Abocom Network Card UFT128S User Manual
USB LAN ISDN  
Quick Installation Guide  
M73-APO08-360  
Download from Www.Somanuals.com. All Manuals Search And Download  
Parts Names and Functions  
1.  
2.  
USB Cable: connects the USB LAN ISDN  
to the USB host port of your computer.  
USB Port: connects to the USB cable’s  
square end.  
3.  
4.  
5.  
LAN Port: connects to a LAN Cable.  
ISDN Port: connects to an ISDN Cable.  
Link Indicator: glows green when  
10/100M Fast Ethernet is linked.  
6.  
B1 Indicator: glows green when the  
transmitting / receiving data in 64 Kbps  
speed mode.  
7.  
B2 Indicator: glows green when the  
transmitting / receiving data in 128 Kbps  
speed mode.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
HARDWARE INSTALLATION  
Installing the USB LAN ISDN  
Connecting the USB Cabling  
1. Insert the USB cable’s square end into the  
adapter’s USB port.  
2. Insert the rectangular end of the USB cable  
into the USB host port on your PC.  
Connecting to an ISDN Network  
1. Connect one end of an ISDN cable into the  
adapter’s ISDN port.  
2. Connect the other end of the ISDN cable  
into S/T port on NT1 ISDN device.  
Connecting to the LAN Network  
1.  
Connect one end of the LAN cable into the  
adapter's LAN port.  
2.  
Connect the other end of the LAN cable to  
a Hub.  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
SOFTWARE INSTALLATION  
Windows 98SE Installation  
1. Once the device is connected, windows  
98SE will automatically detect the device  
and appear the following figure. Click Next  
to continue.  
2. Select Search for the best driver for your  
device (Recommended) and click Next.  
3. Insert the device driver into your CD-ROM.  
Select Specify a location, direct Windows  
98SE to the location where the driver stored  
(e.g. E:\USB) and click Next. Windows  
98SE will search for the suitable driver for  
the software installation need.  
4. Click Next. Windows 98SE will start  
copying necessary files onto your system.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
5. In ISDN Configuration, click Next.  
6. Select the switch protocol that your  
telephone company uses and click Next.  
7. Enter the telephone numbers that your ISP  
provided and click Next.  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
8. Click Finish.  
9. Click Finish to continue the software  
installation.  
10. Windows 98SE will automatically detect the  
device and appear the following figure.  
Follow the on-screen instructions.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
11. Select Search for the best driver for your  
device (recommended) and click Next.  
12. Select Specify a location, direct Windows  
98SE to the location where the driver stored  
(e.g. E:\USB) and click Next. Windows  
98SE will search for the suitable driver for  
the software installation need.  
13. Click Next. Windows 98SE will start  
copying necessary files onto your system.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
14. The installation program will proceed  
automatically. Click Finish.  
15. When Windows prompts you to restart your  
computer, click Yes.  
16. To verify if your network adapter exists in  
your computer and well enabled, you can  
perform the following steps.  
17. Go to Start Æ Settings Æ Control Panel  
Æ Systems Æ Device Manager.  
18. Click Intelligent ISDN Drivers, Network  
adapters and Universal Serial Bus  
controllers to expand. If Intelligent CAPI  
2.0 driver, Intelligent USB adapter,  
Intelligent  
ISDN  
WAN  
miniport,  
Intelligent USB 10/100 Network Adapter  
and Generic USB Hub are found, that  
means your network adapter exists and  
enabled. If not, consult your distributor for  
technical support.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
Windows 2000 Installation  
1. Once the device is connected, Windows 2000  
will automatically detect the device and  
appear the following figure. Click Next to  
continue.  
2. Select Search for a suitable driver for my  
device (Recommended) and click Next.  
3. Select Specify a location and click Next.  
4. Insert the device driver into your CD-ROM.  
Click Browse, direct Windows 2000 to the  
location where the driver stored (e.g.:  
E:\USB) and click OK.  
5. Click Next. Windows 2000 will start  
copying necessary files onto your system.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
6. Click Finish to continue.  
7. Windows 2000 will automatically detect the  
device and appear the following figure.  
Click Next to continue.  
8. Select Search for a suitable driver for my  
device (recommended) and click Next.  
9. Select Specify a location and click Next.  
10. Click Browse, direct Windows 2000 to the  
location where the driver stored (e.g.:  
E:\USB) and click OK.  
11. Click Next. Windows 2000 will start  
copying necessary files onto your system.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
12. Click Yes to continue.  
13. Click Finish to complete the software  
installation.  
14. To verify if your network adapter exists in  
your computer and well enabled, you can  
perform the following steps.  
15. Go to Start Æ Settings Æ Control Panel  
Æ Systems Æ Hardware Æ Device  
Manager.  
16. Click Intelligent ISDN Drivers, Network  
adapters and Universal Serial Bus  
controllers to expand. If Intelligent CAPI  
2.0 driver, Intelligent USB adapter,  
Intelligent  
ISDN  
WAN  
miniport,  
Intelligent USB 10/100 Network Adapter  
and Generic USB Hub are found, that  
means your network adapter exists and  
enabled. If not, consult your distributor for  
technical support.  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
Windows ME Installation  
1. Once the device is connected, Windows ME  
will automatically detect the device and  
appear the following figure. Insert the  
device driver into your CD-ROM drive,  
select Automatic search for…and click  
Next.  
Windows ME will search for  
appropriate driver and copy necessary files  
onto your system.  
2. When the ISDN Configuration windows  
appears, click Next.  
3. Select appropriate Switch Protocol and  
click Next.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
4. Enter the Phone numbers that your ISP  
provided and click Next.  
5. Click Finish.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
6. Click Finish to continue.  
7. Windows ME will automatically detect the  
device and appear the following figure.  
Select Automatic search for…and click  
Next.  
Windows ME will search for  
appropriate driver and copy necessary files  
onto your system.  
8. Click Finish to complete the installation.  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
9. When Windows prompts you to restart your  
computer, click Yes.  
10. To verify if your network adapter exists in  
your computer and well enabled, you can  
perform the following steps.  
11. Go to Start Æ Settings Æ Control Panel,  
Æ Systems Æ Hardware Æ Device  
Manager.  
12. Click Intelligent ISDN Drivers, Network  
adapters and Universal Serial Bus  
controllers to expand. If Intelligent CAPI  
2.0 driver, Intelligent USB adapter,  
Intelligent  
ISDN  
WAN  
miniport,  
Intelligent USB 10/100 Network Adapter  
and Generic USB Hub are found, that  
means your network adapter exists and  
enabled. If not, consult your distributor for  
technical support.  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
Windows XP Installation  
1.  
Once the device is connected, Windows XP  
will automatically detect the device and  
appear the following figure. Insert the  
device driver into your CD-ROM drive,  
select  
automatically…and  
Install  
the  
click  
software  
Next.  
Windows XP will search for appropriate  
driver and copy necessary files onto your  
system.  
2.  
Click Continue Anyway.  
3.  
4.  
Click Finish to continue.  
Windows XP will automatically detect the  
device and appear the following figure.  
Select  
Install  
the  
software  
automatically…and click Next.  
5.  
Click Continue Anyway.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
6.  
Click Finish to complete the software  
installation.  
7.  
8.  
To verify if your network adapter exists in  
your computer and well enabled, you can  
perform the following steps.  
Go to Start Æ Settings Æ Control Panel,  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download  
Æ Systems Æ Hardware Æ Device  
Manager.  
9.  
Click Intelligent ISDN Drivers, Network  
adapters and Universal Serial Bus  
controllers to expand. If Intelligent CAPI  
2.0 driver, Intelligent USB adapter,  
Intelligent ISDN WAN miniport,  
Intelligent USB 10/100 Network Adapter  
and Generic USB Hub are found, that  
means your network adapter exists and  
enabled. If not, consult your distributor  
for technical support.  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download  

3M Tablet Accessory 10700 User Manual
Acu Rite Clock DeIux wirelss weather station and atomic clock User Manual
Acu Rite Weather Radio 11146 3N1WC User Manual
Admiral Air Conditioner AAWV 06CR1FAU User Manual
Aga Ranges Range U104001 03 User Manual
Agilent Technologies Network Card 85225F User Manual
Allied Telesis Network Router AT WR4600 User Manual
Aspire Digital Laptop 2010 User Manual
Atmel Computer Hardware 8 bit Microcontrollers with Integrated USB Controller User Manual
Audiovox Automobile Electronics ACAM350 User Manual