480i, 480i CT, 9112i, 9133i
SIP IP PHONE
41-001024-00
Rev 09
Release Notes
Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
About this Document ......................................................................................................1
General Information ........................................................................................................2
Release Content Information ......................................................................................2
Hardware Supported ...................................................................................................2
Bootloader Requirements ...........................................................................................2
Upgrade Notes ............................................................................................................3
New Features in 1.4.1 ......................................................................................................4
Description ..................................................................................................................4
SIP Timers ..................................................................................................................7
SIP Registration Renewal Timer ...........................................................................7
SIP Registration Timeout Retry Timer ..................................................................9
Prefix Dialing .............................................................................................................13
How it works .......................................................................................................13
Configuring via the Configuration Files ...............................................................14
Configuring via the Aastra Web UI .....................................................................15
Last Number Redial ..................................................................................................15
XML Objects and Enhancements ..............................................................................16
XML: AastraIPPhoneStatus object .....................................................................16
XML: AastraIPPhoneExecute Object ..................................................................23
XML: Action URI .................................................................................................25
XML: Softkey URI ...............................................................................................30
XML: HTTP Refresh Header ..............................................................................33
Backup Proxy/Registrar Support ...............................................................................34
How it Works .......................................................................................................34
Configuring via the Configuration Files ...............................................................34
Auto-discovery Using mDNS .....................................................................................39
41-001024-00, Rev 09, Release 1.4.1
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Last Call Return (lcr) Support .............................................................................40
How it works .......................................................................................................40
Startup Enhancement ................................................................................................45
Single Call Restriction (480i CT only) .......................................................................46
Configuring via the Configuration Files ...............................................................46
Configuring via the Aastra Web UI .....................................................................47
Configuring via the Aastra Web UI .....................................................................49
Issues Resolved in Release 1.4.1 .................................................................................50
Description ................................................................................................................50
Enhancements/Changes ...........................................................................................51
Known Anomalies in 1.4.1 ............................................................................................52
Description ................................................................................................................52
Contacting Aastra Telecom Support............................................................................ 53
iv
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone
Models 480i, 480i CT, 9112i, 9133i
Release Notes 1.4.1
This document provides information specific to the SIP IP Phone release 1.4.1. It
•
•
•
•
•
New Features in 1.4.1
Issues Resolved in Release 1.4.1
Known Anomalies in 1.4.1
Contacting Aastra Telecom Support
41-001024-00, Rev 09, Release 1.4.1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
General Information
General Information
Release Content Information
This document provides release content information on the Aastra 480i, 480i CT,
9112i, and 9133i SIP IP phone firmware.
Model
480i
Release Name
Release Version
Release Filename
Release Date
Generic SIP
Generic SIP
Generic SIP
Generic SIP
1.4.1
1.4.1
1.4.1
1.4.1
FC-000032-01-09
FC-000040-00-09
FC-000058-01-09
FC-000046-01-09
November 2006
November 2006
November 2006
November 2006
480i CT
9112i
9133i
Hardware Supported
This release of firmware is compatible with the following Aastra IP portfolio
products:
•
•
•
•
480i
480i CT
9112i
9133i
Bootloader Requirements
This release of firmware is compatible with the following Aastra IP portfolio
product bootloader versions:
•
•
•
•
480i - Bootloader 1.1.0.4 or above
480i CT - Bootloader 1.1.0.4 or above
9112i - Bootloader 1.1.0.10 or above
9133i - Bootloader 1.1.0.10 or above
2
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
General Information
Upgrade Notes
This section provides notes that customers should be aware of before upgrading to
IP phone firmware release 1.4.1. Aastra Telecom recommends that customers read
this section completely and thoroughly prior to the upgrade to avoid any known
issues with the upgrade process.
•
The recommended base IP Phone firmware to upgrade to this new firmware
release is 1.2.2 or above.
•
Users who previously adjusted the audio transmit and receive gains for the
Aastra IP Phones should reset the values to "0" and re-tune their phones again
with release 1.4.1 if necessary. This is required to avoid high transmit levels
heard by the far-end after upgrading to 1.4.1. To set audio transmit and
receive gains in the 1.4.1 configuration files, see the SIP IP Phone
Administrator Guide Release 1.4 or the SIP IP Phone Release Notes Version
1.3.1.
•
•
Users upgrading from release 1.2.2 to 1.4.1 may experience post-upgrade
configuration issues IF they previously configured their phones solely using
the telephone user interface or Aastra Web user interface. Users may need to
reconfigure their settings again after the upgrade due to new file system
enhancements. This issue does not affect customers who configure their
phones using a TFTP/FTP/HTTP server.
Users who wish to downgrade from release 1.4.1 to 1.2 must downgrade to
release 1.2.2 prior to downgrading to release 1.2, in order to restore file
system structure. Failure to downgrade to version 1.2.2 first may result in
configuration parameters being ignored.
41-001024-00, Rev 09, Release 1.4.1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
New Features in 1.4.1
Description
This section describes the features new to the IP phones in release 1.4.1. The
features apply to all IP Phone models (480i, 480i CT, 9112i, and 9133i), unless
specifically stated that only a particular IP phone model supports the feature.
The following table lists the new features in release 1.4.1. The paragraphs
following this table describe each feature in detail.
Feature
Description
Page
All Models
SIP Timers
The following are SIP timers that were added or changed
on the IP phones:
SIP Registration Renewal Timer - A new parameter called sip page 7
registration renewal timer has been added that allows an
administrator to control when the phone renews SIP
registrations. Configurable via configuration files and Aastra
Web UI.
attempts to register the phone after a REGISTER message
times outs. This new parameter is called sip registration
timeout retry timer. Configurable via configuration files and
“SIP Registration Retry Timer” Web UI Parameter Name
Change - In the Aastra Web UI only, the “registration retry
timer” parameter name has changed to registration failed
retry timer.
page 10
Explicit Message Waiting Indicator (MWI) Subscription Period page 11
- An administration can now set the length of time, in
seconds, of an explicit MWI subscription. This value allows
the phone to re-subscribe the explicit MWI subscription
before the timeout value is reached.
Prefix Dialing
An administrator can now enter a digit(s) at the end of the
Local Dial Plan parameter string, which allows the IP phone
to automatically add the digit as a prefix to a dialed number.
page 13
4
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Feature
Description
Page
Last Number Redial
dialed. They can also press the REDIAL button once, scroll
the list of numbers, then press the REDIAL button again to
dial the number that displays on the screen.
XML Objects and
Enhancements
The following are new XML objects on the IP phone:
•
XML: AastraIPPhoneStatus object - The IP phones now
display a status message on a single designated line on
the phone’s idle screen when XML information is pushed
from the servers.
page 16
The 480i/480i CT phones display messages on the
second line (where “No Service” would display). The
9112i/9133i phones display messages on the first line
(overriding the DisplayName). Long messages that are
wider then the phone screen get truncated.
•
XML: AastraIPPhoneExecute Object - This object
provides the ability to execute commands on the phone
using XML. Specific commands you can use with this
object are Reset and NoOp.
page 23
page 25
The following are XML enhancements on the IP phone:
•
•
XML: Action URI - This feature provides administrators
the ability to specify a URI for the phone to GET when
certain events occur.
XML: Softkey URI - This feature allows the user to specify page 30
variables in the XML softkey URIs that are bound when
the key is pressed.
objects now have the ability to be refreshed by adding a
Refresh and URL setting to the HTTP headers.
page 33
Backup Proxy/Registrar
Support
The IP phones now support the use of a backup SIP proxy/
registrar. You can configure this feature on a global or per-line
basis via the configuration files or the Aastra Web UI.
page 34
Auto-discovery Using
mDNS
Release 1.4.1 introduces a process that allows the phones to page 39
auto-discover a TFTP server using mDNS, and subsequently
be automatically configured by a TFTP server.
41-001024-00, Rev 09, Release 1.4.1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Feature
Description
Page
IP Phone Features for
Sylantro Servers
The following are new features added to the IP phones
for Sylantro servers:
Last Call Return (lcr) Support - A new feature has been
added to the IP phones that allow a user or administrator to
configure a "last call return" function on a softkey or
programmable key. This feature is for Sylantro servers only.
You can configure the “lcr” softkey feature via the
configuration files and the Aastra Web UI.
page 40
Support for additional “Alert Info” keywords for distinctive
ringing - The IP phones now allow you to configure new
distinctive ringing priority alert parameters for Sylantro
servers. These “info” parameters allow you to configure
specific priority alert tones for each parameter that may
appear as key words in the “Alert-Info” header of a Sylantro
server. The new keywords are alert-acd, alert-community-1,
alert-community-2, alert-community-3, and
page 41
alert-community-4. You can configure these new
parameters via the configuration files or the Aastra Web UI.
Startup Enhancement
480i CT Only
Upon phone startup, the maximum time the phone spends
attempting to contact the configuration server (TFTP, FTP or
HTTP) has been reduced.
page 45
page 46
CT only)
allows an administrator to enable or disable a single call
restriction between the 480i CT and a call server.
9112i/9133i Only
Addition of DisplayName1 & The 9112i and 9133i IP phones now support the parameters, page 48
DisplayName2 (now also
applies to 9112i/9133i)
displayName1 and displayName2. Configurable via the
configuration files and the Aastra Web UI.
6
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
SIP Timers
The following paragraphs describe SIP timers that have been added or changed in
Release 1.4.1.
SIP Registration Renewal Timer
A new parameter has been added to the IP phones that enables an administrator to
control when registration renewals occur. The new parameter sip registration
renewal timer specifies the length of time, in seconds, before the expiration of an
existing registration, that the registration is renewed. For example, if the value is
set to 20, then 20 seconds before the registration is due to expire, a new
REGISTER message is sent to the registrar to renew the registration.
The parameter may be set via the configuration files and the Aastra Web UI.
Configuring via the Configuration Files
You use the following parameter in the configuration files to control when the
phone renews SIP registration:
Parameter –
sip registration renewal timer
Aastra Web UI
Advanced Settings->Global SIP->
Advanced SIP Settings
Configuration Files
aastra.cfg, <mac>.cfg
Registration Renewal Timer
(in Web UI)
Description
Format
The length of time, in seconds, that the phone renews registrations.
Integer
Default Value
Range
15
0 to 214748364
The value set for this parameter should be between 0 and the value set
for the registration period.
Example
sip registration renewal timer: 10
41-001024-00, Rev 09, Release 1.4.1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You can set the Registration Renewal Timer in the Aastra Web UI at
Advanced Settings->Global SIP->Advanced SIP Settings.
Registration Renewal
Timer
8
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
SIP Registration Timeout Retry Timer
An administrator can now set the length of time, in seconds, that the phone waits
until it re-attempts to register after a REGISTER message times out. This
parameter is called, sip registration timeout retry timer, and is configurable via
the configuration files and the Aastra Web UI.
Configuring via the Configuration Files
You use the following parameter in the configuration files to configure the
registration timeout retry timer.
Parameter –
sip registration timeout retry
timer
Aastra Web UI
Advanced Settings->Global SIP->
Advanced SIP Settings
aastra.cfg, <mac>.cfg
Configuration Files
Registration Timeout Retry
Timer
(in Web UI)
Description
Specifies the length of time, in seconds, that the phone waits until it
re-attempts to register after a REGISTER message times out.
Note: If this parameter is set lower than 30 seconds, the phone uses a
minimum timer of 30 seconds.
Format
Integer
Default Value
Range
120
30 to 214748364
Example
sip registration timeout retry timer: 150
41-001024-00, Rev 09, Release 1.4.1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You can set “Registration Timeout Retry Timer” in the Aastra Web UI at
Advanced Settings->Global SIP->Advanced SIP Settings.
Registration Timeout
Retry Timer
“SIP Registration Retry Timer” Web UI Parameter Name Change
In the Aastra Web UI only, the registration retry timer parameter name has
been changed to “registration failed retry timer”. The functionality of this
parameter has not changed. The default value is still 1800 seconds.
10
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Explicit Message Waiting Indicator (MWI) Subscription Period
The IP phones support a new feature for MWI that allows the administrator to set
a requested duration, in seconds, before an explicit MWI subscription times out.
The phone re-subscribes to MWI before the subscription period ends.
The new parameter you can configure is “sip explicit mwi subscription period”.
You can configure this parameter using the configuration files or the Aastra Web
UI.
Configuring via the Configuration Files
You configure the explicit MWI timeout using the following parameter in the
configuration files.
Parameter –
sip explicit mwi subscription
period
Aastra Web UI
Advanced Settings->Global SIP->
Advanced SIP Settings
Configuration Files aastra.cfg, <mac>.cfg
Explicit MWI Timeout
(in Web UI)
Description
The requested duration, in seconds, before the MWI subscription times
out. The phone re-subscribes to MWI before the subscription period
ends.
Format
Integer
Default Value
Range
86400
30 - 214748364
sip explicit mwi timeout: 30
Example
41-001024-00, Rev 09, Release 1.4.1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You configure “Explicit MWI Subscription Period” in the Aastra Web UI at
Advanced Settings->Global SIP->Advanced SIP Settings.
Explicit MWI Subscription
Period
12
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Prefix Dialing
The IP phones now support a prefix dialing feature for outgoing calls.
How it works
You can manually dial a number or dial a number from a list. The phone
automatically maps the pre-configured prepended digit in the configuration, to the
outgoing number. When a match is found, the prepended digits are added to the
beginning of the dial string and the call is dialed.
Note: The prepend digits are also added if the dialing times-out on a
partial match.
You can enable this feature by adding a prepend digit(s) to the end of the Local
Dial Plan parameter string in the configuration files or the Aastra Web UI at
Basic Settings->Preferences->General.
For example, if you add a prepend map of “[2-9]XXXXXXXXX,91”, the IP
phone adds the digits “91” to any 10-digit number beginning with any digit from 2
to 9 that is dialed out. Other examples of prepend mappings are:
•
1X+#,9 (Prepends 9 to any digit string beginning with “1” and terminated
with “#”.)
•
•
6XXX,579 (Prepends “579” to any 4-digit string starting with “6”.)
[4-6]XXXXXX,78 (Prepends “78” to any 7-digit string starting with “4”, “5”, or “6”.)
Note: You can configure a local dial plan via the configuration files or
the Aastra Web UI.
41-001024-00, Rev 09, Release 1.4.1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Example
If you enter the following dial string for a local dial plan:
sip dial plan: 1+#,9
where “9” is the prepended digit, and you dial the following number:
15551212
the IP phone automatically adds the “9” digit to the beginning of the dialed
number before the number is forwarded as 915551212.
Configuring via the Configuration Files
You use the following parameter to configure local dial plan with a prepended
digit(s).
Parameter –
sip dial plan
Aastra Web UI
Configuration Files
Basic Settings->Preferences
aastra.cfg, <mac>.cfg
Local Dial Plan
(in Web UI)
Description
A dial plan describes the number and pattern of digits that a user dials to
reach a particular telephone number. The SIP local dial plan is as follows:
Symbol
Description
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Digit symbol
X
Match any digit symbol (wildcard)
Other keypad symbol
Expression inclusive OR
0 or more of the preceding digit symbol
or [] expression
Symbol inclusive OR
Used only with [], represent a range of
acceptable symbols; For example, [2-8]
In the configuration files, enter the sip dial
plan value using quotes.
*, #, .
|
+
[]
-
“,” (open/close quotes)
Note: You can configure prefix dialing by adding a prepend digit to the
dial string. For example, if you add a prepend map of
“[2-9]XXXXXXXXX,91”, the IP phone adds the digits “91” to any 10-digit
number beginning with any digit from 2 to 9 that is dialed out. Other
examples of prepend mappings are:
•
•
•
1X+#,9 (
6XXX,579 (Prepends “579” to any 4-digit string starting with “6”.)
[4-6]XXXXXX,78 (Prepends “78” to any 7-digit string starting with “4”,
“5”, or “6”.
Format
Alphanumeric characters
X+#|XX+*
Default Value
14
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Range
Up to 127 alphanumeric characters
sip dial plan: "1X+#,9”
Example
Configuring via the Aastra Web UI
You configure a local dial plan string in the Aastra Web UI at
Basic Settings->Preferences. The following illustration shows a Local Dial Plan
dial string in the Aastra Web UI using a prepended digit.
Local Dial Plan
Last Number Redial
The IP phones now have an enhanced redial user interface that allows a user
to quickly redial the last number that was dialed out from the phone. You can:
•
•
Press the REDIAL button twice to redial the last number dialed.
Press the REDIAL button once, scroll the list of numbers, then press the
REDIAL button again to dial the number that displays on the screen.
This feature is static and is not configurable.
41-001024-00, Rev 09, Release 1.4.1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
XML Objects and Enhancements
The following paragraphs describe the XML enhancements in release 1.4.1.
XML: AastraIPPhoneStatus object
A new XML AastraIPPhoneStatus object has been implemented on the IP
phones. This object provides the ability to display a status message on a single
designated line on the phone’s idle screen when XML information is pushed from
the servers.
The 480i/480i CT phones display messages on the second line in the phone
window. (where “No Service” would display if there was no service. If there is no
service on the phone, the “No Service” message overrides the XML object
message). The 9112i/9133i phones display messages on the first line (overriding
the DisplayName). Long messages that are wider then the phone screen get
truncated.
If the phone receives multiple messages, the first message received displays first
displayed until they are removed (by the server) or the phone reboots. The
AastraIPPhoneStatus object feature is always enabled.
Note: You can set the amount of time, in seconds, that a message displays
to the phone before scrolling to the next message. For more information
about this feature, see “Scroll Delay Option” on page 21.
AastraIPPhoneStatus Structure
The AastraIPPhoneStatus object describes the structure of the XML document
that is used to send status messages to the phone. The basic structure of the
AastraIPPhoneStatus object is:
<AastraIPPhoneStatus>
<Session>My session ID</Session>
<Message index="Msg index">Message</Message>
<! -- Additional status messages may be added under new Message tags-->
<AastraIPPhoneStatus/>
16
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
The ”My Session ID” attribute must be unique to the application sending the
XML object to the phone. The application generates the session ID, which could
be a combination of letters and numbers. There is a maximum of one <Session>
tag per PhoneStatus object, so the <Session> tag is optional.
Examples
Example 1: The following is an example of using the AastraIPPhoneStatus
object:
<AastraIPPhoneStatus>
<Session>abc12345</Session>
<Message index="3">Server side call forwarding disabled</Message>
<AastraIPPhoneStatus/>
In this example, the AastraIPPhoneStatus object sends the default behavior with
the status message (i.e., the status message is added to the scroll list).
Example 2: You can also use the AastraIPPhoneStatus object to remove status
messages from the display, by setting an empty tag for the <Message index> tag.
The following example removes the status message that was posted to the phone
in Example 1.
<AastraIPPhoneStatus>
<Session>abc12345</Session>
<Message index="3"/>
<AastraIPPhoneStatus/>
41-001024-00, Rev 09, Release 1.4.1
17
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Beep Option
You can enable or disable a BEEP option in the AastraIPPhoneStatus object.
When the phone receives a status message, the BEEP notifies the user that the
message is being displayed. The following attribute enables/disables the BEEP
from being heard:
< AastraIPPhoneStatus Beep="yes|no">
(case sensitive)
This attribute is optional. If notification is required, the attribute must be in the
ROOT. If the BEEP attribute is set to "yes" (i.e. Beep="yes") then it is an
indication to the phone to sound a beep when it receives the object. If the Beep
attribute is set to "no" (i.e. Beep="no") or not present, then the default behavior is
no beep is heard when the object arrives to the phone.
Beep Option via Configuration Files and Aastra Web UI
The BEEP option can also be enabled or disabled via the configuration files and
the Aastra Web UI using the following parameters:
•
•
xml beep notification (via configuration files)
XML Beep Support (via the Aastra Web UI)
The value set in the configuration files and Aastra Web UI override the attribute
you specify in the AastraIPPhoneStatus object.
For example, if the AastraIPPhoneStatus object has the attribute of Beep=”yes”,
and you uncheck (disable) the “XML Beep Support” in the Aastra Web UI, the
phone does not beep when it receives an AastraIPPhoneStatus object.
Setting the BEEP option in the configuration files and the Aastra Web UI is
dynamic and applies to the phone immediately.
18
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Configuring via the Configuration Files
You enable/disable the BEEP option using the following parameter in the
configuration files:
Parameter –
Aastra Web UI
Basic Settings->Preferences
xml beep notification
Configuration Files aastra.cfg, <mac>.cfg
XML Beep Support
(in Web UI)
Description
Enables or disables a BEEP notification on the phone when an
AastraIPPhoneStatus object containing a “beep” attribute arrives to the
phone.
Format
Boolean
1 (ON)
Default Value
Range
0 (OFF)No beep is audible even if the beep attribute is present in
the XML object.
1 (ON)The phone beeps when an XML object with the “beep”
attribute arrives to the phone.
Example
xml beep notification: 0
41-001024-00, Rev 09, Release 1.4.1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You enable/disable the BEEP option in the Aastra Web UI at
Basic Settings->Preferences.
XML Beep Support
20
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Scroll Delay Option
The IP phones support a scroll delay option that allows you to set the time delay,
in seconds, between the scrolling of each status message on the phone. The default
time is 5 seconds for each message to display before scrolling to the next message.
You can configure this option via the configuration files or the Aastra Web UI.
Changes are dynamic and apply to the phone immediately.
Configuring via the Configuration Files
You set a value for the scroll delay option using the following parameter in the
configuration files.
Parameter –
Aastra Web UI
Basic Settings->Preferences
xml status scroll delay
Configuration Files aastra.cfg, <mac>.cfg
Status Scroll Delay (seconds)
(in Web UI)
Description
Specifies the length of time, in seconds, that each XML status
message displays on the phone.
Format
Integer
Default Value
Range
5
1 to 25
Example
xml status scroll delay: 3
41-001024-00, Rev 09, Release 1.4.1
21
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You set the scroll delay option in the Aastra Web UI at
Basic Settings->Preferences.
Status Scroll Delay
(seconds)
22
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
XML: AastraIPPhoneExecute Object
A new XML AastraIPPhoneExecute object has been implemented on the IP
phones. This object provides the ability to execute commands on the phone using
XML. Release 1.4.1 supports the following Execute object commands:
•
•
Reset - This command waits until the phone is idle and then executes a reset.
NoOp - This command has no affect on the IP phone. It is made up of a blank
URI. You can use this feature when you need to press a key on the phone to
access a feature, and it is not necessary to display anything.
Since the server forces phone firmware changes, the AastraIPPhoneExecute
object was implemented to send the reset command to the phone.
AastraIPPhoneExecute Object Structure
The AastraIPPhoneExecute object describes the structure of the XML document
that is used to send a command to the phone. It delivers multiple execution
requests to the phone. The basic structure of the AastraIPPhoneExecute object is:
<AastraIPPhoneExecute>
<ExecuteItem URI ="the URL or URI to be executed"/>
<! -- Additional execution items may be added under new ExecuteItem tag-->
</AastraIPPhoneExecute>
41-001024-00, Rev 09, Release 1.4.1
23
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Using the Reset Command
The <ExecuteItem URI =""/> tag can be entered with the command the phone
should execute. Upon receiving an AastraIPPhoneExecute object, the phone
begins executing the URL or URI specified.
The following example shows an AastraIPPhoneExecute object using the Reset
command:
<AastraIPPhoneExecute>
<ExecuteItem URI="Command: Reset"/>
</AastraIPPhoneExecute>
Note: If you specify a command as a URI attribute (instead of a URL),
the keyword "Command" must be prepended in the value of the URI
attribute so that the phone recognizes it as a URI attribute value. If you
enter a URI and leave out the “Command” keyword, the phone interprets
the value in the URI attribute as a URL containing network resources.
The following example shows the AastraIPPhoneExecute object using a URL:
<AastraIPPhoneExecute>
<ExecuteItem URI="http://aastraserver/message.xml"/>
</AastraIPPhoneExecute>
When the phone receives this object, it displays the specified XML URI page.
Using the NoOp Command
You can use the AastraIPPhoneExecute object as an object to create a blank
display (it has no affect on the IP phone). It is made up of a blank URI. You can
use this feature when you need to press a key on the phone to access a feature, and
it is not necessary to display anything.
The following example shows an AastraIPPhoneExecute object using a blank
URI:
<AastraIPPhoneExecute>
<ExecuteItem URI=””/>
<AastraIPPhoneExecute>
24
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
XML: Action URI
This feature provides the administrators the ability to specify a uniform resource
identifier (URI) that triggers a GET when certain events occur. The IP phone
events that support this feature are:
•
•
•
•
•
•
Startup
Successful registration
Incoming call
Outgoing call
Offhook
Onhook
The following table identifies the configurable action URI parameters in the
configuration files and the Aastra Web UI. This table also identifies the variables
that apply to specific parameters.
Configuration File Aastra Web UI Parameters at
Applicable Variables
Parameters
Advanced Settings->Action URI
action uri startup
Startup
-
action uri registered
Successful Registration
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
action uri incoming
Incoming Call
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$INCOMINGNAME$$
action uri outgoing
Outgoing Call
$$REMOTENUMBER$$
$$SIPUSERNAME$$
action uri offhook
action uri onhook
Offhook
Onhook
-
-
41-001024-00, Rev 09, Release 1.4.1
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
How it works
When a startup, successful registration, incoming call, outgoing call,
offhook, or onhook call event occurs on the phone, the phone checks to see if
the event has an action URI configured. If the phones finds a URI configured, any
variables configured (in the form $$VARIABLENAME$$) are replaced with the
value of the appropriate variable. After all of the variables are bound, the phone
executes a GET on the URI. The Action URI binds all variables and is not
dependant on the state of the phone.
For example, if you enter the following string for the action uri outgoing
parameter:
action uri outgoing: http://10.50.10.140/
outgoing.pl?number=$$REMOTENUMBER$$
and you dial out the number 5551212, the phone executes a GET on:
Note: If the phone can’t find the Action URI you specify, it returns a
“NULL” response. For example,
You can configure this feature via the configuration files or the Aastra Web UI.
Configuring via the Configuration Files
You use the following parameters in the configuration files to configure the XML:
action URI.
Parameter –
action uri startup
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Startup
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when a startup
event occurs.
Format
Fully qualified URI
Default Value
Range
Not Applicable
Up to 128 ASCII characters
Example
26
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
action uri registered
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Successful Registration
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when a
successful registration event occurs. This parameter can use the
following variables:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
Format
Fully qualified URI
Not Applicable
Default Value
Range
Up to 128 ASCII characters
Example
name=$$SIPAUTHNAME$$
Parameter –
action uri incoming
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Incoming Call
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when an
incoming call event occurs. This parameter can use the following
variables:
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$INCOMINGNAME$$
Format
Fully qualified URI
Not Applicable
Default Value
Range
Up to 128 ASCII characters
Example
incoming.php?number=$$REMOTENUMBER$$
41-001024-00, Rev 09, Release 1.4.1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Parameter –
action uri outgoing
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Outgoing Call
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when an
outgoing call event occurs. This parameter can use the following
variables:
$$REMOTENUMBER$$
$$SIPUSERNAME$$
Format
Fully qualified URI
Not Applicable
Default Value
Range
Up to 128 ASCII characters
Example
outgoing.php?number=$$REMOTENUMBER$$
Parameter –
action uri offhook
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Offhook
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when an
offhook event occurs.
Note: The only supported use of the offhook action URI is to perform a
GET that returns a NoOp Execute XML object. Although the phone
correctly displays all other returned XML objects, the interaction with
other phone features, such as speeddial, redial, etc., is undefined.
Format
Fully qualified URI
Default Value
Range
Not Applicable
Up to 128 ASCII characters
Example
28
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
action uri onhook
Aastra Web UI
Configuration Files
Advanced Settings->Action URI
aastra.cfg, <mac>.cfg
Onhook
(in Web UI)
Description
Specifies the URI for which the phone executes a GET on when an
onhook event occurs.
Format
Fully qualified URI
Default Value
Range
Not Applicable
Up to 128 ASCII characters
Example
Configuring via the Aastra Web UI
You can set the XML: action parameters in the Aastra Web UI at
Advanced Settings->Action URI.
Action URI parameters
41-001024-00, Rev 09, Release 1.4.1
29
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
XML: Softkey URI
In addition to specifying variables for the Action URIs, you can also specify
variables in the XML softkey URIs that are bound when the key is pressed. These
variables are the same as those used in the Action URIs.
When an administrator enters an XML softkey URI either via the Aastra Web UI
or the configuration files, they can specify the following variables:
•
•
•
•
•
•
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$INCOMINGNAME$$
When the softkey is pressed, if the phone finds a URI configured with variables
(in the form $$VARIABLENAME$$), they are replaced with the value of the
appropriate variable. After all of the variables are bound, the softkey executes a
GET on the URI.
Example
For example, if the administrator specifies an XML softkey with the value:
http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
This softkey executes a GET on:
assuming that the sip username of the specific line is 42512.
You can configure the XML softkey URI variables via the configuration files or
the Aastra Web UI.
30
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Configuring via Configuration Files
You use the following parameters to configure XML softkeys using variable
binding:
•
•
•
•
•
softkeyN type
softkeyN label
softkeyN value
prgkeyN type
prgkeyNvalue
For example, on a 480i/480i CT:
softkey1 type: xml
softkey1 label: JohnSmith
softkey1 value: http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
On a 9112i/9133i:
prgkey1 type: xml
prgkey1 value: http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
41-001024-00, Rev 09, Release 1.4.1
31
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
For 480i/480i CT, you configure XML softkey variable binding at
Operation->Softkeys and XML.
For 9112i/9133i, you configure XML softkey variable binding at
Operation->Programmable Keys.
XML Softkey configured using variable binding
32
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
XML: HTTP Refresh Header
A new HTTP refresh header feature has been implemented on the IP phones. This
feature includes the following:
•
All current XML screen objects have the ability to be refreshed by adding a
Refresh and URL setting to the HTTP headers. (see Refresh setting format
below)
•
The Refresh setting is set by the XML application and it is up to the
application to decide which objects it wants to refresh.
Note: This HTTP refresh header feature only applies to objects that
display to the screen.
The Refresh setting must be included in the HTTP header. The XML application
decides which objects it wants to use with this setting. The phone recognizes this
setting when parsing the HTTP header. If the setting is present, then it passes
along the refresh timeout and the URL to the ParserData object, which all XML
screen objects inherit from. The ParserData class also has a timer, which must be
set to expire at the next refresh time. When the timer expires (time to refresh the
screen), the phone requests the URL again and displays the refreshed screen.
Refresh Setting Format
The following is the Refresh setting format for the HTTP header:
Refresh: <timeout>; URL=<page to load>
The following example is a Refresh setting for use in an HTTP header:
Note: You must use the Refresh and URL parameters in order for this
feature to work in the HTTP header.
41-001024-00, Rev 09, Release 1.4.1
33
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Backup Proxy/Registrar Support
The IP phones now support a backup SIP proxy and backup SIP registrar feature.
If the primary server is unavailable, the phone automatically switches to the
backup server allowing the user's phone to remain in service.
How it Works
All SIP registration messages are sent to the primary registrar first. If the server is
unavailable, then a new registration request is sent to the backup registrar. This
also applies to registration renewal messages, which try the primary server before
the backup.
Similarly, any outgoing calls attempt to use the primary proxy first, then the
backup if necessary. In addition, subscriptions for BLF, BLA, and explicit MWI
can also use the backup proxy when the primary fails. Outgoing calls and the
previously mentioned subscriptions behave the same as registrations, where the
primary proxy is tried before the backup.
You can configure the backup SIP proxy on a global or per-line basis via the
configuration files or the Aastra Web UI.
Configuring via the Configuration Files
You can configure the following parameters for a backup SIP proxy and backup
SIP registrar.
Global parameters
Parameter –
sip backup proxy ip
Aastra Web UI
Advanced Settings->Global SIP->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Proxy Server
(in Web UI)
Description
The IP address of the backup SIP proxy server for which the IP phone
uses when the primary SIP proxy is unavailable.
Format
IP address or fully qualified Domain Name
0.0.0.0
Default Value
Range
Not Applicable
Example
sip backup proxy ip: 192.168.0.102
34
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
sip backup proxy port
Aastra Web UI
Advanced Settings->Global SIP->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Proxy Port
(in Web UI)
Description
Format
The backup proxy’s port number.
Integer
Default Value
Range
0
Not Applicable
Example
sip backup proxy port: 5060
Parameter –
Aastra Web UI
Advanced Settings->Global SIP->
sip backup registrar ip
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Registrar Server
(in Web UI)
Description
The address of the backup registrar (typically, the backup SIP proxy) for
which the IP phone uses to send REGISTER requests if the primary
registrar is unavailable.
A global value of 0.0.0.0 disables backup registration. However, the
phone is still active and you can dial using username@ip address of the
phone.
If the backup registrar IP address is set to 0.0.0.0 for a per-line basis (i.e,
line 1, line 2, etc.), then the backup register request is not sent, the "No
Service" message does not display, and the message waiting indicator
(MWI) does not come on.
Format
IP address or fully qualified Domain Name
0.0.0.0
Default Value
Range
Not Applicable
Example
sip backup registrar ip: 192.168.0.102
41-001024-00, Rev 09, Release 1.4.1
35
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Parameter –
sip backup registrar port
Aastra Web UI
Advanced Settings->Global SIP->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Registrar Port
(in Web UI)
Description
Format
The backup registrar's (typically the backup SIP proxy) port number.
Integer
Default Value
Range
0
Not Applicable
Example
sip backup registrar port: 5060
Per-line parameters
Parameter –
sip linex backup proxy ip
Aastra Web UI
Advanced Settings->LineN->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Proxy Server
(in Web UI)
Description
The IP address of the backup SIP proxy server for which the IP phone
uses when the primary SIP proxy is unavailable.
Format
IP address or fully qualified Domain Name
0.0.0.0
Default Value
Range
Not Applicable
Example
sip line1 backup proxy ip: 192.168.0.102
Parameter –
sip linex backup proxy port
Aastra Web UI
Advanced Settings->LineN->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Proxy Port
(in Web UI)
Description
Format
The backup proxy’s port number.
Integer
Default Value
Range
0
Not Applicable
Example
sip line1 backup proxy port: 5060
36
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
sip linex backup registrar ip
Aastra Web UI
Advanced Settings->LineN->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Registrar Server
(in Web UI)
Description
The address of the backup registrar (typically, the backup SIP proxy) for
which the IP phone uses to send REGISTER requests if the primary
registrar is unavailable.
A global value of 0.0.0.0 disables backup registration. However, the
phone is still active and you can dial using username@ip address of the
phone.
If the backup registrar IP address is set to 0.0.0.0 for a per-line basis (i.e,
line 1, line 2, etc.), then the backup register request is not sent, the "No
Service" message does not display, and the message waiting indicator
(MWI) does not come on.
Format
IP address or fully qualified Domain Name
0.0.0.0
Default Value
Range
Not Applicable
Example
sip line1 backup registrar ip: 192.168.0.102
Parameter –
sip linex backup registrar port
Aastra Web UI
Advanced Settings->LineN->
Basic SIP Network Settings
aastra.cfg, <mac>.cfg
Configuration Files
Backup Registrar Port
(in Web UI)
Description
Format
The backup registrar's (typically the backup SIP proxy) port number.
Integer
Default Value
Range
0
Not Applicable
Example
sip line1 backup registrar port: 5060
41-001024-00, Rev 09, Release 1.4.1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
For global configuration, you can set the backup SIP proxy/registrar parameters at
Advanced Settings->Global SIP->Basic SIP Network Settings.
For per-line configuration, you can set the backup SIP proxy/registrar parameters
at Advanced Settings->LineN->Basic SIP Network Settings.
Backup SIP Proxy/
Registrar Parameters
38
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Auto-discovery Using mDNS
Release 1.4.1 introduces a process that allows the phones to auto-discover all
servers on a network using mDNS. When the IP phone discovers a TFTP server, it
is automatically configured by that TFTP server.
An unconfigured phone (phone right out of the box) added to a network, attempts
to auto-discover a configuration server on the network without any end-user
intervention. When it receives DHCP option 66 (TFTP server), it automatically
gets configured by the TFTP server.
An already configured phone (either previously configured by auto-discovery or
manually configured) added to a network, uses its predefined configuration to
boot up.
Notes:
1. Configuration parameters received via DHCP do not constitute
configuration information, with the exception of a TFTP server.
Therefore, you can plug a phone into a DHCP environment, still use the
auto-discovery process, and still allow the use of the TFTP server
parameter to set the configuration server.
2. DHCP option 66 (TFTP server details) overrides the mDNS phase of
the auto-discovery. Therefore, the DHCP option takes priority and the
remaining process of auto-discovery continues.
3. As the phone performs auto-discovery, all servers in the network
(including the TFTP server), display in the phone window. However, only
the server configured for TFTP automatically configures the phone.
41-001024-00, Rev 09, Release 1.4.1
39
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
IP Phone Features for Sylantro Servers
Last Call Return (lcr) Support
A new feature has been added to the IP phones that allow a user or administrator
to configure a "last call return" function on a softkey or programmable key.
This feature is for Sylantro servers only.
You can configure the “lcr” softkey feature via the configuration files and the
Aastra Web UI.
How it works
If you configure "lcr" on a softkey or programmable key, and a call comes
into your phone, after you are finished with the call and hang up, you can
press the key configured for “lcr” and the phone dials the last call you received.
When you configure an “lcr” softkey, the label “LCR” displays next to that
softkey on the IP phone. When the Sylantro server detects an “lcr” request, it
translates this request and routes the call to the last caller.
For the 480i/480i CT, applicable parameters to configure for “lcr” are:
•
•
•
softkeyN type (“Type” in Web UI)
softkeyN line (“Line” in Web UI)
softkeyN states (“Idle, Connected, Incoming, Outgoing” in Web UI)
For the 9112i/9133i, applicable parameters to configure for “lcr” are:
•
•
prgkeyN type (“Type” in Web UI)
prgkeyN line (“Line” in Web UI)
Note: For more information about “lcr” see the
SIP IP Phone Administrator Guide, Release 1.4.1.
40
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Support for additional “Alert Info” keywords for distinctive ringing
New configurable, distinctive ringing support has been added to release 1.4.1 for
Sylantro servers. The following “info” parameters allow you to configure specific
priority alert tones for each parameter that may appear as keywords in the
“Alert-Info” header of a Sylantro server:
•
•
•
•
•
alert-acd (auto call distribution)
alert-community-1
alert-community-2
alert-community-3
alert-community-4
You can configure these priority alert parameters via the configuration files or the
Aastra Web UI.
Configuring via the Configuration Files
In addition to the priority alert parameters that already exist (from previous
releases), you can also now configure the following parameters for priority
alerting.
Parameter –
alert auto call distribution
Aastra Web UI
Basic Settings->Preferences->
Priority Alerting Settings
aastra.cfg, <mac>.cfg
Configuration Files
auto call distribution
(in Web UI)
Description
When an "alert-acd" keyword appears in the header of the INVITE
request, the configured Bellcore ring tone is applied to the IP phone.
Format
Integer
Default Value
Range
0
Normal ringing
0
1
2
3
4
5
Normal ringing (default)
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
Silent
Example
alert auto call distribution: 2
41-001024-00, Rev 09, Release 1.4.1
41
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Parameter –
alert community 1
Aastra Web UI
Basic Settings->Preferences->
Priority Alerting Settings
aastra.cfg, <mac>.cfg
Configuration Files
community-1
(in Web UI)
Description
When an "alert community-1” keyword appears in the header of the
INVITE request, the configured Bellcore ring tone is applied to the IP
phone.
Format
Integer
Default Value
Range
0
Normal ringing
0
1
2
3
4
5
Normal ringing (default)
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
Silent
Example
alert community 1: 3
Parameter –
alert community 2
Aastra Web UI
Basic Settings->Preferences->
Priority Alerting Settings
aastra.cfg, <mac>.cfg
Configuration Files
community-2
(in Web UI)
Description
When an "alert community-2” keyword appears in the header of the
INVITE request, the configured Bellcore ring tone is applied to the IP
phone.
Format
Integer
Default Value
Range
0
Normal ringing
0
1
2
3
4
5
Normal ringing (default)
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
Silent
Example
alert community 2: 4
42
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
alert community 3
Aastra Web UI:
Basic Settings->Preferences->
Priority Alerting Settings
aastra.cfg, <mac>.cfg
Configuration Files:
community-3
(in Web UI)
Description
When an "alert community-3” keyword appears in the header of the
INVITE request, the configured Bellcore ring tone is applied to the IP
phone.
Format
Integer
Default Value
Range
0
Normal ringing
0
1
2
3
4
5
Normal ringing (default)
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
Silent
Example
alert community 3: 1
Parameter –
alert community 4
Aastra Web UI:
Basic Settings->Preferences->
Priority Alerting Settings
aastra.cfg, <mac>.cfg
Configuration Files:
community-4
(in Web UI)
Description
When an "alert community-4” keyword appears in the header of the
INVITE request, the configured Bellcore ring tone is applied to the IP
phone.
Format
Integer
Default Value
Range
0
Normal ringing
0
1
2
3
4
5
Normal ringing (default)
Bellcore-dr2
Bellcore-dr3
Bellcore-dr4
Bellcore-dr5
Silent
Example
alert community 4: 2
41-001024-00, Rev 09, Release 1.4.1
43
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
Configuring via the Aastra Web UI
You can configure the new parameters for priority alerting in the Aastra Web UI at
Advanced Settings->Action URI.
New priority alert parameters
44
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Startup Enhancement
During startup, the maximum time the phone spends attempting to contact the
configuration server (TFTP, FTP or HTTP) has been reduced from 10 minutes to
approximately 30 seconds.
When the phone boots up, it attempts to contact the configuration server (if the
configuration server parameters are configured on the phone), for 4 seconds. The
phone then displays a “Skip” button. After an additional 30 seconds has expired,
or if the user presses the “Skip” button, the phone continues the boot process
using the stored configuration.
At any point during this period, if the phone successfully contacts the
configuration server, it automatically continues and attempts to download its
configuration and any new firmware from that server.
41-001024-00, Rev 09, Release 1.4.1
45
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
480i CT Only
Single Call Restriction (480i CT only)
A new feature has been implemented on the 480i CT that allows an administrator
to enable or disable a single call restriction between the 480i CT base unit and a
call server.
When this feature is enabled (set to 1), you can make separate active calls from
the 480i CT base unit and from the cordless handset. If this feature is disabled (set
to 0), only one call can be active at a time either from the base unit or from the
handset. When this feature is disabled, and you make an active call on either the
base unit or the handset, any other attempt to make an active call is put on hold.
Also, when this feature is disabled, more than one call can negotiate complex
audio codecs since only a single call is decoding audio at a time.
You can configure this feature via the configuration files or the Aastra Web UI.
Configuring via the Configuration Files
You can configure the following parameter for the 480i CT single media path
restriction.
Parameter –
two call support
Aastra Web UI
Configuration Files
Advanced Settings->Global SIP->RTP Settings
aastra.cfg, <mac>.cfg
Two Call Support
(in Web UI)
Description
Enables or disables the single media path restriction between the
480i CT base unit and the handset.
When this feature is enabled (set to 1), you can make separate active
calls from the 480i CT base unit and from the cordless handset. If this
feature is disabled (set to 0), only one call can be active at a time either
from the base unit or from the handset.
When this feature is disabled, and you make an active call on either the
base unit or the handset, any other attempt to make an active call is put
on hold. Also, when this feature is disabled, more than one call can
negotiate complex audio codecs since only a single call is decoding
audio at a time.
Format
Boolean
46
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Default Value
Range
1
0 - Disable
1 - Enable
Example
two call support: 0
Configuring via the Aastra Web UI
You can enable or disable the 480i CT single media path restriction at Advanced
Settings->Global SIP->RTP Settings.
Two Call Support
41-001024-00, Rev 09, Release 1.4.1
47
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
New Features in 1.4.1
9112i/9133i Only
Addition of DisplayName1 & DisplayName2 (now also applies to 9112i/
9133i)
The 9112i/9133i IP phones now support the use of displayName1 and
displayName2. The value in these fields display on the idle screen of the IP
phone. Previous IP phone releases supported these parameters on the
480i/480i CT only.
You can configure these parameters via the configuration files or the Aastra Web
UI.
Configuring via the Configuration Files
You use the following parameters in the configuration files to configure
displayName1 & displayName2.)
Parameter –
displayName1
Aastra Web UI
Configuration Files
Basic Settings->Preferences
aastra.cfg, <mac>.cfg
Idle Display Name 1
(in Web UI)
Description
The name displayed on the idle screen rather than the screen name and
phone number
Format
Alphanumeric characters
Not Applicable
Default Value
Range
For 480i/480i CT:
Up to 21 characters (width of LCD)
For 9112i/9133i:
Up to 16 characters (width of LCD)
Example
displayName1: SIPphone1
48
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
Parameter –
displayName2
Aastra Web UI
Configuration Files
Basic Settings->Preferences
aastra.cfg, <mac>.cfg
Idle Display Name 2
(in Web UI)
Description
The name displayed on the idle screen rather than the screen name and
phone number
Format
Alphanumeric characters
Not Applicable
Default Value
Range
For 480i/480i CT:
Up to 21 characters (width of LCD)
For 9112i/9133i:
Up to 16 characters (width of LCD)
Example
displayName2: SIPphone2
Configuring via the Aastra Web UI
On the 9112i/9133i, you can configure Idle Display Name 1& Idle Display Name
2 in the Aastra Web UI at Basic Settings->Preferences->General.
Idle Display Name 1
Idle Display Name 2
41-001024-00, Rev 09, Release 1.4.1
49
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
Issues Resolved in Release 1.4.1
Issues Resolved in Release 1.4.1
Description
This section describes the issues resolved in release 1.4.1. The following table
provides the issue number and a brief description of each fix.
Note: Unless specifically indicated, these resolved issues apply to all
phone models.
Issue Number
Description of Fix
CLN04606
With the 480i, the phone no longer hangs on startup when global call park and call
pickup keys are configured.
CLN04933
DEF04090
DEF04096
DEF04174
The IP phones no longer crash during transfers using BroadWorks release 1.2.
Phone no longer adds extra “/” in XML requests.
The cordless handsets now support sending DTMF events as INFO packets.
The message “No Service” no longer appears momentarily on the 480i during
registration. A parameter “sip registration renewal timer” has been added that allows
you to set the time, in seconds, prior to the expiration of when the registration is
renewed.
DEF04175
DEF04178
DEF04188
Ringing is no longer interrupted by the BLF ringing alert tone.
Added support for URI dialing to the 9133i programmable keys.
The Calls between the cordless handset and the base now get a voice path when
the call is not made using the intercom function.
DEF04210
DEF04234
When the media port is equal to 0 in the INVITE, the phone no longer sends “486
Busy Here” after sending “180 Ringing when using a MetaSwtich.
The IP phones no longer reject calls when receiving an attribute in SDP that it didn’t
recognize. It now correctly ignores those attributes. This fixes an issue with the
Eyebeam soft client.
DEF04302
DEF04450
DEF04545
You can now toggle to handsfree while on hold.
When using the Aastra Web UI, the dial plan no longer truncates at 85 characters.
The hangup key now returns dialtone when the handset stays off hook. With the 480i
CT, the y
key now acts consistently across all phones.
50
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
Issues Resolved in Release 1.4.1
Issue Number
Description of Fix
DEF04757
The call transfer (Xfer) function was not working with Broadsoft SCA using multiple
headers. The call transfer now works on an SCA line with Broadsoft R13.
DEF05117
If the CODEC negotiation fails during the processing of a re-INVITE, the phone no
longer drops the call, but instead responds with a “488 Not Acceptable Here”
message.
Enhancements/Changes
This section describes the enhancements and changes made to the 1.4.1 release..
Note: Unless specifically indicated, these enhancements apply to all
phone models.
Issue Number
Description of Fix
DEF04638
ENH04358
XML URIs now support adding a port number to the URI.
Added ability to change debug level from Aastra Web UI. You can now configure a
“log level” in the Troubleshooting section of the Web interface.
ENH04371
Web recovery now resets the administrator password and removes local
configuration files. You force the phone into recovery mode by holding ‘#’ and ‘1’ on
startup.
41-001024-00, Rev 09, Release 1.4.1
51
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone Release Notes 1.4.1
Known Anomalies in 1.4.1
Known Anomalies in 1.4.1
Description
This section describes the known anomalies in release 1.4.1.
Note: Unless specifically indicated, these known anomalies apply to all
phone models.
Issue Number
Description
DEF04448
DEF04535
DEF04899
DEF04912
DEF05019
SIP contact URI is not used in subsequent REFER-TO address.
The TO field displays your own name during an originated call.
In XML APIs, password is not hidden when it is marked as not editable.
Sending a lot of messages (hundreds) within a second, causes the phone to lock up.
The previous IP Phone release 1.4 shows the softkeys for the XML
AastraIPPhoneInputScreen object as:
•
•
•
•
•
•
1 = Backspace
2 = Dot
3 = ChangeCase
4 = Numeric/Alpha
5 = Cancel
6 = Done
This is incorrect. For softkeys 5 and 6, the key assignment is:
•
•
5 = Done
6 = Cancel
DEF05056
ENH05218
An incoming intercom call changes the current audio mode (speaker/headset) of
existing calls.
When dialing a number on the phone and another call comes in, the phone rings and
the digits you dialed are lost.
52
41-001024-00, Rev 09, Release 1.4.1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
Contacting Aastra Telecom Support
Contacting Aastra Telecom Support
If you’ve read this release note, and consulted the Troubleshooting section of your
phone model’s manual and still have problems, please send inquiries via email to
41-001024-00, Rev 09, Release 1.4.1
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Generic SIP IP Phone
Models 4801, 480i CT, 9112i, 9133i
1.4.1 Release Notes
Copyright © 2005-2006 Aastra Telecom. All rights reserved. Information in this document is
subject to change without notice. Aastra Telecom assumes no responsibility for any errors that
may appear in this document. Product capabilities described in this document pertain solely to
Aastra Telecom's marketing activities in the U.S. and Canada. Availability in other markets may
vary.
41-001024-00 Rev 09
SIP IP Phones Release 1.4.1
November 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|