User Guide
Internal IDE/SATA/USB
DigiDrive (AEDMDISU2)
T E C H N O L O G I E S
4-Pin Floppy
Power Port
SATA 1.5Gbs
Data Port
Mode Jumper JP4
(Close or Open)
Pin 1
USB 5-Pin Header
Drive Activity LED
4-Pin Floppy Power Connector
4 slots - CF, SD, MMC, MiniSD, SM,
xD, MS, MS Duo and MS Pro Duo
SATA Port 2 (Slave)
SATA Port 1 (Master)
Standard 40-Pin IDE Interface for Mounting
Directly onto Motherboard IDE Channel
Mode Jumper (JP4):
Note: Only applies on SATA connection
The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD
(with adapter), Trans flash, SD HS (Secure Digital High Speed), MMC Cards (4-bit and 8-bit modes),
RS-MMC, MMC-Micro, MMC Plus, Smart Media, xD picture card- both H and M types, Memory
stick, Memory stick PRO, MS Extreme III Type media, MS PRO, HS (4-bit mode).
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Download from Www.Somanuals.com. All Manuals Search And Download.
|