ed :ALL?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:Q:ALL?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:IS2000:ALL?
IS-2000 only. These queries return the information necessary to
recreate the Code Domain trace when making a Complex Power
measurement. The returned entity consists of 128 four-value records for
each bar in the trace. The four values for each record are channel
number, I value for this channel, Q value for this channel and a flag
indicating that the next bar should be connected to this bar as part of a
wider supplemental channel.
If the selected location is part of a supplemental channel, all the Walsh
channels that comprise the supplemental channel will be returned.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:COMP:I:ALL?
MEAS:CDAN:IS2000:TRAC:POW:COMP:COMB:ALL?
MEAS:CDAN:IS2000:TRAC:POW:COMP:Q:ALL?
MEAS:CDAN:IS2000:TRAC:POW:COMP:IS2000:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return values for these queries. These values are only accessible when
the CDMA standard is set to “IS-2000”, the measurement selected is
Complex Power, and CD pwr unitis set to Relon the Reference image
of the CODE DOMAIN screen.
254
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:I[:VALu e]?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:COMBin ed [:VALu e]?
IS-2000 only. This query returns an array of 128 values that represents
the Spreader I Input Power of both IS-95 and IS-2000 channels relative
to the selected reference power value.
NOTE
The values returned represent the absolute power of individual Walsh
channels not the supplemental channels of which they may be a part.
The power of supplemental channels must be read directly from
I Pwr Levelfields on the CODE DOMAIN screen when Complex
Power measurement has been selected.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:COMP:I[:VAL]?
MEAS:CDAN:IS2000:TRAC:POW:COMP:COMB[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:POW:COMP:I[:VAL]? and
MEAS:CDAN:IS2000:TRAC:POW:COMP:COMB[:VAL]? returns
information (top set of bars) displayed for the Complex Power
measurement when CD pwr unit is set to Rel on the Reference
menu on the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000”.
Chapter 1
255
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:Q[:VALu e]?
:CDANa lyzer :IS2000:TRACe:P OWer :COMP lex:IS2000?
IS-2000 only. These commands query and return an array of 128 values
that represents Spreader Input Q Power relative to the selected
reference channel power.
NOTE
The values returned represent the absolute power of individual Walsh
channels not the supplemental channels of which they may be a part.
The power of supplemental channels must be read directly from
the Q Pwr Level field on the CODE DOMAIN screen when Complex
Power measurement has been selected.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:COMP:Q[:VAL]?
MEAS:CDAN:IS2000:TRAC:POW:COMP:IS2000[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:POW:COMP:Q[:VAL]? and
MEAS:CDAN:IS2000:TRAC:POW:COMP:IS2000[:VAL]? displays
information (bottom set of bars) for the Complex Power measurement
when the CD pwr unit is set to Rel on the Reference menu on the
CODE DOMAIN screen when the CDMA standard is set to “IS-2000”.
:CDANa lyzer :IS2000:TRACe:P OWer :NOISe:ACTive?
IS-2000 only. This query returns the active channel information for
theCode Domain trace when making a Power and Noise measurement.
The return value consists of an integer representing the number of
active channels followed by a four value record for each channel. The
four values for each record are channel number, spread factor for this
channel, Power for this channel and Noise for this channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:NOIS:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value for this query. The return information is only accessible
when the CDMA standard is set to “IS-2000”, the measurement selected
is Power and Noise, and CD pwr unitis set to Relon the Reference
image of the CODE DOMAIN screen.
256
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :NOISe:ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power and Noise measurement.
The return consists of 128 four value records for each bar in the trace.
The four values for each record are channel number, Power for this
channel, Noise for this channel a flag indicating that the next bar
should be connected to this bar as part of a wider supplemental
channel.
If the selected location is part of a supplemental channel, all the Walsh
channels that comprise the supplemental channel and the total power
and noise value for the supplemental channel will be returned.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:NOIS:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value for this query. The return information is only accessible
when the CDMA standard is set to “IS-2000”, the measurement selected
is Power and Noise, and CD pwr unitis set to Relon the Reference
image of the CODE DOMAIN screen.
:CDANa lyzer :IS2000:TRACe:P OWer :NOISe[:VALu e]?
IS-2000 only. This query returns an array of 128 values that represents
the noise values relative to the selected reference channel power.
NOTE
The values returned represent the relative noise power of individual
Walsh channels not the supplemental channels of which they may be a
part. The noise levels of supplemental channels must be read directly
from the Noise Lvlvalue on the Code Domain Analyzer screen when
the Power & Noise measurement has been selected.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:NOIS[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:POW:NOIS[:VAL]? displays information
(hashed part of each bar) for the power and noise measurement when
the CD pwr unit is set to Relon the Reference menu of the CODE
DOMAIN screen when the CDMA standard is set to “IS-2000”.
Chapter 1
257
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :P OWer :ACTive?
IS-2000 only. This query returns the active channel information for
theCode Domain trace when making a Power and Noise measurement.
The return value consists of an integer representing the number of
active channels followed by a four value record for each channel. The
four values for each record are channel number, spread factor for this
channel, Power for this channel and Noise for this channel.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:POW:ACT?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value for this query. The return information is only accessible
when the CDMA standard is set to “IS-2000”, the measurement selected
is Power and Noise, and CD pwr unitis set to Relon the Reference
image of the CODE DOMAIN screen.
:CDANa lyzer :IS2000:TRACe:P OWer :P OWer :ALL?
IS-2000 only. This query returns the information necessary to recreate
the Code Domain trace when making a Power and Noise measurement.
The return consists of 128 four value records for each bar in the trace.
The four values for each record are channel number, Power for this
channel, Noise for this channel a flag indicating that the next bar
should be connected to this bar as part of a wider supplemental
channel.
If the selected location is part of a supplemental channel, all the Walsh
channels that comprise the supplemental channel will be returned total
power and noise value for the supplemental channel will be returned.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:POW:ALL?
Scr een /field eq u iva len t
There are no fields on the CODE DOMAIN screen equivalent to the
return value for this query. The return information is only accessible
when the CDMA standard is set to “IS-2000”, the measurement selected
is Power and Noise, and CD pwr unitis set to Relon the Reference
image of the CODE DOMAIN screen.
258
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:CDANa lyzer :IS2000:TRACe:P OWer :P OWer [:VALu e]?
IS-2000 only. This query returns an array of 128 values that represent
the channel power relative to the selected reference channel power in a
Power & Noise measurement.
NOTE
The values returned represent the relative power of individual Walsh
channels not the supplemental channels of which they may be a part.
The power of supplemental channels in a Power & Noise measurement
must be read directly from the Marker Lvlvalue on the Code Domain
Analyzer screen.
Syn t a x
MEAS:CDAN:IS2000:TRAC:POW:POW[:VAL]?
Scr een /field eq u iva len t
MEAS:CDAN:IS2000:TRAC:POW:POW[:VAL]? displays information
(top value of each bar) for the power and noise measurement when the
CD pwr unit is set to Relon the Reference menu of the CODE
DOMAIN screen when the CDMA standard is set to “IS-2000”.
:DEC:AMP S| TACS:NBITs?
These commands set/query the number of bits measured by the
signaling decoder in AMPS-TACS mode.
Syn t a x
MEAS:DEC:AMPS:NBIT?
E xa m p le
MEAS:DEC:AMPS:NBIT? !returns an integer value reporting the
number of bits measured by the signaling unit.
For example, if the Signaling Decoder displays a value of 928
in the Num of Bits field of the SIGNAL DECODER screen, the
value 928 will be returned by the query.
Scr een /field eq u iva len t
MEAS:DEC:AMPS:NBIT? reads the Num of Bitsmeasurement field
on the SIGNALING DECODER screen when the Modefield is set to
AMPS-TACS.
Chapter 1
259
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:AMP S| TACS:CDATa ?
This command queries the decoded data for the control channel.
Syn t a x
MEAS:DEC:AMPS:CDAT?
E xa m p le
MEAS:DEC:AMPS:CDAT? !returns a quoted string reporting the
decoded data obtained from the control channel measured by
the signaling unit.
For example, the Signaling Decoder reads the control channel
and returns the data as shown:
09A15386CDA286604938B128063FD5F8
030078ECDBED872DABF0D308A1718FDB
685461FC0C2130410982E2DAE08C0300
54D0D9B450C08231AFD909BED8C840C0
The information received is the same as that displayed in the
Data (hex) field of the SIGNALING DECODER screen.
Scr een /field eq u iva len t
MEAS:DEC:AMPS:CDAT? reads the Data (hex)measurement field on
the SIGNALING DECODER screen when the Modefield is set to
AMPS-TACS, and the Channelfield is set to Cntl.
260
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:AMP S| TACS:DATA?
This command queries the decoded data for the voice channel.
Syn t a x
MEAS:DEC:AMPS:DATA?
E xa m p le
MEAS:DEC:AMPS:DATA? !returns a quoted string reporting the
decoded data obtained from the voice channel measured by the
signaling unit.
For example, the Signaling Decoder reads the voice channel
and returns the data as depicted below:
09A15386CDA286604938B128063FD5F8
030078ECDBED872DABF0D308A1718FDB
685461FC0C2130410982E2DAE08C0300
54D0D9B450C08231AFD909BED8C840C0
The information received is the same as that displayed in the
Data (hex) field of the SIGNALING DECODER screen.
Scr een /field eq u iva len t
MEAS:DEC:AMPS:DATA? reads the Data (hex)measurement field on
the SIGNALING DECODER screen when the Modefield is set to
AMPS-TACS, and the Channelfield is set to Voice.
:DEC:DTMF :LOW:F REQu en cy:ABSolu te <m ea s cm n d >
:DEC:DTMF :LOW:F REQu en cy:ABSolu te?
These command set/query the frequency of the low tone in the DTMF
pair. The MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the low tone.
Syn t a x
MEAS:DEC:DTMF:LOW:FREQ:ABS
MEAS:DEC:DTMF:LOW:FREQ:ABS? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:LOW:FREQ:ABS? reads the Lo Tonecolumn on the
SIGNALING DECODER screen. The Modefield must be set to DTMFand
the upper subfield of the Lo Tonefield must be set to Freq.
Chapter 1
261
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:DTMF :LOW:F REQu en cy:ERRor <m ea s cm n d >
:DEC:DTMF :LOW:F REQu en cy:ERRor ?
These commands set/query the frequency error of the low tone in the
DTMF pair. The MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq Err ’
command must be used to display the frequency error of the low tone.
Syn t a x
MEAS:DEC:DTMF:LOW:FREQ:ERR
MEAS:DEC:DTMF:LOW:FREQ:ERR? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:LOW:FREQ:ERR? reads the Lo Tonecolumn on the
SIGNALING DECODER screen. The Modefield must be set to DTMFand
the upper subfield of the Lo Tonefield must be set to Frq Err.
:DEC:DTMF :LOW:F REQu en cy:DISP la y <st r in g>
:DEC:DTMF :LOW:F REQu en cy:DISP la y?
These command set/query the display mode of the low tone in the
DTMF pair.
Syn t a x
MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq’
‘Frq Err’
MEAS:DEC:DTMF:LOW:FREQ:ERR?
Scr een /field eq u iva len t
MEAS:DEC:DTMF:LOW:FREQ:DISP controls the upper subfield of the
Lo Tonefield on the SIGNALING DECODER screen.
262
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:DTMF :HIGH :F REQu en cy:ABSolu te <m ea s cm n d >
:DEC:DTMF :HIGH :F REQu en cy:ABSolu te?
These command set/query the frequency of the high tone in the DTMF
pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Freq’ command must
be used to display the absolute frequency of the high tone.
Syn t a x
MEAS:DEC:DTMF:HIGH:FREQ:ABS
MEAS:DEC:DTMF:HIGH:FREQ:ABS? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:HIGH:FREQ:ABS? reads the Hi Tonecolumn on
the SIGNALING DECODER screen. The Modefield must be set to DTMF
and the upper subfield of the Hi Tonefield must be set to Freq.
:DEC:DTMF :HIGH :F REQu en cy:ERRor <m ea s cm n d >
:DEC:DTMF :HIGH :F REQu en cy:ERRor ?
These command set/query the frequency error of the high tone in the
DTMF pair. The MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Frq Err ’
command must be used to display the frequency error of the high tone.
Syn t a x
MEAS:DEC:DTMF:HIGH:FREQ:ERR
MEAS:DEC:DTMF:HIGH:FREQ:ERR? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:HIGH:FREQ:ERR? reads the Hi Tonecolumn on
the SIGNALING DECODER screen. The Modefield must be set to DTMF
and the upper subfield of the Hi Tonefield must be set to Frq Err.
Chapter 1
263
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:DTMF :HIGH :F REQu en cy:DISP la y <str in g>
:DEC:DTMF :HIGH :F REQu en cy:DISP la y?
These command set/query the display mode of the high tone in the
DTMF pair.
Syn t a x
MEAS:DEC:DTMF:HIGH:FREQ:DISP ‘Freq’
‘Frq Err’
MEAS:DEC:DTMF:HIGH:FREQ:ERR?
Scr een /field eq u iva len t
MEAS:DEC:DTMF:HIGH:FREQ:DISP controls the upper subfield of
the Hi Tonefield on the SIGNALING DECODER screen.
:DEC:DTMF :TIME :ON <m ea s cm n d >
:DEC:DTMF :TIME :ON?
These command set/query the timing of the DTMF frequencies.
Syn t a x
MEAS:DEC:DTMF:TIME:ON
MEAS:DEC:DTMF:TIME:ON? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:TIME:ON? reads the On Timecolumn on the
SIGNALING DECODER screen when the Modefield is set to DTMF.
:DEC:DTMF :TIME :OF F <m ea s cm n d >
:DEC:DTMF :TIME :OF F ?
These command set/query the timing of the DTMF frequencies.
Syn t a x
MEAS:DEC:DTMF:TIME:OFF
MEAS:DEC:DTMF:TIME:OFF? !returns up to 20 real values
Scr een /field eq u iva len t
MEAS:DEC:DTMF:TIME:OFF? reads the Off Timecolumn on the
SIGNALING DECODER screen when the Modefield is set to DTMF.
264
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:DTMF :SYMBol?
These command set/query the symbol number assigned by the encoder
for each of the DTMF tones. As each tone is analyzed, the symbol that
represents each tone is returned as a quoted string.
Syn t a x
MEAS:DEC:DTMF:SYMB? !returns a quoted string
Scr een /field eq u iva len t
MEAS:DEC:DTMF:SYMB? reads the Symcolumn on the SIGNALING
DECODER screen when the Modefield is set to DTMF.
:DEC:F GENer a tor :F REQu en cy <m ea s cm n d >
:DEC:F GENer a tor :F REQu en cy?
These commands set/query the frequency of the signal generated by the
function generator.
Syn t a x
MEAS:DEC:FGEN:FREQ <meas cmnd>
MEAS:DEC:FGEN:FREQ? !returns and integer value
Scr een /field eq u iva len t
MEAS:DEC:FGEN:FREQ? reads the Frequencymeasurement field on
the SIGNALING DECODER screen when the Modefield is set to Func
Gen.
:DEC:NAMP s| NTACs:NBITs <m ea s cm n d >
:DEC:NAMP s| NTACs:NBITs?
These commands set/query the number of bits measured by the
signaling decoder in NAMP-NTAC mode.
Syn t a x
MEAS:DEC:NAMP:NBIT <meas cmnd>
MEAS:DEC:NAMP:NBIT? !returns and integer value
Scr een /field eq u iva len t
MEAS:DEC:NAMP:NBIT? reads the Num of Bitsmeasurement field
on the SIGNALING DECODER screen when the Modefield is set to
NAMP-NTAC.
Chapter 1
265
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP s| NTACs:RECC:DATA?
This command reads the decoded RECC data, serially, as it received.
Syn t a x
MEAS:DEC:NAMP:RECC:DATA? !returns a quoted string
Scr een /field eq u iva len t
MEAS:DEC:NAMP:CDAT? reads the RECC Data (hex)measurement
field on the SIGNALING DECODER screen when the Modefield is set
to NAMP-NTAC, the Measure field is set to Data and the Channel field is
set to Cntl.
:DEC:NAMP s| NTACs:RVC:DATA?
This command reads the decoded RVC data, serially, as it is received.
Syn t a x
MEAS:DEC:NAMP:RVC:DATA? !returns a quoted string
Scr een /field eq u iva len t
MEAS:DEC:NAMP:RVC:DATA? reads the RVC Data (hex)
measurement field on the SIGNALING DECODER screen when the
Modefield is set to NAMP-NTAC, the Measurefield is set to Dataand the
Channelfield is set to Voice.
:DEC:NAMP s| NTACs:DSAT:DATA?
This command reads the decoded DSAT/DST data, serially, as it is
received.
Syn t a x
MEAS:DEC:NAMP:DSAT:DATA? !returns a quoted string
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DSAT:DATA? reads the DSAT/DST (hex)
measurement field on the SIGNALING DECODER screen when the
Modefield is set to NAMP-NTAC, the Measure field is set to DSAT and the
Channel field is set to Voice.
266
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP :DTMF :LOW:F R EQu en cy:ABSolu t e <m ea s cm n d >
:DEC:NAMP :DTMF :LOW:F R EQu en cy:ABSolu t e?
These commands set/query the frequency of the low tone in the DTMF
pair. The MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Freq’ command must
be used to display the absolute frequency of the low tone.
Syn t a x
MEAS:DEC:NAMP:DTMF:LOW:FREQ:ABS
MEAS:DEC:NAMAP:DTMF:LOW:FREQ:ABS? !returns up to 19 real
values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:LOW:FREQ:ABS? reads the Lo Tone
column on the SIGNALING DECODER screen when the Modefield is
set to NAMP-NTAC, the Measurefield is set to DTMF, and the upper
subfield of the Lo Tonefield is set to Freq, and the Channelfield is set
to Voice.
:DEC:NAMP :DTMF :LOW:F R EQu en cy:ERRor <m ea s cm n d >
:DEC:NAMP :DTMF :LOW:F R EQu en cy:ERRor ?
These commands set/query the frequency error of the low tone in the
DTMF pair. The MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Frq Err ’
command must be used to display the frequency error of the low tone.
Syn t a x
MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR
MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR? !returns up to 19 real
values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:LOW:FREQ:ERR? reads the Lo Tone
column on the SIGNALING DECODER screen when Modefield is set to
NAMP-NTAC, the Measurefield is set to DTMF, and the upper subfield of
the Lo Tonefield is set to Frq Err, and the Channelfield is set to
Voice.
Chapter 1
267
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP :DTMF :LOW:DISP la y <str in g>
:DEC:NAMP :DTMF :LOW:DISP la y?
These commands set/query the display mode of the low tone in the
DTMF pair.
Syn t a x
MEAS:DEC:NAMP:DTMF:LOW:DISP ‘Freq’
‘Frq Err’
MEAS:DEC:NAMP:DTMF:LOW:ERR?
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:LOW:DISP controls the upper subfield of
the Lo Tonefield on the SIGNALING DECODER screen when the Mode
field is set NAMP-NTACand the Measurefield is set to DTMF, and the
Channelfield is set to Voice.
:DEC:NAMP :DTMF :HIGH:F R EQu en cy:ABSolu t e <m ea s cm n d >
:DEC:NAMP :DTMF :HIGH:F R EQu en cy:ABSolu t e?
These commands set/query the frequency of the high tone in the DTMF
pair. The MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Freq’ command
must be used to display the absolute frequency of the high tone.
Syn t a x
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS? !returns up to 19 real
values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ABS? reads the Hi Tone
column on the SIGNALING DECODER screen when the Modefield is
set NAMP-NTAC, the Measurefield is set to DTMF, and the upper subfield
of the Hi Tonefield is set to Freq, and the Channelfield is set to Voice.
268
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP :DTMF :HIGH:F R EQu en cy:ERRor <m ea s cm n d >
:DEC:NAMP :DTMF :HIGH:F R EQu en cy:ERRor ?
These commands set/query the frequency error of the high tone in the
DTMF pair. The MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Frq Err ’
command must be used to display the frequency error of the high tone.
Syn t a x
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR? !returns up to 19 real
values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR? reads the Hi Tone
column on the SIGNALING DECODER screen when the Modefield is
set NAMP-NTAC, the Measurefield is set to DTMF, and the upper subfield
of the Hi Tonefield is set to Frq Err, and the Channelfield is set to
Voice.
:DEC:NAMP :DTMF :HIGH:DISP la y <str in g>
:DEC:NAMP :DTMF :HIGH:DISP la y?
These commands set/query the display mode of the high tone in the
DTMF pair.
Syn t a x
MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Freq’
‘Frq Err’
MEAS:DEC:NAMP:DTMF:HIGH:DISP:ERR?
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:HIGH:DISP controls the upper subfield of
the Hi Tonefield on the SIGNALING DECODER screen when the Mode
field is set NAMP-NTACand the Measurefield is set to DTMF, and the
Channelfield is set to Voice.
Chapter 1
269
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP :DTMF :TIME:ON <m ea s cm n d >
:DEC:NAMP :DTMF :TIME:ON?
These commands set/query the timing of the DTMF frequencies.
Syn t a x
MEAS:DEC:NAMP:DTMF:TIME:ON
MEAS:DEC:NAMP:DTMF:TIME:ON? !returns up to 19 real values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:TIME:ON? reads the On Timecolumn on the
SIGNALING DECODER screen when the Modefield is set NAMP-NTAC
and the Measurefield is set to DTMF, and the Channelfield is set to
Voice.
:DEC:NAMP :DTMF :TIME:OF F <m ea s cm n d >
:DEC:NAMP :DTMF :TIME:OF F ?
These commands set/query the timing of the DTMF frequencies.
Syn t a x
MEAS:DEC:NAMP:DTMF:TIME:OFF
MEAS:DEC:NAMP:DTMF:TIME:OFF? !returns up to 19 real values
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:TIME:OFF? reads the Off Timecolumn on
the SIGNALING DECODER screen when the Modefield is set
NAMP-NTACand the Measurefield is set to DTMF, and the Channelfield is
set to Voice.
270
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP :DTMF :SYMBol?
This command queries the symbol number assigned by the encoder for
each of the DTMF tones. As each tone is analyzed, the symbol that
represents each tone is returned as a quoted string.
Syn t a x
MEAS:DEC:NAMP:DTMF:SYMB? !returns a quoted string
Scr een /field eq u iva len t
MEAS:DEC:NAMP:DTMF:SYMB? reads the Symcolumn on the
SIGNALING DECODER screen when the Modefield is set NAMP-NTAC
and the Measurefield is set to DTMF, and the Channelfield is set to
Voice.
:IQP Lot [:DISP la y]:I?
This query returns an array of 384 values representing the I
(horizontal) values for each decision point. The values are scaled to
match the display (1 = average power of the RF Carrier).
Syn t a x
MEAS:IQPL[:DISP]:I?
Scr een /field eq u iva len t
MEAS:IQPL[:DISP]:I? does not correspond to any field in the IQPLOT
screen but represents the horizontal values for the decision points on
the plot.
:IQP Lot [:DISP la y]:Q?
This command queries and returns an array of 384 values representing
the Q (vertical) values for each decision point. The values are scaled to
match the display (1 = average power of the RF Carrier).
Syn t a x
MEAS:IQPL[:DISP]:Q?
Scr een /field eq u iva len t
MEAS:IQPL[:DISP]:Q? does not correspond with a field in the IQPLOT
screen but represents the vertical decision points shown on the plot.
Chapter 1
271
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:OSCilloscop e:MARKer :LEVel:AM <m ea s cm n d >
:OSCilloscop e:MARKer :LEVel:AM?
These commands set/query the AM depth measurement at the
oscilloscope’s marker position. For this measurement to be valid, you
must have AM Mod or AM Demod chosen as the audio input (see
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:OSC:MARK:LEV:AM <meas cmd>
MEAS:OSC:MARK:LEV:AM?
E xa m p le
MEAS:OSC:MARK:LEV:AM?
Scr een /field eq u iva len t
MEAS:OSC:MARK:LEV:AM? reads the Lvlmeasurement field on the
SCOPE screen. The AF Anl Infield on the AF ANALYZER screen must
be set to AM Modor AM Demodto measure AM depth in this field.
272
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:OSCilloscop e:MARKer :LEVel:F M <m ea s cm n d >
:OSCilloscop e:MARKer :LEVel:F M?
These commands set/query the FM deviation measurement at the
oscilloscope’s marker position. For this measurement to be valid, you
must have FM Mod or FM Demod chosen as the audio input (see
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:OSC:MARK:LEV:FM <meas cmd>
MEAS:OSC:MARK:LEV:FM?
E xa m p le
MEAS:OSC:MARK:LEV:FM?
Scr een /field eq u iva len t
MEAS:OSC:MARK:LEV:FM? reads the Lvlmeasurement field on the
SCOPE screen. The AF Anl Infield on the AF ANALYZER screen must
be set to FM Modor FM Demodto measure FM deviation in this field.
Chapter 1
273
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:OSCilloscop e:MARKer :LEVel:VOLTs <m ea s cm n d >
:OSCilloscop e:MARKer :LEVel:VOLTs?
These commands set/query the voltage measurement at the
oscilloscope’s marker position. For this measurement to be valid, you
must have Audio In, Audio Out, Ext Mod, or SSB Demod chosen as the
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:OSC:MARK:LEV:VOLT <meas cmd>
MEAS:OSC:MARK:LEV:VOLT?
E xa m p le
MEAS:OSC:MARK:LEV:VOLT?
Scr een /field eq u iva len t
MEAS:OSC:MARK:LEV:VOLT? reads the Lvlmeasurement field on
the SCOPE screen. The AF Anl Infield on the AF ANALYZER screen
must be set to Audio In, Audio Out, or Ext Mod, SSB Demodto measure
voltage in this field.
:OSCilloscop e:MARKer :TIME <m ea s cm n d >
:OSCilloscop e:MARKer :TIME?
These commands set/query the time elapsed from the trigger event to
the marker location.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:OSC:MARK:TIME <meas cmd>
MEAS:OSC:MARK:TIME? !returns a real number
E xa m p le
MEAS:OSC:MARK:TIME? !displays the measurement
Scr een /field eq u iva len t
MEAS:OSC:MARK:TIME? reads the Timefield on the Markermenu of
the SCOPE screen.
274
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:OSCilloscop e:TRACe?
This command returns an array of 417 real values, corresponding to
points on the oscilloscope’s display. 0 corresponds to the first value (left
side of trace display) and 416 is the last value (right side of the trace
display).
Syn t a x
MEAS:OSC:TRAC?
Scr een /field eq u iva len t
MEAS:OSC:TRAC has no corresponding field on the SCOPE screen.
:RF Req u en cy:SELect <str in g>
:RF Req u en cy:SELect?
These commands set/query the RF measurements for the RF analyzer.
Syn t a x
MEAS:RFR:SEL <meas cmd>
MEAS:RFR:SEL?
E xa m p le
MEAS:RFR:SEL ‘Frequency’
‘Freq Error’
MEAS:RFR:SEL?
Scr een /field eq u iva len t
MEAS:RFR:SEL selects which measurement, Frequencyor Freq
Erroris displayed the RF ANALYZER screen. These measurements are
also displayed on the RF GENERATOR and AF ANALYZER screens.
Chapter 1
275
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:RF Req u en cy:F R EQu en cy:ABSolu te <m ea s cm n d >
:RF Req u en cy:F R EQu en cy:ABSolu te?
These commands set/query the RF frequency measurement when the
:RFR:SEL ‘Frequency’ command is used.
Syn t a x
:RFR:FREQ:ABS <meas syntax>
:RFR:FREQ:ABS?
Scr een /field eq u iva len t
MEAS:RFR:FREQ:ABS? reads the Frequencymeasurement field on
the RF ANALYZER screen. This measurement is also displayed on the
RF GENERATOR and AF ANALYZER screens.
:RF Req u en cy:F R EQu en cy:ERRor <m ea s cm n d >
:RF Req u en cy:F R EQu en cy:ERRor ?
These commands set/query the RF frequency error measurement when
the :RFR:SEL ‘Freq Err ’ command is used.
Syn t a x
:RFR:FREQ:ERR <meas syntax>
:RFR:FREQ:ERR?
Scr een /field eq u iva len t
MEAS:RFR:FREQ:ERR? reads the Freq Errormeasurement field on
the RF ANALYZER screen. This measurement is also displayed on the
RF GENERATOR and AF ANALYZER screens.
276
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:RF Req u en cy:P OWer <m ea s cm n d >
:RF Req u en cy:P OWer ?
These commands set/query the transmitter power measurement. The
measurement is either peak or sampled, as determined by the
RFAN:PME:DET command on page 305.
Syn t a x
MEAS:RFR:POW <meas cmd>
MEAS:RFR:POW? !returns real value
E xa m p le
MEAS:RFR:POW? !returns the value
Scr een /field eq u iva len t
MEAS:RFR:POW? reads the TX Powermeasurement field on the RF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and AF ANALYZER screens.
Chapter 1
277
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:SANa lyzer :MAR Ker :DELTa :F R EQu en cy <m ea s cm n d >
:SANa lyzer :MAR Ker :DELTa :F R EQu en cy?
These commands set/query the delta marker frequency measurement.
This measurement is the frequency of the delta marker minus the
frequency of the normal marker. If the delta marker is to the right of
the normal marker, the delta frequency is positive. If the delta marker
is to the left of the normal marker, the delta frequency is negative.
The units for this measurement are GHz, MHz, kHz, and Hz.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:SAN:MARK:DELT:FREQ <meas cmd>
MEAS:SAN:MARK:DELT:FREQ? !returns real value
E xa m p le
SAN:MARK:PEAK
MEAS:SAN:MARK:DELT:FREQ? !returns the value
Scr een /field eq u iva len t
MEAS:SAN:MARK:DELT:FREQ? reads the Delta Mrkr, Freq
measurement field on the SPEC ANL screen when Norm/Deltafield is
set to Deltaon the Markercontrols menu.
278
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:SANa lyzer :MAR Ker :DELTa :LE Vel <m ea s cm n d >
:SANa lyzer :MAR Ker :DELTa :LE Vel?
These commands set/query the delta marker level measurement. This
measurement is the level of the normal marker minus the frequency of
the delta marker in dBm. If the delta marker is higher than normal
marker, the delta level is positive. If the delta marker is lower than the
normal marker, the delta level is negative.
The units for this measurement are dB. (There is a percent unit
available; however, since the spectrum analyzer level is always
displayed on a logarithmic scale, linear units are inappropriate.)
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:SAN:MARK:DELT:LEV <meas cmd>
MEAS:SAN:MARK:DELT:LEV? !returns real value
E xa m p le
MEAS:SAN:MARK:DELT:LEV? !returns the value
Scr een /field eq u iva len t
MEAS:SAN:MARK:DELT:LEV? reads the Delta Mrkr, Lvl
measurement field on the SPEC ANL screen when Norm/Deltafield is
set to Deltaon the Markercontrols menu.
Chapter 1
279
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:SANa lyzer :MAR Ker [:NORMa l]:F R EQu en cy <m ea s cm n d >
:SANa lyzer :MAR Ker [:NORMa l]:F R EQu en cy?
These commands set/query the frequency at the marker on the
spectrum analyzer ’s trace.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:SAN:MARK:NORM:FREQ <meas cmd>
MEAS:SAN:MARK:NORM:FREQ? !returns real value
E xa m p le
MEAS:SAN:MARK:NORM:FREQ? !returns the value
Scr een /field eq u iva len t
MEAS:SAN:MARK[:NORM]:FREQ? reads the Freqmeasurement field
on the SPEC ANL screen.
:SANa lyzer :MAR Ker [:NORMa l]:LE Vel <m ea s cm n d >
:SANa lyzer :MAR Ker [:NORMa l]:LE Vel?
These commands set/query the RF level at the marker on the spectrum
analyzer ’s trace.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:SAN:MARK:NORM:LEV <meas cmd>
MEAS:SAN:MARK:NORM:LEV? !returns real value
E xa m p le
MEAS:SAN:MARK:NORM:LEV? !returns the value
Scr een /field eq u iva len t
MEAS:SAN:MARK[:NORM]:LEV? reads the Lvlmeasurement field on
the SPEC ANL.
280
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
MEASure subsystem
:SANa lyzer :TRACe?
This command returns an array of 417 real values, corresponding to
points on the spectrum analyzer ’s display. 0 corresponds to the first
value (left side of trace display) and 416 is the last value (right side of
the trace display).
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syn t a x
MEAS:SAN:TRAC?
E xa m p le
MEAS:SAN:TRAC? !returns the array
Scr een /field eq u iva len t
MEAS:SAN:TRAC has no corresponding field on the SPEC ANL screen.
Chapter 1
281
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Multiple Real Number Setting Syntax
Mu ltip le Rea l Nu m ber Sett in g Syn ta x
This section defines the syntax to be used with commands that require
the Real Number Setting Syntax, but allow multiple numbers to be set
in one command.
This format is typically used for entering values that are grouped in
rows or columns.
The format is the same as for the Real Number Setting Syntax, except
that each real number is preceded by an integer that identifies the
relative position in the list of numbers.
Syn ta x
:Previous Syntax <integer_value>,<real_value>[display unit_of_measure]
!integer_value is the position, real_value is the actual value
:Previous Syntax? <integer_value> !returns the value of the position
:Previous Syntax:DUNits <integer_value>,<display unit_of_measure>
!sets the units
:Previous Syntax:DUNits? <integer_value> !returns the display units
:Previous Syntax:UNits <integer_value>,<GPIB unit_of_measure>
:Previous Syntax:UNits? <integer_value> !Displays the GPIB units
:Previous Syntax:INCRement <integer_value>,<incr_value>[display
unit_of_measure]
!increments the present value
:Previous Syntax:INCRement <integer_value>,UP|DOWN
:Previous Syntax:INCRement? <integer_value> !returns the incr. value
:Previous Syntax:MODe <integer_value>,LINear|LOGarithm
!sets mode of the command
:Previous Syntax:MODe? <integer_value> !returns mode (LIN or LOG)
:Previous Syntax:MULTiply <integer_value>!multiplies current setting
:Previous Syntax:DIVide <integer_value>!divides current setting by 10
282
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Number Measurement Syntax
Nu m ber Mea su r em en t Syn ta x
This syntax is used with measurement commands. It applies to both
real and integer values.
This syntax is typically used with subsystems like the MEASure
subsystem/
Syn ta x
:Previous Syntax:AUNits <GPIB units> !sets the GPIB units
:Previous Syntax:AUNits !returns the GPIB units
:Previous Syntax:AVERage[:VALue] <real_value>
!sets the number of averages
:Previous Syntax:AVERage? !returns the number of averages
:Previous Syntax:AVERage:RESet !resets the number of averages to 1
:Previous Syntax:AVERage:STATe 1|ON
:Previous Syntax:AVERage:STATe 0|OFF
:Previous Syntax:AVERage:STATe? !returns 1 or 0
:Previous Syntax:DUNits <display unit_of_measure>
!sets the disp. units
:Previous Syntax:DUNits? !returns the display units
:Previous Syntax:HLIMit[:VALue] <real_value>[<units>]
!sets the value of the High Limit for a measurement display
:Previous Syntax:HLIMit? !returns the High Limit setting
:Previous Syntax:HLIMit:DUNits <units> !display units
:Previous Syntax:HLIMit:DUNits? !returns the display units
:Previous Syntax:HLIMit:EXCeeded?
!returns 1 or 0 to indicate if the High Limit was exceeded
:Previous Syntax:HLIMit:RESet !resets the limit
:Previous Syntax:HLIMit:STATe 1|ON !sets state of the limit
:Previous Syntax:HLIMit:STATe 0|OFF !sets state of the limit
:Previous Syntax:HLIMit:STATe? !returns 1 or 0
:Previous Syntax:LLIMit[:VALue] <real_value>[<units>]
!sets the value of the Low Limit for a measurement display
:Previous Syntax:LLIMit? !returns the Low Limit setting
:Previous Syntax:LLIMit:DUNits <units> !display units
:Previous Syntax:LLIMit:DUNits? !returns the display units
:Previous Syntax:LLIMit:EXCeeded?
!returns 1 or 0 to indicate if the Low Limit was exceeded
:Previous Syntax:LLIMit:RESet !resets the limit
Chapter 1
283
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Number Measurement Syntax
:Previous Syntax:LLIMit:STATe 1|ON !sets state of the limit
:Previous Syntax:LLIMit:STATe 0|OFF !sets state of the limit
:Previous Syntax:LLIMit:STATe? !returns 1 or 0
:Previous Syntax:METer[:STATe] 1|ON
:Previous Syntax:METer[:STATe] 0|OFF
:Previous Syntax:METer[:STATe]? !returns 1 or 0
:Previous Syntax:METer:HEND|LEND <real value><units>
:Previous Syntax:METer:HEND|LEND? !returns real value
:Previous Syntax:METer:HEND|LEND:DUNits <units>
:Previous Syntax:METer:HEND|LEND:DUNits?
:Previous Syntax:METer:INTerval <integer value>
:Previous Syntax:METer:INTerval? !returns integer value
:Previous Syntax:REFerence[:VALue] <real_value>[<units>]
!sets the value of the reference for a measurement display
:Previous Syntax:REFerence? !returns the reference setting
:Previous Syntax:REFerence:DUNits <units> !display units
:Previous Syntax:REFerence:DUNits? !returns the display units
:Previous Syntax:REFerence:STATe 1|ON !sets state of the reference
:Previous Syntax:REFerence:STATe 0|OFF !sets state of the reference
:Previous Syntax:REFerence:STATe? !returns 1 or 0
:Previous Syntax:STATe 1|ON
:Previous Syntax:STATe 0|OFF
:Previous Syntax:STATe? ! returns 1 or 0
:Previous Syntax:UNits <GPIB unit_of_measure>
!sets the GPIB units
:Previous Syntax:UNits? !returns the GPIB units
E xa m p le 1-2
E xa m p les
RFAN:FREQ 850.35MHz !sets the frequency to 850.35 MHz
RFAN:FREQ? !returns the frequency
RFAN:FREQ:DUNits GHz !changes the units to GigaHertz
RFAN:FREQ:INCR 3.5MHz !increments frequency by 3.5 MHz
RFAN:FREQ:INCR? !returns the increment value
RFAN:FREQ:MULT !multiplies the current frequency by 10
RFAN:FREQ:MULT !multiplies the current frequency by 10
!Note that :STAT is not valid for RFAN:FREQ
284
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
OSCilloscop e su bsystem
:CONTr ol
:CONTr ol?
These commands set/query the oscilloscope’s control menus.
Syn t a x
OSC:CONT ‘Main’
‘Trigger’
‘Marker’
OSC:CONT?
E xa m p le
OSC:CONT ‘Trigger’ !displays the Trigger menu of the
oscilloscope
Scr een /field eq u iva len t
OSC:CONT controls the Controlsfield of the SCOPE screen.
:MARKer :NP Ea k
This command moves the marker to the minimum value of the average
level of the display.
This command has no query.
Syn t a x
OSC:MARK:NPE !moves the marker to the minimum
Scr een /field eq u iva len t
OSC:MARK:NPE controls the Marker To Peak-field on the Marker
menu of the SCOPE screen.
Chapter 1
285
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:MARKer :P P Ea k
This command moves the marker to the maximum value of the average
level of the display.
This command has no query.
Syn t a x
OSC:MARK:PPE !moves the marker to the maximum
Scr een /field eq u iva len t
OSC:MARK:PPE controls the Marker To Peak+field on the Marker
menu of the SCOPE screen.
:MARKer :P OSition <r ea l n u m b er >
:MARKer :P OSition ?
These commands set/query the marker the number specified of scale
divisions from the left side of the screen.
This measurement utilizes the Real Number Setting Syntax, but does
not use the :STATe command
Syn t a x
OSC:MARK:POS <real number> !values 0 to 10.00
OSC:MARK:POS? !returns the present position value
E xa m p le
OSC:MARK:POS 4.5 !positions the marker 4.5 divisions from the
left
Scr een /field eq u iva len t
OSC:MARK:POS controls the Positionfield on the Markermenu of the
SCOPE screen.
286
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:SCALe:TIME <str in g>
:SCALe:TIME?
These commands set/query the horizontal sweep time per division.
Syn t a x
OSC:SCAL:TIME ‘200 ms’
‘100 ms’
‘50 ms’
‘20 ms’
‘10 ms’
‘5 ms’
‘2 ms’
‘1 ms’
‘500 us’
‘200 us’
‘100 us’
‘50 us’
‘20 us’
‘10 us’
‘5 us’
‘2 us’
‘1 us’
OSC:SCAL:TIME? !returns present value
E xa m p le
OSC:SCAL:TIME ‘2 ms’ !sets scale to 2 ms
Scr een /field eq u iva len t
OSC:SCL:TIME controls the Time/divfield on the Mainmenu of the
SCOPE screen.
Chapter 1
287
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:SCALe:VERTica l:AM <str in g>
:SCALe:VERTica l:AM?
These commands set/query the vertical axis amplitude per division
when AM Mod or AM Demod is selected as the audio source (see
Syn t a x
OSC:SCAL:VERT:AM ‘50%’
‘20%’
‘10%’
‘5%’
‘2%’
‘1%’
‘0.5%’
‘0.2%’
‘0.1%’
‘0.05%’
OSC:SCAL:VERT:AM?
E xa m p le
OSC:SCAL:VERT:AM ‘20%’!sets the vert scale
Scr een /field eq u iva len t
OSC:SCAL:VERT:AM controls the Vert/divfield on the Mainmenu of
the SCOPE screen when the AF Anl Infield on the AF ANALYZER
screen is set to AM Modor AM Demod.
288
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:SCALe:VERTica l:F M <str in g>
:SCALe:VERTica l:F M?
These commands set/query the vertical axis amplitude per division
when FM Mod or FM Demod is selected as the audio source (see
Syn t a x
OSC:SCAL:VERT:FM ‘50 kHz’
‘20 kHz’
‘10 kHz’
‘5 kHz’
‘2 kHz’
‘1 kHz’
‘500 Hz’
‘200 Hz’
‘100 Hz’
‘50 Hz’
‘20 Hz’
‘10 Hz’
OSC:SCAL:VERT:FM?
E xa m p le
OSC:SCAL:VERT:FM ‘20 kHz’
Scr een /field eq u iva len t
OSC:SCAL:VERT:FM controls the Vert/divfield on the Mainmenu of
the SCOPE screen when the AF Anl Infield on the AF ANALYZER
screen is set to FM Modor FM Demod.
Chapter 1
289
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:SCALe:VERTica l:OF F Set <r ea l n u m ber >
:SCALe:VERTica l:OF F Set?
These commands set/query the vertical scale (DC) offset of the vertical
axis of the oscilloscope display. This moves the signal up to four
divisions up or down with respect to the oscilloscope’s fixed center line.
but does not use the :STATe command.
Syn t a x
OSC:SCAL:VERT:OFFS <real number>
OSC:SCAL:VERT:OFFS?
E xa m p le
OSC:SCAL:VERT:OFFS 2.5 !moves the signal 2.5 divisions
Scr een /field eq u iva len t
OSC:SCAL:VERT:OFFS controls the Vert Offsetfield on the Main
menu of the SCOPE screen.
290
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:SCALe:VERTica l:VOLTs <str in g>
:SCALe:VERTica l:VOLTs?
These commands set/query the vertical scale of the oscilloscope display.
This command is valid when the AFAN:INP command specifies one of
the following sources: Audio Out, Audio In, Ext Mod, or SSB Demod.
Syn t a x
OSC:SCAL:VERT:VOLT ‘20 V’
‘10 V’
‘5 V’
‘2 V’
‘1 V’
‘500 mv’
‘200 mv’
‘100 mv’
‘50 mv’
‘20 mv’
‘10 mv’
‘5 mv’
‘2 mv’
‘1 mv’
‘500 uv’
‘200 uv’
‘100 uv’
‘50 uv’
‘20 uv’
OSC:SCAL:VERT:VOLT?
E xa m p le
OSC:SCAL:VERT:VOLT ‘5 V’!sets scale to 5V per division
Scr een /field eq u iva len t
OSC:SCAL:VERT:VOLT controls the Vert/divfield on the Mainmenu
of the SCOPE screen when the AF Anl Infield on the AF ANALYZER
screen is set to Audio In, Audio Out, Ext Mod, or SSB Demod.
Chapter 1
291
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:TRIGger :LEVel <r ea l n u m ber >
:TRIGger :LEVel?
These commands set/query the level of the oscilloscope’s trigger.
but does not use the :STAT, :DUN, :UNIT, :INCR:MODE, :INCR:DUN,
commands.
Syn t a x
OSC:TRIG:LEV <real> !values
OSC:TRIG:LEV? !returns the level
E xa m p le
OSC:TRIG:LEV 0.4 !sets the level to 0.4 V
Scr een /field eq u iva len t
OSC:TRIG:LEV controls the upper subfield of the Level(div)field on
the Triggermenu of the SCOPE screen.
:TRIGger :MODE <str in g>
:TRIGger :MODE?
These commands set/query the retriggering mode of the trigger for the
oscilloscope. If ‘Cont’ is chosen, then the oscilloscope is triggering
continuously and is ready for another measurement after one has
finished. If ‘Single’ is chosen then the oscilloscope requires a trigger
command before making another measurement.
OSC:RESet is the trigger command for the oscilloscope.
Syn t a x
OSC:TRIG:MODE ‘Cont’
‘Single’
OSC:TRIG:MODE?
E xa m p le
OSC:TRIG:MODE ‘Single’ !sets mode to single trigger
Scr een /field eq u iva len t
OSC:TRIG:MODE controls the Cont/Singlefield on the Triggermenu
of the SCOPE screen.
292
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:TRIGger :DELa y <r ea l n u m ber >
:TRIGger :DELa y?
These commands set/query the trigger delay. Positive values delay the
trigger, negative values apply a pre-trigger function to each
measurement.
but does not use the :STAT, :DUN, :UNIT, :INCR:MODE, :INCR:DUN,
commands.
The valid range of the delay depends on the Time/div setting. See
OSC:SCAL:TIME to set the Time/div.
Syn t a x
OSC:TRIG:DEL <real> !values depend on Time/div
OSC:TRIG:DEL?
E xa m p le
OSC:TRIG:DEL 0.2 !sets to 0.2 units
Scr een /field eq u iva len t
OSC:TRIG:DEL controls the Trig-Delayfield on the Triggermenu of
the SCOPE screen.
:TRIGger :P RETr igger <r ea l n u m ber >
:TRIGger :P RETr igger ?
These commands set/query a pretrigger for each measurement.
but does not use the :STAT, :DUN, :UNIT, :INCR:MODE, :INCR:DUN,
commands.
Syn t a x
OSC:TRIG:PRET <real>
OSC:TRIG:PRET?
Scr een /field eq u iva len t
OSC:TRIG:PRET has no equivalent field on the SCOPE screen.
Chapter 1
293
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:TRIGger :RESet
This command triggers an oscilloscope measurement.
Syn t a x
OSC:TRIG:RES !triggers the oscilloscope
Scr een /field eq u iva len t
OSC:TRIG:RESet controls the Resetfield on the Triggermenu of the
SCOPE screen.
:TRIGger :SENSe <str in g>
:TRIGger :SENSe?
These commands set/query the desired edge of the trigger. ‘Pos’ triggers
the measurement on the positive-going edge of the input signal. ‘Neg’
triggers on the negative-going edge.
Syn t a x
OSC:TRIG:SENS ‘Pos’
‘Neg’
OSC:TRIG:SENS?
Scr een /field eq u iva len t
OSC:TRIG:SENS controls the Pos/Negfield on the Triggermenu of
the SCOPE screen.
:TRIGger :SOUR ce <str in g>
:TRIGger :SOUR ce?
These commands set/query the source of the trigger.
Syn t a x
OSC:TRIG:SOUR ‘Internal’
‘Ext(TTL)’
OSC:TRIG:SOUR?
Scr een /field eq u iva len t
OSC:TRIG:SOUR controls the Internalor the Ext (TTL)field on the
Triggermenu of the SCOPE screen.
294
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
OSCilloscope subsystem
:TRIGger :TYP E <str in g>
:TRIGger :TYP E?
These commands set/query how the trigger level is set. ‘Auto’ triggers a
measurement if a triggering signal is not detected within
approximately 50 ms of the last trigger. ‘Norm’ requires a specific
triggering signal before triggering.
Syn t a x
OSC:TRIG:TYPE ‘Auto’
‘Norm’
OSC:TRIG:TYPE?
Scr een /field eq u iva len t
OSC:TRIG:TYPE controls the Auto/Normfield on the Triggermenu of
the SCOPE screen.
Chapter 1
295
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
PROGram subsystem
P ROGr a m su bsystem
The Program subsystem provides a set of commands which allow an
external controller to generate and control an IBASIC program within
the Test Set.
These commands have no equivalent fields or screens.
[:SELected ]:DE F in e <p r ogr a m d a ta >
[:SELected ]:DE F in e?
PROG:SEL:DEF downloads an IBASIC program into the Test Set. The
query form returns the program. The program must be transferred as
IEEE 488.2 Arbitrary Block Program Data. Refer to the IEEE standard
488.2-1987 for detailed information on this data type.
[:SEL] is an optional portion of this command.
<program> is the actual program content
Syn t a x
PROG:SEL:DEF <#0><program><NL><END>
PROG:DEF <#0><program><NL><END>
[:SELected ]:DE Lete
[:SELected ]:DE Lete:ALL
These commands delete the IBASIC program currently loaded in the
Test Set.
Syn t a x
PROG:SEL:DEL
PROG:DEL !equivalent command
PROG:DEL:ALL !equivalent command
[:SELected ]:EXECu te
This command executes (from an IBASIC controller) an IBASIC
command in the Test Set’s built-in IBASIC controller.
Syn t a x
PROG:SEL:EXEC
PROG:EXEC !equivalent command
296
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
PROGram subsystem
[:SELected ]:STATe <va r ia ble>
[:SELected ]:STATe?
These commands set/query (from an external IBASIC controller) the
execution state of the IBASIC program currently loaded in the Test Set.
Syn t a x
PROG:SEL:STAT
PROG:SEL:STAT?
PROG:STAT !equivalent command
[:SELected ]:NUMBer <va r ia ble>(,<n va lu es>)
[:SELected ]:NUMBer ?
These commands set/query the value of numeric variables or arrays in
the IBASIC program currently loaded in the Test Set.
Syn t a x
PROG:SEL:NUMB <variable>,<nvalues>
PROG:SEL:NUMB?
PROG:NUMB <variable>,<nvalues> !equivalent command
[:SELected ]:STRin g <va r ia ble>(,<n va lu es>)
[:SELected ]:STRin g?
These commands set/query the value of string variables or arrays in the
IBASIC program currently loaded in the Test Set
Syn t a x
PROG:SEL:STR <variable>,<nvalues>
PROG:SEL:STR?
PROG:STR <variable>,<nvalues> !equivalent command
[:SELected ]:WAIT
[:SELected ]:WAIT?
Syn t a x
PROG:SEL:WAIT
PROG:SEL:WAIT? !returns an integer value
Chapter 1
297
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RAM Usage Information
RAM Usa ge In for m a tion
The number of bytes reported to the remote interface is different than
that reported on the screen when using the IB_UTILS program. This is
because to calculate kilobytes, the total is divided by 1024 before it is
displayed on the screen.
SP EC:R AMDISKALLOC?
SPEC:RAMDISKALLOC? returns the total RAM disk space that has
been used to store programs or test setups in the Test Set.
Scr een /F ield E q u iva len t
SPEC:RAMDISKALLOC? reads RAM Disk Allocations:, found in the
Test Set’s (ROM) IB_UTILS, RAM USAGE program.
SP EC:R AMF ORIBASIC?
SPEC:TOTALUSERRAM? returns the approximate amount of RAM
available in the Test Set for IBASIC programs.
Scr een /F ield E q u iva len t
SPEC:TOTALUSERRAM? reads the Approximate RAM Available
for IBasic:field that can be found in the Test Set’s (ROM) IB_UTILS,
RAM USAGE program.
SP EC:SAVEREGALLOC?
SPEC:SAVEREGALLOC? returns the total RAM space that has been
used for save registers in the Test Set.
Scr een /F ield E q u iva len t
SPEC:SAVEREGALLOC? reads the Save Register Allocations:
field that can be found in the Test Set’s (ROM) IB_UTILS, RAM USAGE
program.
SP EC:TOTALUSERRAM?
SPEC:TOTALUSERRAM? returns the total RAM installed in the Test
Set.
Scr een /F ield E q u iva len t
SPEC:TOTALUSERRAM? reads the Total RAM Installed:field that
can be found in the Test Set’s (ROM) IB_UTILS, RAM USAGE program.
298
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
Real Number Setting Syntax
R ea l Nu m b er Set tin g Syn t a x
This syntax is for setting real values in commands. It is to be used with
commands that require the Real Number Setting Syntax.
An example of a command that requires the Real Number Setting
Syn ta x
:Previous Syntax <real_value>[display unit_of_measure]
:Previous Syntax? !returns the value
:Previous Syntax:DUNits <display unit_of_measure> !sets the units
:Previous Syntax:DUNits? !returns the display units
:Previous Syntax:UNits <GPIB unit_of_measure>
:Previous Syntax:UNits? !Displays the GPIB units
:Previous Syntax:INCRement <incr_value>[display unit_of_measure]
!increments the present value
:Previous Syntax:INCRement? !returns the increment value
:Previous Syntax:INCRement UP|DOWN !increments up or down
:Previous Syntax:STATe 1|ON
:Previous Syntax:STATe 0|OFF
:Previous Syntax:STATe? ! returns 1 or 0
:Previous Syntax:MODe LINear|LOGarithm
!sets mode of the command
:Previous Syntax:MODe? !returns mode (LIN or LOG)
:Previous Syntax:MULTiply !multiplies current setting by 10
:Previous Syntax:DIVide !divides current setting by 10
E xa m p le 1-3
E xa m p les
RFAN:FREQ 850.35MHz !sets the frequency to 850.35 MHz
RFAN:FREQ? !returns the frequency
RFAN:FREQ:DUNits GHz !changes the units to GigaHertz
RFAN:FREQ:INCR 3.5MHz !increments frequency by 3.5 MHz
RFAN:FREQ:INCR? !returns the increment value
RFAN:FREQ:MULT !multiplies the current frequency by 10
RFAN:FREQ:MULT !multiplies the current frequency by 10
!Note that :STAT is not valid for RFAN:FREQ
Chapter 1
299
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
[REGister] subsystem
[REGister ] su bsystem
Register Subsystem contains the save/recall commands used in the
Save/Recall registers.
:CLEa r <in teger or str in g>
This command clears the register defined by the integer value or string
argument.
Syn t a x
:CLE ‘<string>’
!clears the register named ‘string’
:CLE ‘<integer value>’ !clears the numbered register
REG:CLE ‘<string>’
!equivalent command
Scr een /field eq u iva len t
This command corresponds to deleting a save/recall register using the
front panel keys. See the Reference Guide for more information about
using the Save and Recall keys.
:CLEa r :ALL
This command clears all registers.
Syn t a x
:CLE:ALL
REG:CLE:ALL !equivalent command
Scr een /field eq u iva len t
This command corresponds to the *Clr All* command in the save/recall
menu (accessed with the front-panel keys.)
300
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
[REGister] subsystem
:RECa ll <in t eger or str in g>
This command recalls the register defined by the integer value or string
argument
Syn t a x
:REC ‘<string>’
!recalls the register named ‘string’
:REC ‘<integer value>’ !recalls the numbered register
REG:REC ‘<string>’
!equivalent command
Scr een /field eq u iva len t
This command corresponds to recalling a save/recall register using the
front panel keys. See the Reference Guide for more information about
using the Save and Recall keys.
:RECa ll:LIST?
This command lists the save/recall registers that have been named.
Syn t a x
REG:REC:LIST?
:REC:LIST? !equivalent command
Scr een /field eq u iva len t
:REC:LIST? has no equivalent field.
:SAVE <in teger or st r in g>
This command saves the register defined by the integer value or string
argument.
Syn t a x
:SAVE ‘<string>’
!recalls the register named ‘string’
:SAVE ‘<integer value>’ !recalls the numbered register
REG:SAVE ‘<string>’
!equivalent command
Scr een /field eq u iva len t
This command corresponds to saving a save/recall register using the
front panel keys. See the Reference Guide for more information about
using the Save and Recall keys.
Chapter 1
301
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
[REGister] subsystem
:SAVE:LIST?
:SAVE:LIST? lists the save/recall registers that have been named.
Syn t a x
REG:SAVE:LIST?
:SAVE:LIST? !equivalent command
Scr een /field eq u iva len t
:SAVE:LIST? has no equivalent field.
302
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFANalyzer subsystem
RFANa lyzer su bsystem
:ATTen u a tor <str in g>
:ATTen u a tor ?
These commands set/query the amount of input attenuation in the path
of the selected input port. CONF:ATT:MODE ‘Auto’ overrides this
command.
Syn t a x
RFAN:ATT ‘0 dB’
‘5 dB’
‘10 dB’
‘15 dB’
‘20 dB’
‘25 dB’
‘30 dB’
‘35 dB’
RFAN:ATT?
Scr een /field eq u iva len t
RFAN:ATT controls to the lower subfield of the Input Attenfield on
the RF ANALYZER screen.
:ATTen u a tor :MODE <str in g>
:ATTen u a tor :MODE?
These commands set/query the RF autoranging mode.
CONF:ATT:MODE ‘Hold’ overrides this command.
Syn t a x
RFAN:ATT:MODE ‘Auto’
‘Hold’
RFAN:ATT:MODE?
Scr een /field eq u iva len t
RFAN:ATT:MODE corresponds to the Auto/Holdsubfield of the Input
Attenfield on the RF ANALYZER screen
Chapter 1
303
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFANalyzer subsystem
:F REQu en cy <r ea l n u m ber >
:F REQu en cy?
These commands set/query the tune frequency for the RF analyzer. This
command requires that the CONF:RFD ‘Freq’ command is used.
but does not use the :STATe command.
Syn t a x
RFAN:FREQ <real>
RFAN:FREQ?
Scr een /field eq u iva len t
RFAN:FREQ corresponds to the Tune Freqfield on the RF ANALYZER
screen.
[:F REQu en cy]:GTIMe <r ea l n u m ber >
[:F REQu en cy]:GTIMe?
These commands set/query the gate time for the RF Frequency counter.
Syn t a x
RFAN:FREQ:GTIM <real>
RFAN:FREQ:GTIM?
Scr een /field eq u iva len t
RFAN:FREQ:GTIM controls the RF Cnt Gatefield on the RF
ANALYZER screen.
304
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFANalyzer subsystem
:IF BW <str in g>
:IF BW?
These commands set/query the IF filter bandwidth.
Syn t a x
RFAN:IFBW ‘15 kHz’
‘230 kHz’
RFAN:IFBW?
Scr een /field eq u iva len t
RFAN:IFBW controls the IF Filterfield on the RF ANALYZER
screen.
:INP u t <str in g>
:INP u t?
These commands set/query the RF input port.
Note: Some measurements can only be made on one port.
Syn t a x
RFAN:INP ‘RF In’
‘Ant’
RFAN:INP?
Scr een /field eq u iva len t
RFAN:INP controls the RF Input Portfield on the RF ANALYZER.
This field is also displayed on the SPEC ANL, CODE DOM, and CDMA
ANALYZER screens.
:P MEa su r em en t:DETector <st r in g>
:P MEa su r em en t:DETector ?
These commands set/query the analog TX power measurement method.
Syn t a x
RFAN:PME:DET ‘Peak’
‘Sample’
RFAN:PME:DET?
Scr een /field eq u iva len t
RFAN:PME:DET controls the TX Pwr Measfield on the RF ANALYZER
screen.
Chapter 1
305
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFANalyzer subsystem
:P MEa su r em en t:ZERO
This command zeroes the TX power measurement.
Syn t a x
RFAN:PME:ZERO
Scr een /field eq u iva len t
RFAN:PME:ZERO controls the TX Pwr Zerofield on the RF
ANALYZER screen.
:P MEa su r em en t:ZERO:MODE
:P MEa su r em en t:ZERO:MODE?
This command sets/queries the zeroing mode of the TX power
measurement. ‘Auto’ periodically zeroes power automatically during
operation. ‘Manual’ requires you to use the :PME:ZERO command to
zero power.
Syn t a x
RFAN:PME:ZERO:MODE ‘Auto’
‘Manual’
RFAN:PME;ZERO:MODE?
Scr een /field eq u iva len t
RFAN:PME:ZERO:MODE controls the Auto Zerofield on the RF
ANALYZER screen.
:SENSitivity <str in g>
:SENSitivity?
:SENS sets/queries the RF input sensitivity.
Syn t a x
RFAN:SENS ‘Normal’
‘High’
RFAN:SENS?
Scr een /field eq u iva len t
RFAN:SENS controls the Sensitivityfield on the RF ANALYZER
screen. This field is also displayed on the SPEC ANL screen’s
Auxiliarymenu.
306
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFANalyzer subsystem
:SQUelch <str in g>
:SQUelch ?
:SQU sets/queries the squelch control setting.
Syn t a x
RFAN:SQU ‘Pot’
‘Open’
‘Fixed’
RFAN:SQU?
Scr een /field eq u iva len t
RFAN:SQU controls the Squelchfield on the RF ANALYZER screen.
Chapter 1
307
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFGenerator subsystem
RF Gen er a tor su bsystem
The RF generator subsystem controls the functions of the RF
GENERATOR screen.
:AMP Lit u d e <r ea l n u m ber >
This command sets/queries the amplitude of the RF generator.
This field also controls the RF generator viewed in the spectrum
analyzer.
Syn t a x
RFG:AMPL <real>
RFG:AMPL?
Scr een /field eq u iva len t
RFG:AMPL controls the Amplitudefield on the RF GENERATOR
screen. This field is also displayed on the spectrum analyzer ’s RF Gen
menu.
:ATTen u a tor <str in g>
:ATTen u a tor ?
These commands set/query the RF generator ’s attenuator hold function.
Attenuator hold prevents the fixed RF output attenuators from
switching in and out, eliminating the loss of the output signal as the
level is changed.
Syn t a x
RFG:ATT ‘On’
‘Off’
RFG:ATT?
Scr een /field eq u iva len t
RFG:ATT controls the Atten Holdfield on the RF GENERATOR
screen.
308
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFGenerator subsystem
:CHANn el <str in g>
:CHANn el?
These commands set/query the RF channel number. Channel tuning
must be enabled (CONF:RFD ‘Chan’). You must also choose the correct
channel standard (CONF:RFCS <string>).
Syn t a x
RFG:CHAN <integer>
RFG:CHAN?
Scr een /F ield E q u iva len t
RFG:CHAN controls the upper subfield of the RF Channelfield on the
RF GENERATOR screen when the RF Displayfield on the
INSTRUMENT CONFIGURE screen is set to Chan.
:F M:COUP lin g <str in g>
:F M:COUP lin g?
These commands set/query the coupling between the MODULATION
IN port and the RF generator ’s FM modulator.
Syn t a x
RFG:FM:COUP ‘AC’
‘DC’
RFG:FM:COUP?
Scr een /field eq u iva len t
RFG:FM:COUP controls the FM Couplingfield on the RF
GENERATOR screen.
:F M:DCZer o
This command zeroes any dc bias that exists when the
RFG:FM:COUP ‘DC’ command is used and FM is turned on using the
AFG1:DEST ‘FM’ and AFG1:FM:STAT ON commands (AFG2 could be
used instead of AFG1).
Syn t a x
RFG:FM:DCZ
Scr een /field eq u iva len t
RFG:FM:DCZ controls the DC FM Zerofield on the RF GENERATOR
screen.
Chapter 1
309
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFGenerator subsystem
:F REQu en cy <r ea l n u m ber >
:F REQu en cy?
These commands set/query the frequency of the RF generator. The Test
Set must first be in frequency tuning mode. (See CONF:RFD ‘Freq’ on
but does not use the :STATe command.
Syn t a x
RFG:FREQ <real number>
RFG:FREQ?
Scr een /field eq u iva len t
RFG:FREQ controls the RF Gen Freqfield on the RF GENERATOR
screen, when in frequency tuning mode. This field is also displayed on
the spectrum analyzer ’s RF Genmenu.
:MODu la tion :AOUT <st r in g>
:MODu la tion :AOUT?
These commands set/query the coupling between the demodulated
audio and the AUDIO OUT port.
Syn t a x
RFG:MOD:AOUT ‘AC’
‘DC’
RFG:MOD:AOUT?
Scr een /field eq u iva len t
RFG:MOD:AOUT controls the Audio Outfield on the RF GENERATOR
screen.
310
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFGenerator subsystem
:MODu la tion :EXTer n a l:AM <r ea l n u m ber >
:MODu la tion :EXTer n a l:AM?
These commands set/query the AM sensitivity of the RF generator
when AM is applied through the modulation input port. The modulation
input must be set to AM.
Syn t a x
:MOD:EXT:AM <real number>
:MOD:EXT:AM?
Scr een /field eq u iva len t
RFG:MOD:EXT:AM controls the lower subfield of the Mod In Tofield
on the RF GENERATOR screen when AM (/Vpk)has been selected in
the upper subfield.
:MODu la tion :EXTer n a l:DE STin a t ion <str in g>
:MODu la tion :EXTer n a l:DE STin a t ion ?
These commands set/query the type of modulation applied to the RF
generator.
This command works with :MOD:EXT:AM and :MOD:EXT:FM to set
the level of modulation used.
Syn t a x
:MOD:EXT:DEST ‘AM (/Vpk)’
‘FM (/Vpk)’
:MOD:EXT:DEST?
Scr een /field eq u iva len t
RFG:MOD:DEST:EXT controls the upper subfield of Mod In Tofield on
the RF GENERATOR screen.
Chapter 1
311
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
RFGenerator subsystem
:MODu la tion :EXTer n a l:F M <r ea l n u m ber >
:MODu la tion :EXTer n a l:F M?
These commands set/query the FM deviation of the RF generator when
FM is applied through the modulation input port. The modulation input
must be set to FM.
Syn t a x
:MOD:EXT:FM <real number>
:MOD:EXT:FM?
Scr een /field eq u iva len t
RFG:MOD:EXT:FM controls the lower subfield of the Mod In Tofield
on the RF GENERATOR screen when FM (/Vpk)is selected in the
upper subfield.
:OUTP u t <str in g>
:OUTP u t?
These commands set/query the RF output port.
Syn t a x
RFG:OUTP ‘RF Out’
‘Dupl’
RFG:OUTP?
Scr een /field eq u iva len t
RFG:OUTP controls the Output Portfield on the RF GENERATOR
screen. This field is also displayed on the spectrum analyzer ’s RF Gen
menu when the spectrum analyzer is in fixed mode.
312
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
SANa lyzer su bsystem
:ATTen u a tor <str in g>
:ATTen u a tor ?
These commands set/query the attenuator setting for the input port.
Syn t a x
SAN:ATT ‘0 dB’
‘5 dB’
‘10 dB’
‘15 dB’
‘20 dB’
‘25 dB’
‘30 dB’
‘35 dB’
SAN:ATT?
Scr een /field eq u iva len t
SAN:ATT controls the lower subfield of the Input Attenfield on the
SPEC ANL screen’s Auxilliarymenu.
:ATTen u a tor :MODE <str in g>
:ATTen u a tor :MODE?
These commands set/query the mode of the attenuator.
Syn t a x
SAN:ATT:MODE ‘Auto’
‘Hold’
SAN:ATT:MODE?
Scr een /field eq u iva len t
SAN:ATT:MODE controls the Auto/Holdsubfield of the Input Atten
field on the SPEC ANL screen’s Auxilliarymenu.
Chapter 1
313
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:CF Req u en cy <r ea l n u m ber >
:CF Req u en cy?
These commands set/query the center frequency of the spectrum
analyzer ’s display.
but does not use the :STATe command.
Syn t a x
SAN:CFR <real number>
SAN:CFR?
Scr een /field eq u iva len t
SAN:CFR controls the Center Freqfield on the SPEC ANL screen’s
Mainmenu.
:CONTr ol <str in g>
:CONTr ol?
These commands set/query the Controlsmenu for the spectrum
analyzer. You can choose controls for the main, RF generator, marker,
trigger, mask, or auxilliary functions.
Syn t a x
SAN:CONT ‘Main’
‘RF Gen’
‘Marker’
‘Auxiliary’
‘Mask’
SAN:CONT?
Scr een /field eq u iva len t
SAN:CONT controls the Controlsfield on the SPEC ANL screen.
314
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:DISP la y:SCALe <str in g>
:DISP la y:SCALe?
These commands set/query the vertical scale of the spectrum analyzer
display.
Syn t a x
SAN:DISP:SCAL ‘1 dB/div’
‘2 dB/div’
‘10 dB/div’
SAN:DISP:SCAL?
Scr een /field eq u iva len t
SAN:DISP:SCAL controls the lower subfield of the Sensitivityfield
on the SPEC ANL screen’s Auxilliarymenu.
:INP u t <str in g>
:INP u t?
These commands set/query the input to the spectrum analyzer.
Syn t a x
SAN:INP ‘RF In’
‘Ant’
SAN:INP?
Scr een /field eq u iva len t
SAN:INP controls the RF In/Antfield on Mainmenu of the SPEC ANL
screen.
:MARKer :DELTa :CF R equ en cy
This command sets the delta marker at the center frequency of the
spectrum analyzer ’s measurement trace.
Syn t a x
SAN:MARK:DELT:CFR
Scr een /field eq u iva len t
SAN:MARK:DELT:CFR controls the Marker To, Center Freqfield on
the Markermenu of the SPEC ANL screen when the Norm/Deltafield
is set to Delta.
Chapter 1
315
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MARKer :DELTa :NP Ea k
This command sets the delta marker at the next peak of the spectrum
analyzer display.
Syn t a x
SAN:MARK:DELT:NPE
Scr een /field eq u iva len t
SAN:MARK:DELT:NPE controls the Marker To, Next Peakfield on
the Markermenu of the SPEC ANL screen when the Norm/Deltafield
is set to Delta.
:MARKer :DELTa :NP Level <r ea l n u m b er >
:MARKer :DELTa :NP Level?
These commands set/query the level of the next peak signal at the delta
marker.
but does not use the :STATe command.
Syn t a x
SAN:MARK:DELT:NPL <real number>
SAN:MARK:DELT:NPL?
Scr een /field eq u iva len t
SAN:MARK:DELT:NPL controls the Levelfield on the SPEC ANL
screen when the Norm/Deltafield is set to Delta.
:MARKer :DELTa :P EAK
This command moves the delta marker to the highest peak of the
signals on the spectrum analyzer display trace.
Syn t a x
SAN:MARK:DELT:PEAK
Scr een /field eq u iva len t
SAN:MARK:DELT:PEAK controls the Marker To, Peakfield on the
Markermenu of the SPEC ANL screen when the Norm/Deltafield is set
to Delta.
316
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MARKer :DELTa :P OSit ion <r ea l n u m ber >
:MARKer :DELTa :P OSit ion ?
These commands set/query the position of the delta marker on the
spectrum analyzer.
but does not use the :STATe command.
Syn t a x
SAN:MARK:DELT:POS <real number>
SAN:MARK:DELT:POS?
Scr een /field eq u iva len t
SAN:MARK:DELT:POS controls the Positionfield on the Marker
menu of the SPEC ANL screen when the Norm/Deltafield is set to
Delta.
:MARKer :DELTa :RLEVel
:MARK:DELT:RLEV moves the signal at the delta marker to the
reference level position of the spectrum analyzer.
Syn t a x
SAN:MARK:DELT:RLEV
Scr een /field eq u iva len t
SAN:MARK:DELT:RLEV controls the Marker To, Ref Levelfield on
the Markermenu of the SPEC ANL screen when the Norm/Deltafield
is set to Delta.
Chapter 1
317
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MARKer :MODE <str in g>
:MARKer :MODE?
These commands set/query the whether the marker is in normal mode
or delta mode.
In normal mode the spectrum analyzer measures the frequency and
level at the marker ’s position. In delta mode the spectrum analyzer
displays a second marker and measures the difference (frequency and
level) from the “normal” marker position. The marker is positioned
Syn t a x
SAN:MARK:MODE ‘Norm’
‘Delta’
SAN:MARK:MODE?
Scr een /field eq u iva len t
SAN:MARK:MODE controls the Norm/Deltafield on the Markermenu
of the SPEC ANL screen.
:MARKer [:NORMa l]:CF R equ en cy
This command moves the marker to the center frequency of the
spectrum analyzer ’s measurement trace.
Syn t a x
SAN:MARK:NORM:CFR
Scr een /field eq u iva len t
SAN:MARK:NORM:CFR controls the Marker To, Center Freqfield
on the Markermenu of the SPEC ANL screen when Norm/Deltafield is
set to Normon the Markercontrols menu.
318
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MARKer [:NORMa l]:NP Ea k
This command moves the marker to the next peak of the spectrum
analyzer ’s measurement trace.
Syn t a x
SAN:MARK:NORM:NPE
Scr een /field eq u iva len t
SAN:MARK:NORM:NPE controls the Marker To, Next Peakfield on
the Markermenu of the SPEC ANL screen when Norm/Deltafield is set
to Normon the Markercontrols menu.
:MARKer [:NORMa l]:NP Level <r ea l n u m ber >
:MARKer [:NORMa l]:NP Level?
These commands set/query the level of the next peak signal.
but does not use the :STATe command.
Syn t a x
SAN:MARK:NORM:NPL <real number>
SAN:MARK:NORM:NPL?
Scr een /field eq u iva len t
SAN:MARK:NORM:NPL controls the Levelfield on the SPEC ANL
screen when Norm/Deltafield is set to Normon the Markercontrols
menu.
:MARKer [:NORMa l]:P EAK
This command moves the marker to the highest peak of the signals on
the spectrum analyzer display trace.
Syn t a x
SAN:MARK:NORM:PEAK
Scr een /field eq u iva len t
SAN:MARK:NORM:PEAK controls the Marker To, Peakfield on the
Markermenu of the SPEC ANL screen when Norm/Deltafield is set to
Normon the Markercontrols menu.
Chapter 1
319
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MARKer [:NORMa l]:P OSition <r ea l n u m ber >
:MARKer [:NORMa l]:P OSition ?
These commands set/query the position of the marker on the spectrum
analyzer.
but does not use the :STATe command.
Syn t a x
SAN:MARK:NORM:POS <real number>
SAN:MARK:NORM:POS?
Scr een /field eq u iva len t
SAN:MARK:NORM:POS controls the Positionfield on the Marker
menu of the SPEC ANL screen when Norm/Deltafield is set to Normon
the Markercontrols menu.
:MARKer :REF m od e
:MARKer :REF m od e?
These commands set/query the spectrum analyzer ’s reference marker
mode when using the delta markers.
When the Ref Mrkrfield is set to Hold, the reference marker is frozen
at its current position (frequency and level) regardless of changes in the
signal level or center frequency.
When you switch from Holdto Norm, the reference marker will stay at
its current horizontal setting (frequency), but will track the level of the
incoming signal.
Syn t a x
SAN:MARK:REF ‘Norm’
‘Hold’
SAN:MARK:REF?
Scr een /field eq u iva len t
SAN:MARK:REF controls the Ref Mrkrfield on the Markermenu of
the SPEC ANL.
320
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:BEEP
:MASK:BEEP ?
This command turns the failure indicator beeper off or on.
Syn t a x
SAN:MASK:BEEP ‘On’
‘Off’
SAN:MASK:BEEP?
Scr een /field eq u iva len t
SAN:MASK:BEEP controls the Mask Beepfield on the Maskmenu of
the SPEC ANL screen.
:MASK:DISP la y
:MASK:DISP la y?
This command sets/queries which masks will be displayed: upper,
lower, both, or none (Off).
Syn t a x
SAN:MASK:DISP ‘UpperOnly’
‘LowerOnly’
‘Both’
‘Off’
SAN:MASK:DISP?
Scr een /field eq u iva len t
SAN:MASK:DISP controls the Displayfield on the Maskmenu of the
SPEC ANL screen.
:MASK:F IXed :LOWer :P OINts:NUMBer
:MASK:F IXed :LOWer :P OINts:NUMBer ?
This command sets/queries the number of points in the lower spectrum
analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:FIX:LOW:POIN:NUMB <integer 1-15>
SAN:MASK:FIX:LOW:POIN:NUMB?
Scr een /field eq u iva len t
SAN:MASK:FIX:LOW:POIN:NUMB controls the #Ptsfield on the Mask
menu of the SPEC ANL screen when the Edit Maskfield is set to
Lower, and the Mask Typefield is set to Fix.
Chapter 1
321
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:F IXed :LOWer :P OINts:EDIT
This command selects/queries the point number to edit on the lower
spectrum analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:FIX:LOW:POIN:EDIT <integer 1-15>
SAN:MASK:FIX:LOW:POIN:EDIT?
Scr een /field eq u iva len t
SAN:MASK:FIX:LOW:POIN:EDIT controls the EditPtfield on the
Maskmenu of the SPEC ANL screen when the Edit Maskfield is set to
Lower, and the Mask Typefield is set to Fix.
:MASK:F IXed :LOWer :P OINts:LEVEL1(th r ou gh LEVEL15)
:MASK:F IXed :LOWer :P OINts:LEVEL1? (th r ou gh LEVEL15)
These commands set/query the level of the defined points on the lower
spectrum analyzer mask.
Syn t a x
To define the levels in a four-point mask:
SAN:MASK:FIX:LOW:POIN:LEVEL1 <real number>
SAN:MASK:FIX:LOW:POIN:LEVEL2 <real number>
SAN MASK:FIX:LOW:POIN:LEVEL3 <real number>
SAN:MASK:FIX:LOW:POIN:LEVEL4 <real number>
SAN:MASK:FIX:LOW:POIN:LEVEL1?
Scr een /field eq u iva len t
SAN:MASK:FIX:LOW:POIN:LEVEL1 controls the Levelfield on the
Maskmenu of the SPEC ANL screen when the EditPtfield is set to 1,
the Edit Maskfield is set to Lower, and the Mask Typefield is set to
Fix.
322
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:F IXed :LOWer :P OINts:F REQu en cy1 (t h r ou gh F R EQ15)
:MASK:F IXed :LOWer :P OINts:F REQu en cy1? (th r ou gh F REQ15)
These commands set/query the frequency (Hz) of the defined points on
the lower spectrum analyzer mask.
The units for the mask are GHz, MHz, kHz, and Hz.
Syn t a x
To define the frequencies in a four-point mask:
SAN:MASK:FIX:LOW:POIN:FREQ1 <real number>
SAN:MASK:FIX:LOW:POIN:FREQ2 <real number>
SAN MASK:FIX:LOW:POIN:FREQ3 <real number>
SAN:MASK:FIX:LOW:POIN:FREQ4 <real number>
SAN:MASK:FIX:LOW:POIN:FREQ1?
Scr een /field eq u iva len t
SAN:MASK:FIX:LOW:POIN:FREQ1 controls the Freqfield on the Mask
menu of the SPEC ANL when the EditPtfield is set to 1, the Edit
Maskfield is set to Lower, and the Mask Typefield is set to Fix.
:MASK:F IXed :UP P er :P OINts:NUMBer
:MASK:F IXed :UP P er :P OINts:NUMBer ?
This command sets/queries the number of points in the upper spectrum
analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:FIX:UPP:POIN:NUMB <integer 1-15>
SAN:MASK:FIX:UPP:POIN:NUMB?
Scr een /field eq u iva len t
SAN:MASK:FIX:UPP:POIN:NUMB controls the #Ptsfield on the Mask
menu of the SPEC ANL screen when the Edit Maskfield is set to
Upper, and the Mask Typefield is set to Fix.
Chapter 1
323
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:F IXed :UP P er :P OINts:EDIT
:MASK:F IXed :UP P er :P OINts:EDIT?
This command selects/queries the point number to edit on the upper
spectrum analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:FIX:UPP:POIN:EDIT <integer 1-15>
SAN:MASK:FIX:UPP:POIN:EDIT?
Scr een /field eq u iva len t
SAN:MASK:FIX:UPP:POIN:EDIT controls the EditPtfield on the Mask
menu of the SPEC ANL screen when the Edit Maskfield is set to
Upper, and the Mask Typefield is set to Fix.
:MASK:F IXed :UP P er :P OINts:LEVEL1 (th r ou gh LEVEL15)
:MASK:F IXed :UP P er :P OINts:LEVEL1? (th r ou gh LEVEL15)
These commands set/query the level of the defined points on the upper
spectrum analyzer mask.
Syn t a x
To define the levels in a four-point mask:
SAN:MASK:FIX:UPP:POIN:LEVEL1 <real number>
SAN:MASK:FIX:UPP:POIN:LEVEL2 <real number>
SAN MASK:FIX:UPP:POIN:LEVEL3 <real number>
SAN:MASK:FIX:UPP:POIN:LEVEL4 <real number>
SAN:MASK:FIX:UPP:POIN:LEVEL1?
Scr een /field eq u iva len t
SAN:MASK:FIX:UPP:POIN:LEVEL1 controls the Levelfield on the
Maskmenu of the SPEC ANL screen when the EditPtfield is set to 1,
the Edit Maskfield is set to Upper, and the Mask Typefield is set to
Fix.
324
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:F IXed :UP P er :P OINts:F REQu en cy1 (th r ou gh F R EQ15)
:MASK:F IXed :UP P er :P OINts:F REQu en cy1? (t h r ou gh F REQ15)
These commands set/query the frequency (Hz) of the defined points on
the upper spectrum analyzer mask.
The units for the mask are GHz, MHz, kHz, and Hz.
Syn t a x
To define the frequencies in a four-point mask:
SAN:MASK:FIX:UPP:POIN:FREQ1 <real number>
SAN:MASK:FIX:UPP:POIN:FREQ2 <real number>
SAN MASK:FIX:UPP:POIN:FREQ3 <real number>
SAN:MASK:FIX:UPP:POIN:FREQ4 <real number>
SAN:MASK:FIX:UPP:POIN:FREQ1?
Scr een /field eq u iva len t
SAN:MASK:FIX:UPP:POIN:FREQ1 controls the Freqfield on the Mask
menu of the SPEC ANL when the EditPtfield is set to 1, the Edit
Maskfield is set to Upper, and the Mask Typefield is set to Fix.
:MASK:RELa tive:LOWer :P OINts:NUMBer
:MASK:RELa tive:LOWer :P OINts:NUMBer ?
This command sets/queries the number of points in the lower spectrum
analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:REL:LOW:POIN:NUMB <integer 1-15>
SAN:MASK:REL:LOW:POIN:NUMB?
Scr een /field eq u iva len t
SAN:MASK:REL:LOW:POIN:NUMB controls the #Ptsfield on the
Maskmenu of the SPEC ANL screen when the Edit Maskfield is set to
Lower, and the Mask Typefield is set to Rel.
Chapter 1
325
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:RELa tive:LOWer :P OINts:EDIT
:MASK:RELa tive:LOWer :P OINts:EDIT?
This command selects/queries the point number to edit on the lower
spectrum analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:REL:LOW:POIN:EDIT <integer 1-15>
SAN:MASK:REL:LOW:POIN:EDIT?
Scr een /field eq u iva len t
SAN:MASK:REL:LOW:POIN:EDIT controls the EditPtfield on the
Maskmenu of the SPEC ANL screen when the Edit Maskfield is set to
Lower, and the Mask Typefield is set to Rel.
:MASK:RELa tive:LOWer :P OINts:LE VEL1 (th r ou gh LEVEL15)
:MASK:RELa tive:LOWer :P OINts:LE VEL1? (th r ou gh LEVEL15)
These commands set/query the level of the defined points on the lower
spectrum analyzer mask (relative to the top line of the display (Ref
Level)).
Syn t a x
To define the levels in a four-point mask:
SAN:MASK:REL:LOW:POIN:LEVEL1 <real number>
SAN:MASK:REL:LOW:POIN:LEVEL2 <real number>
SAN MASK:REL:LOW:POIN:LEVEL3 <real number>
SAN:MASK:REL:LOW:POIN:LEVEL4 <real number>
SAN:MASK:REL:LOW:POIN:LEVEL1?
Scr een /field eq u iva len t
SAN:MASK:REL:LOW:POIN:LEVEL1 controls the Level Ofsfield on
the Maskmenu of the SPEC ANL screen when the EditPtfield is set to
1, the Edit Maskfield is set to Lower, and the Mask Typefield is set to
Rel.
326
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:RELa tive:LOWer :P OINts:F R EQu en cy1 (th r ou gh F REQ15)
:MASK:RELa tive:LOWer :P OINts:F R EQu en cy1? (th r ou gh F REQ15)
These commands set/query the frequency (Hz) of the defined points on
the lower spectrum analyzer mask (relative to the center line of the
display).
The units for the mask are GHz, MHz, kHz, and Hz.
Syn t a x
To define the frequencies in a four-point mask:
SAN:MASK:REL:LOW:POIN:FREQ1 <real number>
SAN:MASK:REL:LOW:POIN:FREQ2 <real number>
SAN MASK:REL:LOW:POIN:FREQ3 <real number>
SAN:MASK:REL:LOW:POIN:FREQ4 <real number>
SAN:MASK:REL:LOW:POIN:FREQ1?
Scr een /field eq u iva len t
SAN:MASK:REL:LOW:POIN:FREQ1 controls the Freq Ofsfield on the
Maskmenu of the SPEC ANL when the EditPtfield is set to 1, the Edit
Maskfield is set to Lower, and the Mask Typefield is set to Rel.
:MASK:RELa tive:UP P er :P OINts:NUMBer
:MASK:RELa tive:UP P er :P OINts:NUMBer ?
This command sets/queries the number of points in the upper spectrum
analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:REL:UPP:POIN:NUMB <integer 1-15>
SAN:MASK:REL:UPP:POIN:NUMB?
Scr een /field eq u iva len t
SAN:MASK:REL:UPP:POIN:NUMB controls the #Ptsfield on the Mask
menu of the SPEC ANL screen when the Edit Maskfield is set to
Upper, and the Mask Typefield is set to Rel.
Chapter 1
327
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:RELa tive:UP P er :P OINts:EDIT
This command selects/queries the point number to edit on the upper
spectrum analyzer mask. The maximum number is 15.
Syn t a x
SAN:MASK:REL:UPP:POIN:EDIT <integer 1-15>
SAN:MASK:REL:UPP:POIN:EDIT?
Scr een /field eq u iva len t
SAN:MASK:REL:UPP:POIN:EDIT controls the EditPtfield on the
Maskmenu of the SPEC ANL screen when the Edit Maskfield is set to
Upper, and the Mask Typefield is set to Rel.
:MASK:RELa tive:UP P er :P OINts:LEVEL1 (th r ou gh LEVE L15)
:MASK:RELa tive:UP P er :P OINts:LEVEL1? (th r ou gh LEVEL15)
These commands set/query the level of the defined points on the upper
spectrum analyzer mask.
Syn t a x
To define the levels in a four-point mask:
SAN:MASK:REL:UPP:POIN:LEVEL1 <real number>
SAN:MASK:REL:UPP:POIN:LEVEL2 <real number>
SAN MASK:REL:UPP:POIN:LEVEL3 <real number>
SAN:MASK:REL:UPP:POIN:LEVEL4 <real number>
SAN:MASK:REL:UPP:POIN:LEVEL1?
Scr een /field eq u iva len t
SAN:MASK:REL:UPP:POIN:LEVEL1 controls the Level Ofsfield on
the Maskmenu of the SPEC ANL screen when the EditPtfield is set to
1, the Edit Maskfield is set to Upper, and the Mask Typefield is set to
Rel.
328
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:MASK:RELa tive:UP P er :P OINts:F R EQu en cy1 (th r ou gh F REQ15)
:MASK:RELa tive:UP P er :P OINts:F R EQu en cy1? (th r ou gh F REQ15)
These commands set/query the frequency (Hz) of the defined points on
the upper spectrum analyzer mask.
The units for the mask are GHz, MHz, kHz, and Hz.
Syn t a x
To define the frequencies in a four-point mask:
SAN:MASK:REL:UPP:POIN:FREQ1 <real number>
SAN:MASK:REL:UPP:POIN:FREQ2 <real number>
SAN MASK:REL:UPP:POIN:FREQ3 <real number>
SAN:MASK:REL:UPP:POIN:FREQ4 <real number>
SAN:MASK:REL:UPP:POIN:FREQ1?
Scr een /field eq u iva len t
SAN:MASK:REL:UPP:POIN:FREQ1 controls the Freq Ofsfield on the
Maskmenu of the SPEC ANL when the EditPtfield is set to 1, the Edit
Maskfield is set to Upper, and the Mask Typefield is set to Rel.
:MASK:TYP E
:MASK:TYP E?
This command selects/queries the type of mask, fixed or relative. ‘Fixed’
sets the mask in absolute frequency and level points. ‘Relative’ sets the
mask relative to the center frequency and reference level set with the
SAN:CFR and SAN:RLEV commands. If the center frequency is
changed after setting the mask, the mask remains in the same position
on the screen, and measurements are now relative to the new center
frequency and reference level.
Syn t a x
SAN:MASK:TYPE ‘Fix’
‘Rel’
SAN:MASK:TYPE?
Scr een /field eq u iva len t
SAN:MASK:DISP controls the Mask Typefield on the Maskmenu of the
SPEC ANL screen.
Chapter 1
329
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:RF Gen er a tor <str in g>
:RF Gen er a tor ?
This command selects between the fixed frequency generator and the
tracking generator. The query form returns the mode setting of the
generator.
Syn t a x
SAN:RFG ‘Track’
‘Fixed’
SAN:RFG?
Scr een /field eq u iva len t
SAN:RFG controls the Track/Fixedfield on the RF Genmenu of the
SPEC ANL screen.
:RLEVel <r ea l n u m ber >
:RLEVel?
These commands set/query the reference level of the spectrum analyzer.
but does not use the :STATe command.
Syn t a x
SAN:RLEV <real number>
SAN:RLEV?
Scr een /field eq u iva len t
SAN:RLEV controls the Ref Levelfield on Mainmenu of the SPEC
ANL screen.
330
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:SPAN <r ea l n u m ber >
:SPAN?
These commands set/query the span of the spectrum analyzer display.
but does not use the :STATe command.
Syn t a x
SAN:SPAN <real number>
SAN:SPAN?
Scr een /field eq u iva len t
SAN:SPAN controls the Spanfield on the Mainmenu SPEC ANL
screen.
:TGENer a tor :AMP Litu d e <r ea l n u m ber >
:TGENer a tor :AMP Litu d e?
These commands set/query the amplitude of the tracking generator. To
select the tracking generator use the SAN:RFG ‘Track’ command.
Syn t a x
SAN:TGEN:AMPL <real>
SAN:TGEN:AMPL?
Scr een /field eq u iva len t
SAN:TGEN:AMPL controls the Amplitudefield on the RF Genmenu of
the SPEC ANL screen. The Track/Fixedfield must be set to Track.
Chapter 1
331
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:TGENer a tor :DE STin a t ion <str in g>
:TGENer a tor :DE STin a t ion ?
These commands set/query the output port for the tracking generator.
To select the tracking generator use the SAN:RFG ‘Track’ command.
Syn t a x
SAN:TGEN:DEST ‘RF Out’
‘Dupl’
SAN:TGEN:DEST?
Scr een /field eq u iva len t
SAN:TGEN:DEST controls the RF Out/Dupl subfield of the Port/Sweep
field on the RF Genmenu of the SPEC ANL screen. The Track/Fixed
field must be set to Track.
:TGENer a tor :OF Requ en cy <r ea l n u m ber >
:TGENer a tor :OF Requ en cy?
These commands set/query the offset frequency of the tracking
generator. To select the tracking generator use the SAN:RFG ‘Track’
command.
but does not use the :STATe command.
Syn t a x
SAN:TGEN:OFR <real number>
SAN:TGEN:OFR?
Scr een /field eq u iva len t
SAN:TGEN:OFR controls the Offset Freqfield on the RF Genmenu of
the SPEC ANL screen. The Track/Fixedfield must be set to Track.
332
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:TGENer a tor :SWEep <str in g>
:TGENer a tor :SWEep ?
These commands set/query the sweep type of the tracking generator. To
select the tracking generator use the SAN:RFG ‘Track’ command.
‘Norm’ specifies a sweep from low to high frequency. ‘Invert’ specifies a
sweep from high to low frequency.
Syn t a x
SAN:TGEN:SWE ‘Norm’
‘Invert’
SAN:TGEN:SWE?
Scr een /field eq u iva len t
SAN:TGEN:SWE controls the Norm/Invertsubfield of the Port/Sweep
field on the RF Genmenu of the SPEC ANL screen. The Track/Fixed
field must be set to Track.
Chapter 1
333
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:TRACe:MHOLd <str in g>
:TRACe:MHOLd ?
These commands set/query the type of averaging used in the spectrum
analyzer ’s display.
Syn t a x
SAN:TRAC:MHOL ‘No Pk/Avg’
‘Pk Hold’
‘Avg 1’
‘Avg 2’
‘Avg 3’
‘Avg 4’
‘Avg 5’
‘Avg 10’
‘Avg 20’
‘Avg 50’
‘Avg 100’
‘Off’
SAN:TRAC:MHOL?
Scr een /field eq u iva len t
SAN:TRAC:MHOL controls averaging field on the Auxilliarymenu of
the SPEC ANL screen. This field is located under the menu control
field.
334
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
SANalyzer subsystem
:TRACe:NORMa lize <str in g>
:TRACe:NORMa lize?
These commands set/query the type of trace display. ‘A Only’ provides a
continuously updated display (normal operation). ‘A-B’ displays the
difference between the trace saved using SAN:TRAC:SAVE and the
currently displayed trace.
Syn t a x
SAN:TRAC:NORM ‘A Only’
‘A-B’
SAN:TRAC:NORM?
Scr een /field eq u iva len t
SAN:TRAC:NORM controls the A Only/A-Bsubfield of the Normalize
field on the tracking generator of the SPEC ANL screen’s Auxilliary
menu.
:TRACe:SAVE
This command stores the trace that is currently displayed on the
spectrum analyzer display.
Syn t a x
SAN:TRAC:SAVE
Scr een /field eq u iva len t
SAN:TRAC:SAVE controls the Save Bsubfield of the Normalizefield
on the SPEC ANL screen’s Auxilliarymenu.
Chapter 1
335
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
STATu s
The STATus subsystem reports many of the modes of the Test Set,
including the states. These commands do not correspond to fields in
specific screens. For detailed information about status registers, see
“Status Reporting” in the Advanced Operations chapter of the Test Set’s
Programmer ’s Guide.
:P RESet
This command presets the Test Set.
Syn t a x
STAT:PRES
:CALibr a tion :CONDition ?
This command queries the state of the calibration.
This query returns an integer value.
Syn t a x
STAT:CAL:COND?
:CALibr a tion :ENABle
:CALibr a tion :ENABle?
This command enables the calibration.
This query returns an integer value.
Syn t a x
STAT:CAL:ENAB
STAT:CAL:ENAB?
:CALibr a tion [:EVENt]?
This command queries the state of the event.
Syn t a x
STAT:CAL[:EVEN]?
336
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:CALibr a tion :NTRa n sition
:CALibr a tion :NTRa n sition ?
These commands set/query the state of the negative transition of the
calibration.
This query returns an integer value.
Syn t a x
STAT:CAL:NTR
STAT:CAL:NTR?
:CALibr a tion [:EVENt?]:P TRa n sition
:CALibr a tion [:EVENt?]:P TRa n sition ?
These commands set/query the state of the positive transition of the
calibration.
This query returns an integer value.
Syn t a x
STAT:CAL:PTR
STAT:CAL:PTR?
:COMMu n ica te:CONDition ?
This query returns an integer value.
Syn t a x
STAT:COMM:COND?
:COMMu n ica te:E NABle
:COMMu n ica te:E NABle?
This query returns an integer value.
Syn t a x
STAT:COMM:ENAB
STAT:COMM:ENAB?
Chapter 1
337
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:COMMu n ica te[:E VENt?]:NTRa n sition
:COMMu n ica te[:E VENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:COMM:NTR
STAT:COMM:NTR?
:COMMu n ica te[:E VENt?]:P TRa n sition
:COMMu n ica te[:E VENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:COMM:PTR
STAT:COMM:PTR?
:HARD1:CONDition ?
Status reporting for hardware.
This query returns an integer value.
Syn t a x
STATHARD1:COND?
:HARD1:ENABle
:HARD1:ENABle?
This query returns an integer value.
Syn t a x
STAT:HARD1:ENAB
STAT:HARD1:ENAB?
:HARD1[:EVENt?]:NTRa n sition
:HARD1[:EVENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:HARD1:NTR
STAT:HARD1:NTR?
338
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:HARD1[:EVENt?]:P TRa n sition
:HARD1[:EVENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:HARD1:PTR
STAT:HARD1:PTR?
:HARD2:CONDition
:HARD2:CONDition ?
This query returns an integer value.
Syn t a x
STAT:HARD2:COND
STAT:HARD2:COND?
:HARD2:ENABle
:HARD2:ENABle?
This query returns an integer value.
Syn t a x
STAT:HARD2:ENAB
STAT:HARD2:ENAB?
:HARD2[:EVENt?]:NTRa n sition
:HARD2[:EVENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:HARD2:NTR
STAT:HARD2:NTR?
:HARD2[:EVENt?]:P TRa n sition
:HARD2[:EVENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:HARD2:PTR
STAT:HARD2:PTR?
Chapter 1
339
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:OP ERa tion :CONDition ?
This query returns an integer value.
Syn t a x
STAT:OPER:COND?
:OP ERa tion :ENABle
:OP ERa tion :ENABle?
This query returns an integer value.
Syn t a x
STAT:OPER:ENAB
STAT:OPER:ENAB?
:OP ERa tion [:EVE Nt?]:NTR a n sition
:OP ERa tion [:EVE Nt?]:NTR a n sition ?
This query returns an integer value.
Syn t a x
STAT:OPER:NTR
STAT:OPER:NTR?
:OP ERa tion [:EVE Nt?]:P TR a n sition
:OP ERa tion [:EVE Nt?]:P TR a n sition ?
This query returns an integer value.
Syn t a x
STAT:OPER:PTR
STAT:OPER:PTR?
:CALibr a tin g:CONDition ?
This query returns an integer value.
Syn t a x
STAT:CAL:COND?
340
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:CALibr a tin g:ENABle
:CALibr a tin g:ENABle?
This query returns an integer value.
Syn t a x
STAT:CAL:ENAB
STAT:CAL:ENAB?
:CALibr a tin g[:EVENt?]:NTRa n sition
:CALibr a tin g[:EVENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:CAL:NTR
STAT:CAL:NTR?
:CALibr a tin g[:EVENt?]:P TRa n sition
:CALibr a tin g[:EVENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:CAL:PTR
STAT:CAL:PTR?
:QUESt ion a ble:CONDition ?
This query returns an integer value.
Syn t a x
STAT:QUES:COND?
:QUESt ion a ble:E NABle
:QUESt ion a ble:E NABle?
This query returns an integer value.
Syn t a x
STAT:QUES:ENAB
STAT:QUES:ENAB?
Chapter 1
341
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:QUESt ion a ble[:E VENt?]:NTRa n sition
:QUESt ion a ble[:E VENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:QUES:NTR
STAT:QUES:NTR?
:QUESt ion a ble[:E VENt?]:P TRa n sition
:QUESt ion a ble[:E VENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:QUES:PTR
STAT:QUES:PTR?
:MEASu r in g:CONDition ?
This query returns an integer value.
Syn t a x
STAT:MEAS:COND?
:MEASu r in g:ENABle
:MEASu r in g:ENABle?
This query returns an integer value.
Syn t a x
STAT:MEAS:ENAB
STAT:MEAS:ENAB?
:MEASu r in g[:EVE Nt?]:NTR a n sition
:MEASu r in g[:EVE Nt?]:NTR a n sition ?
This query returns an integer value.
Syn t a x
STAT:MEAS:NTR
STAT:MEAS:NTR?
342
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:MEASu r in g[:EVE Nt?]:P TR a n sition
:MEASu r in g[:EVE Nt?]:P TR a n sition ?
This query returns an integer value.
Syn t a x
STAT:MEAS:PTR
STAT:MEAS:PTR?
:CDMA1:CONDition ?
This query returns an integer value.
Syn t a x
STAT:CDMA1:COND?
:CDMA1:ENABle
:CDMA1:ENABle?
This query returns an integer value.
Syn t a x
STAT:CDMA1:ENAB
STAT:CDMA1:ENAB?
:CDMA1[:EVENt?]:NTRa n sition
:CDMA1[:EVENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:CDMA1:NTR
STAT:CDMA1:NTR?
:CDMA1[:EVENt?]:P TRa n sition
:CDMA1[:EVENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:CDMA1:PTR
STAT:CDMA1:PTR?
Chapter 1
343
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
STATus
:IBASic:CONDition ?
This query returns an integer value.
Syn t a x
STAT:IBAS:COND?
:IBASic:ENABle
:IBASic:ENABle?
This query returns an integer value.
Syn t a x
STAT:IBAS:ENAB
STAT:IBAS:ENAB?
:IBASic[:EVENt?]:NTRa n sition
:IBASic[:EVENt?]:NTRa n sition ?
This query returns an integer value.
Syn t a x
STAT:IBAS:NTR
STAT:IBAS:NTR?
:IBASic[:EVENt?]:P TRa n sition
:IBASic[:EVENt?]:P TRa n sition ?
This query returns an integer value.
Syn t a x
STAT:IBAS:PTR
STAT:IBAS:PTR?
344
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
GPIB Command Dictionary
TRIGger subsystem
TRIGger su bsystem
The Trigger subsystem contains commands for triggering
measurements. There are no screen/field equivalents for the trigger
subsystem commands. These commands will override any triggering
control fields on individual screens.
:ABOR t
This command ends a measurement cycle in progress.
Syn t a x
TRIG:ABOR
:IMMed ia te
This command triggers all selected measurements.
Syn t a x
TRIG:IMM
:MODE:RETRigger
:MODE:RETRigger ?
These commands set/query the retriggering setting.
Syn t a x
TRIG:MODE:RETR REPetitive
TRIG:MODE:RETR SINGle
TRIG:MODE:RETR?
:MODE:SETTlin g
:MODE:SETTlin g?
These commands set/query the transient settling function.
Syn t a x
TRIG:MODE:MODE:SETT FAST
TRIG:MODE:MODE:SETT FULL
TRIG:MODE:MODE:SETT?
346
Chapter1
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
Sym bols
Disarm, code domain analyzer,
Nu m er ics
Approximate RAM Available for
busy/idle delay
A
Arm Meas
C
cables
ACP Cal
Call Disconnect
ACP Fltr BW
ACP Offset
Call Originate
audio input
Center Freq
Channel
ADC FS
Audio Out
adjacent channel power (ACP)
Auto Zero
Auto/Hold
Input Atten, spectrum analyzer,
NAMP-NTAC decoder
NAMP-NTAC encoder
Channel (AMPS-TACS)
Auto/Manual
AM
B
Amplitude
Analyzer
Command Escape Character
Connection Timeout
Index
347
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
Controls
forward control channel
forward voice channel
D
E
Data Length
Data Level (AMPS-TACS)
Edit Mask
error vector magnitude (EVM),
Frq Err
Data Level (NAMP-NTAC)
FOCC
FVC
NAMP-NTAC
G
Gain
F
Gate Time
Decimal Equivalent
Delay
Filler
Flow Control
Trig Event, CDMA analyzer,
FM
Trig Event, code domain
Gen Mode
Disarm
H
Disconnect
348
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
Hi Tone
Trace Power Complex IS2000,
Holdoff Delay
Measure,Code Domain Analyzer
J
I
IBASIC Echo
L
Level
delta marker, spectrum
Incoming Call Security
normal marker, spectrum
Measure,Code Domain Analyzer
Lo Tone
Marker Channel Spread Rate,
Input Level
Lvl
Marker Channel Walsh Order,
Inst Echo
INSTRUMENT CONFIGURE
IQ modulation
Trace Absolute Power Basic,
IQ Plot
Trace Absolute Power
M
IS2000
Trace Absolute Power
Marker To
Trace Absolute Power
markers
Trace Absolute Power
AM depth at
Code Domain Analyzer
Trace Power Complex
delta frequency at
FM deviation at
Index
349
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
frequency at
level at
frequency error, CDMA
N
phase at
frequency error, code domain,
Norm/Invert
RF level at
frequency error, DTMF high
Normalize
time at
frequency error, DTMF low tone,
Mask Type
frequency error, RF analyzer,
frequency, DTMF high tone,
mathematical operations
Number to Call
O
measurements
time offset, CDMA analyzer,
Off Time
On Time
Originate
Message
AMPS-TACS
adjacent channel power (ACP),
NAMP-NTAC
oscilloscope
Mod In To
carrier feedthrough, CDMA
P
carrier feedthrough, code
Parity
Password
Model
Modem Configuration
Modem
Initialization/Configuration
Modem Mode
350
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
Serial Baud
Retrys
RF Gen
SIGNALING DECODER screen,
SIGNALING ENCODER screen,
Port/Sweep
Single/Cont
PRINTER CONFIGURE screen,
ANL screen
Squelch
S
SAT Level
Status
Q
Qual Event
scale, spectrum analyzer display,
R
RAM
Send
amount available for programs,
status
Send Filler
NAMP-NTAC
Index
351
Download from Www.Somanuals.com. All Manuals Search And Download.
In d ex
Programmer ’s Guide
Stop
trace
U
Stop Filler
phase of
power of
NAMP-NTAC
V
Stop Length
timing of
Vert/Div
Vert/div
Trigger Pattern (bin)
triggering
W
T
X
Time
Z
352
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|