| nrf`h=obcbobk`b=drfab=   jfqbi   Turning the Handset On/Off   Transferring a Call   1. Press the More softkey.   1. Press and hold the On-hook key   until   RSMP=táêÉäÉëë=e~åÇëÉí   2. Select New Call.   “Switch on/off is displayed.   3. Dial the number to which you want to transfer   2. Press “Yes/No.”   1 Earpiece Speaker   the call and press Call.   Making a Call   2 Softkeys   4. Select Release to connect the two parties.   3 Off-Hook Key   OR   Dial the number and press   . The name of   4 Voice Mail Access   5 Key Lock and Upper/Lower Case   6 Space   Wait for an answer, announce the transfer   and then select Release.   the called party is displayed if available.   OR   Conference   Press   to open the call list and use the   7 Microphone   1. Press the More softkey.   Navigation key to scroll the list of your last   8 Sound Off Key   9 Tactile Indicators   10 On-Hook and On/Off Key   11 Navigation Keys   12 Display   2. Select New Call to put the current call on   twenty calls. Press   OR   to dial.   hold.   3. Dial the number of the third party.   4. Wait for an answer.   1. Press the Menu softkey.   2. Select Contacts, and select Call contact.   3. Select contact from list.   5. Press More and then select Join to   conference all the parties together.   13 Headset Connector   14 LED   4. 4. Press   or Call to dial the number.   Rejecting a Call   Answering a Call   • When the ring signal sounds, press   Call information will be stored in the Call list.   • Press   to answer a call in normal mode.   Display Icons   Signal Strength Indicator   Adjusting Volume Levels   OR   Voice Mail   To adjust earpiece volume   during a call:   • Press the   Handsfree key to answer in   Battery Icon (fully charged)   Battery Icon (discharged)   Keypad Locked   speaker mode.   • Press upper and lower navigation key arrows   to increase/decrease volume.   Phone Lock   Ending a Call   Microphone Muted   To change ringer volume:   Sound Off   • Press   to end a call.   Missed Call   • In the menu, select Settings.   Loudspeaker On   Loudspeaker Off   Microphone Off   Placing a call on Hold   • • • Select Sound & Alerts.   1. Press the More softkey.   Incoming Call   Select Volume.   2. Select Hold/Retrieve to put the call on hold.   Outgoing Call   Use the navigation key arrows to adjust   selected volume and press Back to save.   To retrieve the Held call:   System Connection   Headset Connected   1. Press the More softkey.   To turn Loudspeaker on/off:   2. Select Hold/Retrieve to retrieve the call on   • Press the Handsfree key   during a call.   before or   hold.   j=jáíÉä=EÇÉëáÖåF=áë=~=êÉÖáëíÉêÉÇ=íê~ÇÉã~êâ=çÑ=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK==«=OMNNI=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK=^ää=çíÜÉê=éêçÇìÅíë=~åÇ=ëÉêîáÅÉë=~êÉ=íÜÉ=íê~ÇÉã~êâë=çÑ=íÜÉáê=êÉëéÉÅíáîÉ=ÜçäÇÉêëK=^ää=êáÖÜíë=êÉëÉêîÉÇK   |