|
ADAM-4562
1 port Isolated USB to RS-232 Converter
User’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Specification
z
Compatibility: USB v1.1 standard
z
Interface: Network: USB
Serial: RS232
z
Connector: Network: USB-type A connector (type A to type B cable provided)
Serial: DB-9 serial connectors
Transmission speed: 75bps to 115.2Kbps
z
z
Power Consumption : 155mA@5V(typical)
220mA@5V(Max.)
z
z
z
z
Parity bit: Odd, Even, Mark, Space, None
Data bit: 5, 6, 7, 8
Stop bit : 1, 1.5 , 2
Error detection: Parity error, frame error, serial break
z
z
z
Isolation protection: 2,500 Vdc
Case: ABS with captive mounting hardware
Operating temperature: 0° to 70° C
z
z
z
Storage Temperature: -25° to 80° C
Operating Humidity: 20% to 95% (non-condensing)
Storage Humidity: 0% to 95% (non-condensing)
•
1.4 Package Checklist
z
z
z
z
z
ADAM-4562
ADAM series CD
One Type A to Type B USB cable
NYLON DIN-rail Mounting Adapter
SECC Panel Mounting Bracket
If you have any questions about USB standard, please refer to the web
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Hardware Installation
2.1 Network Architecture
Traditional serial port communication uses a COM port board that slides into one of the
slots at the back of your PC. With the ADAM-4562, you can access the COM port from
USB ports. The ADAM-4562 can be integrated into the network architecture of any
protocol.
Note: all the operating systems on your host must support USB v1.1 or above standard,
such as Windows 98/2000/XP. USB devices are used in “Master-Slave” architecture.
Before you use ADAM-4562, you must determine the master PC. The following
illustration shows the network architecture:
Figure 2-1: Network Architecture
2.2 Network Connection
When using the ADAM-4562, you will simply plug one end of USB cable (included in
package) into ADAM-4562, and the other end into the USB hub or your host PC.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Serial Connection
The model of the ADAM-4562 has one RS-232 DTE connector for connecting serial
ports on the bottom of module.
Note: In USB v1.1 standard, if you have used the COM3, COM4…..COMn of host PC.
When you plug ADAM-4562 in the host PC, theCOM port will be COMn+1.
Figure 2-1 RS-232 Terminal (DTE) connections
2.4 Jumper Settings
Grounding is one of the most important issues for our system. Just like Frame
Ground of the computer, this signal offers a reference point of the electronic circuit
inside the computer. If we want to communicate with this computer, both Signal
Ground and Frame Ground should be connected to make a reference point of
each other’s electronic circuit. Generally speaking, it is necessary to install an
individual grounding bar for each system, such as computer networks, power
systems, telecommunication networks, etc. Those individual grounding bars not
only provide the individual reference point, but also make the earth a our ground!
Jumper JP1 allows choosing the ground setting. If jumpers JP1 is set as following, the
pins 1 & 2 are closed and it means the ground is connected to the shell of DB9 connector.
On the other words, the pins 2 & 3 are closed and it means the ground is floating
ground is connected to
the shell of DB9 connector
(default setting)
ground is floating
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Driver and Utility Installation
In order to use a PC to control serial devices connected to the ADAM-
4562, you must first have a host running Windows 98/2000/XP.
Following are the installation instructions to set up the ADAM-4562.
1. Insert the ADAM-4562 Driver utility diskette into the CD drive
(e.g. E:\) on the host PC.
2. Plug in the USB connector of ADAM-4562 then system will detect the new device
automatically and show the hardware wizard. Please choose the item Install from a
list or specific location if it is the first use on this PC.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Indicate the location to specify the installation path like as
E:\ADAM-4562/driver/98_2k_XP/ then it will auto-select the suitable driver to
install for your system. After you have specified the installation path, click the Next
button.
4. It will has the dialog window for this installation, please click the button of
Continue Anyway to start set up
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. It shows the following window when the installation is completed and use also
can find the com port of ADAM-4561/4562 on Device manager
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|