| 	
		 C 414 B/ULS   
					Large Diaphragm Condenser Microphone   
					Description   
					The AKG Model C 414 B/ULS is certainly the most   
					ubiquitous studio condenser microphone in the United States,   
					and very likely in the rest of the world as well. It is designed   
					around dual back-to-back large 1 in. (25 mm) gold sputtered   
					diaphragms for multiple pickup patterns. The microphone's   
					pickup patterns are easily switchable among omnidirectional,   
					cardioid, hypercardioid, and figure-eight. Additional flexibility   
					in the studio operating environment allows a bass cut of   
					12 dB/octave below 150 or 75 Hz and pre-preamp attenuation   
					of either 10 or 20 dB. The self noise of the microphone is a   
					low 14 dB (A weighted). On-axis sensitivity for all patterns is   
					12.5 mV/Pa, and for unpadded operation maximum program   
					level is 140 dB for 0.5% total harmonic distortion.   
					The C 414 B/ULS is one of the most accurate multi-pattern   
					microphones available to the engineer. The far-field on-axis   
					response for all four switchable patterns is remarkably flat,   
					varying no more than +/-2 dB over the range from 20 to 20 kHz.   
					Specifications   
					Transducer Principle: Condenser, externally polarized   
					H 100   
					Frequency Range:   
					Polar Pattern:   
					20–20,000 Hz   
					Omnidirectional, cardioid, hypercardioid,   
					and figure-eight   
					Sensitivity at 1,000 Hz: 12.5 mV/Pa =^ -38 dBV   
					Equivalent Noise Level: 14 dB-A   
					Features   
					Sound Pressure Level for 0.5% THD:   
					134 dB, wide-band (unpadded)   
					140 dB, 1 kHz (unpadded)   
					• One of the world's most celebrated   
					studio condenser microphones   
					• Large 25 millimeter gold sputtered   
					diaphragm format optimized for   
					studio applications   
					• Dual diaphragm for multiple   
					polar patterns   
					• High acoustic level capability   
					(140 dB-SPL for 0.5% THD)   
					S/N Ratio (A-weighted): 80 dB   
					Electr. Impedance:   
					Load Impedance:   
					Power Requirement:   
					180 ohms   
					> 1,000 ohms   
					12–48 volts nominal   
					Phantom powering   
					Connector:   
					Finish:   
					3-pin XLR type   
					Non-reflective black   
					Size:   
					5.6 x 1.8 x 1.4 in. (141 x 45 x 35 mm)   
					Net/Shipping Weight: 11 oz. (320 g)/2.1 lbs. (950 g)   
					• Low self noise (14 dB-A)   
					Included Accessories: H 100 Elastic Suspension   
					W 414 Windscreen   
					Optional Accessories: SA 18/3 B Stand Adapter   
					B 18 Battery supply unit   
					N 62 E Power supply   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |